No credit given for [2682]

[PantherX]

My guess is that it is the downloaded WU because the wuresult for bigadv is ~100 MB

[Borgis]

Whera are my credits?

Code: Select all

[19:02:28] + Attempting to send results [August 10 19:02:28 UTC]
[19:02:28] - Reading file work/wuresults_04.dat from core
[19:02:28]   (Read 95875623 bytes from disk)
[19:02:28] Connecting to http://171.67.108.22:8080/
[19:11:10] Posted data.
[19:11:11] Initial: 0000; - Uploaded at ~179 kB/s
[19:11:11] - Averaged speed for that direction ~107 kB/s
[19:11:11] + Results successfully sent
[19:11:11] Thank you for your contribution to Folding@Home.
[19:11:11] + Number of Units Completed: 25

[19:11:18] + Sent 1 of 1 completed units to the server
[19:11:18] + Closed connections

Michał

[thegrub]

Same here, no credit given. I expect that credit will not be given because they did not receive the unit back. Just one of those things with a beta. Interesting error catching philosophy though: When an error occurs that we were not looking for, continue on as you would as if everything was working just as it was expected to work.

• [21:07:09] Sending work to server
  [21:07:09] Project: 2682 (Run 6, Clone 0, Gen 18)
  [21:07:09] + Attempting to send results [August 10 21:07:09 UTC]
  [21:07:09] - Reading file work/wuresults_02.dat from core
  [21:07:10] (Read 95839717 bytes from disk)
  [21:07:10] Connecting to http://171.67.108.22:8080/
  [21:26:45] Posted data.
  [21:26:45] Initial: 0000; - Uploaded at ~79 kB/s
  [21:26:45] - Averaged speed for that direction ~79 kB/s
  [21:26:45] + Results successfully sent

[jpeck2009]

I'm having the same issue for this project. Completed it early this morning, but not credit was counted.

My log shows that there was some issues sending, but eventually it completed. Tried forcing the updated a few minutes ago, but that did not work... help!

Here is my log file:

Code: Select all

[17:59:04] + Processing work unit
[17:59:04] Core required: FahCore_a3.exe
[17:59:04] Core found.
[17:59:04] Working on queue slot 06 [August 8 17:59:04 UTC]
[17:59:04] + Working ...
[17:59:04] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 06 -np 8 -checkpoint 15 -verbose -lifeline 8464 -version 629'

[17:59:05] 
[17:59:05] *------------------------------*
[17:59:05] Folding@Home Gromacs SMP Core
[17:59:05] Version 2.19 (Mar 12, 2010)
[17:59:05] 
[17:59:05] Preparing to commence simulation
[17:59:05] - Looking at optimizations...
[17:59:05] - Created dyn
[17:59:05] - Files status OK
[18:00:28] - Expanded 30329174 -> 159726549 (decompressed 101.8 percent)
[18:00:28] Called DecompressByteArray: compressed_data_size=30329174 data_size=159726549, decompressed_data_size=159726549 diff=0
[18:00:29] - Digital signature verified
[18:00:29] 
[18:00:29] Project: 2682 (Run 6, Clone 28, Gen 18)
[18:00:29] 
[18:00:30] Assembly optimizations on if available.
[18:00:30] Entering M.D.
[18:00:53] Completed 0 out of 250000 steps  (0%)
[18:37:25] Completed 2500 out of 250000 steps  (1%)
[19:13:46] Completed 5000 out of 250000 steps  (2%)
[19:50:07] Completed 7500 out of 250000 steps  (3%)
[20:26:28] Completed 10000 out of 250000 steps  (4%)
[20:37:34] - Autosending finished units... [August 8 20:37:34 UTC]
[20:37:34] Trying to send all finished work units
[20:37:34] + No unsent completed units remaining.
[20:37:34] - Autosend completed
[21:02:48] Completed 12500 out of 250000 steps  (5%)
[21:39:07] Completed 15000 out of 250000 steps  (6%)
[22:15:30] Completed 17500 out of 250000 steps  (7%)
[22:51:52] Completed 20000 out of 250000 steps  (8%)
[23:28:14] Completed 22500 out of 250000 steps  (9%)
[00:04:37] Completed 25000 out of 250000 steps  (10%)
[00:41:00] Completed 27500 out of 250000 steps  (11%)
[01:17:21] Completed 30000 out of 250000 steps  (12%)
[01:54:53] Completed 32500 out of 250000 steps  (13%)
[02:32:52] Completed 35000 out of 250000 steps  (14%)
[02:37:33] - Autosending finished units... [August 9 02:37:33 UTC]
[02:37:33] Trying to send all finished work units
[02:37:33] + No unsent completed units remaining.
[02:37:33] - Autosend completed
[03:10:51] Completed 37500 out of 250000 steps  (15%)
[03:48:54] Completed 40000 out of 250000 steps  (16%)
[04:26:50] Completed 42500 out of 250000 steps  (17%)
[05:04:54] Completed 45000 out of 250000 steps  (18%)
[05:42:55] Completed 47500 out of 250000 steps  (19%)
[06:20:54] Completed 50000 out of 250000 steps  (20%)
[06:58:52] Completed 52500 out of 250000 steps  (21%)
[07:36:51] Completed 55000 out of 250000 steps  (22%)
[08:14:57] Completed 57500 out of 250000 steps  (23%)
[08:37:31] - Autosending finished units... [August 9 08:37:31 UTC]
[08:37:31] Trying to send all finished work units
[08:37:31] + No unsent completed units remaining.
[08:37:31] - Autosend completed
[08:53:32] Completed 60000 out of 250000 steps  (24%)
[09:31:43] Completed 62500 out of 250000 steps  (25%)
[10:09:58] Completed 65000 out of 250000 steps  (26%)
[10:48:22] Completed 67500 out of 250000 steps  (27%)
[11:26:56] Completed 70000 out of 250000 steps  (28%)
[12:05:27] Completed 72500 out of 250000 steps  (29%)
[12:43:51] Completed 75000 out of 250000 steps  (30%)
[13:21:50] Completed 77500 out of 250000 steps  (31%)
[13:59:50] Completed 80000 out of 250000 steps  (32%)
[14:37:30] - Autosending finished units... [August 9 14:37:30 UTC]
[14:37:30] Trying to send all finished work units
[14:37:30] + No unsent completed units remaining.
[14:37:30] - Autosend completed
[14:37:53] Completed 82500 out of 250000 steps  (33%)
[15:15:47] Completed 85000 out of 250000 steps  (34%)
[15:54:03] Completed 87500 out of 250000 steps  (35%)
[16:34:49] Completed 90000 out of 250000 steps  (36%)
[17:15:26] Completed 92500 out of 250000 steps  (37%)
[17:56:17] Completed 95000 out of 250000 steps  (38%)
[18:36:50] Completed 97500 out of 250000 steps  (39%)
[19:17:26] Completed 100000 out of 250000 steps  (40%)
[19:58:00] Completed 102500 out of 250000 steps  (41%)
[20:37:29] - Autosending finished units... [August 9 20:37:29 UTC]
[20:37:29] Trying to send all finished work units
[20:37:29] + No unsent completed units remaining.
[20:37:29] - Autosend completed
[20:38:40] Completed 105000 out of 250000 steps  (42%)
[21:19:19] Completed 107500 out of 250000 steps  (43%)
[21:59:55] Completed 110000 out of 250000 steps  (44%)
[22:40:37] Completed 112500 out of 250000 steps  (45%)
[23:21:34] Completed 115000 out of 250000 steps  (46%)
[00:02:25] Completed 117500 out of 250000 steps  (47%)
[00:43:09] Completed 120000 out of 250000 steps  (48%)
[01:23:45] Completed 122500 out of 250000 steps  (49%)
[02:04:15] Completed 125000 out of 250000 steps  (50%)
[02:37:27] - Autosending finished units... [August 10 02:37:27 UTC]
[02:37:27] Trying to send all finished work units
[02:37:27] + No unsent completed units remaining.
[02:37:27] - Autosend completed
[02:44:56] Completed 127500 out of 250000 steps  (51%)
[03:25:21] Completed 130000 out of 250000 steps  (52%)
[04:06:09] Completed 132500 out of 250000 steps  (53%)
[04:46:50] Completed 135000 out of 250000 steps  (54%)
[05:27:26] Completed 137500 out of 250000 steps  (55%)
[06:08:10] Completed 140000 out of 250000 steps  (56%)
[06:48:55] Completed 142500 out of 250000 steps  (57%)
[07:29:28] Completed 145000 out of 250000 steps  (58%)
[08:10:13] Completed 147500 out of 250000 steps  (59%)
[08:37:26] - Autosending finished units... [August 10 08:37:26 UTC]
[08:37:26] Trying to send all finished work units
[08:37:26] + No unsent completed units remaining.
[08:37:26] - Autosend completed
[08:51:29] Completed 150000 out of 250000 steps  (60%)
[09:32:58] Completed 152500 out of 250000 steps  (61%)
[10:13:36] Completed 155000 out of 250000 steps  (62%)
[10:54:05] Completed 157500 out of 250000 steps  (63%)
[11:34:42] Completed 160000 out of 250000 steps  (64%)
[12:15:23] Completed 162500 out of 250000 steps  (65%)
[12:55:54] Completed 165000 out of 250000 steps  (66%)
[13:36:37] Completed 167500 out of 250000 steps  (67%)
[14:17:05] Completed 170000 out of 250000 steps  (68%)
[14:37:24] - Autosending finished units... [August 10 14:37:24 UTC]
[14:37:24] Trying to send all finished work units
[14:37:24] + No unsent completed units remaining.
[14:37:24] - Autosend completed
[14:57:22] Completed 172500 out of 250000 steps  (69%)
[15:36:05] Completed 175000 out of 250000 steps  (70%)
[16:14:42] Completed 177500 out of 250000 steps  (71%)
[16:53:24] Completed 180000 out of 250000 steps  (72%)
[17:32:05] Completed 182500 out of 250000 steps  (73%)
[18:10:41] Completed 185000 out of 250000 steps  (74%)
[18:49:21] Completed 187500 out of 250000 steps  (75%)
[19:27:53] Completed 190000 out of 250000 steps  (76%)
[20:06:24] Completed 192500 out of 250000 steps  (77%)
[20:37:23] - Autosending finished units... [August 10 20:37:23 UTC]
[20:37:23] Trying to send all finished work units
[20:37:23] + No unsent completed units remaining.
[20:37:23] - Autosend completed
[20:44:48] Completed 195000 out of 250000 steps  (78%)
[21:23:19] Completed 197500 out of 250000 steps  (79%)
[22:02:01] Completed 200000 out of 250000 steps  (80%)
[22:40:36] Completed 202500 out of 250000 steps  (81%)
[23:19:10] Completed 205000 out of 250000 steps  (82%)
[23:57:51] Completed 207500 out of 250000 steps  (83%)
[00:36:26] Completed 210000 out of 250000 steps  (84%)
[01:14:52] Completed 212500 out of 250000 steps  (85%)
[01:52:51] Completed 215000 out of 250000 steps  (86%)
[02:30:48] Completed 217500 out of 250000 steps  (87%)
[02:37:22] - Autosending finished units... [August 11 02:37:22 UTC]
[02:37:22] Trying to send all finished work units
[02:37:22] + No unsent completed units remaining.
[02:37:22] - Autosend completed
[03:09:08] Completed 220000 out of 250000 steps  (88%)
[03:47:48] Completed 222500 out of 250000 steps  (89%)
[04:26:21] Completed 225000 out of 250000 steps  (90%)
[05:04:52] Completed 227500 out of 250000 steps  (91%)
[05:43:27] Completed 230000 out of 250000 steps  (92%)
[06:22:03] Completed 232500 out of 250000 steps  (93%)
[07:00:38] Completed 235000 out of 250000 steps  (94%)
[07:39:20] Completed 237500 out of 250000 steps  (95%)
[08:17:33] Completed 240000 out of 250000 steps  (96%)
[08:37:20] - Autosending finished units... [August 11 08:37:20 UTC]
[08:37:20] Trying to send all finished work units
[08:37:20] + No unsent completed units remaining.
[08:37:20] - Autosend completed
[08:55:58] Completed 242500 out of 250000 steps  (97%)
[09:33:56] Completed 245000 out of 250000 steps  (98%)
[10:11:55] Completed 247500 out of 250000 steps  (99%)
[10:49:56] Completed 250000 out of 250000 steps  (100%)
[10:50:08] DynamicWrapper: Finished Work Unit: sleep=10000
[10:50:18] 
[10:50:18] Finished Work Unit:
[10:50:18] - Reading up to 52713120 from "work/wudata_06.trr": Read 52713120
[10:50:18] trr file hash check passed.
[10:50:18] - Reading up to 42753392 from "work/wudata_06.xtc": Read 42753392
[10:50:19] xtc file hash check passed.
[10:50:19] edr file hash check passed.
[10:50:19] logfile size: 211729
[10:50:19] Leaving Run
[10:50:20] - Writing 95846185 bytes of core data to disk...
[10:50:23]   ... Done.
[10:51:01] - Shutting down core
[10:51:01] 
[10:51:01] Folding@home Core Shutdown: FINISHED_UNIT
[10:51:08] CoreStatus = 64 (100)
[10:51:08] Unit 6 finished with 55 percent of time to deadline remaining.
[10:51:08] Updated performance fraction: 0.652135
[10:51:08] Sending work to server
[10:51:08] Project: 2682 (Run 6, Clone 28, Gen 18)


[10:51:08] + Attempting to send results [August 11 10:51:08 UTC]
[10:51:08] - Reading file work/wuresults_06.dat from core
[10:51:09]   (Read 95846185 bytes from disk)
[10:51:09] Connecting to http://171.67.108.22:8080/
[10:51:10] - Couldn't send HTTP request to server
[10:51:10] + Could not connect to Work Server (results)
[10:51:10]     (171.67.108.22:8080)
[10:51:10] + Retrying using alternative port
[10:51:10] Connecting to http://171.67.108.22:80/
[10:51:11] - Couldn't send HTTP request to server
[10:51:11] + Could not connect to Work Server (results)
[10:51:11]     (171.67.108.22:80)
[10:51:11] - Error: Could not transmit unit 06 (completed August 11) to work server.
[10:51:11] - 1 failed uploads of this unit.
[10:51:11]   Keeping unit 06 in queue.
[10:51:11] Trying to send all finished work units
[10:51:11] Project: 2682 (Run 6, Clone 28, Gen 18)


[10:51:11] + Attempting to send results [August 11 10:51:11 UTC]
[10:51:11] - Reading file work/wuresults_06.dat from core
[10:51:11]   (Read 95846185 bytes from disk)
[10:51:11] Connecting to http://171.67.108.22:8080/
[10:51:12] - Couldn't send HTTP request to server
[10:51:12] + Could not connect to Work Server (results)
[10:51:12]     (171.67.108.22:8080)
[10:51:12] + Retrying using alternative port
[10:51:12] Connecting to http://171.67.108.22:80/
[10:51:14] - Couldn't send HTTP request to server
[10:51:14] + Could not connect to Work Server (results)
[10:51:14]     (171.67.108.22:80)
[10:51:14] - Error: Could not transmit unit 06 (completed August 11) to work server.
[10:51:14] - 2 failed uploads of this unit.


[10:51:14] + Attempting to send results [August 11 10:51:14 UTC]
[10:51:14] - Reading file work/wuresults_06.dat from core
[10:51:14]   (Read 95846185 bytes from disk)
[10:51:14] Connecting to http://171.67.108.25:8080/
[10:51:37] - Couldn't send HTTP request to server
[10:51:37] + Could not connect to Work Server (results)
[10:51:37]     (171.67.108.25:8080)
[10:51:37] + Retrying using alternative port
[10:51:37] Connecting to http://171.67.108.25:80/
[10:51:49] Posted data.
[10:51:49] Initial: 0000; + Could not connect to Work Server (results)
[10:51:49]     (171.67.108.25:80)
[10:51:49]   Could not transmit unit 06 to Collection server; keeping in queue.
[10:51:49] + Sent 0 of 1 completed units to the server
[10:51:49] - Preparing to get new work unit...
[10:51:49] Cleaning up work directory
[10:51:54] + Attempting to get work packet
[10:51:54] Passkey found
[10:51:54] - Will indicate memory of 6134 MB
[10:51:54] - Connecting to assignment server
[10:51:54] Connecting to http://assign.stanford.edu:8080/
[10:51:54] Posted data.
[10:51:54] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[10:51:54] + News From Folding@Home: Welcome to Folding@Home
[10:51:54] Loaded queue successfully.
[10:51:54] Connecting to http://171.67.108.22:8080/
[10:52:05] Posted data.
[10:52:05] Initial: 0000; - Receiving payload (expected size: 24836084)
[10:54:20] - Downloaded at ~179 kB/s
[10:54:20] - Averaged speed for that direction ~147 kB/s
[10:54:20] + Received work.
[10:54:21] Trying to send all finished work units
[10:54:21] Project: 2682 (Run 6, Clone 28, Gen 18)


[10:54:21] + Attempting to send results [August 11 10:54:21 UTC]
[10:54:21] - Reading file work/wuresults_06.dat from core
[10:54:21]   (Read 95846185 bytes from disk)
[10:54:21] Connecting to http://171.67.108.22:8080/
[11:03:08] Posted data.
[11:03:09] Initial: 0000; - Uploaded at ~177 kB/s
[11:03:09] - Averaged speed for that direction ~173 kB/s
[11:03:09] + Results successfully sent
[11:03:09] Thank you for your contribution to Folding@Home.
[11:03:09] + Number of Units Completed: 203

[11:03:13] + Sent 1 of 1 completed units to the server
[11:03:13] + Closed connections

[kasson]

To all of those posting logs:
unfortunately a log will not help in this case. If you have the completed work unit data and can upload, the server should happily receive that. If not, our apologies. There is unfortunately a client-server communication bug where the server acknowledges the return before it is completely recorded. In this case, the server was choking on something in the 2682 returns for a 16-hour period before we fixed it. So none of the returns in question were recorded by the server.

[Dirtscience]

Just a record of another failure if it matters.

Code: Select all

Launch directory: C:\Users\crunch\FAH
Executable: fah6
Arguments: -send all 

[10:07:25] - Ask before connecting: No
[10:07:25] - User name: Dirtscience xxxx
[10:07:25] - User ID:xxxxxxxxxxxxxxxxxx
[10:07:25] - Machine ID: 16
[10:07:25] 
[10:07:25] Loaded queue successfully.
[10:07:25] Attempting to return result(s) to server...
[10:07:25] Project: 2682 (Run 4, Clone 25, Gen 18)
[10:07:25] - Read packet limit of 540015616... Set to 524286976.


[10:07:25] + Attempting to send results [August 11 10:07:25 UTC]
[10:24:07] + Results successfully sent
[10:24:07] Thank you for your contribution to Folding@Home.
[10:24:07] + Number of Units Completed: 12


Folding@Home Client Shutdown.

Thanks

[Grandpa_01]

Perhaps I don't know how to use the send all flag properly. I can not get the command prompt to accept the command. When I attempt to change the flags I get a windows prompt saying fah6 has quit working properly. The flags I am using are -smp -send 9. Can anybody tell me what I am doing wrong.

[sortofageek]

Try a shortcut using only the -send all flag.

[Grandpa_01]

That did not work either got the same windows prompt screne and the log is below.

Code: Select all

[00:49:45] Completed 107500 out of 250000 steps  (43%)
[00:49:55] Service stop request received.
[00:49:55] ***** Got a SIGTERM signal (2)
[00:49:55] Killing all core threads
[00:49:55] Could not get process id information.  Please kill core process manually

Folding@Home Client Shutdown.

[PantherX]

Have you tried only -send all flag? Your first FAHlog looks fine however, the second one is strange:
[00:49:45] Completed 107500 out of 250000 steps (43%)
If you used the -send all flag, it shouldn't be processing the WU.
My guess that it won't work is because the wuresult_xx has already been submitted and thus was deleted by F@H. I did mention it to another user(link).

[statesidecoma]

To all of those posting logs:
unfortunately a log will not help in this case. If you have the completed work unit data and can upload, the server should happily receive that. If not, our apologies. There is unfortunately a client-server communication bug where the server acknowledges the return before it is completely recorded. In this case, the server was choking on something in the 2682 returns for a 16-hour period before we fixed it. So none of the returns in question were recorded by the server.

Well that's just awesome. I hope to get more of those.

[Grandpa_01]

Have you tried only -send all flag? Your first FAHlog looks fine however, the second one is strange:
[00:49:45] Completed 107500 out of 250000 steps (43%)
If you used the -send all flag, it shouldn't be processing the WU.
My guess that it won't work is because the wuresult_xx has already been submitted and thus was deleted by F@H. I did mention it to another user(link).

I think you may be correct I can not find it anywhere.

[bruce]

[17:08:16] - User name: statesidecoma (Team 75255)
[17:08:16] - User ID: 54ECE633CFFCFC1
[17:08:16] - Machine ID: 3
[17:08:16]
[17:08:16] Loaded queue successfully.
[17:08:16] - Preparing to get new work unit...
. . .
[23:21:35] Project: 2682 (Run 6, Clone 6, Gen 18)
[23:21:35] + Attempting to send results [August 10 23:21:35 UTC]
[23:23:24] - Couldn't send HTTP request to server
[23:23:24] + Could not connect to Work Server (results)
[23:23:24] (171.67.108.22:8080)
[23:23:24] + Retrying using alternative port
[23:24:33] Completed 27500 out of 250000 steps (11%)
[23:42:55] + Results successfully sent
[23:42:55] Thank you for your contribution to Folding@Home.
[23:42:55] + Number of Units Completed: 39

Interesting. there is no record of that WU being received. Moreover, the last WU received from that particular client was a couple days earlier.

Hi statesidecoma (team 75255),
Your WU (P10502 R450 C0 G178) was added to the stats database on 2010-08-01 07:06:51 for 587 points of credit.

Are you moving WUs from one machine or client to another or changing MachineID?

Is is possible that the WU expired?

[statesidecoma]

[17:08:16] - User name: statesidecoma (Team 75255)
[17:08:16] - User ID: 54ECE633CFFCFC1
[17:08:16] - Machine ID: 3
[17:08:16]
[17:08:16] Loaded queue successfully.
[17:08:16] - Preparing to get new work unit...
. . .
[23:21:35] Project: 2682 (Run 6, Clone 6, Gen 18)
[23:21:35] + Attempting to send results [August 10 23:21:35 UTC]
[23:23:24] - Couldn't send HTTP request to server
[23:23:24] + Could not connect to Work Server (results)
[23:23:24] (171.67.108.22:8080)
[23:23:24] + Retrying using alternative port
[23:24:33] Completed 27500 out of 250000 steps (11%)
[23:42:55] + Results successfully sent
[23:42:55] Thank you for your contribution to Folding@Home.
[23:42:55] + Number of Units Completed: 39

Interesting. there is no record of that WU being received. Moreover, the last WU received from that particular client was a couple days earlier.

Hi statesidecoma (team 75255),
Your WU (P10502 R450 C0 G178) was added to the stats database on 2010-08-01 07:06:51 for 587 points of credit.

Are you moving WUs from one machine or client to another or changing MachineID?

Is is possible that the WU expired?

No moving form one machine to another. NO CHANGING ANYTHING. WU couldn't have expired, I just received it 2 days ago. I guess that just isn't gonna get credit.

[PantherX]

WU couldn't have expired, I just received it 2 days ago.

bigadv:
Preferred Deadline: 4 days
Maximum Deadline: 6 days