Repeated problems with projects 6501-6503

[Hammerhead]

I've been getting a lot of these. Sample output:

Code: Select all

[14:42:28] Completed 127500 out of 250000 steps  (51%)
[14:42:47] CoreStatus = 0 (0)
[14:42:47] Client-core communications error: ERROR 0x0
[14:42:47] Deleting current work unit & continuing...
[14:43:04] Trying to send all finished work units
[14:43:04] + No unsent completed units remaining.
[14:43:04] - Preparing to get new work unit...
[14:43:04] + Attempting to get work packet
[14:43:04] - Will indicate memory of 15 MB

Recent WUs that failed are:
Project: 6502 (Run 11, Clone 368, Gen 0)
Project: 6503 (Run 9, Clone 111, Gen 5)
Project: 6502 (Run 5, Clone 574, Gen 0)
Project: 6501 (Run 10, Clone 122, Gen 6)
Project: 6502 (Run 11, Clone 674, Gen 0)
Project: 6502 (Run 17, Clone 983, Gen 0)
Project: 6503 (Run 13, Clone 732, Gen 5)
Project: 6502 (Run 19, Clone 107, Gen 0)
Project: 6502 (Run 5, Clone 367, Gen 0)

Linux client 6.02 on Red Hat V5.5

This has been happening on more than one of my systems so I'm pretty sure it's not a hardware problem. The annoying part is that the same WU downloads again. I tried deleting the work directory but doesn't help. I have to reregister in order to download a different WU.

[John_Weatherman]

Have you only got 15 MB Ram?! That might be the problem see Wiki

[Hammerhead]

No. These systems has GBs are RAM.

[P5-133XL]

The machines may have GB's but did you configure the client to limit it to 15MB? If so, the solution is to reconfigure to allow more RAM usage.

[Hammerhead]

No I didn't reconfigure the RAM usage.

[John_Weatherman]

I would suggest stopping the client and run config or configonly - see the Wiki

[Hammerhead]

Thanks for the help. It was set to 15MBs. I changed it and it seems to be working OK now.