171.67.108.22 Could not connect to Work Server
Moderators: Site Moderators, FAHC Science Team
Re: 171.67.108.22 Could not connect to Work Server
I'm doing a P6051 on that rig just to pass the time...
Folding rig:Supermicro X9DRD-7LN4F-JBOD | (2) Xeon E5-2670 | 128GB DDR3 ECC Registered
Install Folding@Home on Linux without Python dependancy issues
Install Folding@Home on Linux without Python dependancy issues
Re: 171.67.108.22 Could not connect to Work Server
Got a 2681 on second machine.
First machine still no go.
Will just leave it to retry.
First machine still no go.
Will just leave it to retry.
Folding Tools:8 X PS3's, 5 x GTX280,1 x 8800GS, 8 x 9800GX2 GPU's
Re: 171.67.108.22 Could not connect to Work Server
Having the same issue.
Code: Select all
[19:44:35] Completed 250001 out of 250001 steps (100%)
[19:44:44] DynamicWrapper: Finished Work Unit: sleep=10000
[19:44:54]
[19:44:54] Finished Work Unit:
[19:44:54] - Reading up to 52544928 from "work/wudata_01.trr": Read 52544928
[19:44:54] trr file hash check passed.
[19:44:54] - Reading up to 41982888 from "work/wudata_01.xtc": Read 41982888
[19:44:55] xtc file hash check passed.
[19:44:55] edr file hash check passed.
[19:44:55] logfile size: 206948
[19:44:55] Leaving Run
[19:44:58] - Writing 94900072 bytes of core data to disk...
[19:45:02] ... Done.
[19:45:18] - Shutting down core
[19:45:18]
[19:45:18] Folding@home Core Shutdown: FINISHED_UNIT
[19:48:15] CoreStatus = 64 (100)
[19:48:15] Unit 1 finished with 59 percent of time to deadline remaining.
[19:48:15] Updated performance fraction: 0.593517
[19:48:15] Sending work to server
[19:48:15] Project: 2683 (Run 2, Clone 0, Gen 68)
[19:48:15] + Attempting to send results [April 19 19:48:15 UTC]
[19:48:15] - Reading file work/wuresults_01.dat from core
[19:48:16] (Read 94900072 bytes from disk)
[19:48:16] Connecting to http://171.67.108.22:8080/
[19:49:41] Posted data.
[19:49:41] Initial: 0000; - Uploaded at ~215 kB/s
[19:55:27] - Averaged speed for that direction ~410 kB/s
[19:55:27] + Results successfully sent
[19:55:27] Thank you for your contribution to Folding@Home.
[19:55:27] + Number of Units Completed: 60
[19:55:30] - Warning: Could not delete all work unit files (1): Core file absent
[19:55:30] Trying to send all finished work units
[19:55:30] + No unsent completed units remaining.
[19:55:30] - Preparing to get new work unit...
[19:55:30] Cleaning up work directory
[19:55:32] + Attempting to get work packet
[19:55:32] Passkey found
[19:55:32] - Will indicate memory of 7896 MB
[19:55:32] - Connecting to assignment server
[19:55:32] Connecting to http://assign.stanford.edu:8080/
[19:55:32] Posted data.
[19:55:32] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[19:55:32] + News From Folding@Home: Welcome to Folding@Home
[19:55:32] Loaded queue successfully.
[19:55:32] Connecting to http://171.67.108.22:8080/
[19:55:33] Posted data.
[19:55:33] Initial: 0000; + Could not connect to Work Server
[19:55:33] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[19:55:41] + Attempting to get work packet
[19:55:41] Passkey found
[19:55:41] - Will indicate memory of 7896 MB
[19:55:41] - Connecting to assignment server
[19:55:41] Connecting to http://assign.stanford.edu:8080/
[19:55:42] Posted data.
[19:55:42] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[19:55:42] + News From Folding@Home: Welcome to Folding@Home
[19:55:42] Loaded queue successfully.
[19:55:42] Connecting to http://171.67.108.22:8080/
[19:55:42] Posted data.
[19:55:42] Initial: 0000; + Could not connect to Work Server
[19:55:42] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[19:56:02] + Attempting to get work packet
[19:56:02] Passkey found
[19:56:02] - Will indicate memory of 7896 MB
[19:56:02] - Connecting to assignment server
[19:56:02] Connecting to http://assign.stanford.edu:8080/
[19:56:03] Posted data.
[19:56:03] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[19:56:03] + News From Folding@Home: Welcome to Folding@Home
[19:56:03] Loaded queue successfully.
[19:56:03] Connecting to http://171.67.108.22:8080/
[19:56:03] Posted data.
[19:56:03] Initial: 0000; + Could not connect to Work Server
[19:56:03] - Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[19:56:26] + Attempting to get work packet
[19:56:26] Passkey found
[19:56:26] - Will indicate memory of 7896 MB
[19:56:26] - Connecting to assignment server
[19:56:26] Connecting to http://assign.stanford.edu:8080/
[19:56:26] Posted data.
[19:56:26] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[19:56:26] + News From Folding@Home: Welcome to Folding@Home
[19:56:26] Loaded queue successfully.
[19:56:26] Connecting to http://171.67.108.22:8080/
[19:56:26] Posted data.
[19:56:27] Initial: 0000; + Could not connect to Work Server
[19:56:27] - Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[19:57:08] + Attempting to get work packet
[19:57:08] Passkey found
[19:57:08] - Will indicate memory of 7896 MB
[19:57:08] - Connecting to assignment server
[19:57:08] Connecting to http://assign.stanford.edu:8080/
[19:57:09] Posted data.
[19:57:09] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[19:57:09] + News From Folding@Home: Welcome to Folding@Home
[19:57:09] Loaded queue successfully.
[19:57:09] Connecting to http://171.67.108.22:8080/
[19:57:09] Posted data.
[19:57:09] Initial: 0000; + Could not connect to Work Server
[19:57:09] - Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
Re: 171.67.108.22 Could not connect to Work Server
Well over an hour and half now and still no work. "Unable to connect to the server".
Could someone just change the assignment server so that the machines get A3's without us having to change all of our parameters and nursemaid the clients at completion?
Could someone just change the assignment server so that the machines get A3's without us having to change all of our parameters and nursemaid the clients at completion?
Re: 171.67.108.22 Could not connect to Work Server
Tried removing the -bigadv parameter so I could at least get the machine working but even that fails. What is going on in Stanford??
Re: 171.67.108.22 Could not connect to Work Server
Finally got a 2683! Very frustrating.
Re: 171.67.108.22 Could not connect to Work Server
Just got a P2683, after finishing up the last A3; took multiple attempts though.
Folding rig:Supermicro X9DRD-7LN4F-JBOD | (2) Xeon E5-2670 | 128GB DDR3 ECC Registered
Install Folding@Home on Linux without Python dependancy issues
Install Folding@Home on Linux without Python dependancy issues
-
- Posts: 79
- Joined: Sun Mar 21, 2010 8:52 pm
- Hardware configuration: Core i7 3930K(C2)@4,2 (1.30v)
Swiftech Apogee Drive II + MCR-H220 Radiator
Asus P9X79
4*4Gb SEC 1600@1866 1.5v
GeForce GTX780ti ref (nztx G10+zalman lq315)
Creative X-Fi Titanium Fatal1ty
Lite-On iHAS124-34
HDD- WD3000GLFS + 2*Hitaсhi HDS723030BLE640 + 2*HDT721010SLA360
case-Corsair Obsidian 700D
PSU - Seasonic Platinum 860W (SS-860XP2)
2) Xeon E5645@4Ghz (1,34v)
ASUS P6T
Thermalright Silver Arrow
Corsair TR3X6G1600C7 (3x2048Mb, 7-7-7-20 1,62v)
GeForce GTX780 ref (nztx G10+corsair H75)
Zotac GTX980 AMP! Edition (ZT-90204-10P)
Hitachi 320Gb HTS543232A7A384
case - Chieftec LBX-03B Dremel edition :-)
PSU - Zalman ZM-850HP+ (Enhance silver)
APC SUA1500RMI2U
APC SUA1500RMI2U
Re: 171.67.108.22 Could not connect to Work Server
Code: Select all
[20:44:51] + Attempting to send results [April 20 20:44:51 UTC]
[20:44:51] - Reading file work/wuresults_04.dat from core
[20:44:56] (Read 100110316 bytes from disk)
[20:44:56] Connecting to http://171.67.108.22:8080/
[21:14:59] - Couldn't send HTTP request to server
[21:14:59] + Could not connect to Work Server (results)
[21:14:59] (171.67.108.22:8080)
[21:14:59] + Retrying using alternative port
[21:14:59] Connecting to http://171.67.108.22:80/
[21:15:20] - Couldn't send HTTP request to server
[21:15:20] + Could not connect to Work Server (results)
[21:15:20] (171.67.108.22:80)
[21:15:20] - Error: Could not transmit unit 04 (completed April 20) to work server.
[21:15:20] - 1 failed uploads of this unit.
[21:15:20] Keeping unit 04 in queue.
[21:15:20] Trying to send all finished work units
[21:15:20] Project: 2681 (Run 14, Clone 18, Gen 51)
[21:15:20] + Attempting to send results [April 20 21:15:20 UTC]
[21:15:20] - Reading file work/wuresults_04.dat from core
[21:15:20] (Read 100110316 bytes from disk)
[21:15:20] Connecting to http://171.67.108.22:8080/
[21:41:49] - Couldn't send HTTP request to server
[21:41:49] + Could not connect to Work Server (results)
[21:41:49] (171.67.108.22:8080)
[21:41:49] + Retrying using alternative port
[21:41:49] Connecting to http://171.67.108.22:80/
[21:42:10] - Couldn't send HTTP request to server
[21:42:10] + Could not connect to Work Server (results)
[21:42:10] (171.67.108.22:80)
[21:42:10] - Error: Could not transmit unit 04 (completed April 20) to work server.
[21:42:10] - 2 failed uploads of this unit.
[21:42:10] + Attempting to send results [April 20 21:42:10 UTC]
[21:42:10] - Reading file work/wuresults_04.dat from core
[21:42:10] (Read 100110316 bytes from disk)
[21:42:10] Connecting to http://171.67.108.25:8080/
[22:45:18] - Couldn't send HTTP request to server
[22:45:18] + Could not connect to Work Server (results)
[22:45:18] (171.67.108.25:8080)
[22:45:18] + Retrying using alternative port
[22:45:18] Connecting to http://171.67.108.25:80/
[23:17:08] - Couldn't send HTTP request to server
[23:17:08] + Could not connect to Work Server (results)
[23:17:08] (171.67.108.25:80)
[23:17:08] Could not transmit unit 04 to Collection server; keeping in queue.
[23:17:08] + Sent 0 of 1 completed units to the server
[23:17:08] - Preparing to get new work unit...
[23:17:08] Cleaning up work directory
[23:18:12] + Attempting to get work packet
[23:18:12] Passkey found
[23:18:12] - Will indicate memory of 4555 MB
[23:18:12] - Connecting to assignment server
[23:18:12] Connecting to http://assign.stanford.edu:8080/
[23:18:17] Posted data.
[23:18:17] Initial: ED82; - Successful: assigned to (130.237.232.140).
[23:18:17] + News From Folding@Home: Welcome to Folding@Home
[23:18:17] Loaded queue successfully.
[23:18:17] Connecting to http://130.237.232.140:8080/
[23:18:18] Posted data.
[23:18:18] Initial: 0000; - Receiving payload (expected size: 1797260)
[23:18:25] - Downloaded at ~250 kB/s
[23:18:25] - Averaged speed for that direction ~210 kB/s
[23:18:25] + Received work.
[23:18:25] Trying to send all finished work units
[23:18:25] Project: 2681 (Run 14, Clone 18, Gen 51)
[23:18:25] + Attempting to send results [April 20 23:18:25 UTC]
[23:18:25] - Reading file work/wuresults_04.dat from core
[23:18:25] (Read 100110316 bytes from disk)
[23:18:25] Connecting to http://171.67.108.22:8080/
[23:52:42] - Couldn't send HTTP request to server
[23:52:42] + Could not connect to Work Server (results)
[23:52:42] (171.67.108.22:8080)
[23:52:42] + Retrying using alternative port
[23:52:42] Connecting to http://171.67.108.22:80/
[00:00:04] - Couldn't send HTTP request to server
[00:00:04] + Could not connect to Work Server (results)
[00:00:04] (171.67.108.22:80)
[00:00:04] - Error: Could not transmit unit 04 (completed April 20) to work server.
[00:00:04] - 3 failed uploads of this unit.
[00:00:04] + Attempting to send results [April 21 00:00:04 UTC]
[00:00:04] - Reading file work/wuresults_04.dat from core
[00:00:04] (Read 100110316 bytes from disk)
[00:00:04] Connecting to http://171.67.108.25:8080/
[00:00:25] - Couldn't send HTTP request to server
[00:00:25] + Could not connect to Work Server (results)
[00:00:25] (171.67.108.25:8080)
[00:00:25] + Retrying using alternative port
[00:00:25] Connecting to http://171.67.108.25:80/
[01:10:39] - Autosending finished units... [April 21 01:10:39 UTC]
[01:10:39] Trying to send all finished work units
[01:10:39] - Already sending work
[01:10:39] + Sent 0 of 1 completed units to the server
[01:10:39] - Autosend completed