171.67.108.11 In reject

Moderators: Site Moderators, FAHC Science Team

Tobit
Posts: 342
Joined: Thu Apr 17, 2008 2:35 pm
Location: Manchester, NH USA

Attn: vvoelz - 171.67.108.11 in Reject state

Post by Tobit »

Vince, 171.67.108.11 has been in Reject state for the past hour.
toTOW
Site Moderator
Posts: 6455
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: Attn: vvoelz - 171.67.108.11 in Reject state

Post by toTOW »

It's back :

Code: Select all

171.67.108.11	GPU	vsp07v	vvoelz	full	Accepting
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Zagen30
Posts: 823
Joined: Tue Mar 25, 2008 12:45 am
Hardware configuration: Core i7 3770K @3.5 GHz (not folding), 8 GB DDR3 @2133 MHz, 2xGTX 780 @1215 MHz, Windows 7 Pro 64-bit running 7.3.6 w/ 1xSMP, 2xGPU

4P E5-4650 @3.1 GHz, 64 GB DDR3 @1333MHz, Ubuntu Desktop 13.10 64-bit

Re: Attn: vvoelz - 171.67.108.11 in Reject state

Post by Zagen30 »

And now it's Rejecting again.
Image
toTOW
Site Moderator
Posts: 6455
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: Attn: vvoelz - 171.67.108.11 in Reject state

Post by toTOW »

And it's back again :mrgreen:
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Tobit
Posts: 342
Joined: Thu Apr 17, 2008 2:35 pm
Location: Manchester, NH USA

Re: Attn: vvoelz - 171.67.108.11 in Reject state

Post by Tobit »

108.11 is in Reject state again.. but wait... there is actually good news from this...

wait for it...

a collection server actually accepted the work on its behalf without complaining that it had no record of the work unit as the old CS servers used to almost always report. Thank you Pande, things are indeed improving. :)
derrickmcc
Posts: 221
Joined: Fri Jul 24, 2009 12:30 am
Hardware configuration: 2 x GTX 460 (825/1600/1650)
AMD Athlon II X2 250 3.0Ghz
Kingston 2Gb DDR2 1066 Mhz
MSI K9A2 Platinum
Western Digital 500Gb Sata II
LiteOn DVD
Coolermaster 900W UCP
Antec 902
Windows XP SP3
Location: Malvern, UK

Cannot connect to work server 171.67.108.11

Post by derrickmcc »

Getting error: Cannot connect to work server

Not getting WU

Code: Select all

[18:34:06] - Preparing to get new work unit...
[18:34:06] + Attempting to get work packet
[18:34:06] - Connecting to assignment server
[18:34:07] - Successful: assigned to (171.67.108.11).
[18:34:07] + News From Folding@Home: Welcome to Folding@Home
[18:34:07] Loaded queue successfully.
[18:34:09] - Couldn't send HTTP request to server
[18:34:09] + Could not connect to Work Server
[18:34:09] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[18:34:28] + Attempting to get work packet
[18:34:28] - Connecting to assignment server
[18:34:28] - Successful: assigned to (171.67.108.11).
[18:34:28] + News From Folding@Home: Welcome to Folding@Home
[18:34:29] Loaded queue successfully.
[18:34:30] - Couldn't send HTTP request to server
[18:34:30] + Could not connect to Work Server
[18:34:30] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[18:34:46] + Attempting to get work packet
[18:34:46] - Connecting to assignment server
[18:34:47] - Successful: assigned to (171.67.108.11).
[18:34:47] + News From Folding@Home: Welcome to Folding@Home
[18:34:47] Loaded queue successfully.
[18:34:49] - Couldn't send HTTP request to server
[18:34:49] + Could not connect to Work Server
[18:34:49] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[18:35:22] + Attempting to get work packet
[18:35:22] - Connecting to assignment server
[18:35:22] - Successful: assigned to (171.67.108.11).
[18:35:22] + News From Folding@Home: Welcome to Folding@Home
[18:35:23] Loaded queue successfully.
[18:35:24] - Couldn't send HTTP request to server
[18:35:24] + Could not connect to Work Server
[18:35:24] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.
[18:36:14] + Attempting to get work packet
[18:36:14] - Connecting to assignment server
[18:36:15] - Successful: assigned to (171.67.108.11).
[18:36:15] + News From Folding@Home: Welcome to Folding@Home
[18:36:15] Loaded queue successfully.
[18:36:17] - Couldn't send HTTP request to server
[18:36:17] + Could not connect to Work Server
[18:36:17] - Attempt #5  to get work failed, and no other work to do.
Waiting before retry.
[18:37:37] + Attempting to get work packet
[18:37:37] - Connecting to assignment server
[18:37:38] - Successful: assigned to (171.67.108.11).
[18:37:38] + News From Folding@Home: Welcome to Folding@Home
[18:37:38] Loaded queue successfully.
[18:37:40] - Couldn't send HTTP request to server
[18:37:40] + Could not connect to Work Server
[18:37:40] - Attempt #6  to get work failed, and no other work to do.
Waiting before retry.
Image
Image
bruce
Posts: 20822
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Cannot connect to work server 171.67.108.11

Post by bruce »

Yes, that server needs help. There are several other servers which can supply you with a new assignment, but it often takes as much as ten minutes for the assignment server to reconfigure itself and redirect you elsewhere.
ikerekes
Posts: 94
Joined: Thu Nov 13, 2008 4:18 pm
Hardware configuration: q6600 @ 3.3Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Athlon x2 6000+ @ 3.0Ghz ubuntu 8.04 smp + asus 9600GSO gpu2 in wine wrapper
5600X2 @ 3.19Ghz ubuntu 8.04 smp + asus 9600GSO gpu2 in wine wrapper
E5200 @ 3.7Ghz ubuntu 8.04 smp2 + asus 9600GT silent gpu2 in wine wrapper
E5200 @ 3.65Ghz ubuntu 8.04 smp2 + asus 9600GSO gpu2 in wine wrapper
E6550 vmware ubuntu 8.4.1
q8400 @ 3.3Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Athlon II 620 @ 2.6 Ghz windows xp-sp3 one SMP2 (2.15 core) + 1 9800GT native GPU2
Location: Calgary, Canada

Re: Cannot connect to work server 171.67.108.11

Post by ikerekes »

bruce wrote:Yes, that server needs help. There are several other servers which can supply you with a new assignment, but it often takes as much as ten minutes for the assignment server to reconfigure itself and redirect you elsewhere.
Yes it definitely needs help.

Code: Select all

Index 8: ready for upload 353.00 pts (144.656 pt/hr, 3471.74 ppd) 29.5 X min speed
  server: 171.67.108.11:8080; project: 5768
  Folding: run 13, clone 227, generation 1519; benchmark 0; misc: 500, 200, 11 (le)
  issue: Wed Mar  3 10:16:08 2010; begin: Wed Mar  3 10:16:08 2010
  end: Wed Mar  3 12:42:33 2010; due: Sat Mar  6 10:16:08 2010 (3 days)
Image
Teddy
Posts: 134
Joined: Tue Feb 12, 2008 3:05 am
Location: Canberra, Australia
Contact:

Re: Cannot connect to work server 171.67.108.11

Post by Teddy »

This server is now gone into reject, 4 work units cannot be returned.
Teddy
bruce
Posts: 20822
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Cannot connect to work server 171.67.108.11

Post by bruce »

Yes, it was in reject from 18:30:10 PST to 20:45:10 PST but has been functional since before 21:05:10 PST. Your post was at 20:01 PST.
RAH
Posts: 131
Joined: Sun Dec 02, 2007 6:29 am
Hardware configuration: 1. C2Q 8200@2880 / W7Pro64 / SMP2 / 2 GPU - GTS250/GTS450
2. C2D 6300@3600 / XPsp3 / SMP2 / 1 GPU - GT240
Location: Florida

Re: Cannot connect to work server 171.67.108.11

Post by RAH »

Yep. Back up again.
But they should take a good look at it.
Thats 3 or 4 days this week its borked.

Holding up science you know. :lol:
Image
Teddy
Posts: 134
Joined: Tue Feb 12, 2008 3:05 am
Location: Canberra, Australia
Contact:

Re: Cannot connect to work server 171.67.108.11

Post by Teddy »

Yep all my completed units magically uploaded themselves.
It seems quite often that the servers are playing silly buggers!

Teddy
noorman
Posts: 270
Joined: Sun Dec 02, 2007 2:26 pm
Hardware configuration: Folders: Intel C2D E6550 @ 3.150 GHz + GPU XFX 9800GTX+ @ 765 MHZ w. WinXP-GPU
AMD A2X64 3800+ @ stock + GPU XFX 9800GTX+ @ 775 MHZ w. WinXP-GPU
Main rig: an old Athlon Barton 2500+ @2.25 GHz & 2* 512 MB RAM Apacer, Radeon 9800Pro, WinXP SP3+
Location: Belgium, near the International Sea-Port of Antwerp

still problems w. 108.11 & 108.25 uploading results

Post by noorman »

.

Code: Select all

[03:46:05] Completed 13%
[03:47:08] - Autosending finished units... [March 27 03:47:08 UTC]
[03:47:08] Trying to send all finished work units
[03:47:08] Project: 5769 (Run 7, Clone 234, Gen 19)


[03:47:08] + Attempting to send results [March 27 03:47:08 UTC]



[03:30:45] Completed 100%
[03:30:45] Successful run
[03:30:45] DynamicWrapper: Finished Work Unit: sleep=10000
[03:30:55] Reserved 75900 bytes for xtc file; Cosm status=0
[03:30:55] Allocated 75900 bytes for xtc file
[03:30:55] - Reading up to 75900 from "work/wudata_08.xtc": Read 75900
[03:30:55] Read 75900 bytes from xtc file; available packet space=786354564
[03:30:55] xtc file hash check passed.
[03:30:55] Reserved 15168 15168 786354564 bytes for arc file=<work/wudata_08.trr> Cosm status=0
[03:30:55] Allocated 15168 bytes for arc file
[03:30:55] - Reading up to 15168 from "work/wudata_08.trr": Read 15168
[03:30:55] Read 15168 bytes from arc file; available packet space=786339396
[03:30:55] trr file hash check passed.
[03:30:55] Allocated 560 bytes for edr file
[03:30:55] Read bedfile
[03:30:55] edr file hash check passed.
[03:30:55] Allocated 33334 bytes for logfile
[03:30:55] Read logfile
[03:30:55] GuardedRun: success in DynamicWrapper
[03:30:55] GuardedRun: done
[03:30:55] Run: GuardedRun completed.
[03:30:57] + Opened results file
[03:30:57] - Writing 125474 bytes of core data to disk...
[03:30:57] Done: 124962 -> 99244 (compressed to 79.4 percent)
[03:30:57]   ... Done.
[03:30:57] DeleteFrameFiles: successfully deleted file=work/wudata_08.ckp
[03:30:57] Shutting down core 
[03:30:57] 
[03:30:57] Folding@home Core Shutdown: FINISHED_UNIT
[03:31:01] CoreStatus = 64 (100)
[03:31:01] Unit 8 finished with 98 percent of time to deadline remaining.
[03:31:01] Updated performance fraction: 0.977927
[03:31:01] Sending work to server
[03:31:01] Project: 5769 (Run 7, Clone 234, Gen 19)


[03:31:01] + Attempting to send results [March 27 03:31:01 UTC]
[03:31:01] - Reading file work/wuresults_08.dat from core
[03:31:01]   (Read 99756 bytes from disk)
[03:31:01] Connecting to http://171.67.108.11:8080/
[03:31:02] - Couldn't send HTTP request to server
[03:31:02] + Could not connect to Work Server (results)
[03:31:02]     (171.67.108.11:8080)
[03:31:02] + Retrying using alternative port
[03:31:02] Connecting to http://171.67.108.11:80/
[03:31:04] - Couldn't send HTTP request to server
[03:31:04] + Could not connect to Work Server (results)
[03:31:04]     (171.67.108.11:80)
[03:31:04] - Error: Could not transmit unit 08 (completed March 27) to work server.
[03:31:04] - 1 failed uploads of this unit.
[03:31:04]   Keeping unit 08 in queue.
[03:31:04] Trying to send all finished work units
[03:31:04] Project: 5769 (Run 7, Clone 234, Gen 19)


[03:31:04] + Attempting to send results [March 27 03:31:04 UTC]
[03:31:04] - Reading file work/wuresults_08.dat from core
[03:31:04]   (Read 99756 bytes from disk)
[03:31:04] Connecting to http://171.67.108.11:8080/
[03:31:05] - Couldn't send HTTP request to server
[03:31:05] + Could not connect to Work Server (results)
[03:31:05]     (171.67.108.11:8080)
[03:31:05] + Retrying using alternative port
[03:31:05] Connecting to http://171.67.108.11:80/
[03:31:06] - Couldn't send HTTP request to server
[03:31:06] + Could not connect to Work Server (results)
[03:31:06]     (171.67.108.11:80)
[03:31:06] - Error: Could not transmit unit 08 (completed March 27) to work server.
[03:31:06] - 2 failed uploads of this unit.


[03:31:06] + Attempting to send results [March 27 03:31:06 UTC]
[03:31:06] - Reading file work/wuresults_08.dat from core
[03:31:06]   (Read 99756 bytes from disk)
[03:31:06] Connecting to http://171.67.108.25:8080/
[03:31:07] - Couldn't send HTTP request to server
[03:31:07]   (Got status 503)
[03:31:07] + Could not connect to Work Server (results)
[03:31:07]     (171.67.108.25:8080)
[03:31:07] + Retrying using alternative port
[03:31:07] Connecting to http://171.67.108.25:80/
[03:31:07] - Couldn't send HTTP request to server
[03:31:07]   (Got status 503)
[03:31:07] + Could not connect to Work Server (results)
[03:31:07]     (171.67.108.25:80)
[03:31:07]   Could not transmit unit 08 to Collection server; keeping in queue.
[03:31:07] + Sent 0 of 1 completed units to the server
[03:31:07] - Preparing to get new work unit...
[03:31:07] + Attempting to get work packet
[03:31:07] - Will indicate memory of 2046 MB
[03:31:07] - Connecting to assignment server
[03:31:07] Connecting to http://assign-GPU.stanford.edu:8080/
[03:31:08] Posted data.
[03:31:08] Initial: 40AB; - Successful: assigned to (171.64.65.61).
[03:31:08] + News From Folding@Home: Welcome to Folding@Home
[03:31:08] Loaded queue successfully.
[03:31:08] Connecting to http://171.64.65.61:8080/
[03:31:09] Posted data.
[03:31:09] Initial: 0000; - Receiving payload (expected size: 74354)
[03:31:10] - Downloaded at ~72 kB/s
[03:31:10] - Averaged speed for that direction ~73 kB/s
[03:31:10] + Received work.
[03:31:10] Trying to send all finished work units
[03:31:10] Project: 5769 (Run 7, Clone 234, Gen 19)


[03:31:10] + Attempting to send results [March 27 03:31:10 UTC]
[03:31:10] - Reading file work/wuresults_08.dat from core
[03:31:10]   (Read 99756 bytes from disk)
[03:31:10] Connecting to http://171.67.108.11:8080/
[03:31:11] - Couldn't send HTTP request to server
[03:31:11] + Could not connect to Work Server (results)
[03:31:11]     (171.67.108.11:8080)
[03:31:11] + Retrying using alternative port
[03:31:11] Connecting to http://171.67.108.11:80/
[03:31:12] - Couldn't send HTTP request to server
[03:31:12] + Could not connect to Work Server (results)
[03:31:12]     (171.67.108.11:80)
[03:31:12] - Error: Could not transmit unit 08 (completed March 27) to work server.
[03:31:12] - 3 failed uploads of this unit.


[03:31:12] + Attempting to send results [March 27 03:31:12 UTC]
[03:31:12] - Reading file work/wuresults_08.dat from core
[03:31:12]   (Read 99756 bytes from disk)
[03:31:12] Connecting to http://171.67.108.25:8080/
[03:31:13] - Couldn't send HTTP request to server
[03:31:13]   (Got status 503)
[03:31:13] + Could not connect to Work Server (results)
[03:31:13]     (171.67.108.25:8080)
[03:31:13] + Retrying using alternative port
[03:31:13] Connecting to http://171.67.108.25:80/
[03:31:13] - Couldn't send HTTP request to server
[03:31:13]   (Got status 503)
[03:31:13] + Could not connect to Work Server (results)
[03:31:13]     (171.67.108.25:80)
[03:31:13]   Could not transmit unit 08 to Collection server; keeping in queue.
[03:31:13] + Sent 0 of 1 completed units to the server
[03:31:13] + Closed connections
[03:31:13] 
[03:31:13] + Processing work unit
[03:31:13] Core required: FahCore_11.exe
[03:31:13] Core found.
[03:31:13] Working on queue slot 09 [March 27 03:31:13 UTC]
[03:31:13] + Working ...
[03:31:13] - Calling '.\FahCore_11.exe -dir work/ -suffix 09 -checkpoint 15 -verbose -lifeline 336 -version 623'

[03:31:13] 
[03:31:13] *------------------------------*
[03:31:13] Folding@Home GPU Core
[03:31:13] Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
[03:31:13] 
[03:31:13] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[03:31:13] Build host: amoeba
[03:31:13] Board Type: Nvidia
[03:31:13] Core      : 
[03:31:13] Preparing to commence simulation
[03:31:13] - Looking at optimizations...
[03:31:13] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp
[03:31:13] - Created dyn
[03:31:13] - Files status OK
[03:31:13] - Expanded 73842 -> 383588 (decompressed 519.4 percent)
[03:31:13] Called DecompressByteArray: compressed_data_size=73842 data_size=383588, decompressed_data_size=383588 diff=0
[03:31:13] - Digital signature verified
[03:31:13] 
[03:31:13] Project: 6601 (Run 5, Clone 974, Gen 10)
[03:31:13] 
[03:31:13] Assembly optimizations on if available.
[03:31:13] Entering M.D.
[03:31:19] Tpr hash work/wudata_09.tpr:  4094645624 2839369609 464250670 2045228217 1360651055
[03:31:19] 
[03:31:19] Calling fah_main args: 14 usage=100
[03:31:19] 
[03:31:20] Working on Protein
[03:31:21] Client config found, loading data.
[03:31:21] Starting GUI Server
[03:32:29] Completed 1%
[03:33:37] Completed 2%
[03:34:45] Completed 3%
[03:35:53] Completed 4%
[03:37:01] Completed 5%
[03:38:09] Completed 6%
[03:39:17] Completed 7%
[03:40:25] Completed 8%
[03:41:33] Completed 9%
[03:42:41] Completed 10%
[03:43:49] Completed 11%
[03:44:57] Completed 12%
[03:47:08] - Reading file work/wuresults_08.dat from core
[03:47:08]   (Read 99756 bytes from disk)
[03:47:08] Connecting to http://171.67.108.11:8080/
[03:47:10] - Couldn't send HTTP request to server
[03:47:10] + Could not connect to Work Server (results)
[03:47:10]     (171.67.108.11:8080)
[03:47:10] + Retrying using alternative port
[03:47:10] Connecting to http://171.67.108.11:80/
[03:47:11] - Couldn't send HTTP request to server
[03:47:11] + Could not connect to Work Server (results)
[03:47:11]     (171.67.108.11:80)
[03:47:11] - Error: Could not transmit unit 08 (completed March 27) to work server.
[03:47:11] - 4 failed uploads of this unit.


[03:47:11] + Attempting to send results [March 27 03:47:11 UTC]
[03:47:11] - Reading file work/wuresults_08.dat from core
[03:47:11]   (Read 99756 bytes from disk)
[03:47:11] Connecting to http://171.67.108.25:8080/
[03:47:11] - Couldn't send HTTP request to server
[03:47:11]   (Got status 503)
[03:47:11] + Could not connect to Work Server (results)
[03:47:11]     (171.67.108.25:8080)
[03:47:11] + Retrying using alternative port
[03:47:11] Connecting to http://171.67.108.25:80/
[03:47:12] - Couldn't send HTTP request to server
[03:47:12]   (Got status 503)
[03:47:12] + Could not connect to Work Server (results)
[03:47:12]     (171.67.108.25:80)
[03:47:12]   Could not transmit unit 08 to Collection server; keeping in queue.
[03:47:12] + Sent 0 of 1 completed units to the server
[03:47:12] - Autosend completed
[03:47:12] + Working...
[03:47:13] Completed 14%
.

ZERO output in the 6 am period (while rigs were running as normal) !
http://folding.extremeoverclocking.com/ ... =&u=104965

.
- stopped Linux SMP w. HT on i7-860@3.5 GHz
....................................
Folded since 10-06-04 till 09-2010
HaloJones
Posts: 906
Joined: Thu Jul 24, 2008 10:16 am

Re: still problems w. 108.11 & 108.25 uploading results

Post by HaloJones »

These two are conspiring against us again.
single 1070

Image
bruce
Posts: 20822
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: still problems w. 108.11 & 108.25 uploading results

Post by bruce »

HaloJones wrote:These two are conspiring against us again.
The Work Server 171.67.108.11 was working until 11:00:10 PDT (2.3 hrs ago) but is no longer accepting connections. I'm not sure what the problem is or how soon it will be fixed.

The collection server 171.67.108.25 is quite busy but appears to be functioning normally but you're going to need to be patient.
Post Reply