Project 6318, two WU's completed, only seeing credit for one

Moderators: Site Moderators, FAHC Science Team

Post Reply
BABackman
Posts: 8
Joined: Wed Dec 17, 2008 2:41 am

Project 6318, two WU's completed, only seeing credit for one

Post by BABackman »

Hello.
I returned Project 6318 (Run 2880, Clone 90, Gen 0) and (Run 1710, Clone 89, Gen 0) on Feb 2, but only saw one work unit's points show up. Other threads have indicated problems with the associated server and possible recredits in the works, but I don't know if it has to be mentioned here to be found, so here it is.
From my notebook:

Code: Select all

[13:19:52] Finished Work Unit:
[13:19:52] - Reading up to 362448 from "work/wudata_06.arc": Read 362448
[13:19:52] - Reading up to 5802836 from "work/wudata_06.xtc": Read 5802836
[13:19:52] goefile size: 0
[13:19:52] Leaving Run
[13:19:52] - Writing 7757928 bytes of core data to disk...
[13:19:55] Done: 7757416 -> 6891177 (compressed to 88.8 percent)
[13:19:55]   ... Done.
[13:19:55] - Shutting down core
[13:19:55] 
[13:19:55] Folding@home Core Shutdown: FINISHED_UNIT
[13:19:59] CoreStatus = 64 (100)
[13:19:59] Sending work to server
[13:19:59] Project: 6318 (Run 1710, Clone 89, Gen 0)
[13:19:59] - Read packet limit of 540015616... Set to 524286976.

[13:19:59] + Attempting to send results [February 2 13:19:59 UTC]
[13:22:51] + Results successfully sent
[13:22:51] Thank you for your contribution to Folding@Home.
[13:22:51] + Number of Units Completed: 210

From My Desktop:

Code: Select all

[08:20:04] Finished Work Unit:
[08:20:04] - Reading up to 362448 from "work/wudata_09.arc": Read 362448
[08:20:04] - Reading up to 5810636 from "work/wudata_09.xtc": Read 5810636
[08:20:04] goefile size: 0
[08:20:04] Leaving Run
[08:20:06] - Writing 7767312 bytes of core data to disk...
[08:20:16] Done: 7766800 -> 6901506 (compressed to 88.8 percent)
[08:20:17]   ... Done.
[08:20:17] - Shutting down core
[08:20:17] 
[08:20:17] Folding@home Core Shutdown: FINISHED_UNIT
[08:20:21] CoreStatus = 64 (100)
[08:20:21] Sending work to server
[08:20:21] Project: 6318 (Run 2880, Clone 90, Gen 0)
[08:20:21] - Read packet limit of 540015616... Set to 524286976.

[08:20:21] + Attempting to send results [February 2 08:20:21 UTC]
[08:23:12] - Couldn't send HTTP request to server
[08:23:12] + Could not connect to Work Server (results)
[08:23:12]     (171.64.65.60:8080)
[08:23:12] + Retrying using alternative port
[08:23:13] - Couldn't send HTTP request to server
[08:23:13] + Could not connect to Work Server (results)
[08:23:13]     (171.64.65.60:80)
[08:23:13] - Error: Could not transmit unit 09 (completed February 2) to work server.
[08:23:13]   Keeping unit 09 in queue.
[08:23:13] Project: 6318 (Run 2880, Clone 90, Gen 0)
[08:23:13] - Read packet limit of 540015616... Set to 524286976.

[08:23:13] + Attempting to send results [February 2 08:23:13 UTC]
[08:26:04] - Couldn't send HTTP request to server
[08:26:04] + Could not connect to Work Server (results)
[08:26:04]     (171.64.65.60:8080)
[08:26:04] + Retrying using alternative port
[08:26:05] - Couldn't send HTTP request to server
[08:26:05] + Could not connect to Work Server (results)
[08:26:05]     (171.64.65.60:80)
[08:26:05] - Error: Could not transmit unit 09 (completed February 2) to work server.
[08:26:05] - Read packet limit of 540015616... Set to 524286976.

[08:26:05] + Attempting to send results [February 2 08:26:05 UTC]
[08:29:10] + Results successfully sent
[08:29:10] Thank you for your contribution to Folding@Home.
[08:29:10] + Number of Units Completed: 69

[08:29:10]   Successfully sent unit 09 to Collection server.
Bob8421
Posts: 53
Joined: Tue Dec 22, 2009 5:16 pm

Re: Project 6318, two WU's completed, only seeing credit for one

Post by Bob8421 »

It is the work unit that went to the collection server that was not credited.

I've got 11 project 6318 work units that went to the collection server and have never been credited. They've been reported (several times) in the "Project 6318: Collection server misconfigured?" thread. There has been absolutely no response to those posted problems from Pande Group and I have to assume that they just don't give a damn.

I've also got 4 project 24xx work units in the "Project: 2483 (Run 263, Clone 14, Gen 15) no credit" thread that have never been credited and they don't give a damn about those either.
PeterA
Posts: 59
Joined: Mon Dec 03, 2007 2:28 am
Hardware configuration: PC: AMD Sempron(tm) Processor 2800+, 1024 MB RAM, Microsoft Windows XP (Home Edition) SP3
Laptop: Mobile AMD Sempron(tm) Processor 3500+, 896 MB RAM, Microsoft Windows Vista (Home Premium)
Location: Blaine, MN

Re: Project 6318, two WU's completed, only seeing credit for one

Post by PeterA »

If it will make you feel better, I have been trying to up load a 6318 (r 2890,c 33, g 1) for about 2 weeks now. Never uploads. Working on a 2495 right now.
Nathan_P
Posts: 1164
Joined: Wed Apr 01, 2009 9:22 pm
Hardware configuration: Asus Z8NA D6C, 2 x5670@3.2 Ghz, , 12gb Ram, GTX 980ti, AX650 PSU, win 10 (daily use)

Asus Z87 WS, Xeon E3-1230L v3, 8gb ram, KFA GTX 1080, EVGA 750ti , AX760 PSU, Mint 18.2 OS

Not currently folding
Asus Z9PE- D8 WS, 2 E5-2665@2.3 Ghz, 16Gb 1.35v Ram, Ubuntu (Fold only)
Asus Z9PA, 2 Ivy 12 core, 16gb Ram, H folding appliance (fold only)
Location: Jersey, Channel islands

Re: Project 6318, two WU's completed, only seeing credit for one

Post by Nathan_P »

Bob8421 wrote:It is the work unit that went to the collection server that was not credited.

I've got 11 project 6318 work units that went to the collection server and have never been credited. They've been reported (several times) in the "Project 6318: Collection server misconfigured?" thread. There has been absolutely no response to those posted problems from Pande Group and I have to assume that they just don't give a damn.

I've also got 4 project 24xx work units in the "Project: 2483 (Run 263, Clone 14, Gen 15) no credit" thread that have never been credited and they don't give a damn about those either.
They do give a damn, i suspect that they are having a fair few problems with different servers at the moment and don't have time to post that they have problems are are working on them. As well as your issues, there seems to be major issues with some of the gpu servers and the main stanford site was taken down on thursday. Add in a new stats server, the new smp2 core the ongoing work on GPU3 and i imagine they are quite busy.
Image
Bob8421
Posts: 53
Joined: Tue Dec 22, 2009 5:16 pm

Re: Project 6318, two WU's completed, only seeing credit for one

Post by Bob8421 »

Yes, I realize that they have a number of problems to deal with, but those mostly seem to prevent data from moving back and forth properly. Once a work unit has been successfully downloaded to a client, successfully processed by that client, and successfully uploaded to a server, it wouldn't seem to be an impossible task to have that work processed in a timely manner.

Especially in the case of the 6318 work units, when multiple people tell you that the problem is the collection server, which does not appear to ever get processed, it shouldn't be all that difficult to finally process all the work units that went there to die.

In the thread about the 24xx work units, a few people have reported that some completed work units never showed up. This goes back a long time. Several times we were told that it would take "several days" to look into this and we should come back to the thread if the work units didn't show up by then. We did come back, reported that the work units never showed up, and were totally ignored. The problem was never fixed, even after several weeks (not days), and we were not even told that it never would be fixed.
BABackman
Posts: 8
Joined: Wed Dec 17, 2008 2:41 am

Re: Project 6318, two WU's completed, only seeing credit for one

Post by BABackman »

It looks like my missing unit found its way home. The stats say I finished 3 units yesterday, and I know I only finished 2.
Thanks, Pande group!
Post Reply