From the server stats, 171.67.108.21 is showing high net load and port 80 as being down. I can connect on port 8080 with my browser but it is not assigning work from this server/port. Port 80 is down, cannot connect with browser. I can connect to the assignment server so assuming no problem on my end.
[14:47:03] + Attempting to get work packet
[14:47:03] - Will indicate memory of 4094 MB
[14:47:03] - Connecting to assignment server
[14:47:03] Connecting to http://assign-GPU.stanford.edu:8080/
[14:47:04] Posted data.
[14:47:04] Initial: 43AB; - Successful: assigned to (171.67.108.21).
[14:47:04] + News From Folding@Home: Welcome to Folding@Home
[14:47:04] Loaded queue successfully.
[14:47:04] Connecting to http://171.67.108.21:8080/
[14:47:04] - Couldn't send HTTP request to server
[14:47:04] + Could not connect to Work Server
[14:47:04] - Attempt #8 to get work failed, and no other work to do.
Waiting before retry.
Last edited by Tobit on Fri Dec 25, 2009 2:51 pm, edited 1 time in total.
[15:01:08] - Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[15:01:29] + Attempting to get work packet
[15:01:29] - Will indicate memory of 2048 MB
[15:01:29] - Connecting to assignment server
[15:01:29] Connecting to http://assign-GPU.stanford.edu:8080/
[15:01:30] Posted data.
[15:01:30] Initial: 43AB; - Successful: assigned to (171.67.108.21).
[15:01:30] + News From Folding@Home: Welcome to Folding@Home
[15:01:30] Loaded queue successfully.
[15:01:30] Connecting to http://171.67.108.21:8080/
[15:01:30] - Couldn't send HTTP request to server
[15:01:30] + Could not connect to Work Server
[15:01:30] - Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[15:02:16] + Attempting to get work packet
[15:02:16] - Will indicate memory of 2048 MB
[15:02:16] - Connecting to assignment server
[15:02:16] Connecting to http://assign-GPU.stanford.edu:8080/
[15:02:17] Posted data.
[15:02:17] Initial: 43AB; - Successful: assigned to (171.67.108.21).
[15:02:17] + News From Folding@Home: Welcome to Folding@Home
[15:02:17] Loaded queue successfully.
[15:02:17] Connecting to http://171.67.108.21:8080/
[15:02:17] - Couldn't send HTTP request to server
[15:02:17] + Could not connect to Work Server
[15:02:17] - Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
Yeah I've got 6 idle GPU's right now. I think there's some sort of server reset operation after a few hours. Hope so because its the worst possible day for the servers to have problems.
Same with me. I can see that my clients (3 of them on two different machines) have all tried to connect to 171.67.108.21 or 171.64.122.70 and are all idle waiting for work. Most are stalled on attempt 9 or 10.
I hope this is just a GPU issue...I've got two bigadvs that also just finished (one at 100%, but looks to be processing, the other at 99%).
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Port 80 does not appear in the Assigned Port column, so how can port 80 be down for that server? I don't think it was ever on, was it? I'm not disagreeing with your conclusions, but I would like to know what you based them upon.
I just looked at the server status page, and netload for that server is 2 now, but I do see it was recently as high as 25. The situation may improving already...
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
7im wrote:The question was about port 80, and what lead you to believe it was down?
I see I phrased the first sentence of my report incorrectly. As always, I try to connect to both ports with my browser as outlined in the sticky. I could not connect to port 80 but could connect to port 8080. This lead me to believe that port 80 was down and I reported it as such. It is clear from my log that it was trying to connect to 8080 but failing. I never checked the server status to see which port(s) were assigned for work. When I saw the net-load was over 600 and yellow, that confirmed for me it was a load issue. I will do better next time master 7im.
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
I saw were the load was getting better, but thought I might have missed something about the ports. And since high loads and port issues are two different things, I just wanted see if you had seen something I had missed, and to make sure both got fixed if need be.