I'm not sure what to suggest. Perhaps you still have something blocking the upload -- perhaps your internet connection is less reliable that it should be --
During the past two hours, server 171.64.65.111 has accepted uploads of results from more than 1600 clients just like yours. Over the past several days, the recorded numbers have been similar to that without any discernible interruptions.
Although there's no logical reason why it should make any difference, but at this point I would probably try switching (temporarily?) from the systray client to the console client and see if it makes any difference.
You don't have to uninstall anything, but you will need to be sure that you never run both clients at the same time. Download the other windows client from the same download page. It's not an installer so don't run it. It should open a compressed directory (zip) containing Folding@home-Win32-x86.exe. Copy this file into the same place that you found FAHlog.txt. Create a shortcut from that file. In the properties of that shortcut, in the target field, add a space to the END of what is already there and then add: -send all. (Confirm that systray client is not running, and) run that shortcut and tell us what happened.
Cannot transmit to 171.64.65.111
Moderators: Site Moderators, FAHC Science Team
Re: 171.64.65.111
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
gwildperson
- Posts: 450
- Joined: Tue Dec 04, 2007 8:36 pm
Re: 171.64.65.111
I'm having a terrible time uploading to this server. I'm on dial-up so I expect my connection to be slow, but there's some other problem. My connection reports that it's connecting at 44 Kb but once the upload starts, Task Manager reports that I'm only using 10% of the available bandwidth. If I use the internet simultaneously, my speed jumps up an down approaching 100%.
I have not watched the uploads to the collection server, but they have failed several times, too. I have not changed anything on my connection and I was able to get better than 80% utilzation when uploading to other servers.
I have not watched the uploads to the collection server, but they have failed several times, too. I have not changed anything on my connection and I was able to get better than 80% utilzation when uploading to other servers.
-
Soumitra
- Posts: 7
- Joined: Tue Feb 10, 2009 10:33 pm
- Hardware configuration: Processor - Intel Core 2 Duo E6550 @ 2.33GHz
Ram - 2 x 1GB DDR2
Motherboard - XFX nVidia 650i Ultra
Graphics Card - nVidia GeForce GTX275 796 MB
HDD - Seagate Barracuda 500GB @ 7400rpm
OS - Windows Vista Home Premium - Location: India
Re: 171.64.65.111
hi all, i m also having problems with uploading to this server. I completed a WU on Aug 10, 2009 and it is still in queue to be sent. Here is the log file
As i was posting this the connection status of server changed to REJECT. Is that a problem, because my WU is in queue for last 3 days.
I have a similar issue with server 171.67.108.17, but i can understand that one as its netload is around 250. I currently have 2 WUs waiting to upload, one of them has failed 25 times and other failed 10 times.
I am not using any proxy and this problem is only with CPU systray client. GPU client is all fine except for today when a WU's upload failed 6 times.
I read other forums and threads but none helped.
Thanks in advance for any help, please solve this issue!!
Code: Select all
--- Opening Log file [August 12 15:54:58 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[15:54:58] - Ask before connecting: Yes
[15:54:58] - Proxy: localhost:8080
[15:54:58] - User name: Soumitra (Team 69411)
[15:54:58] - User ID: 517E45FD054303B8
[15:54:58] - Machine ID: 1
[15:54:58]
[15:54:58] Loaded queue successfully.
[15:54:58] Initialization complete
[15:54:58]
[15:54:58] + Processing work unit
[15:54:58] Project: 6303 (Run 59, Clone 4, Gen 13)
[15:54:58] - Read packet limit of 540015616... Set to 524286976.
[15:54:58] + Attempting to send results [August 12 15:54:58 UTC]
[15:54:58] Core required: FahCore_78.exe
[15:54:58] Core found.
[15:54:58] Working on queue slot 06 [August 12 15:54:58 UTC]
[15:54:58] + Working ...
[15:54:58] - Presenting message box asking to network.
[15:54:58]
[15:54:58] *------------------------------*
[15:54:58] Folding@Home Gromacs Core
[15:54:58] Version 1.90 (March 8, 2006)
[15:54:58]
[15:54:58] Preparing to commence simulation
[15:54:58] - Looking at optimizations...
[15:54:58] - Files status OK
[15:54:59] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[15:54:59]
[15:54:59] Project: 6301 (Run 151, Clone 8, Gen 4)
[15:54:59]
[15:54:59] Assembly optimizations on if available.
[15:54:59] Entering M.D.
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.64.65.111:8080)
[15:55:02] + Retrying using alternative port
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.64.65.111:80)
[15:55:02] - Error: Could not transmit unit 04 (completed August 10) to work server.
[15:55:02] - Read packet limit of 540015616... Set to 524286976.
[15:55:02] + Attempting to send results [August 12 15:55:02 UTC]
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.67.108.17:8080)
[15:55:02] + Retrying using alternative port
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.67.108.17:80)
[15:55:02] Could not transmit unit 04 to Collection server; keeping in queue.
[15:55:02] Project: 6303 (Run 379, Clone 7, Gen 3)
[15:55:02] + Attempting to send results [August 12 15:55:02 UTC]
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.64.65.111:8080)
[15:55:02] + Retrying using alternative port
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.64.65.111:80)
[15:55:02] - Error: Could not transmit unit 05 (completed August 12) to work server.
[15:55:02] + Attempting to send results [August 12 15:55:02 UTC]
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.67.108.17:8080)
[15:55:02] + Retrying using alternative port
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.67.108.17:80)
[15:55:02] Could not transmit unit 05 to Collection server; keeping in queue.
[15:55:19] (Starting from checkpoint)
[15:55:19] Protein: p6301_sh3_with_ALA_frags
[15:55:19]
[15:55:19] Writing local files
[15:55:19] Completed 22332 out of 500000 steps (4%)
[15:55:19] Extra SSE boost OK.
Folding@Home Client Shutdown.
--- Opening Log file [August 12 16:02:23 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[16:02:23] - Ask before connecting: No
[16:02:23] - User name: Soumitra (Team 69411)
[16:02:23] - User ID: 517E45FD054303B8
[16:02:23] - Machine ID: 1
[16:02:23]
[16:02:23] Loaded queue successfully.
[16:02:23] Initialization complete
[16:02:23]
[16:02:23] + Processing work unit
[16:02:23] Project: 6303 (Run 59, Clone 4, Gen 13)
[16:02:23] - Read packet limit of 540015616... Set to 524286976.
[16:02:23] + Attempting to send results [August 12 16:02:23 UTC]
[16:02:23] Core required: FahCore_78.exe
[16:02:23] Core found.
[16:02:23] Working on queue slot 06 [August 12 16:02:23 UTC]
[16:02:23] + Working ...
[16:02:23]
[16:02:23] *------------------------------*
[16:02:23] Folding@Home Gromacs Core
[16:02:23] Version 1.90 (March 8, 2006)
[16:02:23]
[16:02:23] Preparing to commence simulation
[16:02:23] - Looking at optimizations...
[16:02:23] - Files status OK
[16:02:24] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[16:02:24]
[16:02:24] Project: 6301 (Run 151, Clone 8, Gen 4)
[16:02:24]
[16:02:24] Assembly optimizations on if available.
[16:02:24] Entering M.D.
[16:02:44] (Starting from checkpoint)
[16:02:44] Protein: p6301_sh3_with_ALA_frags
[16:02:44]
[16:02:44] Writing local files
[16:02:44] Completed 22332 out of 500000 steps (4%)
[16:02:44] Extra SSE boost OK.
[16:07:54] - Couldn't send HTTP request to server
[16:07:54] + Could not connect to Work Server (results)
[16:07:54] (171.64.65.111:8080)
[16:07:54] + Retrying using alternative port
[16:09:11] Writing local files
[16:09:11] Completed 25000 out of 500000 steps (5%)
[16:15:26] - Couldn't send HTTP request to server
[16:15:26] + Could not connect to Work Server (results)
[16:15:26] (171.64.65.111:80)
[16:15:26] - Error: Could not transmit unit 04 (completed August 10) to work server.
[16:15:26] - Read packet limit of 540015616... Set to 524286976.
[16:15:26] + Attempting to send results [August 12 16:15:26 UTC]
[16:15:27] - Couldn't send HTTP request to server
[16:15:27] (Got status 503)
[16:15:27] + Could not connect to Work Server (results)
[16:15:27] (171.67.108.17:8080)
[16:15:27] + Retrying using alternative port
[16:15:27] - Couldn't send HTTP request to server
[16:15:27] (Got status 503)
[16:15:27] + Could not connect to Work Server (results)
[16:15:27] (171.67.108.17:80)
[16:15:27] Could not transmit unit 04 to Collection server; keeping in queue.
[16:15:27] Project: 6303 (Run 379, Clone 7, Gen 3)
[16:15:27] + Attempting to send results [August 12 16:15:27 UTC]
[16:19:14] - Couldn't send HTTP request to server
[16:19:14] + Could not connect to Work Server (results)
[16:19:14] (171.64.65.111:8080)
[16:19:14] + Retrying using alternative port
[16:20:57] Writing local files
[16:20:57] Completed 30000 out of 500000 steps (6%)
[16:21:54] - Couldn't send HTTP request to server
[16:21:54] + Could not connect to Work Server (results)
[16:21:54] (171.64.65.111:80)
[16:21:54] - Error: Could not transmit unit 05 (completed August 12) to work server.
[16:21:54] + Attempting to send results [August 12 16:21:54 UTC]
[16:21:54] - Couldn't send HTTP request to server
[16:21:54] (Got status 503)
[16:21:54] + Could not connect to Work Server (results)
[16:21:54] (171.67.108.17:8080)
[16:21:54] + Retrying using alternative port
[16:21:55] - Couldn't send HTTP request to server
[16:21:55] (Got status 503)
[16:21:55] + Could not connect to Work Server (results)
[16:21:55] (171.67.108.17:80)
[16:21:55] Could not transmit unit 05 to Collection server; keeping in queue.
[16:32:38] Writing local files
[16:32:38] Completed 35000 out of 500000 steps (7%)
[16:44:46] Writing local files
[16:44:46] Completed 40000 out of 500000 steps (8%)
[16:56:37] Writing local files
[16:56:37] Completed 45000 out of 500000 steps (9%)
[17:08:28] Writing local files
[17:08:28] Completed 50000 out of 500000 steps (10%)
[17:20:07] Writing local files
[17:20:07] Completed 55000 out of 500000 steps (11%)
[17:31:46] Writing local files
[17:31:46] Completed 60000 out of 500000 steps (12%)
[17:43:24] Writing local files
[17:43:24] Completed 65000 out of 500000 steps (13%)
[17:55:04] Writing local files
[17:55:04] Completed 70000 out of 500000 steps (14%)
[18:06:48] Writing local files
[18:06:48] Completed 75000 out of 500000 steps (15%)
[18:20:07] Writing local files
[18:20:07] Completed 80000 out of 500000 steps (16%)
[18:33:41] Writing local files
[18:33:41] Completed 85000 out of 500000 steps (17%)
[18:47:03] Writing local files
[18:47:03] Completed 90000 out of 500000 steps (18%)
[19:00:36] Writing local files
[19:00:36] Completed 95000 out of 500000 steps (19%)
Folding@Home Client Shutdown.
--- Opening Log file [August 12 19:18:08 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[19:18:08] - Ask before connecting: No
[19:18:08] - User name: Soumitra (Team 69411)
[19:18:08] - User ID: 517E45FD054303B8
[19:18:08] - Machine ID: 1
[19:18:08]
[19:18:08] Loaded queue successfully.
[19:18:08] Initialization complete
[19:18:08]
[19:18:08] + Processing work unit
[19:18:08] Core required: FahCore_78.exe
[19:18:08] Project: 6303 (Run 59, Clone 4, Gen 13)
[19:18:08] - Read packet limit of 540015616... Set to 524286976.
Core found.
[19:18:08] + Attempting to send results [August 12 19:18:08 UTC]
[19:18:08] Working on queue slot 06 [August 12 19:18:08 UTC]
[19:18:08] + Working ...
[19:18:08]
[19:18:08] *------------------------------*
[19:18:08] Folding@Home Gromacs Core
[19:18:08] Version 1.90 (March 8, 2006)
[19:18:08]
[19:18:08] Preparing to commence simulation
[19:18:08] - Looking at optimizations...
[19:18:08] - Files status OK
[19:18:09] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[19:18:10]
[19:18:10] Project: 6301 (Run 151, Clone 8, Gen 4)
[19:18:10]
[19:18:10] Assembly optimizations on if available.
[19:18:10] Entering M.D.
[19:18:12] - Couldn't send HTTP request to server
[19:18:12] + Could not connect to Work Server (results)
[19:18:12] (171.64.65.111:8080)
[19:18:12] + Retrying using alternative port
[19:18:31] (Starting from checkpoint)
[19:18:31] Protein: p6301_sh3_with_ALA_frags
[19:18:31]
[19:18:31] Writing local files
[19:18:31] Completed 97300 out of 500000 steps (19%)
[19:18:31] Extra SSE boost OK.
[19:19:43] - Couldn't send HTTP request to server
[19:19:43] + Could not connect to Work Server (results)
[19:19:43] (171.64.65.111:80)
[19:19:43] - Error: Could not transmit unit 04 (completed August 10) to work server.
[19:19:43] - Read packet limit of 540015616... Set to 524286976.
[19:19:43] + Attempting to send results [August 12 19:19:43 UTC]
[19:19:45] - Couldn't send HTTP request to server
[19:19:45] + Could not connect to Work Server (results)
[19:19:45] (171.67.108.17:8080)
[19:19:45] + Retrying using alternative port
[19:19:54] - Couldn't send HTTP request to server
[19:19:54] + Could not connect to Work Server (results)
[19:19:54] (171.67.108.17:80)
[19:19:54] Could not transmit unit 04 to Collection server; keeping in queue.
[19:19:54] Project: 6303 (Run 379, Clone 7, Gen 3)
[19:19:54] + Attempting to send results [August 12 19:19:54 UTC]
[19:20:03] - Couldn't send HTTP request to server
[19:20:03] + Could not connect to Work Server (results)
[19:20:03] (171.64.65.111:8080)
[19:20:03] + Retrying using alternative port
[19:20:11] - Couldn't send HTTP request to server
[19:20:11] + Could not connect to Work Server (results)
[19:20:11] (171.64.65.111:80)
[19:20:11] - Error: Could not transmit unit 05 (completed August 12) to work server.
[19:20:11] + Attempting to send results [August 12 19:20:11 UTC]
[19:20:12] - Couldn't send HTTP request to server
[19:20:12] + Could not connect to Work Server (results)
[19:20:12] (171.67.108.17:8080)
[19:20:12] + Retrying using alternative port
[19:20:21] - Couldn't send HTTP request to server
[19:20:21] + Could not connect to Work Server (results)
[19:20:21] (171.67.108.17:80)
[19:20:21] Could not transmit unit 05 to Collection server; keeping in queue.
[19:25:07] Writing local files
[19:25:07] Completed 100000 out of 500000 steps (20%)
[19:37:17] Writing local files
[19:37:18] Completed 105000 out of 500000 steps (21%)
[19:49:43] Writing local files
[19:49:43] Completed 110000 out of 500000 steps (22%)
[20:02:06] Writing local files
[20:02:06] Completed 115000 out of 500000 steps (23%)
[20:14:11] Writing local files
[20:14:11] Completed 120000 out of 500000 steps (24%)
[20:26:00] Writing local files
[20:26:00] Completed 125000 out of 500000 steps (25%)
[20:37:50] Writing local files
[20:37:50] Completed 130000 out of 500000 steps (26%)
[20:49:45] Writing local files
[20:49:45] Completed 135000 out of 500000 steps (27%)
[21:04:33] Writing local files
[21:04:34] Completed 140000 out of 500000 steps (28%)
[21:16:22] Writing local files
[21:16:22] Completed 145000 out of 500000 steps (29%)
[21:28:11] Writing local files
[21:28:11] Completed 150000 out of 500000 steps (30%)
[21:40:00] Writing local files
[21:40:00] Completed 155000 out of 500000 steps (31%)
[21:51:48] Writing local files
[21:51:49] Completed 160000 out of 500000 steps (32%)
[22:03:38] Writing local files
[22:03:38] Completed 165000 out of 500000 steps (33%)
[22:15:26] Writing local files
[22:15:26] Completed 170000 out of 500000 steps (34%)
[22:27:14] Writing local files
[22:27:14] Completed 175000 out of 500000 steps (35%)
[22:38:55] Writing local files
[22:38:55] Completed 180000 out of 500000 steps (36%)
Folding@Home Client Shutdown.
--- Opening Log file [August 12 22:47:22 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[22:47:22] - Ask before connecting: No
[22:47:22] - User name: Soumitra (Team 69411)
[22:47:22] - User ID: 517E45FD054303B8
[22:47:22] - Machine ID: 1
[22:47:22]
[22:47:23] Loaded queue successfully.
[22:47:23] Initialization complete
[22:47:23]
[22:47:23] + Processing work unit
[22:47:23] Core required: FahCore_78.exe
[22:47:23] Core found.
[22:47:23] Project: 6303 (Run 59, Clone 4, Gen 13)
[22:47:23] - Read packet limit of 540015616... Set to 524286976.
[22:47:23] + Attempting to send results [August 12 22:47:23 UTC]
[22:47:23] Working on queue slot 06 [August 12 22:47:23 UTC]
[22:47:23] + Working ...
[22:47:23]
[22:47:23] *------------------------------*
[22:47:23] Folding@Home Gromacs Core
[22:47:23] Version 1.90 (March 8, 2006)
[22:47:23]
[22:47:23] Preparing to commence simulation
[22:47:23] - Looking at optimizations...
[22:47:23] - Files status OK
[22:47:23] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[22:47:23]
[22:47:23] Project: 6301 (Run 151, Clone 8, Gen 4)
[22:47:23]
[22:47:23] Assembly optimizations on if available.
[22:47:23] Entering M.D.
[22:47:44] (Starting from checkpoint)
[22:47:44] Protein: p6301_sh3_with_ALA_frags
[22:47:44]
[22:47:44] Writing local files
[22:47:44] Completed 180000 out of 500000 steps (36%)
[22:47:44] Extra SSE boost OK.
[22:48:40] - Couldn't send HTTP request to server
[22:48:40] + Could not connect to Work Server (results)
[22:48:40] (171.64.65.111:8080)
[22:48:40] + Retrying using alternative port
[22:50:32] - Couldn't send HTTP request to server
[22:50:32] + Could not connect to Work Server (results)
[22:50:32] (171.64.65.111:80)
[22:50:32] - Error: Could not transmit unit 04 (completed August 10) to work server.
[22:50:32] - Read packet limit of 540015616... Set to 524286976.
[22:50:32] + Attempting to send results [August 12 22:50:32 UTC]
[22:50:33] - Couldn't send HTTP request to server
[22:50:33] + Could not connect to Work Server (results)
[22:50:33] (171.67.108.17:8080)
[22:50:33] + Retrying using alternative port
[22:50:42] - Couldn't send HTTP request to server
[22:50:42] + Could not connect to Work Server (results)
[22:50:42] (171.67.108.17:80)
[22:50:42] Could not transmit unit 04 to Collection server; keeping in queue.
[22:50:42] Project: 6303 (Run 379, Clone 7, Gen 3)
[22:50:42] + Attempting to send results [August 12 22:50:42 UTC]
[22:53:29] - Couldn't send HTTP request to server
[22:53:29] + Could not connect to Work Server (results)
[22:53:29] (171.64.65.111:8080)
[22:53:29] + Retrying using alternative port
[22:55:38] - Couldn't send HTTP request to server
[22:55:38] + Could not connect to Work Server (results)
[22:55:38] (171.64.65.111:80)
[22:55:38] - Error: Could not transmit unit 05 (completed August 12) to work server.
[22:55:38] + Attempting to send results [August 12 22:55:38 UTC]
[22:55:40] - Couldn't send HTTP request to server
[22:55:40] + Could not connect to Work Server (results)
[22:55:40] (171.67.108.17:8080)
[22:55:40] + Retrying using alternative port
[22:55:48] - Couldn't send HTTP request to server
[22:55:48] + Could not connect to Work Server (results)
[22:55:48] (171.67.108.17:80)
[22:55:48] Could not transmit unit 05 to Collection server; keeping in queue.
--- Opening Log file [August 13 07:01:31 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[07:01:31] - Ask before connecting: No
[07:01:31] - User name: Soumitra (Team 69411)
[07:01:31] - User ID: 517E45FD054303B8
[07:01:31] - Machine ID: 1
[07:01:31]
[07:01:32] Loaded queue successfully.
[07:01:32] Initialization complete
[07:01:32]
[07:01:32] + Processing work unit
[07:01:32] Project: 6303 (Run 59, Clone 4, Gen 13)
[07:01:32] - Read packet limit of 540015616... Set to 524286976.
[07:01:32] + Attempting to send results [August 13 07:01:32 UTC]
[07:01:33] Core required: FahCore_78.exe
[07:01:33] Core found.
[07:01:33] - Couldn't send HTTP request to server
[07:01:33] + Could not connect to Work Server (results)
[07:01:33] (171.64.65.111:8080)
[07:01:33] + Retrying using alternative port
[07:01:33] - Couldn't send HTTP request to server
[07:01:33] + Could not connect to Work Server (results)
[07:01:33] (171.64.65.111:80)
[07:01:33] - Error: Could not transmit unit 04 (completed August 10) to work server.
[07:01:33] - Read packet limit of 540015616... Set to 524286976.
[07:01:33] + Attempting to send results [August 13 07:01:33 UTC]
[07:01:33] Working on queue slot 06 [August 13 07:01:33 UTC]
[07:01:33] + Working ...
[07:01:33] - Couldn't send HTTP request to server
[07:01:33] + Could not connect to Work Server (results)
[07:01:33] (171.67.108.17:8080)
[07:01:33] + Retrying using alternative port
[07:01:33] - Couldn't send HTTP request to server
[07:01:33] + Could not connect to Work Server (results)
[07:01:33] (171.67.108.17:80)
[07:01:33] Could not transmit unit 04 to Collection server; keeping in queue.
[07:01:34]
[07:01:34] *------------------------------*
[07:01:34] Folding@Home Gromacs Core
[07:01:34] Version 1.90 (March 8, 2006)
[07:01:34]
[07:01:34] Preparing to commence simulation
[07:01:34] - Looking at optimizations...
[07:01:34] Project: 6303 (Run 379, Clone 7, Gen 3)
[07:01:34] + Attempting to send results [August 13 07:01:34 UTC]
[07:01:35] - Files status OK
[07:01:35] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[07:01:37]
[07:01:37] Project: 6301 (Run 151, Clone 8, Gen 4)
[07:01:37]
[07:01:37] - Couldn't send HTTP request to server
[07:01:37] + Could not connect to Work Server (results)
[07:01:37] (171.64.65.111:8080)
[07:01:37] + Retrying using alternative port
[07:01:37] - Couldn't send HTTP request to server
[07:01:37] + Could not connect to Work Server (results)
[07:01:37] (171.64.65.111:80)
[07:01:37] - Error: Could not transmit unit 05 (completed August 12) to work server.
[07:01:37] + Attempting to send results [August 13 07:01:37 UTC]
[07:01:37] - Couldn't send HTTP request to server
[07:01:37] + Could not connect to Work Server (results)
[07:01:37] (171.67.108.17:8080)
[07:01:37] + Retrying using alternative port
[07:01:37] - Couldn't send HTTP request to server
[07:01:37] + Could not connect to Work Server (results)
[07:01:37] (171.67.108.17:80)
[07:01:37] Could not transmit unit 05 to Collection server; keeping in queue.
[07:01:37] Assembly optimizations on if available.
[07:01:37] Entering M.D.
[07:01:58] (Starting from checkpoint)
[07:01:58] Protein: p6301_sh3_with_ALA_frags
[07:01:58]
[07:01:58] Writing local files
[07:01:58] Completed 182176 out of 500000 steps (36%)
[07:01:58] Extra SSE boost OK.
[07:09:32] Writing local files
[07:09:32] Completed 185000 out of 500000 steps (37%)
[07:22:53] Writing local files
[07:22:53] Completed 190000 out of 500000 steps (38%)
[07:36:31] Writing local files
[07:36:31] Completed 195000 out of 500000 steps (39%)
[07:49:47] Writing local files
[07:49:48] Completed 200000 out of 500000 steps (40%)
[08:02:52] Writing local files
[08:02:52] Completed 205000 out of 500000 steps (41%)
[08:15:37] Writing local files
[08:15:37] Completed 210000 out of 500000 steps (42%)
[08:27:55] Writing local files
[08:27:55] Completed 215000 out of 500000 steps (43%)
[08:39:54] Writing local files
[08:39:54] Completed 220000 out of 500000 steps (44%)
[08:52:00] Writing local files
[08:52:00] Completed 225000 out of 500000 steps (45%)
[09:03:56] Writing local files
[09:03:56] Completed 230000 out of 500000 steps (46%)
[09:15:44] Writing local files
[09:15:44] Completed 235000 out of 500000 steps (47%)
[09:27:53] Writing local files
[09:27:54] Completed 240000 out of 500000 steps (48%)
[09:39:53] Writing local files
[09:39:53] Completed 245000 out of 500000 steps (49%)
[09:52:47] Writing local files
[09:52:47] Completed 250000 out of 500000 steps (50%)
[10:04:26] Writing local files
[10:04:26] Completed 255000 out of 500000 steps (51%)
[10:16:04] Writing local files
[10:16:04] Completed 260000 out of 500000 steps (52%)
[10:27:41] Writing local files
[10:27:41] Completed 265000 out of 500000 steps (53%)
[10:39:39] Writing local files
[10:39:39] Completed 270000 out of 500000 steps (54%)
Folding@Home Client Shutdown.
--- Opening Log file [August 13 11:36:07 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[11:36:07] - Ask before connecting: No
[11:36:07] - User name: Soumitra (Team 69411)
[11:36:07] - User ID: 517E45FD054303B8
[11:36:07] - Machine ID: 1
[11:36:07]
[11:36:07] Loaded queue successfully.
[11:36:07] Initialization complete
[11:36:07]
[11:36:07] + Processing work unit
[11:36:07] Core required: FahCore_78.exe
[11:36:07] Core found.
[11:36:07] Project: 6303 (Run 59, Clone 4, Gen 13)
[11:36:07] - Read packet limit of 540015616... Set to 524286976.
[11:36:07] + Attempting to send results [August 13 11:36:07 UTC]
[11:36:07] Working on queue slot 06 [August 13 11:36:07 UTC]
[11:36:07] + Working ...
[11:36:08]
[11:36:08] *------------------------------*
[11:36:08] Folding@Home Gromacs Core
[11:36:08] Version 1.90 (March 8, 2006)
[11:36:08]
[11:36:08] Preparing to commence simulation
[11:36:08] - Looking at optimizations...
[11:36:08] - Files status OK
[11:36:08] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[11:36:08]
[11:36:08] Project: 6301 (Run 151, Clone 8, Gen 4)
[11:36:08]
[11:36:08] Assembly optimizations on if available.
[11:36:08] Entering M.D.
[11:36:28] (Starting from checkpoint)
[11:36:28] Protein: p6301_sh3_with_ALA_frags
[11:36:28]
[11:36:28] Writing local files
[11:36:29] Completed 270000 out of 500000 steps (54%)
[11:36:29] Extra SSE boost OK.
[11:39:33] - Couldn't send HTTP request to server
[11:39:33] + Could not connect to Work Server (results)
[11:39:33] (171.64.65.111:8080)
[11:39:33] + Retrying using alternative port
[11:39:41] - Couldn't send HTTP request to server
[11:39:41] + Could not connect to Work Server (results)
[11:39:41] (171.64.65.111:80)
[11:39:41] - Error: Could not transmit unit 04 (completed August 10) to work server.
[11:39:41] - Read packet limit of 540015616... Set to 524286976.
[11:39:41] + Attempting to send results [August 13 11:39:41 UTC]
[11:39:42] - Couldn't send HTTP request to server
[11:39:42] + Could not connect to Work Server (results)
[11:39:42] (171.67.108.17:8080)
[11:39:42] + Retrying using alternative port
[11:39:51] - Couldn't send HTTP request to server
[11:39:51] + Could not connect to Work Server (results)
[11:39:51] (171.67.108.17:80)
[11:39:51] Could not transmit unit 04 to Collection server; keeping in queue.
[11:39:51] Project: 6303 (Run 379, Clone 7, Gen 3)
[11:39:51] + Attempting to send results [August 13 11:39:51 UTC]
[11:39:59] - Couldn't send HTTP request to server
[11:39:59] + Could not connect to Work Server (results)
[11:39:59] (171.64.65.111:8080)
[11:39:59] + Retrying using alternative port
[11:40:07] - Couldn't send HTTP request to server
[11:40:07] + Could not connect to Work Server (results)
[11:40:07] (171.64.65.111:80)
[11:40:07] - Error: Could not transmit unit 05 (completed August 12) to work server.
[11:40:07] + Attempting to send results [August 13 11:40:07 UTC]
[11:40:15] - Couldn't send HTTP request to server
[11:40:15] + Could not connect to Work Server (results)
[11:40:15] (171.67.108.17:8080)
[11:40:15] + Retrying using alternative port
[11:40:23] - Couldn't send HTTP request to server
[11:40:23] + Could not connect to Work Server (results)
[11:40:23] (171.67.108.17:80)
[11:40:23] Could not transmit unit 05 to Collection server; keeping in queue.
[11:48:11] Writing local files
[11:48:11] Completed 275000 out of 500000 steps (55%)
[11:59:51] Writing local files
[11:59:51] Completed 280000 out of 500000 steps (56%)
[12:11:33] Writing local files
[12:11:33] Completed 285000 out of 500000 steps (57%)
[12:23:18] Writing local files
[12:23:18] Completed 290000 out of 500000 steps (58%)
[12:35:04] Writing local files
[12:35:04] Completed 295000 out of 500000 steps (59%)
[12:46:52] Writing local files
[12:46:52] Completed 300000 out of 500000 steps (60%)
[12:58:38] Writing local files
[12:58:39] Completed 305000 out of 500000 steps (61%)
--- Opening Log file [August 13 13:12:10 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[13:12:10] - Ask before connecting: No
[13:12:10] - User name: Soumitra (Team 69411)
[13:12:10] - User ID: 517E45FD054303B8
[13:12:10] - Machine ID: 1
[13:12:10]
[13:12:11] Loaded queue successfully.
[13:12:11] Initialization complete
[13:12:11]
[13:12:11] + Processing work unit
[13:12:11] Core required: FahCore_78.exe
[13:12:11] Core found.
[13:12:11] Project: 6303 (Run 59, Clone 4, Gen 13)
[13:12:11] - Read packet limit of 540015616... Set to 524286976.
[13:12:11] + Attempting to send results [August 13 13:12:11 UTC]
[13:12:11] Working on queue slot 06 [August 13 13:12:11 UTC]
[13:12:11] + Working ...
[13:12:11]
[13:12:11] *------------------------------*
[13:12:11] Folding@Home Gromacs Core
[13:12:11] Version 1.90 (March 8, 2006)
[13:12:11]
[13:12:11] Preparing to commence simulation
[13:12:11] - Looking at optimizations...
[13:12:11] - Files status OK
[13:12:11] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[13:12:12]
[13:12:12] Project: 6301 (Run 151, Clone 8, Gen 4)
[13:12:12]
[13:12:13] Assembly optimizations on if available.
[13:12:13] Entering M.D.
[13:12:33] (Starting from checkpoint)
[13:12:33] Protein: p6301_sh3_with_ALA_frags
[13:12:33]
[13:12:33] Writing local files
[13:12:33] Completed 307482 out of 500000 steps (61%)
[13:12:33] Extra SSE boost OK.
[13:13:42] - Couldn't send HTTP request to server
[13:13:42] + Could not connect to Work Server (results)
[13:13:42] (171.64.65.111:8080)
[13:13:42] + Retrying using alternative port
[13:15:44] - Couldn't send HTTP request to server
[13:15:44] + Could not connect to Work Server (results)
[13:15:44] (171.64.65.111:80)
[13:15:44] - Error: Could not transmit unit 04 (completed August 10) to work server.
[13:15:44] - Read packet limit of 540015616... Set to 524286976.
[13:15:44] + Attempting to send results [August 13 13:15:44 UTC]
[13:15:54] - Couldn't send HTTP request to server
[13:15:54] (Got status 503)
[13:15:54] + Could not connect to Work Server (results)
[13:15:54] (171.67.108.17:8080)
[13:15:54] + Retrying using alternative port
[13:15:56] - Couldn't send HTTP request to server
[13:15:56] (Got status 503)
[13:15:56] + Could not connect to Work Server (results)
[13:15:56] (171.67.108.17:80)
[13:15:56] Could not transmit unit 04 to Collection server; keeping in queue.
[13:15:56] Project: 6303 (Run 379, Clone 7, Gen 3)
[13:15:56] + Attempting to send results [August 13 13:15:56 UTC]
[13:16:04] - Couldn't send HTTP request to server
[13:16:04] + Could not connect to Work Server (results)
[13:16:04] (171.64.65.111:8080)
[13:16:04] + Retrying using alternative port
[13:18:45] Writing local files
[13:18:45] Completed 310000 out of 500000 steps (62%)
[13:20:14] - Couldn't send HTTP request to server
[13:20:14] + Could not connect to Work Server (results)
[13:20:14] (171.64.65.111:80)
[13:20:14] - Error: Could not transmit unit 05 (completed August 12) to work server.
[13:20:14] + Attempting to send results [August 13 13:20:14 UTC]
[13:20:15] - Couldn't send HTTP request to server
[13:20:15] + Could not connect to Work Server (results)
[13:20:15] (171.67.108.17:8080)
[13:20:15] + Retrying using alternative port
[13:20:23] - Couldn't send HTTP request to server
[13:20:23] + Could not connect to Work Server (results)
[13:20:23] (171.67.108.17:80)
[13:20:23] Could not transmit unit 05 to Collection server; keeping in queue.
[13:30:53] Writing local files
[13:30:53] Completed 315000 out of 500000 steps (63%)
[13:43:14] Writing local files
[13:43:14] Completed 320000 out of 500000 steps (64%)
[13:55:21] Writing local files
[13:55:21] Completed 325000 out of 500000 steps (65%)
[14:07:00] Writing local files
[14:07:00] Completed 330000 out of 500000 steps (66%)
[14:18:40] Writing local files
[14:18:40] Completed 335000 out of 500000 steps (67%)
[14:30:20] Writing local files
[14:30:20] Completed 340000 out of 500000 steps (68%)
[14:42:00] Writing local files
[14:42:00] Completed 345000 out of 500000 steps (69%)
[14:53:39] Writing local files
[14:53:39] Completed 350000 out of 500000 steps (70%)
[15:05:18] Writing local files
[15:05:18] Completed 355000 out of 500000 steps (71%)
[15:17:12] Writing local files
[15:17:12] Completed 360000 out of 500000 steps (72%)
[15:30:40] Writing local files
[15:30:40] Completed 365000 out of 500000 steps (73%)
[15:44:33] Writing local files
[15:44:33] Completed 370000 out of 500000 steps (74%)
[15:58:03] Writing local files
[15:58:03] Completed 375000 out of 500000 steps (75%)
[16:09:58] Writing local files
[16:09:58] Completed 380000 out of 500000 steps (76%)
[16:21:40] Writing local files
[16:21:40] Completed 385000 out of 500000 steps (77%)
[16:33:23] Writing local files
[16:33:23] Completed 390000 out of 500000 steps (78%)
[16:45:05] Writing local files
[16:45:05] Completed 395000 out of 500000 steps (79%)
[16:57:02] Writing local files
[16:57:02] Completed 400000 out of 500000 steps (80%)
[17:09:22] Writing local files
[17:09:22] Completed 405000 out of 500000 steps (81%)
[17:21:22] Writing local files
[17:21:23] Completed 410000 out of 500000 steps (82%)
[17:33:20] Writing local files
[17:33:20] Completed 415000 out of 500000 steps (83%)
As i was posting this the connection status of server changed to REJECT. Is that a problem, because my WU is in queue for last 3 days.
I have a similar issue with server 171.67.108.17, but i can understand that one as its netload is around 250. I currently have 2 WUs waiting to upload, one of them has failed 25 times and other failed 10 times.
I am not using any proxy and this problem is only with CPU systray client. GPU client is all fine except for today when a WU's upload failed 6 times.
I read other forums and threads but none helped.
Thanks in advance for any help, please solve this issue!!
Intel Core 2 Duo E6550 @ 2.33GHz
2 GB RAM
nVidia Geforce GTX 275 796MB
nVidia nForce 650i Ultra
Folding for guru3d (Team #69411)
2 GB RAM
nVidia Geforce GTX 275 796MB
nVidia nForce 650i Ultra
Folding for guru3d (Team #69411)
Re: 171.64.65.111
In some cases, the results exceed the upload limit and this can cause repeated upload failures. I suggest you run "qfix" from the text screen and look carefully at the output. If it fixes something with that WU, let us know.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
Soumitra
- Posts: 7
- Joined: Tue Feb 10, 2009 10:33 pm
- Hardware configuration: Processor - Intel Core 2 Duo E6550 @ 2.33GHz
Ram - 2 x 1GB DDR2
Motherboard - XFX nVidia 650i Ultra
Graphics Card - nVidia GeForce GTX275 796 MB
HDD - Seagate Barracuda 500GB @ 7400rpm
OS - Windows Vista Home Premium - Location: India
Re: 171.64.65.111
i downloaded and ran qfix and it showed following result
I don't know much about all this so i am posting it here for you. As far as i can see it says everything is OK.
Below is my Log file after enabling -verbose 9 flag and running qfix and restarting the client (which i shutdown to run qfix). Maybe this will help
Thanks for the quick reply
Code: Select all
C:\Users\Sam\AppData\Roaming\Folding@home-x86>qfix
entry 7, status 0, address 171.67.108.20:8080
entry 8, status 0, address 171.67.108.20:8080
entry 9, status 0, address 171.67.108.12:8080
entry 0, status 0, address 171.65.103.162:8080
entry 1, status 0, address 171.64.65.111:8080
entry 2, status 0, address 171.67.108.13:8080
entry 3, status 0, address 171.64.65.111:8080
entry 4, status 2, address 171.64.65.111:8080
Found results <work\wuresults_04.dat>: proj 6303, run 59, clone 4, gen 13
-- queue entry: proj 6303, run 59, clone 4, gen 13
-- already queued for upload
entry 5, status 2, address 171.64.65.111:8080
Found results <work\wuresults_05.dat>: proj 6303, run 379, clone 7, gen 3
-- queue entry: proj 6303, run 379, clone 7, gen 3
-- already queued for upload
entry 6, status 1, address 171.64.65.111:8080
File is OK
I don't know much about all this so i am posting it here for you. As far as i can see it says everything is OK.
Below is my Log file after enabling -verbose 9 flag and running qfix and restarting the client (which i shutdown to run qfix). Maybe this will help
Code: Select all
--- Opening Log file [August 12 15:54:58 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[15:54:58] - Ask before connecting: Yes
[15:54:58] - Proxy: localhost:8080
[15:54:58] - User name: Soumitra (Team 69411)
[15:54:58] - User ID: 517E45FD054303B8
[15:54:58] - Machine ID: 1
[15:54:58]
[15:54:58] Loaded queue successfully.
[15:54:58] Initialization complete
[15:54:58]
[15:54:58] + Processing work unit
[15:54:58] Project: 6303 (Run 59, Clone 4, Gen 13)
[15:54:58] - Read packet limit of 540015616... Set to 524286976.
[15:54:58] + Attempting to send results [August 12 15:54:58 UTC]
[15:54:58] Core required: FahCore_78.exe
[15:54:58] Core found.
[15:54:58] Working on queue slot 06 [August 12 15:54:58 UTC]
[15:54:58] + Working ...
[15:54:58] - Presenting message box asking to network.
[15:54:58]
[15:54:58] *------------------------------*
[15:54:58] Folding@Home Gromacs Core
[15:54:58] Version 1.90 (March 8, 2006)
[15:54:58]
[15:54:58] Preparing to commence simulation
[15:54:58] - Looking at optimizations...
[15:54:58] - Files status OK
[15:54:59] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[15:54:59]
[15:54:59] Project: 6301 (Run 151, Clone 8, Gen 4)
[15:54:59]
[15:54:59] Assembly optimizations on if available.
[15:54:59] Entering M.D.
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.64.65.111:8080)
[15:55:02] + Retrying using alternative port
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.64.65.111:80)
[15:55:02] - Error: Could not transmit unit 04 (completed August 10) to work server.
[15:55:02] - Read packet limit of 540015616... Set to 524286976.
[15:55:02] + Attempting to send results [August 12 15:55:02 UTC]
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.67.108.17:8080)
[15:55:02] + Retrying using alternative port
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.67.108.17:80)
[15:55:02] Could not transmit unit 04 to Collection server; keeping in queue.
[15:55:02] Project: 6303 (Run 379, Clone 7, Gen 3)
[15:55:02] + Attempting to send results [August 12 15:55:02 UTC]
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.64.65.111:8080)
[15:55:02] + Retrying using alternative port
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.64.65.111:80)
[15:55:02] - Error: Could not transmit unit 05 (completed August 12) to work server.
[15:55:02] + Attempting to send results [August 12 15:55:02 UTC]
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.67.108.17:8080)
[15:55:02] + Retrying using alternative port
[15:55:02] - Couldn't send HTTP request to server
[15:55:02] + Could not connect to Work Server (results)
[15:55:02] (171.67.108.17:80)
[15:55:02] Could not transmit unit 05 to Collection server; keeping in queue.
[15:55:19] (Starting from checkpoint)
[15:55:19] Protein: p6301_sh3_with_ALA_frags
[15:55:19]
[15:55:19] Writing local files
[15:55:19] Completed 22332 out of 500000 steps (4%)
[15:55:19] Extra SSE boost OK.
Folding@Home Client Shutdown.
--- Opening Log file [August 12 16:02:23 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[16:02:23] - Ask before connecting: No
[16:02:23] - User name: Soumitra (Team 69411)
[16:02:23] - User ID: 517E45FD054303B8
[16:02:23] - Machine ID: 1
[16:02:23]
[16:02:23] Loaded queue successfully.
[16:02:23] Initialization complete
[16:02:23]
[16:02:23] + Processing work unit
[16:02:23] Project: 6303 (Run 59, Clone 4, Gen 13)
[16:02:23] - Read packet limit of 540015616... Set to 524286976.
[16:02:23] + Attempting to send results [August 12 16:02:23 UTC]
[16:02:23] Core required: FahCore_78.exe
[16:02:23] Core found.
[16:02:23] Working on queue slot 06 [August 12 16:02:23 UTC]
[16:02:23] + Working ...
[16:02:23]
[16:02:23] *------------------------------*
[16:02:23] Folding@Home Gromacs Core
[16:02:23] Version 1.90 (March 8, 2006)
[16:02:23]
[16:02:23] Preparing to commence simulation
[16:02:23] - Looking at optimizations...
[16:02:23] - Files status OK
[16:02:24] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[16:02:24]
[16:02:24] Project: 6301 (Run 151, Clone 8, Gen 4)
[16:02:24]
[16:02:24] Assembly optimizations on if available.
[16:02:24] Entering M.D.
[16:02:44] (Starting from checkpoint)
[16:02:44] Protein: p6301_sh3_with_ALA_frags
[16:02:44]
[16:02:44] Writing local files
[16:02:44] Completed 22332 out of 500000 steps (4%)
[16:02:44] Extra SSE boost OK.
[16:07:54] - Couldn't send HTTP request to server
[16:07:54] + Could not connect to Work Server (results)
[16:07:54] (171.64.65.111:8080)
[16:07:54] + Retrying using alternative port
[16:09:11] Writing local files
[16:09:11] Completed 25000 out of 500000 steps (5%)
[16:15:26] - Couldn't send HTTP request to server
[16:15:26] + Could not connect to Work Server (results)
[16:15:26] (171.64.65.111:80)
[16:15:26] - Error: Could not transmit unit 04 (completed August 10) to work server.
[16:15:26] - Read packet limit of 540015616... Set to 524286976.
[16:15:26] + Attempting to send results [August 12 16:15:26 UTC]
[16:15:27] - Couldn't send HTTP request to server
[16:15:27] (Got status 503)
[16:15:27] + Could not connect to Work Server (results)
[16:15:27] (171.67.108.17:8080)
[16:15:27] + Retrying using alternative port
[16:15:27] - Couldn't send HTTP request to server
[16:15:27] (Got status 503)
[16:15:27] + Could not connect to Work Server (results)
[16:15:27] (171.67.108.17:80)
[16:15:27] Could not transmit unit 04 to Collection server; keeping in queue.
[16:15:27] Project: 6303 (Run 379, Clone 7, Gen 3)
[16:15:27] + Attempting to send results [August 12 16:15:27 UTC]
[16:19:14] - Couldn't send HTTP request to server
[16:19:14] + Could not connect to Work Server (results)
[16:19:14] (171.64.65.111:8080)
[16:19:14] + Retrying using alternative port
[16:20:57] Writing local files
[16:20:57] Completed 30000 out of 500000 steps (6%)
[16:21:54] - Couldn't send HTTP request to server
[16:21:54] + Could not connect to Work Server (results)
[16:21:54] (171.64.65.111:80)
[16:21:54] - Error: Could not transmit unit 05 (completed August 12) to work server.
[16:21:54] + Attempting to send results [August 12 16:21:54 UTC]
[16:21:54] - Couldn't send HTTP request to server
[16:21:54] (Got status 503)
[16:21:54] + Could not connect to Work Server (results)
[16:21:54] (171.67.108.17:8080)
[16:21:54] + Retrying using alternative port
[16:21:55] - Couldn't send HTTP request to server
[16:21:55] (Got status 503)
[16:21:55] + Could not connect to Work Server (results)
[16:21:55] (171.67.108.17:80)
[16:21:55] Could not transmit unit 05 to Collection server; keeping in queue.
[16:32:38] Writing local files
[16:32:38] Completed 35000 out of 500000 steps (7%)
[16:44:46] Writing local files
[16:44:46] Completed 40000 out of 500000 steps (8%)
[16:56:37] Writing local files
[16:56:37] Completed 45000 out of 500000 steps (9%)
[17:08:28] Writing local files
[17:08:28] Completed 50000 out of 500000 steps (10%)
[17:20:07] Writing local files
[17:20:07] Completed 55000 out of 500000 steps (11%)
[17:31:46] Writing local files
[17:31:46] Completed 60000 out of 500000 steps (12%)
[17:43:24] Writing local files
[17:43:24] Completed 65000 out of 500000 steps (13%)
[17:55:04] Writing local files
[17:55:04] Completed 70000 out of 500000 steps (14%)
[18:06:48] Writing local files
[18:06:48] Completed 75000 out of 500000 steps (15%)
[18:20:07] Writing local files
[18:20:07] Completed 80000 out of 500000 steps (16%)
[18:33:41] Writing local files
[18:33:41] Completed 85000 out of 500000 steps (17%)
[18:47:03] Writing local files
[18:47:03] Completed 90000 out of 500000 steps (18%)
[19:00:36] Writing local files
[19:00:36] Completed 95000 out of 500000 steps (19%)
Folding@Home Client Shutdown.
--- Opening Log file [August 12 19:18:08 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[19:18:08] - Ask before connecting: No
[19:18:08] - User name: Soumitra (Team 69411)
[19:18:08] - User ID: 517E45FD054303B8
[19:18:08] - Machine ID: 1
[19:18:08]
[19:18:08] Loaded queue successfully.
[19:18:08] Initialization complete
[19:18:08]
[19:18:08] + Processing work unit
[19:18:08] Core required: FahCore_78.exe
[19:18:08] Project: 6303 (Run 59, Clone 4, Gen 13)
[19:18:08] - Read packet limit of 540015616... Set to 524286976.
Core found.
[19:18:08] + Attempting to send results [August 12 19:18:08 UTC]
[19:18:08] Working on queue slot 06 [August 12 19:18:08 UTC]
[19:18:08] + Working ...
[19:18:08]
[19:18:08] *------------------------------*
[19:18:08] Folding@Home Gromacs Core
[19:18:08] Version 1.90 (March 8, 2006)
[19:18:08]
[19:18:08] Preparing to commence simulation
[19:18:08] - Looking at optimizations...
[19:18:08] - Files status OK
[19:18:09] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[19:18:10]
[19:18:10] Project: 6301 (Run 151, Clone 8, Gen 4)
[19:18:10]
[19:18:10] Assembly optimizations on if available.
[19:18:10] Entering M.D.
[19:18:12] - Couldn't send HTTP request to server
[19:18:12] + Could not connect to Work Server (results)
[19:18:12] (171.64.65.111:8080)
[19:18:12] + Retrying using alternative port
[19:18:31] (Starting from checkpoint)
[19:18:31] Protein: p6301_sh3_with_ALA_frags
[19:18:31]
[19:18:31] Writing local files
[19:18:31] Completed 97300 out of 500000 steps (19%)
[19:18:31] Extra SSE boost OK.
[19:19:43] - Couldn't send HTTP request to server
[19:19:43] + Could not connect to Work Server (results)
[19:19:43] (171.64.65.111:80)
[19:19:43] - Error: Could not transmit unit 04 (completed August 10) to work server.
[19:19:43] - Read packet limit of 540015616... Set to 524286976.
[19:19:43] + Attempting to send results [August 12 19:19:43 UTC]
[19:19:45] - Couldn't send HTTP request to server
[19:19:45] + Could not connect to Work Server (results)
[19:19:45] (171.67.108.17:8080)
[19:19:45] + Retrying using alternative port
[19:19:54] - Couldn't send HTTP request to server
[19:19:54] + Could not connect to Work Server (results)
[19:19:54] (171.67.108.17:80)
[19:19:54] Could not transmit unit 04 to Collection server; keeping in queue.
[19:19:54] Project: 6303 (Run 379, Clone 7, Gen 3)
[19:19:54] + Attempting to send results [August 12 19:19:54 UTC]
[19:20:03] - Couldn't send HTTP request to server
[19:20:03] + Could not connect to Work Server (results)
[19:20:03] (171.64.65.111:8080)
[19:20:03] + Retrying using alternative port
[19:20:11] - Couldn't send HTTP request to server
[19:20:11] + Could not connect to Work Server (results)
[19:20:11] (171.64.65.111:80)
[19:20:11] - Error: Could not transmit unit 05 (completed August 12) to work server.
[19:20:11] + Attempting to send results [August 12 19:20:11 UTC]
[19:20:12] - Couldn't send HTTP request to server
[19:20:12] + Could not connect to Work Server (results)
[19:20:12] (171.67.108.17:8080)
[19:20:12] + Retrying using alternative port
[19:20:21] - Couldn't send HTTP request to server
[19:20:21] + Could not connect to Work Server (results)
[19:20:21] (171.67.108.17:80)
[19:20:21] Could not transmit unit 05 to Collection server; keeping in queue.
[19:25:07] Writing local files
[19:25:07] Completed 100000 out of 500000 steps (20%)
[19:37:17] Writing local files
[19:37:18] Completed 105000 out of 500000 steps (21%)
[19:49:43] Writing local files
[19:49:43] Completed 110000 out of 500000 steps (22%)
[20:02:06] Writing local files
[20:02:06] Completed 115000 out of 500000 steps (23%)
[20:14:11] Writing local files
[20:14:11] Completed 120000 out of 500000 steps (24%)
[20:26:00] Writing local files
[20:26:00] Completed 125000 out of 500000 steps (25%)
[20:37:50] Writing local files
[20:37:50] Completed 130000 out of 500000 steps (26%)
[20:49:45] Writing local files
[20:49:45] Completed 135000 out of 500000 steps (27%)
[21:04:33] Writing local files
[21:04:34] Completed 140000 out of 500000 steps (28%)
[21:16:22] Writing local files
[21:16:22] Completed 145000 out of 500000 steps (29%)
[21:28:11] Writing local files
[21:28:11] Completed 150000 out of 500000 steps (30%)
[21:40:00] Writing local files
[21:40:00] Completed 155000 out of 500000 steps (31%)
[21:51:48] Writing local files
[21:51:49] Completed 160000 out of 500000 steps (32%)
[22:03:38] Writing local files
[22:03:38] Completed 165000 out of 500000 steps (33%)
[22:15:26] Writing local files
[22:15:26] Completed 170000 out of 500000 steps (34%)
[22:27:14] Writing local files
[22:27:14] Completed 175000 out of 500000 steps (35%)
[22:38:55] Writing local files
[22:38:55] Completed 180000 out of 500000 steps (36%)
Folding@Home Client Shutdown.
--- Opening Log file [August 12 22:47:22 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[22:47:22] - Ask before connecting: No
[22:47:22] - User name: Soumitra (Team 69411)
[22:47:22] - User ID: 517E45FD054303B8
[22:47:22] - Machine ID: 1
[22:47:22]
[22:47:23] Loaded queue successfully.
[22:47:23] Initialization complete
[22:47:23]
[22:47:23] + Processing work unit
[22:47:23] Core required: FahCore_78.exe
[22:47:23] Core found.
[22:47:23] Project: 6303 (Run 59, Clone 4, Gen 13)
[22:47:23] - Read packet limit of 540015616... Set to 524286976.
[22:47:23] + Attempting to send results [August 12 22:47:23 UTC]
[22:47:23] Working on queue slot 06 [August 12 22:47:23 UTC]
[22:47:23] + Working ...
[22:47:23]
[22:47:23] *------------------------------*
[22:47:23] Folding@Home Gromacs Core
[22:47:23] Version 1.90 (March 8, 2006)
[22:47:23]
[22:47:23] Preparing to commence simulation
[22:47:23] - Looking at optimizations...
[22:47:23] - Files status OK
[22:47:23] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[22:47:23]
[22:47:23] Project: 6301 (Run 151, Clone 8, Gen 4)
[22:47:23]
[22:47:23] Assembly optimizations on if available.
[22:47:23] Entering M.D.
[22:47:44] (Starting from checkpoint)
[22:47:44] Protein: p6301_sh3_with_ALA_frags
[22:47:44]
[22:47:44] Writing local files
[22:47:44] Completed 180000 out of 500000 steps (36%)
[22:47:44] Extra SSE boost OK.
[22:48:40] - Couldn't send HTTP request to server
[22:48:40] + Could not connect to Work Server (results)
[22:48:40] (171.64.65.111:8080)
[22:48:40] + Retrying using alternative port
[22:50:32] - Couldn't send HTTP request to server
[22:50:32] + Could not connect to Work Server (results)
[22:50:32] (171.64.65.111:80)
[22:50:32] - Error: Could not transmit unit 04 (completed August 10) to work server.
[22:50:32] - Read packet limit of 540015616... Set to 524286976.
[22:50:32] + Attempting to send results [August 12 22:50:32 UTC]
[22:50:33] - Couldn't send HTTP request to server
[22:50:33] + Could not connect to Work Server (results)
[22:50:33] (171.67.108.17:8080)
[22:50:33] + Retrying using alternative port
[22:50:42] - Couldn't send HTTP request to server
[22:50:42] + Could not connect to Work Server (results)
[22:50:42] (171.67.108.17:80)
[22:50:42] Could not transmit unit 04 to Collection server; keeping in queue.
[22:50:42] Project: 6303 (Run 379, Clone 7, Gen 3)
[22:50:42] + Attempting to send results [August 12 22:50:42 UTC]
[22:53:29] - Couldn't send HTTP request to server
[22:53:29] + Could not connect to Work Server (results)
[22:53:29] (171.64.65.111:8080)
[22:53:29] + Retrying using alternative port
[22:55:38] - Couldn't send HTTP request to server
[22:55:38] + Could not connect to Work Server (results)
[22:55:38] (171.64.65.111:80)
[22:55:38] - Error: Could not transmit unit 05 (completed August 12) to work server.
[22:55:38] + Attempting to send results [August 12 22:55:38 UTC]
[22:55:40] - Couldn't send HTTP request to server
[22:55:40] + Could not connect to Work Server (results)
[22:55:40] (171.67.108.17:8080)
[22:55:40] + Retrying using alternative port
[22:55:48] - Couldn't send HTTP request to server
[22:55:48] + Could not connect to Work Server (results)
[22:55:48] (171.67.108.17:80)
[22:55:48] Could not transmit unit 05 to Collection server; keeping in queue.
--- Opening Log file [August 13 07:01:31 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[07:01:31] - Ask before connecting: No
[07:01:31] - User name: Soumitra (Team 69411)
[07:01:31] - User ID: 517E45FD054303B8
[07:01:31] - Machine ID: 1
[07:01:31]
[07:01:32] Loaded queue successfully.
[07:01:32] Initialization complete
[07:01:32]
[07:01:32] + Processing work unit
[07:01:32] Project: 6303 (Run 59, Clone 4, Gen 13)
[07:01:32] - Read packet limit of 540015616... Set to 524286976.
[07:01:32] + Attempting to send results [August 13 07:01:32 UTC]
[07:01:33] Core required: FahCore_78.exe
[07:01:33] Core found.
[07:01:33] - Couldn't send HTTP request to server
[07:01:33] + Could not connect to Work Server (results)
[07:01:33] (171.64.65.111:8080)
[07:01:33] + Retrying using alternative port
[07:01:33] - Couldn't send HTTP request to server
[07:01:33] + Could not connect to Work Server (results)
[07:01:33] (171.64.65.111:80)
[07:01:33] - Error: Could not transmit unit 04 (completed August 10) to work server.
[07:01:33] - Read packet limit of 540015616... Set to 524286976.
[07:01:33] + Attempting to send results [August 13 07:01:33 UTC]
[07:01:33] Working on queue slot 06 [August 13 07:01:33 UTC]
[07:01:33] + Working ...
[07:01:33] - Couldn't send HTTP request to server
[07:01:33] + Could not connect to Work Server (results)
[07:01:33] (171.67.108.17:8080)
[07:01:33] + Retrying using alternative port
[07:01:33] - Couldn't send HTTP request to server
[07:01:33] + Could not connect to Work Server (results)
[07:01:33] (171.67.108.17:80)
[07:01:33] Could not transmit unit 04 to Collection server; keeping in queue.
[07:01:34]
[07:01:34] *------------------------------*
[07:01:34] Folding@Home Gromacs Core
[07:01:34] Version 1.90 (March 8, 2006)
[07:01:34]
[07:01:34] Preparing to commence simulation
[07:01:34] - Looking at optimizations...
[07:01:34] Project: 6303 (Run 379, Clone 7, Gen 3)
[07:01:34] + Attempting to send results [August 13 07:01:34 UTC]
[07:01:35] - Files status OK
[07:01:35] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[07:01:37]
[07:01:37] Project: 6301 (Run 151, Clone 8, Gen 4)
[07:01:37]
[07:01:37] - Couldn't send HTTP request to server
[07:01:37] + Could not connect to Work Server (results)
[07:01:37] (171.64.65.111:8080)
[07:01:37] + Retrying using alternative port
[07:01:37] - Couldn't send HTTP request to server
[07:01:37] + Could not connect to Work Server (results)
[07:01:37] (171.64.65.111:80)
[07:01:37] - Error: Could not transmit unit 05 (completed August 12) to work server.
[07:01:37] + Attempting to send results [August 13 07:01:37 UTC]
[07:01:37] - Couldn't send HTTP request to server
[07:01:37] + Could not connect to Work Server (results)
[07:01:37] (171.67.108.17:8080)
[07:01:37] + Retrying using alternative port
[07:01:37] - Couldn't send HTTP request to server
[07:01:37] + Could not connect to Work Server (results)
[07:01:37] (171.67.108.17:80)
[07:01:37] Could not transmit unit 05 to Collection server; keeping in queue.
[07:01:37] Assembly optimizations on if available.
[07:01:37] Entering M.D.
[07:01:58] (Starting from checkpoint)
[07:01:58] Protein: p6301_sh3_with_ALA_frags
[07:01:58]
[07:01:58] Writing local files
[07:01:58] Completed 182176 out of 500000 steps (36%)
[07:01:58] Extra SSE boost OK.
[07:09:32] Writing local files
[07:09:32] Completed 185000 out of 500000 steps (37%)
[07:22:53] Writing local files
[07:22:53] Completed 190000 out of 500000 steps (38%)
[07:36:31] Writing local files
[07:36:31] Completed 195000 out of 500000 steps (39%)
[07:49:47] Writing local files
[07:49:48] Completed 200000 out of 500000 steps (40%)
[08:02:52] Writing local files
[08:02:52] Completed 205000 out of 500000 steps (41%)
[08:15:37] Writing local files
[08:15:37] Completed 210000 out of 500000 steps (42%)
[08:27:55] Writing local files
[08:27:55] Completed 215000 out of 500000 steps (43%)
[08:39:54] Writing local files
[08:39:54] Completed 220000 out of 500000 steps (44%)
[08:52:00] Writing local files
[08:52:00] Completed 225000 out of 500000 steps (45%)
[09:03:56] Writing local files
[09:03:56] Completed 230000 out of 500000 steps (46%)
[09:15:44] Writing local files
[09:15:44] Completed 235000 out of 500000 steps (47%)
[09:27:53] Writing local files
[09:27:54] Completed 240000 out of 500000 steps (48%)
[09:39:53] Writing local files
[09:39:53] Completed 245000 out of 500000 steps (49%)
[09:52:47] Writing local files
[09:52:47] Completed 250000 out of 500000 steps (50%)
[10:04:26] Writing local files
[10:04:26] Completed 255000 out of 500000 steps (51%)
[10:16:04] Writing local files
[10:16:04] Completed 260000 out of 500000 steps (52%)
[10:27:41] Writing local files
[10:27:41] Completed 265000 out of 500000 steps (53%)
[10:39:39] Writing local files
[10:39:39] Completed 270000 out of 500000 steps (54%)
Folding@Home Client Shutdown.
--- Opening Log file [August 13 11:36:07 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[11:36:07] - Ask before connecting: No
[11:36:07] - User name: Soumitra (Team 69411)
[11:36:07] - User ID: 517E45FD054303B8
[11:36:07] - Machine ID: 1
[11:36:07]
[11:36:07] Loaded queue successfully.
[11:36:07] Initialization complete
[11:36:07]
[11:36:07] + Processing work unit
[11:36:07] Core required: FahCore_78.exe
[11:36:07] Core found.
[11:36:07] Project: 6303 (Run 59, Clone 4, Gen 13)
[11:36:07] - Read packet limit of 540015616... Set to 524286976.
[11:36:07] + Attempting to send results [August 13 11:36:07 UTC]
[11:36:07] Working on queue slot 06 [August 13 11:36:07 UTC]
[11:36:07] + Working ...
[11:36:08]
[11:36:08] *------------------------------*
[11:36:08] Folding@Home Gromacs Core
[11:36:08] Version 1.90 (March 8, 2006)
[11:36:08]
[11:36:08] Preparing to commence simulation
[11:36:08] - Looking at optimizations...
[11:36:08] - Files status OK
[11:36:08] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[11:36:08]
[11:36:08] Project: 6301 (Run 151, Clone 8, Gen 4)
[11:36:08]
[11:36:08] Assembly optimizations on if available.
[11:36:08] Entering M.D.
[11:36:28] (Starting from checkpoint)
[11:36:28] Protein: p6301_sh3_with_ALA_frags
[11:36:28]
[11:36:28] Writing local files
[11:36:29] Completed 270000 out of 500000 steps (54%)
[11:36:29] Extra SSE boost OK.
[11:39:33] - Couldn't send HTTP request to server
[11:39:33] + Could not connect to Work Server (results)
[11:39:33] (171.64.65.111:8080)
[11:39:33] + Retrying using alternative port
[11:39:41] - Couldn't send HTTP request to server
[11:39:41] + Could not connect to Work Server (results)
[11:39:41] (171.64.65.111:80)
[11:39:41] - Error: Could not transmit unit 04 (completed August 10) to work server.
[11:39:41] - Read packet limit of 540015616... Set to 524286976.
[11:39:41] + Attempting to send results [August 13 11:39:41 UTC]
[11:39:42] - Couldn't send HTTP request to server
[11:39:42] + Could not connect to Work Server (results)
[11:39:42] (171.67.108.17:8080)
[11:39:42] + Retrying using alternative port
[11:39:51] - Couldn't send HTTP request to server
[11:39:51] + Could not connect to Work Server (results)
[11:39:51] (171.67.108.17:80)
[11:39:51] Could not transmit unit 04 to Collection server; keeping in queue.
[11:39:51] Project: 6303 (Run 379, Clone 7, Gen 3)
[11:39:51] + Attempting to send results [August 13 11:39:51 UTC]
[11:39:59] - Couldn't send HTTP request to server
[11:39:59] + Could not connect to Work Server (results)
[11:39:59] (171.64.65.111:8080)
[11:39:59] + Retrying using alternative port
[11:40:07] - Couldn't send HTTP request to server
[11:40:07] + Could not connect to Work Server (results)
[11:40:07] (171.64.65.111:80)
[11:40:07] - Error: Could not transmit unit 05 (completed August 12) to work server.
[11:40:07] + Attempting to send results [August 13 11:40:07 UTC]
[11:40:15] - Couldn't send HTTP request to server
[11:40:15] + Could not connect to Work Server (results)
[11:40:15] (171.67.108.17:8080)
[11:40:15] + Retrying using alternative port
[11:40:23] - Couldn't send HTTP request to server
[11:40:23] + Could not connect to Work Server (results)
[11:40:23] (171.67.108.17:80)
[11:40:23] Could not transmit unit 05 to Collection server; keeping in queue.
[11:48:11] Writing local files
[11:48:11] Completed 275000 out of 500000 steps (55%)
[11:59:51] Writing local files
[11:59:51] Completed 280000 out of 500000 steps (56%)
[12:11:33] Writing local files
[12:11:33] Completed 285000 out of 500000 steps (57%)
[12:23:18] Writing local files
[12:23:18] Completed 290000 out of 500000 steps (58%)
[12:35:04] Writing local files
[12:35:04] Completed 295000 out of 500000 steps (59%)
[12:46:52] Writing local files
[12:46:52] Completed 300000 out of 500000 steps (60%)
[12:58:38] Writing local files
[12:58:39] Completed 305000 out of 500000 steps (61%)
--- Opening Log file [August 13 13:12:10 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
[13:12:10] - Ask before connecting: No
[13:12:10] - User name: Soumitra (Team 69411)
[13:12:10] - User ID: 517E45FD054303B8
[13:12:10] - Machine ID: 1
[13:12:10]
[13:12:11] Loaded queue successfully.
[13:12:11] Initialization complete
[13:12:11]
[13:12:11] + Processing work unit
[13:12:11] Core required: FahCore_78.exe
[13:12:11] Core found.
[13:12:11] Project: 6303 (Run 59, Clone 4, Gen 13)
[13:12:11] - Read packet limit of 540015616... Set to 524286976.
[13:12:11] + Attempting to send results [August 13 13:12:11 UTC]
[13:12:11] Working on queue slot 06 [August 13 13:12:11 UTC]
[13:12:11] + Working ...
[13:12:11]
[13:12:11] *------------------------------*
[13:12:11] Folding@Home Gromacs Core
[13:12:11] Version 1.90 (March 8, 2006)
[13:12:11]
[13:12:11] Preparing to commence simulation
[13:12:11] - Looking at optimizations...
[13:12:11] - Files status OK
[13:12:11] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[13:12:12]
[13:12:12] Project: 6301 (Run 151, Clone 8, Gen 4)
[13:12:12]
[13:12:13] Assembly optimizations on if available.
[13:12:13] Entering M.D.
[13:12:33] (Starting from checkpoint)
[13:12:33] Protein: p6301_sh3_with_ALA_frags
[13:12:33]
[13:12:33] Writing local files
[13:12:33] Completed 307482 out of 500000 steps (61%)
[13:12:33] Extra SSE boost OK.
[13:13:42] - Couldn't send HTTP request to server
[13:13:42] + Could not connect to Work Server (results)
[13:13:42] (171.64.65.111:8080)
[13:13:42] + Retrying using alternative port
[13:15:44] - Couldn't send HTTP request to server
[13:15:44] + Could not connect to Work Server (results)
[13:15:44] (171.64.65.111:80)
[13:15:44] - Error: Could not transmit unit 04 (completed August 10) to work server.
[13:15:44] - Read packet limit of 540015616... Set to 524286976.
[13:15:44] + Attempting to send results [August 13 13:15:44 UTC]
[13:15:54] - Couldn't send HTTP request to server
[13:15:54] (Got status 503)
[13:15:54] + Could not connect to Work Server (results)
[13:15:54] (171.67.108.17:8080)
[13:15:54] + Retrying using alternative port
[13:15:56] - Couldn't send HTTP request to server
[13:15:56] (Got status 503)
[13:15:56] + Could not connect to Work Server (results)
[13:15:56] (171.67.108.17:80)
[13:15:56] Could not transmit unit 04 to Collection server; keeping in queue.
[13:15:56] Project: 6303 (Run 379, Clone 7, Gen 3)
[13:15:56] + Attempting to send results [August 13 13:15:56 UTC]
[13:16:04] - Couldn't send HTTP request to server
[13:16:04] + Could not connect to Work Server (results)
[13:16:04] (171.64.65.111:8080)
[13:16:04] + Retrying using alternative port
[13:18:45] Writing local files
[13:18:45] Completed 310000 out of 500000 steps (62%)
[13:20:14] - Couldn't send HTTP request to server
[13:20:14] + Could not connect to Work Server (results)
[13:20:14] (171.64.65.111:80)
[13:20:14] - Error: Could not transmit unit 05 (completed August 12) to work server.
[13:20:14] + Attempting to send results [August 13 13:20:14 UTC]
[13:20:15] - Couldn't send HTTP request to server
[13:20:15] + Could not connect to Work Server (results)
[13:20:15] (171.67.108.17:8080)
[13:20:15] + Retrying using alternative port
[13:20:23] - Couldn't send HTTP request to server
[13:20:23] + Could not connect to Work Server (results)
[13:20:23] (171.67.108.17:80)
[13:20:23] Could not transmit unit 05 to Collection server; keeping in queue.
[13:30:53] Writing local files
[13:30:53] Completed 315000 out of 500000 steps (63%)
[13:43:14] Writing local files
[13:43:14] Completed 320000 out of 500000 steps (64%)
[13:55:21] Writing local files
[13:55:21] Completed 325000 out of 500000 steps (65%)
[14:07:00] Writing local files
[14:07:00] Completed 330000 out of 500000 steps (66%)
[14:18:40] Writing local files
[14:18:40] Completed 335000 out of 500000 steps (67%)
[14:30:20] Writing local files
[14:30:20] Completed 340000 out of 500000 steps (68%)
[14:42:00] Writing local files
[14:42:00] Completed 345000 out of 500000 steps (69%)
[14:53:39] Writing local files
[14:53:39] Completed 350000 out of 500000 steps (70%)
[15:05:18] Writing local files
[15:05:18] Completed 355000 out of 500000 steps (71%)
[15:17:12] Writing local files
[15:17:12] Completed 360000 out of 500000 steps (72%)
[15:30:40] Writing local files
[15:30:40] Completed 365000 out of 500000 steps (73%)
[15:44:33] Writing local files
[15:44:33] Completed 370000 out of 500000 steps (74%)
[15:58:03] Writing local files
[15:58:03] Completed 375000 out of 500000 steps (75%)
[16:09:58] Writing local files
[16:09:58] Completed 380000 out of 500000 steps (76%)
[16:21:40] Writing local files
[16:21:40] Completed 385000 out of 500000 steps (77%)
[16:33:23] Writing local files
[16:33:23] Completed 390000 out of 500000 steps (78%)
[16:45:05] Writing local files
[16:45:05] Completed 395000 out of 500000 steps (79%)
[16:57:02] Writing local files
[16:57:02] Completed 400000 out of 500000 steps (80%)
[17:09:22] Writing local files
[17:09:22] Completed 405000 out of 500000 steps (81%)
[17:21:22] Writing local files
[17:21:23] Completed 410000 out of 500000 steps (82%)
[17:33:20] Writing local files
[17:33:20] Completed 415000 out of 500000 steps (83%)
[17:45:40] Writing local files
[17:45:40] Completed 420000 out of 500000 steps (84%)
[17:58:11] Writing local files
[17:58:11] Completed 425000 out of 500000 steps (85%)
[18:10:08] Writing local files
[18:10:08] Completed 430000 out of 500000 steps (86%)
[18:15:26] ***** Got a SIGTERM signal (2)
[18:15:26] Killing all core threads
Folding@Home Client Shutdown.
--- Opening Log file [August 13 18:25:30 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
Arguments: -verbosity 9
[18:25:30] - Ask before connecting: No
[18:25:30] - User name: Soumitra (Team 69411)
[18:25:30] - User ID: 517E45FD054303B8
[18:25:30] - Machine ID: 1
[18:25:30]
[18:25:30] Loaded queue successfully.
[18:25:30] Initialization complete
[18:25:30]
[18:25:30] + Processing work unit
[18:25:30] - Autosending finished units... [August 13 18:25:30 UTC]
[18:25:30] Trying to send all finished work units
[18:25:30] Project: 6303 (Run 59, Clone 4, Gen 13)
[18:25:30] - Read packet limit of 540015616... Set to 524286976.
[18:25:30] + Attempting to send results [August 13 18:25:30 UTC]
[18:25:30] Core required: FahCore_78.exe
[18:25:30] Core found.
[18:25:30] - Reading file work/wuresults_04.dat from core
[18:25:30] (Read 4786865 bytes from disk)
[18:25:30] Connecting to http://171.64.65.111:8080/
[18:25:30] Working on queue slot 06 [August 13 18:25:30 UTC]
[18:25:30] + Working ...
[18:25:30] - Calling '.\FahCore_78.exe -dir work/ -suffix 06 -nocpulock -checkpoint 5 -verbose -lifeline 2836 -version 623'
[18:25:31]
[18:25:31] *------------------------------*
[18:25:31] Folding@Home Gromacs Core
[18:25:31] Version 1.90 (March 8, 2006)
[18:25:31]
[18:25:31] Preparing to commence simulation
[18:25:31] - Looking at optimizations...
[18:25:31] - Files status OK
[18:25:31] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[18:25:31]
[18:25:31] Project: 6301 (Run 151, Clone 8, Gen 4)
[18:25:31]
[18:25:31] Assembly optimizations on if available.
[18:25:31] Entering M.D.
[18:25:32] - Couldn't send HTTP request to server
[18:25:32] + Could not connect to Work Server (results)
[18:25:32] (171.64.65.111:8080)
[18:25:32] + Retrying using alternative port
[18:25:32] Connecting to http://171.64.65.111:80/
[18:25:34] - Couldn't send HTTP request to server
[18:25:34] + Could not connect to Work Server (results)
[18:25:34] (171.64.65.111:80)
[18:25:34] - Error: Could not transmit unit 04 (completed August 10) to work server.
[18:25:34] - 26 failed uploads of this unit.
[18:25:34] - Read packet limit of 540015616... Set to 524286976.
[18:25:34] + Attempting to send results [August 13 18:25:34 UTC]
[18:25:34] - Reading file work/wuresults_04.dat from core
[18:25:34] (Read 4786865 bytes from disk)
[18:25:34] Connecting to http://171.67.108.17:8080/
[18:25:37] - Couldn't send HTTP request to server
[18:25:37] + Could not connect to Work Server (results)
[18:25:37] (171.67.108.17:8080)
[18:25:37] + Retrying using alternative port
[18:25:37] Connecting to http://171.67.108.17:80/
[18:25:44] - Couldn't send HTTP request to server
[18:25:44] + Could not connect to Work Server (results)
[18:25:44] (171.67.108.17:80)
[18:25:44] Could not transmit unit 04 to Collection server; keeping in queue.
[18:25:44] Project: 6303 (Run 379, Clone 7, Gen 3)
[18:25:44] + Attempting to send results [August 13 18:25:44 UTC]
[18:25:44] - Reading file work/wuresults_05.dat from core
[18:25:44] (Read 4874612 bytes from disk)
[18:25:44] Connecting to http://171.64.65.111:8080/
[18:25:46] - Couldn't send HTTP request to server
[18:25:46] + Could not connect to Work Server (results)
[18:25:46] (171.64.65.111:8080)
[18:25:46] + Retrying using alternative port
[18:25:46] Connecting to http://171.64.65.111:80/
[18:25:48] - Couldn't send HTTP request to server
[18:25:48] + Could not connect to Work Server (results)
[18:25:48] (171.64.65.111:80)
[18:25:48] - Error: Could not transmit unit 05 (completed August 12) to work server.
[18:25:48] - 11 failed uploads of this unit.
[18:25:48] + Attempting to send results [August 13 18:25:48 UTC]
[18:25:48] - Reading file work/wuresults_05.dat from core
[18:25:48] (Read 4874612 bytes from disk)
[18:25:48] Connecting to http://171.67.108.17:8080/
[18:25:51] (Starting from checkpoint)
[18:25:51] Protein: p6301_sh3_with_ALA_frags
[18:25:51]
[18:25:51] Writing local files
[18:25:52] Completed 430000 out of 500000 steps (86%)
[18:25:52] Extra SSE boost OK.
[18:25:57] - Couldn't send HTTP request to server
[18:25:57] + Could not connect to Work Server (results)
[18:25:57] (171.67.108.17:8080)
[18:25:57] + Retrying using alternative port
[18:25:57] Connecting to http://171.67.108.17:80/
[18:26:06] - Couldn't send HTTP request to server
[18:26:06] + Could not connect to Work Server (results)
[18:26:06] (171.67.108.17:80)
[18:26:06] Could not transmit unit 05 to Collection server; keeping in queue.
[18:26:06] + Sent 0 of 2 completed units to the server
[18:26:06] - Autosend completed
[18:31:31] Timered checkpoint triggered.
[18:37:31] Timered checkpoint triggered.
[18:37:42] Writing local files
[18:37:42] Completed 435000 out of 500000 steps (87%)
[18:43:31] Timered checkpoint triggered.
[18:49:31] Timered checkpoint triggered.
[18:49:44] Writing local files
[18:49:44] Completed 440000 out of 500000 steps (88%)
[18:55:31] Timered checkpoint triggered.
[19:01:31] Timered checkpoint triggered.
[19:02:02] Writing local files
[19:02:02] Completed 445000 out of 500000 steps (89%)
[19:07:31] Timered checkpoint triggered.
[19:13:31] Timered checkpoint triggered.
[19:14:24] Writing local files
[19:14:24] Completed 450000 out of 500000 steps (90%)
[19:19:31] Timered checkpoint triggered.
[19:25:31] Timered checkpoint triggered.
[19:26:41] Writing local files
[19:26:41] Completed 455000 out of 500000 steps (91%)
[19:32:40] Timered checkpoint triggered.
[19:38:40] Timered checkpoint triggered.
[19:39:02] Writing local files
[19:39:02] Completed 460000 out of 500000 steps (92%)
[19:44:40] Timered checkpoint triggered.
[19:50:40] Timered checkpoint triggered.
[19:51:19] Writing local files
[19:51:19] Completed 465000 out of 500000 steps (93%)
[19:56:40] Timered checkpoint triggered.
[19:57:11] ***** Got a SIGTERM signal (2)
[19:57:11] Killing all core threads
Folding@Home Client Shutdown.
--- Opening Log file [August 13 20:06:43 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.23
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Sam\AppData\Roaming\Folding@home-x86
Arguments: -verbosity 9
[20:06:43] - Ask before connecting: No
[20:06:43] - User name: Soumitra (Team 69411)
[20:06:43] - User ID: 517E45FD054303B8
[20:06:43] - Machine ID: 1
[20:06:43]
[20:06:43] Loaded queue successfully.
[20:06:43] Initialization complete
[20:06:43]
[20:06:43] + Processing work unit
[20:06:43] - Autosending finished units... [August 13 20:06:43 UTC]
[20:06:43] Trying to send all finished work units
[20:06:43] Project: 6303 (Run 59, Clone 4, Gen 13)
[20:06:43] - Read packet limit of 540015616... Set to 524286976.
[20:06:43] + Attempting to send results [August 13 20:06:43 UTC]
[20:06:43] Core required: FahCore_78.exe
[20:06:43] Core found.
[20:06:43] - Reading file work/wuresults_04.dat from core
[20:06:43] (Read 4786865 bytes from disk)
[20:06:43] Connecting to http://171.64.65.111:8080/
[20:06:43] Working on queue slot 06 [August 13 20:06:43 UTC]
[20:06:43] + Working ...
[20:06:43] - Calling '.\FahCore_78.exe -dir work/ -suffix 06 -nocpulock -checkpoint 5 -verbose -lifeline 5696 -version 623'
[20:06:43]
[20:06:43] *------------------------------*
[20:06:43] Folding@Home Gromacs Core
[20:06:43] Version 1.90 (March 8, 2006)
[20:06:43]
[20:06:43] Preparing to commence simulation
[20:06:43] - Looking at optimizations...
[20:06:43] - Files status OK
[20:06:43] - Expanded 457032 -> 2243997 (decompressed 490.9 percent)
[20:06:43]
[20:06:43] Project: 6301 (Run 151, Clone 8, Gen 4)
[20:06:43]
[20:06:43] Assembly optimizations on if available.
[20:06:43] Entering M.D.
[20:06:45] - Couldn't send HTTP request to server
[20:06:45] + Could not connect to Work Server (results)
[20:06:45] (171.64.65.111:8080)
[20:06:45] + Retrying using alternative port
[20:06:45] Connecting to http://171.64.65.111:80/
[20:06:47] - Couldn't send HTTP request to server
[20:06:47] + Could not connect to Work Server (results)
[20:06:47] (171.64.65.111:80)
[20:06:47] - Error: Could not transmit unit 04 (completed August 10) to work server.
[20:06:47] - 27 failed uploads of this unit.
[20:06:47] - Read packet limit of 540015616... Set to 524286976.
[20:06:47] + Attempting to send results [August 13 20:06:47 UTC]
[20:06:47] - Reading file work/wuresults_04.dat from core
[20:06:47] (Read 4786865 bytes from disk)
[20:06:47] Connecting to http://171.67.108.17:8080/
[20:06:48] - Couldn't send HTTP request to server
[20:06:48] + Could not connect to Work Server (results)
[20:06:48] (171.67.108.17:8080)
[20:06:48] + Retrying using alternative port
[20:06:48] Connecting to http://171.67.108.17:80/
[20:06:56] - Couldn't send HTTP request to server
[20:06:56] + Could not connect to Work Server (results)
[20:06:56] (171.67.108.17:80)
[20:06:56] Could not transmit unit 04 to Collection server; keeping in queue.
[20:06:56] Project: 6303 (Run 379, Clone 7, Gen 3)
[20:06:56] + Attempting to send results [August 13 20:06:56 UTC]
[20:06:56] - Reading file work/wuresults_05.dat from core
[20:06:56] (Read 4874612 bytes from disk)
[20:06:56] Connecting to http://171.64.65.111:8080/
[20:06:58] - Couldn't send HTTP request to server
[20:06:58] + Could not connect to Work Server (results)
[20:06:58] (171.64.65.111:8080)
[20:06:58] + Retrying using alternative port
[20:06:58] Connecting to http://171.64.65.111:80/
[20:07:00] - Couldn't send HTTP request to server
[20:07:00] + Could not connect to Work Server (results)
[20:07:00] (171.64.65.111:80)
[20:07:00] - Error: Could not transmit unit 05 (completed August 12) to work server.
[20:07:00] - 12 failed uploads of this unit.
[20:07:00] + Attempting to send results [August 13 20:07:00 UTC]
[20:07:00] - Reading file work/wuresults_05.dat from core
[20:07:00] (Read 4874612 bytes from disk)
[20:07:00] Connecting to http://171.67.108.17:8080/
[20:07:03] (Starting from checkpoint)
[20:07:03] Protein: p6301_sh3_with_ALA_frags
[20:07:03]
[20:07:03] Writing local files
[20:07:03] Completed 467207 out of 500000 steps (93%)
[20:07:03] Extra SSE boost OK.
[20:07:09] - Couldn't send HTTP request to server
[20:07:09] + Could not connect to Work Server (results)
[20:07:09] (171.67.108.17:8080)
[20:07:09] + Retrying using alternative port
[20:07:09] Connecting to http://171.67.108.17:80/
[20:07:17] - Couldn't send HTTP request to server
[20:07:17] + Could not connect to Work Server (results)
[20:07:17] (171.67.108.17:80)
[20:07:17] Could not transmit unit 05 to Collection server; keeping in queue.
[20:07:17] + Sent 0 of 2 completed units to the server
[20:07:17] - Autosend completed
Thanks for the quick reply
Intel Core 2 Duo E6550 @ 2.33GHz
2 GB RAM
nVidia Geforce GTX 275 796MB
nVidia nForce 650i Ultra
Folding for guru3d (Team #69411)
2 GB RAM
nVidia Geforce GTX 275 796MB
nVidia nForce 650i Ultra
Folding for guru3d (Team #69411)
Re: 171.64.65.111
I've contacted the Pande Group about this server.
Posting FAH's log:
How to provide enough info to get helpful support.
How to provide enough info to get helpful support.
-
COOLDUDEGAMER
- Posts: 38
- Joined: Wed Jan 28, 2009 11:01 pm
- Hardware configuration: Folding Systems -
System 1 - Intel Xeon X3360, 8 GB A-Tech DDR2 800, Intel DG33FB, NVIDIA GeForce GTX 660 1.5 GB, 650 Watt EVGA PSU, Western Digital 80 GB ATA hard drive - Location: Dracut, MA, USA ; Kingston, NH, USA
Re: 171.64.65.111
I cannot send in a WU to server 171.64.65.111 either. The status is at 'reject'.
Thanks for contacting Pande Group, Bruce.
Thanks for contacting Pande Group, Bruce.
Why am I always tired?!
-
Soumitra
- Posts: 7
- Joined: Tue Feb 10, 2009 10:33 pm
- Hardware configuration: Processor - Intel Core 2 Duo E6550 @ 2.33GHz
Ram - 2 x 1GB DDR2
Motherboard - XFX nVidia 650i Ultra
Graphics Card - nVidia GeForce GTX275 796 MB
HDD - Seagate Barracuda 500GB @ 7400rpm
OS - Windows Vista Home Premium - Location: India
Re: 171.64.65.111
This server is now in Accept mode but its CPU load is very high at 6.02 and net load is also around 200
Server 171.67.108.17 also has a high net load of 252
I think that is why WUs are not uploading. I have stopped my client so that it doesn't contribute to high net load of both servers.
@ Bruce
Thank You for contacting Pande Group.
Server 171.67.108.17 also has a high net load of 252
I think that is why WUs are not uploading. I have stopped my client so that it doesn't contribute to high net load of both servers.
@ Bruce
Thank You for contacting Pande Group.
Intel Core 2 Duo E6550 @ 2.33GHz
2 GB RAM
nVidia Geforce GTX 275 796MB
nVidia nForce 650i Ultra
Folding for guru3d (Team #69411)
2 GB RAM
nVidia Geforce GTX 275 796MB
nVidia nForce 650i Ultra
Folding for guru3d (Team #69411)
-
Soumitra
- Posts: 7
- Joined: Tue Feb 10, 2009 10:33 pm
- Hardware configuration: Processor - Intel Core 2 Duo E6550 @ 2.33GHz
Ram - 2 x 1GB DDR2
Motherboard - XFX nVidia 650i Ultra
Graphics Card - nVidia GeForce GTX275 796 MB
HDD - Seagate Barracuda 500GB @ 7400rpm
OS - Windows Vista Home Premium - Location: India
Re: 171.64.65.111
I've succesfully uploaded all my pending WUs. It is really admirable that you people are managing such a big project and yet solving out problems so quickly.
Thanks to Bruce and Pande Group.
Happy Folding
Thanks to Bruce and Pande Group.
Happy Folding
Intel Core 2 Duo E6550 @ 2.33GHz
2 GB RAM
nVidia Geforce GTX 275 796MB
nVidia nForce 650i Ultra
Folding for guru3d (Team #69411)
2 GB RAM
nVidia Geforce GTX 275 796MB
nVidia nForce 650i Ultra
Folding for guru3d (Team #69411)
-
codysluder
- Posts: 1024
- Joined: Sun Dec 02, 2007 12:43 pm
Re: 171.64.65.111
I'm still having difficulties.
-
Soumitra
- Posts: 7
- Joined: Tue Feb 10, 2009 10:33 pm
- Hardware configuration: Processor - Intel Core 2 Duo E6550 @ 2.33GHz
Ram - 2 x 1GB DDR2
Motherboard - XFX nVidia 650i Ultra
Graphics Card - nVidia GeForce GTX275 796 MB
HDD - Seagate Barracuda 500GB @ 7400rpm
OS - Windows Vista Home Premium - Location: India
Re: 171.64.65.111
codysluder wrote:I'm still having difficulties.
You should try to upload when netload and CPU load of server is low
You can check that here
http://fah-web.stanford.edu/serverstat.html
That's all I did, as I am writing this CPU load and netload are 1.34 and 194, which is normal. netload above 250 and CPU load above 3-4 is high.
May be you have uploaded your WUs by now. All the best
Intel Core 2 Duo E6550 @ 2.33GHz
2 GB RAM
nVidia Geforce GTX 275 796MB
nVidia nForce 650i Ultra
Folding for guru3d (Team #69411)
2 GB RAM
nVidia Geforce GTX 275 796MB
nVidia nForce 650i Ultra
Folding for guru3d (Team #69411)
Cannot transmit to 171.64.65.111
It seems to be in reject status. Note that 171.67.108.17 seems to be involved, at least indirectly.
Code: Select all
03:01:27] Finished Work Unit:
[03:01:31] - Reading up to 362784 from "work/wudata_03.arc": Read 362784
[03:01:31] - Reading up to 3564620 from "work/wudata_03.xtc": Read 3564620
[03:01:37] goefile size: 0
[03:01:37] logfile size: 918838
[03:01:38] Leaving Run
[03:01:41] - Writing 6610534 bytes of core data to disk...
[03:01:53] Done: 6610022 -> 4802820 (compressed to 72.6 percent)
[03:01:57] ... Done.
[03:01:59] - Shutting down core
[03:01:59]
[03:01:59] Folding@home Core Shutdown: FINISHED_UNIT
[03:02:04] CoreStatus = 64 (100)
[03:02:04] Sending work to server
[03:02:04] Project: 6307 (Run 438, Clone 4, Gen 1)
[03:02:05] + Attempting to send results [September 30 03:02:05 UTC]
[03:02:08] - Couldn't send HTTP request to server
[03:02:08] + Could not connect to Work Server (results)
[03:02:08] (171.64.65.111:8080)
[03:02:08] + Retrying using alternative port
[03:02:11] - Couldn't send HTTP request to server
[03:02:11] + Could not connect to Work Server (results)
[03:02:11] (171.64.65.111:80)
[03:02:11] - Error: Could not transmit unit 03 (completed September 30) to work server.
[03:02:11] Keeping unit 03 in queue.
[03:02:11] Project: 6307 (Run 438, Clone 4, Gen 1)
[03:02:11] + Attempting to send results [September 30 03:02:11 UTC]
[03:02:12] - Couldn't send HTTP request to server
[03:02:12] + Could not connect to Work Server (results)
[03:02:12] (171.64.65.111:8080)
[03:02:12] + Retrying using alternative port
[03:02:14] - Couldn't send HTTP request to server
[03:02:14] + Could not connect to Work Server (results)
[03:02:14] (171.64.65.111:80)
[03:02:14] - Error: Could not transmit unit 03 (completed September 30) to work server.
[03:02:14] + Attempting to send results [September 30 03:02:14 UTC]
[03:02:15] - Couldn't send HTTP request to server
[03:02:15] + Could not connect to Work Server (results)
[03:02:15] (171.67.108.17:8080)
[03:02:15] + Retrying using alternative port
[03:02:16] - Couldn't send HTTP request to server
[03:02:16] + Could not connect to Work Server (results)
[03:02:16] (171.67.108.17:80)
[03:02:16] Could not transmit unit 03 to Collection server; keeping in queue.
[03:02:16] - Preparing to get new work unit...
[03:02:16] + Attempting to get work packet
[03:02:16] - Connecting to assignment server
[03:02:18] - Successful: assigned to (171.67.108.13).
[03:02:18] + News From Folding@Home: Welcome to Folding@Home
[03:02:18] Loaded queue successfully.
[03:02:23] Project: 6307 (Run 438, Clone 4, Gen 1)
[03:02:23] + Attempting to send results [September 30 03:02:23 UTC]
[03:02:24] - Couldn't send HTTP request to server
[03:02:24] + Could not connect to Work Server (results)
[03:02:24] (171.64.65.111:8080)
[03:02:24] + Retrying using alternative port
[03:02:25] - Couldn't send HTTP request to server
[03:02:25] + Could not connect to Work Server (results)
[03:02:25] (171.64.65.111:80)
[03:02:25] - Error: Could not transmit unit 03 (completed September 30) to work server.
[03:02:25] + Attempting to send results [September 30 03:02:25 UTC]
[03:05:35] - Couldn't send HTTP request to server
[03:05:35] + Could not connect to Work Server (results)
[03:05:35] (171.67.108.17:8080)
[03:05:35] + Retrying using alternative port
[03:08:44] - Couldn't send HTTP request to server
[03:08:44] + Could not connect to Work Server (results)
[03:08:44] (171.67.108.17:80)
[03:08:44] Could not transmit unit 03 to Collection server; keeping in queue.
[03:08:44] + Closed connections
[03:08:44]
[03:08:44] + Processing work unit
[03:08:44] Core required: FahCore_78.exe
[03:08:44] Core found.
[03:08:44] Working on queue slot 04 [September 30 03:08:44 UTC]
[03:08:44] + Working ...
[03:08:46]
[03:08:46] *------------------------------*
[03:08:46] Folding@Home Gromacs Core
[03:08:46] Version 1.90 (March 8, 2006)
[03:08:46]
[03:08:46] Preparing to commence simulation
[03:08:46] - Looking at optimizations...
[03:08:46] - Created dyn
[03:08:46] - Files status OK
[03:08:46] - Expanded 238679 -> 1167721 (decompressed 489.2 percent)
[03:08:46] - Starting from initial work packet
[03:08:46]
[03:08:46] Project: 4440 (Run 884, Clone 2, Gen 37)
[03:08:46]
[03:08:46] Assembly optimizations on if available.
[03:08:46] Entering M.D.
[03:08:52] Protein: p4440_Seq42_Amber03
[03:08:52]
[03:08:52] Writing local files
[03:10:22] Extra 3DNow boost OK.
[03:10:22] Writing local files
[03:10:22] Completed 0 out of 1500000 steps (0%)
[04:14:14] Writing local files
[04:14:16] Completed 15000 out of 1500000 steps (1%)
[05:16:59] Writing local files
[05:16:59] Completed 30000 out of 1500000 steps (2%)
[06:20:29] Writing local files
[06:20:29] Completed 45000 out of 1500000 steps (3%)
[07:23:30] Writing local files
[07:23:30] Completed 60000 out of 1500000 steps (4%)
[08:26:23] Writing local files
[08:26:23] Completed 75000 out of 1500000 steps (5%)
[08:59:43] Project: 6307 (Run 438, Clone 4, Gen 1)
[08:59:43] + Attempting to send results [September 30 08:59:43 UTC]
[08:59:45] - Couldn't send HTTP request to server
[08:59:45] + Could not connect to Work Server (results)
[08:59:45] (171.64.65.111:8080)
[08:59:45] + Retrying using alternative port
[08:59:46] - Couldn't send HTTP request to server
[08:59:46] + Could not connect to Work Server (results)
[08:59:46] (171.64.65.111:80)
[08:59:46] - Error: Could not transmit unit 03 (completed September 30) to work server.
[08:59:46] + Attempting to send results [September 30 08:59:46 UTC]
[09:02:55] - Couldn't send HTTP request to server
[09:02:55] + Could not connect to Work Server (results)
[09:02:55] (171.67.108.17:8080)
[09:02:55] + Retrying using alternative port
[09:06:05] - Couldn't send HTTP request to server
[09:06:05] + Could not connect to Work Server (results)
[09:06:05] (171.67.108.17:80)
[09:06:05] Could not transmit unit 03 to Collection server; keeping in queue.
[09:06:05] + Working...
[09:29:27] Writing local files
[09:29:27] Completed 90000 out of 1500000 steps (6%)
[10:32:15] Writing local files
[10:32:15] Completed 105000 out of 1500000 steps (7%)
[11:35:11] Writing local files
[11:35:11] Completed 120000 out of 1500000 steps (8%)
[12:37:58] Writing local files
[12:37:58] Completed 135000 out of 1500000 steps (9%)
[13:40:53] Writing local files
[13:40:53] Completed 150000 out of 1500000 steps (10%)
[14:43:46] Writing local files
[14:43:47] Completed 165000 out of 1500000 steps (11%)
[15:06:05] Project: 6307 (Run 438, Clone 4, Gen 1)
[15:06:05] + Attempting to send results [September 30 15:06:05 UTC]
[15:06:07] - Couldn't send HTTP request to server
[15:06:07] + Could not connect to Work Server (results)
[15:06:07] (171.64.65.111:8080)
[15:06:07] + Retrying using alternative port
[15:06:08] - Couldn't send HTTP request to server
[15:06:08] + Could not connect to Work Server (results)
[15:06:08] (171.64.65.111:80)
[15:06:08] - Error: Could not transmit unit 03 (completed September 30) to work server.
[15:06:08] + Attempting to send results [September 30 15:06:08 UTC]
[15:09:17] - Couldn't send HTTP request to server
[15:09:17] + Could not connect to Work Server (results)
[15:09:17] (171.67.108.17:8080)
[15:09:17] + Retrying using alternative port
[15:12:26] - Couldn't send HTTP request to server
[15:12:26] + Could not connect to Work Server (results)
[15:12:26] (171.67.108.17:80)
[15:12:26] Could not transmit unit 03 to Collection server; keeping in queue.
[15:12:26] + Working...
========
DrBB1
DrBB1
Re: Cannot transmit to 171.64.65.111
Server status on connection has indicated "Reject" mode for the past few hours. Can't upload.
========
DrBB1
DrBB1
Re: Cannot transmit to 171.64.65.111
I have had 11 failed attempts with this same server.
The bad part is out of 10 Queue slots, 4 of mine have had Could not Transmit errors for the past week on 4 separate servers. Is this normal? I am new so I have nothing to base it on.
Code: Select all
[17:52:53] + Attempting to send results [October 16 17:52:53 UTC]
[17:52:53] - Reading file work/wuresults_00.dat from core
[17:52:53] (Read 4722331 bytes from disk)
[17:52:53] Connecting to http://171.64.65.111:8080/
[17:52:54] - Couldn't send HTTP request to server
[17:52:54] + Could not connect to Work Server (results)
[17:52:54] (171.64.65.111:8080)
[17:52:54] + Retrying using alternative port
[17:52:54] Connecting to http://171.64.65.111:80/
[17:52:55] - Couldn't send HTTP request to server
[17:52:55] + Could not connect to Work Server (results)
[17:52:55] (171.64.65.111:80)
[17:52:55] - Error: Could not transmit unit 00 (completed October 15) to work server.
[17:52:55] - 11 failed uploads of this unit.
[17:52:55] + Attempting to send results [October 16 17:52:55 UTC]
[17:52:55] - Reading file work/wuresults_00.dat from core
[17:52:55] (Read 4722331 bytes from disk)
[17:52:55] Connecting to http://171.67.108.17:8080/
[17:52:56] - Couldn't send HTTP request to server
[17:52:56] + Could not connect to Work Server (results)
[17:52:56] (171.67.108.17:8080)
[17:52:56] + Retrying using alternative port
[17:52:56] Connecting to http://171.67.108.17:80/
[17:52:56] - Couldn't send HTTP request to server
[17:52:56] + Could not connect to Work Server (results)
[17:52:56] (171.67.108.17:80)
[17:52:56] Could not transmit unit 00 to Collection server; keeping in queue.
[17:52:56] Project: 6301 (Run 176, Clone 6, Gen 8)-
John Naylor
- Posts: 357
- Joined: Mon Dec 03, 2007 4:36 pm
- Hardware configuration: Q9450 OC @ 3.2GHz (Win7 Home Premium) - SMP2
E7500 OC @ 3.66GHz (Windows Home Server) - SMP2
i5-3750k @ 3.8GHz (Win7 Pro) - SMP2 - Location: University of Birmingham, UK
Re: Cannot transmit to 171.64.65.111
This is an unusually high level of failures 
The servers are having trouble at the moment due to insufficient storage (see the "News" link at the top of this forum), but more storage servers are on the way, at which point these issues should become much less common.
The servers are having trouble at the moment due to insufficient storage (see the "News" link at the top of this forum), but more storage servers are on the way, at which point these issues should become much less common.Folding whatever I'm sent since March 2006 Beta testing since October 2006. www.FAH-Addict.net Administrator since August 2009.
Beta testing since October 2006. www.FAH-Addict.net Administrator since August 2009.