Page 1 of 1
5101 run 0 Clone 149 Gen 57 { 2 Million steps?}
Posted: Thu Jan 29, 2009 4:31 pm
by dschief
This is taking 31 min per % ; Is it ok? It's worth 2165 points! The dead -line is 5 days, so it looks like it will finish under the wire.
Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}
Posted: Thu Jan 29, 2009 5:25 pm
by ChasR
It's a normal p5101.
Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}
Posted: Thu Jan 29, 2009 7:34 pm
by dschief
It seems to be way under pointed, by comparison,the 1920 point wu's I can finish in less than a day. this one "should"
be worth close to 4,000
Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}
Posted: Thu Jan 29, 2009 7:35 pm
by 7im
On what kind of hardware?
Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}
Posted: Thu Jan 29, 2009 7:55 pm
by dschief
C2D 6400 2.4 Ghz. 2 gig ram; normal wu's usually take 12 1/2 to 13 min per %; This 5101 is taking over 30 min per %
any rate the point boost is only 12.76 % while processing time is double. The minimum value should be 3840
Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}
Posted: Thu Jan 29, 2009 8:01 pm
by toTOW
It's an A1 WU ... not an A2. That's why it's so slow.
Re: 5101 run 0 Clone 149 Gen 57 { 2 Million steps?}
Posted: Thu Jan 29, 2009 8:12 pm
by dschief
Just checked, Have 3 { 5102's } running in addition to the 5101, this is really going to kick the snot out of my PPD