Page 1 of 1
171 67 108 17 No uploads going thru
Posted: Wed Dec 24, 2008 1:09 pm
by new08
This server is shown connected but never seems to accept my results on port 80 or 8080.
I can get ' OK ' from 171 67 108 20 as a page- as that is an older problem server posted here- so shows no connectivity probs from my end.
When I put in 171 67 108 17 I just get a blank page from boths ports.
I've been losing a lot of units lately and they go out of date in the end!
Nothing shows up on the this server forum -so is it a new issue??
Re: 171 67 108 17 No uploads going thru
Posted: Wed Dec 24, 2008 5:22 pm
by codysluder
Which client are you using?
Please post FahLog.txt
Re: 171 67 108 17 No uploads going thru
Posted: Fri Dec 26, 2008 12:11 pm
by new08
Client 6.20
File follows. (Shortened ver)
Note that Unit 4 ran out of time and Unit 5 has defaulted back to the original upload server -still waiting to go !
Also note I've stopped this client for now and gone back to 5.03 running OK as machine 1.
>>>>>>>
Code: Select all
--- Opening Log file [December 15 05:42:43 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: D:\Program Files\Folding@home\Folding@home-x86
[05:42:43] - Ask before connecting: No
[05:42:43] - User name: new08 (Team 39340)
[05:42:43] - User ID: 1B61FAF6603D2F23
[05:42:43] - Machine ID: 2
[05:42:43]
[05:42:43] Loaded queue successfully.
[05:42:43] Initialization complete
[05:42:43]
[05:42:43] + Processing work unit
[05:42:43] Core required: FahCore_81.exe
[05:42:43] Core found.
[05:42:43] Project: 896 (Run 11, Clone 458, Gen 44)
[05:42:43] + Attempting to send results [December 15 05:42:43 UTC]
[05:42:43] Working on queue slot 05 [December 15 05:42:43 UTC]
[05:42:43] + Working ...
[05:42:43]
[05:42:43] *------------------------------*
[05:42:43] Folding@Home Gromacs Simulated Tempering Core
[05:42:43] Version 1.10 (Oct 4, 2007)
[05:42:43]
[05:42:43] Preparing to commence simulation
[05:42:43] - Looking at optimizations...
[05:42:43] - Files status OK
[05:42:43] - Couldn't send HTTP request to server
[05:42:43] + Could not connect to Work Server (results)
[05:42:43] (130.49.240.81:8080)
[05:42:43] + Retrying using alternative port
[05:42:43] - Couldn't send HTTP request to server
[05:42:43] + Could not connect to Work Server (results)
[05:42:43] (130.49.240.81:80)
[05:42:43] - Error: Could not transmit unit 04 (completed December 1) to work server.
[05:42:43] + Attempting to send results [December 15 05:42:43 UTC]
[05:42:43] - Couldn't send HTTP request to server
[05:42:43] + Could not connect to Work Server (results)
[05:42:43] (130.49.240.77:8080)
[05:42:43] + Retrying using alternative port
[05:42:44] - Couldn't send HTTP request to server
[05:42:44] + Could not connect to Work Server (results)
[05:42:44] (130.49.240.77:80)
[05:42:44] Could not transmit unit 04 to Collection server; keeping in queue.
[05:42:45] - Expanded 438230 -> 2160354 (decompressed 492.9 percent)
[05:42:46]
[05:42:46] Project: 4110 (Run 23, Clone 19, Gen 31)
[05:42:46]
[05:42:46] Assembly optimizations on if available.
[05:42:46] Entering M.D.
[05:43:07] (Starting from checkpoint)
[05:43:08] Protein: p4110_ntl9_folded_Amber03_Native
[05:43:08]
[05:43:08] Writing local files
[05:43:08] Completed 825000 out of 1500000 steps (55%)
[05:43:09] Extra SSE boost OK.
Folding@Home Client Shutdown.
--- Opening Log file [December 15 05:59:51 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: D:\Program Files\Folding@home\Folding@home-x86
[05:59:51] - Ask before connecting: No
[05:59:51] - User name: new08 (Team 39340)
[05:59:51] - User ID: 1B61FAF6603D2F23
[05:59:51] - Machine ID: 2
[05:59:51]
[05:59:51] Loaded queue successfully.
[05:59:51] Initialization complete
[05:59:51]
[05:59:51] + Processing work unit
[05:59:51] Core required: FahCore_81.exe
[05:59:51] Core found.
[05:59:51] Project: 896 (Run 11, Clone 458, Gen 44)
[05:59:51] + Attempting to send results [December 15 05:59:51 UTC]
[05:59:51] Working on queue slot 05 [December 15 05:59:51 UTC]
[05:59:51] + Working ...
[05:59:52] - Couldn't send HTTP request to server
[05:59:52] + Could not connect to Work Server (results)
[05:59:52] (130.49.240.81:8080)
[05:59:52] + Retrying using alternative port
[05:59:52] - Couldn't send HTTP request to server
[05:59:52] + Could not connect to Work Server (results)
[05:59:52] (130.49.240.81:80)
[05:59:52] - Error: Could not transmit unit 04 (completed December 1) to work server.
[05:59:52] + Attempting to send results [December 15 05:59:52 UTC]
[05:59:52] - Couldn't send HTTP request to server
[05:59:52] + Could not connect to Work Server (results)
[05:59:52] (130.49.240.77:8080)
[05:59:52] + Retrying using alternative port
[05:59:52] - Couldn't send HTTP request to server
[05:59:52] + Could not connect to Work Server (results)
[05:59:52] (130.49.240.77:80)
[05:59:52] Could not transmit unit 04 to Collection server; keeping in queue.
[05:59:52]
[05:59:52] *------------------------------*
[05:59:52] Folding@Home Gromacs Simulated Tempering Core
[05:59:52] Version 1.10 (Oct 4, 2007)
[05:59:52]
[05:59:52] Preparing to commence simulation
[05:59:52] - Looking at optimizations...
[05:59:52] - Files status OK
[05:59:55] - Expanded 438230 -> 2160354 (decompressed 492.9 percent)
[05:59:56]
[05:59:56] Project: 4110 (Run 23, Clone 19, Gen 31)
[05:59:56]
[05:59:56] Assembly optimizations on if available.
[05:59:56] Entering M.D.
[06:00:17] (Starting from checkpoint)
[06:00:17] Protein: p4110_ntl9_folded_Amber03_Native
[06:00:17]
[06:00:17] Writing local files
[06:00:18] Completed 825000 out of 1500000 steps (55%)
[06:00:18] Extra SSE boost OK.
Folding@Home Client Shutdown.
--- Opening Log file [December 17 14:05:31 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: D:\Program Files\Folding@home\Folding@home-x86
[14:05:31] - Ask before connecting: No
[14:05:31] - User name: new08 (Team 39340)
[14:05:31] - User ID: 1B61FAF6603D2F23
[14:05:31] - Machine ID: 2
[14:05:31]
[14:05:31] Loaded queue successfully.
[14:05:32] Initialization complete
[14:05:32] Unit 4's deadline (December 17 12:06) has passed.
[14:05:36]
[14:05:36] + Processing work unit
[14:05:36] Core required: FahCore_81.exe
[14:05:36] Core found.
[14:05:36] Working on queue slot 05 [December 17 14:05:36 UTC]
[14:05:36] + Working ...
[14:05:38]
[14:05:38] *------------------------------*
[14:05:38] Folding@Home Gromacs Simulated Tempering Core
[14:05:38] Version 1.10 (Oct 4, 2007)
[14:05:38]
[14:05:38] Preparing to commence simulation
[14:05:38] - Looking at optimizations...
[14:05:38] - Files status OK
[14:05:40] - Expanded 438230 -> 2160354 (decompressed 492.9 percent)
[14:05:41]
[14:05:41] Project: 4110 (Run 23, Clone 19, Gen 31)
[14:05:41]
[14:05:41] Assembly optimizations on if available.
[14:05:41] Entering M.D.
[14:06:03] (Starting from checkpoint)
[14:06:03] Protein: p4110_ntl9_folded_Amber03_Native
[14:06:03]
[14:06:03] Writing local files
[14:06:03] Completed 825000 out of 1500000 steps (55%)
[14:06:04] Extra SSE boost OK.
[16:33:42] Writing local files
[16:33:43] Completed 840000 out of 1500000 steps (56%)
[19:04:45] Writing local files
[>>>>>> foreshortened by owner....
[09:02:36] Completed 1380000 out of 1500000 steps (92%)
[11:29:54] Writing local files
[11:29:54] Completed 1395000 out of 1500000 steps (93%)
[13:57:09] Writing local files
[13:57:09] Completed 1410000 out of 1500000 steps (94%)
[14:08:44] + Working...
[16:24:31] Writing local files
[16:24:31] Completed 1425000 out of 1500000 steps (95%)
[18:51:59] Writing local files
[18:52:00] Completed 1440000 out of 1500000 steps (96%)
[20:08:44] + Working...
[21:19:26] Writing local files
[21:19:26] Completed 1455000 out of 1500000 steps (97%)
[23:46:50] Writing local files
[23:46:50] Completed 1470000 out of 1500000 steps (98%)
[02:08:44] + Working...
[02:14:10] Writing local files
[02:14:10] Completed 1485000 out of 1500000 steps (99%)
[04:41:30] Writing local files
[04:41:30] Completed 1500000 out of 1500000 steps (100%)
[04:41:31] Writing final coordinates.
[04:41:33] Past main M.D. loop
[04:42:33]
[04:42:33] Finished Work Unit:
[04:42:34] - Reading up to 356664 from "work/wudata_05.arc": Read 356664
[04:42:34] - Reading up to 3904168 from "work/wudata_05.xtc": Read 3904168
[04:42:35] goefile size: 0
[04:42:35] logfile size: 285025
[04:42:35] Leaving Run
[04:42:36] - Writing 5219024 bytes of core data to disk...
[04:42:54] Done: 5218512 -> 4234974 (compressed to 81.1 percent)
[04:42:55] ... Done.
[04:42:55] - Shutting down core
[04:42:55]
[04:42:55] Folding@home Core Shutdown: FINISHED_UNIT
[04:42:59] CoreStatus = 64 (100)
[04:42:59] Sending work to server
[04:42:59] Project: 4110 (Run 23, Clone 19, Gen 31)
[04:42:59] + Attempting to send results [December 22 04:42:59 UTC]
[04:42:59] - Couldn't send HTTP request to server
[04:42:59] + Could not connect to Work Server (results)
[04:42:59] (171.64.65.111:8080)
[04:42:59] + Retrying using alternative port
[04:42:59] - Couldn't send HTTP request to server
[04:42:59] + Could not connect to Work Server (results)
[04:42:59] (171.64.65.111:80)
[04:42:59] - Error: Could not transmit unit 05 (completed December 22) to work server.
[04:42:59] Keeping unit 05 in queue.
[04:42:59] Project: 4110 (Run 23, Clone 19, Gen 31)
[04:42:59] + Attempting to send results [December 22 04:42:59 UTC]
[04:42:59] - Couldn't send HTTP request to server
[04:42:59] + Could not connect to Work Server (results)
[04:42:59] (171.64.65.111:8080)
[04:42:59] + Retrying using alternative port
[04:42:59] - Couldn't send HTTP request to server
[04:42:59] + Could not connect to Work Server (results)
[04:42:59] (171.64.65.111:80)
[04:42:59] - Error: Could not transmit unit 05 (completed December 22) to work server.
[04:42:59] + Attempting to send results [December 22 04:42:59 UTC]
[04:42:59] - Couldn't send HTTP request to server
[04:42:59] + Could not connect to Work Server (results)
[04:42:59] (171.67.108.17:8080)
[04:42:59] + Retrying using alternative port
[04:42:59] - Couldn't send HTTP request to server
[04:42:59] + Could not connect to Work Server (results)
[04:42:59] (171.67.108.17:80)
[04:42:59] Could not transmit unit 05 to Collection server; keeping in queue.
[04:42:59] - Preparing to get new work unit...
[04:42:59] + Attempting to get work packet
[04:42:59] - Connecting to assignment server
[04:42:59] + Could not connect to Assignment Server
[04:42:59] + Could not connect to Assignment Server 2
[04:42:59] + Couldn't get work instructions.
[04:42:59] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
Waiting before retry.
[07:46:56] + Attempting to get work packet
[07:46:56] - Connecting to assignment server
[07:46:56] + Could not connect to Assignment Server
[07:46:56] + Could not connect to Assignment Server 2
[07:46:56] + Couldn't get work instructions.
[07:46:56] - Attempt #13 to get work failed, and no other work to do.
Waiting before retry.
[08:09:51] Project: 4110 (Run 23, Clone 19, Gen 31)
[08:09:51] + Attempting to send results [December 22 08:09:51 UTC]
[08:09:51] - Couldn't send HTTP request to server
[08:09:51] + Could not connect to Work Server (results)
[08:09:51] (171.64.65.111:8080)
[08:09:51] + Retrying using alternative port
[08:09:51] - Couldn't send HTTP request to server
[08:09:51] + Could not connect to Work Server (results)
[08:09:51] (171.64.65.111:80)
[08:09:51] - Error: Could not transmit unit 05 (completed December 22) to work server.
[08:09:51] + Attempting to send results [December 22 08:09:51 UTC]
[08:09:52] - Couldn't send HTTP request to server
[08:09:52] + Could not connect to Work Server (results)
[08:09:52] (171.67.108.17:8080)
[08:09:52] + Retrying using alternative port
[08:09:52] - Couldn't send HTTP request to server
[08:09:52] + Could not connect to Work Server (results)
[08:09:52] (171.67.108.17:80)
[08:09:52] Could not transmit unit 05 to Collection server; keeping in queue.
[08:35:02] + Attempting to get work packet
[08:35:02] - Connecting to assignment server
[08:35:02] + Could not connect to Assignment Server
[08:35:02] + Could not connect to Assignment Server 2
[08:35:02] + Couldn't get work instructions.
[08:35:02] - Attempt #14 to get work failed, and no other work to do.
>>>>>
Waiting before retry.
[12:35:51] + Attempting to get work packet
[12:35:51] - Connecting to assignment server
[12:35:51] + Could not connect to Assignment Server
[12:35:51] + Could not connect to Assignment Server 2
[12:35:51] + Couldn't get work instructions.
[12:35:51] - Attempt #19 to get work failed, and no other work to do.
Waiting before retry.
[13:24:02] + Attempting to get work packet
[13:24:02] - Connecting to assignment server
[13:24:02] + Could not connect to Assignment Server
[13:24:02] + Could not connect to Assignment Server 2
[13:24:02] + Couldn't get work instructions.
[13:24:02] - Attempt #20 to get work failed, and no other work to do.
Waiting before retry.
[14:09:53] Project: 4110 (Run 23, Clone 19, Gen 31)
[14:09:53] + Attempting to send results [December 22 14:09:53 UTC]
[14:09:53] - Couldn't send HTTP request to server
[14:09:53] + Could not connect to Work Server (results)
[14:09:53] (171.64.65.111:8080)
[14:09:53] + Retrying using alternative port
[14:09:53] - Couldn't send HTTP request to server
[14:09:53] + Could not connect to Work Server (results)
[14:09:53] (171.64.65.111:80)
[14:09:53] - Error: Could not transmit unit 05 (completed December 22) to work server.
[14:09:53] + Attempting to send results [December 22 14:09:53 UTC]
[14:09:53] - Couldn't send HTTP request to server
[14:09:53] + Could not connect to Work Server (results)
[14:09:53] (171.67.108.17:8080)
[14:09:53] + Retrying using alternative port
[14:09:53] - Couldn't send HTTP request to server
[14:09:53] + Could not connect to Work Server (results)
[14:09:53] (171.67.108.17:80)
[14:09:53] Could not transmit unit 05 to Collection server; keeping in queue.
[14:12:17] + Attempting to get work packet
>>>>>>>>
Waiting before retry.
[15:48:33] + Attempting to get work packet
[15:48:33] - Connecting to assignment server
[15:48:33] + Could not connect to Assignment Server
[15:48:33] + Could not connect to Assignment Server 2
[15:48:33] + Couldn't get work instructions.
[15:48:33] - Attempt #23 to get work failed, and no other work to do.
Waiting before retry.
[16:36:39] + Attempting to get work packet
[16:36:39] - Connecting to assignment server
[16:36:39] + Could not connect to Assignment Server
[16:36:39] + Could not connect to Assignment Server 2
[16:36:39] + Couldn't get work instructions.
[16:36:39] - Attempt #24 to get work failed, and no other work to do.
Waiting before retry.
[17:24:50] + Attempting to get work packet
[17:24:50] - Connecting to assignment server
[17:24:50] + Could not connect to Assignment Server
[17:24:50] + Could not connect to Assignment Server 2
[17:24:50] + Couldn't get work instructions.
[17:24:50] - Attempt #25 to get work failed, and no other work to do.
Waiting before retry.
Folding@Home Client Shutdown.
--- Opening Log file [December 22 17:56:39 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: D:\Program Files\Folding@home\Folding@home-x86
[17:56:39] - Ask before connecting: No
[17:56:39] - User name: new08 (Team 39340)
[17:56:39] - User ID: 1B61FAF6603D2F23
[17:56:39] - Machine ID: 2
[17:56:39]
[17:56:39] Loaded queue successfully.
[17:56:39] Deleting incompletely fetched item (4) from queue position #6
[17:56:39] Initialization complete
[17:56:39] - Preparing to get new work unit...
[17:56:39] + Attempting to get work packet
[17:56:39] Project: 4110 (Run 23, Clone 19, Gen 31)
[17:56:39] + Attempting to send results [December 22 17:56:39 UTC]
[17:56:39] - Connecting to assignment server
[17:56:39] - Couldn't send HTTP request to server
[17:56:39] + Could not connect to Work Server (results)
[17:56:39] (171.64.65.111:8080)
[17:56:39] + Retrying using alternative port
[17:56:40] - Couldn't send HTTP request to server
[17:56:40] + Could not connect to Work Server (results)
[17:56:40] (171.64.65.111:80)
[17:56:40] - Error: Could not transmit unit 05 (completed December 22) to work server.
[17:56:40] + Attempting to send results [December 22 17:56:40 UTC]
[17:56:40] - Couldn't send HTTP request to server
[17:56:40] + Could not connect to Work Server (results)
[17:56:40] (171.67.108.17:8080)
[17:56:40] + Retrying using alternative port
[17:56:40] - Successful: assigned to (171.67.108.20).
[17:56:40] + News From Folding@Home: Welcome to Folding@Home
[17:56:40] - Couldn't send HTTP request to server
[17:56:40] + Could not connect to Work Server (results)
[17:56:40] (171.67.108.17:80)
[17:56:40] Could not transmit unit 05 to Collection server; keeping in queue.
[17:56:40] Loaded queue successfully.
[17:56:44] + Closed connections
[17:56:44]
[17:56:44] + Processing work unit
[17:56:44] Core required: FahCore_78.exe
[17:56:44] Core not found.
[17:56:44] - Core is not present or corrupted.
[17:56:44] - Attempting to download new core...
[17:56:44] + Downloading new core: FahCore_78.exe
[17:56:45] + 10240 bytes downloaded
[17:56:45] + 20480 bytes downloaded
[17:56:45] + 30720 bytes downloaded
>>>>>>
[17:56:48] + 825633 bytes downloaded
[17:56:48] Verifying core Core_78.fah...
[17:56:48] Signature is VALID
[17:56:48]
[17:56:48] Trying to unzip core FahCore_78.exe
[17:56:50] Decompressed FahCore_78.exe (2338816 bytes) successfully
[17:57:06] + Core successfully engaged
[17:57:11]
[17:57:11] + Processing work unit
[17:57:11] Core required: FahCore_78.exe
[17:57:11] Core found.
[17:57:11] Working on queue slot 06 [December 22 17:57:11 UTC]
[17:57:11] + Working ...
[17:57:12]
[17:57:12] *------------------------------*
[17:57:12] Folding@Home Gromacs Core
[17:57:12] Version 1.90 (March 8, 2006)
[17:57:12]
[17:57:12] Preparing to commence simulation
[17:57:12] - Looking at optimizations...
[17:57:12] - Created dyn
[17:57:12] - Files status OK
[17:57:13] - Expanded 238198 -> 1168228 (decompressed 490.4 percent)
[17:57:13] - Starting from initial work packet
[17:57:13]
[17:57:13] Project: 4437 (Run 78, Clone 4, Gen 1)
[17:57:13]
[17:57:13] Assembly optimizations on if available.
[17:57:13] Entering M.D.
[17:57:20] Protein: p4437
[17:57:20]
[17:57:20] Writing local files
[17:58:52] Extra SSE boost OK.
[17:58:53] Writing local files
[17:58:53] Completed 0 out of 2500000 steps (0%)
Folding@Home Client Shutdown.
--- Opening Log file [December 22 18:27:16 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: D:\Program Files\Folding@home\Folding@home-x86
[18:27:16] - Ask before connecting: No
[18:27:16] - User name: new08 (Team 39340)
[18:27:16] - User ID: 1B61FAF6603D2F23
[18:27:16] - Machine ID: 2
[18:27:16]
[18:27:16] Loaded queue successfully.
[18:27:16] Initialization complete
[18:27:16]
[18:27:16] + Processing work unit
[18:27:16] Core required: FahCore_78.exe
[18:27:16] Core found.
[18:27:16] Project: 4110 (Run 23, Clone 19, Gen 31)
[18:27:16] + Attempting to send results [December 22 18:27:16 UTC]
[18:27:16] Working on queue slot 06 [December 22 18:27:16 UTC]
[18:27:16] + Working ...
[18:27:19] - Couldn't send HTTP request to server
[18:27:19] + Could not connect to Work Server (results)
[18:27:19] (171.64.65.111:8080)
[18:27:19] + Retrying using alternative port
[18:27:19] - Couldn't send HTTP request to server
[18:27:19] + Could not connect to Work Server (results)
[18:27:19] (171.64.65.111:80)
[18:27:19] - Error: Could not transmit unit 05 (completed December 22) to work server.
[18:27:19] + Attempting to send results [December 22 18:27:19 UTC]
[18:27:20]
[18:27:20] *------------------------------*
[18:27:20] Folding@Home Gromacs Core
[18:27:20] Version 1.90 (March 8, 2006)
[18:27:20]
[18:27:20] Preparing to commence simulation
[18:27:20] - Looking at optimizations...
[18:27:20] - Files status OK
[18:27:20] - Couldn't send HTTP request to server
[18:27:20] + Could not connect to Work Server (results)
[18:27:20] (171.67.108.17:8080)
[18:27:20] + Retrying using alternative port
[18:27:20] - Couldn't send HTTP request to server
[18:27:20] + Could not connect to Work Server (results)
[18:27:20] (171.67.108.17:80)
[18:27:20] Could not transmit unit 05 to Collection server; keeping in queue.
[18:27:21] - Expanded 238198 -> 1168228 (decompressed 490.4 percent)
[18:27:21]
[18:27:21] Project: 4437 (Run 78, Clone 4, Gen 1)
[18:27:21]
[18:27:21] Assembly optimizations on if available.
[18:27:21] Entering M.D.
[18:27:43] (Starting from checkpoint)
[18:27:43] Protein: p4437
[18:27:43]
[18:27:43] Writing local files
[18:29:11] Extra SSE boost OK.
[18:29:12] Writing local files
[18:29:12] Completed 0 out of 2500000 steps (0%)
Folding@Home Client Shutdown.
--- Opening Log file [December 22 23:37:02 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: D:\Program Files\Folding@home\Folding@home-x86
[23:37:02] - Ask before connecting: No
[23:37:02] - User name: new08 (Team 39340)
[23:37:02] - User ID: 1B61FAF6603D2F23
[23:37:02] - Machine ID: 2
[23:37:02]
[23:37:02] Loaded queue successfully.
[23:37:02] Initialization complete
[23:37:02]
[23:37:02] + Processing work unit
[23:37:02] Core required: FahCore_78.exe
[23:37:02] Core found.
[23:37:02] Project: 4110 (Run 23, Clone 19, Gen 31)
[23:37:02] + Attempting to send results [December 22 23:37:02 UTC]
[23:37:02] Working on queue slot 06 [December 22 23:37:02 UTC]
[23:37:02] + Working ...
[23:37:07]
[23:37:07] *------------------------------*
[23:37:07] Folding@Home Gromacs Core
[23:37:07] Version 1.90 (March 8, 2006)
[23:37:07]
[23:37:07] Preparing to commence simulation
[23:37:07] - Looking at optimizations...
[23:37:07] - Files status OK
[23:37:08] - Expanded 238198 -> 1168228 (decompressed 490.4 percent)
[23:37:08]
[23:37:08] Project: 4437 (Run 78, Clone 4, Gen 1)
[23:37:08]
[23:37:08] Assembly optimizations on if available.
[23:37:08] Entering M.D.
[23:37:29] - Couldn't send HTTP request to server
[23:37:29] + Could not connect to Work Server (results)
[23:37:29] (171.64.65.111:8080)
[23:37:29] + Retrying using alternative port
[23:37:29] - Couldn't send HTTP request to server
[23:37:29] + Could not connect to Work Server (results)
[23:37:29] (171.64.65.111:80)
[23:37:29] - Error: Could not transmit unit 05 (completed December 22) to work server.
[23:37:29] + Attempting to send results [December 22 23:37:29 UTC]
[23:37:29] - Couldn't send HTTP request to server
[23:37:29] + Could not connect to Work Server (results)
[23:37:29] (171.67.108.17:8080)
[23:37:29] + Retrying using alternative port
[23:37:29] - Couldn't send HTTP request to server
[23:37:29] + Could not connect to Work Server (results)
[23:37:29] (171.67.108.17:80)
[23:37:29] Could not transmit unit 05 to Collection server; keeping in queue.
[23:37:30] (Starting from checkpoint)
[23:37:30] Protein: p4437
[23:37:30]
[23:37:30] Writing local files
Folding@Home Client Shutdown.
--- Opening Log file [December 22 23:38:51 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: D:\Program Files\Folding@home\Folding@home-x86
[23:38:51] - Ask before connecting: No
[23:38:51] - User name: new08 (Team 39340)
[23:38:51] - User ID: 1B61FAF6603D2F23
[23:38:51] - Machine ID: 2
[23:38:51]
[23:38:51] Loaded queue successfully.
[23:38:51] Initialization complete
[23:38:51]
[23:38:51] + Processing work unit
[23:38:51] Core required: FahCore_78.exe
[23:38:51] Core found.
[23:38:51] Project: 4110 (Run 23, Clone 19, Gen 31)
[23:38:51] + Attempting to send results [December 22 23:38:51 UTC]
[23:38:52] Working on queue slot 06 [December 22 23:38:52 UTC]
[23:38:52] + Working ...
[23:38:52]
[23:38:52] *------------------------------*
[23:38:52] Folding@Home Gromacs Core
[23:38:52] Version 1.90 (March 8, 2006)
[23:38:52]
[23:38:52] Preparing to commence simulation
[23:38:52] - Looking at optimizations...
[23:38:52] - Files status OK
[23:38:52] - Couldn't send HTTP request to server
[23:38:52] + Could not connect to Work Server (results)
[23:38:52] (171.64.65.111:8080)
[23:38:52] + Retrying using alternative port
[23:38:52] - Couldn't send HTTP request to server
[23:38:52] + Could not connect to Work Server (results)
[23:38:52] (171.64.65.111:80)
[23:38:52] - Error: Could not transmit unit 05 (completed December 22) to work server.
[23:38:52] + Attempting to send results [December 22 23:38:52 UTC]
[23:38:52] - Couldn't send HTTP request to server
[23:38:52] + Could not connect to Work Server (results)
[23:38:52] (171.67.108.17:8080)
[23:38:52] + Retrying using alternative port
[23:38:53] - Couldn't send HTTP request to server
[23:38:53] + Could not connect to Work Server (results)
[23:38:53] (171.67.108.17:80)
[23:38:53] Could not transmit unit 05 to Collection server; keeping in queue.
[23:38:53] - Expanded 238198 -> 1168228 (decompressed 490.4 percent)
[23:38:53]
[23:38:53] Project: 4437 (Run 78, Clone 4, Gen 1)
[23:38:53]
[23:38:53] Assembly optimizations on if available.
[23:38:53] Entering M.D.
[23:39:14] (Starting from checkpoint)
[23:39:14] Protein: p4437
[23:39:14]
[23:39:14] Writing local files
[23:40:46] Completed 2155 out of 2500000 steps (0%)
[23:40:46] Extra SSE boost OK.
[03:42:08] Writing local files
[03:42:08] Completed 25000 out of 2500000 steps (1%)
[05:38:53] Project: 4110 (Run 23, Clone 19, Gen 31)
[05:38:53] + Attempting to send results [December 23 05:38:53 UTC]
[05:38:53] - Couldn't send HTTP request to server
[05:38:53] + Could not connect to Work Server (results)
[05:38:53] (171.64.65.111:8080)
[05:38:53] + Retrying using alternative port
[05:38:53] - Couldn't send HTTP request to server
[05:38:53] + Could not connect to Work Server (results)
[05:38:53] (171.64.65.111:80)
[05:38:53] - Error: Could not transmit unit 05 (completed December 22) to work server.
[05:38:53] + Attempting to send results [December 23 05:38:53 UTC]
[05:38:53] - Couldn't send HTTP request to server
[05:38:53] + Could not connect to Work Server (results)
[05:38:53] (171.67.108.17:8080)
[05:38:53] + Retrying using alternative port
[05:38:53] - Couldn't send HTTP request to server
[05:38:53] + Could not connect to Work Server (results)
[05:38:53] (171.67.108.17:80)
[05:38:53] Could not transmit unit 05 to Collection server; keeping in queue.
[08:05:38] Writing local files
[08:05:39] Completed 50000 out of 2500000 steps (2%)
Folding@Home Client Shutdown.
--- Opening Log file [December 23 10:02:50 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: D:\Program Files\Folding@home\Folding@home-x86
[10:02:50] - Ask before connecting: No
[10:02:50] - User name: new08 (Team 39340)
[10:02:50] - User ID: 1B61FAF6603D2F23
[10:02:50] - Machine ID: 2
[10:02:50]
[10:02:50] Loaded queue successfully.
[10:02:50] Initialization complete
[10:02:50]
[10:02:50] + Processing work unit
[10:02:50] Core required: FahCore_78.exe
[10:02:50] Core found.
[10:02:50] Project: 4110 (Run 23, Clone 19, Gen 31)
[10:02:50] + Attempting to send results [December 23 10:02:50 UTC]
[10:02:50] Working on queue slot 06 [December 23 10:02:50 UTC]
[10:02:50] + Working ...
[10:02:50] - Couldn't send HTTP request to server
[10:02:50] + Could not connect to Work Server (results)
[10:02:50] (171.64.65.111:8080)
[10:02:50] + Retrying using alternative port
[10:02:51] - Couldn't send HTTP request to server
[10:02:51] + Could not connect to Work Server (results)
[10:02:51] (171.64.65.111:80)
[10:02:51] - Error: Could not transmit unit 05 (completed December 22) to work server.
[10:02:51] + Attempting to send results [December 23 10:02:51 UTC]
[10:02:52]
[10:02:52] *------------------------------*
[10:02:52] Folding@Home Gromacs Core
[10:02:52] Version 1.90 (March 8, 2006)
[10:02:52]
[10:02:52] Preparing to commence simulation
[10:02:52] - Looking at optimizations...
[10:02:52] - Files status OK
[10:02:52] - Couldn't send HTTP request to server
[10:02:52] + Could not connect to Work Server (results)
[10:02:52] (171.67.108.17:8080)
[10:02:52] + Retrying using alternative port
[10:02:52] - Couldn't send HTTP request to server
[10:02:52] + Could not connect to Work Server (results)
[10:02:52] (171.67.108.17:80)
[10:02:52] Could not transmit unit 05 to Collection server; keeping in queue.
[10:02:53] - Expanded 238198 -> 1168228 (decompressed 490.4 percent)
[10:02:53]
[10:02:53] Project: 4437 (Run 78, Clone 4, Gen 1)
[10:02:53]
[10:02:53] Assembly optimizations on if available.
[10:02:53] Entering M.D.
[10:03:14] (Starting from checkpoint)
[10:03:14] Protein: p4437
[10:03:14]
[10:03:14] Writing local files
[10:04:44] Completed 58549 out of 2500000 steps (2%)
[10:04:44] Extra SSE boost OK.
[13:04:23] Writing local files
[13:04:23] Completed 75000 out of 2500000 steps (3%)
[16:03:54] Project: 4110 (Run 23, Clone 19, Gen 31)
[16:03:54] + Attempting to send results [December 23 16:03:54 UTC]
[16:03:54] - Couldn't send HTTP request to server
[16:03:54] + Could not connect to Work Server (results)
[16:03:54] (171.64.65.111:8080)
[16:03:54] + Retrying using alternative port
[16:03:54] - Couldn't send HTTP request to server
[16:03:54] + Could not connect to Work Server (results)
[16:03:54] (171.64.65.111:80)
[16:03:54] - Error: Could not transmit unit 05 (completed December 22) to work server.
[16:03:54] + Attempting to send results [December 23 16:03:54 UTC]
[16:03:54] - Couldn't send HTTP request to server
[16:03:54] + Could not connect to Work Server (results)
[16:03:54] (171.67.108.17:8080)
[16:03:54] + Retrying using alternative port
[16:03:54] - Couldn't send HTTP request to server
[16:03:54] + Could not connect to Work Server (results)
[16:03:54] (171.67.108.17:80)
[16:03:54] Could not transmit unit 05 to Collection server; keeping in queue.
[17:35:23] Writing local files
[17:35:23] Completed 100000 out of 2500000 steps (4%)
[22:03:56] Project: 4110 (Run 23, Clone 19, Gen 31)
[22:03:56] + Attempting to send results [December 23 22:03:56 UTC]
[22:03:56] - Couldn't send HTTP request to server
[22:03:56] + Could not connect to Work Server (results)
[22:03:56] (171.64.65.111:8080)
[22:03:56] + Retrying using alternative port
[22:03:56] - Couldn't send HTTP request to server
[22:03:56] + Could not connect to Work Server (results)
[22:03:56] (171.64.65.111:80)
[22:03:56] - Error: Could not transmit unit 05 (completed December 22) to work server.
[22:03:56] + Attempting to send results [December 23 22:03:56 UTC]
[22:03:56] - Couldn't send HTTP request to server
[22:03:56] + Could not connect to Work Server (results)
[22:03:56] (171.67.108.17:8080)
[22:03:56] + Retrying using alternative port
[22:03:56] - Couldn't send HTTP request to server
[22:03:56] + Could not connect to Work Server (results)
[22:03:56] (171.67.108.17:80)
[22:03:56] Could not transmit unit 05 to Collection server; keeping in queue.
[22:06:09] Writing local files
[22:06:09] Completed 125000 out of 2500000 steps (5%)
Folding@Home Client Shutdown.
Re: 171 67 108 17 No uploads going thru
Posted: Sat Dec 27, 2008 5:28 pm
by oroborous
i have had the same issue with this server not allowing me to upload a completed wu
Project: 2445 (Run 5, Clone 22, Gen 0)
Code: Select all
[16:49:11] + Attempting to send results
[16:49:11] - Reading file work/wuresults_02.dat from core
[16:49:11] (Read 40542298 bytes from disk)
[16:49:11] Connecting to http://171.65.103.160:80/
[16:49:38] - Couldn't send HTTP request to server
[16:49:38] + Could not connect to Work Server (results)
[16:49:38] (171.65.103.160:80)
[16:49:38] - Error: Could not transmit unit 02 (completed December 26) to work s
erver.
[16:49:38] - 9 failed uploads of this unit.
[16:49:38] + Attempting to send results
[16:49:38] - Reading file work/wuresults_02.dat from core
[16:49:38] (Read 40542298 bytes from disk)
[16:49:38] Connecting to http://171.67.108.17:80/
[16:49:46] - Couldn't send HTTP request to server
[16:49:46] + Could not connect to Work Server (results)
[16:49:46] (171.67.108.17:80)
[16:49:46] Could not transmit unit 02 to Collection server; keeping in queue.
[16:49:46] + Sent 0 of 1 completed units to the server
the pc in question has now moved onto another work unit
but i'd obviously like to return the results
Re: 171 67 108 17 No uploads going thru
Posted: Sat Dec 27, 2008 6:40 pm
by codysluder
Apparently you're connecting through a proxy. That's not necessarily a problem,but it is one more thing ti check. Can you thy connecting another way?
When I open
http://171.67.108.17/ I do not get the expected "OK" so I believe that server is very busy. I do get the OK from
http://171.65.103.160
Re: 171 67 108 17 No uploads going thru
Posted: Sun Dec 28, 2008 12:12 pm
by oroborous
codysluder wrote:Apparently you're connecting through a proxy. That's not necessarily a problem,but it is one more thing ti check. Can you thy connecting another way?
When I open
http://171.67.108.17/ I do not get the expected "OK" so I believe that server is very busy. I do get the OK from
http://171.65.103.160
i tried copying the folder lock stock and barrel to another pc,
not on the same isp, and although it failed to upload several times,
its now returned the results
Code: Select all
[12:03:35] + Attempting to send results
[12:08:45] + Results successfully sent
[12:08:45] Thank you for your contribution to Folding@Home.
[12:08:45] + Number of Units Completed: 2
[12:08:45] Successfully sent unit 02 to Collection server.
Folding@Home Client Shutdown.
Re: 171 67 108 17 No uploads going thru
Posted: Sun Dec 28, 2008 4:25 pm
by Xilikon
Same here :
Code: Select all
[00:15:23] Completed 5000 out of 250000 steps (2%)
[00:30:24] Timered checkpoint triggered.
[00:45:28] Timered checkpoint triggered.
[01:00:29] Timered checkpoint triggered.
[01:03:03] - Autosending finished units... [December 27 01:03:03 UTC]
[01:03:03] Trying to send all finished work units
[01:03:03] Project: 2443 (Run 13, Clone 4, Gen 2)
[01:03:03] - Read packet limit of 540015616... Set to 524286976.
[01:03:03] + Attempting to send results [December 27 01:03:03 UTC]
[01:03:03] - Reading file work/wuresults_03.dat from core
[01:03:03] (Read 41350334 bytes from disk)
[01:03:03] Connecting to http://171.65.103.160:8080/
[01:03:07] - Couldn't send HTTP request to server
[01:03:07] + Could not connect to Work Server (results)
[01:03:07] (171.65.103.160:8080)
[01:03:07] + Retrying using alternative port
[01:03:07] Connecting to http://171.65.103.160:80/
[01:03:08] - Couldn't send HTTP request to server
[01:03:08] + Could not connect to Work Server (results)
[01:03:08] (171.65.103.160:80)
[01:03:08] - Error: Could not transmit unit 03 (completed December 26) to work server.
[01:03:08] - 4 failed uploads of this unit.
[01:03:08] - Read packet limit of 540015616... Set to 524286976.
[01:03:08] + Attempting to send results [December 27 01:03:08 UTC]
[01:03:08] - Reading file work/wuresults_03.dat from core
[01:03:08] (Read 41350334 bytes from disk)
[01:03:08] Connecting to http://171.67.108.17:8080/
[01:03:08] - Couldn't send HTTP request to server
[01:03:08] (Got status 503)
[01:03:08] + Could not connect to Work Server (results)
[01:03:08] (171.67.108.17:8080)
[01:03:08] + Retrying using alternative port
[01:03:08] Connecting to http://171.67.108.17:80/
[01:03:09] - Couldn't send HTTP request to server
[01:03:09] (Got status 503)
[01:03:09] + Could not connect to Work Server (results)
[01:03:09] (171.67.108.17:80)
[01:03:09] Could not transmit unit 03 to Collection server; keeping in queue.
[01:03:09] + Sent 0 of 1 completed units to the server
[01:03:09] - Autosend completed
[01:15:33] Timered checkpoint triggered.
[01:30:34] Timered checkpoint triggered.
[01:45:36] Timered checkpoint triggered.
[02:00:38] Timered checkpoint triggered.
[02:10:33] Writing local files
[02:10:34] Completed 7500 out of 250000 steps (3%)
[02:25:36] Timered checkpoint triggered.
I have a total of 14 clients uploading/downloading and only those uniprocessor clients is unable to upload the 244x units so a chunk of points is sitting
Re: 171 67 108 17 No uploads going thru
Posted: Sun Dec 28, 2008 5:30 pm
by VijayPande
This is a CS, which is fairly heavily loaded. I've restarted it, but in general, the real fix will come from the CS server code update (slated for Jan 2009). For now, hopefully this kick will help a bit.