Folding Forum

Posted: **Fri Nov 28, 2008 4:46 am**

Yet another failure on my 9600GSO.

[00:16:35] Project: 5752 (Run 1, Clone 0, Gen 5)
[00:16:35] 
[00:16:35] Assembly optimizations on if available.
[00:16:35] Entering M.D.
[00:16:42] Working on Protein
[00:16:46] Client config found, loading data.
[00:16:46] Starting GUI Server
[00:19:12] Completed 1%
[00:21:38] Completed 2%
[00:24:04] Completed 3%
[00:26:30] Completed 4%
[00:28:56] Completed 5%
[00:31:21] Completed 6%
[00:33:47] Completed 7%
[00:36:13] Completed 8%
[00:38:39] Completed 9%
[00:41:05] Completed 10%
[00:43:31] Completed 11%
[00:45:57] Completed 12%
[00:48:22] Completed 13%
[00:50:48] Completed 14%
[00:53:14] Completed 15%
[00:55:40] Completed 16%
[00:58:06] Completed 17%
[01:00:32] Completed 18%
[01:02:57] Completed 19%
[01:05:24] Completed 20%
[01:07:49] Completed 21%
[01:10:15] Completed 22%
[01:12:41] Completed 23%
[01:15:07] Completed 24%
[01:17:33] Completed 25%
[01:18:31] Run: exception thrown during GuardedRun
[01:18:31] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[01:18:31] Going to send back what have done -- stepsTotalG=10000000
[01:18:31] Work fraction=0.2540 steps=10000000.
[01:18:35] logfile size=13602 infoLength=13602 edr=0 trr=23
[01:18:35] - Writing 14138 bytes of core data to disk...
[01:18:35] Done: 13626 -> 4283 (compressed to 31.4 percent)
[01:18:35]   ... Done.
[01:18:35] 
[01:18:35] Folding@home Core Shutdown: UNSTABLE_MACHINE
[01:18:38] CoreStatus = 7A (122)
[01:18:38] Sending work to server
[01:18:38] Project: 5752 (Run 1, Clone 0, Gen 5)


[01:18:38] + Attempting to send results [November 28 01:18:38 UTC]
[01:18:38] + Results successfully sent
[01:18:38] Thank you for your contribution to Folding@Home.

Posted: **Fri Nov 28, 2008 12:06 pm**

What core do you use ? (there's no other report for this WU yet)

Posted: **Fri Nov 28, 2008 4:54 pm**

toTOW wrote:What core do you use ? (there's no other report for this WU yet)

I left you a message in IRC, but I'm using 1.19 right now on this card.

My intake fan failed last night so I'm going to keep an eye on it. It is currently working on one of of the newer WU's and hasn't failed yet.

Posted: **Sat Dec 13, 2008 7:52 pm**

I had the same thing on 5752 and it locked up the entire system and had to do a hard reset.

I'm running 2 GPU clients on GTX 260's 177.83 drivers and a fresh Vista x64 install. The clients had been running fine after the reformat and ran for 24 hours until I hit this one.

Code: Select all

    [17:54:17] *------------------------------*
    [17:54:17] Folding@Home GPU Core - Beta
    [17:54:17] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
    [17:54:17]
    [17:54:17] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
    [17:54:17] Build host: amoeba
    [17:54:17] Board Type: Nvidia
    [17:54:17] Core      :
    [17:54:17] Preparing to commence simulation
    [17:54:17] - Looking at optimizations...
    [17:54:17] - Created dyn
    [17:54:17] - Files status OK
    [17:54:17] - Expanded 96573 -> 489240 (decompressed 506.6 percent)
    [17:54:17] Called DecompressByteArray: compressed_data_size=96573 data_size=489240, decompressed_data_size=489240 diff=0
    [17:54:17] - Digital signature verified
    [17:54:17]
    [17:54:17] Project: 5752 (Run 14, Clone 220, Gen 1)
    [17:54:17]
    [17:54:17] Assembly optimizations on if available.
    [17:54:17] Entering M.D.
    [17:54:23] Working on Protein
    [17:54:26] Client config found, loading data.
    [17:54:26] Starting GUI Server
    [17:55:53] Completed 1%
    [17:57:17] Completed 2%
    [17:58:42] Completed 3%
    [18:00:05] Completed 4%
    [18:01:30] Completed 5%
    [18:02:54] Completed 6%
    [18:04:19] Completed 7%
    [18:05:44] Completed 8%
    [18:07:08] Completed 9%
    [18:08:32] Completed 10%
    [18:09:56] Completed 11%
    [18:11:20] Completed 12%
    [18:12:44] Completed 13%
    [18:14:10] Completed 14%
    [18:15:39] Completed 15%
    [18:17:06] Completed 16%
    [18:18:34] Completed 17%
    [18:20:03] Completed 18%
    [18:21:31] Completed 19%
    [18:22:59] Completed 20%
    [18:24:27] Completed 21%
    [18:25:53] Completed 22%
    [18:27:19] Completed 23%
    [18:28:46] Completed 24%
    [18:30:13] Completed 25%
    [18:31:40] Completed 26%
    [18:33:06] Completed 27%
    [18:34:32] Completed 28%
    [18:35:58] Completed 29%
    [18:37:24] Completed 30%
    [18:38:50] Completed 31%
    [18:40:16] Completed 32%
    [18:41:42] Completed 33%
    [18:43:08] Completed 34%
    [18:44:34] Completed 35%
    [18:46:01] Completed 36%
    [18:47:27] Completed 37%
    [18:48:55] Completed 38%
    [18:50:22] Completed 39%
    [18:51:49] Completed 40%
    [18:53:16] Completed 41%
    [18:54:43] Completed 42%
    [18:56:09] Completed 43%
    [18:57:35] Completed 44%
    [18:59:02] Completed 45%
    [19:00:22] Run: exception thrown during GuardedRun
    [19:00:22] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
    [19:00:22] Going to send back what have done -- stepsTotalG=10000000
    [19:00:22] Work fraction=0.4573 steps=10000000.

Posted: **Sun Dec 14, 2008 7:34 pm**

Project: 5752 (Run 14, Clone 220, Gen 1) : someone was able to complete it.

Posted: **Sun Dec 14, 2008 7:36 pm**

ItsLasher wrote:I had the same thing on 5752 and it locked up the entire system and had to do a hard reset.

Project: 5752 (Run 14, Clone 220, Gen 1)

That WU was completed successfully and returned for full credit by another donor yesterday afternoon.

Edit: Don't mind me. I am an echo.

Posted: **Sun Dec 14, 2008 11:23 pm**

Once again this WU's crashes the entire system.

How many reports does it take to get a response other than "Well some one else turn it in no problem"?

[23:05:17] Project: 5752 (Run 12, Clone 224, Gen 4)
[23:05:17]
[23:05:17] Assembly optimizations on if available.
[23:05:17] Entering M.D.
[23:05:24] Working on Protein
[23:05:26] Client config found, loading data.
[23:05:26] Starting GUI Server
[23:06:50] Completed 1%
[23:08:14] Completed 2%
[23:09:39] Completed 3%
[23:11:06] Completed 4%
[23:12:31] Completed 5%
[23:13:57] Completed 6%
[23:15:22] Completed 7%
[23:15:40] Run: exception thrown during GuardedRun
[23:15:40] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[23:15:40] Going to send back what have done -- stepsTotalG=10000000
[23:15:40] Work fraction=0.0702 steps=10000000.

Posted: **Mon Dec 15, 2008 12:00 am**

What would you like to hear instead ? It's your job to interpret the situation ... that simply means that the issue is not with the WU, but something on your end.

What are you doing when it crashes ?

Posted: **Mon Dec 15, 2008 12:05 am**

toTOW wrote:What would you like to hear instead ? It's your job to interpret the situation ... that simply means that the issue is not with the WU, but something on your end.

What are you doing when it crashes ?

I am having to hit the reset button to reboot to get back to Windows. I can run a check disk and it come out just fine and it happens whether the systems are idle or I'm using them.
This is happening on 3 different systems with the same WU's so it is not limited to one machine or set up.

I see problem after problem with the 57xx series WU's being reported so it all can't be on the users end.

Posted: **Mon Dec 15, 2008 12:07 am**

I'm not asking what you do to solve the issue ... but what you're doing on the machine to trigger it (gaming ? video playback ? using the viewer ? ... ?).

Posted: **Mon Dec 15, 2008 12:11 am**

toTOW wrote:I'm not asking what you do to solve the issue ... but what you're doing on the machine to trigger it (gaming ? video playback ? using the viewer ? ... ?).

Idle, watching a movie, listening to music or surfing the net it happens and I'm running the console client so no viewer.
Generally when it happens and I try to restart the client it D\L another WU and starts from 1% it not restart the same WU except 1 time.

Posted: **Fri Dec 19, 2008 3:43 am**

The most common reasons for systems to hang are overclocking, overheating, inadequate power, and bugs in older drivers. The fact that somebody else was able to finish the WU and you were not able to points to some kind of deficiency in your system, but problems like that are often difficult to diagnose other than by simple trial and error.

Folding Forum

Project: 5752 (Run 1, Clone 0, Gen 5)

Project: 5752 (Run 1, Clone 0, Gen 5)

Re: Project: 5752 (Run 1, Clone 0, Gen 5)

Re: Project: 5752 (Run 1, Clone 0, Gen 5)

Re: Project: 5752 (Run 1, Clone 0, Gen 5)

Re: Project: 5752 (Run 1, Clone 0, Gen 5)

Re: Project: 5752 (Run 1, Clone 0, Gen 5)

Re: Project: 5752 (Run 1, Clone 0, Gen 5)

Re: Project: 5752 (Run 1, Clone 0, Gen 5)

Re: Project: 5752 (Run 1, Clone 0, Gen 5)

Re: Project: 5752 (Run 1, Clone 0, Gen 5)

Re: Project: 5752 (Run 1, Clone 0, Gen 5)

Re: Project: 5752 (Run 1, Clone 0, Gen 5)