Folding Forum

Community driven support forum for Folding@home
https://foldingforum.org/

Project: 2665 (Run 0, Clone 545, Gen 48)

https://foldingforum.org/viewtopic.php?t=6014

Page 1 of 1

Project: 2665 (Run 0, Clone 545, Gen 48)

Posted: Sat Oct 04, 2008 2:23 am
by ElectricVehicle
Project: 2665 (Run 0, Clone 545, Gen 48)

Please check the DB for any information in this WU. Thanks in advance!


Note this WU failed twice in exactly the same spot, with exactly the same error!

[21:10:16] Completed 62500 out of 250000 steps (25 percent)
[21:22:04] Warning: long 1-4 interactions
[21:22:04] Quit 101 - NaN detected: (ener[20])
It will probably fail a third time in the same spot, it's still running and just hasn't reached that spot yet.

Log summary:
[21:10:16] Completed 62500 out of 250000 steps (25 percent)
[21:22:04] Warning: long 1-4 interactions
[21:22:04] Quit 101 - NaN detected: (ener[20])
[21:22:04]
[21:22:04] Simulation instability has been encountered. The run has entered a
[21:22:04] state from which no further progress can be made.
[21:22:04] This may be the correct result of the simulation, however if you
[21:22:04] often see other project units terminating early like this
[21:22:04] too, you may wish to check the stability of your computer (issues
[21:22:04] such as high temperature, overclocking, etc.).
[21:22:04] Going to send back what have done.
[21:22:04] logfile size: 56168
[21:22:04] - Writing 56718 bytes of core data to disk...
[21:22:04] ... Done.
[21:24:04]
[21:24:04] Folding@home Core Shutdown: EARLY_UNIT_END
[21:24:04]
[21:24:04] Folding@home Core Shutdown: EARLY_UNIT_END
[21:24:07] CoreStatus = 7B (123)
[21:24:07] Client-core communications error: ERROR 0x7b
[21:24:07] Deleting current work unit & continuing...
[21:24:07] Using generic mpiexec calls
[21:26:09] - Warning: Could not delete all work unit files (6): Core returned invalid code
[21:26:09] Trying to send all finished work units
[21:26:09] + No unsent completed units remaining.

Code: Select all

# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.22 SMP Beta2r3

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\GatoPrimo\Fah2ndSmpClient
Executable: C:\Users\GatoPrimo\Fah2ndSmpClient\Folding@home-Win32-x86.exe
Arguments: -smp -verbosity 9 

[04:07:17] - Ask before connecting: No
[04:07:17] - User name: [EV]LithiumSmp (Team 104636)
[04:07:17] - User ID: C7BCBFB2C868C07
[04:07:17] - Machine ID: 3
[04:07:17] 


[01:22:41] + Attempting to get work packet
[01:22:41] - Will indicate memory of 3070 MB
[01:22:41] - Connecting to assignment server
[01:22:41] Connecting to http://assign.stanford.edu:8080/
[01:22:41] Posted data.
[01:22:41] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[01:22:41] + News From Folding@Home: Welcome to Folding@Home
[01:22:41] Loaded queue successfully.
[01:22:41] Connecting to http://171.64.65.64:8080/
[01:22:46] Posted data.
[01:22:46] Initial: 0000; - Receiving payload (expected size: 4684476)
[01:22:59] - Downloaded at ~351 kB/s
[01:22:59] - Averaged speed for that direction ~298 kB/s
[01:22:59] + Received work.
[01:22:59] Trying to send all finished work units
[01:22:59] + No unsent completed units remaining.
[01:22:59] + Closed connections
[01:22:59] 
[01:22:59] + Processing work unit
[01:22:59] Work type a1 not eligible for variable processors
[01:22:59] Core required: FahCore_a1.exe
[01:22:59] Core found.
[01:22:59] Using generic mpiexec calls
[01:22:59] Working on queue slot 05 [October 3 01:22:59 UTC]
[01:22:59] + Working ...
[01:22:59] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe -dir work/ -suffix 05 -checkpoint 30 -verbose -lifeline 5204 -version 622'

[01:22:59] 
[01:22:59] *------------------------------*
[01:22:59] Folding@Home Gromacs SMP Core
[01:22:59] Version 1.74 (March 10, 2007)
[01:22:59] 
[01:22:59] Preparing to commence simulation
[01:22:59] - Ensuring status. Please wait.
[01:23:06] - Starting from initial work packet
[01:23:07] 
[01:23:07] Project: 2665 (Run 0, Clone 545, Gen 48)
[01:23:07] 
[01:23:07] Assembly optimizations on if available.
[01:23:07] Entering M.D.
[01:23:26] al work packet
[01:23:26] 
[01:23:26] Project: 2665 (Run 0, Clone 545, Gen 48)
[01:23:26] 
[01:23:27] Entering M.D.
[01:23:37] ne 545, Gen 48)
[01:23:37] 
[01:23:38] Entering M.D.
[01:23:44] Rejecting checkpoint
[01:23:46] Protein: HGG in water
[01:23:46] Writing local files
[01:24:00] Extra SSE boost OK.
[01:24:00] Writing local files
[01:24:01] Completed 0 out of 250000 steps  (0 percent)
[01:49:12] Writing local files
[01:49:12] Completed 2500 out of 250000 steps  (1 percent)
[02:14:17] Writing local files
[02:14:17] Completed 5000 out of 250000 steps  (2 percent)
[02:39:14] Writing local files
[02:39:14] Completed 7500 out of 250000 steps  (3 percent)
[03:04:24] Writing local files
[03:04:24] Completed 10000 out of 250000 steps  (4 percent)
[03:29:19] Writing local files
[03:29:19] Completed 12500 out of 250000 steps  (5 percent)
[03:54:14] Writing local files
[03:54:14] Completed 15000 out of 250000 steps  (6 percent)
[04:19:08] Writing local files
[04:19:08] Completed 17500 out of 250000 steps  (7 percent)
[04:23:39] - Autosending finished units... [October 3 04:23:39 UTC]
[04:23:39] Trying to send all finished work units
[04:23:39] + No unsent completed units remaining.
[04:23:39] - Autosend completed
[04:44:02] Writing local files
[04:44:03] Completed 20000 out of 250000 steps  (8 percent)
[05:08:58] Writing local files
[05:08:58] Completed 22500 out of 250000 steps  (9 percent)
[05:33:51] Writing local files
[05:33:52] Completed 25000 out of 250000 steps  (10 percent)
[05:58:46] Writing local files
[05:58:47] Completed 27500 out of 250000 steps  (11 percent)
[06:23:42] Writing local files
[06:23:43] Completed 30000 out of 250000 steps  (12 percent)
[06:48:36] Writing local files
[06:48:36] Completed 32500 out of 250000 steps  (13 percent)
[07:13:30] Writing local files
[07:13:31] Completed 35000 out of 250000 steps  (14 percent)
[07:38:25] Writing local files
[07:38:26] Completed 37500 out of 250000 steps  (15 percent)
[08:03:21] Writing local files
[08:03:21] Completed 40000 out of 250000 steps  (16 percent)
[08:28:15] Writing local files
[08:28:15] Completed 42500 out of 250000 steps  (17 percent)
[08:53:36] Writing local files
[08:53:36] Completed 45000 out of 250000 steps  (18 percent)
[09:16:00] Writing local files
[09:16:00] Completed 47500 out of 250000 steps  (19 percent)
[09:37:38] Writing local files
[09:37:38] Completed 50000 out of 250000 steps  (20 percent)
[09:59:14] Writing local files
[09:59:14] Completed 52500 out of 250000 steps  (21 percent)
[10:20:52] Writing local files
[10:20:52] Completed 55000 out of 250000 steps  (22 percent)
[10:23:38] - Autosending finished units... [October 3 10:23:38 UTC]
[10:23:38] Trying to send all finished work units
[10:23:38] + No unsent completed units remaining.
[10:23:38] - Autosend completed
[10:42:29] Writing local files
[10:42:29] Completed 57500 out of 250000 steps  (23 percent)
[11:04:06] Writing local files
[11:04:06] Completed 60000 out of 250000 steps  (24 percent)
[11:25:39] Writing local files
[11:25:39] Completed 62500 out of 250000 steps  (25 percent)
[11:36:41] Warning:  long 1-4 interactions
[11:36:42] Quit 101 - NaN detected: (ener[20])
[11:36:42] 
[11:36:42] Simulation instability has been encountered. The run has entered a
[11:36:42]   state from which no further progress can be made.
[11:36:42] This may be the correct result of the simulation, however if you
[11:36:42]   often see other project units terminating early like this
[11:36:42]   too, you may wish to check the stability of your computer (issues
[11:36:42]   such as high temperature, overclocking, etc.).
[11:36:42] Going to send back what have done.
[11:36:42] logfile size: 9422
[11:36:42] - Writing 9972 bytes of core data to disk...
[11:36:42]   ... Done.
[11:36:42] - Failed to delete work/wudata_05.arc
[11:36:42] Warning:  check for stray files
[11:38:42] 
[11:38:42] Folding@home Core Shutdown: EARLY_UNIT_END
[11:38:42] 
[11:38:42] Folding@home Core Shutdown: EARLY_UNIT_END
[11:38:46] CoreStatus = 7B (123)
[11:38:46] Client-core communications error: ERROR 0x7b
[11:38:46] Deleting current work unit & continuing...
[11:38:46] Using generic mpiexec calls
[11:40:48] - Warning: Could not delete all work unit files (5): Core returned invalid code
[11:40:48] Trying to send all finished work units
[11:40:48] + No unsent completed units remaining.
[11:40:48] - Preparing to get new work unit...
[11:40:48] + Attempting to get work packet
[11:40:48] - Will indicate memory of 3070 MB
[11:40:48] - Connecting to assignment server
[11:40:48] Connecting to http://assign.stanford.edu:8080/
[11:40:48] Posted data.
[11:40:48] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[11:40:48] + News From Folding@Home: Welcome to Folding@Home
[11:40:49] Loaded queue successfully.
[11:40:49] Connecting to http://171.64.65.64:8080/
[11:40:54] Posted data.
[11:40:54] Initial: 0000; - Receiving payload (expected size: 4684476)
[11:41:05] - Downloaded at ~415 kB/s
[11:41:05] - Averaged speed for that direction ~321 kB/s
[11:41:05] + Received work.
[11:41:06] + Closed connections
[11:41:11] 
[11:41:11] + Processing work unit
[11:41:11] Work type a1 not eligible for variable processors
[11:41:11] Core required: FahCore_a1.exe
[11:41:11] Core found.
[11:41:11] Using generic mpiexec calls
[11:41:11] Working on queue slot 06 [October 3 11:41:11 UTC]
[11:41:11] + Working ...
[11:41:11] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe -dir work/ -suffix 06 -checkpoint 30 -verbose -lifeline 5204 -version 622'

[11:41:11] 
[11:41:11] *------------------------------*
[11:41:11] Folding@Home Gromacs SMP Core
[11:41:11] Version 1.74 (March 10, 2007)
[11:41:11] 
[11:41:11] Preparing to commence simulation
[11:41:11] - Ensuring status. Please wait.
[11:41:17] - Starting from initial work packet
[11:41:18] 
[11:41:18] Project: 2665 (Run 0, Clone 545, Gen 48)
[11:41:18] 
[11:41:18] Assembly optimizations on if available.
[11:41:18] Entering M.D.
[11:41:42]  percent)
[11:41:42] - Starting from initial work packet
[11:41:42] 
[11:41:42] Project: 2665 (Run 0, Clone 545, Gen 48)
[11:41:42] 
[11:41:42] Entering M.D.
[11:41:53] Rejecting checkpoint
[11:41:55] 
[11:41:55] Writing local files
[11:41:56] 
[11:41:56] Writing local files
[11:42:08] Extra SSE boost OK.
[11:42:08] Writing local files
[11:42:09] Completed 0 out of 250000 steps  (0 percent)
[12:05:00] Writing local files
[12:05:00] Completed 2500 out of 250000 steps  (1 percent)
[12:27:51] Writing local files
[12:27:51] Completed 5000 out of 250000 steps  (2 percent)
[12:50:43] Writing local files
[12:50:43] Completed 7500 out of 250000 steps  (3 percent)
[13:13:37] Writing local files
[13:13:37] Completed 10000 out of 250000 steps  (4 percent)
[13:36:30] Writing local files
[13:36:31] Completed 12500 out of 250000 steps  (5 percent)
[13:59:25] Writing local files
[13:59:25] Completed 15000 out of 250000 steps  (6 percent)
[14:22:19] Writing local files
[14:22:19] Completed 17500 out of 250000 steps  (7 percent)
[14:45:07] Writing local files
[14:45:07] Completed 20000 out of 250000 steps  (8 percent)
[15:07:58] Writing local files
[15:07:58] Completed 22500 out of 250000 steps  (9 percent)
[15:30:51] Writing local files
[15:30:51] Completed 25000 out of 250000 steps  (10 percent)
[15:53:41] Writing local files
[15:53:41] Completed 27500 out of 250000 steps  (11 percent)
[16:16:33] Writing local files
[16:16:33] Completed 30000 out of 250000 steps  (12 percent)
[16:23:38] - Autosending finished units... [October 3 16:23:38 UTC]
[16:23:38] Trying to send all finished work units
[16:23:38] + No unsent completed units remaining.
[16:23:38] - Autosend completed
[16:39:26] Writing local files
[16:39:26] Completed 32500 out of 250000 steps  (13 percent)
[17:02:21] Writing local files
[17:02:22] Completed 35000 out of 250000 steps  (14 percent)
[17:25:15] Writing local files
[17:25:16] Completed 37500 out of 250000 steps  (15 percent)
[17:48:07] Writing local files
[17:48:07] Completed 40000 out of 250000 steps  (16 percent)
[18:10:49] Writing local files
[18:10:50] Completed 42500 out of 250000 steps  (17 percent)
[18:33:02] Writing local files
[18:33:02] Completed 45000 out of 250000 steps  (18 percent)
[18:55:16] Writing local files
[18:55:16] Completed 47500 out of 250000 steps  (19 percent)
[19:17:30] Writing local files
[19:17:30] Completed 50000 out of 250000 steps  (20 percent)
[19:39:47] Writing local files
[19:39:47] Completed 52500 out of 250000 steps  (21 percent)
[20:02:01] Writing local files
[20:02:01] Completed 55000 out of 250000 steps  (22 percent)
[20:24:25] Writing local files
[20:24:25] Completed 57500 out of 250000 steps  (23 percent)
[20:47:19] Writing local files
[20:47:19] Completed 60000 out of 250000 steps  (24 percent)
[21:10:15] Writing local files
[21:10:16] Completed 62500 out of 250000 steps  (25 percent)
[21:22:04] Warning:  long 1-4 interactions
[21:22:04] Quit 101 - NaN detected: (ener[20])
[21:22:04] 
[21:22:04] Simulation instability has been encountered. The run has entered a
[21:22:04]   state from which no further progress can be made.
[21:22:04] This may be the correct result of the simulation, however if you
[21:22:04]   often see other project units terminating early like this
[21:22:04]   too, you may wish to check the stability of your computer (issues
[21:22:04]   such as high temperature, overclocking, etc.).
[21:22:04] Going to send back what have done.
[21:22:04] logfile size: 56168
[21:22:04] - Writing 56718 bytes of core data to disk...
[21:22:04]   ... Done.
[21:24:04] 
[21:24:04] Folding@home Core Shutdown: EARLY_UNIT_END
[21:24:04] 
[21:24:04] Folding@home Core Shutdown: EARLY_UNIT_END
[21:24:07] CoreStatus = 7B (123)
[21:24:07] Client-core communications error: ERROR 0x7b
[21:24:07] Deleting current work unit & continuing...
[21:24:07] Using generic mpiexec calls
[21:26:09] - Warning: Could not delete all work unit files (6): Core returned invalid code
[21:26:09] Trying to send all finished work units
[21:26:09] + No unsent completed units remaining.
[21:26:09] - Preparing to get new work unit...
[21:26:09] + Attempting to get work packet
[21:26:09] - Will indicate memory of 3070 MB
[21:26:09] - Connecting to assignment server
[21:26:09] Connecting to http://assign.stanford.edu:8080/
[21:26:10] Posted data.
[21:26:10] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[21:26:10] + News From Folding@Home: Welcome to Folding@Home
[21:26:10] Loaded queue successfully.
[21:26:10] Connecting to http://171.64.65.64:8080/
[21:26:15] Posted data.
[21:26:15] Initial: 0000; - Receiving payload (expected size: 4684476)
[21:26:41] - Downloaded at ~175 kB/s
[21:26:41] - Averaged speed for that direction ~292 kB/s
[21:26:41] + Received work.
[21:26:41] + Closed connections
[21:26:46] 
[21:26:46] + Processing work unit
[21:26:46] Work type a1 not eligible for variable processors
[21:26:46] Core required: FahCore_a1.exe
[21:26:46] Core found.
[21:26:46] Using generic mpiexec calls
[21:26:46] Working on queue slot 07 [October 3 21:26:46 UTC]
[21:26:46] + Working ...
[21:26:46] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe -dir work/ -suffix 07 -checkpoint 30 -verbose -lifeline 5204 -version 622'

[21:26:46] 
[21:26:46] *------------------------------*
[21:26:46] Folding@Home Gromacs SMP Core
[21:26:46] Version 1.74 (March 10, 2007)
[21:26:46] 
[21:26:46] Preparing to commence simulation
[21:26:46] - Ensuring status. Please wait.
[21:26:53] - Starting from initial work packet
[21:26:53] 
[21:26:53] Project: 2665 (Run 0, Clone 545, Gen 48)
[21:26:53] 
[21:26:53] Assembly optimizations on if available.
[21:26:53] Entering M.D.
[21:27:13] al work packet
[21:27:13] 
[21:27:13] Project: 2665 (Run 0, Clone 545, Gen 48)
[21:27:13] 
[21:27:13] Entering M.D.
[21:27:24] ne 545, Gen 48)
[21:27:24] 
[21:27:25] Entering M.D.
[21:27:31] Rejecting checkpoint
[21:27:34] Protein: HGG in water
[21:27:34] Writing local files
[21:27:47] Extra SSE boost OK.
[21:27:47] Writing local files
[21:27:48] Completed 0 out of 250000 steps  (0 percent)
[21:52:39] Writing local files
[21:52:39] Completed 2500 out of 250000 steps  (1 percent)
[22:17:31] Writing local files
[22:17:32] Completed 5000 out of 250000 steps  (2 percent)
[22:23:38] - Autosending finished units... [October 3 22:23:38 UTC]
[22:23:38] Trying to send all finished work units
[22:23:38] + No unsent completed units remaining.
[22:23:38] - Autosend completed
[22:42:24] Writing local files
[22:42:25] Completed 7500 out of 250000 steps  (3 percent)
[23:07:19] Writing local files
[23:07:19] Completed 10000 out of 250000 steps  (4 percent)
[23:32:09] Writing local files
[23:32:09] Completed 12500 out of 250000 steps  (5 percent)
[23:57:00] Writing local files
[23:57:00] Completed 15000 out of 250000 steps  (6 percent)
[00:21:52] Writing local files
[00:21:52] Completed 17500 out of 250000 steps  (7 percent)
[00:46:57] Writing local files
[00:46:57] Completed 20000 out of 250000 steps  (8 percent)
[01:12:11] Writing local files
[01:12:11] Completed 22500 out of 250000 steps  (9 percent)
[01:37:17] Writing local files
[01:37:18] Completed 25000 out of 250000 steps  (10 percent)
[02:02:16] Writing local files
[02:02:16] Completed 27500 out of 250000 steps  (11 percent)
...Still running at the moment... But notice the two prior runs of this same WU failing at the same spot above...

Re: Project: 2665 (Run 0, Clone 545, Gen 48)

Posted: Sun Oct 05, 2008 6:48 pm
by toTOW
There is no data for this WU ... did you run qfix to submit your partial result ?

Re: Project: 2665 (Run 0, Clone 545, Gen 48)

Posted: Mon Oct 06, 2008 5:56 pm
by ElectricVehicle
Project: 2665 (Run 0, Clone 545, Gen 48) The Sequel...

Here's the log including the previous two runs and several more all with the same basic result...

I tried during this time to upgrade to core 1.76 which I later learned is Deino only and I'm MPICH. Toward the end I qfix'd it, and after getting assigned to it yet again, I deleted work and queue.dat to get a new unit. During all of this, the second SMP client on this same computer completed a different 2665 WU successfully.

Log selectively trimmed to fit post size limit.

Code: Select all

# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.22 SMP Beta2r3

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\GatoPrimo\Fah2ndSmpClient
Executable: C:\Users\GatoPrimo\Fah2ndSmpClient\Folding@home-Win32-x86.exe
Arguments: -smp -verbosity 9 

[04:07:17] - Ask before connecting: No
[04:07:17] - User name: [EV]LithiumSmp (Team 104636)
[04:07:17] - User ID: C7BCBFB2C868C07
[04:07:17] - Machine ID: 3


[01:22:59] 
[01:22:59] *------------------------------*
[01:22:59] Folding@Home Gromacs SMP Core
[01:22:59] Version 1.74 (March 10, 2007)
[01:22:59] 
[01:22:59] Preparing to commence simulation
[01:22:59] - Ensuring status. Please wait.
[01:23:06] - Starting from initial work packet
[01:23:07] 
[01:23:07] Project: 2665 (Run 0, Clone 545, Gen 48)
[01:23:07] 
[01:23:07] Assembly optimizations on if available.
[01:23:07] Entering M.D.
[01:23:26] al work packet
[01:23:26] 
[01:23:26] Project: 2665 (Run 0, Clone 545, Gen 48)
[01:23:26] 
[01:23:27] Entering M.D.
[01:23:37] ne 545, Gen 48)
[01:23:37] 
[01:23:38] Entering M.D.
[01:23:44] Rejecting checkpoint
[01:23:46] Protein: HGG in water
[01:23:46] Writing local files
[01:24:00] Extra SSE boost OK.
[01:24:00] Writing local files
[01:24:01] Completed 0 out of 250000 steps  (0 percent)
[01:49:12] Writing local files
[01:49:12] Completed 2500 out of 250000 steps  (1 percent)
[02:14:17] Writing local files
[02:14:17] Completed 5000 out of 250000 steps  (2 percent)
[02:39:14] Writing local files
[02:39:14] Completed 7500 out of 250000 steps  (3 percent)
[03:04:24] Writing local files
[03:04:24] Completed 10000 out of 250000 steps  (4 percent)
[03:29:19] Writing local files
[03:29:19] Completed 12500 out of 250000 steps  (5 percent)
[03:54:14] Writing local files
[03:54:14] Completed 15000 out of 250000 steps  (6 percent)
[04:19:08] Writing local files
[04:19:08] Completed 17500 out of 250000 steps  (7 percent)
[04:23:39] - Autosending finished units... [October 3 04:23:39 UTC]
[04:23:39] Trying to send all finished work units
[04:23:39] + No unsent completed units remaining.
[04:23:39] - Autosend completed
[04:44:02] Writing local files
[04:44:03] Completed 20000 out of 250000 steps  (8 percent)
[05:08:58] Writing local files
[05:08:58] Completed 22500 out of 250000 steps  (9 percent)
[05:33:51] Writing local files
[05:33:52] Completed 25000 out of 250000 steps  (10 percent)
[05:58:46] Writing local files
[05:58:47] Completed 27500 out of 250000 steps  (11 percent)
[06:23:42] Writing local files
[06:23:43] Completed 30000 out of 250000 steps  (12 percent)
[06:48:36] Writing local files
[06:48:36] Completed 32500 out of 250000 steps  (13 percent)
[07:13:30] Writing local files
[07:13:31] Completed 35000 out of 250000 steps  (14 percent)
[07:38:25] Writing local files
[07:38:26] Completed 37500 out of 250000 steps  (15 percent)
[08:03:21] Writing local files
[08:03:21] Completed 40000 out of 250000 steps  (16 percent)
[08:28:15] Writing local files
[08:28:15] Completed 42500 out of 250000 steps  (17 percent)
[08:53:36] Writing local files
[08:53:36] Completed 45000 out of 250000 steps  (18 percent)
[09:16:00] Writing local files
[09:16:00] Completed 47500 out of 250000 steps  (19 percent)
[09:37:38] Writing local files
[09:37:38] Completed 50000 out of 250000 steps  (20 percent)
[09:59:14] Writing local files
[09:59:14] Completed 52500 out of 250000 steps  (21 percent)
[10:20:52] Writing local files
[10:20:52] Completed 55000 out of 250000 steps  (22 percent)
[10:23:38] - Autosending finished units... [October 3 10:23:38 UTC]
[10:23:38] Trying to send all finished work units
[10:23:38] + No unsent completed units remaining.
[10:23:38] - Autosend completed
[10:42:29] Writing local files
[10:42:29] Completed 57500 out of 250000 steps  (23 percent)
[11:04:06] Writing local files
[11:04:06] Completed 60000 out of 250000 steps  (24 percent)
[11:25:39] Writing local files
[11:25:39] Completed 62500 out of 250000 steps  (25 percent)
[11:36:41] Warning:  long 1-4 interactions
[11:36:42] Quit 101 - NaN detected: (ener[20])
[11:36:42] 
[11:36:42] Simulation instability has been encountered. The run has entered a
[11:36:42]   state from which no further progress can be made.
[11:36:42] This may be the correct result of the simulation, however if you
[11:36:42]   often see other project units terminating early like this
[11:36:42]   too, you may wish to check the stability of your computer (issues
[11:36:42]   such as high temperature, overclocking, etc.).
[11:36:42] Going to send back what have done.
[11:36:42] logfile size: 9422
[11:36:42] - Writing 9972 bytes of core data to disk...
[11:36:42]   ... Done.
[11:36:42] - Failed to delete work/wudata_05.arc
[11:36:42] Warning:  check for stray files
[11:38:42] 
[11:38:42] Folding@home Core Shutdown: EARLY_UNIT_END
[11:38:42] 
[11:38:42] Folding@home Core Shutdown: EARLY_UNIT_END
[11:38:46] CoreStatus = 7B (123)
[11:38:46] Client-core communications error: ERROR 0x7b
[11:38:46] Deleting current work unit & continuing...
[11:38:46] Using generic mpiexec calls
[11:40:48] - Warning: Could not delete all work unit files (5): Core returned invalid code
[11:40:48] Trying to send all finished work units
[11:40:48] + No unsent completed units remaining.
[11:40:48] - Preparing to get new work unit...
[11:40:48] + Attempting to get work packet
[11:40:48] - Will indicate memory of 3070 MB
[11:40:48] - Connecting to assignment server
[11:40:48] Connecting to http://assign.stanford.edu:8080/
[11:40:48] Posted data.
[11:40:48] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[11:40:48] + News From Folding@Home: Welcome to Folding@Home
[11:40:49] Loaded queue successfully.
[11:40:49] Connecting to http://171.64.65.64:8080/
[11:40:54] Posted data.
[11:40:54] Initial: 0000; - Receiving payload (expected size: 4684476)
[11:41:05] - Downloaded at ~415 kB/s
[11:41:05] - Averaged speed for that direction ~321 kB/s
[11:41:05] + Received work.
[11:41:06] + Closed connections
[11:41:11] 
[11:41:11] + Processing work unit
[11:41:11] Work type a1 not eligible for variable processors
[11:41:11] Core required: FahCore_a1.exe
[11:41:11] Core found.
[11:41:11] Using generic mpiexec calls
[11:41:11] Working on queue slot 06 [October 3 11:41:11 UTC]
[11:41:11] + Working ...
[11:41:11] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe -dir work/ -suffix 06 -checkpoint 30 -verbose -lifeline 5204 -version 622'

[11:41:11] 
[11:41:11] *------------------------------*
[11:41:11] Folding@Home Gromacs SMP Core
[11:41:11] Version 1.74 (March 10, 2007)
[11:41:11] 
[11:41:11] Preparing to commence simulation
[11:41:11] - Ensuring status. Please wait.
[11:41:17] - Starting from initial work packet
[11:41:18] 
[11:41:18] Project: 2665 (Run 0, Clone 545, Gen 48)
[11:41:18] 
[11:41:18] Assembly optimizations on if available.
[11:41:18] Entering M.D.
[11:41:42]  percent)
[11:41:42] - Starting from initial work packet
[11:41:42] 
[11:41:42] Project: 2665 (Run 0, Clone 545, Gen 48)
[11:41:42] 
[11:41:42] Entering M.D.
[11:41:53] Rejecting checkpoint
[11:41:55] 
[11:41:55] Writing local files
[11:41:56] 
[11:41:56] Writing local files
[11:42:08] Extra SSE boost OK.
[11:42:08] Writing local files
[11:42:09] Completed 0 out of 250000 steps  (0 percent)
[12:05:00] Writing local files
[12:05:00] Completed 2500 out of 250000 steps  (1 percent)
...
[20:47:19] Completed 60000 out of 250000 steps  (24 percent)
[21:10:15] Writing local files
[21:10:16] Completed 62500 out of 250000 steps  (25 percent)
[21:22:04] Warning:  long 1-4 interactions
[21:22:04] Quit 101 - NaN detected: (ener[20])
[21:22:04] 
[21:22:04] Simulation instability has been encountered. The run has entered a
[21:22:04]   state from which no further progress can be made.
[21:22:04] This may be the correct result of the simulation, however if you
[21:22:04]   often see other project units terminating early like this
[21:22:04]   too, you may wish to check the stability of your computer (issues
[21:22:04]   such as high temperature, overclocking, etc.).
[21:22:04] Going to send back what have done.
[21:22:04] logfile size: 56168
[21:22:04] - Writing 56718 bytes of core data to disk...
[21:22:04]   ... Done.
[21:24:04] 
[21:24:04] Folding@home Core Shutdown: EARLY_UNIT_END
[21:24:04] 
[21:24:04] Folding@home Core Shutdown: EARLY_UNIT_END
[21:24:07] CoreStatus = 7B (123)
[21:24:07] Client-core communications error: ERROR 0x7b
[21:24:07] Deleting current work unit & continuing...
[21:24:07] Using generic mpiexec calls
[21:26:09] - Warning: Could not delete all work unit files (6): Core returned invalid code
[21:26:09] Trying to send all finished work units
[21:26:09] + No unsent completed units remaining.
[21:26:09] - Preparing to get new work unit...
[21:26:09] + Attempting to get work packet
[21:26:09] - Will indicate memory of 3070 MB
[21:26:09] - Connecting to assignment server
[21:26:09] Connecting to http://assign.stanford.edu:8080/
[21:26:10] Posted data.
[21:26:10] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[21:26:10] + News From Folding@Home: Welcome to Folding@Home
[21:26:10] Loaded queue successfully.
[21:26:10] Connecting to http://171.64.65.64:8080/
[21:26:15] Posted data.
[21:26:15] Initial: 0000; - Receiving payload (expected size: 4684476)
[21:26:41] - Downloaded at ~175 kB/s
[21:26:41] - Averaged speed for that direction ~292 kB/s
[21:26:41] + Received work.
[21:26:41] + Closed connections
[21:26:46] 
[21:26:46] + Processing work unit
[21:26:46] Work type a1 not eligible for variable processors
[21:26:46] Core required: FahCore_a1.exe
[21:26:46] Core found.
[21:26:46] Using generic mpiexec calls
[21:26:46] Working on queue slot 07 [October 3 21:26:46 UTC]
[21:26:46] + Working ...
[21:26:46] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe -dir work/ -suffix 07 -checkpoint 30 -verbose -lifeline 5204 -version 622'

[21:26:46] 
[21:26:46] *------------------------------*
[21:26:46] Folding@Home Gromacs SMP Core
[21:26:46] Version 1.74 (March 10, 2007)
[21:26:46] 
[21:26:46] Preparing to commence simulation
[21:26:46] - Ensuring status. Please wait.
[21:26:53] - Starting from initial work packet
[21:26:53] 
[21:26:53] Project: 2665 (Run 0, Clone 545, Gen 48)
[21:26:53] 
[21:26:53] Assembly optimizations on if available.
[21:26:53] Entering M.D.
[21:27:13] al work packet
[21:27:13] 
[21:27:13] Project: 2665 (Run 0, Clone 545, Gen 48)
[21:27:13] 
[21:27:13] Entering M.D.
[21:27:24] ne 545, Gen 48)
[21:27:24] 
[21:27:25] Entering M.D.
[21:27:31] Rejecting checkpoint
[21:27:34] Protein: HGG in water
[21:27:34] Writing local files
[21:27:47] Extra SSE boost OK.
[21:27:47] Writing local files
[21:27:48] Completed 0 out of 250000 steps  (0 percent)
[21:52:39] Writing local files
[21:52:39] Completed 2500 out of 250000 steps  (1 percent)
[22:17:31] Writing local files
[22:17:32] Completed 5000 out of 250000 steps  (2 percent)
[22:42:24] Writing local files
...
[01:37:17] Writing local files
[01:37:18] Completed 25000 out of 250000 steps  (10 percent)
[02:02:16] Writing local files
[02:02:16] Completed 27500 out of 250000 steps  (11 percent)
[02:25:11] Killing all core threads
[02:25:11] Killing 4 cores
[02:25:11] Killing core 0
[02:25:11] Killing core 1
[02:25:11] Killing core 2
[02:25:11] Killing core 3

Folding@Home Client Shutdown at user request.
[02:25:11] ***** Got a SIGTERM signal (2)
[02:25:11] Killing all core threads
[02:25:11] Killing 4 cores
[02:25:11] Killing core 0
[02:25:11] Killing core 1
[02:25:11] Killing core 2
[02:25:11] Killing core 3

Folding@Home Client Shutdown.

... Manually shutdown and deleted core to try and get 1.76 core to help fix this problem. Didn't know yet that this won't help because 1.76 is Deino and I'm MPICH 1.74 ...

--- Opening Log file [October 4 02:34:03 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.22 SMP Beta2r3

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\GatoPrimo\Fah2ndSmpClient
Executable: C:\Users\GatoPrimo\Fah2ndSmpClient\Folding@home-Win32-x86.exe
Arguments: -smp -verbosity 9 

[02:34:03] - Ask before connecting: No
[02:34:03] - User name: [EV]LithiumSmp (Team 104636)
[02:34:03] - User ID: C7BCBFB2C868C07
[02:34:03] - Machine ID: 3
[02:34:03] 
[02:34:03] Loaded queue successfully.
[02:34:03] 
[02:34:03] - Autosending finished units... [October 4 02:34:03 UTC]
[02:34:03] + Processing work unit
[02:34:03] Trying to send all finished work units
[02:34:03] Work type a1 not eligible for variable processors
[02:34:03] + No unsent completed units remaining.
[02:34:03] Core required: FahCore_a1.exe
[02:34:03] - Autosend completed
[02:34:03] Core not found.
[02:34:03] - Core is not present or corrupted.
[02:34:03] - Attempting to download new core...
[02:34:03] + Downloading new core: FahCore_a1.exe
[02:34:03] Downloading core (/~pande/Win32/x86/Core_a1.fah from www.stanford.edu)
[02:34:03] Initial: AFDE; + 10240 bytes downloaded
[02:34:03] Initial: AD21; + 20480 bytes downloaded
...
[02:34:06] Initial: DD6C; + 788480 bytes downloaded
[02:34:06] Initial: D2E9; + 789667 bytes downloaded
[02:34:06] Verifying core Core_a1.fah...
[02:34:06] Signature is VALID
[02:34:06] 
[02:34:06] Trying to unzip core FahCore_a1.exe
[02:34:06] Decompressed FahCore_a1.exe (2035712 bytes) successfully
[02:34:11] + Core successfully engaged
[02:34:16] 
[02:34:16] + Processing work unit
[02:34:16] Work type a1 not eligible for variable processors
[02:34:16] Core required: FahCore_a1.exe
[02:34:16] Core found.
[02:34:16] Using generic mpiexec calls
[02:34:16] Working on queue slot 07 [October 4 02:34:16 UTC]
[02:34:16] + Working ...
[02:34:16] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe -dir work/ -suffix 07 -checkpoint 30 -verbose -lifeline 4872 -version 622'

[02:34:17] 
[02:34:17] *------------------------------*
[02:34:17] Folding@Home Gromacs SMP Core
[02:34:17] Version 1.74 (March 10, 2007)
[02:34:17] 
[02:34:17] Preparing to commence simulation
[02:34:17] - Ensuring status. Please wait.
[02:34:34] - Looking at optimizations...
[02:34:34] - Working with standard loops on this execution.
[02:34:34] - Previous termination of core was improper.
[02:34:34] - Going to use standard loops.
[02:34:34] - Files status OK
[02:34:54] - Expanded 4683964 -> 24426905 (decompressed 521.5 percent)
[02:34:57] 
[02:34:57] Project: 2665 (Run 0, Clone 545, Gen 48)
[02:34:57] 
[02:35:00] Entering M.D.
[02:35:06] Calling FAH init
[02:35:08] ater
[02:35:08] Writing local files
[02:35:08] rom checkpoint)
[02:35:08] Read checkpoint
[02:35:08] Protein: HGG in water
[02:35:09] Writing local files
[02:35:09] Completed 27500 out of 250000 steps  (11 percent)
[02:35:19] Extra SSE boost OK.
[02:57:23] Writing local files
[02:57:24] Completed 30000 out of 250000 steps  (12 percent)
...
[15:50:40] Writing local files
[15:50:41] Completed 120000 out of 250000 steps  (48 percent)
[16:12:19] Writing local files
[16:12:20] Completed 122500 out of 250000 steps  (49 percent)
[16:26:57] Warning:  long 1-4 interactions
[16:26:57] Quit 101 - NaN detected: (ener[20])
[16:26:57] 
[16:26:57] Simulation instability has been encountered. The run has entered a
[16:26:57]   state from which no further progress can be made.
[16:26:57] This may be the correct result of the simulation, however if you
[16:26:57]   often see other project units terminating early like this
[16:26:57]   too, you may wish to check the stability of your computer (issues
[16:26:57]   such as high temperature, overclocking, etc.).
[16:26:57] Going to send back what have done.
[16:26:57] logfile size: 110079
[16:26:57] - Writing 110629 bytes of core data to disk...
[16:26:57]   ... Done.
[16:26:57] - Failed to delete work/wudata_07.arc
[16:26:57] Warning:  check for stray files
[16:26:57] 
[16:26:57] Folding@home Core Shutdown: EARLY_UNIT_END
[16:26:57] 
[16:26:57] Folding@home Core Shutdown: EARLY_UNIT_END
[16:27:01] CoreStatus = 7B (123)
[16:27:01] Client-core communications error: ERROR 0x7b
[16:27:01] Deleting current work unit & continuing...
[16:27:01] Using generic mpiexec calls
[16:29:03] - Warning: Could not delete all work unit files (7): Core returned invalid code
[16:29:03] Trying to send all finished work units
[16:29:03] + No unsent completed units remaining.
[16:29:03] - Preparing to get new work unit...
[16:29:03] + Attempting to get work packet
[16:29:03] - Will indicate memory of 3070 MB
[16:29:03] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 11
[16:29:03] - Connecting to assignment server
[16:29:03] Connecting to http://assign.stanford.edu:8080/
[16:29:04] Posted data.
[16:29:04] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[16:29:04] + News From Folding@Home: Welcome to Folding@Home
[16:29:04] Loaded queue successfully.
[16:29:04] Connecting to http://171.64.65.64:8080/
[16:29:10] Posted data.
[16:29:10] Initial: 0000; - Receiving payload (expected size: 4684476)
[16:29:25] - Downloaded at ~304 kB/s
[16:29:25] - Averaged speed for that direction ~295 kB/s
[16:29:25] + Received work.
[16:29:25] + Closed connections
[16:29:30] 
[16:29:30] + Processing work unit
[16:29:30] Work type a1 not eligible for variable processors
[16:29:30] Core required: FahCore_a1.exe
[16:29:30] Core found.
[16:29:30] Using generic mpiexec calls
[16:29:30] Working on queue slot 08 [October 4 16:29:30 UTC]
[16:29:30] + Working ...
[16:29:30] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe -dir work/ -suffix 08 -checkpoint 30 -verbose -lifeline 4872 -version 622'

[16:29:30] 
[16:29:30] *------------------------------*
[16:29:30] Folding@Home Gromacs SMP Core
[16:29:30] Version 1.74 (March 10, 2007)
[16:29:30] 
[16:29:30] Preparing to commence simulation
[16:29:30] - Ensuring status. Please wait.
[16:29:38] - Starting from initial work packet
[16:29:38] 
[16:29:38] Project: 2665 (Run 0, Clone 545, Gen 48)
[16:29:38] 
[16:29:38] Assembly optimizations on if available.
[16:29:38] Entering M.D.
[16:29:58] al work packet
[16:29:58] 
[16:29:58] Project: 2665 (Run 0, Clone 545, Gen 48)
[16:29:58] 
[16:29:58] Entering M.D.
[16:30:09] ne 545, Gen 48)
[16:30:09] 
[16:30:10] Entering M.D.
[16:30:16] Rejecting checkpoint
[16:30:18] Protein: HGG in water
[16:30:18] Writing local files
[16:30:31] Extra SSE boost OK.
[16:30:32] Writing local files
[16:30:32] Completed 0 out of 250000 steps  (0 percent)
[16:55:28] Writing local files
[16:55:28] Completed 2500 out of 250000 steps  (1 percent)
[17:20:19] Writing local files
[17:20:20] Completed 5000 out of 250000 steps  (2 percent)
...
[[01:13:16] Writing local files
[01:13:17] Completed 52500 out of 250000 steps  (21 percent)
[01:38:12] Writing local files
[01:38:12] Completed 55000 out of 250000 steps  (22 percent)
[02:03:05] Writing local files
[02:03:05] Completed 57500 out of 250000 steps  (23 percent)
[02:27:59] Writing local files
[02:27:59] Completed 60000 out of 250000 steps  (24 percent)
[02:34:03] - Autosending finished units... [October 5 02:34:03 UTC]
[02:34:03] Trying to send all finished work units
[02:34:03] + No unsent completed units remaining.
[02:34:03] - Autosend completed
[02:52:41] Writing local files
[02:52:41] Completed 62500 out of 250000 steps  (25 percent)
[03:05:23] Warning:  long 1-4 interactions
[03:05:23] Quit 101 - NaN detected: (ener[20])
[03:05:23] 
[03:05:23] Simulation instability has been encountered. The run has entered a
[03:05:23]   state from which no further progress can be made.
[03:05:23] This may be the correct result of the simulation, however if you
[03:05:23]   often see other project units terminating early like this
[03:05:23]   too, you may wish to check the stability of your computer (issues
[03:05:23]   such as high temperature, overclocking, etc.).
[03:05:23] Going to send back what have done.
[03:05:23] logfile size: 56168
[03:05:23] - Writing 56718 bytes of core data to disk...
[03:05:23]   ... Done.
[03:05:23] - Failed to delete work/wudata_08.arc
[03:05:23] Warning:  check for stray files
[03:07:23] 
[03:07:23] Folding@home Core Shutdown: EARLY_UNIT_END
[03:07:23] 
[03:07:23] Folding@home Core Shutdown: EARLY_UNIT_END
[03:07:26] CoreStatus = 7B (123)
[03:07:26] Client-core communications error: ERROR 0x7b
[03:07:26] Deleting current work unit & continuing...
[03:07:26] Using generic mpiexec calls
[03:09:29] - Warning: Could not delete all work unit files (8): Core returned invalid code
[03:09:29] Trying to send all finished work units
[03:09:29] + No unsent completed units remaining.
[03:09:29] - Preparing to get new work unit...
[03:09:29] + Attempting to get work packet
[03:09:29] - Will indicate memory of 3070 MB
[03:09:29] - Connecting to assignment server
[03:09:29] Connecting to http://assign.stanford.edu:8080/
[03:09:29] Posted data.
[03:09:29] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[03:09:29] + News From Folding@Home: Welcome to Folding@Home
[03:09:29] Loaded queue successfully.
[03:09:29] Connecting to http://171.64.65.64:8080/
[03:09:35] Posted data.
[03:09:35] Initial: 0000; - Receiving payload (expected size: 4684476)
[03:09:48] - Downloaded at ~351 kB/s
[03:09:48] - Averaged speed for that direction ~306 kB/s
[03:09:48] + Received work.
[03:09:48] + Closed connections
[03:09:53] 
[03:09:53] + Processing work unit
[03:09:53] Work type a1 not eligible for variable processors
[03:09:53] Core required: FahCore_a1.exe
[03:09:53] Core found.
[03:09:53] Using generic mpiexec calls
[03:09:53] Working on queue slot 09 [October 5 03:09:53 UTC]
[03:09:53] + Working ...
[03:09:53] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe -dir work/ -suffix 09 -checkpoint 30 -verbose -lifeline 4872 -version 622'

[03:09:53] 
[03:09:53] *------------------------------*
[03:09:53] Folding@Home Gromacs SMP Core
[03:09:53] Version 1.74 (March 10, 2007)
[03:09:53] 
[03:09:53] Preparing to commence simulation
[03:09:53] - Ensuring status. Please wait.
[03:10:00] - Starting from initial work packet
[03:10:00] 
[03:10:00] Project: 2665 (Run 0, Clone 545, Gen 48)
[03:10:00] 
[03:10:01] Assembly optimizations on if available.
[03:10:01] Entering M.D.
[03:10:20]  percent)
[03:10:20] - Starting from initial work packet
[03:10:20] 
[03:10:20] Project: 2665 (Run 0, Clone 545, Gen 48)
[03:10:20] 
[03:10:20] Entering M.D.
[03:10:38] Rejecting checkpoint
[03:10:40] Protein: HGG in water
[03:10:40] Writing local files
[03:10:51] Extra SSE boost OK.
[03:10:51] Writing local files
[03:10:51] Completed 0 out of 250000 steps  (0 percent)
[03:32:28] Writing local files
[03:32:28] Completed 2500 out of 250000 steps  (1 percent)
[03:54:06] Writing local files
[03:54:06] Completed 5000 out of 250000 steps  (2 percent)
[04:15:45] Writing local files
[04:15:45] Completed 7500 out of 250000 steps  (3 percent)
[04:37:24] Writing local files
[04:37:24] Completed 10000 out of 250000 steps  (4 percent)
[04:59:03] Writing local files
[04:59:03] Completed 12500 out of 250000 steps  (5 percent)
[05:20:38] Writing local files
[05:20:39] Completed 15000 out of 250000 steps  (6 percent)
[05:42:17] Writing local files
[05:42:17] Completed 17500 out of 250000 steps  (7 percent)
[06:03:55] Writing local files
[06:03:55] Completed 20000 out of 250000 steps  (8 percent)
[06:25:35] Writing local files
[06:25:36] Completed 22500 out of 250000 steps  (9 percent)
[06:47:15] Writing local files
[06:47:15] Completed 25000 out of 250000 steps  (10 percent)
[07:08:53] Writing local files
[07:08:53] Completed 27500 out of 250000 steps  (11 percent)
[07:30:30] Writing local files
[07:30:30] Completed 30000 out of 250000 steps  (12 percent)
[07:52:11] Writing local files
[07:52:11] Completed 32500 out of 250000 steps  (13 percent)
[08:13:51] Writing local files
[08:13:51] Completed 35000 out of 250000 steps  (14 percent)
[08:34:03] - Autosending finished units... [October 5 08:34:03 UTC]
[08:34:03] Trying to send all finished work units
[08:34:03] + No unsent completed units remaining.
[08:34:03] - Autosend completed
[08:35:32] Writing local files
[08:35:32] Completed 37500 out of 250000 steps  (15 percent)
[08:57:12] Writing local files
[08:57:12] Completed 40000 out of 250000 steps  (16 percent)
[09:18:51] Writing local files
[09:18:52] Completed 42500 out of 250000 steps  (17 percent)
[09:40:32] Writing local files
[09:40:32] Completed 45000 out of 250000 steps  (18 percent)
[10:02:08] Writing local files
[10:02:09] Completed 47500 out of 250000 steps  (19 percent)
[10:23:48] Writing local files
[10:23:48] Completed 50000 out of 250000 steps  (20 percent)
[10:45:31] Writing local files
[10:45:32] Completed 52500 out of 250000 steps  (21 percent)
[11:07:11] Writing local files
[11:07:11] Completed 55000 out of 250000 steps  (22 percent)
[11:28:50] Writing local files
[11:28:51] Completed 57500 out of 250000 steps  (23 percent)
[11:50:33] Writing local files
[11:50:33] Completed 60000 out of 250000 steps  (24 percent)
[12:12:09] Writing local files
[12:12:09] Completed 62500 out of 250000 steps  (25 percent)
[12:23:13] Warning:  long 1-4 interactions
[12:23:13] Quit 101 - NaN detected: (ener[20])
[12:23:13] 
[12:23:13] Simulation instability has been encountered. The run has entered a
[12:23:13]   state from which no further progress can be made.
[12:23:13] This may be the correct result of the simulation, however if you
[12:23:13]   often see other project units terminating early like this
[12:23:13]   too, you may wish to check the stability of your computer (issues
[12:23:13]   such as high temperature, overclocking, etc.).
[12:23:13] Going to send back what have done.
[12:23:13] logfile size: 0
[12:23:13] Warning: Core could not open logfile.
[12:23:13] - Writing 550 bytes of core data to disk...
[12:23:13]   ... Done.
[12:23:13] - Failed to delete work/wudata_09.arc
[12:23:14] Warning:  check for stray files
[12:25:14] 
[12:25:14] Folding@home Core Shutdown: EARLY_UNIT_END
[12:25:14] 
[12:25:14] Folding@home Core Shutdown: EARLY_UNIT_END
[12:25:17] CoreStatus = 7B (123)
[12:25:17] Client-core communications error: ERROR 0x7b
[12:25:17] - Attempting to download new core...
[12:25:17] + Downloading new core: FahCore_a1.exe
[12:25:17] Downloading core (/~pande/Win32/x86/Core_a1.fah from www.stanford.edu)
[12:25:17] Initial: AFDE; + 10240 bytes downloaded
[12:25:17] Initial: AD21; + 20480 bytes downloaded
...
[12:25:19] Initial: DD6C; + 788480 bytes downloaded
[12:25:19] Initial: D2E9; + 789667 bytes downloaded
[12:25:19] Verifying core Core_a1.fah...
[12:25:19] Signature is VALID
[12:25:19] 
[12:25:19] Trying to unzip core FahCore_a1.exe
[12:25:19] Decompressed FahCore_a1.exe (2035712 bytes) successfully
[12:25:24] + Core successfully engaged
[12:25:24] Deleting current work unit & continuing...
[12:25:24] Using generic mpiexec calls
[12:27:27] - Warning: Could not delete all work unit files (9): Core returned invalid code
[12:27:27] Trying to send all finished work units
[12:27:27] + No unsent completed units remaining.
[12:27:27] - Preparing to get new work unit...
[12:27:27] + Attempting to get work packet
[12:27:27] - Will indicate memory of 3070 MB
[12:27:27] - Connecting to assignment server
[12:27:27] Connecting to http://assign.stanford.edu:8080/
[12:27:27] Posted data.
[12:27:27] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[12:27:27] + News From Folding@Home: Welcome to Folding@Home
[12:27:27] Loaded queue successfully.
[12:27:27] Connecting to http://171.64.65.64:8080/
[12:27:32] Posted data.
[12:27:32] Initial: 0000; - Receiving payload (expected size: 4684476)
[12:27:45] - Downloaded at ~351 kB/s
[12:27:45] - Averaged speed for that direction ~315 kB/s
[12:27:45] + Received work.
[12:27:45] + Closed connections
[12:27:50] 
[12:27:50] + Processing work unit
[12:27:50] Work type a1 not eligible for variable processors
[12:27:50] Core required: FahCore_a1.exe
[12:27:50] Core found.
[12:27:50] Using generic mpiexec calls
[12:27:50] Working on queue slot 00 [October 5 12:27:50 UTC]
[12:27:50] + Working ...
[12:27:50] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe -dir work/ -suffix 00 -checkpoint 30 -verbose -lifeline 4872 -version 622'

[12:27:50] 
[12:27:50] *------------------------------*
[12:27:50] Folding@Home Gromacs SMP Core
[12:27:50] Version 1.74 (March 10, 2007)
[12:27:50] 
[12:27:50] Preparing to commence simulation
[12:27:50] ed dyn
[12:27:50] - Files status OK
[12:27:57] - Expanded 4683964 -> 24426905 (decompressed 521.5 percent)
[12:27:57] - Starting from initial work packet
[12:27:57] 
[12:27:57] Project: 2665 (Run 0, Clone 545, Gen 48)
[12:27:57] 
[12:27:58] Assembly optimizations on if available.
[12:27:58] Entering M.D.
[12:28:17] al work packet
[12:28:17] 
[12:28:17] Project: 2665 (Run 0, Clone 545, Gen 48)
[12:28:17] 
[12:28:17] Entering M.D.
[12:28:26] ne 545, Gen 48)
[12:28:26] 
[12:28:27] Entering M.D.
[12:28:35] GG in water
[12:28:35] Writing local files
[12:28:35] cal files
[12:28:37] Extra SSE boost OK.
[12:28:46] cal files
[12:28:46] Completed 0 out of 250000 steps  (0 percent)
[12:53:32] Writing local files
[12:53:33] Completed 2500 out of 250000 steps  (1 percent)
[13:18:19] Writing local files
[13:18:19] Completed 5000 out of 250000 steps  (2 percent)
[13:43:07] Writing local files
[13:43:08] Completed 7500 out of 250000 steps  (3 percent)
[14:07:57] Writing local files
[14:07:57] Completed 10000 out of 250000 steps  (4 percent)
[14:32:44] Writing local files
[14:32:44] Completed 12500 out of 250000 steps  (5 percent)
[14:34:03] - Autosending finished units... [October 5 14:34:03 UTC]
[14:34:03] Trying to send all finished work units
[14:34:03] + No unsent completed units remaining.
[14:34:03] - Autosend completed
[14:57:34] Writing local files
[14:57:34] Completed 15000 out of 250000 steps  (6 percent)
[15:22:22] Writing local files
[15:22:22] Completed 17500 out of 250000 steps  (7 percent)
[15:47:12] Writing local files
[15:47:12] Completed 20000 out of 250000 steps  (8 percent)
[16:12:01] Writing local files
[16:12:01] Completed 22500 out of 250000 steps  (9 percent)
[16:36:50] Writing local files
[16:36:50] Completed 25000 out of 250000 steps  (10 percent)
[17:01:35] Writing local files
[17:01:35] Completed 27500 out of 250000 steps  (11 percent)
[17:26:23] Writing local files
[17:26:23] Completed 30000 out of 250000 steps  (12 percent)
[17:51:11] Writing local files
[17:51:11] Completed 32500 out of 250000 steps  (13 percent)
[18:15:59] Writing local files
[18:15:59] Completed 35000 out of 250000 steps  (14 percent)
[18:40:46] Writing local files
[18:40:47] Completed 37500 out of 250000 steps  (15 percent)
[19:05:33] Writing local files
[19:05:33] Completed 40000 out of 250000 steps  (16 percent)
[19:30:20] Writing local files
[19:30:20] Completed 42500 out of 250000 steps  (17 percent)
[19:55:07] Writing local files
[19:55:07] Completed 45000 out of 250000 steps  (18 percent)
[20:19:54] Writing local files
[20:19:54] Completed 47500 out of 250000 steps  (19 percent)
[20:34:03] - Autosending finished units... [October 5 20:34:03 UTC]
[20:34:03] Trying to send all finished work units
[20:34:03] + No unsent completed units remaining.
[20:34:03] - Autosend completed
[20:44:40] Writing local files
[20:44:40] Completed 50000 out of 250000 steps  (20 percent)
[21:09:28] Writing local files
[21:09:29] Completed 52500 out of 250000 steps  (21 percent)
[21:34:16] Writing local files
[21:34:16] Completed 55000 out of 250000 steps  (22 percent)
[21:59:03] Writing local files
[21:59:03] Completed 57500 out of 250000 steps  (23 percent)
[22:23:50] Writing local files
[22:23:51] Completed 60000 out of 250000 steps  (24 percent)
[22:48:39] Writing local files
[22:48:39] Completed 62500 out of 250000 steps  (25 percent)
[23:01:18] Warning:  long 1-4 interactions
[23:01:19] Quit 101 - NaN detected: (ener[20])
[23:01:19] 
[23:01:19] Simulation instability has been encountered. The run has entered a
[23:01:19]   state from which no further progress can be made.
[23:01:19] This may be the correct result of the simulation, however if you
[23:01:19]   often see other project units terminating early like this
[23:01:19]   too, you may wish to check the stability of your computer (issues
[23:01:19]   such as high temperature, overclocking, etc.).
[23:01:19] Going to send back what have done.
[23:01:19] logfile size: 0
[23:01:19] Warning: Core could not open logfile.
[23:01:19] - Writing 550 bytes of core data to disk...
[23:01:19]   ... Done.
[23:01:19] - Failed to delete work/wudata_00.arc
[23:01:19] No C.P. to delete.
[23:01:19] Warning:  check for stray files
[23:03:19] 
[23:03:19] Folding@home Core Shutdown: EARLY_UNIT_END
[23:03:19] 
[23:03:19] Folding@home Core Shutdown: EARLY_UNIT_END
[23:03:21] CoreStatus = 7B (123)
[23:03:21] Client-core communications error: ERROR 0x7b
[23:03:21] Deleting current work unit & continuing...
[23:03:21] Using generic mpiexec calls
[23:05:24] - Warning: Could not delete all work unit files (0): Core returned invalid code
[23:05:24] Trying to send all finished work units
[23:05:24] + No unsent completed units remaining.
[23:05:24] - Preparing to get new work unit...
[23:05:24] + Attempting to get work packet
[23:05:24] - Will indicate memory of 3070 MB
[23:05:24] - Connecting to assignment server
[23:05:24] Connecting to http://assign.stanford.edu:8080/
[23:05:24] Posted data.
[23:05:24] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[23:05:24] + News From Folding@Home: Welcome to Folding@Home
[23:05:24] Loaded queue successfully.
[23:05:24] Connecting to http://171.64.65.64:8080/
[23:05:29] Posted data.
[23:05:29] Initial: 0000; - Receiving payload (expected size: 4684476)
[23:05:42] - Downloaded at ~351 kB/s
[23:05:42] - Averaged speed for that direction ~322 kB/s
[23:05:42] + Received work.
[23:05:42] + Closed connections
[23:05:47] 
[23:05:47] + Processing work unit
[23:05:47] Work type a1 not eligible for variable processors
[23:05:47] Core required: FahCore_a1.exe
[23:05:47] Core found.
[23:05:47] Using generic mpiexec calls
[23:05:47] Working on queue slot 01 [October 5 23:05:47 UTC]
[23:05:47] + Working ...
[23:05:47] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe -dir work/ -suffix 01 -checkpoint 30 -verbose -lifeline 4872 -version 622'

[23:05:48] 
[23:05:48] *------------------------------*
[23:05:48] Folding@Home Gromacs SMP Core
[23:05:48] Version 1.74 (March 10, 2007)
[23:05:48] 
[23:05:48] Preparing to commence simulation
[23:05:48] - Ensuring status. Please wait.
[23:05:54] - Starting from initial work packet
[23:05:54] 
[23:05:54] Project: 2665 (Run 0, Clone 545, Gen 48)
[23:05:54] 
[23:05:55] Assembly optimizations on if available.
[23:05:55] Entering M.D.
[23:06:17]  percent)
[23:06:17] - Starting from initial work packet
[23:06:17] 
[23:06:17] Project: 2665 (Run 0, Clone 545, Gen 48)
[23:06:17] 
[23:06:17] Entering M.D.
[23:06:33] GG in water
[23:06:33] Writing local files
[23:06:33] cal files
[23:06:34] Extra SSE boost OK.
[23:06:47] cal files
[23:06:48] Completed 0 out of 250000 steps  (0 percent)
[23:31:38] Writing local files
[23:31:38] Completed 2500 out of 250000 steps  (1 percent)
[23:56:25] Writing local files
[23:56:25] Completed 5000 out of 250000 steps  (2 percent)
[00:21:14] Writing local files
[00:21:14] Completed 7500 out of 250000 steps  (3 percent)
[00:46:06] Writing local files
[00:46:06] Completed 10000 out of 250000 steps  (4 percent)
[01:10:56] Writing local files
[01:10:56] Completed 12500 out of 250000 steps  (5 percent)
[01:35:46] Writing local files
[01:35:46] Completed 15000 out of 250000 steps  (6 percent)
[02:00:35] Writing local files
[02:00:35] Completed 17500 out of 250000 steps  (7 percent)
[02:25:25] Writing local files
[02:25:25] Completed 20000 out of 250000 steps  (8 percent)
[02:34:03] - Autosending finished units... [October 6 02:34:03 UTC]
[02:34:03] Trying to send all finished work units
[02:34:03] + No unsent completed units remaining.
[02:34:03] - Autosend completed
[02:50:16] Writing local files
[02:50:16] Completed 22500 out of 250000 steps  (9 percent)
[03:15:06] Writing local files
[03:15:07] Completed 25000 out of 250000 steps  (10 percent)
[03:39:56] Writing local files
[03:39:56] Completed 27500 out of 250000 steps  (11 percent)
[04:04:46] Writing local files
[04:04:46] Completed 30000 out of 250000 steps  (12 percent)
[04:29:15] Writing local files
[04:29:15] Completed 32500 out of 250000 steps  (13 percent)
[04:53:22] Writing local files
[04:53:22] Completed 35000 out of 250000 steps  (14 percent)
[05:17:28] Writing local files
[05:17:28] Completed 37500 out of 250000 steps  (15 percent)
[05:41:34] Writing local files
[05:41:35] Completed 40000 out of 250000 steps  (16 percent)
[06:05:42] Writing local files
[06:05:42] Completed 42500 out of 250000 steps  (17 percent)
[06:29:47] Writing local files
[06:29:48] Completed 45000 out of 250000 steps  (18 percent)
[06:54:34] Writing local files
[06:54:34] Completed 47500 out of 250000 steps  (19 percent)
[07:19:24] Writing local files
[07:19:24] Completed 50000 out of 250000 steps  (20 percent)
[07:44:14] Writing local files
[07:44:14] Completed 52500 out of 250000 steps  (21 percent)
[08:09:05] Writing local files
[08:09:05] Completed 55000 out of 250000 steps  (22 percent)
[08:33:54] Writing local files
[08:33:55] Completed 57500 out of 250000 steps  (23 percent)
[08:34:03] - Autosending finished units... [October 6 08:34:03 UTC]
[08:34:03] Trying to send all finished work units
[08:34:03] + No unsent completed units remaining.
[08:34:03] - Autosend completed
[08:58:45] Writing local files
[08:58:45] Completed 60000 out of 250000 steps  (24 percent)
[09:23:35] Writing local files
[09:23:35] Completed 62500 out of 250000 steps  (25 percent)
[09:36:17] Warning:  long 1-4 interactions
[09:36:18] Quit 101 - NaN detected: (ener[20])
[09:36:18] 
[09:36:18] Simulation instability has been encountered. The run has entered a
[09:36:18]   state from which no further progress can be made.
[09:36:18] This may be the correct result of the simulation, however if you
[09:36:18]   often see other project units terminating early like this
[09:36:18]   too, you may wish to check the stability of your computer (issues
[09:36:18]   such as high temperature, overclocking, etc.).
[09:36:18] Going to send back what have done.
[09:36:18] logfile size: 0
[09:36:18] Warning: Core could not open logfile.
[09:36:18] - Writing 550 bytes of core data to disk...
[09:36:18]   ... Done.
[09:36:18] - Failed to delete work/wudata_01.arc
[09:36:18] No C.P. to delete.
[09:36:18] Warning:  check for stray files
[09:38:18] 
[09:38:18] Folding@home Core Shutdown: EARLY_UNIT_END
[09:38:18] 
[09:38:18] Folding@home Core Shutdown: EARLY_UNIT_END
[09:38:21] CoreStatus = 7B (123)
[09:38:21] Client-core communications error: ERROR 0x7b
[09:38:21] Deleting current work unit & continuing...
[09:38:21] Using generic mpiexec calls
[09:40:24] - Warning: Could not delete all work unit files (1): Core returned invalid code
[09:40:24] Trying to send all finished work units
[09:40:24] + No unsent completed units remaining.
[09:40:24] - Preparing to get new work unit...
[09:40:24] + Attempting to get work packet
[09:40:24] - Will indicate memory of 3070 MB
[09:40:24] - Connecting to assignment server
[09:40:24] Connecting to http://assign.stanford.edu:8080/
[09:40:24] Posted data.
[09:40:24] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[09:40:24] + News From Folding@Home: Welcome to Folding@Home
[09:40:25] Loaded queue successfully.
[09:40:25] Connecting to http://171.64.65.64:8080/
[09:40:30] Posted data.
[09:40:30] Initial: 0000; - Receiving payload (expected size: 4684476)
[09:40:43] - Downloaded at ~351 kB/s
[09:40:43] - Averaged speed for that direction ~328 kB/s
[09:40:43] + Received work.
[09:40:43] + Closed connections
[09:40:48] 
[09:40:48] + Processing work unit
[09:40:48] Work type a1 not eligible for variable processors
[09:40:48] Core required: FahCore_a1.exe
[09:40:48] Core found.
[09:40:48] Using generic mpiexec calls
[09:40:48] Working on queue slot 02 [October 6 09:40:48 UTC]
[09:40:48] + Working ...
[09:40:48] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe -dir work/ -suffix 02 -checkpoint 30 -verbose -lifeline 4872 -version 622'

[09:40:48] 
[09:40:48] *------------------------------*
[09:40:48] Folding@Home Gromacs SMP Core
[09:40:48] Version 1.74 (March 10, 2007)
[09:40:48] 
[09:40:48] Preparing to commence simulation
[09:40:48] - Ensuring status. Please wait.
[09:40:56] - Starting from initial work packet
[09:40:56] 
[09:40:56] Project: 2665 (Run 0, Clone 545, Gen 48)
[09:40:56] 
[09:40:56] Assembly optimizations on if available.
[09:40:56] Entering M.D.
[09:41:15] al work packet
[09:41:15] 
[09:41:15] Project: 2665 (Run 0, Clone 545, Gen 48)
[09:41:15] 
[09:41:16] Entering M.D.
[09:41:26] ne 545, Gen 48)
[09:41:26] 
[09:41:28] Entering M.D.
[09:41:33] Rejecting checkpoint
[09:41:36] Protein: HGG in water
[09:41:36] Writing local files
[09:41:49] Extra SSE boost OK.
[09:41:50] Writing local files
[09:41:50] Completed 0 out of 250000 steps  (0 percent)
[10:06:36] Writing local files
[10:06:36] Completed 2500 out of 250000 steps  (1 percent)
[10:31:22] Writing local files
[10:31:22] Completed 5000 out of 250000 steps  (2 percent)
[10:56:11] Writing local files
[10:56:12] Completed 7500 out of 250000 steps  (3 percent)
[11:20:58] Writing local files
[11:20:58] Completed 10000 out of 250000 steps  (4 percent)
[11:45:48] Writing local files
[11:45:48] Completed 12500 out of 250000 steps  (5 percent)
[12:10:35] Writing local files
[12:10:35] Completed 15000 out of 250000 steps  (6 percent)
[12:35:23] Writing local files
[12:35:23] Completed 17500 out of 250000 steps  (7 percent)
[13:00:11] Writing local files
[13:00:12] Completed 20000 out of 250000 steps  (8 percent)
[13:24:59] Writing local files
[13:24:59] Completed 22500 out of 250000 steps  (9 percent)
[13:49:47] Writing local files
[13:49:47] Completed 25000 out of 250000 steps  (10 percent)
[14:14:34] Writing local files
[14:14:35] Completed 27500 out of 250000 steps  (11 percent)
[14:34:02] - Autosending finished units... [October 6 14:34:02 UTC]
[14:34:02] Trying to send all finished work units
[14:34:02] + No unsent completed units remaining.
[14:34:02] - Autosend completed
[14:39:22] Writing local files
[14:39:22] Completed 30000 out of 250000 steps  (12 percent)
[15:04:10] Writing local files
[15:04:10] Completed 32500 out of 250000 steps  (13 percent)
[15:28:48] Writing local files
[15:28:48] Completed 35000 out of 250000 steps  (14 percent)
[15:53:33] Writing local files
[15:53:33] Completed 37500 out of 250000 steps  (15 percent)
[16:18:19] Writing local files
[16:18:19] Completed 40000 out of 250000 steps  (16 percent)
[16:43:05] Writing local files
[16:43:06] Completed 42500 out of 250000 steps  (17 percent)
[17:07:52] Writing local files
[17:07:52] Completed 45000 out of 250000 steps  (18 percent)
[17:28:20] Killing all core threads
[17:28:20] Killing 4 cores
[17:28:20] Killing core 0
[17:28:20] Killing core 1
[17:28:20] Killing core 2
[17:28:20] Killing core 3

Folding@Home Client Shutdown at user request.
[17:28:20] ***** Got a SIGTERM signal (2)
[17:28:20] Killing all core threads
[17:28:20] Killing 4 cores
[17:28:20] Killing core 0
[17:28:20] Killing core 1
[17:28:20] Killing core 2
[17:28:20] Killing core 3

Folding@Home Client Shutdown.


C:\Users\GatoPrimo\Fah2ndSmpClient>qfix
entry 3, status 0, address 171.64.65.64:8080
entry 4, status 0, address 171.64.65.64:8080
entry 5, status 0, address 171.64.65.64:8080
  Found results <work\wuresults_05.dat>: proj 2665, run 0, clone 545, gen 48
   -- queue entry: proj 2665, run 0, clone 545, gen 48
   -- requeued for upload
entry 6, status 0, address 171.64.65.64:8080
  Found results <work\wuresults_06.dat>: proj 2665, run 0, clone 545, gen 48
   -- queue entry: proj 2665, run 0, clone 545, gen 48
   -- requeued for upload
entry 7, status 0, address 171.64.65.64:8080
  Found results <work\wuresults_07.dat>: proj 2665, run 0, clone 545, gen 48
   -- queue entry: proj 2665, run 0, clone 545, gen 48
   -- requeued for upload
entry 8, status 0, address 171.64.65.64:8080
  Found results <work\wuresults_08.dat>: proj 2665, run 0, clone 545, gen 48
   -- queue entry: proj 2665, run 0, clone 545, gen 48
   -- requeued for upload
entry 9, status 0, address 171.64.65.64:8080
  Found results <work\wuresults_09.dat>: proj 2665, run 0, clone 545, gen 48
   -- queue entry: proj 2665, run 0, clone 545, gen 48
   -- requeued for upload
entry 0, status 0, address 171.64.65.64:8080
  Found results <work\wuresults_00.dat>: proj 2665, run 0, clone 545, gen 48
   -- queue entry: proj 2665, run 0, clone 545, gen 48
   -- requeued for upload
entry 1, status 0, address 171.64.65.64:8080
  Found results <work\wuresults_01.dat>: proj 2665, run 0, clone 545, gen 48
   -- queue entry: proj 2665, run 0, clone 545, gen 48
   -- requeued for upload
entry 2, status 1, address 171.64.65.64:8080
File needed repair.  Errors fixed: 7.



Note: Please read the license agreement (Folding@home-Win32-x86.exe -license). F
urther
use of this software requires that you have read and accepted this agreement.

4 cores detected
If you see this twice, MPI is working
If you see this twice, MPI is working


--- Opening Log file [October 6 17:32:05 UTC]


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.22 SMP Beta2r3

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\GatoPrimo\Fah2ndSmpClient
Executable: C:\Users\GatoPrimo\Fah2ndSmpClient\Folding@home-Win32-x86.exe
Arguments: -smp -verbosity 9

[17:32:05] - Ask before connecting: No
[17:32:05] - User name: [EV]LithiumSmp (Team 104636)
[17:32:05] - User ID: C7BCBFB2C868C07
[17:32:05] - Machine ID: 3
[17:32:05]
[17:32:05] Loaded queue successfully.
[17:32:05]
[17:32:05] - Autosending finished units... [October 6 17:32:05 UTC]
[17:32:05] + Processing work unit
[17:32:05] Trying to send all finished work units
[17:32:05] Work type a1 not eligible for variable processors
[17:32:05] Project: 2665 (Run 0, Clone 545, Gen 48)
[17:32:05] Core required: FahCore_a1.exe


[17:32:05] Core found.
[17:32:05] + Attempting to send results [October 6 17:32:05 UTC]
[17:32:05] Using generic mpiexec calls
[17:32:05] - Reading file work/wuresults_00.dat from core
[17:32:05]   (Read 57492 bytes from disk)
[17:32:05] Working on queue slot 02 [October 6 17:32:05 UTC]
[17:32:05] Connecting to http://171.64.65.64:8080/
[17:32:05] + Working ...
[17:32:05] - Calling 'mpiexec -np 4 -channel auto -host 127.0.0.1 FahCore_a1.exe
 -dir work/ -suffix 02 -checkpoint 30 -verbose -lifeline 4812 -version 622'

[17:32:05] Posted data.
[17:32:05]
[17:32:05] *------------------------------*
[17:32:05] Folding@Home Gromacs SMP Core
[17:32:05] Version 1.74 (March 10, 2007)
[17:32:05]
[17:32:05] Preparing to commence simulation
[17:32:05] - Ensuring status. Please wait.
[17:32:05] Initial: 0000; Conversation time very short, giving reduced weight in
 bandwidth avg
[17:32:05] - Uploaded at ~114 kB/s
[17:32:05] - Averaged speed for that direction ~140 kB/s
[17:32:05] + Results successfully sent
[17:32:05] Thank you for your contribution to Folding@Home.
[17:32:05] + Number of Units Completed: 8

[17:32:05] Project: 2665 (Run 0, Clone 545, Gen 48)


[17:32:05] + Attempting to send results [October 6 17:32:05 UTC]
[17:32:05] - Reading file work/wuresults_01.dat from core
[17:32:05]   (Read 57492 bytes from disk)
[17:32:05] Connecting to http://171.64.65.64:8080/
[17:32:05] Posted data.
[17:32:06] Initial: 0000; - Uploaded at ~57 kB/s
[17:32:06] - Averaged speed for that direction ~123 kB/s
[17:32:06] + Results successfully sent
[17:32:06] Thank you for your contribution to Folding@Home.
[17:32:06] + Number of Units Completed: 9

[17:32:06] Project: 2665 (Run 0, Clone 545, Gen 48)


[17:32:06] + Attempting to send results [October 6 17:32:06 UTC]
[17:32:06] - Reading file work/wuresults_05.dat from core
[17:32:06]   (Read 57492 bytes from disk)
[17:32:06] Connecting to http://171.64.65.64:8080/
[17:32:06] Posted data.
[17:32:06] Initial: 0000; Conversation time very short, giving reduced weight in
 bandwidth avg
[17:32:06] - Uploaded at ~114 kB/s
[17:32:06] - Averaged speed for that direction ~122 kB/s
[17:32:06] + Results successfully sent
[17:32:06] Thank you for your contribution to Folding@Home.
[17:32:06] + Number of Units Completed: 10

[17:32:06] Project: 2665 (Run 0, Clone 545, Gen 48)


[17:32:06] + Attempting to send results [October 6 17:32:06 UTC]
[17:32:06] - Reading file work/wuresults_06.dat from core
[17:32:06]   (Read 56718 bytes from disk)
[17:32:06] Connecting to http://171.64.65.64:8080/
[17:32:06] Posted data.
[17:32:07] Initial: 0000; - Uploaded at ~56 kB/s
[17:32:07] - Averaged speed for that direction ~109 kB/s
[17:32:07] + Results successfully sent
[17:32:07] Thank you for your contribution to Folding@Home.
[17:32:07] + Number of Units Completed: 11

[17:32:07] Project: 2665 (Run 0, Clone 545, Gen 48)


[17:32:07] + Attempting to send results [October 6 17:32:07 UTC]
[17:32:07] - Reading file work/wuresults_07.dat from core
[17:32:07]   (Read 110629 bytes from disk)
[17:32:07] Connecting to http://171.64.65.64:8080/
[17:32:07] Posted data.
[17:32:07] Initial: 0000; Conversation time very short, giving reduced weight in
 bandwidth avg
[17:32:07] - Uploaded at ~218 kB/s
[17:32:07] - Averaged speed for that direction ~121 kB/s
[17:32:07] + Results successfully sent
[17:32:07] Thank you for your contribution to Folding@Home.
[17:32:07] + Number of Units Completed: 12

[17:32:07] Project: 2665 (Run 0, Clone 545, Gen 48)


[17:32:07] + Attempting to send results [October 6 17:32:07 UTC]
[17:32:07] - Reading file work/wuresults_08.dat from core
[17:32:07]   (Read 57492 bytes from disk)
[17:32:07] Connecting to http://171.64.65.64:8080/
[17:32:08] Posted data.
[17:32:08] Initial: 0000; - Uploaded at ~57 kB/s
[17:32:08] - Averaged speed for that direction ~108 kB/s
[17:32:08] + Results successfully sent
[17:32:08] Thank you for your contribution to Folding@Home.
[17:32:08] + Number of Units Completed: 13

[17:32:08] Project: 2665 (Run 0, Clone 545, Gen 48)


[17:32:08] + Attempting to send results [October 6 17:32:08 UTC]
[17:32:08] - Reading file work/wuresults_09.dat from core
[17:32:08]   (Read 57492 bytes from disk)
[17:32:08] Connecting to http://171.64.65.64:8080/
[17:32:08] Posted data.
[17:32:08] Initial: 0000; Conversation time very short, giving reduced weight in
 bandwidth avg
[17:32:08] - Uploaded at ~114 kB/s
[17:32:08] - Averaged speed for that direction ~109 kB/s
[17:32:08] + Results successfully sent
[17:32:08] Thank you for your contribution to Folding@Home.
[17:32:08] + Number of Units Completed: 14

[17:32:09] + Sent 7 of 7 completed units to the server
[17:32:09] - Autosend completed
[17:32:22] - Looking at optimizations...
[17:32:22] - Working with standard loops on this execution.
[17:32:22] - Previous termination of core was improper.
[17:32:22] - Going to use standard loops.
[17:32:22] - Files status OK
[17:32:39] - Expanded 4683964 -> 24426905 (decompressed 521.5 percent)
[17:32:39]
[17:32:39] Project: 2665 (Run 0, Clone 545, Gen 48)
[17:32:39]
[17:32:40] Entering M.D.
[17:32:49] Calling FAH init
[17:32:51] ater
[17:32:51] Writing local files
[17:32:51] rom checkpoint)
[17:32:51] Read checkpoint
[17:32:52] eps  (18 percent)
[17:32:52] ter
[17:32:52] Writing local files
[17:32:52] Completed 45000 out of 250000 steps  (18 percent)
[17:33:01] Extra SSE boost OK.

Re: Project: 2665 (Run 0, Clone 545, Gen 48)

Posted: Mon Oct 06, 2008 7:52 pm
by toTOW
Hi [EV]LithiumSmp (team 104636),
Your WU (P2665 R0 C545 G48) was added to the stats database on 2008-10-06 11:18:46 for 489.79 points of credit.

Re: Project: 2665 (Run 0, Clone 545, Gen 48)

Posted: Mon Oct 06, 2008 8:11 pm
by ElectricVehicle
Thanks for checking. I'll be interested to see if we get any reports from others to get an idea if this is a bad WU - my suspicion - or whether I should look for other causes. Especially since my computer finished another WU with no issues, while this one had issues. The only difference between the two SMP clients in the machine are the cores assigned using the new configurable Affinity Changer (Neat tool). I've seen problem WU's in both clients while in the other client a WU completes successfully.
All times are UTC
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited