Page 1 of 1
Project: 2613 (Run 7, Clone 6, Gen 27)
Posted: Thu Sep 04, 2008 12:18 am
by Baowoulf
I got this project a few days ago on an unoverclocked computer running 6.20 systemtray cpu client. It was running fine until it hit 60 or 61 out of 125 frames. Then I got a pop up on my screen from Folding@Home that said "Folding@home has run into a serious error running the core. and will shutdown." After I hit ok it closes the program.
I think it gave an error when I tried to view the original log file. But when I restarted the log file started from today and I can't access the previous log file. Because of where it's installed I have to turn on viewing of hidden folders and for some reason now of all times each time I set it to that it's like it doesn't go through and sets it back at the default. I wish this installed to the same place 5.03 did maybe then I wouldn't have the WU download program I have with this version as well.
Each time I try to restart it gives the same error. It doesn't go on to a new WU either. Just eventually gives the error and shuts down.
Code: Select all
--- Opening Log file [September 3 21:55:26 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Documents and Settings\Michael Arreola\Application Data\Folding@home-x86
[21:55:26] - Ask before connecting: No
[21:55:26] - User name: Baowoulf (Team 48759)
[21:55:26] - User ID: 5CA4BB560FCB57B7
[21:55:26] - Machine ID: 1
[21:55:26]
[21:55:27] Loaded queue successfully.
[21:55:27] Initialization complete
[21:55:27]
[21:55:27] + Processing work unit
[21:55:27] Core required: FahCore_78.exe
[21:55:27] Core found.
[21:55:27] Working on queue slot 03 [September 3 21:55:27 UTC]
[21:55:27] + Working ...
[21:55:28]
[21:55:28] *------------------------------*
[21:55:28] Folding@Home Gromacs Core
[21:55:28] Version 1.90 (March 8, 2006)
[21:55:28]
[21:55:28] Preparing to commence simulation
[21:55:28] - Ensuring status. Please wait.
[21:55:45] - Looking at optimizations...
[21:55:45] - Working with standard loops on this execution.
[21:55:46] No C.P. to delete.
[21:55:47] - Created dyn
[21:55:47] - Files status OK
[21:56:28] - Expanded 9259744 -> 47924691 (decompressed 53.7 percent)
[21:56:29] No C.P. to delete.
[21:56:29] - Starting from initial work packet
[21:56:29]
[21:56:29] Project: 2613 (Run 7, Clone 6, Gen 27)
[21:56:29]
[21:56:44] Entering M.D.
[21:57:01] Gromacs error.
[21:57:01]
[21:57:01] Folding@home Core Shutdown: UNKNOWN_ERROR
[21:57:14] CoreStatus = 79 (121)
[21:57:14] Client-core communications error: ERROR 0x79
[21:57:14] This is a sign of more serious problems, shutting down.
Re: Project: 2613 (Run 7, Clone 6, Gen 27)
Posted: Thu Sep 04, 2008 12:22 am
by kasson
That looks like a file corruption problem. If you don't have any completed but unsent work units, I'd recommend quitting the client, deleting queue.dat and the contents of the work directory, and then restarting the client.
Re: Project: 2613 (Run 7, Clone 6, Gen 27)
Posted: Thu Sep 04, 2008 12:31 am
by Baowoulf
The only problem is all that is in a hidden file because of where version 6.20 installs too
. For some reason it won't let me see them. I set it to view hidden files and hit apply and ok and nothing happens no hidden files show up
.
Re: Project: 2613 (Run 7, Clone 6, Gen 27)
Posted: Thu Sep 04, 2008 12:38 am
by ChelseaOilman
Look in the Start menu for the F@H program. I believe there's a link there that should open Windows Explorer showing the contents of the data folder even if the folder itself is hidden.
Re: Project: 2613 (Run 7, Clone 6, Gen 27)
Posted: Thu Sep 04, 2008 12:48 am
by Baowoulf
Thanks it worked to getting into the file. Found the missing part of the log file. I was able to delete the queue.dat file and all of the WU folding except for one thing. "wudata_03CP.arc" When I go to delete that I get a message that pops up and says
Cannot delete wudata_03CP: Access is denied.
Make sure the disk is not full or write-protected and that the file is not currently in use.
F@H is not running at the time.
Code: Select all
--- Opening Log file [September 3 03:38:09 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Documents and Settings\Michael Arreola\Application Data\Folding@home-x86
[03:38:09] - Ask before connecting: No
[03:38:09] - User name: Baowoulf (Team 48759)
[03:38:09] - User ID: 5CA4BB560FCB57B7
[03:38:09] - Machine ID: 1
[03:38:09]
[03:38:09] Loaded queue successfully.
[03:38:09] Initialization complete
[03:38:09]
[03:38:09] + Processing work unit
[03:38:09] Core required: FahCore_78.exe
[03:38:09] Core found.
[03:38:09] Working on queue slot 03 [September 3 03:38:09 UTC]
[03:38:09] + Working ...
[03:38:10]
[03:38:10] *------------------------------*
[03:38:10] Folding@Home Gromacs Core
[03:38:10] Version 1.90 (March 8, 2006)
[03:38:10]
[03:38:10] Preparing to commence simulation
[03:38:10] - Looking at optimizations...
[03:38:10] - Files status OK
[03:39:16] - Expanded 9259744 -> 47924691 (decompressed 53.7 percent)
[03:39:41]
[03:39:41] Project: 2613 (Run 7, Clone 6, Gen 27)
[03:39:41]
[03:39:49] Assembly optimizations on if available.
[03:39:49] Entering M.D.
[03:40:49] (Starting from checkpoint)
[03:40:50] Protein: p2613_TETHERED VESICLES
[03:40:50]
[03:40:51] Writing local files
[03:40:53] Completed 43284 out of 125000 steps (35%)
[03:41:29] Extra SSE boost OK.
[04:10:38] Writing local files
[04:10:42] Completed 43750 out of 125000 steps (35%)
[04:17:15] Opening C:\Documents and Settings\Michael Arreola\Application Data\Folding@home-x86\MyFolding.html...
[05:47:12] Writing local files
[05:47:17] Completed 45000 out of 125000 steps (36%)
[07:22:31] Writing local files
[07:22:32] Completed 46250 out of 125000 steps (37%)
[08:27:15] Writing local files
[08:27:16] Completed 47500 out of 125000 steps (38%)
[09:31:59] Writing local files
[09:32:00] Completed 48750 out of 125000 steps (39%)
[09:38:09] + Working...
[10:36:44] Writing local files
[10:36:45] Completed 50000 out of 125000 steps (40%)
[11:41:38] Writing local files
[11:41:40] Completed 51250 out of 125000 steps (41%)
[12:46:25] Writing local files
[12:46:26] Completed 52500 out of 125000 steps (42%)
[13:51:07] Writing local files
[13:51:08] Completed 53750 out of 125000 steps (43%)
[14:55:54] Writing local files
[14:55:55] Completed 55000 out of 125000 steps (44%)
[15:28:34] Opening C:\Documents and Settings\Michael Arreola\Application Data\Folding@home-x86\MyFolding.html...
[15:38:10] + Working...
[16:10:49] Writing local files
[16:10:50] Completed 56250 out of 125000 steps (45%)
[17:25:46] Writing local files
[17:25:54] Completed 57500 out of 125000 steps (46%)
[18:43:33] Writing local files
[18:43:47] Completed 58750 out of 125000 steps (47%)
[20:13:36] Writing local files
[20:13:56] Completed 60000 out of 125000 steps (48%)
[21:36:17] Writing local files
[21:36:23] Gromacs error.
[21:36:23]
[21:36:23] Folding@home Core Shutdown: UNKNOWN_ERROR
[21:36:30] CoreStatus = 79 (121)
[21:36:30] Client-core communications error: ERROR 0x79
[21:36:30] This is a sign of more serious problems, shutting down.
[21:38:10] + Working...
Re: Project: 2613 (Run 7, Clone 6, Gen 27)
Posted: Thu Sep 04, 2008 12:53 am
by ChelseaOilman
What happens if you reboot the computer and restart the client? I don't think that left over file will matter.
Re: Project: 2613 (Run 7, Clone 6, Gen 27)
Posted: Thu Sep 04, 2008 1:25 am
by Baowoulf
Thanks for the help it's working on a new P895 WU. As well as me being able to make hidden files viewable again. Guess I should have probably tried a restart in the beginning.