Page 1 of 2
GT710 no longer works
Posted: Thu Dec 30, 2021 6:14 am
by Meki01
Hi! I have had a system (Win10, Intel i7, GT710) running for a few months with no problems. Now I have the message "Disabeld" on the graphics card. Is the GT710 no longer supported?
Thanks for the quick reply!
05:56:11:WARNING:FS02:No CUDA or OpenCL 1.2+ support detected for GPU slot 02: gpu
-1. Disabling.
Re: GT710 no longer works
Posted: Thu Dec 30, 2021 9:43 am
by aetch
Can you post the first couple of hundred lines of your log.
Re: GT710 no longer works
Posted: Thu Dec 30, 2021 9:46 am
by PaulTV
When the FAH client starts before there is internet connection, it won't be able to get the GPUs.txt file, and disable the GPU. Pause folding, stop the fahclient process, and restart it. If that doesn't help, try removing GPUs.txt (from C:\ProgramData\FAHClient, if you're on Windows) after stopping faclient.
Re: GT710 no longer works
Posted: Thu Dec 30, 2021 10:11 am
by toTOW
They are still supported (Kepler chip).
Did you install drivers from nVidia website ?
Re: GT710 no longer works
Posted: Thu Dec 30, 2021 10:16 am
by JimboPalmer
https://www.techpowerup.com/gpu-specs/g ... -710.c2614
Your card uses a Fermi based micro-architexture, and is no longer supported. F@H requires both a 64 bit floating point math unit and support for OpenCL 1.2. Fermi does not support 1.2,, so is no longer supported. I would not invest in a replacement slower than a GT 1030, which is based on a much newer Pascal micro-architexture.
Re: GT710 no longer works
Posted: Thu Dec 30, 2021 11:15 am
by toTOW
This one is not listed in GPUs.txt ... there are only 3 models based on GK208 chip.
Re: GT710 no longer works
Posted: Thu Dec 30, 2021 11:39 am
by Meki01
aetch wrote:Can you post the first couple of hundred lines of your log.
Code: Select all
*********************** Log Started 2021-12-30T06:20:29Z ***********************
06:20:29:******************************* libFAH ********************************
06:20:29: Date: Oct 20 2020
06:20:29: Time: 13:36:55
06:20:29: Revision: 5ca109d295a6245e2a2f590b3d0085ad5e567aeb
06:20:29: Branch: master
06:20:29: Compiler: Visual C++ 2015
06:20:29: Options: /TP /nologo /EHa /wd4297 /wd4103 /O2 /Zc:throwingNew /MT
06:20:29: Platform: win32 10
06:20:29: Bits: 32
06:20:29: Mode: Release
06:20:29:****************************** FAHClient ******************************
06:20:29: Version: 7.6.21
06:20:29: Author: Joseph Coffland <joseph@cauldrondevelopment.com>
06:20:29: Copyright: 2020 foldingathome.org
06:20:29: Homepage: https://foldingathome.org/
06:20:29: Date: Oct 20 2020
06:20:29: Time: 13:41:04
06:20:29: Revision: 6efbf0e138e22d3963e6a291f78dcb9c6422a278
06:20:29: Branch: master
06:20:29: Compiler: Visual C++ 2015
06:20:29: Options: /TP /nologo /EHa /wd4297 /wd4103 /O2 /Zc:throwingNew /MT
06:20:29: Platform: win32 10
06:20:29: Bits: 32
06:20:29: Mode: Release
06:20:29: Config: C:\ProgramData\FAHClient\config.xml
06:20:29:******************************** CBang ********************************
06:20:29: Date: Oct 20 2020
06:20:29: Time: 11:36:18
06:20:29: Revision: 7e4ce85225d7eaeb775e87c31740181ca603de60
06:20:29: Branch: master
06:20:29: Compiler: Visual C++ 2015
06:20:29: Options: /TP /nologo /EHa /wd4297 /wd4103 /O2 /Zc:throwingNew /MT
06:20:29: Platform: win32 10
06:20:29: Bits: 32
06:20:29: Mode: Release
06:20:29:******************************* System ********************************
06:20:29: CPU: Intel(R) Core(TM) i7-4790S CPU @ 3.20GHz
06:20:29: CPU ID: GenuineIntel Family 6 Model 60 Stepping 3
06:20:29: CPUs: 8
06:20:29: Memory: 3.96GiB
06:20:29: Free Memory: 1.72GiB
06:20:29: Threads: WINDOWS_THREADS
06:20:29: OS Version: 6.2
06:20:29: Has Battery: false
06:20:29: On Battery: false
06:20:29: UTC Offset: 1
06:20:29: PID: 5268
06:20:29: CWD: C:\ProgramData\FAHClient
06:20:29: Win32 Service: false
06:20:29: OS: Windows 10 Enterprise
06:20:29: OS Arch: AMD64
06:20:29: GPUs: 1
06:20:29: GPU 0: Bus:1 Slot:0 Func:0 NVIDIA:1
06:20:29: CUDA Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:3.5 Driver:11.4
06:20:29:OpenCL Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:3.0 Driver:472.12
06:20:29:***********************************************************************
06:20:29:<config>
06:20:29: <!-- Network -->
06:20:29: <proxy v=':8080'/>
06:20:29:
06:20:29: <!-- User Information -->
Re: GT710 no longer works
Posted: Thu Dec 30, 2021 11:44 am
by Meki01
toTOW wrote:They are still supported (Kepler chip).
Did you install drivers from nVidia website ?
Yes, I have. It has worked for a few months now it suddenly stopped. I have already reinstalled the drivers and de-installed and reinstalled the FAH client ...
Re: GT710 no longer works
Posted: Thu Dec 30, 2021 11:56 am
by Meki01
PaulTV wrote:When the FAH client starts before there is internet connection, it won't be able to get the GPUs.txt file, and disable the GPU. Pause folding, stop the fahclient process, and restart it. If that doesn't help, try removing GPUs.txt (from C:\ProgramData\FAHClient, if you're on Windows) after stopping faclient.
The internet is stable ... I deleted the GPUs.txt, unfortunately that didn't work. The GPU is still disabled ...
Re: GT710 no longer works
Posted: Thu Dec 30, 2021 12:00 pm
by Meki01
JimboPalmer wrote:https://www.techpowerup.com/gpu-specs/g ... -710.c2614
Your card uses a Fermi based micro-architexture, and is no longer supported. F@H requires both a 64 bit floating point math unit and support for OpenCL 1.2. Fermi does not support 1.2,, so is no longer supported. I would not invest in a replacement slower than a GT 1030, which is based on a much newer Pascal micro-architexture.
Thank you, then it will be obsolete ...
Re: GT710 no longer works
Posted: Thu Dec 30, 2021 4:15 pm
by Joe_H
Meki01 wrote:JimboPalmer wrote:https://www.techpowerup.com/gpu-specs/g ... -710.c2614
Your card uses a Fermi based micro-architexture, and is no longer supported. F@H requires both a 64 bit floating point math unit and support for OpenCL 1.2. Fermi does not support 1.2,, so is no longer supported. I would not invest in a replacement slower than a GT 1030, which is based on a much newer Pascal micro-architexture.
Thank you, then it will be obsolete ...
That Fermi based GT 710 card is not listed in GPUs.txt, I don't think it ever was. There are 3 Kepler based GT 710 models, the only way we can tell which you have is by you providing the PCI ID number of the card. The Fermi based 710 is not even shown on the wikipedia page for nVidia cards. There is a GF119 based GT 705 listed. If you have a Kepler based GT 710 it should still work, but you may need to go to an older driver.
nVidia ended support for Kepler based GPUs in October, they ended support for the older Fermi cards a couple years ago. Legacy support may or may not include working OpenCL support on drivers released since then. Only security fixes will be provided for a couple more years.
Re: GT710 no longer works
Posted: Thu Dec 30, 2021 6:39 pm
by toTOW
Meki01> what's the device ID of your GPU ? (You can get it with GPUZ for instance)
Re: GT710 no longer works
Posted: Fri Jan 21, 2022 10:32 am
by Meki01
Hi! The problem was apparently due to a firewall - changeover on the part of our IT. I now get work orders again and the graphics card as well. Unfortunately, the work orders can no longer be sent back. IT has already tried some settings, but I still get the error message:
Code: Select all
10:25:57:WU00:FS00:Trying to send results to collection server
10:25:57:WU00:FS00:Uploading 20.09MiB to 129.32.209.205
10:25:57:WU00:FS00:Connecting to 129.32.209.205:8080
10:26:27:ERROR:WU00:FS00:Exception: 10002: Received short response, expected 512 bytes, got 0
Which ports would have to be open in the firewall? It's a Fortinet.... Thanks for your help!
Re: GT710 no longer works
Posted: Fri Jan 21, 2022 11:43 am
by toTOW
FAHClient acts as a standard browser and uses ports 8080 and 80 ...
If your firewall has DPI features (traffic inspection), that's what you have to disable ...
Re: GT710 no longer works
Posted: Sat Jan 22, 2022 3:01 am
by MeeLee
I don't think it's delisted because of not being compatible, but because of not being able to finish the WUs on time.
It's tough to do with a GT 730, but a 710 is way slower.
-1. Disabling.