Thanks for the responses.
To reply:
No, I am not using Vista. Am using XP SP2.
No, I was not overclocking when the frames got lost. There were a few occasions (2 that I know of) when I was running the FAH client and the system rebooted due to an unstable overclocking. But those were not among the times I wrote about in my post, when I lost the frames I had done. At any rate, now I run the client only at confirmed settings, until I test and thoroughly confirm more aggressive OC's by the usual means (which won't be for a while).
In reference to shutting down the client, the responses indicate that it should be manually shut down each time the computer is shut down or rebooted. I now do that, in an abundance of caution after the frame loses. But on some occasions in the past, I didn't, relying on it to terminate safely like the other programs that run in the Windows tray (antivirus, antispyware etc.). I presume when the program is manually shut down it routinely saves its work. Also, in the configuration menu, advanced tab, the checkpoint slider is set to 6 minutes, which I think is more frequent than the default. I would have assumed this would save all work more than 6 minutes old, even if the pc crashed.
I append the part of FAHlog-Prev.txt (the full text is in excess of the posting limits), which goes back to the relevant time period for the frame loses. It shows several places where the work unit was deleted because of an issue with the digital signature, as well as some reports of pc system instability (although I am certain there have only been 2 incidents of OC resets, and the all temps in the system are far under any thermal thresholds).
Code: Select all
------------------------ Opening Log file [December 17 15:47:22]
# Windows Graphical Edition ###################################################
###############################################################################
Folding@Home Client Version 5.03
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@Home
[15:47:22] - Ask before connecting: No
[15:47:22] - User name: Oakwheel (Team 31574)
[15:47:22] - User ID: 699E8B4557618F18
[15:47:22] - Machine ID: 1
[15:47:22]
[15:47:22] Loaded queue successfully.
[15:47:22] Initialization complete
[15:47:22] + Benchmarking ...
[15:47:24] - Preparing to get new work unit...
[15:47:24] + Attempting to get work packet
[15:47:24] - Connecting to assignment server
[15:47:26] - Successful: assigned to (171.65.103.162).
[15:47:26] + News From Folding@Home: Welcome to Folding@Home
[15:47:26] Loaded queue successfully.
[15:47:26] - Couldn't send HTTP request to server
[15:47:26] (Got status 503)
[15:47:26] + Could not connect to Work Server
[15:47:26] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[15:47:31] + Attempting to get work packet
[15:47:31] - Connecting to assignment server
[15:47:32] - Successful: assigned to (171.65.103.162).
[15:47:32] + News From Folding@Home: Welcome to Folding@Home
[15:47:32] Loaded queue successfully.
[15:47:32] - Couldn't send HTTP request to server
[15:47:32] (Got status 503)
[15:47:32] + Could not connect to Work Server
[15:47:32] - Error: Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[15:47:44] + Attempting to get work packet
[15:47:44] - Connecting to assignment server
[15:47:45] - Successful: assigned to (171.65.103.162).
[15:47:45] + News From Folding@Home: Welcome to Folding@Home
[15:47:45] Loaded queue successfully.
[15:47:45] - Couldn't send HTTP request to server
[15:47:45] (Got status 503)
[15:47:45] + Could not connect to Work Server
[15:47:45] - Error: Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[15:48:20] + Attempting to get work packet
[15:48:20] - Connecting to assignment server
[15:48:21] - Successful: assigned to (171.65.103.162).
[15:48:21] + News From Folding@Home: Welcome to Folding@Home
[15:48:21] Loaded queue successfully.
[15:48:32] + Closed connections
[15:48:32]
[15:48:32] + Processing work unit
[15:48:32] Core required: FahCore_78.exe
[15:48:32] Core found.
[15:48:32] Working on Unit 01 [December 17 15:48:32]
[15:48:32] + Working ...
[15:48:32]
[15:48:32] *------------------------------*
[15:48:32] Folding@Home Gromacs Core
[15:48:32] Version 1.90 (March 8, 2006)
[15:48:32]
[15:48:32] Preparing to commence simulation
[15:48:32] - Looking at optimizations...
[15:48:32] - Created dyn
[15:48:32] - Files status OK
[15:48:34] - Expanded 3065020 -> 16578189 (decompressed 540.8 percent)
[15:48:35] - Starting from initial work packet
[15:48:35]
[15:48:35] Project: 2417 (Run 24, Clone 25, Gen 11)
[15:48:35]
[15:48:35] Assembly optimizations on if available.
[15:48:35] Entering M.D.
[15:48:42] Protein: p2417_Ribo_Cl
[15:48:42]
[15:48:42] Writing local files
[15:48:44] Extra SSE boost OK.
[15:48:44] Writing local files
[15:48:44] Completed 0 out of 250000 steps (0)
[15:50:53] Quit 101 - Fatal error: NaN detected: (ener[13])
[15:50:53]
[15:50:53] Simulation instability has been encountered. The run has entered a
[15:50:53] state from which no further progress can be made.
[15:50:53] This may be the correct result of the simulation, however if you
[15:50:53] often see other project units terminating early like this
[15:50:53] too, you may wish to check the stability of your computer (issues
[15:50:53] such as high temperature, overclocking, etc.).
[15:50:53] Going to send back what have done.
[15:50:53] logfile size: 7600
[15:50:53] - Writing 8163 bytes of core data to disk...
[15:50:53] ... Done.
[15:50:54]
[15:50:54] Folding@home Core Shutdown: EARLY_UNIT_END
[15:50:57] CoreStatus = 72 (114)
[15:50:57] Sending work to server
[15:50:57] + Attempting to send results
[15:50:57] - Couldn't send HTTP request to server
[15:50:57] (Got status 503)
[15:50:57] + Could not connect to Work Server (results)
[15:50:57] (171.65.103.162:8080)
[15:50:57] - Error: Could not transmit unit 01 (completed December 17) to work server.
[15:50:57] Keeping unit 01 in queue.
[15:50:57] + Attempting to send results
[15:50:57] - Couldn't send HTTP request to server
[15:50:57] (Got status 503)
[15:50:57] + Could not connect to Work Server (results)
[15:50:57] (171.65.103.162:8080)
[15:50:57] - Error: Could not transmit unit 01 (completed December 17) to work server.
[15:50:57] + Attempting to send results
[15:50:58] - Couldn't send HTTP request to server
[15:50:58] + Could not connect to Work Server (results)
[15:50:58] (171.65.103.100:8080)
[15:50:58] Could not transmit unit 01 to Collection server; keeping in queue.
[15:50:58] - Preparing to get new work unit...
[15:50:58] + Attempting to get work packet
[15:50:58] - Connecting to assignment server
[15:50:59] - Successful: assigned to (171.65.103.162).
[15:50:59] + News From Folding@Home: Welcome to Folding@Home
[15:50:59] Loaded queue successfully.
[15:50:59] - Couldn't send HTTP request to server
[15:50:59] + Could not connect to Work Server
[15:50:59] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[15:51:15] + Attempting to get work packet
[15:51:15] - Connecting to assignment server
[15:51:15] - Successful: assigned to (171.65.103.162).
[15:51:15] + News From Folding@Home: Welcome to Folding@Home
[15:51:16] Loaded queue successfully.
[15:51:16] - Couldn't send HTTP request to server
[15:51:16] (Got status 503)
[15:51:16] + Could not connect to Work Server
[15:51:16] - Error: Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[15:51:28] + Attempting to get work packet
[15:51:28] - Connecting to assignment server
[15:51:29] - Successful: assigned to (171.65.103.162).
[15:51:29] + News From Folding@Home: Welcome to Folding@Home
[15:51:29] Loaded queue successfully.
[15:51:29] - Couldn't send HTTP request to server
[15:51:29] (Got status 503)
[15:51:29] + Could not connect to Work Server
[15:51:29] - Error: Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[15:51:35] Opening C:\Program Files\Folding@Home\MyFolding.html...
[15:51:54] + Attempting to get work packet
[15:51:54] - Connecting to assignment server
[15:51:54] - Successful: assigned to (171.65.103.162).
[15:51:54] + News From Folding@Home: Welcome to Folding@Home
[15:51:54] Loaded queue successfully.
[15:51:54] - Couldn't send HTTP request to server
[15:51:54] (Got status 503)
[15:51:54] + Could not connect to Work Server
[15:51:54] - Error: Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[15:52:42] + Attempting to get work packet
[15:52:42] - Connecting to assignment server
[15:52:42] - Successful: assigned to (171.65.103.162).
[15:52:42] + News From Folding@Home: Welcome to Folding@Home
[15:52:43] Loaded queue successfully.
[15:52:43] - Couldn't send HTTP request to server
[15:52:43] (Got status 503)
[15:52:43] + Could not connect to Work Server
[15:52:43] - Error: Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
[15:54:04] + Attempting to get work packet
[15:54:04] - Connecting to assignment server
[15:54:04] - Successful: assigned to (171.65.103.162).
[15:54:04] + News From Folding@Home: Welcome to Folding@Home
[15:54:04] Loaded queue successfully.
[15:54:05] - Couldn't send HTTP request to server
[15:54:05] (Got status 503)
[15:54:05] + Could not connect to Work Server
[15:54:05] - Error: Attempt #6 to get work failed, and no other work to do.
Waiting before retry.
[15:56:52] + Attempting to get work packet
[15:56:52] - Connecting to assignment server
[15:56:53] - Successful: assigned to (171.65.103.162).
[15:56:53] + News From Folding@Home: Welcome to Folding@Home
[15:56:53] Loaded queue successfully.
[15:56:53] - Couldn't send HTTP request to server
[15:56:53] (Got status 503)
[15:56:53] + Could not connect to Work Server
[15:56:53] - Error: Attempt #7 to get work failed, and no other work to do.
Waiting before retry.
Folding@Home Client Shutdown.
--- Opening Log file [December 17 16:26:38]
# Windows Graphical Edition ###################################################
###############################################################################
Folding@Home Client Version 5.03
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@Home
[16:26:38] - Ask before connecting: No
[16:26:38] - User name: Oakwheel (Team 31574)
[16:26:38] - User ID: 699E8B4557618F18
[16:26:38] - Machine ID: 1
[16:26:38]
[16:26:38] Loaded queue successfully.
[16:26:38] Initialization complete
[16:26:38] + Benchmarking ...
[16:26:40] - Preparing to get new work unit...
[16:26:40] + Attempting to get work packet
[16:26:40] + Attempting to send results
[16:26:40] - Connecting to assignment server
[16:26:41] - Couldn't send HTTP request to server
[16:26:41] (Got status 503)
[16:26:41] + Could not connect to Work Server (results)
[16:26:41] (171.65.103.162:8080)
[16:26:41] - Error: Could not transmit unit 01 (completed December 17) to work server.
[16:26:41] + Attempting to send results
[16:26:41] - Successful: assigned to (171.65.103.162).
[16:26:41] + News From Folding@Home: Welcome to Folding@Home
[16:26:41] Loaded queue successfully.
[16:26:41] - Couldn't send HTTP request to server
[16:26:41] (Got status 503)
[16:26:41] + Could not connect to Work Server
[16:26:41] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[16:26:47] + Attempting to get work packet
[16:26:47] - Connecting to assignment server
[16:26:47] - Couldn't send HTTP request to server
[16:26:47] + Could not connect to Work Server (results)
[16:26:47] (171.65.103.100:8080)
[16:26:47] Could not transmit unit 01 to Collection server; keeping in queue.
[16:26:48] - Successful: assigned to (171.65.103.162).
[16:26:48] + News From Folding@Home: Welcome to Folding@Home
[16:26:48] Loaded queue successfully.
[16:27:04] + Closed connections
[16:27:04]
[16:27:04] + Processing work unit
[16:27:04] Core required: FahCore_78.exe
[16:27:04] Core found.
[16:27:04] Working on Unit 02 [December 17 16:27:04]
[16:27:04] + Working ...
[16:27:04]
[16:27:04] *------------------------------*
[16:27:04] Folding@Home Gromacs Core
[16:27:04] Version 1.90 (March 8, 2006)
[16:27:04]
[16:27:04] Preparing to commence simulation
[16:27:04] - Looking at optimizations...
[16:27:04] - Created dyn
[16:27:04] - Files status OK
[16:27:06] - Expanded 3061850 -> 16578193 (decompressed 541.4 percent)
[16:27:07] - Error: Bad work unit. Digital signatures don't match
[16:27:07] Error: Could not open work file
[16:27:07]
[16:27:07] Folding@home Core Shutdown: FILE_IO_ERROR
[16:27:10] CoreStatus = 75 (117)
[16:27:10] Error opening or reading from a file.
[16:27:10] Deleting current work unit & continuing...
[16:27:14] + Attempting to send results
[16:27:15] - Couldn't send HTTP request to server
[16:27:15] (Got status 503)
[16:27:15] + Could not connect to Work Server (results)
[16:27:15] (171.65.103.162:8080)
[16:27:15] - Error: Could not transmit unit 01 (completed December 17) to work server.
[16:27:15] + Attempting to send results
[16:27:28] - Couldn't send HTTP request to server
[16:27:28] + Could not connect to Work Server (results)
[16:27:28] (171.65.103.100:8080)
[16:27:28] Could not transmit unit 01 to Collection server; keeping in queue.
[16:27:28] - Preparing to get new work unit...
[16:27:28] + Attempting to get work packet
[16:27:28] - Connecting to assignment server
[16:27:28] - Successful: assigned to (171.65.103.162).
[16:27:28] + News From Folding@Home: Welcome to Folding@Home
[16:27:28] Loaded queue successfully.
[16:27:40] + Closed connections
[16:27:45]
[16:27:45] + Processing work unit
[16:27:45] Core required: FahCore_78.exe
[16:27:45] Core found.
[16:27:45] Working on Unit 03 [December 17 16:27:45]
[16:27:45] + Working ...
[16:27:46]
[16:27:46] *------------------------------*
[16:27:46] Folding@Home Gromacs Core
[16:27:46] Version 1.90 (March 8, 2006)
[16:27:46]
[16:27:46] Preparing to commence simulation
[16:27:46] - Looking at optimizations...
[16:27:46] - Created dyn
[16:27:46] - Files status OK
[16:27:48] - Expanded 3060270 -> 16578173 (decompressed 541.7 percent)
[16:27:48] - Starting from initial work packet
[16:27:48]
[16:27:48] Project: 2417 (Run 43, Clone 2, Gen 12)
[16:27:48]
[16:27:48] Assembly optimizations on if available.
[16:27:48] Entering M.D.
[16:27:55] Protein: p2417_Ribo_Cl
[16:27:55]
[16:27:55] Writing local files
[16:27:57] Extra SSE boost OK.
[16:27:58] Writing local files
[16:27:58] Completed 0 out of 250000 steps (0)
--- Opening Log file [December 17 19:10:30]
# Windows Graphical Edition ###################################################
###############################################################################
Folding@Home Client Version 5.03
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@Home
[19:10:30] - Ask before connecting: No
[19:10:30] - User name: Oakwheel (Team 31574)
[19:10:30] - User ID: 699E8B4557618F18
[19:10:30] - Machine ID: 1
[19:10:30]
[19:10:30] Loaded queue successfully.
[19:10:30] Initialization complete
[19:10:30] + Benchmarking ...
[19:10:32]
[19:10:32] + Processing work unit
[19:10:32] + Attempting to send results
[19:10:32] Core required: FahCore_78.exe
[19:10:32] Core found.
[19:10:33] Working on Unit 03 [December 17 19:10:33]
[19:10:33] + Working ...
[19:10:33] - Couldn't send HTTP request to server
[19:10:33] (Got status 503)
[19:10:33] + Could not connect to Work Server (results)
[19:10:33] (171.65.103.162:8080)
[19:10:33] - Error: Could not transmit unit 01 (completed December 17) to work server.
[19:10:33] + Attempting to send results
[19:10:33]
[19:10:33] *------------------------------*
[19:10:33] Folding@Home Gromacs Core
[19:10:33] Version 1.90 (March 8, 2006)
[19:10:33]
[19:10:33] Preparing to commence simulation
[19:10:33] - Ensuring status. Please wait.
[19:10:36] - Couldn't send HTTP request to server
[19:10:36] + Could not connect to Work Server (results)
[19:10:36] (171.65.103.100:8080)
[19:10:36] Could not transmit unit 01 to Collection server; keeping in queue.
[19:10:51] - Looking at optimizations...
[19:10:51] - Working with standard loops on this execution.
[19:10:51] - Previous termination of core was improper.
[19:10:51] - Files status OK
[19:10:53] - Expanded 3060270 -> 16578173 (decompressed 541.7 percent)
[19:10:53]
[19:10:53] Project: 2417 (Run 43, Clone 2, Gen 12)
[19:10:53]
[19:10:53] Entering M.D.
[19:11:15] (Starting from checkpoint)
[19:11:15] Protein: p2417_Ribo_Cl
[19:11:15]
[19:11:15] Writing local files
[19:11:18] Writing local files
[19:11:18] Completed 0 out of 250000 steps (0)
[19:32:44] Printing Queue Information
CURRENT QUEUE:
00 EMPTY
01 DONE "Folding@Home" (78) 171.65.103.162:8080 December 17 15:48->December 17 15:50:57
02 EMPTY
03 *READY "Folding@Home" (78) 171.65.103.162:8080 December 17 16:27 | March 8 16:27
04 EMPTY
05 EMPTY
06 EMPTY
07 EMPTY
08 EMPTY
09 EMPTY
[19:56:02] Writing local files
[19:56:02] Completed 2500 out of 250000 steps (1)
[20:41:39] Writing local files
[20:41:39] Completed 5000 out of 250000 steps (2)
[21:27:39] Writing local files
[21:27:40] Completed 7500 out of 250000 steps (3)
[22:13:48] Writing local files
[22:13:49] Completed 10000 out of 250000 steps (4)
Folding@Home Client Shutdown.
--- Opening Log file [December 17 22:27:12]
# Windows Graphical Edition ###################################################
###############################################################################
Folding@Home Client Version 5.03
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Program Files\Folding@Home
[22:27:12] - Ask before connecting: No
[22:27:12] - User name: Oakwheel (Team 31574)
[22:27:12] - User ID: 699E8B4557618F18
[22:27:12] - Machine ID: 1
[22:27:12]
[22:27:12] Loaded queue successfully.
[22:27:12] Initialization complete
[22:27:12] + Benchmarking ...
[22:27:14]
[22:27:14] + Processing work unit
[22:27:14] + Attempting to send results
[22:27:14] Core required: FahCore_78.exe
[22:27:14] Core found.
[22:27:14] Working on Unit 03 [December 17 22:27:14]
[22:27:14] + Working ...
[22:27:14] - Couldn't send HTTP request to server
[22:27:14] (Got status 503)
[22:27:14] + Could not connect to Work Server (results)
[22:27:14] (171.65.103.162:8080)
[22:27:14] - Error: Could not transmit unit 01 (completed December 17) to work server.
[22:27:14] + Attempting to send results
[22:27:15]
[22:27:15] *------------------------------*
[22:27:15] Folding@Home Gromacs Core
[22:27:15] Version 1.90 (March 8, 2006)
[22:27:15]
[22:27:15] Preparing to commence simulation
[22:27:15] - Looking at optimizations...
[22:27:15] - Files status OK
[22:27:16] - Couldn't send HTTP request to server
[22:27:16] + Could not connect to Work Server (results)
[22:27:16] (171.65.103.100:8080)
[22:27:16] Could not transmit unit 01 to Collection server; keeping in queue.
[22:27:18] - Expanded 3060270 -> 16578173 (decompressed 541.7 percent)
[22:27:18]
[22:27:18] Project: 2417 (Run 43, Clone 2, Gen 12)
[22:27:18]
[22:27:18] Assembly optimizations on if available.
[22:27:18] Entering M.D.
[22:27:40] (Starting from checkpoint)
[22:27:40] Protein: p2417_Ribo_Cl
[22:27:40]
[22:27:40] Writing local files
[22:27:40] Completed 10327 out of 250000 steps (4)
[22:27:42] Extra SSE boost OK.
[22:40:54] Writing local files
[22:40:54] Completed 12500 out of 250000 steps (5)
[22:47:12] Quit 101 - Fatal error: NaN detected: (ener[38])
[22:47:12]
[22:47:12] Simulation instability has been encountered. The run has entered a
[22:47:12] state from which no further progress can be made.
[22:47:12] This may be the correct result of the simulation, however if you
[22:47:12] often see other project units terminating early like this
[22:47:12] too, you may wish to check the stability of your computer (issues
[22:47:12] such as high temperature, overclocking, etc.).
[22:47:12] Going to send back what have done.
[22:47:12] logfile size: 30202
[22:47:12] - Writing 30765 bytes of core data to disk...
[22:47:12] ... Done.
[22:47:12]
[22:47:12] Folding@home Core Shutdown: EARLY_UNIT_END
[22:47:16] CoreStatus = 72 (114)
[22:47:16] Sending work to server
[22:47:16] + Attempting to send results
[22:47:17] + Results successfully sent
[22:47:17] Thank you for your contribution to Folding@Home.
[22:47:21] + Attempting to send results
[22:47:22] + Results successfully sent
[22:47:22] Thank you for your contribution to Folding@Home.
[22:47:22] - Preparing to get new work unit...
[22:47:22] + Attempting to get work packet
[22:47:22] - Connecting to assignment server
[22:47:22] - Successful: assigned to (171.65.103.162).
[22:47:22] + News From Folding@Home: Welcome to Folding@Home
[22:47:22] Loaded queue successfully.
[22:47:35] + Closed connections
[22:47:40]
[22:47:40] + Processing work unit
[22:47:40] Core required: FahCore_78.exe
[22:47:40] Core found.
[22:47:40] Working on Unit 04 [December 17 22:47:40]
[22:47:40] + Working ...
[22:47:40]
[22:47:40] *------------------------------*
[22:47:40] Folding@Home Gromacs Core
[22:47:40] Version 1.90 (March 8, 2006)
[22:47:40]
[22:47:40] Preparing to commence simulation
[22:47:40] - Looking at optimizations...
[22:47:40] - Created dyn
[22:47:40] - Files status OK
[22:47:42] - Expanded 3067012 -> 16578197 (decompressed 540.5 percent)
[22:47:42] - Error: Bad work unit. Digital signatures don't match
[22:47:42] Error: Could not open work file
[22:47:42]
[22:47:42] Folding@home Core Shutdown: FILE_IO_ERROR
[22:47:46] CoreStatus = 75 (117)
[22:47:46] Error opening or reading from a file.
[22:47:46] Deleting current work unit & continuing...
[22:47:50] - Preparing to get new work unit...
[22:47:50] + Attempting to get work packet
[22:47:50] - Connecting to assignment server
[22:47:51] - Successful: assigned to (171.65.103.162).
[22:47:51] + News From Folding@Home: Welcome to Folding@Home
[22:47:51] Loaded queue successfully.
[22:47:51] - Couldn't send HTTP request to server
[22:47:51] (Got status 503)
[22:47:51] + Could not connect to Work Server
[22:47:51] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[22:48:08] + Attempting to get work packet
[22:48:08] - Connecting to assignment server
[22:48:08] - Successful: assigned to (171.65.103.162).
[22:48:08] + News From Folding@Home: Welcome to Folding@Home
[22:48:08] Loaded queue successfully.
[22:48:21] + Closed connections
[22:48:26]
[22:48:26] + Processing work unit
[22:48:26] Core required: FahCore_78.exe
[22:48:26] Core found.
[22:48:26] Working on Unit 05 [December 17 22:48:26]
[22:48:26] + Working ...
[22:48:26]
[22:48:26] *------------------------------*
[22:48:26] Folding@Home Gromacs Core
[22:48:26] Version 1.90 (March 8, 2006)
[22:48:26]
[22:48:26] Preparing to commence simulation
[22:48:26] - Looking at optimizations...
[22:48:26] - Created dyn
[22:48:26] - Files status OK
[22:48:28] - Expanded 3065995 -> 16578197 (decompressed 540.7 percent)
[22:48:29] - Starting from initial work packet
[22:48:29]
[22:48:29] Project: 2418 (Run 12, Clone 87, Gen 8)
[22:48:29]
[22:48:29] Assembly optimizations on if available.
[22:48:29] Entering M.D.
[22:48:36] Protein: p2418_Ribo_Mg
[22:48:36]
[22:48:36] Writing local files
[22:48:38] Extra SSE boost OK.
[22:48:38] Writing local files
[22:48:38] Completed 0 out of 250000 steps (0)
[22:48:44] Quit 101 - Fatal error: NaN detected: (ener[13])
[22:48:44]
[22:48:44] Simulation instability has been encountered. The run has entered a
[22:48:44] state from which no further progress can be made.
[22:48:44] This may be the correct result of the simulation, however if you
[22:48:44] often see other project units terminating early like this
[22:48:44] too, you may wish to check the stability of your computer (issues
[22:48:44] such as high temperature, overclocking, etc.).
[22:48:44] Going to send back what have done.
[22:48:44] logfile size: 7599
[22:48:44] - Writing 8162 bytes of core data to disk...
[22:48:44] ... Done.
[22:48:44]
[22:48:44] Folding@home Core Shutdown: EARLY_UNIT_END
[22:48:48] CoreStatus = 72 (114)
[22:48:48] Sending work to server
[22:48:48] + Attempting to send results
[22:48:49] - Couldn't send HTTP request to server
[22:48:49] (Got status 503)
[22:48:49] + Could not connect to Work Server (results)
[22:48:49] (171.65.103.162:8080)
[22:48:49] - Error: Could not transmit unit 05 (completed December 17) to work server.
[22:48:49] Keeping unit 05 in queue.
[22:48:49] + Attempting to send results
[22:48:49] - Couldn't send HTTP request to server
[22:48:49] (Got status 503)
[22:48:49] + Could not connect to Work Server (results)
[22:48:49] (171.65.103.162:8080)
[22:48:49] - Error: Could not transmit unit 05 (completed December 17) to work server.
[22:48:49] + Attempting to send results
[22:49:02] - Couldn't send HTTP request to server
[22:49:02] + Could not connect to Work Server (results)
[22:49:02] (171.65.103.100:8080)
[22:49:02] Could not transmit unit 05 to Collection server; keeping in queue.
[22:49:02] - Preparing to get new work unit...
[22:49:02] + Attempting to get work packet
[22:49:02] - Connecting to assignment server
[22:49:03] - Successful: assigned to (171.65.103.162).
[22:49:03] + News From Folding@Home: Welcome to Folding@Home
[22:49:03] Loaded queue successfully.
[22:49:03] - Couldn't send HTTP request to server
[22:49:03] (Got status 503)
[22:49:03] + Could not connect to Work Server
[22:49:03] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[22:49:19] + Attempting to get work packet
[22:49:19] - Connecting to assignment server
[22:49:19] - Successful: assigned to (171.65.103.162).
[22:49:19] + News From Folding@Home: Welcome to Folding@Home
[22:49:19] Loaded queue successfully.
[22:49:19] + Could not connect to Work Server
[22:49:19] - Error: Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[22:49:30] + Attempting to get work packet
[22:49:30] - Connecting to assignment server
[22:49:30] - Successful: assigned to (171.65.103.162).
[22:49:30] + News From Folding@Home: Welcome to Folding@Home
[22:49:31] Loaded queue successfully.
[22:49:44] + Attempting to send results
[22:49:45] + Results successfully sent
[22:49:45] Thank you for your contribution to Folding@Home.
[22:49:45] + Closed connections
[22:49:50]
[22:49:50] + Processing work unit
[22:49:50] Core required: FahCore_78.exe
[22:49:50] Core found.
[22:49:50] Working on Unit 06 [December 17 22:49:50]
[22:49:50] + Working ...
[22:49:50]
[22:49:50] *------------------------------*
[22:49:50] Folding@Home Gromacs Core
[22:49:50] Version 1.90 (March 8, 2006)
[22:49:50]
[22:49:50] Preparing to commence simulation
[22:49:50] - Looking at optimizations...
[22:49:50] - Created dyn
[22:49:50] - Files status OK
[22:49:52] - Expanded 3062605 -> 16578209 (decompressed 541.3 percent)
[22:49:53] - Error: Bad work unit. Digital signatures don't match
[22:49:53] Error: Could not open work file
[22:49:53]
[22:49:53] Folding@home Core Shutdown: FILE_IO_ERROR
[22:49:56] CoreStatus = 75 (117)
[22:49:56] Error opening or reading from a file.
[22:49:56] Deleting current work unit & continuing...
[22:50:00] - Preparing to get new work unit...
[22:50:00] + Attempting to get work packet
[22:50:00] - Connecting to assignment server
[22:50:01] - Successful: assigned to (171.65.103.162).
[22:50:01] + News From Folding@Home: Welcome to Folding@Home
[22:50:01] Loaded queue successfully.
[22:50:01] - Couldn't send HTTP request to server
[22:50:01] (Got status 503)
[22:50:01] + Could not connect to Work Server
[22:50:01] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[22:50:13] + Attempting to get work packet
[22:50:13] - Connecting to assignment server
[22:50:13] - Successful: assigned to (171.65.103.162).
[22:50:13] + News From Folding@Home: Welcome to Folding@Home
[22:50:13] Loaded queue successfully.
[22:50:14] - Couldn't send HTTP request to server
[22:50:14] (Got status 503)
[22:50:14] + Could not connect to Work Server
[22:50:14] - Error: Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[22:50:27] + Attempting to get work packet
[22:50:27] - Connecting to assignment server
[22:50:27] - Successful: assigned to (171.65.103.162).
[22:50:27] + News From Folding@Home: Welcome to Folding@Home
[22:50:28] Loaded queue successfully.
[22:50:28] - Couldn't send HTTP request to server
[22:50:28] (Got status 503)
[22:50:28] + Could not connect to Work Server
[22:50:28] - Error: Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[22:50:53] + Attempting to get work packet
[22:50:53] - Connecting to assignment server
[22:50:53] - Successful: assigned to (171.65.103.162).
[22:50:53] + News From Folding@Home: Welcome to Folding@Home
[22:50:54] Loaded queue successfully.
[22:51:08] + Closed connections
[22:51:13]
[22:51:13] + Processing work unit
[22:51:13] Core required: FahCore_78.exe
[22:51:13] Core found.
[22:51:13] Working on Unit 07 [December 17 22:51:13]
[22:51:13] + Working ...
[22:51:13]
[22:51:13] *------------------------------*
[22:51:13] Folding@Home Gromacs Core
[22:51:13] Version 1.90 (March 8, 2006)
[22:51:13]
[22:51:13] Preparing to commence simulation
[22:51:13] - Looking at optimizations...
[22:51:13] - Created dyn
[22:51:13] - Files status OK
[22:51:15] - Expanded 3064234 -> 16578209 (decompressed 541.0 percent)
[22:51:16] - Error: Bad work unit. Digital signatures don't match
[22:51:16] Error: Could not open work file
[22:51:16]
[22:51:16] Folding@home Core Shutdown: FILE_IO_ERROR
[22:51:19] CoreStatus = 75 (117)
[22:51:19] Error opening or reading from a file.
[22:51:19] Deleting current work unit & continuing...
[22:51:23] - Preparing to get new work unit...
[22:51:23] + Attempting to get work packet
[22:51:23] - Connecting to assignment server
[22:51:24] - Successful: assigned to (171.65.103.162).
[22:51:24] + News From Folding@Home: Welcome to Folding@Home
[22:51:24] Loaded queue successfully.
[22:51:24] - Couldn't send HTTP request to server
[22:51:24] + Could not connect to Work Server
[22:51:24] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[22:51:37] + Attempting to get work packet
[22:51:37] - Connecting to assignment server
[22:51:37] - Successful: assigned to (171.65.103.162).
[22:51:37] + News From Folding@Home: Welcome to Folding@Home
[22:51:38] Loaded queue successfully.
[22:51:38] - Couldn't send HTTP request to server
[22:51:38] (Got status 503)
[22:51:38] + Could not connect to Work Server
[22:51:38] - Error: Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[22:51:49] + Attempting to get work packet
[22:51:49] - Connecting to assignment server
[22:51:49] - Successful: assigned to (171.65.103.162).
[22:51:49] + News From Folding@Home: Welcome to Folding@Home
[22:51:49] Loaded queue successfully.
[22:51:49] - Couldn't send HTTP request to server
[22:51:49] (Got status 503)
[22:51:49] + Could not connect to Work Server
[22:51:49] - Error: Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[22:52:13] + Attempting to get work packet
[22:52:13] - Connecting to assignment server
[22:52:14] - Successful: assigned to (171.65.103.162).
[22:52:14] + News From Folding@Home: Welcome to Folding@Home
[22:52:14] Loaded queue successfully.
[22:52:14] - Couldn't send HTTP request to server
[22:52:14] (Got status 503)
[22:52:14] + Could not connect to Work Server
[22:52:14] - Error: Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[22:53:07] + Attempting to get work packet
[22:53:07] - Connecting to assignment server
[22:53:08] - Successful: assigned to (171.65.103.162).
[22:53:08] + News From Folding@Home: Welcome to Folding@Home
[22:53:08] Loaded queue successfully.
[22:53:24] + Closed connections
[22:53:29]
[22:53:29] + Processing work unit
[22:53:29] Core required: FahCore_78.exe
[22:53:29] Core found.
[22:53:29] Working on Unit 08 [December 17 22:53:29]
[22:53:29] + Working ...
[22:53:29]
[22:53:29] *------------------------------*
[22:53:29] Folding@Home Gromacs Core
[22:53:29] Version 1.90 (March 8, 2006)
[22:53:29]
[22:53:29] Preparing to commence simulation
[22:53:29] - Looking at optimizations...
[22:53:29] - Created dyn
[22:53:29] - Files status OK
[22:53:31] - Expanded 3059582 -> 16578185 (decompressed 541.8 percent)
[22:53:32] - Error: Bad work unit. Digital signatures don't match
[22:53:32] Error: Could not open work file
[22:53:32]
[22:53:32] Folding@home Core Shutdown: FILE_IO_ERROR
[22:53:36] CoreStatus = 75 (117)
[22:53:36] Error opening or reading from a file.
[22:53:36] Deleting current work unit & continuing...
[22:53:40] - Preparing to get new work unit...
[22:53:40] + Attempting to get work packet
[22:53:40] - Connecting to assignment server
[22:53:40] - Successful: assigned to (171.65.103.162).
[22:53:40] + News From Folding@Home: Welcome to Folding@Home
[22:53:40] Loaded queue successfully.
[22:53:54] + Closed connections
[22:53:59]
[22:53:59] + Processing work unit
[22:53:59] Core required: FahCore_78.exe
[22:53:59] Core found.
[22:53:59] Working on Unit 09 [December 17 22:53:59]
[22:53:59] + Working ...
[22:53:59]
[22:53:59] *------------------------------*
[22:53:59] Folding@Home Gromacs Core
[22:53:59] Version 1.90 (March 8, 2006)
[22:53:59]
[22:53:59] Preparing to commence simulation
[22:53:59] - Looking at optimizations...
[22:53:59] - Created dyn
[22:53:59] - Files status OK
[22:54:01] - Expanded 3065348 -> 16578177 (decompressed 540.8 percent)
[22:54:01] - Error: Bad work unit. Digital signatures don't match
[22:54:01] Error: Could not open work file
[22:54:01]
[22:54:01] Folding@home Core Shutdown: FILE_IO_ERROR
[22:54:05] CoreStatus = 75 (117)
[22:54:05] Error opening or reading from a file.
[22:54:05] Deleting current work unit & continuing...
[22:54:09] - Preparing to get new work unit...
[22:54:09] + Attempting to get work packet
[22:54:09] - Connecting to assignment server
[22:54:09] - Successful: assigned to (171.65.103.162).
[22:54:09] + News From Folding@Home: Welcome to Folding@Home
[22:54:10] Loaded queue successfully.
[22:54:10] - Couldn't send HTTP request to server
[22:54:10] (Got status 503)
[22:54:10] + Could not connect to Work Server
[22:54:10] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[22:54:24] + Attempting to get work packet
[22:54:24] - Connecting to assignment server
[22:54:25] - Successful: assigned to (171.65.103.162).
[22:54:25] + News From Folding@Home: Welcome to Folding@Home
[22:54:25] Loaded queue successfully.
[22:54:25] - Couldn't send HTTP request to server
[22:54:25] + Could not connect to Work Server
[22:54:25] - Error: Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[22:54:46] + Attempting to get work packet
[22:54:46] - Connecting to assignment server
[22:54:46] - Successful: assigned to (171.65.103.162).
[22:54:46] + News From Folding@Home: Welcome to Folding@Home
[22:54:46] Loaded queue successfully.
[22:55:02] + Closed connections
[22:55:07]
[22:55:07] + Processing work unit
[22:55:07] Core required: FahCore_78.exe
[22:55:07] Core found.
[22:55:07] Working on Unit 00 [December 17 22:55:07]
[22:55:07] + Working ...
[22:55:07]
[22:55:07] *------------------------------*
[22:55:07] Folding@Home Gromacs Core
[22:55:07] Version 1.90 (March 8, 2006)
[22:55:07]
[22:55:07] Preparing to commence simulation
[22:55:07] - Looking at optimizations...
[22:55:07] - Created dyn
[22:55:07] - Files status OK
[22:55:09] - Expanded 3066748 -> 16578209 (decompressed 540.5 percent)
[22:55:10] - Error: Bad work unit. Digital signatures don't match
[22:55:10] Error: Could not open work file
[22:55:10]
[22:55:10] Folding@home Core Shutdown: FILE_IO_ERROR
[22:55:13] CoreStatus = 75 (117)
[22:55:13] Error opening or reading from a file.
[22:55:13] Deleting current work unit & continuing...
[22:55:17] - Preparing to get new work unit...
[22:55:17] + Attempting to get work packet
[22:55:17] - Connecting to assignment server
[22:55:18] - Successful: assigned to (171.65.103.162).
[22:55:18] + News From Folding@Home: Welcome to Folding@Home
[22:55:18] Loaded queue successfully.
[22:55:18] - Couldn't send HTTP request to server
[22:55:18] + Could not connect to Work Server
[22:55:18] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[22:55:31] + Attempting to get work packet
[22:55:31] - Connecting to assignment server
[22:55:31] - Successful: assigned to (171.65.103.162).
[22:55:31] + News From Folding@Home: Welcome to Folding@Home
[22:55:31] Loaded queue successfully.
[22:55:31] - Couldn't send HTTP request to server
[22:55:31] (Got status 503)
[22:55:31] + Could not connect to Work Server
[22:55:31] - Error: Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[22:55:53] + Attempting to get work packet
[22:55:53] - Connecting to assignment server
[22:55:53] - Successful: assigned to (171.65.103.162).
[22:55:53] + News From Folding@Home: Welcome to Folding@Home
[22:55:54] Loaded queue successfully.
[22:55:54] - Couldn't send HTTP request to server
[22:55:54] + Could not connect to Work Server
[22:55:54] - Error: Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[22:56:17] + Attempting to get work packet
[22:56:17] - Connecting to assignment server
[22:56:18] - Successful: assigned to (171.65.103.162).
[22:56:18] + News From Folding@Home: Welcome to Folding@Home
[22:56:18] Loaded queue successfully.
[22:56:18] - Couldn't send HTTP request to server
[22:56:18] (Got status 503)
[22:56:18] + Could not connect to Work Server
[22:56:18] - Error: Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[22:57:02] + Attempting to get work packet
[22:57:02] - Connecting to assignment server
[22:57:02] - Successful: assigned to (171.65.103.162).
[22:57:02] + News From Folding@Home: Welcome to Folding@Home
[22:57:03] Loaded queue successfully.
[22:57:20] + Closed connections
[22:57:25]
[22:57:25] + Processing work unit
[22:57:25] Core required: FahCore_78.exe
[22:57:25] Core found.
[22:57:25] Working on Unit 01 [December 17 22:57:25]
[22:57:25] + Working ...
[22:57:25]
[22:57:25] *------------------------------*
[22:57:25] Folding@Home Gromacs Core
[22:57:25] Version 1.90 (March 8, 2006)
[22:57:25]
[22:57:25] Preparing to commence simulation
[22:57:25] - Looking at optimizations...
[22:57:25] - Created dyn
[22:57:25] - Files status OK
[22:57:27] - Expanded 3065791 -> 16578185 (decompressed 540.7 percent)
[22:57:27] - Error: Bad work unit. Digital signatures don't match
[22:57:27] Error: Could not open work file
[22:57:27]
[22:57:27] Folding@home Core Shutdown: FILE_IO_ERROR
[22:57:31] CoreStatus = 75 (117)
[22:57:31] Error opening or reading from a file.
[22:57:31] Deleting current work unit & continuing...
[22:57:35] - Preparing to get new work unit...
[22:57:35] + Attempting to get work packet
[22:57:35] - Connecting to assignment server
[22:57:35] - Successful: assigned to (171.65.103.162).
[22:57:35] + News From Folding@Home: Welcome to Folding@Home
[22:57:35] Loaded queue successfully.
[22:57:48] + Closed connections
[22:57:53]
[22:57:53] + Processing work unit
[22:57:53] Core required: FahCore_78.exe
[22:57:53] Core found.
[22:57:53] Working on Unit 02 [December 17 22:57:53]
[22:57:53] + Working ...
[22:57:53]
[22:57:53] *------------------------------*
[22:57:53] Folding@Home Gromacs Core
[22:57:53] Version 1.90 (March 8, 2006)
[22:57:53]
[22:57:53] Preparing to commence simulation
[22:57:53] - Looking at optimizations...
[22:57:53] - Created dyn
[22:57:53] - Files status OK
[22:57:55] - Expanded 3065348 -> 16578177 (decompressed 540.8 percent)
[22:57:55] - Error: Bad work unit. Digital signatures don't match
[22:57:55] Error: Could not open work file
[22:57:55]
[22:57:55] Folding@home Core Shutdown: FILE_IO_ERROR
[22:57:59] CoreStatus = 75 (117)
[22:57:59] Error opening or reading from a file.
[22:57:59] Deleting current work unit & continuing...
[22:58:03] - Preparing to get new work unit...
[22:58:03] + Attempting to get work packet
[22:58:03] - Connecting to assignment server
[22:58:04] - Successful: assigned to (171.65.103.162).
[22:58:04] + News From Folding@Home: Welcome to Folding@Home
[22:58:04] Loaded queue successfully.
[22:58:27] + Closed connections
[22:58:32]
[22:58:32] + Processing work unit
[22:58:32] Core required: FahCore_78.exe
[22:58:32] Core found.
[22:58:32] Working on Unit 03 [December 17 22:58:32]
[22:58:32] + Working ...
[22:58:32]
[22:58:32] *------------------------------*
[22:58:32] Folding@Home Gromacs Core
[22:58:32] Version 1.90 (March 8, 2006)
[22:58:32]
[22:58:32] Preparing to commence simulation
[22:58:32] - Looking at optimizations...
[22:58:32] - Created dyn
[22:58:32] - Files status OK
[22:58:34] - Expanded 3063984 -> 16578233 (decompressed 541.0 percent)
[22:58:34] - Starting from initial work packet
[22:58:34]
[22:58:34] Project: 2418 (Run 32, Clone 94, Gen 8)
[22:58:34]
[22:58:34] Assembly optimizations on if available.
[22:58:34] Entering M.D.
[22:58:41] Protein: p2418_Ribo_Mg
[22:58:41]
[22:58:41] Writing local files
[22:58:44] Extra SSE boost OK.
[22:58:44] Writing local files
[22:58:44] Completed 0 out of 250000 steps (0)
[22:59:15] Quit 101 - Fatal error: NaN detected: (ener[38])
[22:59:15]
[22:59:15] Simulation instability has been encountered. The run has entered a
[22:59:15] state from which no further progress can be made.
[22:59:15] This may be the correct result of the simulation, however if you
[22:59:15] often see other project units terminating early like this
[22:59:15] too, you may wish to check the stability of your computer (issues
[22:59:15] such as high temperature, overclocking, etc.).
[22:59:15] Going to send back what have done.
[22:59:15] logfile size: 7600
[22:59:15] - Writing 8163 bytes of core data to disk...
[22:59:15] ... Done.
[22:59:16]
[22:59:16] Folding@home Core Shutdown: EARLY_UNIT_END
[22:59:18] CoreStatus = 72 (114)
[22:59:18] Sending work to server
[22:59:18] + Attempting to send results
[22:59:19] + Results successfully sent
[22:59:19] Thank you for your contribution to Folding@Home.
[22:59:23] - Preparing to get new work unit...
[22:59:23] + Attempting to get work packet
[22:59:23] - Connecting to assignment server
[22:59:24] - Successful: assigned to (171.65.103.162).
[22:59:24] + News From Folding@Home: Welcome to Folding@Home
[22:59:24] Loaded queue successfully.
[22:59:36] + Closed connections
[22:59:41]
[22:59:41] + Processing work unit
[22:59:41] Core required: FahCore_78.exe
[22:59:41] Core found.
[22:59:41] Working on Unit 04 [December 17 22:59:41]
[22:59:41] + Working ...
[22:59:41]
[22:59:41] *------------------------------*
[22:59:41] Folding@Home Gromacs Core
[22:59:41] Version 1.90 (March 8, 2006)
[22:59:41]
[22:59:41] Preparing to commence simulation
[22:59:41] - Looking at optimizations...
[22:59:41] - Created dyn
[22:59:41] - Files status OK
[22:59:43] - Expanded 3066454 -> 16578209 (decompressed 540.6 percent)
[22:59:43] - Error: Bad work unit. Digital signatures don't match
[22:59:43] Error: Could not open work file
[22:59:43]
[22:59:43] Folding@home Core Shutdown: FILE_IO_ERROR
[22:59:47] CoreStatus = 75 (117)
[22:59:47] Error opening or reading from a file.
[22:59:47] Deleting current work unit & continuing...
[22:59:51] - Preparing to get new work unit...
[22:59:51] + Attempting to get work packet
[22:59:51] - Connecting to assignment server
[22:59:51] - Successful: assigned to (171.65.103.162).
[22:59:51] + News From Folding@Home: Welcome to Folding@Home
[22:59:52] Loaded queue successfully.
[23:00:03] + Closed connections
[23:00:08]
[23:00:08] + Processing work unit
[23:00:08] Core required: FahCore_78.exe
[23:00:08] Core found.
[23:00:08] Working on Unit 05 [December 17 23:00:08]
[23:00:08] + Working ...
[23:00:08]
[23:00:08] *------------------------------*
[23:00:08] Folding@Home Gromacs Core
[23:00:08] Version 1.90 (March 8, 2006)
[23:00:08]
[23:00:08] Preparing to commence simulation
[23:00:08] - Looking at optimizations...
[23:00:08] - Created dyn
[23:00:08] - Files status OK
[23:00:10] - Expanded 3065450 -> 16578209 (decompressed 540.8 percent)
[23:00:11] - Error: Bad work unit. Digital signatures don't match
[23:00:11] Error: Could not open work file
[23:00:11]
[23:00:11] Folding@home Core Shutdown: FILE_IO_ERROR
[23:00:15] CoreStatus = 75 (117)
[23:00:15] Error opening or reading from a file.
[23:00:15] Deleting current work unit & continuing...
[23:00:19] - Preparing to get new work unit...
[23:00:19] + Attempting to get work packet
[23:00:19] - Connecting to assignment server
[23:00:19] - Successful: assigned to (171.65.103.162).
[23:00:19] + News From Folding@Home: Welcome to Folding@Home
[23:00:19] Loaded queue successfully.
[23:00:31] + Closed connections
[23:00:36]
[23:00:36] + Processing work unit
[23:00:36] Core required: FahCore_78.exe
[23:00:36] Core found.
[23:00:36] Working on Unit 06 [December 17 23:00:36]
[23:00:36] + Working ...
[23:00:36]
[23:00:36] *------------------------------*
[23:00:36] Folding@Home Gromacs Core
[23:00:36] Version 1.90 (March 8, 2006)
[23:00:36]
[23:00:36] Preparing to commence simulation
[23:00:36] - Looking at optimizations...
[23:00:36] - Created dyn
[23:00:36] - Files status OK
[23:00:38] - Expanded 3062407 -> 16578209 (decompressed 541.3 percent)
[23:00:38] - Error: Bad work unit. Digital signatures don't match
[23:00:38] Error: Could not open work file
[23:00:38]
[23:00:38] Folding@home Core Shutdown: FILE_IO_ERROR
[23:00:42] CoreStatus = 75 (117)
[23:00:42] Error opening or reading from a file.
[23:00:42] Deleting current work unit & continuing...
[23:00:46] - Preparing to get new work unit...
[23:00:46] + Attempting to get work packet
[23:00:46] - Connecting to assignment server
[23:00:47] - Successful: assigned to (171.65.103.162).
[23:00:47] + News From Folding@Home: Welcome to Folding@Home
[23:00:47] Loaded queue successfully.
[23:00:58] + Closed connections
[23:01:03]
[23:01:03] + Processing work unit
[23:01:03] Core required: FahCore_78.exe
[23:01:03] Core found.
[23:01:03] Working on Unit 07 [December 17 23:01:03]
[23:01:03] + Working ...
[23:01:04]
[23:01:04] *------------------------------*
[23:01:04] Folding@Home Gromacs Core
[23:01:04] Version 1.90 (March 8, 2006)
[23:01:04]
[23:01:04] Preparing to commence simulation
[23:01:04] - Looking at optimizations...
[23:01:04] - Created dyn
[23:01:04] - Files status OK
[23:01:06] - Expanded 3062107 -> 16578209 (decompressed 541.3 percent)
[23:01:06] - Error: Bad work unit. Digital signatures don't match
[23:01:06] Error: Could not open work file
[23:01:06]
[23:01:06] Folding@home Core Shutdown: FILE_IO_ERROR
[23:01:10] CoreStatus = 75 (117)
[23:01:10] Error opening or reading from a file.
[23:01:10] Deleting current work unit & continuing...
[23:01:14] - Preparing to get new work unit...
[23:01:14] + Attempting to get work packet
[23:01:14] - Connecting to assignment server
[23:01:14] - Successful: assigned to (171.65.103.162).
[23:01:14] + News From Folding@Home: Welcome to Folding@Home
[23:01:14] Loaded queue successfully.
[23:01:28] + Closed connections
[23:01:33]
[23:01:33] + Processing work unit
[23:01:33] Core required: FahCore_78.exe
[23:01:33] Core found.
[23:01:33] Working on Unit 08 [December 17 23:01:33]
[23:01:33] + Working ...
[23:01:34]
[23:01:34] *------------------------------*
[23:01:34] Folding@Home Gromacs Core
[23:01:34] Version 1.90 (March 8, 2006)
[23:01:34]
[23:01:34] Preparing to commence simulation
[23:01:34] - Looking at optimizations...
[23:01:34] - Created dyn
[23:01:34] - Files status OK
[23:01:36] - Expanded 3065072 -> 16578209 (decompressed 540.8 percent)
[23:01:36] - Starting from initial work packet
[23:01:36]
[23:01:36] Project: 2418 (Run 33, Clone 55, Gen 8)
[23:01:36]
[23:01:36] Assembly optimizations on if available.
[23:01:36] Entering M.D.
[23:01:43] Protein: p2418_Ribo_Mg
[23:01:43]
[23:01:43] Writing local files
[23:01:45] Extra SSE boost OK.
[23:01:45] Writing local files
[23:01:46] Completed 0 out of 250000 steps (0)
[23:03:13] Quit 101 - Fatal error: NaN detected: (ener[13])
[23:03:13]
[23:03:13] Simulation instability has been encountered. The run has entered a
[23:03:13] state from which no further progress can be made.
[23:03:13] This may be the correct result of the simulation, however if you
[23:03:13] often see other project units terminating early like this
[23:03:13] too, you may wish to check the stability of your computer (issues
[23:03:13] such as high temperature, overclocking, etc.).
[23:03:13] Going to send back what have done.
[23:03:13] logfile size: 7599
[23:03:13] - Writing 8162 bytes of core data to disk...
[23:03:13] ... Done.
[23:03:13]
[23:03:13] Folding@home Core Shutdown: EARLY_UNIT_END
[23:03:16] CoreStatus = 72 (114)
[23:03:16] Sending work to server
[23:03:16] + Attempting to send results
[23:03:16] - Couldn't send HTTP request to server
[23:03:16] (Got status 503)
[23:03:16] + Could not connect to Work Server (results)
[23:03:16] (171.65.103.162:8080)
[23:03:16] - Error: Could not transmit unit 08 (completed December 17) to work server.
[23:03:16] Keeping unit 08 in queue.
[23:03:16] + Attempting to send results
[23:03:16] - Couldn't send HTTP request to server
[23:03:16] (Got status 503)
[23:03:16] + Could not connect to Work Server (results)
[23:03:16] (171.65.103.162:8080)
[23:03:16] - Error: Could not transmit unit 08 (completed December 17) to work server.
[23:03:16] + Attempting to send results
[23:03:23] - Couldn't send HTTP request to server
[23:03:23] + Could not connect to Work Server (results)
[23:03:23] (171.65.103.100:8080)
[23:03:23] Could not transmit unit 08 to Collection server; keeping in queue.
[23:03:23] - Preparing to get new work unit...
[23:03:23] + Attempting to get work packet
[23:03:23] - Connecting to assignment server
[23:03:23] - Successful: assigned to (171.65.103.162).
[23:03:23] + News From Folding@Home: Welcome to Folding@Home
[23:03:24] Loaded queue successfully.
[23:03:37] + Attempting to send results
[23:03:38] + Results successfully sent
[23:03:38] Thank you for your contribution to Folding@Home.
[23:03:38] + Closed connections
[23:03:43]
[23:03:43] + Processing work unit
[23:03:43] Core required: FahCore_78.exe
[23:03:43] Core found.
[23:03:43] Working on Unit 09 [December 17 23:03:43]
[23:03:43] + Working ...
[23:03:43]
[23:03:43] *------------------------------*
[23:03:43] Folding@Home Gromacs Core
[23:03:43] Version 1.90 (March 8, 2006)
[23:03:43]
[23:03:43] Preparing to commence simulation
[23:03:43] - Looking at optimizations...
[23:03:43] - Created dyn
[23:03:43] - Files status OK
[23:03:45] - Expanded 3067124 -> 16578181 (decompressed 540.5 percent)
[23:03:46] - Error: Bad work unit. Digital signatures don't match
[23:03:46] Error: Could not open work file
[23:03:46]
[23:03:46] Folding@home Core Shutdown: FILE_IO_ERROR
[23:03:49] CoreStatus = 75 (117)
[23:03:49] Error opening or reading from a file.
[23:03:49] Deleting current work unit & continuing...
[23:03:53] - Preparing to get new work unit...
[23:03:53] + Attempting to get work packet
[23:03:53] - Connecting to assignment server
[23:03:54] - Successful: assigned to (171.65.103.162).
[23:03:54] + News From Folding@Home: Welcome to Folding@Home
[23:03:54] Loaded queue successfully.
[23:04:05] + Closed connections
[23:04:10]
[23:04:10] + Processing work unit
[23:04:10] Core required: FahCore_78.exe
[23:04:10] Core found.
[23:04:10] Working on Unit 00 [December 17 23:04:10]
[23:04:10] + Working ...
[23:04:10]
[23:04:10] *------------------------------*
[23:04:10] Folding@Home Gromacs Core
[23:04:10] Version 1.90 (March 8, 2006)
[23:04:10]
[23:04:10] Preparing to commence simulation
[23:04:10] - Looking at optimizations...
[23:04:10] - Created dyn
[23:04:10] - Files status OK
[23:04:12] - Expanded 3067124 -> 16578181 (decompressed 540.5 percent)
[23:04:13] - Starting from initial work packet
[23:04:13]
[23:04:13] Project: 2417 (Run 4, Clone 2, Gen 12)
[23:04:13]
[23:04:13] Assembly optimizations on if available.
[23:04:13] Entering M.D.
[23:04:20] Protein: p2417_Ribo_Cl
[23:04:20]
[23:04:20] Writing local files
[23:04:22] Extra SSE boost OK.
[23:04:22] Writing local files
[23:04:22] Completed 0 out of 250000 steps (0)
[23:05:00] Quit 101 - Fatal error: NaN detected: (ener[38])
[23:05:00]
[23:05:00] Simulation instability has been encountered. The run has entered a
[23:05:00] state from which no further progress can be made.
[23:05:00] This may be the correct result of the simulation, however if you
[23:05:00] often see other project units terminating early like this
[23:05:00] too, you may wish to check the stability of your computer (issues
[23:05:00] such as high temperature, overclocking, etc.).
[23:05:00] Going to send back what have done.
[23:05:00] logfile size: 7599
[23:05:00] - Writing 8162 bytes of core data to disk...
[23:05:00] ... Done.
[23:05:00]
[23:05:00] Folding@home Core Shutdown: EARLY_UNIT_END
[23:05:04] CoreStatus = 72 (114)
[23:05:04] Sending work to server
[23:05:04] + Attempting to send results
[23:05:05] + Results successfully sent
[23:05:05] Thank you for your contribution to Folding@Home.
[23:05:09] - Preparing to get new work unit...
[23:05:09] + Attempting to get work packet
[23:05:09] - Connecting to assignment server
[23:05:10] - Successful: assigned to (171.65.103.162).
[23:05:10] + News From Folding@Home: Welcome to Folding@Home
[23:05:10] Loaded queue successfully.
[23:05:10] - Couldn't send HTTP request to server
[23:05:10] (Got status 503)
[23:05:10] + Could not connect to Work Server
[23:05:10] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[23:05:16] + Attempting to get work packet
[23:05:16] - Connecting to assignment server
[23:05:16] - Successful: assigned to (171.65.103.162).
[23:05:16] + News From Folding@Home: Welcome to Folding@Home
[23:05:16] Loaded queue successfully.
[23:05:17] - Couldn't send HTTP request to server
[23:05:17] (Got status 503)
[23:05:17] + Could not connect to Work Server
[23:05:17] - Error: Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[23:05:33] + Attempting to get work packet
[23:05:33] - Connecting to assignment server
[23:05:34] - Successful: assigned to (171.65.103.162).
[23:05:34] + News From Folding@Home: Welcome to Folding@Home
[23:05:34] Loaded queue successfully.
[23:05:34] - Couldn't send HTTP request to server
[23:05:34] (Got status 503)
[23:05:34] + Could not connect to Work Server
[23:05:34] - Error: Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[23:05:56] + Attempting to get work packet
[23:05:56] - Connecting to assignment server
[23:05:57] - Successful: assigned to (171.65.103.162).
[23:05:57] + News From Folding@Home: Welcome to Folding@Home
[23:05:57] Loaded queue successfully.
[23:06:11] + Closed connections
[23:06:16]
[23:06:16] + Processing work unit
[23:06:16] Core required: FahCore_78.exe
[23:06:16] Core found.
[23:06:16] Working on Unit 01 [December 17 23:06:16]
[23:06:16] + Working ...
[23:06:16]
[23:06:16] *------------------------------*
[23:06:16] Folding@Home Gromacs Core
[23:06:16] Version 1.90 (March 8, 2006)
[23:06:16]
[23:06:16] Preparing to commence simulation
[23:06:16] - Looking at optimizations...
[23:06:16] - Created dyn
[23:06:16] - Files status OK
[23:06:18] - Expanded 3065995 -> 16578197 (decompressed 540.7 percent)
[23:06:19] - Error: Bad work unit. Digital signatures don't match
[23:06:19] Error: Could not open work file
[23:06:19]
[23:06:19] Folding@home Core Shutdown: FILE_IO_ERROR
[23:06:22] CoreStatus = 75 (117)
[23:06:22] Error opening or reading from a file.
[23:06:22] Deleting current work unit & continuing...
[23:06:26] - Preparing to get new work unit...
[23:06:26] + Attempting to get work packet
[23:06:26] - Connecting to assignment server
[23:06:27] - Successful: assigned to (171.65.103.162).
[23:06:27] + News From Folding@Home: Welcome to Folding@Home
[23:06:27] Loaded queue successfully.
[23:06:27] - Couldn't send HTTP request to server
[23:06:27] + Could not connect to Work Server
[23:06:27] - Error: Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[23:06:32] + Attempting to get work packet
[23:06:32] - Connecting to assignment server
[23:06:33] - Successful: assigned to (171.65.103.162).
[23:06:33] + News From Folding@Home: Welcome to Folding@Home
[23:06:33] Loaded queue successfully.
[23:06:48] + Closed connections
[23:06:53]
[23:06:53] + Processing work unit
[23:06:53] Core required: FahCore_78.exe
[23:06:53] Core found.
[23:06:53] Working on Unit 02 [December 17 23:06:53]
[23:06:53] + Working ...
[23:06:53]
[23:06:53] *------------------------------*
[23:06:53] Folding@Home Gromacs Core
[23:06:53] Version 1.90 (March 8, 2006)
[23:06:53]
[23:06:53] Preparing to commence simulation
[23:06:53] - Looking at optimizations...
[23:06:53] - Created dyn
[23:06:53] - Files status OK
[23:06:55] - Expanded 3067400 -> 16578197 (decompressed 540.4 percent)
[23:06:56] - Error: Bad work unit. Digital signatures don't match
[23:06:56] Error: Could not open work file
[23:06:56]
[23:06:56] Folding@home Core Shutdown: FILE_IO_ERROR
[23:07:00] CoreStatus = 75 (117)
[23:07:00] Error opening or reading from a file.
[23:07:00] Deleting current work unit & continuing...
[23:07:04] - Preparing to get new work unit...
[23:07:04] + Attempting to get work packet
[23:07:04] - Connecting to assignment server
[23:07:04] - Successful: assigned to (171.65.103.162).
[23:07:04] + News From Folding@Home: Welcome to Folding@Home
[23:07:04] Loaded queue successfully.
[23:07:04] - Couldn't send HTTP request to server
[23:07:04] (Got status 503)
[23:07:04] + Could not connect to Work Server
[23:07:04] - Error: Attempt #1 to get work failed, and no other work to do.