Folding Forum

Community driven support forum for Folding@home
https://foldingforum.org/

FAH can't find gpu, but thinks I have FOUR cpus... Help!

https://foldingforum.org/viewtopic.php?t=34822

Page 1 of 1

FAH can't find gpu, but thinks I have FOUR cpus... Help!

Posted: Sun Apr 26, 2020 12:47 am
by Harpo
First off, I'm new to folding but I am computer literate. Right now I've got five rigs folding 24/7, running about 6 million ppd between them. I'm really enjoying this, and I feel like I'm helping in a rather hopeless time. I just assembled rig #6, and v7.6.9 simply will not acknowledge that a gpu exists. I'm using a GTX 1660 ti for setup (and will change to 2x FirePro S10000 when I get it going), but right now the software simply does not work. In prior installations I've had similar problems, and all were resolved by replacing gpus.txt and/or adding a gpu slot in configurations.

But replacing gpus.txt did nothing on this rig, and every time I try to add a gpu the software adds a CPU! It now shows four (the rig only has one), and all are running different projects at abysmally slow rates, no hope of completion, and still no gpu. Here's a screenshot:https://ibb.co/ZK1W3Zw

Drivers are current, I'm doing the exact same things I did to cure the others, but nothing is working. Here's the log, any idea what to try next? This is getting very frustrating!

Code: Select all

*********************** Log Started 2020-04-24T13:52:35Z ***********************
13:52:35:****************************** FAHClient ******************************
13:52:35:        Version: 7.6.9
13:52:35:         Author: Joseph Coffland <joseph@cauldrondevelopment.com>
13:52:35:      Copyright: 2020 foldingathome.org
13:52:35:       Homepage: https://foldingathome.org/
13:52:35:           Date: Apr 17 2020
13:52:35:           Time: 11:13:06
13:52:35:       Revision: 398c2b17fa535e0cc6c9d10856b2154c32771646
13:52:35:         Branch: master
13:52:35:       Compiler: Visual C++ 2008
13:52:35:        Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
13:52:35:       Platform: win32 10
13:52:35:           Bits: 32
13:52:35:           Mode: Release
13:52:35:           Args: --open-web-control
13:52:35:         Config: C:\Users\matt\AppData\Roaming\FAHClient\config.xml
13:52:35:******************************** CBang ********************************
13:52:35:           Date: Apr 17 2020
13:52:35:           Time: 11:10:09
13:52:35:       Revision: 2fb0be7809c5e45287a122ca5fbc15b5ae859a3b
13:52:35:         Branch: master
13:52:35:       Compiler: Visual C++ 2008
13:52:35:        Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
13:52:35:       Platform: win32 10
13:52:35:           Bits: 32
13:52:35:           Mode: Release
13:52:35:******************************* System ********************************
13:52:35:            CPU: Intel(R) Core(TM) i7-9700K CPU @ 3.60GHz
13:52:35:         CPU ID: GenuineIntel Family 6 Model 158 Stepping 12
13:52:35:           CPUs: 8
13:52:35:         Memory: 31.92GiB
13:52:35:    Free Memory: 16.65GiB
13:52:35:        Threads: WINDOWS_THREADS
13:52:35:     OS Version: 6.2
13:52:35:    Has Battery: false
13:52:35:     On Battery: false
13:52:35:     UTC Offset: -4
13:52:35:            PID: 2924
13:52:35:            CWD: C:\Users\matt\AppData\Roaming\FAHClient
13:52:35:             OS: Windows 10 Enterprise
13:52:35:        OS Arch: AMD64
13:52:35:           GPUs: 0
13:52:35:  CUDA Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:7.5 Driver:11.0
13:52:35:OpenCL Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:1.2 Driver:445.87
13:52:35:  Win32 Service: false
13:52:35:******************************* libFAH ********************************
13:52:35:           Date: Apr 15 2020
13:52:35:           Time: 14:53:14
13:52:35:       Revision: 216968bc7025029c841ed6e36e81a03a316890d3
13:52:35:         Branch: master
13:52:35:       Compiler: Visual C++ 2008
13:52:35:        Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
13:52:35:       Platform: win32 10
13:52:35:           Bits: 32
13:52:35:           Mode: Release
13:52:35:***********************************************************************
13:52:36:<config>
13:52:36:  <!-- Folding Slot Configuration -->
13:52:36:  <cause v='COVID_19'/>
13:52:36:
13:52:36:  <!-- Network -->
13:52:36:  <proxy v=':8080'/>
13:52:36:
13:52:36:  <!-- Slot Control -->
13:52:36:  <power v='FULL'/>
13:52:36:
13:52:36:  <!-- User Information -->
13:52:36:  <passkey v='*****'/>
13:52:36:  <user v='mattwiese'/>
13:52:36:
13:52:36:  <!-- Folding Slots -->
13:52:36:  <slot id='0' type='CPU'>
13:52:36:    <paused v='true'/>
13:52:36:  </slot>
13:52:36:</config>
13:52:36:Trying to access database...
13:52:36:Successfully acquired database lock
13:52:36:Enabled folding slot 00: PAUSED cpu:8 (by user)
13:52:37:3:127.0.0.1:New Web session
13:53:24:13:127.0.0.1:New Web session
13:53:59:Clean exit

Re: No gpu, but FOUR cpus...

Posted: Sun Apr 26, 2020 1:33 am
by paulmd199
A couple things

o I wouldn't trust any of the time calculations until your projects hit 1%. 24hrs is just a placeholder. I have every reason to believe the projects will complete before they expire.
o What does the "system info" tab say? You should see at least one line that says "OpenCL Device N Platform:N Device:N Bus:N Slot:N Driver 445.87" if that line isn't present, it should be. Try restarting the computer, the client doesn't automatically recognize a new device after installation. After restarting, check for the presence of that line, if it appears, you're good. I would then command your projects to finish, and when they do, configure your slots.

Re: FAH can't find gpu, but thinks I have FOUR cpus... Help!

Posted: Sun Apr 26, 2020 1:57 am
by PantherX
The issue is the client not picking up the GPU in your system:
13:52:35: GPUs: 0
13:52:35: CUDA Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:7.5 Driver:11.0
13:52:35:OpenCL Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:1.2 Driver:445.87

Generally speaking, downloading the latest GPUs.txt file in C:\Users\matt\AppData\Roaming\FAHClient followed by a system restart should resolve the issue. If it doesn't can you please post some GPU-Z screenshots so we can see the device ID to ensure that it is in the GPUs.txt file?

Re: No gpu, but FOUR cpus...

Posted: Sun Apr 26, 2020 2:40 am
by Harpo
paulmd199 wrote:A couple things

o I wouldn't trust any of the time calculations until your projects hit 1%. 24hrs is just a placeholder. I have every reason to believe the projects will complete before they expire.
o What does the "system info" tab say? You should see at least one line that says "OpenCL Device N Platform:N Device:N Bus:N Slot:N Driver 445.87" if that line isn't present, it should be. Try restarting the computer, the client doesn't automatically recognize a new device after installation. After restarting, check for the presence of that line, if it appears, you're good. I would then command your projects to finish, and when they do, configure your slots.
Thank you for the quick response. The system info does now show an OpenCL device as you describe, but I think it's because I went searching in the software for answers and found a file called "config.xml". I edited it to match my other rigs, and it now shows the proper gpu waiting for a job.

I'm sure this kind of fix is not recommended, but it seems to have worked. I'm afraid this release is seriously broken, I can't imagine the average joe digging this deep. More likely there's a lot of people out there with hot cpus and idle gpus that think it's actually working.

Re: FAH can't find gpu, but thinks I have FOUR cpus... Help!

Posted: Sun Apr 26, 2020 2:46 am
by Harpo
PantherX wrote:The issue is the client not picking up the GPU in your system:
13:52:35: GPUs: 0
13:52:35: CUDA Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:7.5 Driver:11.0
13:52:35:OpenCL Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:1.2 Driver:445.87

Generally speaking, downloading the latest GPUs.txt file in C:\Users\matt\AppData\Roaming\FAHClient followed by a system restart should resolve the issue. If it doesn't can you please post some GPU-Z screenshots so we can see the device ID to ensure that it is in the GPUs.txt file?
I got it fixed by editing "config.xml" which I found in the directory. I changed it to match the file on my other single-gpu rigs, and it's now working. Perhaps not recommended, but it worked.

I was pretty sure the card ID wasn't the issue, I have used it before for folding. It's kind of a "place holder" while I finish refurbing the cards this rig was built for, two dual-gpu Firepro S10000's.

Re: FAH can't find gpu, but thinks I have FOUR cpus... Help!

Posted: Sun Apr 26, 2020 3:08 am
by PantherX
While I am glad that you sorted it out, it is weird as most donors placed the GPUs.txt file, reboot their system and they are off folding. However, something is unique about your system preventing you from having a comparatively smooth experience.

Re: FAH can't find gpu, but thinks I have FOUR cpus... Help!

Posted: Sun Apr 26, 2020 9:34 pm
by paulmd199
I think it's because I went searching in the software for answers and found a file called "config.xml". I edited it to match my other rigs, and it now shows the proper gpu waiting for a job.
I'm curious what happened to your CPU jobs once you edited the config file?

Re: FAH can't find gpu, but thinks I have FOUR cpus... Help!

Posted: Sun Apr 26, 2020 9:41 pm
by PantherX
Generally speaking, the WUs tries to find the next most suitable Slot. If it does, it will be assigned to it and will wait for its turn. If no suitable slot is found, it will be dumped.
All times are UTC
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited