9600GT detected but not working
Posted: Sun Mar 15, 2020 5:19 pm
hello,
I've installed Folding@home after many years since I used it to help with COVID research. CPU works flawlessly and chunks the jobs it gets assigned without problems. GPU is detected, marked as "ready" but does not get assigned anything. The log states the following (excerpt):
WU00:FS01:Connecting to 192.0.2.1:8080
WARNING:WU00:FS01:WorkServer connection failed on port 8080 trying 80
WU00:FS01:Connecting to 192.0.2.1:80
ERROR:WU00:FS01:Exception: Failed to connect to 192.0.2.1:80
I've tried everything I found on the Internet and your forums, including: reinstalling twice, deleting the GPU slot and recreating it, running MemtestG80 (for the sake of it) without any errors, verified that GPU list file is in my directory and including entries for my videocard (it has 0x10de:0x0622:2:0:G94 for GeForce 9600GT), running GPUCapsViewer's OpenCL demos to verify they run (and they do). My hardware ID is as follows:
PCI\VEN_10DE&DEV_0622&SUBSYS_827C1043&REV_A1
PCI\VEN_10DE&DEV_0622&SUBSYS_827C1043
PCI\VEN_10DE&DEV_0622&CC_030000
PCI\VEN_10DE&DEV_0622&CC_0300
I really don't know what I'm missing here and with my limited knowledge I'm at a dead point.. Hope for some help from you. Thanks for your amazing work.
Ivan Semenzato.
I've installed Folding@home after many years since I used it to help with COVID research. CPU works flawlessly and chunks the jobs it gets assigned without problems. GPU is detected, marked as "ready" but does not get assigned anything. The log states the following (excerpt):
WU00:FS01:Connecting to 192.0.2.1:8080
WARNING:WU00:FS01:WorkServer connection failed on port 8080 trying 80
WU00:FS01:Connecting to 192.0.2.1:80
ERROR:WU00:FS01:Exception: Failed to connect to 192.0.2.1:80
I've tried everything I found on the Internet and your forums, including: reinstalling twice, deleting the GPU slot and recreating it, running MemtestG80 (for the sake of it) without any errors, verified that GPU list file is in my directory and including entries for my videocard (it has 0x10de:0x0622:2:0:G94 for GeForce 9600GT), running GPUCapsViewer's OpenCL demos to verify they run (and they do). My hardware ID is as follows:
PCI\VEN_10DE&DEV_0622&SUBSYS_827C1043&REV_A1
PCI\VEN_10DE&DEV_0622&SUBSYS_827C1043
PCI\VEN_10DE&DEV_0622&CC_030000
PCI\VEN_10DE&DEV_0622&CC_0300
I really don't know what I'm missing here and with my limited knowledge I'm at a dead point.. Hope for some help from you. Thanks for your amazing work.
Ivan Semenzato.