Page 1 of 2
Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Sat Dec 15, 2007 3:22 am
by dschief
Imediate crashes of same WU
Code: Select all
[07:55:24] Connecting to http://171.64.65.56:8080/
[07:57:44] Posted data.
[07:57:44] Initial: 0000; - Uploaded at ~37 kB/s
[07:57:46] - Averaged speed for that direction ~38 kB/s
[07:57:46] + Results successfully sent
[07:57:46] Thank you for your contribution to Folding@Home.
[07:57:46] + Number of Units Completed: 21
[0]0:Return code = 18
[0]1:Return code = 0, signaled with Quit
[0]2:Return code = 0, signaled with Quit
[0]3:Return code = 18
[08:01:56] - Warning: Could not delete all work unit files (6): Core returned invalid code
[08:01:56] Trying to send all finished work units
[08:01:56] + No unsent completed units remaining.
[08:01:56] - Preparing to get new work unit...
[08:01:56] + Attempting to get work packet
[08:01:56] - Will indicate memory of 2012 MB
[08:01:56] - Connecting to assignment server
[08:01:56] Connecting to http://assign.stanford.edu:8080/
[08:01:56] Posted data.
[08:01:56] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[08:01:56] + News From Folding@Home: Welcome to Folding@Home
[08:01:56] Loaded queue successfully.
[08:01:56] Connecting to http://171.64.65.56:8080/
[08:01:59] Posted data.
[08:01:59] Initial: 0000; - Receiving payload (expected size: 2944241)
[08:02:17] - Downloaded at ~159 kB/s
[08:02:17] - Averaged speed for that direction ~155 kB/s
[08:02:17] + Received work.
[08:02:17] Trying to send all finished work units
[08:02:17] + No unsent completed units remaining.
[08:02:17] + Closed connections
[08:02:17]
[08:02:17] + Processing work unit
[08:02:17] Core required: FahCore_a1.exe
[08:02:17] Core found.
[08:02:18] Working on Unit 07 [December 15 08:02:18]
[08:02:18] + Working ...
[08:02:18] - Calling './mpiexec -np 4 -host 127.0.0.1 ./FahCore_a1.exe -dir work/ -suffix 07 -checkpoint 15 -verbose -lifeline 3503 -version 600'
[08:02:18]
[08:02:18] *------------------------------*
[08:02:18] Folding@Home Gromacs SMP Core
[08:02:18] Version 1.74 (November 27, 2006)
[08:02:18]
[08:02:18] Preparing to commence simulation
[08:02:18] - Ensuring status. Please wait.
[08:02:18] Created dyn
[08:02:18] - Files status OK
[08:02:18] - Expanded 2943729 -> 15158509 (decompressed 514.9 percent)
[08:02:19] - Starting from initial work packet
[08:02:19]
[08:02:19] Project: 2604 (Run 0, Clone 546, Gen 23)
[08:02:19]
[08:02:19] Assembly optimizations on if available.
[08:02:19] Entering M.D.
[08:02:36] percent)
[08:02:36] - Starting from initial work packet
[08:02:36]
[08:02:36] Project: 2604 (Run 0, Clone 546, Gen 23)
[08:02:36]
[08:02:36] Entering M.D.
NNODES=4, MYRANK=0, HOSTNAME=localhost.localdomain
NNODES=4, MYRANK=2, HOSTNAME=localhost.localdomain
NNODES=4, MYRANK=1, HOSTNAME=localhost.localdomain
NNODES=4, MYRANK=3, HOSTNAME=localhost.localdomain
NODEID=1 argc=15
NODEID=2 argc=15
NODEID=3 argc=15
NODEID=0 argc=15
Written by David van der Spoel, Erik Lindahl, Berk Hess, and others.
Copyright (c) 1991-2000, University of Groningen, The Netherlands.
Copyright (c) 2001-2004, The GROMACS development team,
check out http://www.gromacs.org for more information.
This inclusion of Gromacs code in the Folding@Home Core is under
a special license (see http://folding.stanford.edu/gromacs.html)
specially granted to Stanford by the copyright holders. If you
are interested in using Gromacs, visit http://www.gromacs.org where
you can download a free version of Gromacs under
the terms of the GNU General Public License (GPL) as published
by the Free Software Foundation; either version 2 of the License,
or (at your option) any later version.
[08:02:43] Protein: Protein in POPC
[08:02:43] Writing local files
starting mdrun 'Protein in POPC'
500000 steps, 1000.0 ps.
[08:02:43] Extra SSE boost OK.
[08:02:44] e Shutdown: INTERRUPTED
[cli_3]: aborting job:
Fatal error in MPI_Sendrecv: Error message texts are not available
[0]0:Return code = 0, signaled with Segmentation fault
[0]1:Return code = 0, signaled with Segmentation fault
[0]2:Return code = 0, signaled with Segmentation fault
[0]3:Return code = 1
[08:02:48] CoreStatus = 1 (1)
[08:02:48] Client-core communications error: ERROR 0x1
[08:02:48] Deleting current work unit & continuing...
[0]0:Return code = 0, signaled with Quit
[0]1:Return code = 18
[0]2:Return code = 0, signaled with Quit
[0]3:Return code = 0, signaled with Quit
[08:07:09] - Warning: Could not delete all work unit files (7): Core returned invalid code
[08:07:09] Trying to send all finished work units
[08:07:09] + No unsent completed units remaining.
[08:07:09] - Preparing to get new work unit...
[08:07:09] + Attempting to get work packet
[08:07:09] - Will indicate memory of 2012 MB
[08:07:09] - Connecting to assignment server
[08:07:09] Connecting to http://assign.stanford.edu:8080/
[08:07:09] Posted data.
[08:07:09] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[08:07:09] + News From Folding@Home: Welcome to Folding@Home
[08:07:10] Loaded queue successfully.
[08:07:10] Connecting to http://171.64.65.56:8080/
[08:07:12] Posted data.
[08:07:12] Initial: 0000; - Receiving payload (expected size: 2944241)
[08:07:31] - Downloaded at ~151 kB/s
[08:07:31] - Averaged speed for that direction ~154 kB/s
[08:07:31] + Received work.
[08:07:31] + Closed connections
[08:07:36]
[08:07:36] + Processing work unit
[08:07:36] Core required: FahCore_a1.exe
[08:07:36] Core found.
[08:07:36] Working on Unit 08 [December 15 08:07:36]
[08:07:36] + Working ...
[08:07:36] - Calling './mpiexec -np 4 -host 127.0.0.1 ./FahCore_a1.exe -dir work/ -suffix 08 -checkpoint 15 -verbose -lifeline 3503 -version 600'
[08:07:36]
[08:07:36] *------------------------------*
[08:07:36] Folding@Home Gromacs SMP Core
[08:07:36] Version 1.74 (November 27, 2006)
[08:07:36]
[08:07:36] Preparing to commence simulation
[08:07:36] - Ensuring status. Please wait.
[08:07:53] - Looking at optimizations...
[08:07:53] - Working with standard loops on this execution.
[08:07:53] - Previous termination of core was improper.
[08:07:53] - Going to use standard loops.
[08:07:53] - Files status OK
[08:07:54] (decompressed 514.9 percent)
[08:07:54] 9 (decompressed 514.9 percent)
[08:07:55] ne 54
[08:07:55] Project: 2604 (Run 0, Clone 546, Gen 23 2604 (Run 0, Clone 546, Gen 23)
[08:07:55]
[08:07:55] Entering M.D.
NNODES=4, MYRANK=2, HOSTNAME=localhost.localdomain
NNODES=4, MYRANK=0, HOSTNAME=localhost.localdomain
NNODES=4, MYRANK=1, HOSTNAME=localhost.localdomain
NNODES=4, MYRANK=3, HOSTNAME=localhost.localdomain
NODEID=2 argc=15
NODEID=3 argc=15
NODEID=0 argc=15
NODEID=1 argc=15
Written by David van der Spoel, Erik Lindahl, Berk Hess, and others.
Copyright (c) 1991-2000, University of Groningen, The Netherlands.
Copyright (c) 2001-2004, The GROMACS development team,
check out http://www.gromacs.org for more information.
This inclusion of Gromacs code in the Folding@Home Core is under
a special license (see http://folding.stanford.edu/gromacs.html)
specially granted to Stanford by the copyright holders. If you
are interested in using Gromacs, visit http://www.gromacs.org where
you can download a free version of Gromacs under
the terms of the GNU General Public License (GPL) as published
by the Free Software Foundation; either version 2 of the License,
or (at your option) any later version.
starting mdrun 'Protein in POPC'
500000 steps, 1000.0 ps.
[08:08:02] rotein in POPC
[08:08:02] Writing local files
[08:08:02] cal files
[08:08:02] boost OK.
[08:08:02] Writing local files
[08:08:03] output
[08:08:03] d 0 out of 500000 steps (0 percent)
[08:08:03]
[08:08:03] Folding@home Core Shutdown: INTERRUPTED
[0]0:Return code = 102
[0]1:Return code = 0, signaled with Segmentation fault
[0]2:Return code = 0, signaled with Segmentation fault
[0]3:Return code = 0, signaled with Quit
[08:08:07] CoreStatus = 66 (102)
[08:08:07] + Shutdown requested by user. Exiting.***** Got a SIGTERM signal (15)
[08:08:07] Killing all core threads
Folding@Home Client Shutdown.
[jim@localhost fold]$
any other problems with this wu?
Posted: Sat Dec 15, 2007 9:02 pm
by Ivoshiee
Try to save this WU. If it is possible to test if it will fail on other system(s) as well, then it is possible to analyze it, isolate a cause of this error.
For example:
http://foldingforum.org/viewtopic.php?t=258
Posted: Mon Dec 17, 2007 6:00 pm
by Tigerbiten
Same thing happened to me.
First run ...............
Code: Select all
[16:44:50] - Preparing to get new work unit...
[16:44:50] + Attempting to get work packet
[16:44:50] - Connecting to assignment server
[16:44:50] - Successful: assigned to (171.64.65.56).
[16:44:50] + News From Folding@Home: Welcome to Folding@Home
[16:44:50] Loaded queue successfully.
[16:44:58] + Closed connections
[16:44:58]
[16:44:58] + Processing work unit
[16:44:58] Core required: FahCore_a1.exe
[16:44:58] Core found.
[16:44:58] Working on Unit 04 [December 16 16:44:58]
[16:44:58] + Working ...
[16:44:59]
[16:44:59] *------------------------------*
[16:44:59] Folding@Home Gromacs SMP Core
[16:44:59] Version 1.74 (November 27, 2006)
[16:44:59]
[16:44:59] Preparing to commence simulation
[16:44:59] - Ensuring status. Please wait.
[16:44:59] - Expanded 2943729 -> 15158509 (decompressed 514.9 percent)
[16:44:59] - Starting from initial work packet
[16:44:59]
[16:44:59] Project: 2604 (Run 0, Clone 546, Gen 23)
[16:44:59]
[16:44:59] Assembly optimizations on if available.
[16:44:59] Entering M.D.
[16:45:17] percent)
[16:45:17] - Starting from initial work packet
[16:45:17]
[16:45:17] Project: 2604 (Run 0, Clone 546, Gen 23)
[16:45:17]
[16:45:17] Entering M.D.
[16:45:24] Protein: Protein in POPC
[16:45:24] Writing local files
[16:45:24] Extra SSE boost OK.
[16:45:25] Finalizing output
[16:45:29] CoreStatus = 0 (0)
[16:45:29] Client-core communications error: ERROR 0x0
[16:45:29] Deleting current work unit & continuing...
Second run ...............
Code: Select all
[16:49:55] - Preparing to get new work unit...
[16:49:55] + Attempting to get work packet
[16:49:55] - Connecting to assignment server
[16:49:56] - Successful: assigned to (171.64.65.56).
[16:49:56] + News From Folding@Home: Welcome to Folding@Home
[16:49:56] Loaded queue successfully.
[16:50:04] + Closed connections
[16:50:09]
[16:50:09] + Processing work unit
[16:50:09] Core required: FahCore_a1.exe
[16:50:09] Core found.
[16:50:09] Working on Unit 05 [December 16 16:50:09]
[16:50:09] + Working ...
[16:50:09]
[16:50:09] *------------------------------*
[16:50:09] Folding@Home Gromacs SMP Core
[16:50:09] Version 1.74 (November 27, 2006)
[16:50:09]
[16:50:09] Preparing to commence simulation
[16:50:09] - Ensuring status. Please wait.
[16:50:26] - Looking at optimizations...
[16:50:26] - Working with standard loops on this execution.
[16:50:26] - Previous termination of core was improper.
[16:50:26] - Going to use standard loops.
[16:50:26] - Files status OK
[16:50:28] (decompressed 514.9 percent)
[16:50:28] 9 (decompressed 514.9 percent)
[16:50:28] cket
[16:50:28]
[16:50:28] Project: 26Entering M.D.
[16:50:28] ne 546, Gen 23)
[16:50:28]
[16:50:28] Entering M.D.
[16:50:28] ne 546, Gen 23)
[16:50:28]
[16:50:28] Entering M.D.
[16:50:35] Protein: Protein in POPC
[16:50:35] Writing local files
[16:50:36] ompleted 0 out of 50Finalizing output
[16:50:36] cent)
[16:50:36]
[16:50:36] Folding@home Core Shutdown: INTERRUPTED
[16:50:40] CoreStatus = 66 (102)
[16:50:40] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.
Restarted ...............
Code: Select all
[17:02:13] Loaded queue successfully.
[17:02:13]
[17:02:13] + Processing work unit
[17:02:13] Core required: FahCore_a1.exe
[17:02:13] Core found.
[17:02:13] Working on Unit 05 [December 16 17:02:13]
[17:02:13] + Working ...
[17:02:13]
[17:02:13] *------------------------------*
[17:02:13] Folding@Home Gromacs SMP Core
[17:02:13] Version 1.74 (November 27, 2006)
[17:02:13]
[17:02:13] Preparing to commence simulation
[17:02:13] - Ensuring status. Please wait.
[17:02:14]
[17:02:14] Project: 2604 (Run 0, Clone 546, Gen 23)
[17:02:14]
[17:02:14] Assembly optimizations on if available.
[17:02:14] Entering M.D.
[17:02:31] - Expanded 2943729 -> 15158509 (decompressed 514.9 percent)
[17:02:31]
[17:02:31] Project: 2604 (Run 0, Clone 546, Gen 23)
[17:02:31]
[17:02:31] Entering M.D.
[17:02:39] Protein: Protein in POPC
[17:02:39] Writing local files
[17:02:40] Extra SSE boost OK.
[17:02:40] Finalizing output
[17:02:40] nt)
[17:02:40]
[17:02:40] Folding@home Core Shutdown: INTERRUPTED
Its just sitting there doing nothing now.
Moved to another box ............
Code: Select all
[17:51:04] Working on Unit 05 [December 17 17:51:04]
[17:51:04] + Working ...
[17:51:04]
[17:51:04] *------------------------------*
[17:51:04] Folding@Home Gromacs SMP Core
[17:51:04] Version 1.74 (November 27, 2006)
[17:51:04]
[17:51:04] Preparing to commence simulation
[17:51:04] - Ensuring status. Please wait.
[17:51:21] - Looking at optimizations...
[17:51:21] - Working with standard loops on this execution.
[17:51:21] - Previous termination of core was improper.
[17:51:21] - Going to use standard loops.
[17:51:21] - Files status OK
[17:51:22] Run 0, Clone 546, Gen 23)
[17:51:22]
[17:51:22] Entering M.D.
[17:51:22] 04 (Run 0, Clone 54
[17:51:22] Project: 26Entering M.D.
[17:51:22] ne 546, Gen 23)
[17:51:22]
[17:51:22] Entering M.D.
[17:51:29] Protein: Protein in POPC
[17:51:29] Writing local files
[17:51:30] Extra SSE boost OK.
[17:51:30] PC
[17:51:30] Writing local files
[17:51:30] Extra SSE boost OK.
[17:51:30] Writing local files
[17:51:30] Completed 0 out of 500000 steps (0 percent)
[17:51:34] CoreStatus = 1 (1)
[17:51:34] Client-core communications error: ERROR 0x1
[17:51:34] Deleting current work unit & continuing...
Folding@Home Client Shutdown.
I've the Work folder & Queue.dat file saved if any use.
Luck ..............
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Sun Dec 30, 2007 9:14 pm
by Tigerbiten
Just got this one again and its doing the same thing.
First run it shut down the cores.
Code: Select all
[20:00:18] Folding@Home Gromacs SMP Core
[20:00:18] Version 1.74 (November 27, 2006)
[20:00:18]
[20:00:18] Preparing to commence simulation
[20:00:18] - Ensuring status. Please wait.
[20:00:18] - Starting from initial work packet
[20:00:18]
[20:00:18] Project: 2604 (Run 0, Clone 546, Gen 23)
[20:00:18]
[20:00:18] Assembly optimizations on if available.
[20:00:18] Entering M.D.
[20:00:35] percent)
[20:00:35] - Starting from initial work packet
[20:00:35]
[20:00:35] Project: 2604 (Run 0, Clone 546, Gen 23)
[20:00:35]
[20:00:35] Entering M.D.
[20:00:43] Protein: Protein in POPC
[20:00:43] Writing local files
[20:00:43] t)
[20:00:43]
[20:00:43] Folding@home CorFinalizing output
[20:00:43] UPTED
Restarted.........
Code: Select all
[20:53:24] Project: 2604 (Run 0, Clone 546, Gen 23)
[20:53:24]
[20:53:24] Assembly optimizations on if available.
[20:53:24] Entering M.D.
[20:53:40] - Expanded 2943729 -> 15158509 (decompressed 514.9 percent)
[20:53:40]
[20:53:40] Project: 2604 (Run 0, Clone 546, Gen 23)
[20:53:40]
[20:53:41] Entering M.D.
[20:53:48] Protein: Protein in POPC
[20:53:48] Writing local files
[20:53:48] Extra SSE boost OK.
[20:53:49] Finalizing output
[20:53:49] nt)
[20:53:49]
[20:53:49] Folding@home Core Shutdown: INTERRUPTED
[20:58:27]
Now it either gives me ERROR 0x0 ...........
Code: Select all
[21:05:32] Project: 2604 (Run 0, Clone 546, Gen 23)
[21:05:32]
[21:05:32] 04 (Run 0, Clone 546, Gen 23)
[21:05:32]
[21:05:32] Entering M.D.
[21:05:33] ne 546, Gen 23)
[21:05:33]
[21:05:33] Entering M.D.
[21:05:39] Protein: Protein in POPC
[21:05:39] Writing local files
[21:05:40] Extra SSE boost OK.
[21:05:40] 0000 steps (0 percent)
[21:05:44] CoreStatus = 0 (0)
[21:05:44] Client-core communications error: ERROR 0x0
[21:05:44] Deleting current work unit & continuing...
or it shuts down the cores as second code section.
Luck ............
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Sat Jan 12, 2008 8:09 am
by Tigerbiten
I've just had this one again.
Still no luck at getting it to run ........
First attempt :--------
Code: Select all
[05:33:03] Project: 2604 (Run 0, Clone 546, Gen 23)
[05:33:03]
[05:33:03] Entering M.D.
[05:33:03] ne 546, Gen 23)
[05:33:03]
[05:33:03] Entering M.D.
[05:33:10] g local files
[05:33:10] Extra SSE boost OK.
[05:33:10] ocal files
[05:33:11] output
[05:33:11] ding@home Core Shutdown: INTERRUPTED
[05:33:15] CoreStatus = 66 (102)
[05:33:15] + Shutdown requested by user. Exiting.***** Got a SIGTERM signal (15)
[05:33:15] Killing all core threads
Folding@Home Client Shutdown.
Second go :------
Code: Select all
[07:30:24] Project: 2604 (Run 0, Clone 546, Gen 23)
[07:30:24]
[07:30:24] Assembly optimizations on if available.
[07:30:24] Entering M.D.
[07:30:42] al work packet
[07:30:42]
[07:30:42] Project: 2604 (Run 0, Clone 546, Gen 23)
[07:30:42]
[07:30:42] Entering M.D.
[07:30:42] ne 546, Gen 23)
[07:30:42]
[07:30:42] Entering M.D.
[07:30:49] g local files
[07:30:49] in in POPC
[07:30:49] Writing local files
[07:30:50] output
[07:30:50] SE boost OK.
[07:30:50] Finalizing output
Thrid :---------------
Code: Select all
[08:05:01] Project: 2604 (Run 0, Clone 546, Gen 23)
[08:05:01]
[08:05:01] Assembly optimizations on if available.
[08:05:01] Entering M.D.
[08:05:18] percent)
[08:05:18] - Starting from initial work packet
[08:05:18]
[08:05:18] Project: 2604 (Run 0, Clone 546, Gen 23)
[08:05:18]
[08:05:18] Entering M.D.
[08:05:24] Rejecting checkpoint
[08:05:25] Protein: Protein in POPC
[08:05:25] Writing local files
[08:05:26] Extra SSE boost OK.
[08:05:26] Writing local files
[08:05:26] Completed 0 out of 500000 steps (0 percent)
[08:05:26]
[08:05:26] Folding@home Core Shutdown: INTERRUPTED
Luck ..............
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Sat Jan 12, 2008 4:56 pm
by Flathead74
One of my teammates has also reported this WU as an immediate failure, with an error at 0%
Project: 2604 (Run 0, Clone 546, Gen 23)
[23:06:19] Completed 0 out of 500000 steps (0 percent).
[23:06:19] Folding@home Core Shutdown: INTERRUPTED
[23:06:23] CoreStatus = 1 (1)
[23:06:23] Client-core communications error: ERROR 0x1
[23:06:23] Deleting current work unit & continuing...
Sir_Loin - 1/2/2007
*3x and out. Downloaded new core.
E6550 @ 3360 / 2gb PC2-6400 1:1 / Ubuntu 7.1 on MSI G33M-FI
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Sun Jan 13, 2008 12:20 am
by VijayPande
We have manually stopped this PROJ/RUN/CLONE pending investigation on what's wrong.
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Sun Jan 13, 2008 3:44 pm
by oroborous
i've just picked this one up too, and got the same error.
[15:37:45] Project: 2604 (Run 0, Clone 546, Gen 23)
[15:37:45]
[15:37:45] Assembly optimizations on if available.
[15:37:45] Entering M.D.
[15:38:02] on if available.
[15:38:03] Entering M.D.
[15:38:11] Protein: Protein in POPC
[15:38:11] Writing local files
[15:38:12] oost OK.
[15:38:12] boost OK.
[15:38:14] al files
[15:38:14] Completed 0 out of 500000 steps (0 percent)
[15:38:19] CoreStatus = 1 (1)
[15:38:19] Client-core communications error: ERROR 0x1
[15:38:19] Deleting current work unit & continuing...
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Mon Jan 21, 2008 3:15 am
by Tigerbiten
Just got it again .........
Not very much of a change in output.
Attempt 1.
Code: Select all
[21:09:18] Project: 2604 (Run 0, Clone 546, Gen 23)
[21:09:18]
[21:09:18] Assembly optimizations on if available.
[21:09:18] Entering M.D.
[21:09:35] percent)
[21:09:35] - Starting from initial work packet
[21:09:35]
[21:09:35] Project: 2604 (Run 0, Clone 546, Gen 23)
[21:09:35]
[21:09:35] Entering M.D.
[21:09:42] Protein: Protein in POPC
[21:09:42] Writing local files
[21:09:43] Extra SSE boost OK.
[21:09:43] Finalizing output
[21:09:43] UPTED
Attempt 2.
Code: Select all
[23:19:00] Project: 2604 (Run 0, Clone 546, Gen 23)
[23:19:00]
[23:19:00] Entering M.D.
[23:19:07] rotein in POPC
[23:19:07] Writing local files
[23:19:07] cal files
[23:19:08] Extra SSE boost OK.
[23:19:08] Finalizing output
[23:19:08] d 0 out of 500000 steps (0 percent)
Attempt 3.
Worked no better than the first two.
Code: Select all
[23:23:25] Project: 2604 (Run 0, Clone 546, Gen 23)
[23:23:25]
[23:23:25] Entering M.D.
[23:23:32] Protein: Protein in POPC
[23:23:32] Writing local files
[23:23:33] output
[23:23:33] SE boost OK.
Luck .............
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Tue Jan 22, 2008 2:55 pm
by klasseng
Same thing happened just now to me:
[14:48:32] (0 percent)
[14:48:32] ost OK.
[14:48:32] @home Core Shutdown: INTERRUPTED
[cli_3]: aborting job:
Fatal error in MPI_Sendrecv: Error message texts are not available
[0]0:Return code = 102
[0]1:Return code = 0, signaled with Segmentation fault
[0]2:Return code = 0, signaled with Segmentation fault
[0]3:Return code = 1
[14:48:36] CoreStatus = 66 (102)
[14:48:36] + Shutdown requested by user. Exiting.***** Got a SIGTERM signal (15)
[14:48:36] Killing all core threads
Folding@Home Client Shutdown.
FAH6 beta, 8 core MacPro
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Tue Jan 22, 2008 3:00 pm
by klasseng
Would someone PLEASE remove this WU from the server . . . It's NOT working!
My machine just downloaded it again and failed again.
peace,
Grant
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Thu Jan 24, 2008 1:02 am
by klasseng
Got AGAIN today . . . crashed AGAIN today
WTF!
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Thu Jan 24, 2008 2:36 am
by sortofageek
Sent S.O.S.
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Thu Jan 24, 2008 2:40 am
by VijayPande
There seems to be something strange with the server code here, as we put in a manual STOP command several days ago on this WU. I've personally renamed the files associated with the WU (hiding it from the server code), so it should not be able to be assigned from here. It's a hack, but this has gone on too long I think everyone would agree.
Re: Project: 2604 (Run 0, Clone 546, Gen 23)
Posted: Thu Jan 24, 2008 3:50 am
by klasseng
Thank you for your attention to this Vijay!