Page 1 of 1
F@H Client issues
Posted: Tue Jun 14, 2016 3:30 am
by v-raze
Okay, so I'm relatively new to F@H and looking forward to contributing. I've created a group, gotten my friends involved, and started folding with my laptop. However, I wanted to get some serious work done by leaving my gaming desktop and it's 560 Ti GPU folding 24/7. However- when I tried to fold the first time, I left it overnight, and when I came back in the morning there was an error message saying the client had crashed but the system was still being fully utilized folding. I had to do a hard reset because I couldn't get the client to reopen. After reinstalling the client, I no longer had this issue, but instead the client doesn't even show up in the taskbar (though it is running when I check in task manager) and my browser crashes whenever I try to open it while the computer is folding so I can't pause it through the web client. I don't know what to do about this as I can fold, but when I want to stop folding it won't allow me to change any of the settings because the advanced client from the system tray is nowhere to be found and the web client won't work at all. I'm running Windows 10, on an Athlon II x4 640, 8gb RAM and a Zotac GTX 560 Ti.
Any help would be greatly appreciated!
Re: F@H Client issues
Posted: Tue Jun 14, 2016 3:36 am
by bruce
Welcome to the folding support forum, v-raze.
Is your system overclocked? If sounds like that might be the problem. Back off the overclock and see what happens.
FAH uses more resources that most other things you might be doing, so an overclock that's apparently stable running games will often be unstable when running FAH -- and lockups are one sigh of that condition.
(Also, see below)
Re: F@H Client issues
Posted: Tue Jun 14, 2016 7:29 pm
by v-raze
bruce wrote:Welcome to the folding support forum, v-raze.
Is your system overclocked? If sounds like that might be the problem. Back off the overclock and see what happens.
FAH uses more resources that most other things you might be doing, so an overclock that's apparently stable running games will often be unstable when running FAH -- and lockups are one sigh of that condition.
(Also, see below)
Yes, my system is ordinarily both overclocked (GPU) and undervolted (CPU). However, putting both back to stock clocks/voltages was one of the first things I tried- no beans. Still have the same problems.
Re: F@H Client issues
Posted: Tue Jun 14, 2016 8:04 pm
by artoar_11
bruce wrote:...........
(Also, see below)
@v-raze, read here:
How to provide enough info to get helpful support.
Re: F@H Client issues
Posted: Thu Jun 16, 2016 8:51 pm
by v-raze
I did read that, the first time. I can't get at the log file like I normally do because the icon is not visible, so I can't open advanced control by right clicking it. Is there another way to launch advanced control?
I'll get the logs manually from the folder but it might take me a while.
Re: F@H Client issues
Posted: Thu Jun 16, 2016 9:00 pm
by bollix47
Have you tried:
Start > All Apps > FAHClient > FAHControl
?
Re: F@H Client issues
Posted: Thu Jun 16, 2016 9:25 pm
by Joe_H
Or have you tried Method 3 in the Windows directions and opened the log file directly? It takes no more access to a computer than opening up FAHControl.
Re: F@H Client issues
Posted: Fri Jun 17, 2016 5:58 pm
by v-raze
bollix47 wrote:Have you tried:
Start > All Apps > FAHClient > FAHControl
?
Thank you. I'd been looking for something like that.
And yes, I know I can get the log file from the folder, just been busy is all, sorry.
I got it to work just fine set to medium (minus the icon still being gone), but when I turned it to full, all my programs crashed again. Only things I have open are MSI afterburner to monitor GPU temps, and chrome to watch my progress folding. I'll try running without afterburner open next...
Here's the log from that most recent attempt. It ends abruptly where I killed the client in task manager.
Code: Select all
*********************** Log Started 2016-06-17T03:05:07Z ***********************
03:05:07:************************* Folding@home Client *************************
03:05:07: Website: http://folding.stanford.edu/
03:05:07: Copyright: (c) 2009-2014 Stanford University
03:05:07: Author: Joseph Coffland <joseph@cauldrondevelopment.com>
03:05:07: Args:
03:05:07: Config: C:/Users/Val/AppData/Roaming/FAHClient/config.xml
03:05:07:******************************** Build ********************************
03:05:07: Version: 7.4.4
03:05:07: Date: Mar 4 2014
03:05:07: Time: 20:26:54
03:05:07: SVN Rev: 4130
03:05:07: Branch: fah/trunk/client
03:05:07: Compiler: Intel(R) C++ MSVC 1500 mode 1200
03:05:07: Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
03:05:07: /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
03:05:07: Platform: win32 XP
03:05:07: Bits: 32
03:05:07: Mode: Release
03:05:07:******************************* System ********************************
03:05:07: CPU: AMD Athlon(tm) II X4 640 Processor
03:05:07: CPU ID: AuthenticAMD Family 16 Model 5 Stepping 3
03:05:07: CPUs: 4
03:05:07: Memory: 7.75GiB
03:05:07: Free Memory: 6.12GiB
03:05:07: Threads: WINDOWS_THREADS
03:05:07: OS Version: 6.2
03:05:07: Has Battery: false
03:05:07: On Battery: false
03:05:07: UTC Offset: -4
03:05:07: PID: 4548
03:05:07: CWD: C:/Users/Val/AppData/Roaming/FAHClient
03:05:07: OS: Windows 10 Home
03:05:07: OS Arch: AMD64
03:05:07: GPUs: 2
03:05:07: GPU 0: UNSUPPORTED: RS880 [Radeon HD 4200]
03:05:07: GPU 1: NVIDIA:2 GF114 [GeForce GTX 560 Ti]
03:05:07: CUDA: 2.1
03:05:07: CUDA Driver: 8000
03:05:07:Win32 Service: false
03:05:07:***********************************************************************
03:05:07:<config>
03:05:07: <!-- User Information -->
03:05:07: <passkey v='********************************'/>
03:05:07: <team v='230975'/>
03:05:07: <user v='v-raze'/>
03:05:07:
03:05:07: <!-- Folding Slots -->
03:05:07: <slot id='0' type='CPU'/>
03:05:07: <slot id='1' type='GPU'/>
03:05:07:</config>
03:05:08:Trying to access database...
03:05:08:Successfully acquired database lock
03:05:08:Enabled folding slot 00: READY cpu:2
03:05:08:Enabled folding slot 01: READY gpu:1:GF114 [GeForce GTX 560 Ti]
03:05:08:WU04:FS00:Starting
03:05:08:WU04:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 04 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 2
03:05:08:WU04:FS00:Started FahCore on PID 4164
03:05:08:WU04:FS00:Core PID:476
03:05:08:WU04:FS00:FahCore 0xa4 started
03:05:08:WU01:FS01:Starting
03:05:08:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
03:05:08:WU01:FS01:Started FahCore on PID 4772
03:05:09:WU01:FS01:Core PID:364
03:05:09:WU01:FS01:FahCore 0x21 started
03:05:09:WU04:FS00:0xa4:
03:05:09:WU04:FS00:0xa4:*------------------------------*
03:05:09:WU04:FS00:0xa4:Folding@Home Gromacs GB Core
03:05:09:WU04:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
03:05:09:WU04:FS00:0xa4:
03:05:09:WU04:FS00:0xa4:Preparing to commence simulation
03:05:09:WU04:FS00:0xa4:- Ensuring status. Please wait.
03:05:09:WU01:FS01:0x21:*********************** Log Started 2016-06-17T03:05:09Z ***********************
03:05:09:WU01:FS01:0x21:Project: 10494 (Run 0, Clone 34, Gen 147)
03:05:09:WU01:FS01:0x21:Unit: 0x000000c18ca304f555de92a011bb248d
03:05:09:WU01:FS01:0x21:CPU: 0x00000000000000000000000000000000
03:05:09:WU01:FS01:0x21:Machine: 1
03:05:09:WU01:FS01:0x21:Digital signatures verified
03:05:09:WU01:FS01:0x21:Folding@home GPU Core21 Folding@home Core
03:05:09:WU01:FS01:0x21:Version 0.0.17
03:05:11:WU01:FS01:0x21: Found a checkpoint file
03:05:18:WU04:FS00:0xa4:- Looking at optimizations...
03:05:18:WU04:FS00:0xa4:- Working with standard loops on this execution.
03:05:18:WU04:FS00:0xa4:- Previous termination of core was improper.
03:05:18:WU04:FS00:0xa4:- Going to use standard loops.
03:05:18:WU04:FS00:0xa4:- Files status OK
03:05:18:WU04:FS00:0xa4:- Expanded 824929 -> 1398040 (decompressed 169.4 percent)
03:05:18:WU04:FS00:0xa4:Called DecompressByteArray: compressed_data_size=824929 data_size=1398040, decompressed_data_size=1398040 diff=0
03:05:18:WU04:FS00:0xa4:- Digital signature verified
03:05:18:WU04:FS00:0xa4:
03:05:18:WU04:FS00:0xa4:Project: 9039 (Run 73, Clone 2, Gen 285)
03:05:18:WU04:FS00:0xa4:
03:05:18:WU04:FS00:0xa4:Entering M.D.
03:05:24:WU04:FS00:0xa4:Mapping NT from 2 to 2
03:05:25:WU04:FS00:0xa4:Completed 0 out of 250000 steps (0%)
03:08:35:16:127.0.0.1:New Web connection
03:08:51:WU01:FS01:0x21:Completed 100000 out of 1000000 steps (10%)
03:08:51:WU01:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
03:12:08:WU04:FS00:0xa4:Completed 2500 out of 250000 steps (1%)
03:17:45:WU04:FS00:0xa4:Completed 5000 out of 250000 steps (2%)
03:23:06:WU04:FS00:0xa4:Completed 7500 out of 250000 steps (3%)
03:28:36:WU04:FS00:0xa4:Completed 10000 out of 250000 steps (4%)
03:31:12:WU01:FS01:0x21:Completed 110000 out of 1000000 steps (11%)
03:32:02:FS00:Shutting core down
03:32:04:WU04:FS00:0xa4:Client no longer detected. Shutting down core
03:32:04:WU04:FS00:0xa4:
03:32:04:WU04:FS00:0xa4:Folding@home Core Shutdown: CLIENT_DIED
03:32:04:WU04:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
03:32:05:WU04:FS00:Starting
03:32:05:WARNING:WU04:FS00:Changed SMP threads from 2 to 3 this can cause some work units to fail
03:32:05:WU04:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 04 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
03:32:05:WU04:FS00:Started FahCore on PID 5128
03:32:05:WU04:FS00:Core PID:920
03:32:05:WU04:FS00:FahCore 0xa4 started
03:32:05:WU04:FS00:0xa4:
03:32:05:WU04:FS00:0xa4:*------------------------------*
03:32:05:WU04:FS00:0xa4:Folding@Home Gromacs GB Core
03:32:05:WU04:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
03:32:05:WU04:FS00:0xa4:
03:32:05:WU04:FS00:0xa4:Preparing to commence simulation
03:32:05:WU04:FS00:0xa4:- Looking at optimizations...
03:32:05:WU04:FS00:0xa4:- Files status OK
03:32:05:WU04:FS00:0xa4:- Expanded 824929 -> 1398040 (decompressed 169.4 percent)
03:32:05:WU04:FS00:0xa4:Called DecompressByteArray: compressed_data_size=824929 data_size=1398040, decompressed_data_size=1398040 diff=0
03:32:05:WU04:FS00:0xa4:- Digital signature verified
03:32:05:WU04:FS00:0xa4:
03:32:05:WU04:FS00:0xa4:Project: 9039 (Run 73, Clone 2, Gen 285)
03:32:05:WU04:FS00:0xa4:
03:32:05:WU04:FS00:0xa4:Assembly optimizations on if available.
03:32:05:WU04:FS00:0xa4:Entering M.D.
03:32:11:WU04:FS00:0xa4:Using Gromacs checkpoints
03:32:11:WU04:FS00:0xa4:Mapping NT from 3 to 3
03:32:12:WU04:FS00:0xa4:Resuming from checkpoint
03:32:12:WU04:FS00:0xa4:Verified 04/wudata_01.log
03:32:12:WU04:FS00:0xa4:Verified 04/wudata_01.trr
03:32:12:WU04:FS00:0xa4:Verified 04/wudata_01.xtc
03:32:12:WU04:FS00:0xa4:Verified 04/wudata_01.edr
03:32:12:WU04:FS00:0xa4:Completed 6235 out of 250000 steps (2%)
03:32:35:Saving configuration to config.xml
03:32:35:<config>
03:32:35: <!-- Slot Control -->
03:32:35: <power v='FULL'/>
03:32:35:
03:32:35: <!-- User Information -->
03:32:35: <passkey v='********************************'/>
03:32:35: <team v='230975'/>
03:32:35: <user v='v-raze'/>
03:32:35:
03:32:35: <!-- Folding Slots -->
03:32:35: <slot id='0' type='CPU'/>
03:32:35: <slot id='1' type='GPU'/>
03:32:35:</config>
03:34:15:WU04:FS00:0xa4:Completed 7500 out of 250000 steps (3%)
03:38:14:WU04:FS00:0xa4:Completed 10000 out of 250000 steps (4%)
03:43:24:WU04:FS00:0xa4:Completed 12500 out of 250000 steps (5%)
03:47:20:WU04:FS00:0xa4:Completed 15000 out of 250000 steps (6%)
03:51:15:WU04:FS00:0xa4:Completed 17500 out of 250000 steps (7%)
03:52:08:WU01:FS01:0x21:Completed 120000 out of 1000000 steps (12%)
03:55:10:WU04:FS00:0xa4:Completed 20000 out of 250000 steps (8%)
03:59:04:WU04:FS00:0xa4:Completed 22500 out of 250000 steps (9%)
04:03:00:WU04:FS00:0xa4:Completed 25000 out of 250000 steps (10%)
04:06:54:WU04:FS00:0xa4:Completed 27500 out of 250000 steps (11%)
04:10:49:WU04:FS00:0xa4:Completed 30000 out of 250000 steps (12%)
04:13:04:WU01:FS01:0x21:Completed 130000 out of 1000000 steps (13%)
04:14:44:WU04:FS00:0xa4:Completed 32500 out of 250000 steps (13%)
04:18:38:WU04:FS00:0xa4:Completed 35000 out of 250000 steps (14%)
04:22:33:WU04:FS00:0xa4:Completed 37500 out of 250000 steps (15%)
04:26:28:WU04:FS00:0xa4:Completed 40000 out of 250000 steps (16%)
04:30:23:WU04:FS00:0xa4:Completed 42500 out of 250000 steps (17%)
04:33:57:WU01:FS01:0x21:Completed 140000 out of 1000000 steps (14%)
04:34:19:WU04:FS00:0xa4:Completed 45000 out of 250000 steps (18%)
04:38:13:WU04:FS00:0xa4:Completed 47500 out of 250000 steps (19%)
04:42:08:WU04:FS00:0xa4:Completed 50000 out of 250000 steps (20%)
04:46:02:WU04:FS00:0xa4:Completed 52500 out of 250000 steps (21%)
04:49:57:WU04:FS00:0xa4:Completed 55000 out of 250000 steps (22%)
04:53:52:WU04:FS00:0xa4:Completed 57500 out of 250000 steps (23%)
04:54:49:WU01:FS01:0x21:Completed 150000 out of 1000000 steps (15%)
04:57:47:WU04:FS00:0xa4:Completed 60000 out of 250000 steps (24%)
05:01:42:WU04:FS00:0xa4:Completed 62500 out of 250000 steps (25%)
05:05:38:WU04:FS00:0xa4:Completed 65000 out of 250000 steps (26%)
05:09:33:WU04:FS00:0xa4:Completed 67500 out of 250000 steps (27%)
05:13:29:WU04:FS00:0xa4:Completed 70000 out of 250000 steps (28%)
05:17:14:WU01:FS01:0x21:Completed 160000 out of 1000000 steps (16%)
05:17:24:WU04:FS00:0xa4:Completed 72500 out of 250000 steps (29%)
05:21:19:WU04:FS00:0xa4:Completed 75000 out of 250000 steps (30%)
05:25:13:WU04:FS00:0xa4:Completed 77500 out of 250000 steps (31%)
05:29:08:WU04:FS00:0xa4:Completed 80000 out of 250000 steps (32%)
05:33:03:WU04:FS00:0xa4:Completed 82500 out of 250000 steps (33%)
05:36:58:WU04:FS00:0xa4:Completed 85000 out of 250000 steps (34%)
05:38:06:WU01:FS01:0x21:Completed 170000 out of 1000000 steps (17%)
05:40:54:WU04:FS00:0xa4:Completed 87500 out of 250000 steps (35%)
05:44:50:WU04:FS00:0xa4:Completed 90000 out of 250000 steps (36%)
05:48:44:WU04:FS00:0xa4:Completed 92500 out of 250000 steps (37%)
05:52:38:WU04:FS00:0xa4:Completed 95000 out of 250000 steps (38%)
05:56:33:WU04:FS00:0xa4:Completed 97500 out of 250000 steps (39%)
05:58:59:WU01:FS01:0x21:Completed 180000 out of 1000000 steps (18%)
06:00:27:WU04:FS00:0xa4:Completed 100000 out of 250000 steps (40%)
06:04:22:WU04:FS00:0xa4:Completed 102500 out of 250000 steps (41%)
06:08:16:WU04:FS00:0xa4:Completed 105000 out of 250000 steps (42%)
06:12:11:WU04:FS00:0xa4:Completed 107500 out of 250000 steps (43%)
06:16:05:WU04:FS00:0xa4:Completed 110000 out of 250000 steps (44%)
06:19:53:WU01:FS01:0x21:Completed 190000 out of 1000000 steps (19%)
06:20:00:WU04:FS00:0xa4:Completed 112500 out of 250000 steps (45%)
06:23:54:WU04:FS00:0xa4:Completed 115000 out of 250000 steps (46%)
06:27:47:WU04:FS00:0xa4:Completed 117500 out of 250000 steps (47%)
06:31:42:WU04:FS00:0xa4:Completed 120000 out of 250000 steps (48%)
06:35:36:WU04:FS00:0xa4:Completed 122500 out of 250000 steps (49%)
06:39:31:WU04:FS00:0xa4:Completed 125000 out of 250000 steps (50%)
06:40:45:WU01:FS01:0x21:Completed 200000 out of 1000000 steps (20%)
06:43:25:WU04:FS00:0xa4:Completed 127500 out of 250000 steps (51%)
06:47:20:WU04:FS00:0xa4:Completed 130000 out of 250000 steps (52%)
06:51:16:WU04:FS00:0xa4:Completed 132500 out of 250000 steps (53%)
06:55:12:WU04:FS00:0xa4:Completed 135000 out of 250000 steps (54%)
06:59:06:WU04:FS00:0xa4:Completed 137500 out of 250000 steps (55%)
07:03:01:WU04:FS00:0xa4:Completed 140000 out of 250000 steps (56%)
07:03:08:WU01:FS01:0x21:Completed 210000 out of 1000000 steps (21%)
07:06:57:WU04:FS00:0xa4:Completed 142500 out of 250000 steps (57%)
07:10:52:WU04:FS00:0xa4:Completed 145000 out of 250000 steps (58%)
07:14:50:WU04:FS00:0xa4:Completed 147500 out of 250000 steps (59%)
07:19:09:WU04:FS00:0xa4:Completed 150000 out of 250000 steps (60%)
07:23:03:WU04:FS00:0xa4:Completed 152500 out of 250000 steps (61%)
07:24:01:WU01:FS01:0x21:Completed 220000 out of 1000000 steps (22%)
07:26:57:WU04:FS00:0xa4:Completed 155000 out of 250000 steps (62%)
07:30:52:WU04:FS00:0xa4:Completed 157500 out of 250000 steps (63%)
07:34:47:WU04:FS00:0xa4:Completed 160000 out of 250000 steps (64%)
07:38:41:WU04:FS00:0xa4:Completed 162500 out of 250000 steps (65%)
07:42:36:WU04:FS00:0xa4:Completed 165000 out of 250000 steps (66%)
07:44:53:WU01:FS01:0x21:Completed 230000 out of 1000000 steps (23%)
07:46:33:WU04:FS00:0xa4:Completed 167500 out of 250000 steps (67%)
07:50:29:WU04:FS00:0xa4:Completed 170000 out of 250000 steps (68%)
07:54:23:WU04:FS00:0xa4:Completed 172500 out of 250000 steps (69%)
07:58:18:WU04:FS00:0xa4:Completed 175000 out of 250000 steps (70%)
08:02:12:WU04:FS00:0xa4:Completed 177500 out of 250000 steps (71%)
08:05:45:WU01:FS01:0x21:Completed 240000 out of 1000000 steps (24%)
08:06:08:WU04:FS00:0xa4:Completed 180000 out of 250000 steps (72%)
08:10:04:WU04:FS00:0xa4:Completed 182500 out of 250000 steps (73%)
08:13:59:WU04:FS00:0xa4:Completed 185000 out of 250000 steps (74%)
08:17:54:WU04:FS00:0xa4:Completed 187500 out of 250000 steps (75%)
08:21:49:WU04:FS00:0xa4:Completed 190000 out of 250000 steps (76%)
08:25:45:WU04:FS00:0xa4:Completed 192500 out of 250000 steps (77%)
08:26:37:WU01:FS01:0x21:Completed 250000 out of 1000000 steps (25%)
08:29:40:WU04:FS00:0xa4:Completed 195000 out of 250000 steps (78%)
08:33:35:WU04:FS00:0xa4:Completed 197500 out of 250000 steps (79%)
08:37:30:WU04:FS00:0xa4:Completed 200000 out of 250000 steps (80%)
08:41:25:WU04:FS00:0xa4:Completed 202500 out of 250000 steps (81%)
08:45:20:WU04:FS00:0xa4:Completed 205000 out of 250000 steps (82%)
08:49:00:WU01:FS01:0x21:Completed 260000 out of 1000000 steps (26%)
08:49:16:WU04:FS00:0xa4:Completed 207500 out of 250000 steps (83%)
08:53:11:WU04:FS00:0xa4:Completed 210000 out of 250000 steps (84%)
08:57:06:WU04:FS00:0xa4:Completed 212500 out of 250000 steps (85%)
09:01:01:WU04:FS00:0xa4:Completed 215000 out of 250000 steps (86%)
09:04:57:WU04:FS00:0xa4:Completed 217500 out of 250000 steps (87%)
******************************* Date: 2016-06-17 *******************************
09:08:53:WU04:FS00:0xa4:Completed 220000 out of 250000 steps (88%)
09:09:53:WU01:FS01:0x21:Completed 270000 out of 1000000 steps (27%)
09:12:48:WU04:FS00:0xa4:Completed 222500 out of 250000 steps (89%)
09:16:43:WU04:FS00:0xa4:Completed 225000 out of 250000 steps (90%)
09:20:38:WU04:FS00:0xa4:Completed 227500 out of 250000 steps (91%)
09:24:33:WU04:FS00:0xa4:Completed 230000 out of 250000 steps (92%)
09:28:29:WU04:FS00:0xa4:Completed 232500 out of 250000 steps (93%)
09:30:46:WU01:FS01:0x21:Completed 280000 out of 1000000 steps (28%)
09:32:23:WU04:FS00:0xa4:Completed 235000 out of 250000 steps (94%)
09:36:19:WU04:FS00:0xa4:Completed 237500 out of 250000 steps (95%)
09:40:15:WU04:FS00:0xa4:Completed 240000 out of 250000 steps (96%)
09:44:12:WU04:FS00:0xa4:Completed 242500 out of 250000 steps (97%)
09:48:07:WU04:FS00:0xa4:Completed 245000 out of 250000 steps (98%)
09:51:38:WU01:FS01:0x21:Completed 290000 out of 1000000 steps (29%)
09:52:02:WU04:FS00:0xa4:Completed 247500 out of 250000 steps (99%)
09:52:03:WU00:FS00:Connecting to 171.67.108.45:8080
09:52:04:WU00:FS00:Assigned to work server 155.247.166.219
09:52:04:WU00:FS00:Requesting new work unit for slot 00: RUNNING cpu:3 from 155.247.166.219
09:52:04:WU00:FS00:Connecting to 155.247.166.219:8080
09:52:06:WU00:FS00:Downloading 116.73KiB
09:52:12:WU00:FS00:Download 54.83%
09:52:14:WU00:FS00:Download complete
09:52:14:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:6394 run:148 clone:31 gen:33 core:0xa4 unit:0x0000002c0002894b5462c6ebbbede615
09:55:56:WU04:FS00:0xa4:Completed 250000 out of 250000 steps (100%)
09:55:57:WU04:FS00:0xa4:DynamicWrapper: Finished Work Unit: sleep=10000
09:56:07:WU04:FS00:0xa4:
09:56:07:WU04:FS00:0xa4:Finished Work Unit:
09:56:07:WU04:FS00:0xa4:- Reading up to 811440 from "04/wudata_01.trr": Read 811440
09:56:07:WU04:FS00:0xa4:trr file hash check passed.
09:56:07:WU04:FS00:0xa4:- Reading up to 746188 from "04/wudata_01.xtc": Read 746188
09:56:07:WU04:FS00:0xa4:xtc file hash check passed.
09:56:07:WU04:FS00:0xa4:edr file hash check passed.
09:56:07:WU04:FS00:0xa4:logfile size: 24771
09:56:07:WU04:FS00:0xa4:Leaving Run
09:56:07:WU04:FS00:0xa4:- Writing 1584887 bytes of core data to disk...
09:56:07:WU04:FS00:0xa4:Done: 1584375 -> 1538274 (compressed to 97.0 percent)
09:56:07:WU04:FS00:0xa4: ... Done.
09:56:08:WU04:FS00:0xa4:- Shutting down core
09:56:08:WU04:FS00:0xa4:
09:56:08:WU04:FS00:0xa4:Folding@home Core Shutdown: FINISHED_UNIT
09:56:08:WU04:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
09:56:08:WU04:FS00:Sending unit results: id:04 state:SEND error:NO_ERROR project:9039 run:73 clone:2 gen:285 core:0xa4 unit:0x00000136ab436c9e569828ba7f83965b
09:56:08:WU04:FS00:Uploading 1.47MiB to 171.67.108.158
09:56:08:WU04:FS00:Connecting to 171.67.108.158:8080
09:56:08:WU00:FS00:Starting
09:56:08:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
09:56:10:WU00:FS00:Started FahCore on PID 4588
09:56:11:WU00:FS00:Core PID:4680
09:56:11:WU00:FS00:FahCore 0xa4 started
09:56:12:WU00:FS00:0xa4:
09:56:12:WU00:FS00:0xa4:*------------------------------*
09:56:12:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
09:56:12:WU00:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
09:56:12:WU00:FS00:0xa4:
09:56:12:WU00:FS00:0xa4:Preparing to commence simulation
09:56:12:WU00:FS00:0xa4:- Looking at optimizations...
09:56:12:WU00:FS00:0xa4:- Created dyn
09:56:12:WU00:FS00:0xa4:- Files status OK
09:56:12:WU00:FS00:0xa4:- Expanded 119019 -> 270156 (decompressed 226.9 percent)
09:56:12:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=119019 data_size=270156, decompressed_data_size=270156 diff=0
09:56:12:WU00:FS00:0xa4:- Digital signature verified
09:56:12:WU00:FS00:0xa4:
09:56:12:WU00:FS00:0xa4:Project: 6394 (Run 148, Clone 31, Gen 33)
09:56:12:WU00:FS00:0xa4:
09:56:12:WU00:FS00:0xa4:Assembly optimizations on if available.
09:56:12:WU00:FS00:0xa4:Entering M.D.
09:56:17:WU00:FS00:0xa4:Mapping NT from 3 to 3
09:56:18:WU00:FS00:0xa4:Completed 0 out of 5000000 steps (0%)
09:56:38:WU04:FS00:Upload 55.37%
09:56:48:WU04:FS00:Upload 59.63%
09:56:55:WU04:FS00:Upload 76.66%
09:57:02:WU04:FS00:Upload 89.44%
09:57:25:WU04:FS00:Upload complete
09:57:25:WU04:FS00:Server responded WORK_ACK (400)
09:57:25:WU04:FS00:Final credit estimate, 482.00 points
09:57:25:WU04:FS00:Cleaning up
10:01:43:WU00:FS00:0xa4:Completed 50000 out of 5000000 steps (1%)
10:07:06:WU00:FS00:0xa4:Completed 100000 out of 5000000 steps (2%)
10:12:29:WU00:FS00:0xa4:Completed 150000 out of 5000000 steps (3%)
10:12:31:WU01:FS01:0x21:Completed 300000 out of 1000000 steps (30%)
10:17:51:WU00:FS00:0xa4:Completed 200000 out of 5000000 steps (4%)
10:23:14:WU00:FS00:0xa4:Completed 250000 out of 5000000 steps (5%)
10:28:36:WU00:FS00:0xa4:Completed 300000 out of 5000000 steps (6%)
10:33:59:WU00:FS00:0xa4:Completed 350000 out of 5000000 steps (7%)
10:34:54:WU01:FS01:0x21:Completed 310000 out of 1000000 steps (31%)
10:39:21:WU00:FS00:0xa4:Completed 400000 out of 5000000 steps (8%)
10:44:45:WU00:FS00:0xa4:Completed 450000 out of 5000000 steps (9%)
10:50:08:WU00:FS00:0xa4:Completed 500000 out of 5000000 steps (10%)
10:55:31:WU00:FS00:0xa4:Completed 550000 out of 5000000 steps (11%)
10:55:45:WU01:FS01:0x21:Completed 320000 out of 1000000 steps (32%)
11:00:53:WU00:FS00:0xa4:Completed 600000 out of 5000000 steps (12%)
11:06:17:WU00:FS00:0xa4:Completed 650000 out of 5000000 steps (13%)
11:11:39:WU00:FS00:0xa4:Completed 700000 out of 5000000 steps (14%)
11:13:27:46:127.0.0.1:New Web connection
11:16:36:WU01:FS01:0x21:Completed 330000 out of 1000000 steps (33%)
11:17:13:WU00:FS00:0xa4:Completed 750000 out of 5000000 steps (15%)
11:22:46:WU00:FS00:0xa4:Completed 800000 out of 5000000 steps (16%)
11:28:12:WU00:FS00:0xa4:Completed 850000 out of 5000000 steps (17%)
11:33:35:WU00:FS00:0xa4:Completed 900000 out of 5000000 steps (18%)
11:37:28:WU01:FS01:0x21:Completed 340000 out of 1000000 steps (34%)
11:38:56:WU00:FS00:0xa4:Completed 950000 out of 5000000 steps (19%)
11:44:19:WU00:FS00:0xa4:Completed 1000000 out of 5000000 steps (20%)
11:49:41:WU00:FS00:0xa4:Completed 1050000 out of 5000000 steps (21%)
11:55:03:WU00:FS00:0xa4:Completed 1100000 out of 5000000 steps (22%)
11:58:19:WU01:FS01:0x21:Completed 350000 out of 1000000 steps (35%)
12:00:24:WU00:FS00:0xa4:Completed 1150000 out of 5000000 steps (23%)
12:05:45:WU00:FS00:0xa4:Completed 1200000 out of 5000000 steps (24%)
12:11:06:WU00:FS00:0xa4:Completed 1250000 out of 5000000 steps (25%)
12:16:27:WU00:FS00:0xa4:Completed 1300000 out of 5000000 steps (26%)
12:20:42:WU01:FS01:0x21:Completed 360000 out of 1000000 steps (36%)
12:21:48:WU00:FS00:0xa4:Completed 1350000 out of 5000000 steps (27%)
12:27:11:WU00:FS00:0xa4:Completed 1400000 out of 5000000 steps (28%)
12:32:40:WU00:FS00:0xa4:Completed 1450000 out of 5000000 steps (29%)
12:38:01:WU00:FS00:0xa4:Completed 1500000 out of 5000000 steps (30%)
12:41:33:WU01:FS01:0x21:Completed 370000 out of 1000000 steps (37%)
12:43:20:WU00:FS00:0xa4:Completed 1550000 out of 5000000 steps (31%)
12:48:39:WU00:FS00:0xa4:Completed 1600000 out of 5000000 steps (32%)
12:53:58:WU00:FS00:0xa4:Completed 1650000 out of 5000000 steps (33%)
12:59:17:WU00:FS00:0xa4:Completed 1700000 out of 5000000 steps (34%)
13:02:25:WU01:FS01:0x21:Completed 380000 out of 1000000 steps (38%)
13:04:37:WU00:FS00:0xa4:Completed 1750000 out of 5000000 steps (35%)
13:09:59:WU00:FS00:0xa4:Completed 1800000 out of 5000000 steps (36%)
13:15:20:WU00:FS00:0xa4:Completed 1850000 out of 5000000 steps (37%)
13:20:42:WU00:FS00:0xa4:Completed 1900000 out of 5000000 steps (38%)
13:23:16:WU01:FS01:0x21:Completed 390000 out of 1000000 steps (39%)
13:26:03:WU00:FS00:0xa4:Completed 1950000 out of 5000000 steps (39%)
13:31:22:WU00:FS00:0xa4:Completed 2000000 out of 5000000 steps (40%)
13:36:43:WU00:FS00:0xa4:Completed 2050000 out of 5000000 steps (41%)
13:42:05:WU00:FS00:0xa4:Completed 2100000 out of 5000000 steps (42%)
13:44:08:WU01:FS01:0x21:Completed 400000 out of 1000000 steps (40%)
13:47:28:WU00:FS00:0xa4:Completed 2150000 out of 5000000 steps (43%)
13:52:50:WU00:FS00:0xa4:Completed 2200000 out of 5000000 steps (44%)
13:58:12:WU00:FS00:0xa4:Completed 2250000 out of 5000000 steps (45%)
14:03:33:WU00:FS00:0xa4:Completed 2300000 out of 5000000 steps (46%)
14:06:31:WU01:FS01:0x21:Completed 410000 out of 1000000 steps (41%)
14:08:54:WU00:FS00:0xa4:Completed 2350000 out of 5000000 steps (47%)
14:11:43:73:127.0.0.1:New Web connection
14:12:01:WU02:FS00:Connecting to 171.67.108.45:8080
14:12:01:WU04:FS00:Connecting to 171.67.108.45:8080
14:12:04:WU02:FS00:Assigned to work server 171.67.108.158
14:12:04:WU02:FS00:Requesting new work unit for slot 00: RUNNING cpu:3 from 171.67.108.158
14:12:04:WU02:FS00:Connecting to 171.67.108.158:8080
14:12:04:WU04:FS00:Assigned to work server 171.67.108.158
14:12:04:WU04:FS00:Requesting new work unit for slot 00: RUNNING cpu:3 from 171.67.108.158
14:12:04:WU04:FS00:Connecting to 171.67.108.158:8080
14:12:04:WU02:FS00:Downloading 806.88KiB
14:12:04:WU04:FS00:Downloading 806.51KiB
14:12:10:WU04:FS00:Download 39.68%
14:12:11:WU02:FS00:Download 31.73%
14:12:16:WU04:FS00:Download 71.42%
14:12:18:WU02:FS00:Download 63.45%
14:12:24:WU04:FS00:Download 0.25%
14:12:24:WU02:FS00:Download 71.39%
14:12:25:WU04:FS00:Download complete
14:12:25:WU04:FS00:Received Unit: id:04 state:DOWNLOAD error:NO_ERROR project:9034 run:140 clone:2 gen:202 core:0xa4 unit:0x000000e9ab436c9e56983062488c2f60
14:12:27:WU02:FS00:Download complete
14:12:27:WU02:FS00:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:9036 run:714 clone:0 gen:146 core:0xa4 unit:0x000000abab436c9e56982c535adbed0f
14:27:24:WU01:FS01:0x21:Completed 420000 out of 1000000 steps (42%)
14:28:23:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
14:28:23:WARNING:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1073741783 = 0xc0000029)
14:28:23:WU02:FS00:Starting
14:28:23:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 02 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
14:28:23:WU02:FS00:Started FahCore on PID 5440
14:28:25:WU02:FS00:Core PID:4688
14:28:25:WU02:FS00:FahCore 0xa4 started
14:28:25:WU02:FS00:0xa4:
14:28:25:WU02:FS00:0xa4:*------------------------------*
14:28:25:WU02:FS00:0xa4:Folding@Home Gromacs GB Core
14:28:25:WU02:FS00:0xa4:Version 2.<^ (Dec. 15, 2010)
14:28:25:WU02:FS00:0xa4:
14:28:25:WU02:FS00:0xa4:Preparing to commence simulation
14:28:25:WU02:FS00:0xa4:- Looking at optimizations...
14:28:25:WU02:FS00:0xa4:- Created dyn
14:28:25:WU02:FS00:0xa4:- Files status OK
14:28:25:WU02:FS00:0xa4:- Expanded 825738 -> 1403132 (decompressed 169. percent)
14:28:25:WU02:FS00:0xa4:Called DecompressByteArray: compressed_data_size=825738 data_size=1403132, decompressed_data_size=1403132 diff=0
14:28:25:WU02:FS00:0xa4:- Digital signature verified
14:28:25:WU02:FS00:0xa4:
14:28:25:WU02:FS00:0xa4:Project: 9036 (Run 714, Clone 0, Gen 146)
14:28:25:WU02:FS00:0xa4:
14:28:25:WU02:FS00:0xa4:Assembly optimizations on if available.
14:28:25:WU02:FS00:0xa4:Entering M.D.
14:28:31:WU02:FS00:0xa4:Mapping NT from 3 to 3
14:28:31:WU02:FS00:0xa4:mdrun returned 255
14:28:31:WU02:FS00:0xa4:Going to send back what have done -- stepsTotalG=250000
14:28:31:WU02:FS00:0xa4:Work fraction=0.0000 steps=250000.
14:28:35:WU02:FS00:0xa4:logfile size=0 infoLength=0 edr=0 trr=25
14:28:35:WU02:FS00:0xa4:logfile size: 0 info=0 bed=0 hdr=25
14:28:35:WU02:FS00:0xa4:- Writing 640 bytes of core data to disk...
14:28:35:WU02:FS00:0xa4:Done: 128 -> 146 (compressed to 114.0 percent)
14:28:35:WU02:FS00:0xa4: ... Done.
14:28:35:WU02:FS00:0xa4:
14:28:35:WU02:FS00:0xa4:Folding@home Core Shutdown: EARLY_UNIT_END
14:28:36:WU00:FS00:Starting
14:28:36:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
14:28:36:WU00:FS00:Started FahCore on PID 4904
14:28:36:WU00:FS00:Core PID:5952
14:28:36:WU00:FS00:FahCore 0xa4 started
14:28:36:WARNING:WU02:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:28:36:WU02:FS00:Sending unit results: id:02 state:SEND error:FAULTY project:9036 run:714 clone:0 gen:146 core:0xa4 unit:0x000000abab436c9e56982c535adbed0f
14:28:36:WU02:FS00:Uploading 658B to 171.67.108.158
14:28:36:WU02:FS00:Connecting to 171.67.108.158:8080
14:28:36:WU00:FS00:0xa4:
14:28:36:WU00:FS00:0xa4:*------------------------------*
14:28:36:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
14:28:36:WU00:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
14:28:36:WU00:FS00:0xa4:
14:28:36:WU00:FS00:0xa4:Preparing to commence simulation
14:28:36:WU00:FS00:0xa4:- Ensuring status. Please wait.
14:28:37:WU02:FS00:Upload complete
14:28:37:WU02:FS00:Server responded WORK_ACK (400)
14:28:37:WU02:FS00:Cleaning up
14:28:45:WU00:FS00:0xa4:- Looking at optimizations...
14:28:45:WU00:FS00:0xa4:- Working with standard loops on this execution.
14:28:45:WU00:FS00:0xa4:- Previous termination of core was improper.
14:28:45:WU00:FS00:0xa4:- Files status OK
14:28:46:WU00:FS00:0xa4:- Expanded 119019 -> 270156 (decompressed 226.9 percent)
14:28:46:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=119019 data_size=270156, decompressed_data_size=270156 diff=0
14:28:46:WU00:FS00:0xa4:- Digital signature verified
14:28:46:WU00:FS00:0xa4:
14:28:46:WU00:FS00:0xa4:Project: 6394 (Run 148, Clone 31, Gen 33)
14:28:46:WU00:FS00:0xa4:
14:28:46:WU00:FS00:0xa4:Entering M.D.
14:28:51:WU00:FS00:0xa4:Using Gromacs checkpoints
14:28:52:WU00:FS00:0xa4:Mapping NT from 3 to 3
14:28:52:WU00:FS00:0xa4:Resuming from checkpoint
14:28:52:WU00:FS00:0xa4:Verified 00/wudata_01.log
14:28:52:WU00:FS00:0xa4:Verified 00/wudata_01.trr
14:28:52:WU00:FS00:0xa4:Verified 00/wudata_01.xtc
14:28:52:WU00:FS00:0xa4:Verified 00/wudata_01.edr
14:28:52:WU00:FS00:0xa4:Gromacs cannot continue further.
14:28:52:WU00:FS00:0xa4:Going to send back what have done -- stepsTotalG=5000000
14:28:52:WU00:FS00:0xa4:Work fraction=0.0000 steps=5000000.
14:28:56:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
14:28:56:WARNING:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1073741783 = 0xc0000029)
14:28:56:WU04:FS00:Starting
14:28:56:WU04:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 04 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
14:28:57:WU04:FS00:Started FahCore on PID 7160
14:28:57:WU04:FS00:Core PID:5992
14:28:57:WU04:FS00:FahCore 0xa4 started
14:28:57:WU04:FS00:0xa4:
14:28:57:WU04:FS00:0xa4:*------------------------------*
14:28:57:WU04:FS00:0xa4:Folding@Home Gromacs GB Core
14:28:57:WU04:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
14:28:57:WU04:FS00:0xa4:
14:28:57:WU04:FS00:0xa4:Preparing to commence simulation
14:28:57:WU04:FS00:0xa4:- Looking at optimizations...
14:28:57:WU04:FS00:0xa4:- Created dyn
14:28:57:WU04:FS00:0xa4:- Files status OK
14:28:57:WU04:FS00:0xa4:- Expanded 825354 -> 1401112 (decompressed 169.0 percent)
14:28:57:WU04:FS00:0xa4:Called DecompressByteArray: compressed_data_size=825354 data_size=1401112, decompressed_data_size=1401112 diff=0
14:28:57:WU04:FS00:0xa4:- Digital signature verified
14:28:57:WU04:FS00:0xa4:
14:28:57:WU04:FS00:0xa4:Project: 9034 (Run 140, Clone 2, Gen 202)
14:28:57:WU04:FS00:0xa4:
14:28:57:WU04:FS00:0xa4:Assembly optimizations on if available.
14:28:57:WU04:FS00:0xa4:Entering M.D.
14:29:03:WU04:FS00:0xa4:Mapping NT from 3 to 3
14:29:03:WU04:FS00:0xa4:mdrun returned 255
14:29:03:WU04:FS00:0xa4:Going to send back what have done -- stepsTotalG=250000
14:29:03:WU04:FS00:0xa4:Work fraction=0.0000 steps=250000.
14:29:07:WU04:FS00:0xa4:logfile size=0 infoLength=0 edr=0 trr=25
14:29:07:WU04:FS00:0xa4:logfile size: 0 info=0 bed=0 hdr=25
14:29:07:WU04:FS00:0xa4:- Writing 640 bytes of core data to disk...
14:29:07:WU04:FS00:0xa4:Done: 128 -> 147 (compressed to 114.8 percent)
14:29:07:WU04:FS00:0xa4: ... Done.
14:29:07:WU04:FS00:0xa4:
14:29:07:WU04:FS00:0xa4:Folding@home Core Shutdown: EARLY_UNIT_END
14:29:07:WARNING:WU04:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:29:07:WU04:FS00:Sending unit results: id:04 state:SEND error:FAULTY project:9034 run:140 clone:2 gen:202 core:0xa4 unit:0x000000e9ab436c9e56983062488c2f60
14:29:07:WU04:FS00:Uploading 659B to 171.67.108.158
14:29:07:WU04:FS00:Connecting to 171.67.108.158:8080
14:29:10:WU04:FS00:Upload complete
14:29:10:WU04:FS00:Server responded WORK_ACK (400)
14:29:10:WU04:FS00:Cleaning up
14:29:36:WU00:FS00:Starting
14:29:36:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
14:29:36:WU00:FS00:Started FahCore on PID 3252
14:29:36:WU00:FS00:Core PID:4664
14:29:36:WU00:FS00:FahCore 0xa4 started
14:29:36:WU00:FS00:0xa4:
14:29:36:WU00:FS00:0xa4:*------------------------------*
14:29:36:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
14:29:36:WU00:FS00:0xa4:Version 2.00 (Dec. 15, 2010)
14:29:36:WU00:FS00:0xa4:
14:29:36:WU00:FS00:0xa4:Preparing to commence simulation
14:29:36:WU00:FS00:0xa4:- Ensuring status. Please wait.
14:29:46:WU00:FS00:0xa4:- Looking at optimizations...
14:29:46:WU00:FS00:0xa4:- Working with standard loops on this execution.
14:29:46:WU00:FS00:0xa4:- Previous termination of core was improper.
14:29:46:WU00:FS00:0xa4:- Going to use standard loops.
14:29:46:WU00:FS00:0xa4:- Files status OK
14:29:46:WU00:FS00:0xa4:- Expanded 119019 -> 270156 (decompressed 226.9 percent)
14:29:46:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=119019 data_size=270156, decompressed_data_size=270156 diff=0
14:29:46:WU00:FS00:0xa4:- Digital signature verified
14:29:46:WU00:FS00:0xa4:
14:29:46:WU00:FS00:0xa4:Project: 6394 (Run 148, Clone 31, Gen 33)
14:29:46:WU00:FS00:0xa4:
14:29:46:WU00:FS00:0xa4:Entering M.D.
14:29:52:WU00:FS00:0xa4:Using Gromacs checkpoints
14:29:52:WU00:FS00:0xa4:Mapping NT from 3 to 3
14:29:52:WU00:FS00:0xa4:Resuming from checkpoint
14:29:52:WU00:FS00:0xa4:Verified 00/wudata_01.log
14:29:52:WU00:FS00:0xa4:Verified 00/wudata_01.trr
14:29:52:WU00:FS00:0xa4:Verified 00/wudata_01.xtc
14:29:52:WU00:FS00:0xa4:Verified 00/wudata_01.edr
14:29:52:WU00:FS00:0xa4:Gromacs cannot continue further.
14:29:52:WU00:FS00:0xa4:Going to send back what have done -- stepsTotalG=5000000
14:29:52:WU00:FS00:0xa4:Work fraction=0.0000 steps=5000000.
14:29:56:WU00:FS00:0xa4:logfile size=44980 infoLength=44980 edr=0 trr=23
14:29:56:WU00:FS00:0xa4:logfile size: 44980 info=44980 bed=0 hdr=23
14:29:56:WU00:FS00:0xa4:- Writing 45516 bytes of core data to disk...
14:29:56:WARNING:WU00:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:29:56:WU00:FS00:Sending unit results: id:00 state:SEND error:FAULTY project:6394 run:148 clone:31 gen:33 core:0xa4 unit:0x0000002c0002894b5462c6ebbbede615
14:29:56:WU00:FS00:Uploading 8.32KiB to 155.247.166.219
14:29:56:WU00:FS00:Connecting to 155.247.166.219:8080
14:29:57:WU00:FS00:Upload complete
14:29:57:WU02:FS00:Connecting to 171.67.108.45:8080
14:29:57:WU00:FS00:Server responded WORK_ACK (400)
14:29:57:WU00:FS00:Cleaning up
14:29:59:WU02:FS00:Assigned to work server 171.67.108.158
14:29:59:WU02:FS00:Requesting new work unit for slot 00: READY cpu:3 from 171.67.108.158
14:29:59:WU02:FS00:Connecting to 171.67.108.158:8080
14:30:00:WU02:FS00:Downloading 806.97KiB
14:30:06:WU02:FS00:Download 47.59%
14:30:11:WU02:FS00:Download complete
14:30:11:WU02:FS00:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:9034 run:594 clone:0 gen:287 core:0xa4 unit:0x0000013cab436c9e56982fa138645449
14:30:11:WU02:FS00:Starting
14:30:11:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 02 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
14:30:11:WU02:FS00:Started FahCore on PID 1896
14:30:11:WU02:FS00:Core PID:5004
14:30:11:WU02:FS00:FahCore 0xa4 started
14:30:11:WU02:FS00:0xa4:
14:30:11:WU02:FS00:0xa4:*------------------------------*
14:30:11:WU02:FS00:0xa4:Folding@Home Gromacs GB Core
14:30:11:WU02:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
14:30:11:WU02:FS00:0xa4:
14:30:11:WU02:FS00:0xa4:Preparing to commence simulation
14:30:11:WU02:FS00:0xa4:- Looking at optimizations...
14:30:11:WU02:FS00:0xa4:- Created dyn
14:30:11:WU02:FS00:0xa4:- Files status OK
14:30:11:WU02:FS00:0xa4:- Expanded 825827 -> 1401112 (decompressed 169.6 percent)
14:30:11:WU02:FS00:0xa4:Called DecompressByteArray: compressed_data_size=825827 data_size=1401112, decompressed_data_size=1401112 diff=0
14:30:11:WU02:FS00:0xa4:- Digital signature verified
14:30:11:WU02:FS00:0xa4:
14:30:11:WU02:FS00:0xa4:Project: 9034 (Run 594, Clone 0, Gen 287)
14:30:11:WU02:FS00:0xa4:
14:30:11:WU02:FS00:0xa4:Assembly optimizations on if available.
14:30:11:WU02:FS00:0xa4:Entering M.D.
14:30:17:WU02:FS00:0xa4:Mapping NT from 3 to 3
14:30:21:WARNING:WU02:FS00:FahCore returned an unknown error code which probably indicates that it crashed
14:30:21:WARNING:WU02:FS00:FahCore returned: UNKNOWN_ENUM (-1073741819 = 0xc0000005)
14:30:21:WU02:FS00:Starting
14:30:21:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 02 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
14:30:21:WU02:FS00:Started FahCore on PID 5296
14:30:21:WU02:FS00:Core PID:6772
14:30:21:WU02:FS00:FahCore 0xa4 started
14:30:21:WU02:FS00:0xa4:
14:30:21:WU02:FS00:0xa4:*------------------------------*
14:30:21:WU02:FS00:0xa4:Folding@Home Gromacs GB Core
14:30:21:WU02:FS00:0xa4:Version 1.27 (Dec. 15, 2010)
14:30:21:WU02:FS00:0xa4:
14:30:21:WU02:FS00:0xa4:Preparing to commence simulation
14:30:22:WU02:FS00:0xa4:- Ensuring status. Please wait.
14:30:31:WU02:FS00:0xa4:- Looking at optimizations...
14:30:31:WU02:FS00:0xa4:- Working with standard loops on this execution.
14:30:31:WU02:FS00:0xa4:- Previous termination of core was improper.
14:30:31:WU02:FS00:0xa4:- Files status OK
14:30:31:WU02:FS00:0xa4:- Expanded 825827 -> 1401112 (decompressed 169.6 percent)
14:30:31:WU02:FS00:0xa4:Called DecompressByteArray: compressed_data_size=825827 data_size=1401112, decompressed_data_size=1401112 diff=0
14:30:31:WU02:FS00:0xa4:- Digital signature verified
14:30:31:WU02:FS00:0xa4:
14:30:31:WU02:FS00:0xa4:Project: 9034 (Run 594, Clone 0, Gen 287)
14:30:31:WU02:FS00:0xa4:
14:30:31:WU02:FS00:0xa4:Entering M.D.
14:30:37:WU02:FS00:0xa4:Mapping NT from 3 to 3
14:30:37:WU02:FS00:0xa4:Gromacs cannot continue further.
14:30:37:WU02:FS00:0xa4:Going to send back what have done -- stepsTotalG=250000
14:30:37:WU02:FS00:0xa4:Work fraction=0.0000 steps=250000.
14:30:40:WARNING:WU02:FS00:FahCore returned an unknown error code which probably indicates that it crashed
14:30:40:WARNING:WU02:FS00:FahCore returned: UNKNOWN_ENUM (-1073741819 = 0xc0000005)
14:31:21:WU02:FS00:Starting
14:31:21:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 02 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
14:31:21:WU02:FS00:Started FahCore on PID 5812
14:31:21:WU02:FS00:Core PID:472
14:31:21:WU02:FS00:FahCore 0xa4 started
14:31:22:WU02:FS00:0xa4:
14:31:22:WU02:FS00:0xa4:*------------------------------*
14:31:22:WU02:FS00:0xa4:Folding@Home Gromacs GB Core
14:31:22:WU02:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
14:31:22:WU02:FS00:0xa4:
14:31:22:WU02:FS00:0xa4:Preparing to commence simulation
14:31:22:WU02:FS00:0xa4:- Ensuring status. Please wait.
14:31:31:WU02:FS00:0xa4:- Looking at optimizations...
14:31:31:WU02:FS00:0xa4:- Working with standard loops on this execution.
14:31:31:WU02:FS00:0xa4:- Previous termination of core was improper.
14:31:31:WU02:FS00:0xa4:- Going to use standard loops.
14:31:31:WU02:FS00:0xa4:- Files status OK
14:31:31:WU02:FS00:0xa4:- Expanded 825827 -> 1401112 (decompressed 169. percent)
14:31:31:WU02:FS00:0xa4:Called DecompressByteArray: compressed_data_size=825827 data_size=1401112, decompressed_data_size=1401112 diff=0
14:31:31:WU02:FS00:0xa4:- Digital signature verified
14:31:31:WU02:FS00:0xa4:
14:31:31:WU02:FS00:0xa4:Project: 9034 (Run 594, Clone 0, Gen 287)
14:31:31:WU02:FS00:0xa4:
14:31:31:WU02:FS00:0xa4:Entering M.D.
14:31:37:WU02:FS00:0xa4:Mapping NT from 3 to 3
14:31:37:WU02:FS00:0xa4:Gromacs cannot continue further.
14:31:37:WU02:FS00:0xa4:Going to send back what have done -- stepsTotalG=250000
14:31:37:WU02:FS00:0xa4:Work fraction=0.0000 steps=250000.
14:31:40:WARNING:WU02:FS00:FahCore returned an unknown error code which probably indicates that it crashed
14:31:40:WARNING:WU02:FS00:FahCore returned: UNKNOWN_ENUM (-1073741819 = 0xc0000005)
14:32:21:WU02:FS00:Starting
14:32:21:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 02 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
14:32:21:WU02:FS00:Started FahCore on PID 6332
14:32:21:WU02:FS00:Core PID:2560
14:32:21:WU02:FS00:FahCore 0xa4 started
14:32:22:WU02:FS00:0xa4:
14:32:22:WU02:FS00:0xa4:*------------------------------*
14:32:22:WU02:FS00:0xa4:Folding@Home Gromacs GB Core
14:32:22:WU02:FS00:0xa4:Version 1.27 (Dec. 15, 2010)
14:32:22:WU02:FS00:0xa4:
14:32:22:WU02:FS00:0xa4:Preparing to commence simulation
14:32:22:WU02:FS00:0xa4:- Ensuring status. Please wait.
14:32:31:WU02:FS00:0xa4:- Looking at optimizations...
14:32:31:WU02:FS00:0xa4:- Working with standard loops on this execution.
14:32:31:WU02:FS00:0xa4:- Previous termination of core was improper.
14:32:31:WU02:FS00:0xa4:- Going to use standard loops.
14:32:31:WU02:FS00:0xa4:- Files status OK
14:32:31:WU02:FS00:0xa4:- Expanded 825827 -> 1401112 (decompressed 169.6 percent)
14:32:31:WU02:FS00:0xa4:Called DecompressByteArray: compressed_data_size=825827 data_size=1401112, decompressed_data_size=1401112 diff=0
14:32:31:WU02:FS00:0xa4:- Digital signature verified
14:32:31:WU02:FS00:0xa4:
14:32:31:WU02:FS00:0xa4:Project: 9034 (Run 594, Clone 0, Gen 287)
14:32:31:WU02:FS00:0xa4:
14:32:31:WU02:FS00:0xa4:Entering M.D.
14:32:37:WU02:FS00:0xa4:Mapping NT from 3 to 3
14:32:37:WU02:FS00:0xa4:Gromacs cannot continue further.
14:32:37:WU02:FS00:0xa4:Going to send back what have done -- stepsTotalG=250000
14:32:37:WU02:FS00:0xa4:Work fraction=0.0000 steps=250000.
14:32:43:WU02:FS00:0xa4:logfile size=0 infoLength=0 edr=0 trr=23
14:32:43:WU02:FS00:0xa4:logfile size: 0 info=0 bed=0 hdr=23
14:32:43:WU02:FS00:0xa4:- Writing 638 bytes of core data to disk...
14:32:43:WARNING:WU02:FS00:FahCore returned an unknown error code which probably indicates that it crashed
14:32:43:WARNING:WU02:FS00:FahCore returned: UNKNOWN_ENUM (-1073741819 = 0xc0000005)
14:33:21:WU02:FS00:Starting
14:33:21:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 02 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
14:33:21:WU02:FS00:Started FahCore on PID 5076
14:33:22:WU02:FS00:Core PID:4212
14:33:22:WU02:FS00:FahCore 0xa4 started
14:33:22:WU02:FS00:0xa4:
14:33:22:WU02:FS00:0xa4:*------------------------------*
14:33:22:WU02:FS00:0xa4:Folding@Home Gromacs GB Core
14:33:22:WU02:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
14:33:22:WU02:FS00:0xa4:
14:33:22:WU02:FS00:0xa4:Preparing to commence simulation
14:33:22:WU02:FS00:0xa4:- Ensuring status. Please wait.
14:33:31:WU02:FS00:0xa4:- Looking at optimizations...
14:33:31:WU02:FS00:0xa4:- Working with standard loops on this execution.
14:33:31:WU02:FS00:0xa4:- Previous termination of core was improper.
14:33:31:WU02:FS00:0xa4:- Going to use standard loops.
14:33:31:WU02:FS00:0xa4:- Files status OK
14:33:31:WU02:FS00:0xa4:- Expanded 825827 -> 1401112 (decompressed 169.6 percent)
14:33:31:WU02:FS00:0xa4:Called DecompressByteArray: compressed_data_size=825827 data_size=1401112, decompressed_data_size=1401112 diff=0
14:33:31:WU02:FS00:0xa4:- Digital signature verified
14:33:31:WU02:FS00:0xa4:
14:33:31:WU02:FS00:0xa4:Project: 9034 (Run 594, Clone 0, Gen 287)
14:33:31:WU02:FS00:0xa4:
14:33:31:WU02:FS00:0xa4:Entering M.D.
14:33:37:WU02:FS00:0xa4:Mapping NT from 3 to 3
14:33:53:WARNING:WU02:FS00:FahCore returned an unknown error code which probably indicates that it crashed
14:33:53:WARNING:WU02:FS00:FahCore returned: UNKNOWN_ENUM (-1073741783 = 0xc0000029)
14:33:53:WARNING:WU02:FS00:Too many errors, failing
14:33:53:WU02:FS00:Sending unit results: id:02 state:SEND error:FAILED project:9034 run:594 clone:0 gen:287 core:0xa4 unit:0x0000013cab436c9e56982fa138645449
14:33:53:WU02:FS00:Connecting to 171.67.108.158:8080
14:33:53:WU00:FS00:Connecting to 171.67.108.45:8080
14:33:56:WU02:FS00:Server responded WORK_ACK (400)
14:33:56:WU02:FS00:Cleaning up
14:33:57:WU00:FS00:Assigned to work server 155.247.166.219
14:33:57:WU00:FS00:Requesting new work unit for slot 00: READY cpu:3 from 155.247.166.219
14:33:57:WU00:FS00:Connecting to 155.247.166.219:8080
14:33:59:WU00:FS00:Downloading 116.46KiB
14:34:03:WU00:FS00:Download complete
14:34:03:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:6392 run:80 clone:30 gen:106 core:0xa4 unit:0x000000860002894b545b9f4d5b90cee1
14:34:03:WU00:FS00:Starting
14:34:03:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
14:34:03:WU00:FS00:Started FahCore on PID 6268
14:34:03:WU00:FS00:Core PID:4600
14:34:03:WU00:FS00:FahCore 0xa4 started
14:34:03:WU00:FS00:0xa4:
14:34:03:WU00:FS00:0xa4:*------------------------------*
14:34:03:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
14:34:03:WU00:FS00:0xa4:Version 2. (Dec. 15, 2010)
14:34:03:WU00:FS00:0xa4:
14:34:03:WU00:FS00:0xa4:Preparing to commence simulation
14:34:03:WU00:FS00:0xa4:- Looking at optimizations...
14:34:03:WU00:FS00:0xa4:- Created dyn
14:34:03:WU00:FS00:0xa4:- Files status OK
14:34:03:WU00:FS00:0xa4:- Expanded 118744 -> 269896 (decompressed 227.2 percent)
14:34:03:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=118744 data_size=269896, decompressed_data_size=269896 diff=0
14:34:03:WU00:FS00:0xa4:- Digital signature verified
14:34:03:WU00:FS00:0xa4:
14:34:03:WU00:FS00:0xa4:Project: 6392 (Run 80, Clone 30, Gen 106)
14:34:03:WU00:FS00:0xa4:
14:34:03:WU00:FS00:0xa4:Assembly optimizations on if available.
14:34:03:WU00:FS00:0xa4:Entering M.D.
14:34:09:WU00:FS00:0xa4:Mapping NT from 3 to 3
14:34:09:WU00:FS00:0xa4:Gromacs cannot continue further.
14:34:09:WU00:FS00:0xa4:Going to send back what have done -- stepsTotalG=5000000
14:34:09:WU00:FS00:0xa4:Work fraction=0.0000 steps=5000000.
14:34:13:WU00:FS00:0xa4:logfile size=0 infoLength=0 edr=0 trr=23
14:34:13:WU00:FS00:0xa4:logfile size: 0 info=0 bed=0 hdr=23
14:34:13:WU00:FS00:0xa4:- Writing 639 bytes of core data to disk...
14:34:14:WARNING:WU00:FS00:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
14:34:14:WU00:FS00:Sending unit results: id:00 state:SEND error:FAULTY project:6392 run:80 clone:30 gen:106 core:0xa4 unit:0x000000860002894b545b9f4d5b90cee1
14:34:14:WU00:FS00:Uploading 658B to 155.247.166.219
14:34:14:WU00:FS00:Connecting to 155.247.166.219:8080
14:34:14:WU02:FS00:Connecting to 171.67.108.45:8080
14:34:15:WU00:FS00:Upload complete
14:34:15:WU00:FS00:Server responded WORK_ACK (400)
14:34:15:WU00:FS00:Cleaning up
14:34:15:WU02:FS00:Assigned to work server 155.247.166.219
14:34:15:WU02:FS00:Requesting new work unit for slot 00: READY cpu:3 from 155.247.166.219
14:34:15:WU02:FS00:Connecting to 155.247.166.219:8080
14:34:17:WU02:FS00:Downloading 116.61KiB
14:34:19:WU02:FS00:Download complete
14:34:19:WU02:FS00:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:6394 run:69 clone:31 gen:92 core:0xa4 unit:0x0000006c0002894b5462c64b7b87dfd2
14:34:19:WU02:FS00:Starting
14:34:19:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Val/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 02 -suffix 01 -version 704 -lifeline 4548 -checkpoint 15 -np 3
14:34:20:WU02:FS00:Started FahCore on PID 2552
14:34:20:WU02:FS00:Core PID:4164
14:34:20:WU02:FS00:FahCore 0xa4 started
14:34:20:WU02:FS00:0xa4:
14:34:20:WU02:FS00:0xa4:*------------------------------*
14:34:20:WU02:FS00:0xa4:Folding@Home Gromacs GB Core
14:34:20:WU02:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
14:34:20:WU02:FS00:0xa4:
14:34:20:WU02:FS00:0xa4:Preparing to commence simulation
14:34:20:WU02:FS00:0xa4:- Looking at optimizations...
14:34:20:WU02:FS00:0xa4:- Created dyn
14:34:20:WU02:FS00:0xa4:- Files status OK
14:34:20:WU02:FS00:0xa4:- Expanded 118898 -> 270156 (decompressed 227.2 percent)
14:34:20:WU02:FS00:0xa4:Called DecompressByteArray: compressed_data_size=118898 data_size=270156, decompressed_data_size=270156 diff=0
14:34:20:WU02:FS00:0xa4:- Digital signature verified
14:34:20:WU02:FS00:0xa4:
14:34:20:WU02:FS00:0xa4:Project: 6394 (Run 69, Clone 31, Gen 92)
14:34:20:WU02:FS00:0xa4:
14:34:20:WU02:FS00:0xa4:Assembly optimizations on if available.
14:34:20:WU02:FS00:0xa4:Entering M.D.
14:34:23:WU00:FS00:Connecting to 171.67.108.45:8080
14:34:25:WU00:FS00:Assigned to work server 171.67.108.158
14:34:25:WU00:FS00:Requesting new work unit for slot 00: RUNNING cpu:3 from 171.67.108.158
14:34:25:WU00:FS00:Connecting to 171.67.108.158:8080
14:34:26:WU02:FS00:0xa4:Mapping NT from 3 to 3
14:34:26:WU02:FS00:0xa4:mdrun returned 255
14:34:26:WU02:FS00:0xa4:Going to send back what have done -- stepsTotalG=5000000
14:34:26:WU02:FS00:0xa4:Work fraction=0.0000 steps=5000000.
14:34:30:WU02:FS00:0xa4:logfile size=0 infoLength=0 edr=0 trr=25
14:34:30:WU02:FS00:0xa4:logfile size: 0 info=0 bed=0 hdr=25
14:34:30:WU02:FS00:0xa4:- Writing 641 bytes of core data to disk...
14:34:30:WU02:FS00:0xa4:Done: 129 -> 144 (compressed to 111.6 percent)
14:34:30:WU02:FS00:0xa4: ... Done.
14:34:30:WU02:FS00:0xa4:
14:34:30:WU02:FS00:0xa4:Folding@home Core Shutdown: EARLY_UNIT_END
14:34:30:WU00:FS00:Downloading 807.21KiB
14:34:37:WU00:FS00:Download 31.71%
14:34:38:ERROR:Exception: Failed to acquire lock, timeout was 0
14:34:43:WU00:FS00:Download 71.36%
14:34:45:WU00:FS00:Download complete
14:34:45:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:9035 run:634 clone:1 gen:280 core:0xa4 unit:0x00000130ab436c9e56982e02e777d7fa
14:48:18:WU01:FS01:0x21:Completed 430000 out of 1000000 steps (43%)
******************************* Date: 2016-06-17 *******************************
15:09:13:WU01:FS01:0x21:Completed 440000 out of 1000000 steps (44%)
15:30:08:WU01:FS01:0x21:Completed 450000 out of 1000000 steps (45%)
15:52:44:WU01:FS01:0x21:Completed 460000 out of 1000000 steps (46%)
16:13:39:WU01:FS01:0x21:Completed 470000 out of 1000000 steps (47%)
16:34:34:WU01:FS01:0x21:Completed 480000 out of 1000000 steps (48%)
16:55:29:WU01:FS01:0x21:Completed 490000 out of 1000000 steps (49%)
17:16:25:WU01:FS01:0x21:Completed 500000 out of 1000000 steps (50%)
17:39:18:WU01:FS01:0x21:Completed 510000 out of 1000000 steps (51%)
Re: F@H Client issues
Posted: Fri Jun 17, 2016 6:24 pm
by bruce
In an ideal world, a person can believe that they can do enough benchmarking to create a stable overclock.
In an ideal world, the drivers monitor heat, voltage, etc.. and maximize fan speed, clock rate, etc. to maximize performance without human intervention. (This applies to either a CPU slot or a GPU slot but when talking about heat, there's also the question about who manages the case fan for the sum of the two.)
In both cases, it's not an ideal world.
If you want to fix the symptoms you describe, I'd assume it's most likely heat or power related and start with additional cooling. If you're happy folding at Medium, that's fine, too.
Re: F@H Client issues
Posted: Fri Jun 17, 2016 8:57 pm
by Nathan_P
1st Thing I'd do is clean out the heatsink on the graphics card, take the card out, remove all the excess dust and then blow through the heatsink a few times. After that I'd say power - what PSU do you have in that rig
Re: F@H Client issues
Posted: Mon Jun 20, 2016 3:40 am
by v-raze
bruce wrote:If you want to fix the symptoms you describe, I'd assume it's most likely heat or power related and start with additional cooling. If you're happy folding at Medium, that's fine, too.
Nathan_P wrote:1st Thing I'd do is clean out the heatsink on the graphics card, take the card out, remove all the excess dust and then blow through the heatsink a few times. After that I'd say power - what PSU do you have in that rig
Alright- I doubt it's got to do with thermals as I've delidded and repasted the GPU die (Fermi GPUs have an IHS), and set the fan at the maximum 70% while folding (Zotac has this upper limit hardware locked, not even NiBiTor could save it) and I get stable load temps of 78ºC while folding on full, well below the card's max of 100º.
I don't think that it's the power either- I've got a relatively new 500W unit from EVGA, don't recall exact model, but their PSUs are pretty good and I shouldn't be anywhere near 500W of draw even without my undervolt enabled.
Regardless, I did plan on water cooling this card to make it quieter, better overclocking, completely remove the IHS, and simply because I can- but I doubt this will solve my folding issues.
And I still have these issues without any overclocking or overvolting whatsoever.
I did find a workaround that seems to be allowing me to limp along- I set the BIOS to use the onboard Radeon HD 4200 graphics as display and have F@H still folding on the 560Ti. This has so far allowed me to fold on full all weekend while I was away without the client or control crashing, but the integrated graphics don't display at my monitor's native 1600x900 and are generally a pain to work with, not to mention that if I actually wanted to game I'd have to switch it all back. Any other ideas on how I can increase stability to combat the crashing I'm having?