Folding Forum

Posted: **Mon Jul 27, 2015 9:58 am**

******************************* Date: 2015-07-25 *******************************
12:25:32:WU02:FS01:0x18:WARNING:Console control signal 1 on PID 6580
12:25:32:WU01:FS02:0x18:WARNING:Console control signal 1 on PID 5904
12:25:32:WU02:FS01:0x18:ERROR:103: Lost client lifeline
******************************* Date: 2015-07-25 *******************************
******************************* Date: 2015-07-25 *******************************
******************************* Date: 2015-07-26 *******************************
03:24:37:WU02:FS01:0x18:WARNING:Console control signal 1 on PID 6344
03:24:37:WU00:FS02:0x18:WARNING:Console control signal 1 on PID 6628
03:24:37:WU02:FS01:0x18:ERROR:103: Lost client lifeline
******************************* Date: 2015-07-26 *******************************
11:54:09:WU02:FS01:0x18:WARNING:Console control signal 1 on PID 8020
11:54:09:WU00:FS02:0x18:WARNING:Console control signal 1 on PID 7332
******************************* Date: 2015-07-26 *******************************
******************************* Date: 2015-07-26 *******************************
******************************* Date: 2015-07-27 *******************************
******************************* Date: 2015-07-27 *******************************

The cpu slot folds just fine and the gpu0 slot as well. The trouble is the other gpu slot.

What I see in the advanced control:

fahjuly by SingCP, on Flickr

Any suggestions?

Posted: **Mon Jul 27, 2015 10:50 am**

Rebooting the machine apparently resolved the problem.

Did the WU get returned?

Posted: **Mon Jul 27, 2015 11:04 am**

There were/are some problems with that work server that started yesterday and I experienced a similar situation. Basically, pausing all the slots and restarting the client should get you going again but I did an extra step of trying to send before starting the client again and that did work well. Opening a terminal (CMD) in the data directory and typing (might be FAHClient.exe if using Windows)

Code: Select all

FAHClient --send

did send the one that was trying to upload and after that I removed all client-type flags (e.g. beta ... trying to avoid that server) from my config and started up the client normally (all slots were paused as expected so clicking on the Fold button was necessary) ... all the problems cleared up and all folding resumed normally.

Edit: rebooting usually works well too

but the slots should be paused first if possible to avoid any further problems when the client is abruptly shut down during the reboot ... as to whether or not the upload completed you need to check your log or post it here so we can see what happened.

Posted: **Mon Jul 27, 2015 11:48 am**

I checked the log and it did upload.

Time to close this thread.

Peace?
aoeu

Folding Forum

Is it a server issue or a WU issue?

Is it a server issue or a WU issue?

Re: Is it a server issue or a WU issue?

Re: Is it a server issue or a WU issue?

Re: Is it a server issue or a WU issue?