Page 1 of 1

WU 8825 Run 0 Clone 5 Gen 354 server responded WORK_QUIT

Posted: Mon Jan 26, 2015 9:27 pm
by donkom
When finishing the upload of this WU, I received this message:

20:13:06:WU03:FS01:0xa3:Folding@home Core Shutdown: FINISHED_UNIT
20:13:06:WU03:FS01:FahCore returned: FINISHED_UNIT (100 = 0x64)
20:13:06:WU03:FS01:Sending unit results: id:03 state:SEND error:NO_ERROR project:8825 run:0 clone:5 gen:354 core:0xa3 unit:0x0000023afbcb017c51a4cfc9805944a0
20:13:06:WU03:FS01:Uploading 7.15MiB to 128.143.199.96
20:13:06:WU03:FS01:Connecting to 128.143.199.96:8080
20:13:09:WU03:FS01:Upload complete
20:13:09:WU03:FS01:Server responded WORK_QUIT (404)
20:13:09:WARNING:WU03:FS01:Server did not like results, dumping
20:13:09:WU03:FS01:Cleaning up


I've had a lot of issues lately with my CPU folding, most of which is directly related to "Empty work server assignment" messages that have left my CPU idle for lengthy periods of time, only occasionally grabbing a new WU. Is there a shortage?

Code: Select all

20:15:22:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
20:15:22:WU01:FS01:Connecting to 171.67.108.204:80
20:15:23:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
20:15:23:ERROR:WU01:FS01:Exception: Could not get an assignment
20:19:36:WU01:FS01:Connecting to 171.67.108.200:8080
20:19:37:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
20:19:37:WU01:FS01:Connecting to 171.67.108.204:80
20:19:37:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
20:19:37:ERROR:WU01:FS01:Exception: Could not get an assignment
******************************* Date: 2015-01-26 *******************************
20:26:27:WU01:FS01:Connecting to 171.67.108.200:8080
20:26:28:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
20:26:28:WU01:FS01:Connecting to 171.67.108.204:80
20:26:28:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
20:26:28:ERROR:WU01:FS01:Exception: Could not get an assignment
20:37:34:WU01:FS01:Connecting to 171.67.108.200:8080
20:37:39:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
20:37:39:WU01:FS01:Connecting to 171.67.108.204:80
20:37:40:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
20:37:40:ERROR:WU01:FS01:Exception: Could not get an assignment
20:55:29:WU01:FS01:Connecting to 171.67.108.200:8080
20:55:30:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
20:55:30:WU01:FS01:Connecting to 171.67.108.204:80
20:55:30:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
20:55:30:ERROR:WU01:FS01:Exception: Could not get an assignment

Re: WU 8825 Run 0 Clone 5 Gen 354 server responded WORK_QUIT

Posted: Mon Jan 26, 2015 9:41 pm
by Joe_H
There have been ongoing shortages of WU's for systems configured with a single CPU core for folding going back about a year. If that is how your system is configured, you may do better with the NaCl folding client for Chrome. The WU's for processing with that client are small for processing on less powerful systems, and usually in good supply.

If your system is not configured for a single CPU, please post more of your log and include the beginning section that shows client information, system info and your folding configuration.

So far there is no record in the database yet for this WU that was rejected.

Re: WU 8825 Run 0 Clone 5 Gen 354 server responded WORK_QUIT

Posted: Mon Jan 26, 2015 9:44 pm
by bruce
The WORK QUIT message sometimes comes from a WU which has already been credited to your stats, but that's not true here.

It also can indicate that the results were corrupt. Please post the entire log segment from start-to-finish of that WU. Were there any error messages?

The "Empty work server assignment" message means that none of the active FAH servers had any work that fits the constraints of your system (combining hardware, software, and user-imposed restrictions). My first guess is that changing the number of CPUs dedicated to FAH might help. Posting the first couple of pages of the log might give us the opportunity to suggest ways to broaden the types of WUs you can accept. [It may also be issued if key servers are down or out-of-work, but that's generally a temporary condition.]

Re: WU 8825 Run 0 Clone 5 Gen 354 server responded WORK_QUIT

Posted: Mon Jan 26, 2015 10:10 pm
by donkom
Thanks for the feedback guys.

Here's the system info. This is a 24-core / 48 thread system configured with 32 CPUs in the FAH client. I prefer not to run the NACL client on this machine because there is a performance loss on those WUs with this many threads, divided up so much it's less efficient then on a system with fewer CPUs:

Code: Select all

21:22:33:<config>
21:22:33:  <!-- HTTP Server -->
21:22:33:  <allow v='127.0.0.1, 192.168.1.0/24'/>
21:22:33:  <deny v=''/>
21:22:33:
21:22:33:  <!-- Logging -->
21:22:33:  <verbosity v='5'/>
21:22:33:
21:22:33:  <!-- Network -->
21:22:33:  <proxy v=':8080'/>
21:22:33:
21:22:33:  <!-- Remote Command Server -->
21:22:33:  <command-allow-no-pass v='127.0.0.1, 192.168.1.0/24'/>
21:22:33:  <command-deny-no-pass v=''/>
21:22:33:  <command-port v='36331'/>
21:22:33:  <password v='********'/>
21:22:33:
21:22:33:  <!-- Slot Control -->
21:22:33:  <pause-on-battery v='false'/>
21:22:33:  <power v='full'/>
21:22:33:
21:22:33:  <!-- User Information -->
21:22:33:  <passkey v='********************************'/>
21:22:33:  <team v='34931'/>
21:22:33:  <user v='Don_Komarechka'/>
21:22:33:
21:22:33:  <!-- Folding Slots -->
21:22:33:  <slot id='0' type='GPU'>
21:22:33:    <client-type v='advanced'/>
21:22:33:    <paused v='true'/>
21:22:33:  </slot>
21:22:33:  <slot id='1' type='CPU'>
21:22:33:    <cpus v='32'/>
21:22:33:    <max-packet-size v='big'/>
21:22:33:  </slot>
21:22:33:</config>
Here is the entire WU in question, that generated the WORK_QUIT result. There is some overlap from a GPU unit near the beginning of this log segment:

Code: Select all

15:01:56:WU03:FS01:Connecting to 171.67.108.200:8080
15:01:56:WU03:FS01:Assigned to work server 128.143.199.96
15:01:56:WU03:FS01:Requesting new work unit for slot 01: READY cpu:32 from 128.143.199.96
15:01:56:WU03:FS01:Connecting to 128.143.199.96:8080
15:01:58:WU03:FS01:Downloading 3.63MiB
15:02:00:WU03:FS01:Download complete
15:02:00:WU03:FS01:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:8825 run:0 clone:5 gen:354 core:0xa3 unit:0x0000023afbcb017c51a4cfc9805944a0
15:02:00:WU03:FS01:Starting
15:02:00:WU03:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Don Komarechka/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 03 -suffix 01 -version 704 -lifeline 5080 -checkpoint 15 -np 32
15:02:00:WU03:FS01:Started FahCore on PID 14096
15:02:00:Started thread 105 on PID 5080
15:02:00:WU03:FS01:Core PID:9000
15:02:00:WU03:FS01:FahCore 0xa3 started
15:02:00:WU03:FS01:0xa3:
15:02:00:WU03:FS01:0xa3:*------------------------------*
15:02:00:WU03:FS01:0xa3:Folding@Home Gromacs SMP Core
15:02:00:WU03:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
15:02:00:WU03:FS01:0xa3:
15:02:00:WU03:FS01:0xa3:Preparing to commence simulation
15:02:00:WU03:FS01:0xa3:- Looking at optimizations...
15:02:00:WU03:FS01:0xa3:- Created dyn
15:02:00:WU03:FS01:0xa3:- Files status OK
15:02:00:WU03:FS01:0xa3:- Expanded 3802275 -> 4166092 (decompressed 109.5 percent)
15:02:00:WU03:FS01:0xa3:Called DecompressByteArray: compressed_data_size=3802275 data_size=4166092, decompressed_data_size=4166092 diff=0
15:02:00:WU03:FS01:0xa3:- Digital signature verified
15:02:00:WU03:FS01:0xa3:
15:02:00:WU03:FS01:0xa3:Project: 8825 (Run 0, Clone 5, Gen 354)
15:02:00:WU03:FS01:0xa3:
15:02:00:WU03:FS01:0xa3:Assembly optimizations on if available.
15:02:00:WU03:FS01:0xa3:Entering M.D.
15:02:06:WU03:FS01:0xa3:Mapping NT from 32 to 32 
15:02:13:WU03:FS01:0xa3:Completed 0 out of 500000 steps  (0%)
15:03:29:WU01:FS00:0x17:Completed 4600000 out of 5000000 steps (92%)
15:09:21:WU01:FS00:0x17:Completed 4650000 out of 5000000 steps (93%)
15:14:52:WU01:FS00:0x17:Completed 4700000 out of 5000000 steps (94%)
15:20:23:WU01:FS00:0x17:Completed 4750000 out of 5000000 steps (95%)
15:26:16:WU01:FS00:0x17:Completed 4800000 out of 5000000 steps (96%)
15:31:48:WU01:FS00:0x17:Completed 4850000 out of 5000000 steps (97%)
15:37:40:WU01:FS00:0x17:Completed 4900000 out of 5000000 steps (98%)
15:43:11:WU01:FS00:0x17:Completed 4950000 out of 5000000 steps (99%)
15:48:38:WU03:FS01:0xa3:Completed 5000 out of 500000 steps  (1%)
15:48:42:WU01:FS00:0x17:Completed 5000000 out of 5000000 steps (100%)
15:48:58:WU01:FS00:0x17:Saving result file logfile_01.txt
15:48:58:WU01:FS00:0x17:Saving result file checkpointState.xml
15:49:00:WU01:FS00:0x17:Saving result file checkpt.crc
15:49:00:WU01:FS00:0x17:Saving result file log.txt
15:49:01:WU01:FS00:0x17:Saving result file positions.xtc
15:49:03:WU01:FS00:0x17:Folding@home Core Shutdown: FINISHED_UNIT
15:49:03:WU01:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
15:49:04:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:13000 run:935 clone:0 gen:89 core:0x17 unit:0x000000b3538b3db75310a39c0d7b428d
15:49:04:WU01:FS00:Uploading 12.83MiB to 140.163.4.231
15:49:04:WU01:FS00:Connecting to 140.163.4.231:8080
15:49:10:WU01:FS00:Upload 89.14%
15:49:20:WU01:FS00:Upload complete
15:49:21:WU01:FS00:Server responded WORK_ACK (400)
15:49:21:WU01:FS00:Final credit estimate, 85956.00 points
15:49:21:WU01:FS00:Cleaning up
15:51:19:WU03:FS01:0xa3:Completed 10000 out of 500000 steps  (2%)
15:53:57:WU03:FS01:0xa3:Completed 15000 out of 500000 steps  (3%)
15:56:37:WU03:FS01:0xa3:Completed 20000 out of 500000 steps  (4%)
15:59:15:WU03:FS01:0xa3:Completed 25000 out of 500000 steps  (5%)
16:01:55:WU03:FS01:0xa3:Completed 30000 out of 500000 steps  (6%)
16:04:33:WU03:FS01:0xa3:Completed 35000 out of 500000 steps  (7%)
16:07:13:WU03:FS01:0xa3:Completed 40000 out of 500000 steps  (8%)
16:09:56:WU03:FS01:0xa3:Completed 45000 out of 500000 steps  (9%)
16:12:39:WU03:FS01:0xa3:Completed 50000 out of 500000 steps  (10%)
16:15:20:WU03:FS01:0xa3:Completed 55000 out of 500000 steps  (11%)
16:18:02:WU03:FS01:0xa3:Completed 60000 out of 500000 steps  (12%)
16:20:41:WU03:FS01:0xa3:Completed 65000 out of 500000 steps  (13%)
16:23:20:WU03:FS01:0xa3:Completed 70000 out of 500000 steps  (14%)
16:25:58:WU03:FS01:0xa3:Completed 75000 out of 500000 steps  (15%)
16:28:35:WU03:FS01:0xa3:Completed 80000 out of 500000 steps  (16%)
16:31:12:WU03:FS01:0xa3:Completed 85000 out of 500000 steps  (17%)
16:33:51:WU03:FS01:0xa3:Completed 90000 out of 500000 steps  (18%)
16:36:29:WU03:FS01:0xa3:Completed 95000 out of 500000 steps  (19%)
16:39:07:WU03:FS01:0xa3:Completed 100000 out of 500000 steps  (20%)
16:41:46:WU03:FS01:0xa3:Completed 105000 out of 500000 steps  (21%)
16:44:23:WU03:FS01:0xa3:Completed 110000 out of 500000 steps  (22%)
16:47:01:WU03:FS01:0xa3:Completed 115000 out of 500000 steps  (23%)
16:49:39:WU03:FS01:0xa3:Completed 120000 out of 500000 steps  (24%)
16:52:17:WU03:FS01:0xa3:Completed 125000 out of 500000 steps  (25%)
16:54:55:WU03:FS01:0xa3:Completed 130000 out of 500000 steps  (26%)
16:57:34:WU03:FS01:0xa3:Completed 135000 out of 500000 steps  (27%)
17:00:14:WU03:FS01:0xa3:Completed 140000 out of 500000 steps  (28%)
17:02:53:WU03:FS01:0xa3:Completed 145000 out of 500000 steps  (29%)
17:05:30:WU03:FS01:0xa3:Completed 150000 out of 500000 steps  (30%)
17:08:07:WU03:FS01:0xa3:Completed 155000 out of 500000 steps  (31%)
17:10:45:WU03:FS01:0xa3:Completed 160000 out of 500000 steps  (32%)
17:13:22:WU03:FS01:0xa3:Completed 165000 out of 500000 steps  (33%)
17:16:00:WU03:FS01:0xa3:Completed 170000 out of 500000 steps  (34%)
17:18:38:WU03:FS01:0xa3:Completed 175000 out of 500000 steps  (35%)
17:21:17:WU03:FS01:0xa3:Completed 180000 out of 500000 steps  (36%)
17:23:53:WU03:FS01:0xa3:Completed 185000 out of 500000 steps  (37%)
17:26:33:WU03:FS01:0xa3:Completed 190000 out of 500000 steps  (38%)
17:29:11:WU03:FS01:0xa3:Completed 195000 out of 500000 steps  (39%)
17:31:51:WU03:FS01:0xa3:Completed 200000 out of 500000 steps  (40%)
17:34:33:WU03:FS01:0xa3:Completed 205000 out of 500000 steps  (41%)
17:37:17:WU03:FS01:0xa3:Completed 210000 out of 500000 steps  (42%)
17:39:56:WU03:FS01:0xa3:Completed 215000 out of 500000 steps  (43%)
17:42:34:WU03:FS01:0xa3:Completed 220000 out of 500000 steps  (44%)
17:45:11:WU03:FS01:0xa3:Completed 225000 out of 500000 steps  (45%)
17:47:50:WU03:FS01:0xa3:Completed 230000 out of 500000 steps  (46%)
17:50:27:WU03:FS01:0xa3:Completed 235000 out of 500000 steps  (47%)
17:53:05:WU03:FS01:0xa3:Completed 240000 out of 500000 steps  (48%)
17:55:43:WU03:FS01:0xa3:Completed 245000 out of 500000 steps  (49%)
17:58:20:WU03:FS01:0xa3:Completed 250000 out of 500000 steps  (50%)
18:00:58:WU03:FS01:0xa3:Completed 255000 out of 500000 steps  (51%)
18:03:35:WU03:FS01:0xa3:Completed 260000 out of 500000 steps  (52%)
18:06:16:WU03:FS01:0xa3:Completed 265000 out of 500000 steps  (53%)
18:08:53:WU03:FS01:0xa3:Completed 270000 out of 500000 steps  (54%)
18:11:30:WU03:FS01:0xa3:Completed 275000 out of 500000 steps  (55%)
18:14:08:WU03:FS01:0xa3:Completed 280000 out of 500000 steps  (56%)
18:16:47:WU03:FS01:0xa3:Completed 285000 out of 500000 steps  (57%)
18:19:26:WU03:FS01:0xa3:Completed 290000 out of 500000 steps  (58%)
18:22:06:WU03:FS01:0xa3:Completed 295000 out of 500000 steps  (59%)
18:24:46:WU03:FS01:0xa3:Completed 300000 out of 500000 steps  (60%)
18:27:25:WU03:FS01:0xa3:Completed 305000 out of 500000 steps  (61%)
18:30:03:WU03:FS01:0xa3:Completed 310000 out of 500000 steps  (62%)
18:32:43:WU03:FS01:0xa3:Completed 315000 out of 500000 steps  (63%)
18:35:21:WU03:FS01:0xa3:Completed 320000 out of 500000 steps  (64%)
18:37:59:WU03:FS01:0xa3:Completed 325000 out of 500000 steps  (65%)
18:40:38:WU03:FS01:0xa3:Completed 330000 out of 500000 steps  (66%)
18:43:16:WU03:FS01:0xa3:Completed 335000 out of 500000 steps  (67%)
18:45:54:WU03:FS01:0xa3:Completed 340000 out of 500000 steps  (68%)
18:48:32:WU03:FS01:0xa3:Completed 345000 out of 500000 steps  (69%)
18:51:12:WU03:FS01:0xa3:Completed 350000 out of 500000 steps  (70%)
18:53:51:WU03:FS01:0xa3:Completed 355000 out of 500000 steps  (71%)
18:56:30:WU03:FS01:0xa3:Completed 360000 out of 500000 steps  (72%)
18:59:08:WU03:FS01:0xa3:Completed 365000 out of 500000 steps  (73%)
19:01:48:WU03:FS01:0xa3:Completed 370000 out of 500000 steps  (74%)
19:04:30:WU03:FS01:0xa3:Completed 375000 out of 500000 steps  (75%)
19:07:11:WU03:FS01:0xa3:Completed 380000 out of 500000 steps  (76%)
19:09:49:WU03:FS01:0xa3:Completed 385000 out of 500000 steps  (77%)
19:12:27:WU03:FS01:0xa3:Completed 390000 out of 500000 steps  (78%)
19:15:05:WU03:FS01:0xa3:Completed 395000 out of 500000 steps  (79%)
19:17:44:WU03:FS01:0xa3:Completed 400000 out of 500000 steps  (80%)
19:20:24:WU03:FS01:0xa3:Completed 405000 out of 500000 steps  (81%)
19:23:05:WU03:FS01:0xa3:Completed 410000 out of 500000 steps  (82%)
19:25:55:WU03:FS01:0xa3:Completed 415000 out of 500000 steps  (83%)
19:28:46:WU03:FS01:0xa3:Completed 420000 out of 500000 steps  (84%)
19:31:35:WU03:FS01:0xa3:Completed 425000 out of 500000 steps  (85%)
19:34:25:WU03:FS01:0xa3:Completed 430000 out of 500000 steps  (86%)
19:37:13:WU03:FS01:0xa3:Completed 435000 out of 500000 steps  (87%)
19:40:01:WU03:FS01:0xa3:Completed 440000 out of 500000 steps  (88%)
19:42:46:WU03:FS01:0xa3:Completed 445000 out of 500000 steps  (89%)
19:45:29:WU03:FS01:0xa3:Completed 450000 out of 500000 steps  (90%)
19:48:15:WU03:FS01:0xa3:Completed 455000 out of 500000 steps  (91%)
19:51:01:WU03:FS01:0xa3:Completed 460000 out of 500000 steps  (92%)
19:53:47:WU03:FS01:0xa3:Completed 465000 out of 500000 steps  (93%)
19:56:30:WU03:FS01:0xa3:Completed 470000 out of 500000 steps  (94%)
19:59:07:WU03:FS01:0xa3:Completed 475000 out of 500000 steps  (95%)
20:01:45:WU03:FS01:0xa3:Completed 480000 out of 500000 steps  (96%)
20:04:30:WU03:FS01:0xa3:Completed 485000 out of 500000 steps  (97%)
20:07:13:WU03:FS01:0xa3:Completed 490000 out of 500000 steps  (98%)
20:10:03:WU03:FS01:0xa3:Completed 495000 out of 500000 steps  (99%)
20:10:05:WU01:FS01:Connecting to 171.67.108.200:8080
20:10:06:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
20:10:06:WU01:FS01:Connecting to 171.67.108.204:80
20:10:07:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
20:10:07:ERROR:WU01:FS01:Exception: Could not get an assignment
20:10:07:WU01:FS01:Connecting to 171.67.108.200:8080
20:10:08:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
20:10:08:WU01:FS01:Connecting to 171.67.108.204:80
20:10:08:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
20:10:08:ERROR:WU01:FS01:Exception: Could not get an assignment
20:11:07:WU01:FS01:Connecting to 171.67.108.200:8080
20:11:08:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
20:11:08:WU01:FS01:Connecting to 171.67.108.204:80
20:11:08:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
20:11:08:ERROR:WU01:FS01:Exception: Could not get an assignment
20:12:45:WU01:FS01:Connecting to 171.67.108.200:8080
20:12:45:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
20:12:45:WU01:FS01:Connecting to 171.67.108.204:80
20:12:46:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
20:12:46:ERROR:WU01:FS01:Exception: Could not get an assignment
20:12:51:WU03:FS01:0xa3:Completed 500000 out of 500000 steps  (100%)
20:12:53:WU03:FS01:0xa3:DynamicWrapper: Finished Work Unit: sleep=10000
20:13:03:WU03:FS01:0xa3:
20:13:03:WU03:FS01:0xa3:Finished Work Unit:
20:13:03:WU03:FS01:0xa3:- Reading up to 8031072 from "03/wudata_01.trr": Read 8031072
20:13:03:WU03:FS01:0xa3:trr file hash check passed.
20:13:03:WU03:FS01:0xa3:edr file hash check passed.
20:13:03:WU03:FS01:0xa3:logfile size: 58474
20:13:03:WU03:FS01:0xa3:Leaving Run
20:13:03:WU03:FS01:0xa3:- Writing 8126378 bytes of core data to disk...
20:13:05:WU03:FS01:0xa3:Done: 8125866 -> 7501871 (compressed to 92.3 percent)
20:13:05:WU03:FS01:0xa3:  ... Done.
20:13:06:WU03:FS01:0xa3:- Shutting down core
20:13:06:WU03:FS01:0xa3:
20:13:06:WU03:FS01:0xa3:Folding@home Core Shutdown: FINISHED_UNIT
20:13:06:WU03:FS01:FahCore returned: FINISHED_UNIT (100 = 0x64)
20:13:06:WU03:FS01:Sending unit results: id:03 state:SEND error:NO_ERROR project:8825 run:0 clone:5 gen:354 core:0xa3 unit:0x0000023afbcb017c51a4cfc9805944a0
20:13:06:WU03:FS01:Uploading 7.15MiB to 128.143.199.96
20:13:06:WU03:FS01:Connecting to 128.143.199.96:8080
20:13:09:WU03:FS01:Upload complete
20:13:09:WU03:FS01:Server responded WORK_QUIT (404)
20:13:09:WARNING:WU03:FS01:Server did not like results, dumping
20:13:09:WU03:FS01:Cleaning up
Hope this helps?

Re: WU 8825 Run 0 Clone 5 Gen 354 server responded WORK_QUIT

Posted: Fri Jan 30, 2015 6:15 pm
by donkom
Here's some further odd behaviour with WUs 8817 and 8821. Could it be linked to the number of cores trying to be used? It just keeps failing and then the server refuses to send new WUs.

Code: Select all

18:01:52:<config>
18:01:52:  <!-- HTTP Server -->
18:01:52:  <allow v='127.0.0.1, 192.168.1.0/24'/>
18:01:52:  <deny v=''/>
18:01:52:
18:01:52:  <!-- Logging -->
18:01:52:  <verbosity v='5'/>
18:01:52:
18:01:52:  <!-- Network -->
18:01:52:  <proxy v=':8080'/>
18:01:52:
18:01:52:  <!-- Remote Command Server -->
18:01:52:  <command-allow-no-pass v='127.0.0.1, 192.168.1.0/24'/>
18:01:52:  <command-deny-no-pass v=''/>
18:01:52:  <command-port v='36331'/>
18:01:52:  <password v='********'/>
18:01:52:
18:01:52:  <!-- Slot Control -->
18:01:52:  <pause-on-battery v='false'/>
18:01:52:  <power v='full'/>
18:01:52:
18:01:52:  <!-- User Information -->
18:01:52:  <passkey v='********************************'/>
18:01:52:  <team v='34931'/>
18:01:52:  <user v='Don_Komarechka'/>
18:01:52:
18:01:52:  <!-- Folding Slots -->
18:01:52:  <slot id='0' type='GPU'>
18:01:52:    <client-type v='advanced'/>
18:01:52:    <paused v='true'/>
18:01:52:  </slot>
18:01:52:  <slot id='1' type='CPU'>
18:01:52:    <cpus v='32'/>
18:01:52:    <max-packet-size v='big'/>
18:01:52:  </slot>
18:01:52:</config>
18:01:58:WU01:FS01:Starting
18:01:58:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Don Komarechka/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 01 -suffix 01 -version 704 -lifeline 6176 -checkpoint 15 -np 32
18:01:58:WU01:FS01:Started FahCore on PID 18236
18:01:58:Started thread 35 on PID 6176
18:01:58:WU01:FS01:Core PID:5368
18:01:58:WU01:FS01:FahCore 0xa3 started
18:01:59:WU01:FS01:0xa3:
18:01:59:WU01:FS01:0xa3:*------------------------------*
18:01:59:WU01:FS01:0xa3:Folding@Home Gromacs SMP Core
18:01:59:WU01:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
18:01:59:WU01:FS01:0xa3:
18:01:59:WU01:FS01:0xa3:Preparing to commence simulation
18:01:59:WU01:FS01:0xa3:- Ensuring status. Please wait.
18:02:08:WU01:FS01:0xa3:- Looking at optimizations...
18:02:08:WU01:FS01:0xa3:- Working with standard loops on this execution.
18:02:08:WU01:FS01:0xa3:- Previous termination of core was improper.
18:02:08:WU01:FS01:0xa3:- Going to use standard loops.
18:02:08:WU01:FS01:0xa3:- Files status OK
18:02:08:WU01:FS01:0xa3:- Expanded 1053 -> 8192 (decompressed 777.9 percent)
18:02:08:WU01:FS01:0xa3:Called DecompressByteArray: compressed_data_size=1053 data_size=8192, decompressed_data_size=8192 diff=0
18:02:08:WU01:FS01:0xa3:- Digital signature verified
18:02:08:WU01:FS01:0xa3:
18:02:08:WU01:FS01:0xa3:Project: 8817 (Run 0, Clone 1, Gen 378)
18:02:08:WU01:FS01:0xa3:
18:02:08:WU01:FS01:0xa3:Entering M.D.
18:02:14:WU01:FS01:0xa3:Mapping NT from 32 to 32 
18:02:15:WARNING:WU01:FS01:FahCore returned an unknown error code which probably indicates that it crashed
18:02:15:WARNING:WU01:FS01:FahCore returned: UNKNOWN_ENUM (-1073740777 = 0xc0000417)
18:02:58:WU01:FS01:Starting
18:02:58:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Don Komarechka/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 01 -suffix 01 -version 704 -lifeline 6176 -checkpoint 15 -np 32
18:02:58:WU01:FS01:Started FahCore on PID 17204
18:02:58:Started thread 36 on PID 6176
18:02:58:WU01:FS01:Core PID:14752
18:02:58:WU01:FS01:FahCore 0xa3 started
18:02:59:WU01:FS01:0xa3:
18:02:59:WU01:FS01:0xa3:*------------------------------*
18:02:59:WU01:FS01:0xa3:Folding@Home Gromacs SMP Core
18:02:59:WU01:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
18:02:59:WU01:FS01:0xa3:
18:02:59:WU01:FS01:0xa3:Preparing to commence simulation
18:02:59:WU01:FS01:0xa3:- Ensuring status. Please wait.
18:03:08:WU01:FS01:0xa3:- Looking at optimizations...
18:03:08:WU01:FS01:0xa3:- Working with standard loops on this execution.
18:03:08:WU01:FS01:0xa3:- Previous termination of core was improper.
18:03:08:WU01:FS01:0xa3:- Going to use standard loops.
18:03:08:WU01:FS01:0xa3:- Files status OK
18:03:08:WU01:FS01:0xa3:- Expanded 1053 -> 8192 (decompressed 777.9 percent)
18:03:08:WU01:FS01:0xa3:Called DecompressByteArray: compressed_data_size=1053 data_size=8192, decompressed_data_size=8192 diff=0
18:03:08:WU01:FS01:0xa3:- Digital signature verified
18:03:08:WU01:FS01:0xa3:
18:03:08:WU01:FS01:0xa3:Project: 8817 (Run 0, Clone 1, Gen 378)
18:03:08:WU01:FS01:0xa3:
18:03:08:WU01:FS01:0xa3:Entering M.D.
18:03:14:WU01:FS01:0xa3:Mapping NT from 32 to 32 
18:03:15:WARNING:WU01:FS01:FahCore returned an unknown error code which probably indicates that it crashed
18:03:15:WARNING:WU01:FS01:FahCore returned: UNKNOWN_ENUM (-1073740777 = 0xc0000417)
18:03:58:WU01:FS01:Starting
18:03:58:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Don Komarechka/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 01 -suffix 01 -version 704 -lifeline 6176 -checkpoint 15 -np 32
18:03:58:WU01:FS01:Started FahCore on PID 10752
18:03:58:Started thread 37 on PID 6176
18:03:58:WU01:FS01:Core PID:13160
18:03:58:WU01:FS01:FahCore 0xa3 started
18:03:59:WU01:FS01:0xa3:
18:03:59:WU01:FS01:0xa3:*------------------------------*
18:03:59:WU01:FS01:0xa3:Folding@Home Gromacs SMP Core
18:03:59:WU01:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
18:03:59:WU01:FS01:0xa3:
18:03:59:WU01:FS01:0xa3:Preparing to commence simulation
18:03:59:WU01:FS01:0xa3:- Ensuring status. Please wait.
18:04:08:WU01:FS01:0xa3:- Looking at optimizations...
18:04:08:WU01:FS01:0xa3:- Working with standard loops on this execution.
18:04:08:WU01:FS01:0xa3:- Previous termination of core was improper.
18:04:08:WU01:FS01:0xa3:- Going to use standard loops.
18:04:08:WU01:FS01:0xa3:- Files status OK
18:04:08:WU01:FS01:0xa3:- Expanded 1053 -> 8192 (decompressed 777.9 percent)
18:04:08:WU01:FS01:0xa3:Called DecompressByteArray: compressed_data_size=1053 data_size=8192, decompressed_data_size=8192 diff=0
18:04:08:WU01:FS01:0xa3:- Digital signature verified
18:04:08:WU01:FS01:0xa3:
18:04:08:WU01:FS01:0xa3:Project: 8817 (Run 0, Clone 1, Gen 378)
18:04:08:WU01:FS01:0xa3:
18:04:08:WU01:FS01:0xa3:Entering M.D.
18:04:14:WU01:FS01:0xa3:Mapping NT from 32 to 32 
18:04:15:WARNING:WU01:FS01:FahCore returned an unknown error code which probably indicates that it crashed
18:04:15:WARNING:WU01:FS01:FahCore returned: UNKNOWN_ENUM (-1073740777 = 0xc0000417)
18:04:15:WARNING:WU01:FS01:Too many errors, failing
18:04:15:WU01:FS01:Sending unit results: id:01 state:SEND error:FAILED project:8817 run:0 clone:1 gen:378 core:0xa3 unit:0x00000275fbcb017c5193d6720c08845c
18:04:15:WU01:FS01:Connecting to 128.143.199.96:8080
18:04:16:WU00:FS01:Connecting to 171.67.108.200:8080
18:04:17:WU01:FS01:Server responded WORK_QUIT (404)
18:04:17:WARNING:WU01:FS01:Server did not like results, dumping
18:04:17:WU01:FS01:Cleaning up
18:04:17:WU00:FS01:Assigned to work server 128.143.199.96
18:04:17:WU00:FS01:Requesting new work unit for slot 01: READY cpu:32 from 128.143.199.96
18:04:17:WU00:FS01:Connecting to 128.143.199.96:8080
18:04:18:WU00:FS01:Downloading 1.45KiB
18:04:18:WU00:FS01:Download complete
18:04:19:WU00:FS01:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:8821 run:0 clone:9 gen:440 core:0xa3 unit:0x00000279fbcb017c51a4cc7ccc117810
18:04:19:WU00:FS01:Starting
18:04:19:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Don Komarechka/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 00 -suffix 01 -version 704 -lifeline 6176 -checkpoint 15 -np 32
18:04:19:WU00:FS01:Started FahCore on PID 17584
18:04:19:Started thread 38 on PID 6176
18:04:19:WU00:FS01:Core PID:17540
18:04:19:WU00:FS01:FahCore 0xa3 started
18:04:19:WU00:FS01:0xa3:
18:04:19:WU00:FS01:0xa3:*------------------------------*
18:04:19:WU00:FS01:0xa3:Folding@Home Gromacs SMP Core
18:04:19:WU00:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
18:04:19:WU00:FS01:0xa3:
18:04:19:WU00:FS01:0xa3:Preparing to commence simulation
18:04:19:WU00:FS01:0xa3:- Looking at optimizations...
18:04:19:WU00:FS01:0xa3:- Created dyn
18:04:19:WU00:FS01:0xa3:- Files status OK
18:04:19:WU00:FS01:0xa3:- Expanded 975 -> 8192 (decompressed 840.2 percent)
18:04:19:WU00:FS01:0xa3:Called DecompressByteArray: compressed_data_size=975 data_size=8192, decompressed_data_size=8192 diff=0
18:04:19:WU00:FS01:0xa3:- Digital signature verified
18:04:19:WU00:FS01:0xa3:
18:04:19:WU00:FS01:0xa3:Project: 8821 (Run 0, Clone 9, Gen 440)
18:04:19:WU00:FS01:0xa3:
18:04:19:WU00:FS01:0xa3:Assembly optimizations on if available.
18:04:19:WU00:FS01:0xa3:Entering M.D.
18:04:25:WU00:FS01:0xa3:Mapping NT from 32 to 32 
18:04:26:WARNING:WU00:FS01:FahCore returned an unknown error code which probably indicates that it crashed
18:04:26:WARNING:WU00:FS01:FahCore returned: UNKNOWN_ENUM (-1073740777 = 0xc0000417)
18:04:26:WU00:FS01:Starting
18:04:26:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Don Komarechka/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 00 -suffix 01 -version 704 -lifeline 6176 -checkpoint 15 -np 32
18:04:26:WU00:FS01:Started FahCore on PID 16400
18:04:26:Started thread 39 on PID 6176
18:04:26:WU00:FS01:Core PID:17428
18:04:26:WU00:FS01:FahCore 0xa3 started
18:04:26:WU00:FS01:0xa3:
18:04:26:WU00:FS01:0xa3:*------------------------------*
18:04:26:WU00:FS01:0xa3:Folding@Home Gromacs SMP Core
18:04:26:WU00:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
18:04:26:WU00:FS01:0xa3:
18:04:26:WU00:FS01:0xa3:Preparing to commence simulation
18:04:26:WU00:FS01:0xa3:- Ensuring status. Please wait.
18:04:36:WU00:FS01:0xa3:- Looking at optimizations...
18:04:36:WU00:FS01:0xa3:- Working with standard loops on this execution.
18:04:36:WU00:FS01:0xa3:- Previous termination of core was improper.
18:04:36:WU00:FS01:0xa3:- Files status OK
18:04:36:WU00:FS01:0xa3:- Expanded 975 -> 8192 (decompressed 840.2 percent)
18:04:36:WU00:FS01:0xa3:Called DecompressByteArray: compressed_data_size=975 data_size=8192, decompressed_data_size=8192 diff=0
18:04:36:WU00:FS01:0xa3:- Digital signature verified
18:04:36:WU00:FS01:0xa3:
18:04:36:WU00:FS01:0xa3:Project: 8821 (Run 0, Clone 9, Gen 440)
18:04:36:WU00:FS01:0xa3:
18:04:36:WU00:FS01:0xa3:Entering M.D.
18:04:42:WU00:FS01:0xa3:Mapping NT from 32 to 32 
18:04:42:WARNING:WU00:FS01:FahCore returned an unknown error code which probably indicates that it crashed
18:04:42:WARNING:WU00:FS01:FahCore returned: UNKNOWN_ENUM (-1073740777 = 0xc0000417)
18:05:26:WU00:FS01:Starting
18:05:26:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Don Komarechka/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 00 -suffix 01 -version 704 -lifeline 6176 -checkpoint 15 -np 32
18:05:26:WU00:FS01:Started FahCore on PID 13540
18:05:26:Started thread 40 on PID 6176
18:05:26:WU00:FS01:Core PID:14444
18:05:26:WU00:FS01:FahCore 0xa3 started
18:05:27:WU00:FS01:0xa3:
18:05:27:WU00:FS01:0xa3:*------------------------------*
18:05:27:WU00:FS01:0xa3:Folding@Home Gromacs SMP Core
18:05:27:WU00:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
18:05:27:WU00:FS01:0xa3:
18:05:27:WU00:FS01:0xa3:Preparing to commence simulation
18:05:27:WU00:FS01:0xa3:- Ensuring status. Please wait.
18:05:36:WU00:FS01:0xa3:- Looking at optimizations...
18:05:36:WU00:FS01:0xa3:- Working with standard loops on this execution.
18:05:36:WU00:FS01:0xa3:- Previous termination of core was improper.
18:05:36:WU00:FS01:0xa3:- Going to use standard loops.
18:05:36:WU00:FS01:0xa3:- Files status OK
18:05:36:WU00:FS01:0xa3:- Expanded 975 -> 8192 (decompressed 840.2 percent)
18:05:36:WU00:FS01:0xa3:Called DecompressByteArray: compressed_data_size=975 data_size=8192, decompressed_data_size=8192 diff=0
18:05:36:WU00:FS01:0xa3:- Digital signature verified
18:05:36:WU00:FS01:0xa3:
18:05:36:WU00:FS01:0xa3:Project: 8821 (Run 0, Clone 9, Gen 440)
18:05:36:WU00:FS01:0xa3:
18:05:36:WU00:FS01:0xa3:Entering M.D.
18:05:42:WU00:FS01:0xa3:Mapping NT from 32 to 32 
18:05:43:WARNING:WU00:FS01:FahCore returned an unknown error code which probably indicates that it crashed
18:05:43:WARNING:WU00:FS01:FahCore returned: UNKNOWN_ENUM (-1073740777 = 0xc0000417)
18:06:26:WU00:FS01:Starting
18:06:26:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Don Komarechka/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 00 -suffix 01 -version 704 -lifeline 6176 -checkpoint 15 -np 32
18:06:26:WU00:FS01:Started FahCore on PID 9480
18:06:26:Started thread 41 on PID 6176
18:06:26:WU00:FS01:Core PID:16440
18:06:26:WU00:FS01:FahCore 0xa3 started
18:06:27:WU00:FS01:0xa3:
18:06:27:WU00:FS01:0xa3:*------------------------------*
18:06:27:WU00:FS01:0xa3:Folding@Home Gromacs SMP Core
18:06:27:WU00:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
18:06:27:WU00:FS01:0xa3:
18:06:27:WU00:FS01:0xa3:Preparing to commence simulation
18:06:27:WU00:FS01:0xa3:- Ensuring status. Please wait.
18:06:36:WU00:FS01:0xa3:- Looking at optimizations...
18:06:36:WU00:FS01:0xa3:- Working with standard loops on this execution.
18:06:36:WU00:FS01:0xa3:- Previous termination of core was improper.
18:06:36:WU00:FS01:0xa3:- Going to use standard loops.
18:06:36:WU00:FS01:0xa3:- Files status OK
18:06:36:WU00:FS01:0xa3:- Expanded 975 -> 8192 (decompressed 840.2 percent)
18:06:36:WU00:FS01:0xa3:Called DecompressByteArray: compressed_data_size=975 data_size=8192, decompressed_data_size=8192 diff=0
18:06:36:WU00:FS01:0xa3:- Digital signature verified
18:06:36:WU00:FS01:0xa3:
18:06:36:WU00:FS01:0xa3:Project: 8821 (Run 0, Clone 9, Gen 440)
18:06:36:WU00:FS01:0xa3:
18:06:36:WU00:FS01:0xa3:Entering M.D.
18:06:42:WU00:FS01:0xa3:Mapping NT from 32 to 32 
18:06:43:WARNING:WU00:FS01:FahCore returned an unknown error code which probably indicates that it crashed
18:06:43:WARNING:WU00:FS01:FahCore returned: UNKNOWN_ENUM (-1073740777 = 0xc0000417)
18:07:26:WU00:FS01:Starting
18:07:26:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Don Komarechka/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a3.fah/FahCore_a3.exe" -dir 00 -suffix 01 -version 704 -lifeline 6176 -checkpoint 15 -np 32
18:07:26:WU00:FS01:Started FahCore on PID 18160
18:07:26:Started thread 42 on PID 6176
18:07:26:WU00:FS01:Core PID:14688
18:07:26:WU00:FS01:FahCore 0xa3 started
18:07:27:WU00:FS01:0xa3:
18:07:27:WU00:FS01:0xa3:*------------------------------*
18:07:27:WU00:FS01:0xa3:Folding@Home Gromacs SMP Core
18:07:27:WU00:FS01:0xa3:Version 2.27 (Dec. 15, 2010)
18:07:27:WU00:FS01:0xa3:
18:07:27:WU00:FS01:0xa3:Preparing to commence simulation
18:07:27:WU00:FS01:0xa3:- Ensuring status. Please wait.
18:07:36:WU00:FS01:0xa3:- Looking at optimizations...
18:07:36:WU00:FS01:0xa3:- Working with standard loops on this execution.
18:07:36:WU00:FS01:0xa3:- Previous termination of core was improper.
18:07:36:WU00:FS01:0xa3:- Going to use standard loops.
18:07:36:WU00:FS01:0xa3:- Files status OK
18:07:36:WU00:FS01:0xa3:- Expanded 975 -> 8192 (decompressed 840.2 percent)
18:07:36:WU00:FS01:0xa3:Called DecompressByteArray: compressed_data_size=975 data_size=8192, decompressed_data_size=8192 diff=0
18:07:36:WU00:FS01:0xa3:- Digital signature verified
18:07:36:WU00:FS01:0xa3:
18:07:36:WU00:FS01:0xa3:Project: 8821 (Run 0, Clone 9, Gen 440)
18:07:36:WU00:FS01:0xa3:
18:07:36:WU00:FS01:0xa3:Entering M.D.
18:07:42:WU00:FS01:0xa3:Mapping NT from 32 to 32 
18:07:43:WARNING:WU00:FS01:FahCore returned an unknown error code which probably indicates that it crashed
18:07:43:WARNING:WU00:FS01:FahCore returned: UNKNOWN_ENUM (-1073740777 = 0xc0000417)
18:07:43:WARNING:WU00:FS01:Too many errors, failing
18:07:43:WU00:FS01:Sending unit results: id:00 state:SEND error:FAILED project:8821 run:0 clone:9 gen:440 core:0xa3 unit:0x00000279fbcb017c51a4cc7ccc117810
18:07:43:WU00:FS01:Connecting to 128.143.199.96:8080
18:07:43:WU00:FS01:Server responded WORK_QUIT (404)
18:07:43:WARNING:WU00:FS01:Server did not like results, dumping
18:07:43:WU00:FS01:Cleaning up
18:07:43:WU01:FS01:Connecting to 171.67.108.200:8080
18:07:44:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
18:07:44:WU01:FS01:Connecting to 171.67.108.204:80
18:07:44:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
18:07:44:ERROR:WU01:FS01:Exception: Could not get an assignment
18:07:45:WU01:FS01:Connecting to 171.67.108.200:8080
18:07:45:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
18:07:45:WU01:FS01:Connecting to 171.67.108.204:80
18:07:46:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
18:07:46:ERROR:WU01:FS01:Exception: Could not get an assignment
18:08:45:WU01:FS01:Connecting to 171.67.108.200:8080
18:08:45:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
18:08:45:WU01:FS01:Connecting to 171.67.108.204:80
18:08:46:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
18:08:46:ERROR:WU01:FS01:Exception: Could not get an assignment
18:10:22:WU01:FS01:Connecting to 171.67.108.200:8080
18:10:22:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
18:10:22:WU01:FS01:Connecting to 171.67.108.204:80
18:10:23:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
18:10:23:ERROR:WU01:FS01:Exception: Could not get an assignment
18:12:59:WU01:FS01:Connecting to 171.67.108.200:8080
18:13:00:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.200:8080': Empty work server assignment
18:13:00:WU01:FS01:Connecting to 171.67.108.204:80
18:13:00:WARNING:WU01:FS01:Failed to get assignment from '171.67.108.204:80': Empty work server assignment
18:13:00:ERROR:WU01:FS01:Exception: Could not get an assignment