Folding Forum

Community driven support forum for Folding@home
https://foldingforum.org/

171.67.108.58 Upload problem, Project 8055 and others

https://foldingforum.org/viewtopic.php?t=22928

Page 1 of 1

171.67.108.58 Upload problem, Project 8055 and others

Posted: Fri Nov 09, 2012 5:26 am
by ApexMotorsports
Looking for help on my second workstation failing to upload to WS and CS.

The log data below is from project:8055 run:955 clone:6 gen:31. However there are about 6 projects in cue that are failing to upload to other IP's. I am guessing it's due to port addresses. I am using the same address (default setup addresses) for my other workstation (WS1) and that workstation is uploading things in 4 seconds to the WS.

Code: Select all

21:14:00:WU04:FS00:0xa4:DynamicWrapper: Finished Work Unit: sleep=10000
21:14:10:WU04:FS00:0xa4:
21:14:10:WU04:FS00:0xa4:Finished Work Unit:
21:14:10:WU04:FS00:0xa4:- Reading up to 877704 from "04/wudata_01.trr": Read 877704
21:14:10:WU04:FS00:0xa4:trr file hash check passed.
21:14:10:WU04:FS00:0xa4:- Reading up to 959152 from "04/wudata_01.xtc": Read 959152
21:14:10:WU04:FS00:0xa4:xtc file hash check passed.
21:14:10:WU04:FS00:0xa4:edr file hash check passed.
21:14:10:WU04:FS00:0xa4:logfile size: 28130
21:14:10:WU04:FS00:0xa4:Leaving Run
21:14:11:WU04:FS00:0xa4:- Writing 1873958 bytes of core data to disk...
21:14:12:WU04:FS00:0xa4:Done: 1873446 -> 1803982 (compressed to 96.2 percent)
21:14:12:WU04:FS00:0xa4:  ... Done.
21:14:13:WU04:FS00:0xa4:- Shutting down core
21:14:13:WU04:FS00:0xa4:
21:14:13:WU04:FS00:0xa4:Folding@home Core Shutdown: FINISHED_UNIT
21:14:13:WU04:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
21:14:13:WU04:FS00:Sending unit results: id:04 state:SEND error:NO_ERROR project:8055 run:955 clone:6 gen:31 core:0xa4 unit:0x000000276652edca506d0128e9902ea6
21:14:13:WU04:FS00:Uploading 1.72MiB to 171.67.108.58
21:14:13:WU04:FS00:Connecting to 171.67.108.58:8080
21:14:13:WU05:FS00:Starting
21:14:34:WARNING:WU04:FS00:WorkServer connection failed on port 8080 trying 80
21:14:34:WU04:FS00:Connecting to 171.67.108.58:80
21:14:56:WARNING:WU04:FS00:Exception: Failed to send results to work server: Failed to connect to 171.67.108.58:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
21:14:56:WU04:FS00:Trying to send results to collection server
21:14:56:WU04:FS00:Uploading 1.72MiB to 171.65.103.160
21:14:56:WU04:FS00:Connecting to 171.65.103.160:8080
21:15:51:WU04:FS00:Upload 3.63%
21:15:51:ERROR:WU04:FS00:Exception: Transfer failed
21:15:51:WU04:FS00:Sending unit results: id:04 state:SEND error:NO_ERROR project:8055 run:955 clone:6 gen:31 core:0xa4 unit:0x000000276652edca506d0128e9902ea6
21:15:51:WU04:FS00:Uploading 1.72MiB to 171.67.108.58
21:15:51:WU04:FS00:Connecting to 171.67.108.58:8080
21:16:12:WARNING:WU04:FS00:WorkServer connection failed on port 8080 trying 80
21:16:12:WU04:FS00:Connecting to 171.67.108.58:80
21:16:33:WARNING:WU04:FS00:Exception: Failed to send results to work server: Failed to connect to 171.67.108.58:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
21:16:33:WU04:FS00:Trying to send results to collection server
21:16:33:WU04:FS00:Uploading 1.72MiB to 171.65.103.160
21:16:33:WU04:FS00:Connecting to 171.65.103.160:8080
21:16:53:WU04:FS00:Upload 3.63%
21:16:53:ERROR:WU04:FS00:Exception: Transfer failed
21:16:53:WU04:FS00:Sending unit results: id:04 state:SEND error:NO_ERROR project:8055 run:955 clone:6 gen:31 core:0xa4 unit:0x000000276652edca506d0128e9902ea6
21:16:53:WU04:FS00:Uploading 1.72MiB to 171.67.108.58
21:16:53:WU04:FS00:Connecting to 171.67.108.58:8080
21:17:14:WARNING:WU04:FS00:WorkServer connection failed on port 8080 trying 80
21:17:14:WU04:FS00:Connecting to 171.67.108.58:80
21:17:35:WARNING:WU04:FS00:Exception: Failed to send results to work server: Failed to connect to 171.67.108.58:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
21:17:35:WU04:FS00:Trying to send results to collection server
21:17:35:WU04:FS00:Uploading 1.72MiB to 171.65.103.160
21:17:35:WU04:FS00:Connecting to 171.65.103.160:8080
21:19:23:WU04:FS00:Upload 3.63%
21:20:53:WU04:FS00:Upload 7.26%
21:27:32:WU04:FS00:Upload 10.90%
21:27:32:ERROR:WU04:FS00:Exception: Transfer failed
21:27:32:WU04:FS00:Sending unit results: id:04 state:SEND error:NO_ERROR project:8055 run:955 clone:6 gen:31 core:0xa4 unit:0x000000276652edca506d0128e9902ea6
21:27:33:WU04:FS00:Uploading 1.72MiB to 171.67.108.58
21:27:33:WU04:FS00:Connecting to 171.67.108.58:8080
21:27:54:WARNING:WU04:FS00:WorkServer connection failed on port 8080 trying 80
21:27:54:WU04:FS00:Connecting to 171.67.108.58:80
21:28:15:WARNING:WU04:FS00:Exception: Failed to send results to work server: Failed to connect to 171.67.108.58:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
21:28:15:WU04:FS00:Trying to send results to collection server
21:28:15:WU04:FS00:Uploading 1.72MiB to 171.65.103.160
21:28:15:WU04:FS00:Connecting to 171.65.103.160:8080
21:30:23:WU04:FS00:Upload 3.63%
Mod edit: added Code tags

Re: 171.67.108.58 Upload problem, Project 8055 and others

Posted: Fri Nov 09, 2012 6:57 am
by bruce
Are you able to open http://171.67.108.58:8080 and http://171.67.108.58 in your browser? Ordinarily that should give you a blank page (not an error message).

The logs that you posted shows that the upload actually starts but it's proceeding rather slowly. Is your internet connection particularly slow or unreliable? Is FAH competing with some other application that's making heavy use of your internet connection?

Re: 171.67.108.58 Upload problem, Project 8055 and others

Posted: Fri Nov 09, 2012 8:04 am
by ApexMotorsports
No page errors when I open those IP's in the browser, just blank page as it should be. My connection speed is 25 Megabit high speed cable and I don't have any issues with it. I use the same line with uploading on workstation 1 (shared network) and it uploads even the huge projects in less than 4 seconds. I can usually play battlefield 3 and similar high load games for hours without issue, seamless web surfing and file transfer outside FAH. Example: another project just uploaded in seconds from my other computer connected to the WAN with the same cable on WS1. WS2 hasn't completed a single upload to Stanford servers all day. I also set the program priority to high for FAH. So it has to be somewhere other than the connection reliability and other tasks. Do you need to set up different client addresses if your running multiple machines on the same router?

More ideas would be great.

Re: 171.67.108.58 Upload problem, Project 8055 and others

Posted: Fri Nov 09, 2012 8:10 am
by ApexMotorsports
// edit. Connection info Ping 5ms, Download speed 34.13Mbps, Up 3.9Mbps on WS2 speed test just now.

Re: 171.67.108.58 Upload problem, Project 8055 and others

Posted: Fri Nov 09, 2012 10:26 am
by bollix47
Welcome to the folding support forum ApexMotorsports.

Please post the System Info and the Configuration sections of the log for the failing client.

If you're unsure how to do that see: viewtopic.php?p=225958#p225958

It might be helpful to post the same information for the client that is working as well.
All times are UTC
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited