Page 1 of 2
Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 8:53 am
by truder44
Project: 7163 (Run 0, Clone 67, Gen 180)
Code: Select all
[quote][11:56:30] - Expanded 1773226 -> 1963664 (decompressed 110.7 percent)
[11:56:30] Called DecompressByteArray: compressed_data_size=1773226 data_size=1963664, decompressed_data_size=1963664 diff=0
[11:56:30] - Digital signature verified
[11:56:30]
[11:56:30] Project: 7163 (Run 0, Clone 67, Gen 180)
[11:56:30]
[11:56:30] Assembly optimizations on if available.
[11:56:30] Entering M.D.
[11:56:36] Mapping NT from 4 to 4
[11:56:36] Completed 0 out of 500000 steps (0%)
[12:01:21] Completed 5000 out of 500000 steps (1%)
[12:06:05] Completed 10000 out of 500000 steps (2%)
[12:10:49] Completed 15000 out of 500000 steps (3%)
[12:15:33] Completed 20000 out of 500000 steps (4%)
[12:20:18] Completed 25000 out of 500000 steps (5%)
[12:25:02] Completed 30000 out of 500000 steps (6%)
[12:29:45] Completed 35000 out of 500000 steps (7%)
[12:34:30] Completed 40000 out of 500000 steps (8%)
[12:39:14] Completed 45000 out of 500000 steps (9%)
[12:43:59] Completed 50000 out of 500000 steps (10%)
[12:48:44] Completed 55000 out of 500000 steps (11%)
[12:53:29] Completed 60000 out of 500000 steps (12%)
[12:58:14] Completed 65000 out of 500000 steps (13%)
[13:02:58] Completed 70000 out of 500000 steps (14%)
[13:07:43] Completed 75000 out of 500000 steps (15%)
[13:12:30] Completed 80000 out of 500000 steps (16%)
[13:17:16] Completed 85000 out of 500000 steps (17%)
[13:22:01] Completed 90000 out of 500000 steps (18%)
[13:26:47] Completed 95000 out of 500000 steps (19%)
[13:31:32] Completed 100000 out of 500000 steps (20%)
[13:36:17] Completed 105000 out of 500000 steps (21%)
[13:41:02] Completed 110000 out of 500000 steps (22%)
[13:45:50] Completed 115000 out of 500000 steps (23%)
[13:50:35] Completed 120000 out of 500000 steps (24%)
[13:55:18] Completed 125000 out of 500000 steps (25%)
[14:00:01] Completed 130000 out of 500000 steps (26%)
[14:04:27] - Autosending finished units... [August 25 14:04:27 UTC]
[14:04:27] Trying to send all finished work units
[14:04:27] + No unsent completed units remaining.
[14:04:27] - Autosend completed
[14:04:44] Completed 135000 out of 500000 steps (27%)
[14:09:28] Completed 140000 out of 500000 steps (28%)
[14:14:12] Completed 145000 out of 500000 steps (29%)
[14:18:58] Completed 150000 out of 500000 steps (30%)
[14:23:44] Completed 155000 out of 500000 steps (31%)
[14:28:29] Completed 160000 out of 500000 steps (32%)
[14:33:13] Completed 165000 out of 500000 steps (33%)
[14:37:59] Completed 170000 out of 500000 steps (34%)
[14:42:44] Completed 175000 out of 500000 steps (35%)
[14:47:28] Completed 180000 out of 500000 steps (36%)
[14:52:12] Completed 185000 out of 500000 steps (37%)
[14:56:56] Completed 190000 out of 500000 steps (38%)
[15:02:57] Completed 195000 out of 500000 steps (39%)
[15:07:40] Completed 200000 out of 500000 steps (40%)
[15:12:23] Completed 205000 out of 500000 steps (41%)
[15:17:07] Completed 210000 out of 500000 steps (42%)
[15:21:50] Completed 215000 out of 500000 steps (43%)
[15:26:34] Completed 220000 out of 500000 steps (44%)
[15:31:18] Completed 225000 out of 500000 steps (45%)
[15:36:02] Completed 230000 out of 500000 steps (46%)
[15:40:44] Completed 235000 out of 500000 steps (47%)
[15:45:26] Completed 240000 out of 500000 steps (48%)
[15:50:08] Completed 245000 out of 500000 steps (49%)
[15:54:48] Completed 250000 out of 500000 steps (50%)
[15:59:30] Completed 255000 out of 500000 steps (51%)
[16:04:13] Completed 260000 out of 500000 steps (52%)
[16:08:55] Completed 265000 out of 500000 steps (53%)
[16:13:38] Completed 270000 out of 500000 steps (54%)
[16:18:19] Completed 275000 out of 500000 steps (55%)
[16:23:01] Completed 280000 out of 500000 steps (56%)
[16:27:44] Completed 285000 out of 500000 steps (57%)
[16:32:25] Completed 290000 out of 500000 steps (58%)
[16:37:07] Completed 295000 out of 500000 steps (59%)
[16:41:49] Completed 300000 out of 500000 steps (60%)
[16:46:31] Completed 305000 out of 500000 steps (61%)
[16:51:14] Completed 310000 out of 500000 steps (62%)
[16:55:56] Completed 315000 out of 500000 steps (63%)
[17:00:38] Completed 320000 out of 500000 steps (64%)
[17:05:21] Completed 325000 out of 500000 steps (65%)
[17:10:03] Completed 330000 out of 500000 steps (66%)
[17:14:46] Completed 335000 out of 500000 steps (67%)
[17:19:29] Completed 340000 out of 500000 steps (68%)
[17:24:12] Completed 345000 out of 500000 steps (69%)
[17:28:54] Completed 350000 out of 500000 steps (70%)
[17:33:36] Completed 355000 out of 500000 steps (71%)
[17:38:17] Completed 360000 out of 500000 steps (72%)
[17:42:57] Completed 365000 out of 500000 steps (73%)
[17:47:37] Completed 370000 out of 500000 steps (74%)
[17:52:19] Completed 375000 out of 500000 steps (75%)
[17:57:01] Completed 380000 out of 500000 steps (76%)
[18:01:44] Completed 385000 out of 500000 steps (77%)
[18:06:27] Completed 390000 out of 500000 steps (78%)
[18:11:08] Completed 395000 out of 500000 steps (79%)
[18:15:52] Completed 400000 out of 500000 steps (80%)
[18:20:33] Completed 405000 out of 500000 steps (81%)
[18:25:15] Completed 410000 out of 500000 steps (82%)
[18:29:56] Completed 415000 out of 500000 steps (83%)
[18:34:39] Completed 420000 out of 500000 steps (84%)
[18:39:20] Completed 425000 out of 500000 steps (85%)
[18:44:01] Completed 430000 out of 500000 steps (86%)
[18:49:04] Completed 435000 out of 500000 steps (87%)
[18:53:46] Completed 440000 out of 500000 steps (88%)
[18:58:29] Completed 445000 out of 500000 steps (89%)
[19:03:12] Completed 450000 out of 500000 steps (90%)
[19:07:56] Completed 455000 out of 500000 steps (91%)
[19:12:38] Completed 460000 out of 500000 steps (92%)
[19:17:20] Completed 465000 out of 500000 steps (93%)
[19:22:02] Completed 470000 out of 500000 steps (94%)
[19:26:43] Completed 475000 out of 500000 steps (95%)
[19:31:25] Completed 480000 out of 500000 steps (96%)
[19:36:08] Completed 485000 out of 500000 steps (97%)
[19:40:49] Completed 490000 out of 500000 steps (98%)
[19:45:32] Completed 495000 out of 500000 steps (99%)
[19:50:14] Completed 500000 out of 500000 steps (100%)
[19:50:15] DynamicWrapper: Finished Work Unit: sleep=10000
[19:50:25]
[19:50:25] Finished Work Unit:
[19:50:25] - Reading up to 3717600 from "work/wudata_08.trr": Read 3717600
[19:50:25] trr file hash check passed.
[19:50:25] edr file hash check passed.
[19:50:25] logfile size: 59920
[19:50:25] Leaving Run
[19:50:29] - Writing 3813080 bytes of core data to disk...
[19:50:30] Done: 3812568 -> 3533922 (compressed to 92.6 percent)
[19:50:30] ... Done.
[19:50:32] - Shutting down core
[19:50:32]
[19:50:32] Folding@home Core Shutdown: FINISHED_UNIT
[19:50:35] CoreStatus = 64 (100)
[19:50:35] Unit 8 finished with 92 percent of time to deadline remaining.
[19:50:35] Updated performance fraction: 0.957942
[19:50:35] Sending work to server
[19:50:35] Project: 7163 (Run 0, Clone 67, Gen 180)
[19:50:35] + Attempting to send results [August 25 19:50:35 UTC]
[19:50:35] - Reading file work/wuresults_08.dat from core
[19:50:35] (Read 3534434 bytes from disk)
[19:50:35] Connecting to http://128.143.199.96:8080/
[19:51:50] Posted data.
[19:51:50] Initial: 0000; - Uploaded at ~46 kB/s
[19:51:50] - Averaged speed for that direction ~50 kB/s
[19:51:50] + Results successfully sent
[19:51:50] Thank you for your contribution to Folding@Home.
[19:51:50] + Number of Units Completed: 837
[19:51:55] Trying to send all finished work units
[19:51:55] + No unsent completed units remaining.
[19:51:55] - Preparing to get new work unit...
[19:51:55] Cleaning up work directory
[19:51:55] + Attempting to get work packet
[19:51:55] - Will indicate memory of 8174 MB
[19:51:55] - Connecting to assignment server
[19:51:55] Connecting to http://assign.stanford.edu:8080/
[19:51:56] Posted data.
[19:51:56] Initial: 4081; - Successful: assigned to (129.64.95.82).
[19:51:56] + News From Folding@Home: Welcome to Folding@Home
[19:51:56] Loaded queue successfully.
[19:51:56] Empty passkey
[19:51:56] Connecting to http://129.64.95.82:8080/
[19:52:00] Posted data.
[19:52:00] Initial: 0000; - Receiving payload (expected size: 664129)
[19:52:00] Conversation time very short, giving reduced weight in bandwidth avg
[19:52:00] - Downloaded at ~1297 kB/s
[19:52:00] - Averaged speed for that direction ~1131 kB/s
[19:52:00] + Received work.
[19:52:00] Trying to send all finished work units
[19:52:00] + No unsent completed units remaining.
[19:52:00] + Closed connections
[19:52:00]
[19:52:00] + Processing work unit
[19:52:00] A4 will attempt to use 4 threads.
[19:52:00] Core required: FahCore_a4.exe
[19:52:00] Core found.
[19:52:00] Working on queue slot 09 [August 25 19:52:00 UTC][/quote]
WU completed in approx 8 hours and results returned. Preferred deadline of 2.6 days.
Is there a problem somewhere. According to the Bonus point Calculator It should have been nearer 3000 points.
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 10:51 am
by bollix47
It appears you are using two different passkeys and one of them has just completed it's 10th work unit. I can't tell if the computer that ran the P7136 was run on that machine but if it was that would explain the no bonus points situation. You could compare the passkey on that computer with your others in case a digit was entered incorrectly or you could wait for that same computer to complete one more work unit to see if it starts getting the bonus.
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 11:03 am
by bruce
Also, if either the passkey or the UserName was changed after downloading the WU, it will receive no bonus no matter how promptly it was completed. (We can't tell if that happened, but the server knows, and you'd know, too.)
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 11:35 am
by truder44
bollix47 and bruce
The machine that submitted the WU has been folding since November 2011 with no problem and no changes to the passkey or username AND has completed a WU for which bonus was awarded since the WU I am asking about. The other machine has only been folding about 6 days also without problem and has been receiving the bonus OK.
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 11:43 am
by bruce
Just before the portion of the log that you posted, there should be information on the download of that WU. Please show that information, too.
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 12:24 pm
by truder44
Code: Select all
--- Opening Log file [August 24 06:19:47 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.34
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\truder44\Documents\F@H SMP
Executable: C:\Users\truder44\Documents\F@H SMP\FAH6.34-win32-SMP.exe
Arguments: -verbosity 9 -smp -smp -verbosity 9
[06:19:47] - Ask before connecting: No
[06:19:47] - User name: truder44 (Team 3542)
[06:19:47] - User ID: 2F37F8413B88CCFE
[06:19:47] - Machine ID: 2
[06:19:47]
[06:19:47] Loaded queue successfully.
[06:19:47]
[06:19:47] - Autosending finished units... [August 24 06:19:47 UTC]
[06:19:47] + Processing work unit
[06:19:47] Trying to send all finished work units
[06:19:47] A4 will attempt to use 4 threads.
[06:19:47] + No unsent completed units remaining.
[06:19:47] Core required: FahCore_a4.exe
[06:19:47] - Autosend completed
[06:19:47] Core found.
[06:19:47] Working on queue slot 09 [August 24 06:19:47 UTC]
[06:19:47] + Working ...
[06:19:47] - Calling '.\FahCore_a4.exe -dir work/ -nice 19 -suffix 09 -np 4 -checkpoint 15 -verbose -lifeline 1412 -version 634'
[06:19:47]
[06:19:47] *------------------------------*
[06:19:47] Folding@Home Gromacs GB Core
[06:19:47] Version 2.27 (Dec. 15, 2010)
[06:19:47]
[06:19:47] Preparing to commence simulation
[06:19:47] - Ensuring status. Please wait.
[06:19:57] - Looking at optimizations...
[06:19:57] - Working with standard loops on this execution.
[06:19:57] - Previous termination of core was improper.
[06:19:57] - Files status OK
[06:19:57] - Expanded 663967 -> 1297016 (decompressed 195.3 percent)
[06:19:57] Called DecompressByteArray: compressed_data_size=663967 data_size=1297016, decompressed_data_size=1297016 diff=0
[06:19:57] - Digital signature verified
[06:19:57]
[06:19:57] Project: 7200 (Run 18, Clone 10, Gen 394)
[06:19:57]
[06:19:57] Entering M.D.
[06:20:03] Using Gromacs checkpoints
[06:20:03] Mapping NT from 4 to 4
[06:20:03] Resuming from checkpoint
[06:20:03] Verified work/wudata_09.log
[06:20:03] Verified work/wudata_09.trr
[06:20:03] Verified work/wudata_09.xtc
[06:20:03] Verified work/wudata_09.edr
[06:20:03] Completed 608980 out of 750000 steps (81%)
[06:23:39] Completed 615000 out of 750000 steps (82%)
[06:28:12] Completed 622500 out of 750000 steps (83%)
[06:32:37] Completed 630000 out of 750000 steps (84%)
[06:37:04] Completed 637500 out of 750000 steps (85%)
[06:41:28] Completed 645000 out of 750000 steps (86%)
[06:45:55] Completed 652500 out of 750000 steps (87%)
[06:50:20] Completed 660000 out of 750000 steps (88%)
[06:54:55] Completed 667500 out of 750000 steps (89%)
--- Opening Log file [August 24 08:04:27 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.34
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\truder44\Documents\F@H SMP
Executable: C:\Users\truder44\Documents\F@H SMP\FAH6.34-win32-SMP.exe
Arguments: -verbosity 9 -smp -smp -verbosity 9
[08:04:27] - Ask before connecting: No
[08:04:27] - User name: truder44 (Team 3542)
[08:04:27] - User ID: 2F37F8413B88CCFE
[08:04:27] - Machine ID: 2
[08:04:27]
[08:04:27] Loaded queue successfully.
[08:04:27]
[08:04:27] - Autosending finished units... [August 24 08:04:27 UTC]
[08:04:27] + Processing work unit
[08:04:27] Trying to send all finished work units
[08:04:27] A4 will attempt to use 4 threads.
[08:04:27] + No unsent completed units remaining.
[08:04:27] Core required: FahCore_a4.exe
[08:04:27] - Autosend completed
[08:04:27] Core found.
[08:04:27] Working on queue slot 09 [August 24 08:04:27 UTC]
[08:04:27] + Working ...
[08:04:27] - Calling '.\FahCore_a4.exe -dir work/ -nice 19 -suffix 09 -np 4 -checkpoint 15 -verbose -lifeline 4124 -version 634'
[08:04:27]
[08:04:27] *------------------------------*
[08:04:27] Folding@Home Gromacs GB Core
[08:04:27] Version 2.27 (Dec. 15, 2010)
[08:04:27]
[08:04:27] Preparing to commence simulation
[08:04:27] - Ensuring status. Please wait.
[08:04:37] - Looking at optimizations...
[08:04:37] - Working with standard loops on this execution.
[08:04:37] - Previous termination of core was improper.
[08:04:37] - Going to use standard loops.
[08:04:37] - Files status OK
[08:04:37] - Expanded 663967 -> 1297016 (decompressed 195.3 percent)
[08:04:37] Called DecompressByteArray: compressed_data_size=663967 data_size=1297016, decompressed_data_size=1297016 diff=0
[08:04:37] - Digital signature verified
[08:04:37]
[08:04:37] Project: 7200 (Run 18, Clone 10, Gen 394)
[08:04:37]
[08:04:37] Entering M.D.
[08:04:43] Using Gromacs checkpoints
[08:04:43] Mapping NT from 4 to 4
[08:04:43] Resuming from checkpoint
[08:04:43] Verified work/wudata_09.log
[08:04:43] Verified work/wudata_09.trr
[08:04:43] Verified work/wudata_09.xtc
[08:04:43] Verified work/wudata_09.edr
[08:04:43] Completed 659530 out of 750000 steps (87%)
[08:04:59] Completed 660000 out of 750000 steps (88%)
[08:09:13] Completed 667500 out of 750000 steps (89%)
[08:13:27] Completed 675000 out of 750000 steps (90%)
[08:17:40] Completed 682500 out of 750000 steps (91%)
[08:21:55] Completed 690000 out of 750000 steps (92%)
[08:26:29] Completed 697500 out of 750000 steps (93%)
[08:31:14] Completed 705000 out of 750000 steps (94%)
[08:35:57] Completed 712500 out of 750000 steps (95%)
[08:40:05] Completed 720000 out of 750000 steps (96%)
[08:44:14] Completed 727500 out of 750000 steps (97%)
[08:48:24] Completed 735000 out of 750000 steps (98%)
[08:52:37] Completed 742500 out of 750000 steps (99%)
[08:56:47] Completed 750000 out of 750000 steps (100%)
[08:56:48] DynamicWrapper: Finished Work Unit: sleep=10000
[08:56:58]
[08:56:58] Finished Work Unit:
[08:56:58] - Reading up to 1152288 from "work/wudata_09.trr": Read 1152288
[08:56:58] trr file hash check passed.
[08:56:58] - Reading up to 1118272 from "work/wudata_09.xtc": Read 1118272
[08:56:58] xtc file hash check passed.
[08:56:58] edr file hash check passed.
[08:56:58] logfile size: 132878
[08:56:58] Leaving Run
[08:56:58] - Writing 2511942 bytes of core data to disk...
[08:56:59] Done: 2511430 -> 2320733 (compressed to 92.4 percent)
[08:56:59] ... Done.
[08:57:01] - Shutting down core
[08:57:01]
[08:57:01] Folding@home Core Shutdown: FINISHED_UNIT
[08:57:05] CoreStatus = 64 (100)
[08:57:05] Unit 9 finished with 97 percent of time to deadline remaining.
[08:57:05] Updated performance fraction: 0.973798
[08:57:05] Sending work to server
[08:57:05] Project: 7200 (Run 18, Clone 10, Gen 394)
[08:57:05] + Attempting to send results [August 24 08:57:05 UTC]
[08:57:05] - Reading file work/wuresults_09.dat from core
[08:57:05] (Read 2321245 bytes from disk)
[08:57:05] Connecting to http://129.64.95.82:8080/
[08:57:54] Posted data.
[08:57:54] Initial: 0000; - Uploaded at ~46 kB/s
[08:57:54] - Averaged speed for that direction ~46 kB/s
```````````````````````````````````````````````````````````````snip``````````````````````````````````````````````````
[11:54:28] Completed 247500 out of 250000 steps (99%)
[11:55:31] Completed 250000 out of 250000 steps (100%)
[11:55:31] DynamicWrapper: Finished Work Unit: sleep=10000
[11:55:41]
[11:55:41] Finished Work Unit:
[11:55:41] - Reading up to 769164 from "work/wudata_07.trr": Read 769164
[11:55:41] trr file hash check passed.
[11:55:41] - Reading up to 455860 from "work/wudata_07.xtc": Read 455860
[11:55:41] xtc file hash check passed.
[11:55:41] edr file hash check passed.
[11:55:41] logfile size: 22851
[11:55:41] Leaving Run
[11:55:43] - Writing 1253279 bytes of core data to disk...
[11:55:43] Done: 1252767 -> 1192513 (compressed to 95.1 percent)
[11:55:43] ... Done.
[11:55:44] - Shutting down core
[11:55:44]
[11:55:44] Folding@home Core Shutdown: FINISHED_UNIT
[11:55:48] CoreStatus = 64 (100)
[11:55:48] Unit 7 finished with 98 percent of time to deadline remaining.
[11:55:48] Updated performance fraction: 0.966568
[11:55:48] Sending work to server
[11:55:48] Project: 8014 (Run 8, Clone 177, Gen 142)
[11:55:48] + Attempting to send results [August 25 11:55:48 UTC]
[11:55:48] - Reading file work/wuresults_07.dat from core
[11:55:48] (Read 1193025 bytes from disk)
[11:55:48] Connecting to http://171.67.108.58:8080/
[11:55:50] - Couldn't send HTTP request to server
[11:55:50] + Could not connect to Work Server (results)
[11:55:50] (171.67.108.58:8080)
[11:55:50] + Retrying using alternative port
[11:55:50] Connecting to http://171.67.108.58:80/
[11:55:51] - Couldn't send HTTP request to server
[11:55:51] + Could not connect to Work Server (results)
[11:55:51] (171.67.108.58:80)
[11:55:51] - Error: Could not transmit unit 07 (completed August 25) to work server.
[11:55:51] - 1 failed uploads of this unit.
[11:55:51] Keeping unit 07 in queue.
[11:55:51] Trying to send all finished work units
[11:55:51] Project: 8014 (Run 8, Clone 177, Gen 142)
[11:55:51] + Attempting to send results [August 25 11:55:51 UTC]
[11:55:51] - Reading file work/wuresults_07.dat from core
[11:55:51] (Read 1193025 bytes from disk)
[11:55:51] Connecting to http://171.67.108.58:8080/
[11:55:53] - Couldn't send HTTP request to server
[11:55:53] + Could not connect to Work Server (results)
[11:55:53] (171.67.108.58:8080)
[11:55:53] + Retrying using alternative port
[11:55:53] Connecting to http://171.67.108.58:80/
[11:55:55] - Couldn't send HTTP request to server
[11:55:55] + Could not connect to Work Server (results)
[11:55:55] (171.67.108.58:80)
[11:55:55] - Error: Could not transmit unit 07 (completed August 25) to work server.
[11:55:55] - 2 failed uploads of this unit.
[11:55:55] + Attempting to send results [August 25 11:55:55 UTC]
[11:55:55] - Reading file work/wuresults_07.dat from core
[11:55:55] (Read 1193025 bytes from disk)
[11:55:55] Connecting to http://171.65.103.160:8080/
[11:56:15] Posted data.
[11:56:15] Initial: 0000; - Uploaded at ~58 kB/s
[11:56:15] - Averaged speed for that direction ~51 kB/s
[11:56:15] + Results successfully sent
[11:56:15] Thank you for your contribution to Folding@Home.
[11:56:15] + Number of Units Completed: 836
[11:56:15] Successfully sent unit 07 to Collection server.
[11:56:15] + Sent 1 of 1 completed units to the server
[11:56:15] - Preparing to get new work unit...
[11:56:15] Cleaning up work directory
[11:56:15] + Attempting to get work packet
[11:56:15] - Will indicate memory of 8174 MB
[11:56:15] - Connecting to assignment server
[11:56:15] Connecting to http://assign.stanford.edu:8080/
[11:56:16] Posted data.
[11:56:16] Initial: 8F80; - Successful: assigned to (128.143.199.96).
[11:56:16] + News From Folding@Home: Welcome to Folding@Home
[11:56:16] Loaded queue successfully.
[11:56:16] Empty passkey
[11:56:16] Connecting to http://128.143.199.96:8080/
[11:56:27] Posted data.
[11:56:27] Initial: 0000; - Receiving payload (expected size: 1773738)
[11:56:30] - Downloaded at ~577 kB/s
[11:56:30] - Averaged speed for that direction ~1110 kB/s
[11:56:30] + Received work.
[11:56:30] Trying to send all finished work units
[11:56:30] + No unsent completed units remaining.
[11:56:30] + Closed connections
[11:56:30]
[11:56:30] + Processing work unit
[11:56:30] Core required: FahCore_a3.exe
[11:56:30] Core found.
[11:56:30] Working on queue slot 08 [August 25 11:56:30 UTC]
[11:56:30] + Working ...
[11:56:30] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 08 -np 4 -checkpoint 15 -verbose -lifeline 4124 -version 634'
[11:56:30]
[11:56:30] *------------------------------*
[11:56:30] Folding@Home Gromacs SMP Core
[11:56:30] Version 2.27 (Dec. 15, 2010)
[11:56:30]
[11:56:30] Preparing to commence simulation
[11:56:30] - Looking at optimizations...
[11:56:30] - Created dyn
[11:56:30] - Files status OK
[11:56:30] - Expanded 1773226 -> 1963664 (decompressed 110.7 percent)
[11:56:30] Called DecompressByteArray: compressed_data_size=1773226 data_size=1963664, decompressed_data_size=1963664 diff=0
[11:56:30] - Digital signature verified
[11:56:30]
[11:56:30] Project: 7163 (Run 0, Clone 67, Gen 180)
[11:56:30]
[11:56:30] Assembly optimizations on if available.
[11:56:30] Entering M.D.
[11:56:36] Mapping NT from 4 to 4
[11:56:36] Completed 0 out of 500000 steps (0%)
[12:01:21] Completed 5000 out of 500000 steps (1%)
[12:06:05] Completed 10000 out of 500000 steps (2%)
[12:10:49] Completed 15000 out of 500000 steps (3%)
[12:15:33] Completed 20000 out of 500000 steps (4%)
[12:20:18] Completed 25000 out of 500000 steps (5%)
[12:25:02] Completed 30000 out of 500000 steps (6%)
[12:29:45] Completed 35000 out of 500000 steps (7%)
[12:34:30] Completed 40000 out of 500000 steps (8%)
[12:39:14] Completed 45000 out of 500000 steps (9%)
[12:43:59] Completed 50000 out of 500000 steps (10%)
[12:48:44] Completed 55000 out of 500000 steps (11%)
[12:53:29] Completed 60000 out of 500000 steps (12%)
[12:58:14] Completed 65000 out of 500000 steps (13%)
[13:02:58] Completed 70000 out of 500000 steps (14%)
[13:07:43] Completed 75000 out of 500000 steps (15%)
[13:12:30] Completed 80000 out of 500000 steps (16%)
[13:17:16] Completed 85000 out of 500000 steps (17%)
[13:22:01] Completed 90000 out of 500000 steps (18%)
[13:26:47] Completed 95000 out of 500000 steps (19%)
[13:31:32] Completed 100000 out of 500000 steps (20%)
[13:36:17] Completed 105000 out of 500000 steps (21%)
[13:41:02] Completed 110000 out of 500000 steps (22%)
[13:45:50] Completed 115000 out of 500000 steps (23%)
[13:50:35] Completed 120000 out of 500000 steps (24%)
[13:55:18] Completed 125000 out of 500000 steps (25%)
[14:00:01] Completed 130000 out of 500000 steps (26%)
[14:04:27] - Autosending finished units... [August 25 14:04:27 UTC]
[14:04:27] Trying to send all finished work units
[14:04:27] + No unsent completed units remaining.
[14:04:27] - Autosend completed
[14:04:44] Completed 135000 out of 500000 steps (27%)
[14:09:28] Completed 140000 out of 500000 steps (28%)
[14:14:12] Completed 145000 out of 500000 steps (29%)
[14:18:58] Completed 150000 out of 500000 steps (30%)
[14:23:44] Completed 155000 out of 500000 steps (31%)
[14:28:29] Completed 160000 out of 500000 steps (32%)
[14:33:13] Completed 165000 out of 500000 steps (33%)
[14:37:59] Completed 170000 out of 500000 steps (34%)
[14:42:44] Completed 175000 out of 500000 steps (35%)
[14:47:28] Completed 180000 out of 500000 steps (36%)
[14:52:12] Completed 185000 out of 500000 steps (37%)
[14:56:56] Completed 190000 out of 500000 steps (38%)
[15:02:57] Completed 195000 out of 500000 steps (39%)
[15:07:40] Completed 200000 out of 500000 steps (40%)
[15:12:23] Completed 205000 out of 500000 steps (41%)
[15:17:07] Completed 210000 out of 500000 steps (42%)
[15:21:50] Completed 215000 out of 500000 steps (43%)
[15:26:34] Completed 220000 out of 500000 steps (44%)
[15:31:18] Completed 225000 out of 500000 steps (45%)
[15:36:02] Completed 230000 out of 500000 steps (46%)
[15:40:44] Completed 235000 out of 500000 steps (47%)
[15:45:26] Completed 240000 out of 500000 steps (48%)
[15:50:08] Completed 245000 out of 500000 steps (49%)
[15:54:48] Completed 250000 out of 500000 steps (50%)
[15:59:30] Completed 255000 out of 500000 steps (51%)
[16:04:13] Completed 260000 out of 500000 steps (52%)
[16:08:55] Completed 265000 out of 500000 steps (53%)
[16:13:38] Completed 270000 out of 500000 steps (54%)
[16:18:19] Completed 275000 out of 500000 steps (55%)
[16:23:01] Completed 280000 out of 500000 steps (56%)
[16:27:44] Completed 285000 out of 500000 steps (57%)
[16:32:25] Completed 290000 out of 500000 steps (58%)
[16:37:07] Completed 295000 out of 500000 steps (59%)
[16:41:49] Completed 300000 out of 500000 steps (60%)
[16:46:31] Completed 305000 out of 500000 steps (61%)
[16:51:14] Completed 310000 out of 500000 steps (62%)
[16:55:56] Completed 315000 out of 500000 steps (63%)
[17:00:38] Completed 320000 out of 500000 steps (64%)
[17:05:21] Completed 325000 out of 500000 steps (65%)
[17:10:03] Completed 330000 out of 500000 steps (66%)
[17:14:46] Completed 335000 out of 500000 steps (67%)
[17:19:29] Completed 340000 out of 500000 steps (68%)
[17:24:12] Completed 345000 out of 500000 steps (69%)
[17:28:54] Completed 350000 out of 500000 steps (70%)
[17:33:36] Completed 355000 out of 500000 steps (71%)
[17:38:17] Completed 360000 out of 500000 steps (72%)
[17:42:57] Completed 365000 out of 500000 steps (73%)
[17:47:37] Completed 370000 out of 500000 steps (74%)
[17:52:19] Completed 375000 out of 500000 steps (75%)
[17:57:01] Completed 380000 out of 500000 steps (76%)
[18:01:44] Completed 385000 out of 500000 steps (77%)
[18:06:27] Completed 390000 out of 500000 steps (78%)
[18:11:08] Completed 395000 out of 500000 steps (79%)
[18:15:52] Completed 400000 out of 500000 steps (80%)
[18:20:33] Completed 405000 out of 500000 steps (81%)
[18:25:15] Completed 410000 out of 500000 steps (82%)
[18:29:56] Completed 415000 out of 500000 steps (83%)
[18:34:39] Completed 420000 out of 500000 steps (84%)
[18:39:20] Completed 425000 out of 500000 steps (85%)
[18:44:01] Completed 430000 out of 500000 steps (86%)
[18:49:04] Completed 435000 out of 500000 steps (87%)
[18:53:46] Completed 440000 out of 500000 steps (88%)
[18:58:29] Completed 445000 out of 500000 steps (89%)
[19:03:12] Completed 450000 out of 500000 steps (90%)
[19:07:56] Completed 455000 out of 500000 steps (91%)
[19:12:38] Completed 460000 out of 500000 steps (92%)
[19:17:20] Completed 465000 out of 500000 steps (93%)
[19:22:02] Completed 470000 out of 500000 steps (94%)
[19:26:43] Completed 475000 out of 500000 steps (95%)
[19:31:25] Completed 480000 out of 500000 steps (96%)
[19:36:08] Completed 485000 out of 500000 steps (97%)
[19:40:49] Completed 490000 out of 500000 steps (98%)
[19:45:32] Completed 495000 out of 500000 steps (99%)
[19:50:14] Completed 500000 out of 500000 steps (100%)
[19:50:15] DynamicWrapper: Finished Work Unit: sleep=10000
[19:50:25]
[19:50:25] Finished Work Unit:
[19:50:25] - Reading up to 3717600 from "work/wudata_08.trr": Read 3717600
[19:50:25] trr file hash check passed.
[19:50:25] edr file hash check passed.
[19:50:25] logfile size: 59920
[19:50:25] Leaving Run
[19:50:29] - Writing 3813080 bytes of core data to disk...
[19:50:30] Done: 3812568 -> 3533922 (compressed to 92.6 percent)
[19:50:30] ... Done.
[19:50:32] - Shutting down core
[19:50:32]
[19:50:32] Folding@home Core Shutdown: FINISHED_UNIT
[19:50:35] CoreStatus = 64 (100)
[19:50:35] Unit 8 finished with 92 percent of time to deadline remaining.
[19:50:35] Updated performance fraction: 0.957942
[19:50:35] Sending work to server
[19:50:35] Project: 7163 (Run 0, Clone 67, Gen 180)
[19:50:35] + Attempting to send results [August 25 19:50:35 UTC]
[19:50:35] - Reading file work/wuresults_08.dat from core
[19:50:35] (Read 3534434 bytes from disk)
[19:50:35] Connecting to http://128.143.199.96:8080/
[19:51:50] Posted data.
[19:51:50] Initial: 0000; - Uploaded at ~46 kB/s
[19:51:50] - Averaged speed for that direction ~50 kB/s
[19:51:50] + Results successfully sent
[19:51:50] Thank you for your contribution to Folding@Home.
[19:51:50] + Number of Units Completed: 837
[19:51:55] Trying to send all finished work units
[19:51:55] + No unsent completed units remaining.
[19:51:55] - Preparing to get new work unit...
[19:51:55] Cleaning up work directory
[19:51:55] + Attempting to get work packet
[19:51:55] - Will indicate memory of 8174 MB
[19:51:55] - Connecting to assignment server
[19:51:55] Connecting to http://assign.stanford.edu:8080/
[19:51:56] Posted data.
[19:51:56] Initial: 4081; - Successful: assigned to (129.64.95.82).
[19:51:56] + News From Folding@Home: Welcome to Folding@Home
[19:51:56] Loaded queue successfully.
[19:51:56] Empty passkey
[19:51:56] Connecting to http://129.64.95.82:8080/
[19:52:00] Posted data.
[19:52:00] Initial: 0000; - Receiving payload (expected size: 664129)
[19:52:00] Conversation time very short, giving reduced weight in bandwidth avg
[19:52:00] - Downloaded at ~1297 kB/s
[19:52:00] - Averaged speed for that direction ~1131 kB/s
[19:52:00] + Received work.
[19:52:00] Trying to send all finished work units
[19:52:00] + No unsent completed units remaining.
[19:52:00] + Closed connections
[19:52:00]
[19:52:00] + Processing work unit
[19:52:00] A4 will attempt to use 4 threads.
[19:52:00] Core required: FahCore_a4.exe
[19:52:00] Core found.
[19:52:00] Working on queue slot 09 [August 25 19:52:00 UTC]
[19:52:00] + Working ...
[19:52:00] - Calling '.\FahCore_a4.exe -dir work/ -nice 19 -suffix 09 -np 4 -checkpoint 15 -verbose -lifeline 4124 -version 634'
[19:52:00]
[19:52:00] *------------------------------*
[19:52:00] Folding@Home Gromacs GB Core
[19:52:00] Version 2.27 (Dec. 15, 2010)
[19:52:00]
[19:52:00] Preparing to commence simulation
[19:52:00] - Looking at optimizations...
[19:52:00] - Created dyn
[19:52:00] - Files status OK
[19:52:00] - Expanded 663617 -> 1297016 (decompressed 195.4 percent)
[19:52:00] Called DecompressByteArray: compressed_data_size=663617 data_size=1297016, decompressed_data_size=1297016 diff=0
[19:52:00] - Digital signature verified
[19:52:00]
[19:52:00] Project: 7200 (Run 31, Clone 4, Gen 319)
[19:52:00]
[19:52:00] Assembly optimizations on if available.
[19:52:00] Entering M.D.
[19:52:06] Mapping NT from 4 to 4
[19:52:06] Completed 0 out of 750000 steps (0%)
[19:56:20] Completed 7500 out of 750000 steps (1%)
[20:00:32] Completed 15000 out of 750000 steps (2%)
[20:04:27] - Autosending finished units... [August 25 20:04:27 UTC]
[20:04:27] Trying to send all finished work units
[20:04:27] + No unsent completed units remaining.
[20:04:27] - Autosend completed
[20:04:47] Completed 22500 out of 750000 steps (3%)
[20:09:01] Completed 30000 out of 750000 steps (4%)
bruce
I have left the start of the log with my passkey and username and then from the end of the previous wu to the start of the wu after the questioned wu which got bonus awarded
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 12:58 pm
by PinHead
Looks like something in your config changed truder44
Code: Select all
[11:56:16] Loaded queue successfully.
[11:56:16] Empty passkey
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 1:22 pm
by truder44
PinHead wrote:Looks like something in your config changed truder44
Code: Select all
[11:56:16] Loaded queue successfully.
[11:56:16] Empty passkey
PinHead
This doesn't appear to be the problem. Every WU in the log has the same empty passkey line and all the others got bonus.
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 1:45 pm
by artoar_11
Code: Select all
Arguments: -verbosity 9 -smp -smp -verbosity 9
@truder44,
you have twice "-smp". But that's not the problem, for information only.
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 2:20 pm
by truder44
I am more puzzled now.
Project: 7163 (Run 0, Clone 67, Gen 180) Base points only. Completed and returned 8 hours
Project: 7200 (Run 31, Clone 4, Gen 319) Bonus awarded. Completed and returned 7 hours
Project: 6990 (Run 0, Clone 129, Gen 178) Base points only. Completed and returned 8.5 hours
The last 3 WU on this machine, in order of completion.
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 2:23 pm
by bollix47
@truder44,
Can you please check the passkey in both client.cfg files. It's beginning to look like one of them has a space or a null at the beginning(probably the new one). Maybe even reconfigure both and copy/paste the passkey from the original e-mail if you still have it.
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 2:46 pm
by truder44
Code: Select all
[settings]
username=truder44
team=3542
passkey=
asknet=no
machineid=2
bigpackets=big
extra_parms=-smp -verbosity 9
local=839
[http]
active=no
host=localhost
port=8080
usereg=no
[core]
addr=
This is the client.cfg file for the client with the listed WU
I did not enter a passkey for the V7 client on the new machine.
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 2:49 pm
by bollix47
passkey=
I did not enter a passkey for the V7 client on the new machine.
No passkey = no bonus.
Your passkey must be entered into all your client configurations in order for them to receive a bonus.
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 3:16 pm
by truder44
bollix47 wrote:passkey=
I did not enter a passkey for the V7 client on the new machine.
No passkey = no bonus.
Your passkey must be entered into all your client configurations in order for them to receive a bonus.
In that case why did I get bonus on the Project 7200 WU?
It is that long since I got the passkey that I don;t even have the computer I received the email on any more
Should I get a new passkey assigned?
Re: Base points only awarded -No bonus? Project: 7163
Posted: Sun Aug 26, 2012 3:20 pm
by bollix47
Your client stats say you have had 4 active clients in the last 7 days and you've said you have 2.
http://fah-web.stanford.edu/cgi-bin/mai ... e=truder44
Why the difference?
Are you aware of anyone else folding using your name?
Regardless, you won't get a bonus without a passkey and according to the database you have two different passkeys in use now or in the past.