project:7808 no bonus point on smp & gpu not work
Posted: Thu May 31, 2012 7:24 am
Hello,
on project:7808 run:8 clone:107 gen:46 core:0xa I didn't receive the bonus point on smp client. I receive ~1500 points instead of 7837. I've finished ~1,5 days. I use the smp&gpu on the new standard client. The machine is a dell with a quad 8400, 8gb ram & a gt220.
This is the log from smp:
The gpu client of the new standard client, doesn't work at all. The error is "Unstable machine". I had the same problem, some time ago, on a laptop http://foldingforum.org/viewtopic.php?f=52&t=20404, and after some searching concluded that doesn't work on quadro 140m. The question now is: if works on gt220? I tried several nvidia drivers, none works. The temperature is good 40-50 degree.
Here is the log for gpu:
on project:7808 run:8 clone:107 gen:46 core:0xa I didn't receive the bonus point on smp client. I receive ~1500 points instead of 7837. I've finished ~1,5 days. I use the smp&gpu on the new standard client. The machine is a dell with a quad 8400, 8gb ram & a gt220.
This is the log from smp:
Code: Select all
...
13:55:50:WU01:FS01:0xa4:Completed 1350000 out of 1500000 steps (90%)
14:41:25:WU01:FS01:0xa4:Completed 1365000 out of 1500000 steps (91%)
15:36:43:WU01:FS01:0xa4:Completed 1380000 out of 1500000 steps (92%)
16:17:04:WU01:FS01:0xa4:Completed 1395000 out of 1500000 steps (93%)
16:43:37:WU01:FS01:0xa4:Completed 1410000 out of 1500000 steps (94%)
17:01:51:WU01:FS01:0xa4:Completed 1425000 out of 1500000 steps (95%)
17:20:05:WU01:FS01:0xa4:Completed 1440000 out of 1500000 steps (96%)
17:38:20:WU01:FS01:0xa4:Completed 1455000 out of 1500000 steps (97%)
17:56:34:WU01:FS01:0xa4:Completed 1470000 out of 1500000 steps (98%)
18:14:48:WU01:FS01:0xa4:Completed 1485000 out of 1500000 steps (99%)
18:14:49:WU02:FS01:Connecting to assign3.stanford.edu:8080
18:14:50:WU02:FS01:News: Welcome to Folding@Home
18:14:50:WU02:FS01:Assigned to work server 171.64.65.99
18:14:50:WU02:FS01:Requesting new work unit for slot 01: RUNNING smp:4 from 171.64.65.99
18:14:50:WU02:FS01:Connecting to 171.64.65.99:8080
18:14:51:WU02:FS01:Downloading 1.96MiB
18:14:55:WU02:FS01:Download complete
18:14:55:WU02:FS01:Received Unit: id:02 state:DOWNLOAD error:OK project:7808 run:8 clone:107 gen:46 core:0xa4 unit:0x000000380a3b1e874e3100a24a5a7233
18:33:04:WU01:FS01:0xa4:Completed 1500000 out of 1500000 steps (100%)
18:33:05:WU01:FS01:0xa4:DynamicWrapper: Finished Work Unit: sleep=10000
18:33:15:WU01:FS01:0xa4:
18:33:15:WU01:FS01:0xa4:Finished Work Unit:
18:33:15:WU01:FS01:0xa4:- Reading up to 2851056 from "01/wudata_01.trr": Read 2851056
18:33:15:WU01:FS01:0xa4:trr file hash check passed.
18:33:15:WU01:FS01:0xa4:- Reading up to 1524072 from "01/wudata_01.xtc": Read 1524072
18:33:15:WU01:FS01:0xa4:xtc file hash check passed.
18:33:15:WU01:FS01:0xa4:edr file hash check passed.
18:33:15:WU01:FS01:0xa4:logfile size: 35214
18:33:15:WU01:FS01:0xa4:Leaving Run
18:33:17:WU01:FS01:0xa4:- Writing 4415354 bytes of core data to disk...
18:33:19:WU01:FS01:0xa4:Done: 4414842 -> 4244934 (compressed to 96.1 percent)
18:33:19:WU01:FS01:0xa4: ... Done.
18:33:21:WU01:FS01:0xa4:- Shutting down core
18:33:21:WU01:FS01:0xa4:
18:33:21:WU01:FS01:0xa4:Folding@home Core Shutdown: FINISHED_UNIT
18:33:22:WU01:FS01:FahCore returned: FINISHED_UNIT (100 = 0x64)
18:33:22:WU01:FS01:Sending unit results: id:01 state:SEND error:OK project:7808 run:8 clone:79 gen:32 core:0xa4 unit:0x000000270a3b1e874e3100843c293319
18:33:22:WU01:FS01:Uploading 4.05MiB to 171.64.65.99
18:33:22:WU02:FS01:Starting
18:33:22:WU01:FS01:Connecting to 171.64.65.99:8080
18:33:22:WU02:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Program Files/fold/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe" -dir 02 -suffix 01 -version 701 -lifeline 3020 -checkpoint 15 -np 4
18:33:23:WU02:FS01:Started FahCore on PID 1392
18:33:23:WU02:FS01:Core PID:3892
18:33:23:WU02:FS01:FahCore 0xa4 started
18:33:23:WU02:FS01:0xa4:
18:33:23:WU02:FS01:0xa4:*------------------------------*
18:33:23:WU02:FS01:0xa4:Folding@Home Gromacs GB Core
18:33:23:WU02:FS01:0xa4:Version 2.27 (Dec. 15, 2010)
18:33:23:WU02:FS01:0xa4:
18:33:23:WU02:FS01:0xa4:Preparing to commence simulation
18:33:23:WU02:FS01:0xa4:- Looking at optimizations...
18:33:23:WU02:FS01:0xa4:- Created dyn
18:33:23:WU02:FS01:0xa4:- Files status OK
18:33:23:WU02:FS01:0xa4:- Expanded 2053966 -> 5365960 (decompressed 261.2 percent)
18:33:23:WU02:FS01:0xa4:Called DecompressByteArray: compressed_data_size=2053966 data_size=5365960, decompressed_data_size=5365960 diff=0
18:33:23:WU02:FS01:0xa4:- Digital signature verified
18:33:23:WU02:FS01:0xa4:
18:33:23:WU02:FS01:0xa4:Project: 7808 (Run 8, Clone 107, Gen 46)
18:33:23:WU02:FS01:0xa4:
18:33:23:WU02:FS01:0xa4:Assembly optimizations on if available.
18:33:23:WU02:FS01:0xa4:Entering M.D.
18:33:28:WU01:FS01:Upload 7.72%
18:33:29:WU02:FS01:0xa4:Mapping NT from 4 to 4
18:33:30:WU02:FS01:0xa4:Completed 0 out of 1500000 steps (0%)
18:33:34:WU01:FS01:Upload 15.44%
18:33:40:WU01:FS01:Upload 23.16%
18:33:46:WU01:FS01:Upload 32.42%
18:33:52:WU01:FS01:Upload 40.14%
18:33:58:WU01:FS01:Upload 47.85%
18:34:04:WU01:FS01:Upload 57.12%
18:34:10:WU01:FS01:Upload 64.83%
18:34:16:WU01:FS01:Upload 74.10%
18:34:22:WU01:FS01:Upload 81.81%
18:34:28:WU01:FS01:Upload 89.53%
18:34:34:WU01:FS01:Upload 98.80%
18:34:36:WU01:FS01:Upload complete
18:34:36:WU01:FS01:Server responded WORK_ACK (400)
18:34:36:WU01:FS01:Final credit estimate, 7837.00 points
18:34:36:WU01:FS01:Cleaning up
...The gpu client of the new standard client, doesn't work at all. The error is "Unstable machine". I had the same problem, some time ago, on a laptop http://foldingforum.org/viewtopic.php?f=52&t=20404, and after some searching concluded that doesn't work on quadro 140m. The question now is: if works on gt220? I tried several nvidia drivers, none works. The temperature is good 40-50 degree.
Here is the log for gpu:
Code: Select all
...
13:15:18:WU00:FS00:Connecting to assign-GPU.stanford.edu:80
13:15:19:WU00:FS00:News: Welcome to Folding@Home
13:15:19:WU00:FS00:Assigned to work server 171.67.108.21
13:15:19:WU00:FS00:Requesting new work unit for slot 00: READY gpu:0:"GT216 [GeForce GT 220]" from 171.67.108.21
13:15:19:WU00:FS00:Connecting to 171.67.108.21:8080
13:15:20:WU00:FS00:Downloading 61.92KiB
13:15:21:WU00:FS00:Download complete
13:15:21:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:OK project:10501 run:210 clone:0 gen:1253 core:0x11 unit:0x00000b4d6652eda54b6ea80f00005208
13:15:21:WU00:FS00:Starting
13:15:21:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Program Files/fold/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe" -dir 00 -suffix 01 -version 701 -lifeline 3020 -checkpoint 15 -gpu 0
13:15:21:WU00:FS00:Started FahCore on PID 3572
13:15:21:WU00:FS00:Core PID:3120
13:15:21:WU00:FS00:FahCore 0x11 started
13:15:22:WU00:FS00:0x11:
13:15:22:WU00:FS00:0x11:*------------------------------*
13:15:22:WU00:FS00:0x11:Folding@Home GPU Core
13:15:22:WU00:FS00:0x11:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
13:15:22:WU00:FS00:0x11:
13:15:22:WU00:FS00:0x11:Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
13:15:22:WU00:FS00:0x11:Build host: amoeba
13:15:22:WU00:FS00:0x11:Board Type: Nvidia
13:15:22:WU00:FS00:0x11:Core :
13:15:22:WU00:FS00:0x11:Preparing to commence simulation
13:15:22:WU00:FS00:0x11:- Looking at optimizations...
13:15:22:WU00:FS00:0x11:DeleteFrameFiles: successfully deleted file=00/wudata_01.ckp
13:15:22:WU00:FS00:0x11:- Created dyn
13:15:22:WU00:FS00:0x11:- Files status OK
13:15:22:WU00:FS00:0x11:- Expanded 62896 -> 336763 (decompressed 535.4 percent)
13:15:22:WU00:FS00:0x11:Called DecompressByteArray: compressed_data_size=62896 data_size=336763, decompressed_data_size=336763 diff=0
13:15:22:WU00:FS00:0x11:- Digital signature verified
13:15:22:WU00:FS00:0x11:
13:15:22:WU00:FS00:0x11:Project: 10501 (Run 210, Clone 0, Gen 1253)
13:15:22:WU00:FS00:0x11:
13:15:22:WU00:FS00:0x11:Assembly optimizations on if available.
13:15:22:WU00:FS00:0x11:Entering M.D.
13:15:27:WU00:FS00:0x11:Tpr hash 00/wudata_01.tpr: 4147006357 1919342942 2961955421 1294024924 2333773718
13:15:27:WU00:FS00:0x11:
13:15:27:WU00:FS00:0x11:Calling fah_main args: 14 usage=100
13:15:27:WU00:FS00:0x11:
13:15:28:WU00:FS00:0x11:mdrun_gpu returned
13:15:28:WU00:FS00:0x11:Going to send back what have done -- stepsTotalG=0
13:15:28:WU00:FS00:0x11:Work fraction=0.0000 steps=0.
13:15:32:WU00:FS00:0x11:logfile size=4946 infoLength=4946 edr=0 trr=25
13:15:32:WU00:FS00:0x11:+ Opened results file
13:15:32:WU00:FS00:0x11:- Writing 5484 bytes of core data to disk...
13:15:32:WU00:FS00:0x11:Done: 4972 -> 1855 (compressed to 37.3 percent)
13:15:32:WU00:FS00:0x11: ... Done.
13:15:32:WU00:FS00:0x11:DeleteFrameFiles: successfully deleted file=00/wudata_01.ckp
13:15:32:WU00:FS00:0x11:
13:15:32:WU00:FS00:0x11:Folding@home Core Shutdown: UNSTABLE_MACHINE
13:15:32:WU00:FS00:FahCore returned: UNSTABLE_MACHINE (122 = 0x7a)
13:15:33:WU00:FS00:Sending unit results: id:00 state:SEND error:FAULTY project:10501 run:210 clone:0 gen:1253 core:0x11 unit:0x00000b4d6652eda54b6ea80f00005208
13:15:33:WU00:FS00:Uploading 2.31KiB to 171.67.108.21
13:15:33:WU00:FS00:Connecting to 171.67.108.21:8080
13:15:33:WU02:FS00:Connecting to assign-GPU.stanford.edu:80
13:15:33:WU00:FS00:Upload complete
13:15:33:WU00:FS00:Server responded WORK_ACK (400)
13:15:33:WU00:FS00:Cleaning up
13:15:34:WU02:FS00:News: Welcome to Folding@Home
13:15:34:WU02:FS00:Assigned to work server 171.67.108.21
13:15:34:WU02:FS00:Requesting new work unit for slot 00: READY gpu:0:"GT216 [GeForce GT 220]" from 171.67.108.21
13:15:34:WU02:FS00:Connecting to 171.67.108.21:8080
13:15:34:WU02:FS00:Downloading 62.00KiB
13:15:35:WU02:FS00:Download complete
13:15:35:WU02:FS00:Received Unit: id:02 state:DOWNLOAD error:OK project:10501 run:66 clone:0 gen:728 core:0x11 unit:0x0000072b6652eda54b6ea6d9000019c9
13:15:35:WU02:FS00:Starting
13:15:35:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Program Files/fold/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe" -dir 02 -suffix 01 -version 701 -lifeline 3020 -checkpoint 15 -gpu 0
13:15:35:WU02:FS00:Started FahCore on PID 1308
13:15:35:WU02:FS00:Core PID:124
13:15:35:WU02:FS00:FahCore 0x11 started
13:15:36:WU02:FS00:0x11:
13:15:36:WU02:FS00:0x11:*------------------------------*
13:15:36:WU02:FS00:0x11:Folding@Home GPU Core
13:15:36:WU02:FS00:0x11:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
13:15:36:WU02:FS00:0x11:
13:15:36:WU02:FS00:0x11:Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
13:15:36:WU02:FS00:0x11:Build host: amoeba
13:15:36:WU02:FS00:0x11:Board Type: Nvidia
13:15:36:WU02:FS00:0x11:Core :
13:15:36:WU02:FS00:0x11:Preparing to commence simulation
13:15:36:WU02:FS00:0x11:- Looking at optimizations...
13:15:36:WU02:FS00:0x11:DeleteFrameFiles: successfully deleted file=02/wudata_01.ckp
13:15:36:WU02:FS00:0x11:- Created dyn
13:15:36:WU02:FS00:0x11:- Files status OK
13:15:36:WU02:FS00:0x11:- Expanded 62975 -> 336763 (decompressed 534.7 percent)
13:15:36:WU02:FS00:0x11:Called DecompressByteArray: compressed_data_size=62975 data_size=336763, decompressed_data_size=336763 diff=0
13:15:36:WU02:FS00:0x11:- Digital signature verified
13:15:36:WU02:FS00:0x11:
13:15:36:WU02:FS00:0x11:Project: 10501 (Run 66, Clone 0, Gen 728)
13:15:36:WU02:FS00:0x11:
13:15:36:WU02:FS00:0x11:Assembly optimizations on if available.
13:15:36:WU02:FS00:0x11:Entering M.D.
13:15:42:WU02:FS00:0x11:Tpr hash 02/wudata_01.tpr: 1481162712 3946082016 3313626200 1225176455 3710857566
13:15:42:WU02:FS00:0x11:
13:15:42:WU02:FS00:0x11:Calling fah_main args: 14 usage=100
13:15:42:WU02:FS00:0x11:
13:15:42:WU02:FS00:0x11:mdrun_gpu returned
13:15:42:WU02:FS00:0x11:Going to send back what have done -- stepsTotalG=0
13:15:42:WU02:FS00:0x11:Work fraction=0.0000 steps=0.
13:15:46:WU02:FS00:0x11:logfile size=4945 infoLength=4945 edr=0 trr=25
13:15:46:WU02:FS00:0x11:+ Opened results file
13:15:46:WU02:FS00:0x11:- Writing 5483 bytes of core data to disk...
13:15:46:WU02:FS00:0x11:Done: 4971 -> 1847 (compressed to 37.1 percent)
13:15:46:WU02:FS00:0x11: ... Done.
13:15:46:WU02:FS00:0x11:DeleteFrameFiles: successfully deleted file=02/wudata_01.ckp
13:15:46:WU02:FS00:0x11:
13:15:46:WU02:FS00:0x11:Folding@home Core Shutdown: UNSTABLE_MACHINE
13:15:46:WU02:FS00:FahCore returned: UNSTABLE_MACHINE (122 = 0x7a)
13:15:46:WU02:FS00:Sending unit results: id:02 state:SEND error:FAULTY project:10501 run:66 clone:0 gen:728 core:0x11 unit:0x0000072b6652eda54b6ea6d9000019c9
13:15:46:WU02:FS00:Uploading 2.30KiB to 171.67.108.21
13:15:46:WU02:FS00:Connecting to 171.67.108.21:8080
13:15:46:WU00:FS00:Connecting to assign-GPU.stanford.edu:80
13:15:47:WU02:FS00:Upload complete
13:15:47:WU02:FS00:Server responded WORK_ACK (400)
13:15:47:WU02:FS00:Cleaning up
13:15:47:WU00:FS00:News: Welcome to Folding@Home
13:15:47:WU00:FS00:Assigned to work server 171.67.108.21
13:15:47:WU00:FS00:Requesting new work unit for slot 00: READY gpu:0:"GT216 [GeForce GT 220]" from 171.67.108.21
13:15:47:WU00:FS00:Connecting to 171.67.108.21:8080
13:15:48:WU00:FS00:Downloading 62.00KiB
13:15:49:WU00:FS00:Download complete
13:15:49:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:OK project:10501 run:32 clone:0 gen:723 core:0x11 unit:0x000005d16652eda54b6ea68800000c7f
13:15:49:WU00:FS00:Starting
13:15:49:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Program Files/fold/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe" -dir 00 -suffix 01 -version 701 -lifeline 3020 -checkpoint 15 -gpu 0
13:15:49:WU00:FS00:Started FahCore on PID 1172
13:15:49:WU00:FS00:Core PID:1508
13:15:49:WU00:FS00:FahCore 0x11 started
13:15:49:WU00:FS00:0x11:
13:15:49:WU00:FS00:0x11:*------------------------------*
13:15:49:WU00:FS00:0x11:Folding@Home GPU Core
13:15:49:WU00:FS00:0x11:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
13:15:49:WU00:FS00:0x11:
13:15:49:WU00:FS00:0x11:Compiler : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
13:15:49:WU00:FS00:0x11:Build host: amoeba
13:15:49:WU00:FS00:0x11:Board Type: Nvidia
13:15:49:WU00:FS00:0x11:Core :
13:15:49:WU00:FS00:0x11:Preparing to commence simulation
13:15:49:WU00:FS00:0x11:- Looking at optimizations...
13:15:49:WU00:FS00:0x11:DeleteFrameFiles: successfully deleted file=00/wudata_01.ckp
13:15:49:WU00:FS00:0x11:- Created dyn
13:15:49:WU00:FS00:0x11:- Files status OK
13:15:49:WU00:FS00:0x11:- Expanded 62980 -> 336763 (decompressed 534.7 percent)
13:15:49:WU00:FS00:0x11:Called DecompressByteArray: compressed_data_size=62980 data_size=336763, decompressed_data_size=336763 diff=0
13:15:49:WU00:FS00:0x11:- Digital signature verified
13:15:49:WU00:FS00:0x11:
13:15:49:WU00:FS00:0x11:Project: 10501 (Run 32, Clone 0, Gen 723)
13:15:49:WU00:FS00:0x11:
13:15:49:WU00:FS00:0x11:Assembly optimizations on if available.
13:15:49:WU00:FS00:0x11:Entering M.D.
13:15:53:FS00:Paused
13:15:53:FS00:Shutting core down
13:15:55:WU00:FS00:0x11:Tpr hash 00/wudata_01.tpr: 1112997434 3278671354 2702580443 2263343962 1408889887
13:15:55:WU00:FS00:0x11:
13:15:55:WU00:FS00:0x11:Calling fah_main args: 14 usage=100
13:15:55:WU00:FS00:0x11:
13:15:55:WU00:FS00:0x11:mdrun_gpu returned
13:15:55:WU00:FS00:0x11:Going to send back what have done -- stepsTotalG=0
13:15:55:WU00:FS00:0x11:Work fraction=0.0000 steps=0.
13:15:59:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
...