Folding Forum

Posted: **Sat Mar 31, 2012 4:52 am**

This was downloaded and kept restarting after an error for about 2 hours. The client did detect that 8 improper terminations had occurred, but still kept trying to run it. I have dumped the WU.

Download size was abnormally small at 21.4 KiB, other Project 7600 WU's have been around 295 KiB. Should be one report from my dumping the WU.

Folding Client V7.1.52, OS - OS X 10.6.8

Code: Select all

01:31:45:WU01:FS00:Connecting to assign3.stanford.edu:8080
01:31:45:WU01:FS00:News: Welcome to Folding@Home
01:31:45:WU01:FS00:Assigned to work server 171.64.65.101
01:31:45:WU01:FS00:Requesting new work unit for slot 00: RUNNING smp:8 from 171.64.65.101
01:31:45:WU01:FS00:Connecting to 171.64.65.101:8080
01:31:46:WU01:FS00:Downloading 21.43KiB
01:31:46:WU01:FS00:Download complete
01:31:46:WU01:FS00:Received Unit: id:01 state:DOWNLOAD error:OK project:7600 run:3 clone:3 gen:38 core:0xa4 unit:0x00000090664f2dcd4dee89730f5431fa
01:31:58:WU01:FS00:Starting
01:31:58:WU01:FS00:Running FahCore: /usr/bin/FAHCoreWrapper "/Library/Application Support/FAHClient/cores/www.stanford.edu/~pande/OSX/x86/Core_a4.fah/FahCore_a4" -dir 01 -suffix 01 -version 701 -lifeline 60 -checkpoint 15 -np 8
01:31:58:WU01:FS00:Started FahCore on PID 6669
01:31:58:WU01:FS00:Core PID:6673
01:31:58:WU01:FS00:FahCore 0xa4 started
01:31:58:WU01:FS00:0xa4:
01:31:58:WU01:FS00:0xa4:*------------------------------*
01:31:58:WU01:FS00:0xa4:Folding@Home Gromacs Core
01:31:58:WU01:FS00:0xa4:Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
01:31:58:WU01:FS00:0xa4:
01:31:58:WU01:FS00:0xa4:Preparing to commence simulation
01:31:58:WU01:FS00:0xa4:- Looking at optimizations...
01:31:58:WU01:FS00:0xa4:- Created dyn
01:31:58:WU01:FS00:0xa4:- Files status OK
01:31:58:WU01:FS00:0xa4:- Expanded 21435 -> 505352 (decompressed 2357.6 percent)
01:31:58:WU01:FS00:0xa4:Called DecompressByteArray: compressed_data_size=21435 data_size=505352, decompressed_data_size=505352 diff=0
01:31:58:WU01:FS00:0xa4:- Digital signature verified
01:31:58:WU01:FS00:0xa4:
01:31:58:WU01:FS00:0xa4:Project: 7600 (Run 3, Clone 3, Gen 38)
01:31:58:WU01:FS00:0xa4:
01:31:58:WU01:FS00:0xa4:Assembly optimizations on if available.
01:31:58:WU01:FS00:0xa4:Entering M.D.
01:32:04:WU01:FS00:0xa4:Mapping NT from 8 to 8 
01:32:05:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
01:32:05:WU01:FS00:Starting
01:32:05:WU01:FS00:Running FahCore: /usr/bin/FAHCoreWrapper "/Library/Application Support/FAHClient/cores/www.stanford.edu/~pande/OSX/x86/Core_a4.fah/FahCore_a4" -dir 01 -suffix 01 -version 701 -lifeline 60 -checkpoint 15 -np 8
01:32:05:WU01:FS00:Started FahCore on PID 6675
01:32:05:WU01:FS00:Core PID:6676
01:32:05:WU01:FS00:FahCore 0xa4 started
01:32:06:WU01:FS00:0xa4:
01:32:06:WU01:FS00:0xa4:*------------------------------*
01:32:06:WU01:FS00:0xa4:Folding@Home Gromacs Core
01:32:06:WU01:FS00:0xa4:Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
01:32:06:WU01:FS00:0xa4:
01:32:06:WU01:FS00:0xa4:Preparing to commence simulation
01:32:06:WU01:FS00:0xa4:- Ensuring status. Please wait.
01:32:15:WU01:FS00:0xa4:- Looking at optimizations...
01:32:15:WU01:FS00:0xa4:- Working with standard loops on this execution.
01:32:15:WU01:FS00:0xa4:- Previous termination of core was improper.
01:32:15:WU01:FS00:0xa4:- Files status OK
01:32:15:WU01:FS00:0xa4:- Expanded 21435 -> 505352 (decompressed 2357.6 percent)
01:32:15:WU01:FS00:0xa4:Called DecompressByteArray: compressed_data_size=21435 data_size=505352, decompressed_data_size=505352 diff=0
01:32:15:WU01:FS00:0xa4:- Digital signature verified
01:32:15:WU01:FS00:0xa4:
01:32:15:WU01:FS00:0xa4:Project: 7600 (Run 3, Clone 3, Gen 38)
01:32:15:WU01:FS00:0xa4:
01:32:15:WU01:FS00:0xa4:Entering M.D.
01:32:21:WU01:FS00:0xa4:Mapping NT from 8 to 8 
01:32:21:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
01:33:06:WU01:FS00:Starting
01:33:06:WU01:FS00:Running FahCore: /usr/bin/FAHCoreWrapper "/Library/Application Support/FAHClient/cores/www.stanford.edu/~pande/OSX/x86/Core_a4.fah/FahCore_a4" -dir 01 -suffix 01 -version 701 -lifeline 60 -checkpoint 15 -np 8
01:33:06:WU01:FS00:Started FahCore on PID 6677
01:33:06:WU01:FS00:Core PID:6681
01:33:06:WU01:FS00:FahCore 0xa4 started
01:33:06:WU01:FS00:0xa4:
01:33:06:WU01:FS00:0xa4:*------------------------------*
01:33:06:WU01:FS00:0xa4:Folding@Home Gromacs Core
01:33:06:WU01:FS00:0xa4:Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
01:33:06:WU01:FS00:0xa4:
01:33:06:WU01:FS00:0xa4:Preparing to commence simulation
01:33:06:WU01:FS00:0xa4:- Ensuring status. Please wait.
01:33:15:WU01:FS00:0xa4:- Looking at optimizations...
01:33:15:WU01:FS00:0xa4:- Working with standard loops on this execution.
01:33:15:WU01:FS00:0xa4:- Previous termination of core was improper.
01:33:15:WU01:FS00:0xa4:- Going to use standard loops.
01:33:15:WU01:FS00:0xa4:- Files status OK
01:33:15:WU01:FS00:0xa4:- Expanded 21435 -> 505352 (decompressed 2357.6 percent)
01:33:15:WU01:FS00:0xa4:Called DecompressByteArray: compressed_data_size=21435 data_size=505352, decompressed_data_size=505352 diff=0
01:33:15:WU01:FS00:0xa4:- Digital signature verified
01:33:15:WU01:FS00:0xa4:
01:33:15:WU01:FS00:0xa4:Project: 7600 (Run 3, Clone 3, Gen 38)
01:33:15:WU01:FS00:0xa4:
01:33:15:WU01:FS00:0xa4:Entering M.D.
01:33:21:WU01:FS00:0xa4:Mapping NT from 8 to 8 
01:33:22:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
01:34:43:WU01:FS00:Starting
01:34:43:WU01:FS00:Running FahCore: /usr/bin/FAHCoreWrapper "/Library/Application Support/FAHClient/cores/www.stanford.edu/~pande/OSX/x86/Core_a4.fah/FahCore_a4" -dir 01 -suffix 01 -version 701 -lifeline 60 -checkpoint 15 -np 8
01:34:43:WU01:FS00:Started FahCore on PID 6685
01:34:43:WU01:FS00:Core PID:6689
01:34:43:WU01:FS00:FahCore 0xa4 started
...
(several more repeats)
...
******************************** Date: 31/03/12 ********************************
03:33:29:WU01:FS00:Starting
03:33:29:WU01:FS00:Running FahCore: /usr/bin/FAHCoreWrapper "/Library/Application Support/FAHClient/cores/www.stanford.edu/~pande/OSX/x86/Core_a4.fah/FahCore_a4" -dir 01 -suffix 01 -version 701 -lifeline 60 -checkpoint 15 -np 8
03:33:29:WU01:FS00:Started FahCore on PID 6812
03:33:29:WU01:FS00:Core PID:6816
03:33:29:WU01:FS00:FahCore 0xa4 started
03:33:30:WU01:FS00:0xa4:
03:33:30:WU01:FS00:0xa4:*------------------------------*
03:33:30:WU01:FS00:0xa4:Folding@Home Gromacs Core
03:33:30:WU01:FS00:0xa4:Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
03:33:30:WU01:FS00:0xa4:
03:33:30:WU01:FS00:0xa4:Preparing to commence simulation
03:33:30:WU01:FS00:0xa4:- Ensuring status. Please wait.
03:33:39:WU01:FS00:0xa4:- Looking at optimizations...
03:33:39:WU01:FS00:0xa4:- Working with standard loops on this execution.
03:33:39:WU01:FS00:0xa4:Examination of work files indicates 8 consecutive improper terminations of core.
03:33:39:WU01:FS00:0xa4:- Expanded 21435 -> 505352 (decompressed 2357.6 percent)
03:33:39:WU01:FS00:0xa4:Called DecompressByteArray: compressed_data_size=21435 data_size=505352, decompressed_data_size=505352 diff=0
03:33:39:WU01:FS00:0xa4:- Digital signature verified
03:33:39:WU01:FS00:0xa4:
03:33:39:WU01:FS00:0xa4:Project: 7600 (Run 3, Clone 3, Gen 38)
03:33:39:WU01:FS00:0xa4:
03:33:39:WU01:FS00:0xa4:Entering M.D.
03:33:45:WU01:FS00:0xa4:Mapping NT from 8 to 8 
03:33:45:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

Posted: **Tue Apr 03, 2012 10:33 pm**

You successfully uploaded an error report for this WU
Hi Joe_H (team 38910),
Your WU (P7600 R3 C3 G38) was added to the stats database on 2012-03-30 20:07:41 for 0 points of credit.

It was successfully completed by someone else so the WU is not bad.
Hi XXX(team 0),
Your WU (P7600 R3 C3 G38) was added to the stats database on 2012-04-01 03:07:43 for 937 points of credit.

I do not understand the INTERRUPTED 102 message.

Posted: **Tue Apr 03, 2012 11:06 pm**

I do not understand the INTERRUPTED 102 message.

I don't understand it either. The system it was on processed WU's before and after just fine, including some from 7600. I did not spot anything in the F@H logs or the system logs that went along with this sequence of errors, and a restart did not help. Whatever it did not like about the WU was enough under a different SMP setting to error out and return the dump. I guess it hit a corner condition of some sort.

Posted: **Sat Jun 09, 2012 7:44 pm**

I don't know if this is relevant but I have the same error tonight:

Code: Select all

19:38:23:WU01:FS01:0x15:Folding@home Core Shutdown: UNSTABLE_MACHINE
19:38:23:WU01:FS01:FahCore returned: UNSTABLE_MACHINE (122 = 0x7a)
19:38:24:WU01:FS01:Starting
19:38:24:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Robert/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -version 701 -lifeline 1564 -checkpoint 15 -gpu 1
19:38:24:WU01:FS01:Started FahCore on PID 6040
19:38:24:WU01:FS01:Core PID:5604
19:38:24:WU01:FS01:FahCore 0x15 started
19:38:24:WU01:FS01:0x15:
19:38:24:WU01:FS01:0x15:*------------------------------*
19:38:24:WU01:FS01:0x15:Folding@Home GPU Core
19:38:24:WU01:FS01:0x15:Version                2.25 (Wed May 9 17:03:01 EDT 2012)
19:38:24:WU01:FS01:0x15:Build host             AmoebaRemote
19:38:24:WU01:FS01:0x15:Board Type             NVIDIA/CUDA
19:38:24:WU01:FS01:0x15:Core                   15
19:38:24:WU01:FS01:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
19:38:24:WU01:FS01:0x15:
19:38:24:WU01:FS01:0x15:Window's signal control handler registered.
19:38:24:WU01:FS01:0x15:Preparing to commence simulation
19:38:24:WU01:FS01:0x15:- Looking at optimizations...
19:38:24:WU01:FS01:0x15:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
19:38:24:WU01:FS01:0x15:- Created dyn
19:38:24:WU01:FS01:0x15:- Files status OK
19:38:24:WU01:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
19:38:24:WU01:FS01:0x15:- Expanded 548887 -> 891652 (decompressed 162.4 percent)
19:38:24:WU01:FS01:0x15:Called DecompressByteArray: compressed_data_size=548887 data_size=891652, decompressed_data_size=891652 diff=0
19:38:24:WU01:FS01:0x15:- Digital signature verified
19:38:24:WU01:FS01:0x15:
19:38:24:WU01:FS01:0x15:Project: 7640 (Run 179, Clone 0, Gen 24)
19:38:24:WU01:FS01:0x15:
19:38:24:WU01:FS01:0x15:Assembly optimizations on if available.
19:38:24:WU01:FS01:0x15:Entering M.D.
19:38:26:WU01:FS01:0x15:Tpr hash 01/wudata_01.tpr:  488629323 843779172 1851519278 2262349892 3971348050
19:38:26:WU01:FS01:0x15:GPU device id=1
19:38:26:WU01:FS01:0x15:Working on Generated by trjconv : 21521 p3064_lambda5_2003 t= 7750.00049 in water
19:38:26:WU01:FS01:0x15:Client config unavailable.
19:38:26:WU01:FS01:0x15:Starting GUI Server
19:39:08:FS01:Paused
19:39:08:FS01:Shutting core down
19:39:14:WU01:FS01:FahCore returned: INTERRUPTED (102 = 0x66)

Posted: **Sat Jun 09, 2012 7:49 pm**

robert2223 wrote:19:38:24:WU01:FS01:0x15:Project: 7640 (Run 179, Clone 0, Gen 24)

When you use the beta flag without joining the beta team, you're asking for WUs that are likely to be unstable. Remove that setting.

Posted: **Sat Jun 09, 2012 8:05 pm**

The only reason I use that setting is because my GTX 680 won't fold on the V2 client without it. I have the most up to date GPUs.txt file and still it won't fold without that setting. Any advice along those lines?

Posted: **Sat Jun 09, 2012 8:33 pm**

7640 is a known problematic project, currently under failure testing. I.E. it is known to fail, but don't know why, so they study it.

That is a risk beta testers are willing to take. Keep the beta flag, because folding some WUs is better than none at all. Just understand it won't be smooth sailing because that hardware is so new, as are the work units that go with it.

The other option is to finish with that client, and start it up again later when these projects are more stable and are released without the beta requirement. But that could be days, even weeks. Your choice.

Posted: **Mon Jun 11, 2012 9:51 am**

I have GTX 680. I haven't had any problems with it (running Beta switch) until now with project 7640. It doesn't fold at all.
Here is log:

Code: Select all

*********************** Log Started 2012-06-11T09:38:54Z ***********************
09:38:54:WU01:FS01:Connecting to assign-GPU.stanford.edu:80
09:38:55:WU01:FS01:News: Welcome to Folding@Home
09:38:55:WU01:FS01:Assigned to work server 171.64.65.93
09:38:55:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:"GK104 [Geforce GTX680]" from 171.64.65.93
09:38:55:WU01:FS01:Connecting to 171.64.65.93:8080
09:38:56:WU01:FS01:Downloading 536.36KiB
09:38:58:WU01:FS01:Download complete
09:38:58:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:OK project:7640 run:398 clone:0 gen:25 core:0x15 unit:0x000000250a3b1e814f32c80c270130c1
09:38:58:WU01:FS01:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_15.fah
09:38:58:WU01:FS01:Connecting to www.stanford.edu:80
09:38:59:WU01:FS01:FahCore 15: Downloading 1.88MiB
09:39:05:WU01:FS01:FahCore 15: 46.65%
09:39:12:WU01:FS01:FahCore 15: 76.64%
09:39:17:WU01:FS01:FahCore 15: Download complete
09:39:17:WU01:FS01:Valid core signature
09:39:17:WARNING:WU01:FS01:FahCore has not changed since last download, aborting core update
09:39:17:WU01:FS01:Starting
09:39:17:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -version 701 -lifeline 3388 -checkpoint 15 -gpu 0
09:39:17:WU01:FS01:Started FahCore on PID 5624
09:39:17:WU01:FS01:Core PID:5636
09:39:17:WU01:FS01:FahCore 0x15 started
09:39:18:WU01:FS01:0x15:
09:39:18:WU01:FS01:0x15:*------------------------------*
09:39:18:WU01:FS01:0x15:Folding@Home GPU Core
09:39:18:WU01:FS01:0x15:Version                2.25 (Wed May 9 17:03:01 EDT 2012)
09:39:18:WU01:FS01:0x15:Build host             AmoebaRemote
09:39:18:WU01:FS01:0x15:Board Type             NVIDIA/CUDA
09:39:18:WU01:FS01:0x15:Core                   15
09:39:18:WU01:FS01:0x15:
09:39:18:WU01:FS01:0x15:Window's signal control handler registered.
09:39:18:WU01:FS01:0x15:Preparing to commence simulation
09:39:18:WU01:FS01:0x15:- Looking at optimizations...
09:39:18:WU01:FS01:0x15:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
09:39:18:WU01:FS01:0x15:- Created dyn
09:39:18:WU01:FS01:0x15:- Files status OK
09:39:18:WU01:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
09:39:18:WU01:FS01:0x15:- Expanded 548725 -> 891316 (decompressed 162.4 percent)
09:39:18:WU01:FS01:0x15:Called DecompressByteArray: compressed_data_size=548725 data_size=891316, decompressed_data_size=891316 diff=0
09:39:18:WU01:FS01:0x15:- Digital signature verified
09:39:18:WU01:FS01:0x15:
09:39:18:WU01:FS01:0x15:Project: 7640 (Run 398, Clone 0, Gen 25)
09:39:18:WU01:FS01:0x15:
09:39:18:WU01:FS01:0x15:Assembly optimizations on if available.
09:39:18:WU01:FS01:0x15:Entering M.D.
09:39:19:WU01:FS01:0x15:Tpr hash 01/wudata_01.tpr:  965027553 4058581739 1497874182 2665658029 324592238
09:39:19:WU01:FS01:0x15:GPU device id=0
09:39:19:WU01:FS01:0x15:Working on Generated by trjconv : 21521 p3064_lambda5_2003 t= 3400.00024 in water
09:39:19:WU01:FS01:0x15:Client config unavailable.
09:39:20:WU01:FS01:0x15:Starting GUI Server
09:40:47:WU01:FS01:0x15:Finished fah_main status=56
09:40:47:WU01:FS01:0x15:mdrun_gpu returned 56
09:40:47:WU01:FS01:0x15:Self-test failure
09:40:47:WU01:FS01:0x15:
09:40:47:WU01:FS01:0x15:Folding@home Core Shutdown: UNSTABLE_MACHINE
09:40:47:WU01:FS01:FahCore returned: UNSTABLE_MACHINE (122 = 0x7a)
09:40:48:WU01:FS01:Starting
09:40:48:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -version 701 -lifeline 3388 -checkpoint 15 -gpu 0
09:40:48:WU01:FS01:Started FahCore on PID 6076
09:40:48:WU01:FS01:Core PID:1672
09:40:48:WU01:FS01:FahCore 0x15 started
09:40:48:WU01:FS01:0x15:
09:40:48:WU01:FS01:0x15:*------------------------------*
09:40:48:WU01:FS01:0x15:Folding@Home GPU Core
09:40:48:WU01:FS01:0x15:Version                2.25 (Wed May 9 17:03:01 EDT 2012)
09:40:48:WU01:FS01:0x15:Build host             AmoebaRemote
09:40:48:WU01:FS01:0x15:Board Type             NVIDIA/CUDA
09:40:48:WU01:FS01:0x15:Core                   15
09:40:48:WU01:FS01:0x15:
09:40:48:WU01:FS01:0x15:Window's signal control handler registered.
09:40:48:WU01:FS01:0x15:Preparing to commence simulation
09:40:48:WU01:FS01:0x15:- Looking at optimizations...
09:40:48:WU01:FS01:0x15:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
09:40:48:WU01:FS01:0x15:- Created dyn
09:40:48:WU01:FS01:0x15:- Files status OK
09:40:48:WU01:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
09:40:48:WU01:FS01:0x15:- Expanded 548725 -> 891316 (decompressed 162.4 percent)
09:40:48:WU01:FS01:0x15:Called DecompressByteArray: compressed_data_size=548725 data_size=891316, decompressed_data_size=891316 diff=0
09:40:48:WU01:FS01:0x15:- Digital signature verified
09:40:48:WU01:FS01:0x15:
09:40:48:WU01:FS01:0x15:Project: 7640 (Run 398, Clone 0, Gen 25)
09:40:48:WU01:FS01:0x15:
09:40:48:WU01:FS01:0x15:Assembly optimizations on if available.
09:40:48:WU01:FS01:0x15:Entering M.D.
09:40:50:WU01:FS01:0x15:Tpr hash 01/wudata_01.tpr:  965027553 4058581739 1497874182 2665658029 324592238
09:40:50:WU01:FS01:0x15:GPU device id=0
09:40:50:WU01:FS01:0x15:Working on Generated by trjconv : 21521 p3064_lambda5_2003 t= 3400.00024 in water
09:40:50:WU01:FS01:0x15:Client config unavailable.
09:40:50:WU01:FS01:0x15:Starting GUI Server
09:42:17:WU01:FS01:0x15:Finished fah_main status=56
09:42:17:WU01:FS01:0x15:mdrun_gpu returned 56
09:42:17:WU01:FS01:0x15:Self-test failure
09:42:17:WU01:FS01:0x15:
09:42:17:WU01:FS01:0x15:Folding@home Core Shutdown: UNSTABLE_MACHINE
09:42:18:WU01:FS01:FahCore returned: UNSTABLE_MACHINE (122 = 0x7a)
09:42:18:WU01:FS01:Starting
09:42:18:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -version 701 -lifeline 3388 -checkpoint 15 -gpu 0
09:42:18:WU01:FS01:Started FahCore on PID 3796
09:42:18:WU01:FS01:Core PID:4192
09:42:18:WU01:FS01:FahCore 0x15 started
09:42:19:WU01:FS01:0x15:
09:42:19:WU01:FS01:0x15:*------------------------------*
09:42:19:WU01:FS01:0x15:Folding@Home GPU Core
09:42:19:WU01:FS01:0x15:Version                2.25 (Wed May 9 17:03:01 EDT 2012)
09:42:19:WU01:FS01:0x15:Build host             AmoebaRemote
09:42:19:WU01:FS01:0x15:Board Type             NVIDIA/CUDA
09:42:19:WU01:FS01:0x15:Core                   15
09:42:19:WU01:FS01:0x15:
09:42:19:WU01:FS01:0x15:Window's signal control handler registered.
09:42:19:WU01:FS01:0x15:Preparing to commence simulation
09:42:19:WU01:FS01:0x15:- Looking at optimizations...
09:42:19:WU01:FS01:0x15:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
09:42:19:WU01:FS01:0x15:- Created dyn
09:42:19:WU01:FS01:0x15:- Files status OK
09:42:19:WU01:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
09:42:19:WU01:FS01:0x15:- Expanded 548725 -> 891316 (decompressed 162.4 percent)
09:42:19:WU01:FS01:0x15:Called DecompressByteArray: compressed_data_size=548725 data_size=891316, decompressed_data_size=891316 diff=0
09:42:19:WU01:FS01:0x15:- Digital signature verified
09:42:19:WU01:FS01:0x15:
09:42:19:WU01:FS01:0x15:Project: 7640 (Run 398, Clone 0, Gen 25)
09:42:19:WU01:FS01:0x15:
09:42:19:WU01:FS01:0x15:Assembly optimizations on if available.
09:42:19:WU01:FS01:0x15:Entering M.D.
09:42:21:WU01:FS01:0x15:Tpr hash 01/wudata_01.tpr:  965027553 4058581739 1497874182 2665658029 324592238
09:42:21:WU01:FS01:0x15:GPU device id=0
09:42:21:WU01:FS01:0x15:Working on Generated by trjconv : 21521 p3064_lambda5_2003 t= 3400.00024 in water
09:42:21:WU01:FS01:0x15:Client config unavailable.
09:42:21:WU01:FS01:0x15:Starting GUI Server
09:43:43:WU01:FS01:0x15:Finished fah_main status=56
09:43:43:WU01:FS01:0x15:mdrun_gpu returned 56
09:43:43:WU01:FS01:0x15:Self-test failure
09:43:43:WU01:FS01:0x15:
09:43:43:WU01:FS01:0x15:Folding@home Core Shutdown: UNSTABLE_MACHINE
09:43:43:WU01:FS01:FahCore returned: UNSTABLE_MACHINE (122 = 0x7a)

Posted: **Mon Jun 11, 2012 11:26 am**

Since 7640 doesn't currently fold, what advice can be taken? How get a different project? Would setting different switches help?

Posted: **Mon Jun 11, 2012 6:36 pm**

The purpose of the beta switch is to test WUs that are unstable so they can be fixed. You have received an unstable according to your request to get them. The only way to get help with beta WUs is to join the beta team. Remove the flag and wait until there are supported WUs for your hardware.

viewtopic.php?f=66&t=18031

Folding Forum

Project: 7600 (Run 3, Clone 3, Gen 38) - Bad WU

Project: 7600 (Run 3, Clone 3, Gen 38) - Bad WU

Re: Project: 7600 (Run 3, Clone 3, Gen 38) - Bad WU

Re: Project: 7600 (Run 3, Clone 3, Gen 38) - Bad WU

Re: Project: 7600 (Run 3, Clone 3, Gen 38) - Bad WU

Re: Project: 7600 (Run 3, Clone 3, Gen 38) - Bad WU

Re: Project: 7600 (Run 3, Clone 3, Gen 38) - Bad WU

Re: Project: 7600 (Run 3, Clone 3, Gen 38) - Bad WU

Re: Project: 7600 (Run 3, Clone 3, Gen 38) - Bad WU

Re: Project: 7600 (Run 3, Clone 3, Gen 38) - Bad WU

Re: Project: 7600 (Run 3, Clone 3, Gen 38) - Bad WU