Page 1 of 2
Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 10:53 am
by superkingkong
Hi guys,
I've been folding a bit with the old client, but new to client 7 and gpu folding.
I've just assembled a new rig to do folding. Intel i7 2700k with 2 x MSI N560GTX-Ti 448 Twin Frozr III PE/OC.
I've downloaded the latest nvidia drivers from nvidia website. the latest version : 296.10
i'm running win7 64 bit
I've downloaded FAh client 7.1.52
During installation, it selected the GPU and SMP for me. Selected default values for all.
After starting, SMP 8 started folding, but GPU 0 and GPU 1 were showing Ready.
After a while, it became red (GPU 0 and 1).
A check on the log, it keeps crashing.
Code: Select all
22:25:57:WU00:FS00:0x15:*------------------------------*
22:25:57:WU00:FS00:0x15:Folding@Home GPU Core
22:25:57:WU00:FS00:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
22:25:57:WU00:FS00:0x15:Build host SimbiosNvdWin7
22:25:57:WU00:FS00:0x15:Board Type NVIDIA/CUDA
22:25:57:WU00:FS00:0x15:Core 15
22:25:57:WU00:FS00:0x15:
22:25:57:WU00:FS00:0x15:Window's signal control handler registered.
22:25:57:WU00:FS00:0x15:Preparing to commence simulation
22:25:57:WU00:FS00:0x15:- Ensuring status. Please wait.
22:26:06:WU00:FS00:0x15:- Looking at optimizations...
22:26:06:WU00:FS00:0x15:- Working with standard loops on this execution.
22:26:06:WU00:FS00:0x15:- Previous termination of core was improper.
22:26:06:WU00:FS00:0x15:- Going to use standard loops.
22:26:06:WU00:FS00:0x15:- Files status OK
22:26:06:WU00:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
22:26:06:WU00:FS00:0x15:- Expanded 119412 -> 542246 (decompressed 454.0 percent)
22:26:06:WU00:FS00:0x15:Called DecompressByteArray: compressed_data_size=119412 data_size=542246, decompressed_data_size=542246 diff=0
22:26:06:WU00:FS00:0x15:- Digital signature verified
22:26:06:WU00:FS00:0x15:
22:26:06:WU00:FS00:0x15:Project: 8032 (Run 3, Clone 120, Gen 5)
22:26:06:WU00:FS00:0x15:
22:26:06:WU00:FS00:0x15:Entering M.D.
22:26:08:WU00:FS00:0x15:Tpr hash 00/wudata_01.tpr: 1473944503 576744107 2615256538 1968340919 2046139132
22:26:08:WU00:FS00:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
22:26:08:WU00:FS00:0x15:Working on Protein
22:26:08:WU00:FS00:0x15:Client config unavailable.
22:26:09:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
22:26:09:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
22:28:34:WU00:FS00:Starting
22:28:34:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 00 -suffix 01 -version 701 -lifeline 1708 -checkpoint 15 -gpu 0 -service
22:28:34:WU00:FS00:Started FahCore on PID 3736
22:28:34:WU00:FS00:Core PID:1328
22:28:34:WU00:FS00:FahCore 0x15 started
22:28:34:WU00:FS00:0x15:
22:28:34:WU00:FS00:0x15:*------------------------------*
22:28:34:WU00:FS00:0x15:Folding@Home GPU Core
22:28:34:WU00:FS00:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
22:28:34:WU00:FS00:0x15:Build host SimbiosNvdWin7
22:28:34:WU00:FS00:0x15:Board Type NVIDIA/CUDA
22:28:34:WU00:FS00:0x15:Core 15
22:28:34:WU00:FS00:0x15:
22:28:34:WU00:FS00:0x15:Window's signal control handler registered.
22:28:34:WU00:FS00:0x15:Preparing to commence simulation
22:28:34:WU00:FS00:0x15:- Ensuring status. Please wait.
22:28:43:WU00:FS00:0x15:- Looking at optimizations...
22:28:43:WU00:FS00:0x15:- Working with standard loops on this execution.
22:28:43:WU00:FS00:0x15:- Previous termination of core was improper.
22:28:43:WU00:FS00:0x15:- Going to use standard loops.
22:28:43:WU00:FS00:0x15:- Files status OK
22:28:43:WU00:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
22:28:43:WU00:FS00:0x15:- Expanded 119412 -> 542246 (decompressed 454.0 percent)
22:28:43:WU00:FS00:0x15:Called DecompressByteArray: compressed_data_size=119412 data_size=542246, decompressed_data_size=542246 diff=0
22:28:43:WU00:FS00:0x15:- Digital signature verified
22:28:43:WU00:FS00:0x15:
22:28:43:WU00:FS00:0x15:Project: 8032 (Run 3, Clone 120, Gen 5)
22:28:43:WU00:FS00:0x15:
22:28:43:WU00:FS00:0x15:Entering M.D.
22:28:45:WU00:FS00:0x15:Tpr hash 00/wudata_01.tpr: 1473944503 576744107 2615256538 1968340919 2046139132
22:28:45:WU00:FS00:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
22:28:46:WU00:FS00:0x15:Working on Protein
22:28:46:WU00:FS00:0x15:Client config unavailable.
22:28:46:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
22:28:46:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
22:28:46:WARNING:WU00:FS00:Too many errors, failing
22:28:46:WU00:FS00:Sending unit results: id:00 state:SEND error:FAILED project:8032 run:3 clone:120 gen:5 core:0x15 unit:0x000000076953ee2e4f3c4a87b2e93a1b
22:28:46:WU00:FS00:Connecting to 171.67.108.142:8080
22:28:46:WU00:FS00:Server responded WORK_QUIT (404)
22:28:46:WARNING:WU00:FS00:Server did not like results, dumping
22:28:46:WU00:FS00:Cleaning up
Appreciate if anyone could please help, thank you.
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 4:14 pm
by ChelseaOilman
superkingkong wrote:I've downloaded the latest nvidia drivers from nvidia website. the latest version : 296.10
I suspect that's your issue. Lately some of the newer drivers haven't been working well with F@H.
Read this thread:
Nvidia 296.10 WHQL drivers fail
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 4:25 pm
by 7im
Is the GPU overclocked? Try running at stock speeds and see if that works. Then work your way up to a stable speed.
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 5:24 pm
by Fahrenheit451
In another thread someone (I believe it was Bruce) gave a hint that worked for me:
Go to the energy saving options of Win 7 and set the value for "turn monitor off" to "never" (Please note that I don't know the exact description in English as I have a German Win 7). It's not nice but it seems currently the only solution to use current nvidia WHQL drivers for folding. The new energy saving mode is called "turn your monitor manually off"
You don't need to downclock your GPU. My 560 Ti is factory overclocked and it works.
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 6:32 pm
by superkingkong
hmm.. strange ... i've turned off the "auto monitor off" feature. still it fails. I've tried downgrading the drivers to 295.73, but it fails to. I tried downgrading it again to 285.62 but it says that the driver is not compatible with my card. So, i'm stuck in 295.73.
Yes, my card is factory pre-OC. I don't know how to set it back to original.
The GPU folding starts from the beginning after i installed win7, drivers and folding client. so, i doubt it's the temp. I checked it, it was about 31C on one card, and the other was 39C.
Any more suggestions?
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 6:39 pm
by 7im
Need to see the *** System *** section of the log file...
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 7:15 pm
by superkingkong
what do you mean by system section of the log file?
is it this one? i got it in the log directory. (This is one of the few logs)
Thanks for helping.
Code: Select all
*********************** Log Started 2012-03-23T00:31:16Z ***********************
00:31:16:************************* Folding@home Client *************************
00:31:16: Website: http://folding.stanford.edu/
00:31:16: Copyright: (c) 2009-2012 Stanford University
00:31:16: Author: Joseph Coffland <joseph@cauldrondevelopment.com>
00:31:16: Args:
00:31:16: Config: C:/ProgramData/FAHClient/config.xml
00:31:16:******************************** Build ********************************
00:31:16: Version: 7.1.52
00:31:16: Date: Mar 20 2012
00:31:16: Time: 19:37:42
00:31:16: SVN Rev: 3515
00:31:16: Branch: fah/trunk/client
00:31:16: Compiler: Intel(R) C++ MSVC 1500 mode 1200
00:31:16: Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
00:31:16: /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT
00:31:16: Platform: win32 XP
00:31:16: Bits: 32
00:31:16: Mode: Release
00:31:16:******************************* System ********************************
00:31:16: CPU: Intel(R) Core(TM) i7-2700K CPU @ 3.50GHz
00:31:16: CPU ID: GenuineIntel Family 6 Model 42 Stepping 7
00:31:16: CPUs: 8
00:31:16: Memory: 15.97GiB
00:31:16: Free Memory: 14.70GiB
00:31:16: Threads: WINDOWS_THREADS
00:31:16: On Battery: false
00:31:16: UTC offset: -4
00:31:16: PID: 1528
00:31:16: CWD: C:/Windows/system32
00:31:16: OS: Windows 7 Ultimate
00:31:16: OS Arch: AMD64
00:31:16: GPUs: 2
00:31:16: GPU 0: NVIDIA:1 GF110 [Geforce GTX 560 Ti]
00:31:16: GPU 1: NVIDIA:1 GF110 [Geforce GTX 560 Ti]
00:31:16: CUDA: Not detected
00:31:16:Win32 Service: true
00:31:16:***********************************************************************
00:31:16:<config>
00:31:16: <!-- Folding Slot Configuration -->
00:31:16: <gpu v='true'/>
00:31:16:
00:31:16: <!-- User Information -->
00:31:16: <passkey v='********************************'/>
00:31:16: <team v='2999'/>
00:31:16: <user v='SuperKingKong'/>
00:31:16:
00:31:16: <!-- Folding Slots -->
00:31:16:</config>
00:31:16:Trying to access database...
00:31:16:Successfully acquired database lock
00:31:16:Enabled folding slot 00: READY gpu:0:"GF110 [Geforce GTX 560 Ti]"
00:31:16:Enabled folding slot 01: READY gpu:1:"GF110 [Geforce GTX 560 Ti]"
00:31:16:Enabled folding slot 02: READY smp:8
00:31:16:WU02:FS02:Starting
00:31:16:WU02:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 02 -suffix 01 -version 701 -lifeline 1528 -checkpoint 15 -np 8 -service
00:31:16:WU02:FS02:Started FahCore on PID 1808
00:31:16:WU02:FS02:Core PID:1968
00:31:16:WU02:FS02:FahCore 0xa4 started
00:31:16:WU00:FS00:Starting
00:31:16:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 00 -suffix 01 -version 701 -lifeline 1528 -checkpoint 15 -gpu 0 -service
00:31:16:WU00:FS00:Started FahCore on PID 1992
00:31:16:WU00:FS00:Core PID:2020
00:31:16:WU00:FS00:FahCore 0x15 started
00:31:16:WU01:FS01:Starting
00:31:16:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -version 701 -lifeline 1528 -checkpoint 15 -gpu 1 -service
00:31:16:WU01:FS01:Started FahCore on PID 2036
00:31:16:WU01:FS01:Core PID:1280
00:31:16:WU01:FS01:FahCore 0x15 started
00:31:16:WU02:FS02:0xa4:
00:31:16:WU02:FS02:0xa4:*------------------------------*
00:31:16:WU02:FS02:0xa4:Folding@Home Gromacs GB Core
00:31:16:WU02:FS02:0xa4:Version 2.27 (Dec. 15, 2010)
00:31:16:WU02:FS02:0xa4:
00:31:16:WU02:FS02:0xa4:Preparing to commence simulation
00:31:16:WU02:FS02:0xa4:- Looking at optimizations...
00:31:16:WU02:FS02:0xa4:- Files status OK
00:31:16:WU02:FS02:0xa4:- Expanded 339652 -> 644556 (decompressed 189.7 percent)
00:31:16:WU02:FS02:0xa4:Called DecompressByteArray: compressed_data_size=339652 data_size=644556, decompressed_data_size=644556 diff=0
00:31:16:WU02:FS02:0xa4:- Digital signature verified
00:31:16:WU02:FS02:0xa4:
00:31:16:WU02:FS02:0xa4:Project: 7611 (Run 1, Clone 0, Gen 155)
00:31:16:WU02:FS02:0xa4:
00:31:16:WU02:FS02:0xa4:Assembly optimizations on if available.
00:31:16:WU02:FS02:0xa4:Entering M.D.
00:31:16:WU00:FS00:0x15:
00:31:16:WU00:FS00:0x15:*------------------------------*
00:31:16:WU00:FS00:0x15:Folding@Home GPU Core
00:31:16:WU00:FS00:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
00:31:16:WU00:FS00:0x15:Build host SimbiosNvdWin7
00:31:16:WU00:FS00:0x15:Board Type NVIDIA/CUDA
00:31:16:WU00:FS00:0x15:Core 15
00:31:16:WU00:FS00:0x15:
00:31:16:WU00:FS00:0x15:Window's signal control handler registered.
00:31:16:WU00:FS00:0x15:Preparing to commence simulation
00:31:16:WU00:FS00:0x15:- Ensuring status. Please wait.
00:31:16:WU01:FS01:0x15:
00:31:16:WU01:FS01:0x15:*------------------------------*
00:31:16:WU01:FS01:0x15:Folding@Home GPU Core
00:31:16:WU01:FS01:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
00:31:16:WU01:FS01:0x15:Build host SimbiosNvdWin7
00:31:16:WU01:FS01:0x15:Board Type NVIDIA/CUDA
00:31:16:WU01:FS01:0x15:Core 15
00:31:16:WU01:FS01:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
00:31:16:WU01:FS01:0x15:
00:31:16:WU01:FS01:0x15:Window's signal control handler registered.
00:31:16:WU01:FS01:0x15:Preparing to commence simulation
00:31:16:WU01:FS01:0x15:- Ensuring status. Please wait.
00:31:22:WU02:FS02:0xa4:Using Gromacs checkpoints
00:31:22:WU02:FS02:0xa4:Mapping NT from 8 to 8
00:31:22:WU02:FS02:0xa4:Resuming from checkpoint
00:31:22:WU02:FS02:0xa4:Verified 02/wudata_01.log
00:31:22:WU02:FS02:0xa4:Verified 02/wudata_01.trr
00:31:22:WU02:FS02:0xa4:Verified 02/wudata_01.xtc
00:31:22:WU02:FS02:0xa4:Verified 02/wudata_01.edr
00:31:22:WU02:FS02:0xa4:Completed 437500 out of 2000000 steps (21%)
00:31:25:WU00:FS00:0x15:- Looking at optimizations...
00:31:25:WU01:FS01:0x15:- Looking at optimizations...
00:31:25:WU00:FS00:0x15:- Working with standard loops on this execution.
00:31:25:WU01:FS01:0x15:- Working with standard loops on this execution.
00:31:25:WU00:FS00:0x15:- Previous termination of core was improper.
00:31:25:WU01:FS01:0x15:- Previous termination of core was improper.
00:31:25:WU00:FS00:0x15:- Going to use standard loops.
00:31:25:WU01:FS01:0x15:- Going to use standard loops.
00:31:25:WU00:FS00:0x15:- Files status OK
00:31:25:WU01:FS01:0x15:- Files status OK
00:31:25:WU00:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
00:31:25:WU01:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
00:31:25:WU00:FS00:0x15:- Expanded 119993 -> 542246 (decompressed 451.8 percent)
00:31:25:WU01:FS01:0x15:- Expanded 120605 -> 542246 (decompressed 449.6 percent)
00:31:25:WU00:FS00:0x15:Called DecompressByteArray: compressed_data_size=119993 data_size=542246, decompressed_data_size=542246 diff=0
00:31:25:WU01:FS01:0x15:Called DecompressByteArray: compressed_data_size=120605 data_size=542246, decompressed_data_size=542246 diff=0
00:31:25:WU00:FS00:0x15:- Digital signature verified
00:31:25:WU01:FS01:0x15:- Digital signature verified
00:31:25:WU00:FS00:0x15:
00:31:25:WU01:FS01:0x15:
00:31:25:WU00:FS00:0x15:Project: 8032 (Run 18, Clone 83, Gen 17)
00:31:25:WU01:FS01:0x15:Project: 8032 (Run 17, Clone 38, Gen 6)
00:31:25:WU00:FS00:0x15:
00:31:25:WU01:FS01:0x15:
00:31:25:WU00:FS00:0x15:Entering M.D.
00:31:25:WU01:FS01:0x15:Entering M.D.
00:31:27:WU00:FS00:0x15:Tpr hash 00/wudata_01.tpr: 409408571 1001991768 2464150656 2049992053 2923756049
00:31:27:WU00:FS00:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
00:31:27:WU00:FS00:0x15:Working on Protein
00:31:27:WU00:FS00:0x15:Client config unavailable.
00:31:27:WU01:FS01:0x15:Tpr hash 01/wudata_01.tpr: 3393233134 3637522672 940929845 2327697688 730391902
00:31:27:WU01:FS01:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
00:31:27:WU01:FS01:0x15:Working on Protein
00:31:27:WU01:FS01:0x15:Client config unavailable.
00:31:27:WU01:FS01:0x15:Starting GUI Server
00:31:28:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
00:31:28:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
00:31:28:WU01:FS01:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
00:31:28:WARNING:WU01:FS01:FahCore returned an unknown error code which probably indicates that it crashed
00:31:28:WU00:FS00:Starting
00:31:28:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 00 -suffix 01 -version 701 -lifeline 1528 -checkpoint 15 -gpu 0 -service
00:31:28:WU00:FS00:Started FahCore on PID 3808
00:31:28:WU00:FS00:Core PID:3836
00:31:28:WU00:FS00:FahCore 0x15 started
00:31:28:WU01:FS01:Starting
00:31:28:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -version 701 -lifeline 1528 -checkpoint 15 -gpu 1 -service
00:31:28:WU01:FS01:Started FahCore on PID 3848
00:31:28:WU01:FS01:Core PID:3900
00:31:28:WU01:FS01:FahCore 0x15 started
00:31:28:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1
00:31:29:WU00:FS00:0x15:
00:31:29:WU00:FS00:0x15:*------------------------------*
00:31:29:WU00:FS00:0x15:Folding@Home GPU Core
00:31:29:WU00:FS00:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
00:31:29:WU00:FS00:0x15:Build host SimbiosNvdWin7
00:31:29:WU00:FS00:0x15:Board Type NVIDIA/CUDA
00:31:29:WU00:FS00:0x15:Core 15
00:31:29:WU00:FS00:0x15:
00:31:29:WU00:FS00:0x15:Window's signal control handler registered.
00:31:29:WU00:FS00:0x15:Preparing to commence simulation
00:31:29:WU00:FS00:0x15:- Ensuring status. Please wait.
00:31:29:WU01:FS01:0x15:
00:31:29:WU01:FS01:0x15:*------------------------------*
00:31:29:WU01:FS01:0x15:Folding@Home GPU Core
00:31:29:WU01:FS01:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
00:31:29:WU01:FS01:0x15:Build host SimbiosNvdWin7
00:31:29:WU01:FS01:0x15:Board Type NVIDIA/CUDA
00:31:29:WU01:FS01:0x15:Core 15
00:31:29:WU01:FS01:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
00:31:29:WU01:FS01:0x15:
00:31:29:WU01:FS01:0x15:Window's signal control handler registered.
00:31:29:WU01:FS01:0x15:Preparing to commence simulation
00:31:29:WU01:FS01:0x15:- Ensuring status. Please wait.
00:31:30:Server connection id=2 on 0.0.0.0:36330 from 127.0.0.1
00:31:30:Server connection id=1 ended
00:31:38:WU00:FS00:0x15:- Looking at optimizations...
00:31:38:WU00:FS00:0x15:- Working with standard loops on this execution.
00:31:38:WU00:FS00:0x15:- Previous termination of core was improper.
00:31:38:WU00:FS00:0x15:- Going to use standard loops.
00:31:38:WU00:FS00:0x15:- Files status OK
00:31:38:WU00:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
00:31:38:WU00:FS00:0x15:- Expanded 119993 -> 542246 (decompressed 451.8 percent)
00:31:38:WU00:FS00:0x15:Called DecompressByteArray: compressed_data_size=119993 data_size=542246, decompressed_data_size=542246 diff=0
00:31:38:WU00:FS00:0x15:- Digital signature verified
00:31:38:WU00:FS00:0x15:
00:31:38:WU00:FS00:0x15:Project: 8032 (Run 18, Clone 83, Gen 17)
00:31:38:WU00:FS00:0x15:
00:31:38:WU00:FS00:0x15:Entering M.D.
00:31:39:WU01:FS01:0x15:- Looking at optimizations...
00:31:39:WU01:FS01:0x15:- Working with standard loops on this execution.
00:31:39:WU01:FS01:0x15:- Previous termination of core was improper.
00:31:39:WU01:FS01:0x15:- Going to use standard loops.
00:31:39:WU01:FS01:0x15:- Files status OK
00:31:39:WU01:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
00:31:39:WU01:FS01:0x15:- Expanded 120605 -> 542246 (decompressed 449.6 percent)
00:31:39:WU01:FS01:0x15:Called DecompressByteArray: compressed_data_size=120605 data_size=542246, decompressed_data_size=542246 diff=0
00:31:39:WU01:FS01:0x15:- Digital signature verified
00:31:39:WU01:FS01:0x15:
00:31:39:WU01:FS01:0x15:Project: 8032 (Run 17, Clone 38, Gen 6)
00:31:39:WU01:FS01:0x15:
00:31:39:WU01:FS01:0x15:Entering M.D.
00:31:40:WU00:FS00:0x15:Tpr hash 00/wudata_01.tpr: 409408571 1001991768 2464150656 2049992053 2923756049
00:31:40:WU00:FS00:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
00:31:40:WU00:FS00:0x15:Working on Protein
00:31:40:WU00:FS00:0x15:Client config unavailable.
00:31:40:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
00:31:40:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
00:31:40:WU01:FS01:0x15:Tpr hash 01/wudata_01.tpr: 3393233134 3637522672 940929845 2327697688 730391902
00:31:40:WU01:FS01:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
00:31:41:WU01:FS01:0x15:Working on Protein
00:31:41:WU01:FS01:0x15:Client config unavailable.
00:31:41:WU01:FS01:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
00:31:41:WARNING:WU01:FS01:FahCore returned an unknown error code which probably indicates that it crashed
00:32:05:WU02:FS02:0xa4:Completed 440000 out of 2000000 steps (22%)
00:32:28:WU00:FS00:Starting
00:32:28:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 00 -suffix 01 -version 701 -lifeline 1528 -checkpoint 15 -gpu 0 -service
00:32:28:WU00:FS00:Started FahCore on PID 4308
00:32:28:WU00:FS00:Core PID:4112
00:32:28:WU00:FS00:FahCore 0x15 started
00:32:28:WU01:FS01:Starting
00:32:28:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -version 701 -lifeline 1528 -checkpoint 15 -gpu 1 -service
00:32:28:WU01:FS01:Started FahCore on PID 4108
00:32:28:WU01:FS01:Core PID:3812
00:32:28:WU01:FS01:FahCore 0x15 started
00:32:29:WU00:FS00:0x15:
00:32:29:WU00:FS00:0x15:*------------------------------*
00:32:29:WU00:FS00:0x15:Folding@Home GPU Core
00:32:29:WU00:FS00:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
00:32:29:WU00:FS00:0x15:Build host SimbiosNvdWin7
00:32:29:WU00:FS00:0x15:Board Type NVIDIA/CUDA
00:32:29:WU00:FS00:0x15:Core 15
00:32:29:WU00:FS00:0x15:
00:32:29:WU00:FS00:0x15:Window's signal control handler registered.
00:32:29:WU00:FS00:0x15:Preparing to commence simulation
00:32:29:WU00:FS00:0x15:- Ensuring status. Please wait.
00:32:29:WU01:FS01:0x15:
00:32:29:WU01:FS01:0x15:*------------------------------*
00:32:29:WU01:FS01:0x15:Folding@Home GPU Core
00:32:29:WU01:FS01:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
00:32:29:WU01:FS01:0x15:Build host SimbiosNvdWin7
00:32:29:WU01:FS01:0x15:Board Type NVIDIA/CUDA
00:32:29:WU01:FS01:0x15:Core 15
00:32:29:WU01:FS01:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
00:32:29:WU01:FS01:0x15:
00:32:29:WU01:FS01:0x15:Window's signal control handler registered.
00:32:29:WU01:FS01:0x15:Preparing to commence simulation
00:32:29:WU01:FS01:0x15:- Ensuring status. Please wait.
00:32:38:WU00:FS00:0x15:- Looking at optimizations...
00:32:38:WU01:FS01:0x15:- Looking at optimizations...
00:32:38:WU00:FS00:0x15:- Working with standard loops on this execution.
00:32:38:WU01:FS01:0x15:- Working with standard loops on this execution.
00:32:38:WU00:FS00:0x15:- Previous termination of core was improper.
00:32:38:WU01:FS01:0x15:- Previous termination of core was improper.
00:32:38:WU00:FS00:0x15:- Going to use standard loops.
00:32:38:WU01:FS01:0x15:- Going to use standard loops.
00:32:38:WU00:FS00:0x15:- Files status OK
00:32:38:WU01:FS01:0x15:- Files status OK
00:32:38:WU00:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
00:32:38:WU01:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
00:32:38:WU00:FS00:0x15:- Expanded 119993 -> 542246 (decompressed 451.8 percent)
00:32:38:WU00:FS00:0x15:Called DecompressByteArray: compressed_data_size=119993 data_size=542246, decompressed_data_size=542246 diff=0
00:32:38:WU00:FS00:0x15:- Digital signature verified
00:32:38:WU00:FS00:0x15:
00:32:38:WU00:FS00:0x15:Project: 8032 (Run 18, Clone 83, Gen 17)
00:32:38:WU00:FS00:0x15:
00:32:38:WU00:FS00:0x15:Entering M.D.
00:32:38:WU01:FS01:0x15:- Expanded 120605 -> 542246 (decompressed 449.6 percent)
00:32:38:WU01:FS01:0x15:Called DecompressByteArray: compressed_data_size=120605 data_size=542246, decompressed_data_size=542246 diff=0
00:32:38:WU01:FS01:0x15:- Digital signature verified
00:32:38:WU01:FS01:0x15:
00:32:38:WU01:FS01:0x15:Project: 8032 (Run 17, Clone 38, Gen 6)
00:32:38:WU01:FS01:0x15:
00:32:38:WU01:FS01:0x15:Entering M.D.
00:32:40:WU00:FS00:0x15:Tpr hash 00/wudata_01.tpr: 409408571 1001991768 2464150656 2049992053 2923756049
00:32:40:WU01:FS01:0x15:Tpr hash 01/wudata_01.tpr: 3393233134 3637522672 940929845 2327697688 730391902
00:32:40:WU00:FS00:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
00:32:40:WU01:FS01:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
00:32:40:WU00:FS00:0x15:Working on Protein
00:32:40:WU01:FS01:0x15:Working on Protein
00:32:40:WU00:FS00:0x15:Client config unavailable.
00:32:40:WU01:FS01:0x15:Client config unavailable.
00:32:40:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
00:32:40:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
00:32:40:WARNING:WU00:FS00:Too many errors, failing
00:32:40:WU00:FS00:Sending unit results: id:00 state:SEND error:FAILED project:8032 run:18 clone:83 gen:17 core:0x15 unit:0x000000176953ee2e4f3c4e09c948e816
00:32:40:WU00:FS00:Connecting to 171.67.108.142:8080
00:32:41:WU01:FS01:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
00:32:41:WARNING:WU01:FS01:FahCore returned an unknown error code which probably indicates that it crashed
00:32:41:WARNING:WU01:FS01:Too many errors, failing
00:32:41:WU01:FS01:Sending unit results: id:01 state:SEND error:FAILED project:8032 run:17 clone:38 gen:6 core:0x15 unit:0x000000076953ee2e4f3c4dc92855cce0
00:32:41:WU01:FS01:Connecting to 171.67.108.142:8080
00:32:41:WU03:FS00:Connecting to assign-GPU.stanford.edu:80
00:32:41:WU04:FS01:Connecting to assign-GPU.stanford.edu:80
00:32:41:WU03:FS00:News: Welcome to Folding@Home
00:32:41:WU03:FS00:Assigned to work server 171.67.108.142
00:32:41:WU03:FS00:Requesting new work unit for slot 00: READY gpu:0:"GF110 [Geforce GTX 560 Ti]" from 171.67.108.142
00:32:41:WU03:FS00:Connecting to 171.67.108.142:8080
00:32:41:WU04:FS01:News: Welcome to Folding@Home
00:32:41:WU04:FS01:Assigned to work server 171.67.108.142
00:32:41:WU04:FS01:Requesting new work unit for slot 01: READY gpu:1:"GF110 [Geforce GTX 560 Ti]" from 171.67.108.142
00:32:41:WU04:FS01:Connecting to 171.67.108.142:8080
00:32:44:WU00:FS00:Server responded WORK_QUIT (404)
00:32:44:WARNING:WU00:FS00:Server did not like results, dumping
00:32:44:WU00:FS00:Cleaning up
00:32:44:WU01:FS01:Server responded WORK_QUIT (404)
00:32:44:WARNING:WU01:FS01:Server did not like results, dumping
00:32:44:WU01:FS01:Cleaning up
00:32:45:WU03:FS00:Downloading 118.09KiB
00:32:45:WU04:FS01:Downloading 116.99KiB
00:32:45:WU04:FS01:Download complete
00:32:45:WU04:FS01:Received Unit: id:04 state:DOWNLOAD error:OK project:8032 run:7 clone:350 gen:8 core:0x15 unit:0x0000000a6953ee2e4f3c4b9bbbe6550b
00:32:45:WU04:FS01:Starting
00:32:45:WU04:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 04 -suffix 01 -version 701 -lifeline 1528 -checkpoint 15 -gpu 1 -service
00:32:45:WU04:FS01:Started FahCore on PID 4648
00:32:45:WU04:FS01:Core PID:4536
00:32:45:WU04:FS01:FahCore 0x15 started
00:32:45:WU03:FS00:Download complete
00:32:45:WU03:FS00:Received Unit: id:03 state:DOWNLOAD error:OK project:8032 run:2 clone:46 gen:18 core:0x15 unit:0x000000166953ee2e4f3c4a41ef1a698a
00:32:45:WU03:FS00:Starting
00:32:45:WU03:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 03 -suffix 01 -version 701 -lifeline 1528 -checkpoint 15 -gpu 0 -service
00:32:45:WU03:FS00:Started FahCore on PID 4524
00:32:45:WU03:FS00:Core PID:4784
00:32:45:WU03:FS00:FahCore 0x15 started
00:32:46:WU04:FS01:0x15:
00:32:46:WU04:FS01:0x15:*------------------------------*
00:32:46:WU04:FS01:0x15:Folding@Home GPU Core
00:32:46:WU04:FS01:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
00:32:46:WU04:FS01:0x15:Build host SimbiosNvdWin7
00:32:46:WU04:FS01:0x15:Board Type NVIDIA/CUDA
00:32:46:WU04:FS01:0x15:Core 15
00:32:46:WU04:FS01:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
00:32:46:WU04:FS01:0x15:
00:32:46:WU04:FS01:0x15:Window's signal control handler registered.
00:32:46:WU04:FS01:0x15:Preparing to commence simulation
00:32:46:WU04:FS01:0x15:- Looking at optimizations...
00:32:46:WU04:FS01:0x15:DeleteFrameFiles: successfully deleted file=04/wudata_01.ckp
00:32:46:WU04:FS01:0x15:- Created dyn
00:32:46:WU04:FS01:0x15:- Files status OK
00:32:46:WU04:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
00:32:46:WU04:FS01:0x15:- Expanded 119290 -> 542246 (decompressed 454.5 percent)
00:32:46:WU04:FS01:0x15:Called DecompressByteArray: compressed_data_size=119290 data_size=542246, decompressed_data_size=542246 diff=0
00:32:46:WU04:FS01:0x15:- Digital signature verified
00:32:46:WU04:FS01:0x15:
00:32:46:WU04:FS01:0x15:Project: 8032 (Run 7, Clone 350, Gen 8)
00:32:46:WU04:FS01:0x15:
00:32:46:WU04:FS01:0x15:Assembly optimizations on if available.
00:32:46:WU04:FS01:0x15:Entering M.D.
00:32:46:WU03:FS00:0x15:
00:32:46:WU03:FS00:0x15:*------------------------------*
00:32:46:WU03:FS00:0x15:Folding@Home GPU Core
00:32:46:WU03:FS00:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
00:32:46:WU03:FS00:0x15:Build host SimbiosNvdWin7
00:32:46:WU03:FS00:0x15:Board Type NVIDIA/CUDA
00:32:46:WU03:FS00:0x15:Core 15
00:32:46:WU03:FS00:0x15:
00:32:46:WU03:FS00:0x15:Window's signal control handler registered.
00:32:46:WU03:FS00:0x15:Preparing to commence simulation
00:32:46:WU03:FS00:0x15:- Looking at optimizations...
00:32:46:WU03:FS00:0x15:DeleteFrameFiles: successfully deleted file=03/wudata_01.ckp
00:32:46:WU03:FS00:0x15:- Created dyn
00:32:46:WU03:FS00:0x15:- Files status OK
00:32:46:WU03:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
00:32:46:WU03:FS00:0x15:- Expanded 120408 -> 542246 (decompressed 450.3 percent)
00:32:46:WU03:FS00:0x15:Called DecompressByteArray: compressed_data_size=120408 data_size=542246, decompressed_data_size=542246 diff=0
00:32:46:WU03:FS00:0x15:- Digital signature verified
00:32:46:WU03:FS00:0x15:
00:32:46:WU03:FS00:0x15:Project: 8032 (Run 2, Clone 46, Gen 18)
00:32:46:WU03:FS00:0x15:
00:32:46:WU03:FS00:0x15:Assembly optimizations on if available.
00:32:46:WU03:FS00:0x15:Entering M.D.
00:32:48:WU04:FS01:0x15:Tpr hash 04/wudata_01.tpr: 2298203609 3728538830 4222709523 830754964 3535003911
00:32:48:WU04:FS01:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
00:32:48:WU04:FS01:0x15:Working on Protein
00:32:48:WU04:FS01:0x15:Client config unavailable.
00:32:48:WU03:FS00:0x15:Tpr hash 03/wudata_01.tpr: 1849821225 2928293199 928366465 2535734073 3241703900
00:32:48:WU03:FS00:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
00:32:48:WU03:FS00:0x15:Working on Protein
00:32:48:WU03:FS00:0x15:Client config unavailable.
00:32:48:WU03:FS00:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
00:32:48:WARNING:WU03:FS00:FahCore returned an unknown error code which probably indicates that it crashed
00:32:48:WU04:FS01:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
00:32:48:WARNING:WU04:FS01:FahCore returned an unknown error code which probably indicates that it crashed
00:32:48:WU03:FS00:Starting
00:32:48:WU03:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 03 -suffix 01 -version 701 -lifeline 1528 -checkpoint 15 -gpu 0 -service
00:32:48:WU03:FS00:Started FahCore on PID 4756
00:32:48:WU03:FS00:Core PID:4820
00:32:48:WU03:FS00:FahCore 0x15 started
00:32:48:WU04:FS01:Starting
00:32:48:WU04:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 04 -suffix 01 -version 701 -lifeline 1528 -checkpoint 15 -gpu 1 -service
00:32:48:WU04:FS01:Started FahCore on PID 4828
00:32:48:WU04:FS01:Core PID:4740
00:32:48:WU04:FS01:FahCore 0x15 started
00:32:49:WU03:FS00:0x15:
00:32:49:WU03:FS00:0x15:*------------------------------*
00:32:49:WU03:FS00:0x15:Folding@Home GPU Core
00:32:49:WU03:FS00:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
00:32:49:WU03:FS00:0x15:Build host SimbiosNvdWin7
00:32:49:WU03:FS00:0x15:Board Type NVIDIA/CUDA
00:32:49:WU03:FS00:0x15:Core 15
00:32:49:WU03:FS00:0x15:
00:32:49:WU03:FS00:0x15:Window's signal control handler registered.
00:32:49:WU03:FS00:0x15:Preparing to commence simulation
00:32:49:WU03:FS00:0x15:- Ensuring status. Please wait.
00:32:49:WU04:FS01:0x15:
00:32:49:WU04:FS01:0x15:*------------------------------*
00:32:49:WU04:FS01:0x15:Folding@Home GPU Core
00:32:49:WU04:FS01:0x15:Version 2.22 (Thu Dec 8 17:08:05 PST 2011)
00:32:49:WU04:FS01:0x15:Build host SimbiosNvdWin7
00:32:49:WU04:FS01:0x15:Board Type NVIDIA/CUDA
00:32:49:WU04:FS01:0x15:Core 15
00:32:49:WU04:FS01:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
00:32:49:WU04:FS01:0x15:
00:32:49:WU04:FS01:0x15:Window's signal control handler registered.
00:32:49:WU04:FS01:0x15:Preparing to commence simulation
00:32:49:WU04:FS01:0x15:- Ensuring status. Please wait.
00:32:58:WU04:FS01:0x15:- Looking at optimizations...
00:32:58:WU03:FS00:0x15:- Looking at optimizations...
00:32:58:WU04:FS01:0x15:- Working with standard loops on this execution.
00:32:58:WU03:FS00:0x15:- Working with standard loops on this execution.
00:32:58:WU04:FS01:0x15:- Previous termination of core was improper.
00:32:58:WU03:FS00:0x15:- Previous termination of core was improper.
00:32:58:WU04:FS01:0x15:- Files status OK
00:32:58:WU03:FS00:0x15:- Files status OK
00:32:58:WU04:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
00:32:58:WU03:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
00:32:58:WU04:FS01:0x15:- Expanded 119290 -> 542246 (decompressed 454.5 percent)
00:32:58:WU03:FS00:0x15:- Expanded 120408 -> 542246 (decompressed 450.3 percent)
00:32:58:WU04:FS01:0x15:Called DecompressByteArray: compressed_data_size=119290 data_size=542246, decompressed_data_size=542246 diff=0
00:32:58:WU03:FS00:0x15:Called DecompressByteArray: compressed_data_size=120408 data_size=542246, decompressed_data_size=542246 diff=0
00:32:58:WU04:FS01:0x15:- Digital signature verified
00:32:58:WU03:FS00:0x15:- Digital signature verified
00:32:58:WU04:FS01:0x15:
00:32:58:WU03:FS00:0x15:
00:32:58:WU04:FS01:0x15:Project: 8032 (Run 7, Clone 350, Gen 8)
00:32:58:WU03:FS00:0x15:Project: 8032 (Run 2, Clone 46, Gen 18)
00:32:58:WU04:FS01:0x15:
00:32:58:WU03:FS00:0x15:
00:32:58:WU04:FS01:0x15:Entering M.D.
00:32:58:WU03:FS00:0x15:Entering M.D.
00:33:00:WU04:FS01:0x15:Tpr hash 04/wudata_01.tpr: 2298203609 3728538830 4222709523 830754964 3535003911
00:33:00:WU03:FS00:0x15:Tpr hash 03/wudata_01.tpr: 1849821225 2928293199 928366465 2535734073 3241703900
00:33:00:WU04:FS01:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
00:33:00:WU03:FS00:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
00:33:00:WU04:FS01:0x15:Working on Protein
00:33:00:WU03:FS00:0x15:Working on Protein
00:33:00:WU04:FS01:0x15:Client config unavailable.
00:33:00:WU03:FS00:0x15:Client config unavailable.
00:33:00:WU03:FS00:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
00:33:00:WARNING:WU03:FS00:FahCore returned an unknown error code which probably indicates that it crashed
00:33:00:WU04:FS01:FahCore returned: UNKNOWN_ENUM (-1 = 0xffffffff)
00:33:00:WARNING:WU04:FS01:FahCore returned an unknown error code which probably indicates that it crashed
00:33:45:Server connection id=2 ended
00:33:46:WARNING:Console control signal 6 on PID 1528
00:33:46:Exiting, please wait. . .
00:33:46:Service shutdown requested
00:33:46:WU02:FS02:0xa4:Received EVENT= from OS -- shutting down w/ INTERRUPTED signal; events=[CtrlC= Close= Break= Shutdown= LogOff=]
00:33:46:WU02:FS02:0xa4:Folding@home Core Shutdown: INTERRUPTED
00:33:47:Clean exit
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 7:26 pm
by 7im
Yes, system section...
00:31:16: ******************************* System ********************************
.
.
00:31:16: CUDA: Not detected
.
00:31:16:Win32 Service: true
.
No CUDA, no folding.
Please also note, GPU slots will not fold when the client is setup to run as a service. Microsoft prevents this. This is not a client issue.
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 9:14 pm
by superkingkong
7im wrote:Yes, system section...
00:31:16: ******************************* System ********************************
.
.
00:31:16: CUDA: Not detected
.
00:31:16:Win32 Service: true
.
No CUDA, no folding.
Please also note, GPU slots will not fold when the client is setup to run as a service. Microsoft prevents this. This is not a client issue.
Thanks.
Do i just need to install the CUDA toolkit 4.1 from nvidia website?
Got it, i'm running on the "recommended value" ... the one with FAHControl. Is that one ok?
Thank you
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 9:19 pm
by 7im
Swell.
Letting Windows bootup and log in with a user before starting FAH allows CUDA to fully initalize, which then allows FAH to use CUDA in folding.
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 9:30 pm
by superkingkong
hmm.. after installing CUDA toolkit 4.1 with typical installation... still no luck
CUDA is still not detected.
win service is true... but i'm not running it as service....??
I used the GPU-Z, the CUDA is checked....
btw, just a note. I'm in the office now, i use logmein to remotely connected to the pc at home. Will this give a problem?
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 9:43 pm
by 7im
Yes, likely the problem. Remote connections often substitute their own video setup to compress the data. Saw this same problem just last week.
VNC is known to work. Remote Desktop usually does not work. IIRC, LMI fails as well.
Reboot the machine when you are done with LMI, and fah should come back up and run normally. Let it run for a while. Then go back in with LMI. The log should show folding progress.
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 10:52 pm
by superkingkong
Followed the instructions, seems like not working. It's showing READY for GPU0 and GPU1.
Do i need to enter any switches? like -forcegpu or something?
Re: Need help... GPU folding keeps crashing.
Posted: Thu Mar 22, 2012 11:24 pm
by 7im
you could add "client-type" of "advanced" to the slot options, but shouldn't be necessary.
Re: Need help... GPU folding keeps crashing.
Posted: Sat Mar 24, 2012 1:37 am
by superkingkong
Good news.... Last night, after i reached home from work, i re-format and re-install win7-64bit. Installed the drivers from the MSI cd - 285.66 and installed the folding client v7. CUDA was detected... folding started since then
I didn't even have to install cuda toolkit.
I'm not sure why, earlier, cuda was not detected. Maybe nvidia latest drivers has problem? or maybe i choosed custom during installation of folding client? ... but i didn't change anything though... everything was with default value. .. after installation, cuda was not detected, and it was saying that i'm running as win32 service..., which was wrong. I was using the Fah Control... hmm strange