Folding Forum

Posted: **Thu Feb 09, 2012 9:50 am**

Had my first WU fail on V7 this night..

here is the log:

05:15:15:WU01:FS00:0xa4:
05:15:15:WU01:FS00:0xa4:*------------------------------*
05:15:15:WU01:FS00:0xa4:Folding@Home Gromacs Core
05:15:15:WU01:FS00:0xa4:Version 2.27 (Thu Feb 10 09:46:40 PST 2011)
05:15:15:WU01:FS00:0xa4:
05:15:15:WU01:FS00:0xa4:Preparing to commence simulation
05:15:15:WU01:FS00:0xa4:- Ensuring status. Please wait.
05:15:24:WU01:FS00:0xa4:- Looking at optimizations...
05:15:24:WU01:FS00:0xa4:- Working with standard loops on this execution.
05:15:24:WU01:FS00:0xa4:- Previous termination of core was improper.
05:15:24:WU01:FS00:0xa4:- Going to use standard loops.
05:15:24:WU01:FS00:0xa4:- Files status OK
05:15:24:WU01:FS00:0xa4:- Expanded 21522 -> 505440 (decompressed 2348.4 percent)
05:15:24:WU01:FS00:0xa4:Called DecompressByteArray: compressed_data_size=21522 data_size=505440, decompressed_data_size=505440 diff=0
05:15:24:WU01:FS00:0xa4:- Digital signature verified
05:15:24:WU01:FS00:0xa4:
05:15:24:WU01:FS00:0xa4:Project: 7600 (Run 38, Clone 15, Gen 26)
05:15:24:WU01:FS00:0xa4:
05:15:24:WU01:FS00:0xa4:Entering M.D.
05:15:30:WU01:FS00:0xa4:Mapping NT from 8 to 8 
05:15:31:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
05:16:52:WU01:FS00:Starting
05:16:52:WU01:FS00:Running FahCore: //Applications/fahclient.app/Contents/MacOS/FAHCoreWrapper "/Users/**********/Library/Application Support/FAHClient/cores/www.stanford.edu/~pande/OSX/AMD64/Core_a4.fah/FahCore_a4" -dir 01 -suffix 01 -version 701 -checkpoint 3 -np 8
05:16:52:WU01:FS00:Started FahCore on PID 2730
05:16:52:WU01:FS00:Core PID:2732
05:16:52:WU01:FS00:FahCore 0xa4 started

And it has repeated this since.

Ow and my system specs:

Code: Select all

15:21:02:************************* Folding@home Client *************************
15:21:02:    Website: http://folding.stanford.edu/
15:21:02:  Copyright: (c) 2009-2012 Stanford University
15:21:02:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
15:21:02:       Args: 
15:21:02:     Config: /Users/***************/Library/Application
15:21:02:             Support/FAHClient/config.xml
15:21:02:******************************** Build ********************************
15:21:02:    Version: 7.1.43
15:21:02:       Date: Jan 2 2012
15:21:02:       Time: 12:41:56
15:21:02:    SVN Rev: 3223
15:21:02:     Branch: fah/trunk/client
15:21:02:   Compiler: Intel(R) C++ g++ 4.2 mode 1110
15:21:02:    Options: -std=gnu++98 -diag-disable 279 -O3 -funroll-loops -msse3
15:21:02:             -axSSSE3,SSE4.1,SSE4.2 -openmp -restrict
15:21:02:   Platform: darwin 10.5.0
15:21:02:       Bits: 32
15:21:02:       Mode: Release
15:21:02:******************************* System ********************************
15:21:02:        CPU: Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz
15:21:02:     CPU ID: GenuineIntel Family 6 Model 42 Stepping 7
15:21:02:       CPUs: 8
15:21:02:     Memory: 4.00GiB
15:21:02:Free Memory: 3.11GiB
15:21:02:    Threads: POSIX_THREADS
15:21:02: On Battery: false
15:21:02: UTC offset: 1
15:21:02:        PID: 73
15:21:02:        CWD: /Users/**************/Library/Application Support/FAHClient
15:21:02:         OS: Darwin 10.8.0 x86_64
15:21:02:    OS Arch: AMD64
15:21:02:       GPUs: 1
15:21:02:      GPU 0: ATI:4 NI Seymour [AMD Radeon HD 6470M]
15:21:02:       CUDA: Not detected
15:21:02:***********************************************************************

Posted: **Fri Feb 10, 2012 5:49 pm**

Thanks for reporting your issues with this work unit.

At this time, there is no data back in regard to Project: 7600 (Run 38, Clone 15, Gen 26). I'll mark this one for moderator follow-up.

I don't see enough of your log for much of a clue, though. Perhaps someone else will have a basis for a guess.

The only thing I see is this:

05:15:24:WU01:FS00:0xa4:- Working with standard loops on this execution.
05:15:24:WU01:FS00:0xa4:- Previous termination of core was improper.
05:15:24:WU01:FS00:0xa4:- Going to use standard loops.

Make sure you are shutting the client down properly. I can't tell from the log portions you posted whether this is a user error or if the client is shutting itself down.

Are you overclocking? If so, try backing off from that.

Posted: **Fri Feb 10, 2012 6:53 pm**

On A3 that error is purely cosmetic, is it the same for A4?

Posted: **Fri Feb 10, 2012 8:41 pm**

I don't have an answer for your question, Nathan_P, sorry. Hopefully someone else will.

Posted: **Fri Feb 10, 2012 9:27 pm**

The error appears to come from a shutdown problem or something along those lines.

viewtopic.php?f=47&t=16305

viewtopic.php?f=67&t=20576

Posted: **Fri Feb 10, 2012 9:51 pm**

Nathan_P wrote:On A3 that error is purely cosmetic, is it the same for A4?

Yes, cosmetic, for all SMP capable fahcores, a3, a4, a5, a6, etc.

Posted: **Sun Feb 12, 2012 10:00 pm**

No overclock on this system..

It's just running stock.

Grandpa_01 wrote:The error appears to come from a shutdown problem or something along those lines.

viewtopic.php?f=47&t=16305

viewtopic.php?f=67&t=20576

that would be a self-generated (perhaps not the right word) error then, as the system was kept running overnight, I found this error in the morning. It also couldn't have been an power outage as all my other rigs, had been unaffected.

I haven't deleted the slot/WU yet (just created a new one), so if you need me to post something/test something, just let me know.

Posted: **Sun Feb 12, 2012 10:07 pm**

So far there is no evidence anyone has been able to complete Project: 7600 (Run 38, Clone 15, Gen 26). There is nothing to prove it is not a bad WU. If you are folding additional work units and not seeing the same trouble, I don't know that you need to suspect a problem on your end at this point. We do have this marked to periodically check to see if anyone has success with this one, though.

Posted: **Sun Mar 04, 2012 1:31 pm**

Following up, this one has credited to another donor, so I'll now take it off the follow-up list.

Your WU (P7600 R38 C15 G26) was added to the stats database on 2012-02-17 02:08:23 for 937 points of credit.

Folding Forum

Project: 7600 (Run 38, Clone 15, Gen 26)

Project: 7600 (Run 38, Clone 15, Gen 26)

Re: Project: 7600 (Run 38, Clone 15, Gen 26)

Re: Project: 7600 (Run 38, Clone 15, Gen 26)

Re: Project: 7600 (Run 38, Clone 15, Gen 26)

Re: Project: 7600 (Run 38, Clone 15, Gen 26)

Re: Project: 7600 (Run 38, Clone 15, Gen 26)

Re: Project: 7600 (Run 38, Clone 15, Gen 26)

Re: Project: 7600 (Run 38, Clone 15, Gen 26)

Re: Project: 7600 (Run 38, Clone 15, Gen 26)