Page 1 of 1

Project: 7018 (Run 2, Clone 19, Gen 3) Incorrect Points

Posted: Fri Jul 01, 2011 8:37 am
by martiou
I sent this WU on July 1 04:22:10 UTC, and as DrBB1, I did only receive the nominal 600 points allocated to the WU.

Code: Select all

[04:21:21] Initial: 0000; - Receiving payload (expected size: 54384)
[04:21:22] - Downloaded at ~53 kB/s
[04:21:22] - Averaged speed for that direction ~74 kB/s
[04:21:22] + Received work.
[04:21:22] Trying to send all finished work units
[04:21:22] + No unsent completed units remaining.
[04:21:22] + Closed connections
[04:21:22] 
[04:21:22] + Processing work unit
[04:21:22] Core required: FahCore_a4.exe
[04:21:22] Core found.
[04:21:22] Working on queue slot 02 [June 29 04:21:22 UTC]
[04:21:22] + Working ...
[04:21:22] - Calling '.\FahCore_a4.exe -dir work/ -suffix 02 -checkpoint 3 -service -verbose -lifeline 268 -version 623'

[04:21:22] 
[04:21:22] *------------------------------*
[04:21:22] Folding@Home Gromacs GB Core
[04:21:22] Version 2.27 (Dec. 15, 2010)
[04:21:22] 
[04:21:22] Preparing to commence simulation
[04:21:22] - Looking at optimizations...
[04:21:22] - Created dyn
[04:21:22] - Files status OK
[04:21:22] - Expanded 53872 -> 198744 (decompressed 368.9 percent)
[04:21:22] Called DecompressByteArray: compressed_data_size=53872 data_size=198744, decompressed_data_size=198744 diff=0
[04:21:22] - Digital signature verified
[04:21:22] 
[04:21:22] Project: 7018 (Run 2, Clone 19, Gen 3)
[04:21:22] 
[04:21:22] Assembly optimizations on if available.
[04:21:22] Entering M.D.
[04:21:28] Mapping NT from 1 to 1 
[04:21:28] Completed 0 out of 10000000 steps  (0%)
[04:48:16] Completed 100000 out of 10000000 steps  (1%)
[05:15:11] Completed 200000 out of 10000000 steps  (2%)
[05:41:59] Completed 300000 out of 10000000 steps  (3%)
[06:08:47] Completed 400000 out of 10000000 steps  (4%)
[06:35:35] Completed 500000 out of 10000000 steps  (5%)
[07:02:23] Completed 600000 out of 10000000 steps  (6%)
[07:29:15] Completed 700000 out of 10000000 steps  (7%)
[07:56:02] Completed 800000 out of 10000000 steps  (8%)
[08:22:50] Completed 900000 out of 10000000 steps  (9%)
[08:49:38] Completed 1000000 out of 10000000 steps  (10%)
[09:16:33] Completed 1100000 out of 10000000 steps  (11%)
[09:43:21] Completed 1200000 out of 10000000 steps  (12%)
[10:10:09] Completed 1300000 out of 10000000 steps  (13%)
[10:15:18] - Autosending finished units... [June 29 10:15:18 UTC]
[10:15:18] Trying to send all finished work units
[10:15:18] + No unsent completed units remaining.
[10:15:18] - Autosend completed
[10:36:57] Completed 1400000 out of 10000000 steps  (14%)
[11:03:45] Completed 1500000 out of 10000000 steps  (15%)
[11:30:33] Completed 1600000 out of 10000000 steps  (16%)
[11:57:21] Completed 1700000 out of 10000000 steps  (17%)
[12:24:09] Completed 1800000 out of 10000000 steps  (18%)
[12:51:01] Completed 1900000 out of 10000000 steps  (19%)
[13:18:22] Completed 2000000 out of 10000000 steps  (20%)
[13:46:39] Completed 2100000 out of 10000000 steps  (21%)
[14:15:39] Completed 2200000 out of 10000000 steps  (22%)
[14:43:11] Completed 2300000 out of 10000000 steps  (23%)
[15:10:39] Completed 2400000 out of 10000000 steps  (24%)
[15:45:33] Completed 2500000 out of 10000000 steps  (25%)
[16:15:18] - Autosending finished units... [June 29 16:15:18 UTC]
[16:15:18] Trying to send all finished work units
[16:15:18] + No unsent completed units remaining.
[16:15:18] - Autosend completed
[16:16:45] Completed 2600000 out of 10000000 steps  (26%)
[16:44:26] Completed 2700000 out of 10000000 steps  (27%)
[17:14:29] Completed 2800000 out of 10000000 steps  (28%)
[17:42:41] Completed 2900000 out of 10000000 steps  (29%)
[18:13:55] Completed 3000000 out of 10000000 steps  (30%)
[18:44:16] Completed 3100000 out of 10000000 steps  (31%)
[19:15:34] Completed 3200000 out of 10000000 steps  (32%)
[19:43:40] Completed 3300000 out of 10000000 steps  (33%)
[20:11:46] Completed 3400000 out of 10000000 steps  (34%)
[20:43:03] Completed 3500000 out of 10000000 steps  (35%)
[21:22:37] Completed 3600000 out of 10000000 steps  (36%)
[21:58:26] Completed 3700000 out of 10000000 steps  (37%)
[22:15:18] - Autosending finished units... [June 29 22:15:18 UTC]
[22:15:18] Trying to send all finished work units
[22:15:18] + No unsent completed units remaining.
[22:15:18] - Autosend completed
[22:25:20] Completed 3800000 out of 10000000 steps  (38%)
[22:52:08] Completed 3900000 out of 10000000 steps  (39%)
[23:18:56] Completed 4000000 out of 10000000 steps  (40%)
[23:45:44] Completed 4100000 out of 10000000 steps  (41%)
[00:12:36] Completed 4200000 out of 10000000 steps  (42%)
[00:39:24] Completed 4300000 out of 10000000 steps  (43%)
[01:06:12] Completed 4400000 out of 10000000 steps  (44%)
[01:33:08] Completed 4500000 out of 10000000 steps  (45%)
[01:59:59] Completed 4600000 out of 10000000 steps  (46%)
[02:26:48] Completed 4700000 out of 10000000 steps  (47%)
[02:53:36] Completed 4800000 out of 10000000 steps  (48%)
[03:20:23] Completed 4900000 out of 10000000 steps  (49%)
[03:47:11] Completed 5000000 out of 10000000 steps  (50%)
[04:13:59] Completed 5100000 out of 10000000 steps  (51%)
[04:15:18] - Autosending finished units... [June 30 04:15:18 UTC]
[04:15:18] Trying to send all finished work units
[04:15:18] + No unsent completed units remaining.
[04:15:18] - Autosend completed
[04:40:47] Completed 5200000 out of 10000000 steps  (52%)
[05:07:34] Completed 5300000 out of 10000000 steps  (53%)
[05:34:38] Completed 5400000 out of 10000000 steps  (54%)
[06:07:11] Completed 5500000 out of 10000000 steps  (55%)
[06:36:47] Completed 5600000 out of 10000000 steps  (56%)
[07:10:37] Completed 5700000 out of 10000000 steps  (57%)
[07:42:33] Completed 5800000 out of 10000000 steps  (58%)
[08:15:49] Completed 5900000 out of 10000000 steps  (59%)
[08:58:33] Completed 6000000 out of 10000000 steps  (60%)
[09:35:32] Completed 6100000 out of 10000000 steps  (61%)
[10:08:47] Completed 6200000 out of 10000000 steps  (62%)
[10:15:18] - Autosending finished units... [June 30 10:15:18 UTC]
[10:15:18] Trying to send all finished work units
[10:15:18] + No unsent completed units remaining.
[10:15:18] - Autosend completed
[10:44:06] Completed 6300000 out of 10000000 steps  (63%)
[11:16:41] Completed 6400000 out of 10000000 steps  (64%)
[11:46:11] Completed 6500000 out of 10000000 steps  (65%)
[12:19:28] Completed 6600000 out of 10000000 steps  (66%)
[12:56:31] Completed 6700000 out of 10000000 steps  (67%)
[13:27:28] Completed 6800000 out of 10000000 steps  (68%)
[13:55:11] Completed 6900000 out of 10000000 steps  (69%)
[14:22:41] Completed 7000000 out of 10000000 steps  (70%)
[14:54:21] Completed 7100000 out of 10000000 steps  (71%)
[15:27:02] Completed 7200000 out of 10000000 steps  (72%)
[15:55:44] Completed 7300000 out of 10000000 steps  (73%)
[16:15:18] - Autosending finished units... [June 30 16:15:18 UTC]
[16:15:18] Trying to send all finished work units
[16:15:18] + No unsent completed units remaining.
[16:15:18] - Autosend completed
[16:22:35] Completed 7400000 out of 10000000 steps  (74%)
[16:49:23] Completed 7500000 out of 10000000 steps  (75%)
[17:16:12] Completed 7600000 out of 10000000 steps  (76%)
[17:50:34] Completed 7700000 out of 10000000 steps  (77%)
[18:17:47] Completed 7800000 out of 10000000 steps  (78%)
[18:52:17] Completed 7900000 out of 10000000 steps  (79%)
[19:19:26] Completed 8000000 out of 10000000 steps  (80%)
[19:46:31] Completed 8100000 out of 10000000 steps  (81%)
[20:13:35] Completed 8200000 out of 10000000 steps  (82%)
[20:40:39] Completed 8300000 out of 10000000 steps  (83%)
[21:07:44] Completed 8400000 out of 10000000 steps  (84%)
[21:34:59] Completed 8500000 out of 10000000 steps  (85%)
[22:02:05] Completed 8600000 out of 10000000 steps  (86%)
[22:15:18] - Autosending finished units... [June 30 22:15:18 UTC]
[22:15:18] Trying to send all finished work units
[22:15:18] + No unsent completed units remaining.
[22:15:18] - Autosend completed
[22:29:11] Completed 8700000 out of 10000000 steps  (87%)
[22:56:18] Completed 8800000 out of 10000000 steps  (88%)
[23:23:25] Completed 8900000 out of 10000000 steps  (89%)
[23:50:31] Completed 9000000 out of 10000000 steps  (90%)
[00:17:36] Completed 9100000 out of 10000000 steps  (91%)
[00:44:41] Completed 9200000 out of 10000000 steps  (92%)
[01:11:46] Completed 9300000 out of 10000000 steps  (93%)
[01:39:12] Completed 9400000 out of 10000000 steps  (94%)
[02:06:18] Completed 9500000 out of 10000000 steps  (95%)
[02:33:25] Completed 9600000 out of 10000000 steps  (96%)
[03:00:31] Completed 9700000 out of 10000000 steps  (97%)
[03:27:37] Completed 9800000 out of 10000000 steps  (98%)
[03:54:42] Completed 9900000 out of 10000000 steps  (99%)
[04:15:18] - Autosending finished units... [July 1 04:15:18 UTC]
[04:15:18] Trying to send all finished work units
[04:15:18] + No unsent completed units remaining.
[04:15:18] - Autosend completed
[04:21:48] Completed 10000000 out of 10000000 steps  (100%)
[04:21:48] DynamicWrapper: Finished Work Unit: sleep=10000
[04:21:58] 
[04:21:58] Finished Work Unit:
[04:21:58] - Reading up to 2048280 from "work/wudata_02.trr": Read 2048280
[04:21:58] trr file hash check passed.
[04:21:58] - Reading up to 213136 from "work/wudata_02.xtc": Read 213136
[04:21:58] xtc file hash check passed.
[04:21:58] edr file hash check passed.
[04:21:58] logfile size: 80504
[04:21:58] Leaving Run
[04:22:02] - Writing 2366392 bytes of core data to disk...
[04:22:04] Done: 2365880 -> 1884259 (compressed to 79.6 percent)
[04:22:04]   ... Done.
[04:22:05] - Shutting down core
[04:22:05] 
[04:22:05] Folding@home Core Shutdown: FINISHED_UNIT
[04:22:10] CoreStatus = 64 (100)
[04:22:10] Unit 2 finished with 82 percent of time to deadline remaining.
[04:22:10] Updated performance fraction: 0.797022
[04:22:10] Sending work to server
[04:22:10] Project: 7018 (Run 2, Clone 19, Gen 3)
[04:22:10] - Read packet limit of 540015616... Set to 524286976.


[04:22:10] + Attempting to send results [July 1 04:22:10 UTC]
[04:22:10] - Reading file work/wuresults_02.dat from core
[04:22:10]   (Read 1884771 bytes from disk)
[04:22:10] Connecting to http://129.74.85.15:8080/
[04:22:36] Posted data.
[04:22:36] Initial: 0000; - Uploaded at ~70 kB/s
[04:22:36] - Averaged speed for that direction ~75 kB/s
[04:22:36] + Results successfully sent
[04:22:36] Thank you for your contribution to Folding@Home.
[04:22:36] + Number of Units Completed: 1211
I should have the same issue as DrBB1.
Can you do something ?

Thanks in advance.

Re: Project: 7018 (Run 2, Clone 19, Gen 3) Incorrect Points

Posted: Fri Jul 01, 2011 2:25 pm
by izaguirr
The WS for these projects has been restarted such that it should assign bonus points from now on
I am not sure about re-assigning points but will look into it

Re: Project: 7018 (Run 2, Clone 19, Gen 3) Incorrect Points

Posted: Fri Jul 01, 2011 3:04 pm
by izaguirr
I've confirmed that it is very difficult to do manual re-credit on these projects. However, bonus credits should be OK now

Re: Project: 7018 (Run 2, Clone 19, Gen 3) Incorrect Points

Posted: Mon Jun 04, 2012 4:27 pm
by muziqaz
I just received this project on my newly bought I7 3930@4.5ghz
I am fahclient v7 is reporting quite a huge amount of PPD
with 1m11sec TPF I should be getting ~75K PPD
Is that correct, can anyone with I7s who had theirs hardware for long time can confirm if this is too much, or normal or fahclient is going crazy, or base points are too big or K factor is too big, or maybe this is bigbeta WU?
I am new to 12 thread i7s so I am confused

Re: Project: 7018 (Run 2, Clone 19, Gen 3) Incorrect Points

Posted: Mon Jun 04, 2012 4:42 pm
by Joe_H
muziqaz wrote:I just received this project on my newly bought I7 3930@4.5ghz
I am fahclient v7 is reporting quite a huge amount of PPD
with 1m11sec TPF I should be getting ~75K PPD
Is that correct, can anyone with I7s who had theirs hardware for long time can confirm if this is too much, or normal or fahclient is going crazy, or base points are too big or K factor is too big, or maybe this is bigbeta WU?
I am new to 12 thread i7s so I am confused
7018 is not a bigbeta or big-anything WU. The PPD does sound on the high side, but there is a known bug with both the TPF and PPD numbers reported by the V7 client. They will often alternate between too high and too low, you would have to check the actual time intervals reported in the log file to see what they should be. The average over 5-10 frames (1%) is what should be reported as your TPF, there are some PPD calculators around to plug that and the project info into to get an estimated PPD.

Re: Project: 7018 (Run 2, Clone 19, Gen 3) Incorrect Points

Posted: Mon Jun 04, 2012 4:56 pm
by muziqaz
The TPF in the log is 1min11secs :) And I know about 3rd party monitoring tools, but as a beta tester I give fahclient a chance :D

Re: Project: 7018 (Run 2, Clone 19, Gen 3) Incorrect Points

Posted: Mon Jun 04, 2012 5:08 pm
by iceman1992
The 7018 on my i5-2500K at 4.1GHz (4C/4T) gives me about 25-30K PPD. 75K for your system sounds within normal range :D

Re: Project: 7018 (Run 2, Clone 19, Gen 3) Incorrect Points

Posted: Mon Jun 04, 2012 5:21 pm
by muziqaz
Hm, strange, as other projects are within 40k and 60k. But now I downloaded HFM.net and it is reporting 80k for 6970 gpu plus my i7. So fahclient isn't wrong, though it missed GPU ppd :D But if it is within norm, I won't complain. I missed it when it went through beta, I guess guys over there sorted PPD issues if any already.
Thanks for info :)

Oh, oh, P.S. forgot something. this PPD and TPF is for 11 Threads, as one thread is given to AMD GPU.

Re: Project: 7018 (Run 2, Clone 19, Gen 3) Incorrect Points

Posted: Mon Jun 04, 2012 5:46 pm
by bruce
And I'm sure you know that 11 threads is a dangerous number. Since they're HT threads, I recommend you switch to a safer number since the TPF for any value >= the number of FPUs isn't going to make a huge difference in TPF.

Re: Project: 7018 (Run 2, Clone 19, Gen 3) Incorrect Points

Posted: Mon Jun 04, 2012 6:15 pm
by muziqaz
yes I know it is dangerous :D Will have to switch