Folding Forum

Posted: **Thu Jun 09, 2011 12:14 pm**

I process units for approximately 7 hours per day, 5 days per week on my laptop.

90% of the time, the unit's deadline passes before it is completed.

How can I avoid this?

Posted: **Thu Jun 09, 2011 6:40 pm**

watty1964 wrote:I process units for approximately 7 hours per day, 5 days per week on my laptop.

90% of the time, the unit's deadline passes before it is completed.

How can I avoid this?

Hi and welcome to the forum!!

I am guessing that you are running the SMP client - projects using this client are designed to be run nearly 24/7, if you are not willing/able to run you laptop for longer periods of time i would suggest running the classic uniprocessor client

Posted: **Thu Jun 09, 2011 6:41 pm**

Hello watty1964, welcome to the forum.

The obvious answer is to fold more time each day, or to fold more days per week. And to make sure the laptop is plugged in (not on battery) as much as possible so the laptop runs at full speed.

Without knowing more about your hardware, or which client you are running, any further suggestions would simply be wild guesses. Please post more info so we can offer the best options.

Posted: **Thu Jun 09, 2011 7:35 pm**

7im wrote:Hello watty1964, welcome to the forum.

The obvious answer is to fold more time each day, or to fold more days per week. And to make sure the laptop is plugged in (not on battery) as much as possible so the laptop runs at full speed.

Without knowing more about your hardware, or which client you are running, any further suggestions would simply be wild guesses. Please post more info so we can offer the best options.

Hi,

I've been folding for at least 4 years as OAP_Watty and have never had this problem before. I use the DOS client (I don't know the proper name for it) on a new Dell Studio 1737 laptop with INTEL CORE 2 DUO processors which is always plugged in and not running on battery. One client is dedicated to one processor and runs as a service and the other, dedicated to the 2nd processor, I start manually when my laptop isn't too busy.

Obviously, I could fold more but don't want to leave the machine on solely for the purpose of folding. This way of folding has worked fine for me up until recently.

Andy

Posted: **Thu Jun 09, 2011 8:08 pm**

The classic client's deadline is very lenient, over a month is sooner a rule then an exception I believe and it's hard to phantom you're not able to finish them in time with your usage pattern, but maybe I'm wrong. The sure way to tell what is what is if you posted the log files for both clients so we can take a look at what's happening.

Posted: **Thu Jun 09, 2011 8:30 pm**

It would be helpful, for diagnosis purposes, if you gave copies of the logs for the two clients that you are using. That way we could see what is actually going on.

That being said, it may be that, because of a power configuration issue, your new laptop is actually going to sleep rather than folding. Also, perhaps you have a screen saver (or other application scheduled to run when you are not actively on the machine) that is using the CPU at a higher priority than folding causing folding to not run in favor of the screen saver.

It is hard to believe that if you are using the uni-processor client that you'd be expiring WU's with their long deadlines (typically 30+ days) if everything was working correctly. However, if you have two SMP clients running at the same time then that could cause deadline issues. Even a single client running the SMP client could cause a problem if you are not giving it enough running time for their deadlines are much shorter (typically 4-7 days).

Posted: **Thu Jun 09, 2011 10:39 pm**

I know, I know, it's crazy isn't it? I've being doing this for years and it's only recently that this has started happening.

No, there is no screen saver running and no, my laptop never sleeps ( I don't trust sleeping or hibernating).

How should I post the logs? Should I just copy and paste the last few weeks worth?

Posted: **Thu Jun 09, 2011 10:43 pm**

Well fahlog and fahlog-prev I think won't go that far back but yes post what you have preferably in [code][/code] tags to keep it neat.

Posted: **Thu Jun 09, 2011 11:14 pm**

fahprevlog.txt
Typical unit started May14th and expired May 22nd

Code: Select all


--- Opening Log file [May 9 09:43:54 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[09:43:54] - Ask before connecting: No
[09:43:54] - User name: OAP_Watty (Team 61360)
[09:43:54] - User ID: 3DD2044A5C53D36F
[09:43:54] - Machine ID: 2
[09:43:54] 
[09:43:55] Loaded queue successfully.
[09:43:55] 
[09:43:55] + Processing work unit
[09:43:55] Core required: FahCore_a4.exe
[09:43:55] Core found.
[09:43:55] Working on queue slot 04 [May 9 09:43:55 UTC]
[09:43:55] + Working ...
[09:43:55] 
[09:43:55] *------------------------------*
[09:43:55] Folding@Home Gromacs GB Core
[09:43:55] Version 2.27 (Dec. 15, 2010)
[09:43:55] 
[09:43:55] Preparing to commence simulation
[09:43:55] - Looking at optimizations...
[09:43:55] - Files status OK
[09:43:55] - Expanded 56016 -> 210724 (decompressed 376.1 percent)
[09:43:55] Called DecompressByteArray: compressed_data_size=56016 data_size=210724, decompressed_data_size=210724 diff=0
[09:43:55] - Digital signature verified
[09:43:55] 
[09:43:55] Project: 10072 (Run 290, Clone 0, Gen 14)
[09:43:55] 
[09:43:56] Assembly optimizations on if available.
[09:43:56] Entering M.D.
[09:44:02] Using Gromacs checkpoints
[09:44:02] Mapping NT from 1 to 1 
[09:44:03] Resuming from checkpoint
[09:44:03] Verified work/wudata_04.log
[09:44:03] Verified work/wudata_04.trr
[09:44:03] Verified work/wudata_04.xtc
[09:44:03] Verified work/wudata_04.edr
[09:44:04] Completed 1800001 out of 10000000 steps  (18%)

Folding@Home Client Shutdown.


--- Opening Log file [May 9 10:11:02 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[10:11:02] - Ask before connecting: No
[10:11:02] - User name: OAP_Watty (Team 61360)
[10:11:02] - User ID: 3DD2044A5C53D36F
[10:11:02] - Machine ID: 2
[10:11:02] 
[10:11:02] Loaded queue successfully.
[10:11:02] 
[10:11:02] + Processing work unit
[10:11:02] Core required: FahCore_a4.exe
[10:11:02] Core found.
[10:11:02] Working on queue slot 04 [May 9 10:11:02 UTC]
[10:11:02] + Working ...
[10:11:03] 
[10:11:03] *------------------------------*
[10:11:03] Folding@Home Gromacs GB Core
[10:11:03] Version 2.27 (Dec. 15, 2010)
[10:11:03] 
[10:11:03] Preparing to commence simulation
[10:11:03] - Looking at optimizations...
[10:11:03] - Files status OK
[10:11:03] - Expanded 56016 -> 210724 (decompressed 376.1 percent)
[10:11:03] Called DecompressByteArray: compressed_data_size=56016 data_size=210724, decompressed_data_size=210724 diff=0
[10:11:03] - Digital signature verified
[10:11:03] 
[10:11:03] Project: 10072 (Run 290, Clone 0, Gen 14)
[10:11:03] 
[10:11:03] Assembly optimizations on if available.
[10:11:03] Entering M.D.
[10:11:09] Using Gromacs checkpoints
[10:11:09] Mapping NT from 1 to 1 
[10:11:09] Resuming from checkpoint
[10:11:09] Verified work/wudata_04.log
[10:11:09] Verified work/wudata_04.trr
[10:11:09] Verified work/wudata_04.xtc
[10:11:09] Verified work/wudata_04.edr
[10:11:09] Completed 1800001 out of 10000000 steps  (18%)
[10:35:57] Completed 1900000 out of 10000000 steps  (19%)
[11:01:06] Completed 2000000 out of 10000000 steps  (20%)
[11:24:58] Completed 2100000 out of 10000000 steps  (21%)
[11:50:30] Completed 2200000 out of 10000000 steps  (22%)
[12:15:46] Completed 2300000 out of 10000000 steps  (23%)
[12:44:29] Completed 2400000 out of 10000000 steps  (24%)
[13:14:16] Completed 2500000 out of 10000000 steps  (25%)
[13:40:35] Completed 2600000 out of 10000000 steps  (26%)
[14:08:25] Completed 2700000 out of 10000000 steps  (27%)
[14:34:35] Completed 2800000 out of 10000000 steps  (28%)

Folding@Home Client Shutdown.


--- Opening Log file [May 10 09:06:16 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[09:06:16] - Ask before connecting: No
[09:06:16] - User name: OAP_Watty (Team 61360)
[09:06:16] - User ID: 3DD2044A5C53D36F
[09:06:16] - Machine ID: 2
[09:06:16] 
[09:06:16] Loaded queue successfully.
[09:06:16] 
[09:06:16] + Processing work unit
[09:06:16] Core required: FahCore_a4.exe
[09:06:16] Core found.
[09:06:16] Working on queue slot 04 [May 10 09:06:16 UTC]
[09:06:16] + Working ...
[09:06:19] 
[09:06:19] *------------------------------*
[09:06:19] Folding@Home Gromacs GB Core
[09:06:19] Version 2.27 (Dec. 15, 2010)
[09:06:19] 
[09:06:19] Preparing to commence simulation
[09:06:19] - Looking at optimizations...
[09:06:19] - Files status OK
[09:06:19] - Expanded 56016 -> 210724 (decompressed 376.1 percent)
[09:06:19] Called DecompressByteArray: compressed_data_size=56016 data_size=210724, decompressed_data_size=210724 diff=0
[09:06:19] - Digital signature verified
[09:06:19] 
[09:06:19] Project: 10072 (Run 290, Clone 0, Gen 14)
[09:06:19] 
[09:06:20] Assembly optimizations on if available.
[09:06:20] Entering M.D.
[09:06:27] Using Gromacs checkpoints
[09:06:27] Mapping NT from 1 to 1 
[09:06:29] Resuming from checkpoint
[09:06:29] Verified work/wudata_04.log
[09:06:29] Verified work/wudata_04.trr
[09:06:29] Verified work/wudata_04.xtc
[09:06:29] Verified work/wudata_04.edr
[09:06:29] Completed 2800001 out of 10000000 steps  (28%)
[09:31:34] Completed 2900000 out of 10000000 steps  (29%)
[09:55:04] Completed 3000000 out of 10000000 steps  (30%)
[10:16:40] Completed 3100000 out of 10000000 steps  (31%)
[10:38:44] Completed 3200000 out of 10000000 steps  (32%)
[11:00:44] Completed 3300000 out of 10000000 steps  (33%)
[11:23:16] Completed 3400000 out of 10000000 steps  (34%)
[11:45:31] Completed 3500000 out of 10000000 steps  (35%)
[12:07:49] Completed 3600000 out of 10000000 steps  (36%)
[12:29:47] Completed 3700000 out of 10000000 steps  (37%)
[12:51:28] Completed 3800000 out of 10000000 steps  (38%)
[13:13:38] Completed 3900000 out of 10000000 steps  (39%)
[13:37:29] Completed 4000000 out of 10000000 steps  (40%)
[14:01:50] Completed 4100000 out of 10000000 steps  (41%)
[14:26:57] Completed 4200000 out of 10000000 steps  (42%)
[14:58:38] Completed 4300000 out of 10000000 steps  (43%)
[15:23:46] Completed 4400000 out of 10000000 steps  (44%)

Folding@Home Client Shutdown.


--- Opening Log file [May 11 09:17:02 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[09:17:02] - Ask before connecting: No
[09:17:02] - User name: OAP_Watty (Team 61360)
[09:17:02] - User ID: 3DD2044A5C53D36F
[09:17:02] - Machine ID: 2
[09:17:02] 
[09:17:03] Loaded queue successfully.
[09:17:03] 
[09:17:03] + Processing work unit
[09:17:03] Core required: FahCore_a4.exe
[09:17:03] Core found.
[09:17:03] Working on queue slot 04 [May 11 09:17:03 UTC]
[09:17:03] + Working ...
[09:17:03] 
[09:17:03] *------------------------------*
[09:17:03] Folding@Home Gromacs GB Core
[09:17:03] Version 2.27 (Dec. 15, 2010)
[09:17:03] 
[09:17:03] Preparing to commence simulation
[09:17:03] - Looking at optimizations...
[09:17:03] - Files status OK
[09:17:03] - Expanded 56016 -> 210724 (decompressed 376.1 percent)
[09:17:03] Called DecompressByteArray: compressed_data_size=56016 data_size=210724, decompressed_data_size=210724 diff=0
[09:17:03] - Digital signature verified
[09:17:03] 
[09:17:03] Project: 10072 (Run 290, Clone 0, Gen 14)
[09:17:03] 
[09:17:03] Assembly optimizations on if available.
[09:17:03] Entering M.D.
[09:17:09] Using Gromacs checkpoints
[09:17:09] Mapping NT from 1 to 1 
[09:17:09] Resuming from checkpoint
[09:17:09] Verified work/wudata_04.log
[09:17:09] Verified work/wudata_04.trr
[09:17:09] Verified work/wudata_04.xtc
[09:17:09] Verified work/wudata_04.edr
[09:17:09] Completed 4400001 out of 10000000 steps  (44%)
[09:36:58] Completed 4500000 out of 10000000 steps  (45%)
[09:36:58] Unit 4's deadline (May 11 09:27) has passed.
[09:36:58] Going to interrupt core and move on to next unit...
[09:57:30] Completed 4600000 out of 10000000 steps  (46%)
[09:57:30] Unit 4's deadline (May 11 09:27) has passed.
[09:57:30] Going to interrupt core and move on to next unit...
[09:57:33] CoreStatus = 3 (3)
[09:57:33] Client-core communications error: ERROR 0x3
[09:57:33] This is a sign of more serious problems, shutting down.


--- Opening Log file [May 11 10:08:28 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[10:08:28] - Ask before connecting: No
[10:08:28] - User name: OAP_Watty (Team 61360)
[10:08:28] - User ID: 3DD2044A5C53D36F
[10:08:28] - Machine ID: 2
[10:08:28] 
[10:08:28] Loaded queue successfully.
[10:08:28] Unit 4's deadline (May 11 09:27) has passed.
[10:08:42] - Preparing to get new work unit...
[10:08:42] + Attempting to get work packet
[10:08:42] - Connecting to assignment server
[10:08:44] - Successful: assigned to (129.74.85.15).
[10:08:44] + News From Folding@Home: Welcome to Folding@Home
[10:08:44] Loaded queue successfully.
[10:08:45] + Closed connections
[10:08:45] 
[10:08:45] + Processing work unit
[10:08:45] Core required: FahCore_a4.exe
[10:08:45] Core found.
[10:08:45] Working on queue slot 05 [May 11 10:08:45 UTC]
[10:08:45] + Working ...
[10:08:45] 
[10:08:45] *------------------------------*
[10:08:45] Folding@Home Gromacs GB Core
[10:08:45] Version 2.27 (Dec. 15, 2010)
[10:08:45] 
[10:08:45] Preparing to commence simulation
[10:08:45] - Looking at optimizations...
[10:08:45] - Created dyn
[10:08:45] - Files status OK
[10:08:45] - Expanded 55574 -> 206228 (decompressed 371.0 percent)
[10:08:45] Called DecompressByteArray: compressed_data_size=55574 data_size=206228, decompressed_data_size=206228 diff=0
[10:08:45] - Digital signature verified
[10:08:45] 
[10:08:45] Project: 10062 (Run 187, Clone 0, Gen 13)
[10:08:45] 
[10:08:45] Assembly optimizations on if available.
[10:08:45] Entering M.D.
[10:08:51] Mapping NT from 1 to 1 
[10:08:52] Completed 0 out of 10000000 steps  (0%)
[10:27:05] Completed 100000 out of 10000000 steps  (1%)
[10:46:12] Completed 200000 out of 10000000 steps  (2%)
[11:05:47] Completed 300000 out of 10000000 steps  (3%)
[11:24:21] Completed 400000 out of 10000000 steps  (4%)
[11:42:50] Completed 500000 out of 10000000 steps  (5%)
[12:00:39] Completed 600000 out of 10000000 steps  (6%)
[12:18:16] Completed 700000 out of 10000000 steps  (7%)
[12:35:56] Completed 800000 out of 10000000 steps  (8%)
[12:54:04] Completed 900000 out of 10000000 steps  (9%)
[13:12:14] Completed 1000000 out of 10000000 steps  (10%)
[13:30:34] Completed 1100000 out of 10000000 steps  (11%)
[13:48:44] Completed 1200000 out of 10000000 steps  (12%)
[14:07:18] Completed 1300000 out of 10000000 steps  (13%)
[14:25:05] Completed 1400000 out of 10000000 steps  (14%)
[14:42:48] Completed 1500000 out of 10000000 steps  (15%)
[15:00:38] Completed 1600000 out of 10000000 steps  (16%)
[15:18:34] Completed 1700000 out of 10000000 steps  (17%)

Folding@Home Client Shutdown.


--- Opening Log file [May 13 08:50:05 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[08:50:05] - Ask before connecting: No
[08:50:05] - User name: OAP_Watty (Team 61360)
[08:50:05] - User ID: 3DD2044A5C53D36F
[08:50:05] - Machine ID: 2
[08:50:05] 
[08:50:05] Loaded queue successfully.
[08:50:05] 
[08:50:05] + Processing work unit
[08:50:05] Core required: FahCore_a4.exe
[08:50:05] Core found.
[08:50:05] Working on queue slot 05 [May 13 08:50:05 UTC]
[08:50:05] + Working ...
[08:50:05] 
[08:50:05] *------------------------------*
[08:50:05] Folding@Home Gromacs GB Core
[08:50:05] Version 2.27 (Dec. 15, 2010)
[08:50:05] 
[08:50:05] Preparing to commence simulation
[08:50:05] - Looking at optimizations...
[08:50:05] - Files status OK
[08:50:06] - Expanded 55574 -> 206228 (decompressed 371.0 percent)
[08:50:06] Called DecompressByteArray: compressed_data_size=55574 data_size=206228, decompressed_data_size=206228 diff=0
[08:50:06] - Digital signature verified
[08:50:06] 
[08:50:06] Project: 10062 (Run 187, Clone 0, Gen 13)
[08:50:06] 
[08:50:06] Assembly optimizations on if available.
[08:50:06] Entering M.D.
[08:50:12] Using Gromacs checkpoints
[08:50:12] Mapping NT from 1 to 1 
[08:50:12] Resuming from checkpoint
[08:50:12] Verified work/wudata_05.log
[08:50:12] Verified work/wudata_05.trr
[08:50:12] Verified work/wudata_05.xtc
[08:50:12] Verified work/wudata_05.edr
[08:50:12] Completed 1700001 out of 10000000 steps  (17%)
[09:08:25] Completed 1800000 out of 10000000 steps  (18%)
[09:26:22] Completed 1900000 out of 10000000 steps  (19%)
[09:44:26] Completed 2000000 out of 10000000 steps  (20%)
[10:02:29] Completed 2100000 out of 10000000 steps  (21%)
[10:21:05] Completed 2200000 out of 10000000 steps  (22%)
[10:44:34] Completed 2300000 out of 10000000 steps  (23%)
[11:04:41] Completed 2400000 out of 10000000 steps  (24%)
[11:27:07] Completed 2500000 out of 10000000 steps  (25%)
[11:48:40] Completed 2600000 out of 10000000 steps  (26%)
[12:09:02] Completed 2700000 out of 10000000 steps  (27%)
[12:29:28] Completed 2800000 out of 10000000 steps  (28%)
[12:49:27] Completed 2900000 out of 10000000 steps  (29%)
[13:10:32] Completed 3000000 out of 10000000 steps  (30%)
[13:31:53] Completed 3100000 out of 10000000 steps  (31%)
[13:53:27] Completed 3200000 out of 10000000 steps  (32%)
[14:13:37] Completed 3300000 out of 10000000 steps  (33%)
[14:33:28] Completed 3400000 out of 10000000 steps  (34%)
[14:53:33] Completed 3500000 out of 10000000 steps  (35%)
[15:13:33] Completed 3600000 out of 10000000 steps  (36%)
[15:33:10] Completed 3700000 out of 10000000 steps  (37%)
[15:52:44] Completed 3800000 out of 10000000 steps  (38%)
[16:12:36] Completed 3900000 out of 10000000 steps  (39%)
[16:32:17] Completed 4000000 out of 10000000 steps  (40%)
[16:51:31] Completed 4100000 out of 10000000 steps  (41%)
[17:11:15] Completed 4200000 out of 10000000 steps  (42%)
[17:30:47] Completed 4300000 out of 10000000 steps  (43%)
[17:50:18] Completed 4400000 out of 10000000 steps  (44%)
[18:09:50] Completed 4500000 out of 10000000 steps  (45%)
[18:29:27] Completed 4600000 out of 10000000 steps  (46%)
[18:49:53] Completed 4700000 out of 10000000 steps  (47%)
[19:09:43] Completed 4800000 out of 10000000 steps  (48%)
[19:30:46] Completed 4900000 out of 10000000 steps  (49%)
[19:51:54] Completed 5000000 out of 10000000 steps  (50%)
[20:11:55] Completed 5100000 out of 10000000 steps  (51%)
[20:31:34] Completed 5200000 out of 10000000 steps  (52%)
[20:52:07] Completed 5300000 out of 10000000 steps  (53%)
[21:12:26] Completed 5400000 out of 10000000 steps  (54%)
[21:32:53] Completed 5500000 out of 10000000 steps  (55%)
[21:53:01] Completed 5600000 out of 10000000 steps  (56%)
[22:13:48] Completed 5700000 out of 10000000 steps  (57%)
[22:34:29] Completed 5800000 out of 10000000 steps  (58%)
[22:54:51] Completed 5900000 out of 10000000 steps  (59%)
[23:14:46] Completed 6000000 out of 10000000 steps  (60%)
[23:36:58] Completed 6100000 out of 10000000 steps  (61%)
[23:58:00] Completed 6200000 out of 10000000 steps  (62%)
[00:17:49] Completed 6300000 out of 10000000 steps  (63%)
[00:38:30] Completed 6400000 out of 10000000 steps  (64%)
[00:58:36] Completed 6500000 out of 10000000 steps  (65%)
[01:18:32] Completed 6600000 out of 10000000 steps  (66%)
[01:38:23] Completed 6700000 out of 10000000 steps  (67%)
[01:58:11] Completed 6800000 out of 10000000 steps  (68%)
[02:17:44] Completed 6900000 out of 10000000 steps  (69%)
[02:37:34] Completed 7000000 out of 10000000 steps  (70%)
[02:57:34] Completed 7100000 out of 10000000 steps  (71%)
[03:16:59] Completed 7200000 out of 10000000 steps  (72%)
[03:36:46] Completed 7300000 out of 10000000 steps  (73%)
[03:57:06] Completed 7400000 out of 10000000 steps  (74%)
[04:17:34] Completed 7500000 out of 10000000 steps  (75%)
[04:37:07] Completed 7600000 out of 10000000 steps  (76%)
[04:56:54] Completed 7700000 out of 10000000 steps  (77%)
[05:16:28] Completed 7800000 out of 10000000 steps  (78%)
[05:35:59] Completed 7900000 out of 10000000 steps  (79%)
[05:55:26] Completed 8000000 out of 10000000 steps  (80%)
[06:14:57] Completed 8100000 out of 10000000 steps  (81%)
[06:34:21] Completed 8200000 out of 10000000 steps  (82%)
[06:53:50] Completed 8300000 out of 10000000 steps  (83%)
[07:13:20] Completed 8400000 out of 10000000 steps  (84%)
[07:33:29] Completed 8500000 out of 10000000 steps  (85%)
[07:53:08] Completed 8600000 out of 10000000 steps  (86%)
[08:12:40] Completed 8700000 out of 10000000 steps  (87%)
[08:32:45] Completed 8800000 out of 10000000 steps  (88%)
[08:52:05] Completed 8900000 out of 10000000 steps  (89%)
[09:11:41] Completed 9000000 out of 10000000 steps  (90%)
[09:31:25] Completed 9100000 out of 10000000 steps  (91%)
[09:50:55] Completed 9200000 out of 10000000 steps  (92%)
[10:10:18] Completed 9300000 out of 10000000 steps  (93%)
[10:29:50] Completed 9400000 out of 10000000 steps  (94%)
[10:48:53] Completed 9500000 out of 10000000 steps  (95%)
[11:07:57] Completed 9600000 out of 10000000 steps  (96%)
[11:27:12] Completed 9700000 out of 10000000 steps  (97%)
[11:46:25] Completed 9800000 out of 10000000 steps  (98%)
[12:05:37] Completed 9900000 out of 10000000 steps  (99%)
[12:24:46] Completed 10000000 out of 10000000 steps  (100%)
[12:24:46] DynamicWrapper: Finished Work Unit: sleep=10000
[12:24:56] 
[12:24:56] Finished Work Unit:
[12:24:56] - Reading up to 2131908 from "work/wudata_05.trr": Read 2131908
[12:24:57] trr file hash check passed.
[12:24:57] - Reading up to 221608 from "work/wudata_05.xtc": Read 221608
[12:24:57] xtc file hash check passed.
[12:24:57] edr file hash check passed.
[12:24:57] logfile size: 81211
[12:24:57] Leaving Run
[12:24:59] - Writing 2459199 bytes of core data to disk...
[12:24:59] Done: 2458687 -> 1866113 (compressed to 75.8 percent)
[12:24:59]   ... Done.
[12:25:01] - Shutting down core
[12:25:01] 
[12:25:01] Folding@home Core Shutdown: FINISHED_UNIT
[12:25:05] CoreStatus = 64 (100)
[12:25:05] Sending work to server
[12:25:05] Project: 10062 (Run 187, Clone 0, Gen 13)


[12:25:05] + Attempting to send results [May 14 12:25:05 UTC]
[12:25:43] + Results successfully sent
[12:25:43] Thank you for your contribution to Folding@Home.
[12:25:43] + Number of Units Completed: 57

[12:25:48] - Preparing to get new work unit...
[12:25:48] + Attempting to get work packet
[12:25:48] - Connecting to assignment server
[12:25:49] - Successful: assigned to (129.74.85.15).
[12:25:49] + News From Folding@Home: Welcome to Folding@Home
[12:25:49] Loaded queue successfully.
[12:25:50] + Closed connections
[12:25:50] 
[12:25:50] + Processing work unit
[12:25:50] Core required: FahCore_a4.exe
[12:25:50] Core found.
[12:25:50] Working on queue slot 06 [May 14 12:25:50 UTC]
[12:25:50] + Working ...
[12:25:50] 
[12:25:50] *------------------------------*
[12:25:50] Folding@Home Gromacs GB Core
[12:25:50] Version 2.27 (Dec. 15, 2010)
[12:25:50] 
[12:25:50] Preparing to commence simulation
[12:25:50] - Looking at optimizations...
[12:25:50] - Created dyn
[12:25:50] - Files status OK
[12:25:50] - Expanded 51964 -> 192840 (decompressed 371.1 percent)
[12:25:50] Called DecompressByteArray: compressed_data_size=51964 data_size=192840, decompressed_data_size=192840 diff=0
[12:25:50] - Digital signature verified
[12:25:50] 
[12:25:50] Project: 10081 (Run 79, Clone 0, Gen 23)
[12:25:50] 
[12:25:50] Assembly optimizations on if available.
[12:25:50] Entering M.D.
[12:25:56] Mapping NT from 1 to 1 
[12:25:56] Completed 0 out of 10000000 steps  (0%)
[12:43:02] Completed 100000 out of 10000000 steps  (1%)
[13:00:07] Completed 200000 out of 10000000 steps  (2%)
[13:17:14] Completed 300000 out of 10000000 steps  (3%)
[13:34:18] Completed 400000 out of 10000000 steps  (4%)
[13:51:26] Completed 500000 out of 10000000 steps  (5%)
[14:08:39] Completed 600000 out of 10000000 steps  (6%)
[14:25:36] Completed 700000 out of 10000000 steps  (7%)
[14:42:34] Completed 800000 out of 10000000 steps  (8%)
[14:59:35] Completed 900000 out of 10000000 steps  (9%)
[15:17:19] Completed 1000000 out of 10000000 steps  (10%)
[15:34:27] Completed 1100000 out of 10000000 steps  (11%)
[15:51:18] Completed 1200000 out of 10000000 steps  (12%)
[16:07:55] Completed 1300000 out of 10000000 steps  (13%)
[16:25:04] Completed 1400000 out of 10000000 steps  (14%)
[16:42:07] Completed 1500000 out of 10000000 steps  (15%)
[16:59:09] Completed 1600000 out of 10000000 steps  (16%)
[17:16:23] Completed 1700000 out of 10000000 steps  (17%)
[17:33:51] Completed 1800000 out of 10000000 steps  (18%)
[17:50:55] Completed 1900000 out of 10000000 steps  (19%)
[18:07:56] Completed 2000000 out of 10000000 steps  (20%)
[18:25:00] Completed 2100000 out of 10000000 steps  (21%)
[18:42:22] Completed 2200000 out of 10000000 steps  (22%)
[18:59:47] Completed 2300000 out of 10000000 steps  (23%)
[19:17:25] Completed 2400000 out of 10000000 steps  (24%)
[19:34:36] Completed 2500000 out of 10000000 steps  (25%)
[19:51:44] Completed 2600000 out of 10000000 steps  (26%)
[20:08:39] Completed 2700000 out of 10000000 steps  (27%)
[20:25:44] Completed 2800000 out of 10000000 steps  (28%)
[20:42:52] Completed 2900000 out of 10000000 steps  (29%)
[20:59:49] Completed 3000000 out of 10000000 steps  (30%)
[21:17:00] Completed 3100000 out of 10000000 steps  (31%)

Folding@Home Client Shutdown.


--- Opening Log file [May 16 12:41:44 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[12:41:44] - Ask before connecting: No
[12:41:44] - User name: OAP_Watty (Team 61360)
[12:41:44] - User ID: 3DD2044A5C53D36F
[12:41:44] - Machine ID: 2
[12:41:44] 
[12:41:44] Loaded queue successfully.
[12:41:44] 
[12:41:44] + Processing work unit
[12:41:44] Core required: FahCore_a4.exe
[12:41:44] Core found.
[12:41:45] Working on queue slot 06 [May 16 12:41:45 UTC]
[12:41:45] + Working ...
[12:41:46] 
[12:41:46] *------------------------------*
[12:41:46] Folding@Home Gromacs GB Core
[12:41:46] Version 2.27 (Dec. 15, 2010)
[12:41:46] 
[12:41:46] Preparing to commence simulation
[12:41:46] - Looking at optimizations...
[12:41:46] - Files status OK
[12:41:46] - Expanded 51964 -> 192840 (decompressed 371.1 percent)
[12:41:46] Called DecompressByteArray: compressed_data_size=51964 data_size=192840, decompressed_data_size=192840 diff=0
[12:41:46] - Digital signature verified
[12:41:46] 
[12:41:46] Project: 10081 (Run 79, Clone 0, Gen 23)
[12:41:46] 
[12:41:46] Assembly optimizations on if available.
[12:41:46] Entering M.D.
[12:41:52] Using Gromacs checkpoints
[12:41:52] Mapping NT from 1 to 1 
[12:41:52] Resuming from checkpoint
[12:41:52] Verified work/wudata_06.log
[12:41:52] Verified work/wudata_06.trr
[12:41:52] Verified work/wudata_06.xtc
[12:41:52] Verified work/wudata_06.edr
[12:41:52] Completed 3100001 out of 10000000 steps  (31%)
[13:02:04] Completed 3200000 out of 10000000 steps  (32%)
[13:21:03] Completed 3300000 out of 10000000 steps  (33%)
[13:41:54] Completed 3400000 out of 10000000 steps  (34%)
[14:02:14] Completed 3500000 out of 10000000 steps  (35%)
[14:22:37] Completed 3600000 out of 10000000 steps  (36%)
[14:43:45] Completed 3700000 out of 10000000 steps  (37%)
[15:04:09] Completed 3800000 out of 10000000 steps  (38%)
[15:26:41] Completed 3900000 out of 10000000 steps  (39%)

Folding@Home Client Shutdown.


--- Opening Log file [May 18 09:11:26 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[09:11:26] - Ask before connecting: No
[09:11:26] - User name: OAP_Watty (Team 61360)
[09:11:26] - User ID: 3DD2044A5C53D36F
[09:11:26] - Machine ID: 2
[09:11:26] 
[09:11:26] Loaded queue successfully.
[09:11:26] 
[09:11:26] + Processing work unit
[09:11:26] Core required: FahCore_a4.exe
[09:11:26] Core found.
[09:11:26] Working on queue slot 06 [May 18 09:11:26 UTC]
[09:11:26] + Working ...
[09:11:27] 
[09:11:27] *------------------------------*
[09:11:27] Folding@Home Gromacs GB Core
[09:11:27] Version 2.27 (Dec. 15, 2010)
[09:11:27] 
[09:11:27] Preparing to commence simulation
[09:11:27] - Looking at optimizations...
[09:11:27] - Files status OK
[09:11:27] - Expanded 51964 -> 192840 (decompressed 371.1 percent)
[09:11:27] Called DecompressByteArray: compressed_data_size=51964 data_size=192840, decompressed_data_size=192840 diff=0
[09:11:27] - Digital signature verified
[09:11:27] 
[09:11:27] Project: 10081 (Run 79, Clone 0, Gen 23)
[09:11:27] 
[09:11:27] Assembly optimizations on if available.
[09:11:27] Entering M.D.
[09:11:33] Using Gromacs checkpoints
[09:11:33] Mapping NT from 1 to 1 
[09:11:33] Resuming from checkpoint
[09:11:33] Verified work/wudata_06.log
[09:11:33] Verified work/wudata_06.trr
[09:11:33] Verified work/wudata_06.xtc
[09:11:33] Verified work/wudata_06.edr
[09:11:33] Completed 3900001 out of 10000000 steps  (39%)
[09:27:26] Completed 4000000 out of 10000000 steps  (40%)
[09:43:29] Completed 4100000 out of 10000000 steps  (41%)
[09:59:16] Completed 4200000 out of 10000000 steps  (42%)
[10:14:52] Completed 4300000 out of 10000000 steps  (43%)
[10:30:37] Completed 4400000 out of 10000000 steps  (44%)
[10:46:14] Completed 4500000 out of 10000000 steps  (45%)
[11:01:47] Completed 4600000 out of 10000000 steps  (46%)
[11:17:13] Completed 4700000 out of 10000000 steps  (47%)
[11:32:44] Completed 4800000 out of 10000000 steps  (48%)
[11:48:10] Completed 4900000 out of 10000000 steps  (49%)
[12:05:22] Completed 5000000 out of 10000000 steps  (50%)
[12:21:21] Completed 5100000 out of 10000000 steps  (51%)
[12:37:23] Completed 5200000 out of 10000000 steps  (52%)
[12:53:51] Completed 5300000 out of 10000000 steps  (53%)
[13:10:54] Completed 5400000 out of 10000000 steps  (54%)
[13:27:09] Completed 5500000 out of 10000000 steps  (55%)
[13:43:48] Completed 5600000 out of 10000000 steps  (56%)
[13:59:51] Completed 5700000 out of 10000000 steps  (57%)
[14:16:09] Completed 5800000 out of 10000000 steps  (58%)
[14:32:03] Completed 5900000 out of 10000000 steps  (59%)
[14:48:02] Completed 6000000 out of 10000000 steps  (60%)
[15:04:07] Completed 6100000 out of 10000000 steps  (61%)
[15:20:09] Completed 6200000 out of 10000000 steps  (62%)
[15:36:24] Completed 6300000 out of 10000000 steps  (63%)

Folding@Home Client Shutdown.


--- Opening Log file [May 19 10:08:55 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[10:08:55] - Ask before connecting: No
[10:08:55] - User name: OAP_Watty (Team 61360)
[10:08:55] - User ID: 3DD2044A5C53D36F
[10:08:55] - Machine ID: 2
[10:08:55] 
[10:08:56] Loaded queue successfully.
[10:08:56] 
[10:08:56] + Processing work unit
[10:08:56] Core required: FahCore_a4.exe
[10:08:56] Core found.
[10:08:56] Working on queue slot 06 [May 19 10:08:56 UTC]
[10:08:56] + Working ...
[10:08:56] 
[10:08:56] *------------------------------*
[10:08:56] Folding@Home Gromacs GB Core
[10:08:56] Version 2.27 (Dec. 15, 2010)
[10:08:56] 
[10:08:56] Preparing to commence simulation
[10:08:56] - Looking at optimizations...
[10:08:56] - Files status OK
[10:08:56] - Expanded 51964 -> 192840 (decompressed 371.1 percent)
[10:08:56] Called DecompressByteArray: compressed_data_size=51964 data_size=192840, decompressed_data_size=192840 diff=0
[10:08:56] - Digital signature verified
[10:08:56] 
[10:08:56] Project: 10081 (Run 79, Clone 0, Gen 23)
[10:08:56] 
[10:08:56] Assembly optimizations on if available.
[10:08:56] Entering M.D.
[10:09:02] Using Gromacs checkpoints
[10:09:02] Mapping NT from 1 to 1 
[10:09:02] Resuming from checkpoint
[10:09:02] Verified work/wudata_06.log
[10:09:02] Verified work/wudata_06.trr
[10:09:02] Verified work/wudata_06.xtc
[10:09:02] Verified work/wudata_06.edr
[10:09:02] Completed 6300001 out of 10000000 steps  (63%)
[10:27:08] Completed 6400000 out of 10000000 steps  (64%)
[10:45:18] Completed 6500000 out of 10000000 steps  (65%)
[11:13:05] Completed 6600000 out of 10000000 steps  (66%)
[11:34:27] Completed 6700000 out of 10000000 steps  (67%)
[11:51:49] Completed 6800000 out of 10000000 steps  (68%)
[12:08:34] Completed 6900000 out of 10000000 steps  (69%)
[12:26:08] Completed 7000000 out of 10000000 steps  (70%)
[12:44:10] Completed 7100000 out of 10000000 steps  (71%)
[13:01:10] Completed 7200000 out of 10000000 steps  (72%)
[13:18:41] Completed 7300000 out of 10000000 steps  (73%)
[13:36:21] Completed 7400000 out of 10000000 steps  (74%)
[13:54:42] Completed 7500000 out of 10000000 steps  (75%)
[14:13:04] Completed 7600000 out of 10000000 steps  (76%)
[14:30:04] Completed 7700000 out of 10000000 steps  (77%)
[14:47:47] Completed 7800000 out of 10000000 steps  (78%)
[15:05:32] Completed 7900000 out of 10000000 steps  (79%)
[15:24:38] Completed 8000000 out of 10000000 steps  (80%)

Folding@Home Client Shutdown.


--- Opening Log file [May 20 09:25:46 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[09:25:46] - Ask before connecting: No
[09:25:46] - User name: OAP_Watty (Team 61360)
[09:25:46] - User ID: 3DD2044A5C53D36F
[09:25:46] - Machine ID: 2
[09:25:46] 
[09:25:47] Loaded queue successfully.
[09:25:47] 
[09:25:47] + Processing work unit
[09:25:47] Core required: FahCore_a4.exe
[09:25:47] Core found.
[09:25:47] Working on queue slot 06 [May 20 09:25:47 UTC]
[09:25:47] + Working ...
[09:25:47] 
[09:25:47] *------------------------------*
[09:25:47] Folding@Home Gromacs GB Core
[09:25:47] Version 2.27 (Dec. 15, 2010)
[09:25:47] 
[09:25:47] Preparing to commence simulation
[09:25:47] - Looking at optimizations...
[09:25:47] - Files status OK
[09:25:47] - Expanded 51964 -> 192840 (decompressed 371.1 percent)
[09:25:47] Called DecompressByteArray: compressed_data_size=51964 data_size=192840, decompressed_data_size=192840 diff=0
[09:25:47] - Digital signature verified
[09:25:47] 
[09:25:47] Project: 10081 (Run 79, Clone 0, Gen 23)
[09:25:47] 
[09:25:48] Assembly optimizations on if available.
[09:25:48] Entering M.D.
[09:25:54] Using Gromacs checkpoints
[09:25:54] Mapping NT from 1 to 1 
[09:25:54] Resuming from checkpoint
[09:25:54] Verified work/wudata_06.log
[09:25:55] Verified work/wudata_06.trr
[09:25:55] Verified work/wudata_06.xtc
[09:25:55] Verified work/wudata_06.edr
[09:25:55] Completed 8000001 out of 10000000 steps  (80%)
[09:45:21] Completed 8100000 out of 10000000 steps  (81%)
[10:06:29] Completed 8200000 out of 10000000 steps  (82%)
[10:26:58] Completed 8300000 out of 10000000 steps  (83%)
[10:47:27] Completed 8400000 out of 10000000 steps  (84%)
[11:07:32] Completed 8500000 out of 10000000 steps  (85%)
[11:27:58] Completed 8600000 out of 10000000 steps  (86%)
[11:48:42] Completed 8700000 out of 10000000 steps  (87%)
[12:09:27] Completed 8800000 out of 10000000 steps  (88%)
[12:29:48] Completed 8900000 out of 10000000 steps  (89%)
[12:52:23] Completed 9000000 out of 10000000 steps  (90%)
[13:13:50] Completed 9100000 out of 10000000 steps  (91%)
[13:38:09] Completed 9200000 out of 10000000 steps  (92%)
[13:59:30] Completed 9300000 out of 10000000 steps  (93%)
[14:20:56] Completed 9400000 out of 10000000 steps  (94%)

Folding@Home Client Shutdown.


--- Opening Log file [May 23 11:28:34 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[11:28:34] - Ask before connecting: No
[11:28:34] - User name: OAP_Watty (Team 61360)
[11:28:34] - User ID: 3DD2044A5C53D36F
[11:28:34] - Machine ID: 2
[11:28:34] 
[11:28:35] Loaded queue successfully.
[11:28:35] Unit 6's deadline (May 22 12:25) has passed.
[11:28:43] - Preparing to get new work unit...
[11:28:43] + Attempting to get work packet
[11:28:43] - Connecting to assignment server
[11:28:44] - Successful: assigned to (171.67.108.33).
[11:28:45] + News From Folding@Home: Welcome to Folding@Home
[11:28:45] Loaded queue successfully.
[11:28:50] + Closed connections
[11:28:50] 
[11:28:50] + Processing work unit
[11:28:50] Core required: FahCore_78.exe
[11:28:50] Core found.
[11:28:50] Working on queue slot 07 [May 23 11:28:50 UTC]
[11:28:50] + Working ...
[11:28:51] 
[11:28:51] *------------------------------*
[11:28:51] Folding@Home Gromacs Core
[11:28:51] Version 1.90 (March 8, 2006)
[11:28:51] 
[11:28:51] Preparing to commence simulation
[11:28:51] - Looking at optimizations...
[11:28:51] - Created dyn
[11:28:51] - Files status OK
[11:28:51] - Expanded 371603 -> 1798060 (decompressed 483.8 percent)
[11:28:51] - Starting from initial work packet
[11:28:51] 
[11:28:51] Project: 6885 (Run 194, Clone 0, Gen 105)
[11:28:51] 
[11:28:51] Assembly optimizations on if available.
[11:28:51] Entering M.D.
[11:28:58] Protein: ALZHEIMERS DISEASE AMYLOID
[11:28:58] 
[11:28:58] Writing local files
[11:29:46] Extra SSE boost OK.
[11:29:46] Writing local files
[11:29:46] Completed 0 out of 250000 steps  (0%)
[11:35:10] Writing local files
[11:35:10] Completed 2500 out of 250000 steps  (1%)
[11:40:24] Writing local files
[11:40:25] Completed 5000 out of 250000 steps  (2%)
[11:45:23] Writing local files
[11:45:23] Completed 7500 out of 250000 steps  (3%)
[11:50:28] Writing local files
[11:50:28] Completed 10000 out of 250000 steps  (4%)
[11:55:35] Writing local files
[11:55:35] Completed 12500 out of 250000 steps  (5%)
[12:00:42] Writing local files
[12:00:42] Completed 15000 out of 250000 steps  (6%)
[12:05:47] Writing local files
[12:05:47] Completed 17500 out of 250000 steps  (7%)
[12:10:53] Writing local files
[12:10:53] Completed 20000 out of 250000 steps  (8%)
[12:16:12] Writing local files
[12:16:12] Completed 22500 out of 250000 steps  (9%)
[12:22:09] Writing local files
[12:22:09] Completed 25000 out of 250000 steps  (10%)

Folding@Home Client Shutdown.


--- Opening Log file [May 26 11:29:10 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[11:29:10] - Ask before connecting: No
[11:29:10] - User name: OAP_Watty (Team 61360)
[11:29:10] - User ID: 3DD2044A5C53D36F
[11:29:10] - Machine ID: 2
[11:29:10] 
[11:29:10] Loaded queue successfully.
[11:29:10] 
[11:29:10] + Processing work unit
[11:29:10] Core required: FahCore_78.exe
[11:29:10] Core found.
[11:29:10] Working on queue slot 07 [May 26 11:29:10 UTC]
[11:29:10] + Working ...
[11:29:10] 
[11:29:10] *------------------------------*
[11:29:10] Folding@Home Gromacs Core
[11:29:10] Version 1.90 (March 8, 2006)
[11:29:10] 
[11:29:10] Preparing to commence simulation
[11:29:10] - Looking at optimizations...
[11:29:10] - Files status OK
[11:29:10] - Expanded 371603 -> 1798060 (decompressed 483.8 percent)
[11:29:10] 
[11:29:10] Project: 6885 (Run 194, Clone 0, Gen 105)
[11:29:10] 
[11:29:10] Assembly optimizations on if available.
[11:29:10] Entering M.D.
[11:29:31] (Starting from checkpoint)
[11:29:31] Protein: ALZHEIMERS DISEASE AMYLOID
[11:29:31] 
[11:29:31] Writing local files
[11:30:22] Completed 25000 out of 250000 steps  (10%)
[11:30:22] Extra SSE boost OK.
[11:35:41] Writing local files
[11:35:41] Completed 27500 out of 250000 steps  (11%)
[11:41:09] Writing local files
[11:41:09] Completed 30000 out of 250000 steps  (12%)
[11:46:30] Writing local files
[11:46:30] Completed 32500 out of 250000 steps  (13%)
[11:51:38] Writing local files
[11:51:38] Completed 35000 out of 250000 steps  (14%)
[11:56:50] Writing local files
[11:56:50] Completed 37500 out of 250000 steps  (15%)
[12:01:59] Writing local files
[12:01:59] Completed 40000 out of 250000 steps  (16%)
[12:07:13] Writing local files
[12:07:13] Completed 42500 out of 250000 steps  (17%)
[12:12:28] Writing local files
[12:12:28] Completed 45000 out of 250000 steps  (18%)
[12:17:37] Writing local files
[12:17:37] Completed 47500 out of 250000 steps  (19%)
[12:22:48] Writing local files
[12:22:49] Completed 50000 out of 250000 steps  (20%)
[12:28:09] Writing local files
[12:28:09] Completed 52500 out of 250000 steps  (21%)
[12:33:46] Writing local files
[12:33:46] Completed 55000 out of 250000 steps  (22%)
[12:39:01] Writing local files
[12:39:01] Completed 57500 out of 250000 steps  (23%)
[12:44:13] Writing local files
[12:44:13] Completed 60000 out of 250000 steps  (24%)
[12:49:25] Writing local files
[12:49:25] Completed 62500 out of 250000 steps  (25%)
[12:56:06] Writing local files
[12:56:06] Completed 65000 out of 250000 steps  (26%)
[13:01:58] Writing local files
[13:01:58] Completed 67500 out of 250000 steps  (27%)
[13:07:44] Writing local files
[13:07:44] Completed 70000 out of 250000 steps  (28%)
[13:13:41] Writing local files
[13:13:41] Completed 72500 out of 250000 steps  (29%)
[13:19:26] Writing local files
[13:19:26] Completed 75000 out of 250000 steps  (30%)
[13:24:54] Writing local files
[13:24:54] Completed 77500 out of 250000 steps  (31%)
[13:30:14] Writing local files
[13:30:14] Completed 80000 out of 250000 steps  (32%)
[13:35:58] Writing local files
[13:35:58] Completed 82500 out of 250000 steps  (33%)
[13:41:37] Writing local files
[13:41:37] Completed 85000 out of 250000 steps  (34%)
[13:47:24] Writing local files
[13:47:24] Completed 87500 out of 250000 steps  (35%)
[13:53:03] Writing local files
[13:53:03] Completed 90000 out of 250000 steps  (36%)
[13:58:52] Writing local files
[13:58:52] Completed 92500 out of 250000 steps  (37%)
[14:05:52] Writing local files
[14:05:53] Completed 95000 out of 250000 steps  (38%)
[14:12:13] Writing local files
[14:12:13] Completed 97500 out of 250000 steps  (39%)
[14:18:28] Writing local files
[14:18:28] Completed 100000 out of 250000 steps  (40%)
[14:24:16] Writing local files
[14:24:16] Completed 102500 out of 250000 steps  (41%)
[14:30:19] Writing local files
[14:30:19] Completed 105000 out of 250000 steps  (42%)
[14:36:10] Writing local files
[14:36:10] Completed 107500 out of 250000 steps  (43%)
[14:41:59] Writing local files
[14:41:59] Completed 110000 out of 250000 steps  (44%)
[14:47:58] Writing local files
[14:47:58] Completed 112500 out of 250000 steps  (45%)
[14:53:56] Writing local files
[14:53:56] Completed 115000 out of 250000 steps  (46%)
[15:00:30] Writing local files
[15:00:30] Completed 117500 out of 250000 steps  (47%)
[15:06:06] Writing local files
[15:06:06] Completed 120000 out of 250000 steps  (48%)
[15:11:54] Writing local files
[15:11:54] Completed 122500 out of 250000 steps  (49%)
[15:17:50] Writing local files
[15:17:50] Completed 125000 out of 250000 steps  (50%)
[15:23:33] Writing local files
[15:23:33] Completed 127500 out of 250000 steps  (51%)
[15:29:25] Writing local files
[15:29:25] Completed 130000 out of 250000 steps  (52%)

Folding@Home Client Shutdown.


--- Opening Log file [May 31 08:48:09 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[08:48:10] - Ask before connecting: No
[08:48:10] - User name: OAP_Watty (Team 61360)
[08:48:10] - User ID: 3DD2044A5C53D36F
[08:48:10] - Machine ID: 2
[08:48:10] 
[08:48:11] Loaded queue successfully.
[08:48:11] 
[08:48:11] + Processing work unit
[08:48:11] Core required: FahCore_78.exe
[08:48:11] Core found.
[08:48:12] Working on queue slot 07 [May 31 08:48:12 UTC]
[08:48:12] + Working ...
[08:48:20] 
[08:48:20] *------------------------------*
[08:48:20] Folding@Home Gromacs Core
[08:48:20] Version 1.90 (March 8, 2006)
[08:48:20] 
[08:48:20] Preparing to commence simulation
[08:48:20] - Looking at optimizations...
[08:48:20] - Files status OK
[08:48:28] - Expanded 371603 -> 1798060 (decompressed 483.8 percent)
[08:48:35] 
[08:48:35] Project: 6885 (Run 194, Clone 0, Gen 105)
[08:48:35] 
[08:48:40] Assembly optimizations on if available.
[08:48:40] Entering M.D.
[08:49:08] (Starting from checkpoint)
[08:49:09] Protein: ALZHEIMERS DISEASE AMYLOID
[08:49:09] 
[08:49:10] Writing local files
[08:50:52] Completed 130000 out of 250000 steps  (52%)
[08:50:53] Extra SSE boost OK.
[08:56:48] Writing local files
[08:56:48] Completed 132500 out of 250000 steps  (53%)
[09:02:12] Writing local files
[09:02:13] Completed 135000 out of 250000 steps  (54%)
[09:07:26] Writing local files
[09:07:26] Completed 137500 out of 250000 steps  (55%)
[09:13:11] Writing local files
[09:13:11] Completed 140000 out of 250000 steps  (56%)
[09:18:26] Writing local files
[09:18:26] Completed 142500 out of 250000 steps  (57%)
[09:25:04] Writing local files
[09:25:04] Completed 145000 out of 250000 steps  (58%)
[09:31:25] Writing local files
[09:31:25] Completed 147500 out of 250000 steps  (59%)
[09:37:53] Writing local files
[09:37:54] Completed 150000 out of 250000 steps  (60%)
[09:45:02] Writing local files
[09:45:02] Completed 152500 out of 250000 steps  (61%)
[09:51:01] Writing local files
[09:51:02] Completed 155000 out of 250000 steps  (62%)
[09:57:15] Writing local files
[09:57:15] Completed 157500 out of 250000 steps  (63%)
[10:03:05] Writing local files
[10:03:05] Completed 160000 out of 250000 steps  (64%)
[10:08:29] Writing local files
[10:08:29] Completed 162500 out of 250000 steps  (65%)
[10:14:05] Writing local files
[10:14:05] Completed 165000 out of 250000 steps  (66%)
[10:19:43] Writing local files
[10:19:43] Completed 167500 out of 250000 steps  (67%)
[10:25:21] Writing local files
[10:25:21] Completed 170000 out of 250000 steps  (68%)
[10:31:13] Writing local files
[10:31:13] Completed 172500 out of 250000 steps  (69%)
[10:39:07] Writing local files
[10:39:07] Completed 175000 out of 250000 steps  (70%)
[10:45:22] Writing local files
[10:45:23] Completed 177500 out of 250000 steps  (71%)
[10:51:14] Writing local files
[10:51:14] Completed 180000 out of 250000 steps  (72%)
[10:57:56] Writing local files
[10:57:57] Completed 182500 out of 250000 steps  (73%)

Folding@Home Client Shutdown.


--- Opening Log file [June 1 08:49:23 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[08:49:23] - Ask before connecting: No
[08:49:23] - User name: OAP_Watty (Team 61360)
[08:49:23] - User ID: 3DD2044A5C53D36F
[08:49:23] - Machine ID: 2
[08:49:23] 
[08:49:25] Loaded queue successfully.
[08:49:25] 
[08:49:25] + Processing work unit
[08:49:25] Core required: FahCore_78.exe
[08:49:25] Core found.
[08:49:25] Working on queue slot 07 [June 1 08:49:25 UTC]
[08:49:25] + Working ...
[08:49:28] 
[08:49:28] *------------------------------*
[08:49:28] Folding@Home Gromacs Core
[08:49:28] Version 1.90 (March 8, 2006)
[08:49:28] 
[08:49:28] Preparing to commence simulation
[08:49:28] - Looking at optimizations...
[08:49:29] - Files status OK
[08:49:30] - Expanded 371603 -> 1798060 (decompressed 483.8 percent)
[08:49:34] 
[08:49:34] Project: 6885 (Run 194, Clone 0, Gen 105)
[08:49:34] 
[08:49:35] Assembly optimizations on if available.
[08:49:35] Entering M.D.
[08:49:57] (Starting from checkpoint)
[08:49:58] Protein: ALZHEIMERS DISEASE AMYLOID
[08:49:58] 
[08:49:58] Writing local files
[08:51:20] Completed 182500 out of 250000 steps  (73%)
[08:51:24] Extra SSE boost OK.
[08:58:30] Writing local files
[08:58:30] Completed 185000 out of 250000 steps  (74%)
[09:03:52] Writing local files
[09:03:52] Completed 187500 out of 250000 steps  (75%)
[09:09:09] Writing local files
[09:09:09] Completed 190000 out of 250000 steps  (76%)
[09:14:28] Writing local files
[09:14:28] Completed 192500 out of 250000 steps  (77%)
[09:20:12] Writing local files
[09:20:12] Completed 195000 out of 250000 steps  (78%)
[09:27:30] Writing local files
[09:27:30] Completed 197500 out of 250000 steps  (79%)
[09:33:49] Writing local files
[09:33:49] Completed 200000 out of 250000 steps  (80%)
[09:39:55] Writing local files
[09:39:55] Completed 202500 out of 250000 steps  (81%)
[09:45:59] Writing local files
[09:45:59] Completed 205000 out of 250000 steps  (82%)
[09:51:28] Writing local files
[09:51:29] Completed 207500 out of 250000 steps  (83%)
[09:56:53] Writing local files
[09:56:53] Completed 210000 out of 250000 steps  (84%)
[10:02:26] Writing local files
[10:02:26] Completed 212500 out of 250000 steps  (85%)
[10:08:16] Writing local files
[10:08:16] Completed 215000 out of 250000 steps  (86%)
[10:13:54] Writing local files
[10:13:54] Completed 217500 out of 250000 steps  (87%)
[10:19:44] Writing local files
[10:19:44] Completed 220000 out of 250000 steps  (88%)
[10:25:02] Writing local files
[10:25:02] Completed 222500 out of 250000 steps  (89%)
[10:30:04] Writing local files
[10:30:05] Completed 225000 out of 250000 steps  (90%)
[10:35:26] Writing local files
[10:35:26] Completed 227500 out of 250000 steps  (91%)
[10:40:39] Writing local files
[10:40:39] Completed 230000 out of 250000 steps  (92%)
[10:46:26] Writing local files
[10:46:26] Completed 232500 out of 250000 steps  (93%)
[10:51:41] Writing local files
[10:51:41] Completed 235000 out of 250000 steps  (94%)
[10:57:02] Writing local files
[10:57:02] Completed 237500 out of 250000 steps  (95%)
[11:02:46] Writing local files
[11:02:46] Completed 240000 out of 250000 steps  (96%)
[11:08:18] Writing local files
[11:08:19] Completed 242500 out of 250000 steps  (97%)
[11:13:46] Writing local files
[11:13:46] Completed 245000 out of 250000 steps  (98%)
[11:19:29] Writing local files
[11:19:29] Completed 247500 out of 250000 steps  (99%)
[11:25:29] Writing local files
[11:25:29] Completed 250000 out of 250000 steps  (100%)
[11:25:29] Writing final coordinates.
[11:25:29] Past main M.D. loop
[11:26:29] 
[11:26:29] Finished Work Unit:
[11:26:29] - Reading up to 292752 from "work/wudata_07.arc": Read 292752
[11:26:29] - Reading up to 260460 from "work/wudata_07.xtc": Read 260460
[11:26:29] goefile size: 0
[11:26:29] logfile size: 46059
[11:26:29] Leaving Run
[11:26:31] - Writing 605179 bytes of core data to disk...
[11:26:32] Done: 604667 -> 561553 (compressed to 92.8 percent)
[11:26:32]   ... Done.
[11:26:32] - Shutting down core
[11:26:32] 
[11:26:32] Folding@home Core Shutdown: FINISHED_UNIT
[11:26:35] CoreStatus = 64 (100)
[11:26:35] Sending work to server
[11:26:35] Project: 6885 (Run 194, Clone 0, Gen 105)


[11:26:35] + Attempting to send results [June 1 11:26:35 UTC]
[11:26:41] + Results successfully sent
[11:26:41] Thank you for your contribution to Folding@Home.
[11:26:41] + Number of Units Completed: 58

[11:26:45] - Preparing to get new work unit...
[11:26:45] + Attempting to get work packet
[11:26:45] - Connecting to assignment server
[11:26:47] - Successful: assigned to (129.74.85.15).
[11:26:47] + News From Folding@Home: Welcome to Folding@Home
[11:26:47] Loaded queue successfully.
[11:26:48] + Closed connections
[11:26:48] 
[11:26:48] + Processing work unit
[11:26:48] Core required: FahCore_a4.exe
[11:26:48] Core found.
[11:26:48] Working on queue slot 08 [June 1 11:26:48 UTC]
[11:26:48] + Working ...
[11:26:48] 
[11:26:48] *------------------------------*
[11:26:48] Folding@Home Gromacs GB Core
[11:26:48] Version 2.27 (Dec. 15, 2010)
[11:26:48] 
[11:26:48] Preparing to commence simulation
[11:26:48] - Looking at optimizations...
[11:26:48] - Created dyn
[11:26:48] - Files status OK
[11:26:48] - Expanded 52833 -> 195708 (decompressed 370.4 percent)
[11:26:48] Called DecompressByteArray: compressed_data_size=52833 data_size=195708, decompressed_data_size=195708 diff=0
[11:26:48] - Digital signature verified
[11:26:48] 
[11:26:48] Project: 10076 (Run 243, Clone 0, Gen 31)
[11:26:48] 
[11:26:48] Assembly optimizations on if available.
[11:26:48] Entering M.D.
[11:26:54] Mapping NT from 1 to 1 
[11:26:55] Completed 0 out of 10000000 steps  (0%)
[11:44:59] Completed 100000 out of 10000000 steps  (1%)
[12:02:58] Completed 200000 out of 10000000 steps  (2%)
[12:21:02] Completed 300000 out of 10000000 steps  (3%)
[12:39:54] Completed 400000 out of 10000000 steps  (4%)
[12:59:51] Completed 500000 out of 10000000 steps  (5%)
[13:19:11] Completed 600000 out of 10000000 steps  (6%)
[13:39:01] Completed 700000 out of 10000000 steps  (7%)
[13:59:22] Completed 800000 out of 10000000 steps  (8%)
[14:19:37] Completed 900000 out of 10000000 steps  (9%)
[14:40:32] Completed 1000000 out of 10000000 steps  (10%)
[15:02:51] Completed 1100000 out of 10000000 steps  (11%)
[15:23:17] Completed 1200000 out of 10000000 steps  (12%)

Folding@Home Client Shutdown.

Posted: **Thu Jun 09, 2011 11:18 pm**

P5-133XL's suggestions are along the lines of what I was going to say. You may have some background task gumming up the works, but to not finish something with a one-month deadline... maybe the computer is going to sleep? Otherwise, you really don't have it turned on that much of the time after all. Your log and what it indicates as far as TPF will be useful as others have said.

I'm sure you know how to check how many background tasks you have going, and it's worth looking into whether one (or many) of those is/are eating up a lot of clock cycles.

(edit) yeah, it looks like the client is frequently starting up, then shutting down not to long after. That is likely part of the issue. Looking at the time stamps in your log, it appears you are only running Folding for a few hours per day, so it's reasonable to expect the machine to not always meet deadlines.

Posted: **Thu Jun 09, 2011 11:18 pm**

fahlog.txt Starts with unit started on June 1st (see fahprevlog.txt) but it expired June 9th when I was at 94% which is typical!

Code: Select all


--- Opening Log file [June 2 09:02:46 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[09:02:46] - Ask before connecting: No
[09:02:46] - User name: OAP_Watty (Team 61360)
[09:02:46] - User ID: 3DD2044A5C53D36F
[09:02:46] - Machine ID: 2
[09:02:46] 
[09:02:48] Loaded queue successfully.
[09:02:48] 
[09:02:48] + Processing work unit
[09:02:48] Core required: FahCore_a4.exe
[09:02:48] Core found.
[09:02:48] Working on queue slot 08 [June 2 09:02:48 UTC]
[09:02:48] + Working ...
[09:02:51] 
[09:02:51] *------------------------------*
[09:02:51] Folding@Home Gromacs GB Core
[09:02:51] Version 2.27 (Dec. 15, 2010)
[09:02:51] 
[09:02:51] Preparing to commence simulation
[09:02:51] - Looking at optimizations...
[09:02:51] - Files status OK
[09:02:51] - Expanded 52833 -> 195708 (decompressed 370.4 percent)
[09:02:51] Called DecompressByteArray: compressed_data_size=52833 data_size=195708, decompressed_data_size=195708 diff=0
[09:02:51] - Digital signature verified
[09:02:51] 
[09:02:51] Project: 10076 (Run 243, Clone 0, Gen 31)
[09:02:51] 
[09:02:52] Assembly optimizations on if available.
[09:02:52] Entering M.D.
[09:02:59] Using Gromacs checkpoints
[09:03:00] Mapping NT from 1 to 1 
[09:03:11] Resuming from checkpoint
[09:03:11] Verified work/wudata_08.log
[09:03:14] Verified work/wudata_08.trr
[09:03:14] Verified work/wudata_08.xtc
[09:03:14] Verified work/wudata_08.edr
[09:03:16] Completed 1200001 out of 10000000 steps  (12%)
[09:23:53] Completed 1300000 out of 10000000 steps  (13%)
[09:42:48] Completed 1400000 out of 10000000 steps  (14%)
[10:01:09] Completed 1500000 out of 10000000 steps  (15%)
[10:22:41] Completed 1600000 out of 10000000 steps  (16%)
[10:44:43] Completed 1700000 out of 10000000 steps  (17%)
[11:03:54] Completed 1800000 out of 10000000 steps  (18%)
[11:24:11] Completed 1900000 out of 10000000 steps  (19%)
[11:43:52] Completed 2000000 out of 10000000 steps  (20%)
[12:02:46] Completed 2100000 out of 10000000 steps  (21%)
[12:21:31] Completed 2200000 out of 10000000 steps  (22%)
[12:43:00] Completed 2300000 out of 10000000 steps  (23%)
[13:01:28] Completed 2400000 out of 10000000 steps  (24%)
[13:19:39] Completed 2500000 out of 10000000 steps  (25%)
[13:41:20] Completed 2600000 out of 10000000 steps  (26%)
[14:02:53] Completed 2700000 out of 10000000 steps  (27%)

Folding@Home Client Shutdown.


--- Opening Log file [June 6 08:51:49 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[08:51:50] - Ask before connecting: No
[08:51:50] - User name: OAP_Watty (Team 61360)
[08:51:50] - User ID: 3DD2044A5C53D36F
[08:51:50] - Machine ID: 2
[08:51:50] 
[08:51:50] Loaded queue successfully.
[08:51:50] 
[08:51:50] + Processing work unit
[08:51:50] Core required: FahCore_a4.exe
[08:51:50] Core found.
[08:51:52] Working on queue slot 08 [June 6 08:51:52 UTC]
[08:51:52] + Working ...
[08:52:00] 
[08:52:00] *------------------------------*
[08:52:00] Folding@Home Gromacs GB Core
[08:52:00] Version 2.27 (Dec. 15, 2010)
[08:52:00] 
[08:52:00] Preparing to commence simulation
[08:52:00] - Looking at optimizations...
[08:52:00] - Files status OK
[08:52:01] - Expanded 52833 -> 195708 (decompressed 370.4 percent)
[08:52:01] Called DecompressByteArray: compressed_data_size=52833 data_size=195708, decompressed_data_size=195708 diff=0
[08:52:01] - Digital signature verified
[08:52:01] 
[08:52:01] Project: 10076 (Run 243, Clone 0, Gen 31)
[08:52:01] 
[08:52:02] Assembly optimizations on if available.
[08:52:02] Entering M.D.
[08:52:12] Using Gromacs checkpoints
[08:52:12] Mapping NT from 1 to 1 
[08:52:31] Resuming from checkpoint
[08:52:31] Verified work/wudata_08.log
[08:52:31] Verified work/wudata_08.trr
[08:52:31] Verified work/wudata_08.xtc
[08:52:31] Verified work/wudata_08.edr
[08:52:33] Completed 2700001 out of 10000000 steps  (27%)
[09:12:59] Completed 2800000 out of 10000000 steps  (28%)
[09:32:47] Completed 2900000 out of 10000000 steps  (29%)
[09:51:59] Completed 3000000 out of 10000000 steps  (30%)
[10:10:27] Completed 3100000 out of 10000000 steps  (31%)
[10:28:49] Completed 3200000 out of 10000000 steps  (32%)
[10:47:55] Completed 3300000 out of 10000000 steps  (33%)
[11:07:22] Completed 3400000 out of 10000000 steps  (34%)
[11:26:59] Completed 3500000 out of 10000000 steps  (35%)
[11:45:39] Completed 3600000 out of 10000000 steps  (36%)
[12:04:54] Completed 3700000 out of 10000000 steps  (37%)
[12:24:08] Completed 3800000 out of 10000000 steps  (38%)
[12:43:12] Completed 3900000 out of 10000000 steps  (39%)
[13:04:53] Completed 4000000 out of 10000000 steps  (40%)
[13:24:24] Completed 4100000 out of 10000000 steps  (41%)
[13:42:49] Completed 4200000 out of 10000000 steps  (42%)
[14:01:37] Completed 4300000 out of 10000000 steps  (43%)
[14:21:02] Completed 4400000 out of 10000000 steps  (44%)
[14:39:30] Completed 4500000 out of 10000000 steps  (45%)
[14:57:23] Completed 4600000 out of 10000000 steps  (46%)
[15:16:51] Completed 4700000 out of 10000000 steps  (47%)

Folding@Home Client Shutdown.


--- Opening Log file [June 7 09:02:05 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[09:02:05] - Ask before connecting: No
[09:02:05] - User name: OAP_Watty (Team 61360)
[09:02:05] - User ID: 3DD2044A5C53D36F
[09:02:05] - Machine ID: 2
[09:02:05] 
[09:02:06] Loaded queue successfully.
[09:02:06] 
[09:02:06] + Processing work unit
[09:02:06] Core required: FahCore_a4.exe
[09:02:06] Core found.
[09:02:06] Working on queue slot 08 [June 7 09:02:06 UTC]
[09:02:06] + Working ...
[09:02:19] 
[09:02:19] *------------------------------*
[09:02:19] Folding@Home Gromacs GB Core
[09:02:19] Version 2.27 (Dec. 15, 2010)
[09:02:19] 
[09:02:19] Preparing to commence simulation
[09:02:19] - Looking at optimizations...
[09:02:19] - Files status OK
[09:02:21] - Expanded 52833 -> 195708 (decompressed 370.4 percent)
[09:02:21] Called DecompressByteArray: compressed_data_size=52833 data_size=195708, decompressed_data_size=195708 diff=0
[09:02:21] - Digital signature verified
[09:02:21] 
[09:02:21] Project: 10076 (Run 243, Clone 0, Gen 31)
[09:02:21] 
[09:02:21] Assembly optimizations on if available.
[09:02:21] Entering M.D.
[09:02:28] Using Gromacs checkpoints
[09:02:28] Mapping NT from 1 to 1 
[09:02:39] Resuming from checkpoint
[09:02:40] Verified work/wudata_08.log
[09:02:40] Verified work/wudata_08.trr
[09:02:43] Verified work/wudata_08.xtc
[09:02:44] Verified work/wudata_08.edr
[09:02:48] Completed 4700001 out of 10000000 steps  (47%)
[09:24:55] Completed 4800000 out of 10000000 steps  (48%)
[09:43:09] Completed 4900000 out of 10000000 steps  (49%)
[10:00:53] Completed 5000000 out of 10000000 steps  (50%)
[10:19:42] Completed 5100000 out of 10000000 steps  (51%)
[10:38:03] Completed 5200000 out of 10000000 steps  (52%)
[10:56:29] Completed 5300000 out of 10000000 steps  (53%)
[11:14:44] Completed 5400000 out of 10000000 steps  (54%)
[11:32:00] Completed 5500000 out of 10000000 steps  (55%)
[11:49:05] Completed 5600000 out of 10000000 steps  (56%)
[12:06:11] Completed 5700000 out of 10000000 steps  (57%)
[12:25:35] Completed 5800000 out of 10000000 steps  (58%)
[12:44:31] Completed 5900000 out of 10000000 steps  (59%)
[13:07:11] Completed 6000000 out of 10000000 steps  (60%)
[13:30:50] Completed 6100000 out of 10000000 steps  (61%)
[13:50:01] Completed 6200000 out of 10000000 steps  (62%)
[14:08:34] Completed 6300000 out of 10000000 steps  (63%)
[14:26:51] Completed 6400000 out of 10000000 steps  (64%)
[14:52:17] Completed 6500000 out of 10000000 steps  (65%)
[15:09:57] Completed 6600000 out of 10000000 steps  (66%)
[15:27:49] Completed 6700000 out of 10000000 steps  (67%)

Folding@Home Client Shutdown.


--- Opening Log file [June 8 08:58:10 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[08:58:10] - Ask before connecting: No
[08:58:10] - User name: OAP_Watty (Team 61360)
[08:58:10] - User ID: 3DD2044A5C53D36F
[08:58:10] - Machine ID: 2
[08:58:10] 
[08:58:13] Loaded queue successfully.
[08:58:13] 
[08:58:13] + Processing work unit
[08:58:13] Core required: FahCore_a4.exe
[08:58:13] Core found.
[08:58:14] Working on queue slot 08 [June 8 08:58:14 UTC]
[08:58:14] + Working ...
[08:59:02] 
[08:59:02] *------------------------------*
[08:59:02] Folding@Home Gromacs GB Core
[08:59:02] Version 2.27 (Dec. 15, 2010)
[08:59:02] 
[08:59:02] Preparing to commence simulation
[08:59:02] - Looking at optimizations...
[08:59:03] - Files status OK
[08:59:03] - Expanded 52833 -> 195708 (decompressed 370.4 percent)
[08:59:03] Called DecompressByteArray: compressed_data_size=52833 data_size=195708, decompressed_data_size=195708 diff=0
[08:59:03] - Digital signature verified
[08:59:03] 
[08:59:03] Project: 10076 (Run 243, Clone 0, Gen 31)
[08:59:03] 
[08:59:04] Assembly optimizations on if available.
[08:59:05] Entering M.D.
[08:59:12] Using Gromacs checkpoints
[08:59:14] Mapping NT from 1 to 1 
[08:59:43] Resuming from checkpoint
[08:59:44] Verified work/wudata_08.log
[08:59:52] Verified work/wudata_08.trr
[08:59:54] Verified work/wudata_08.xtc
[08:59:55] Verified work/wudata_08.edr
[08:59:58] Completed 6700001 out of 10000000 steps  (67%)
[09:22:08] Completed 6800000 out of 10000000 steps  (68%)
[09:41:48] Completed 6900000 out of 10000000 steps  (69%)
[10:07:48] Completed 7000000 out of 10000000 steps  (70%)
[10:27:33] Completed 7100000 out of 10000000 steps  (71%)
[10:46:43] Completed 7200000 out of 10000000 steps  (72%)
[11:04:34] Completed 7300000 out of 10000000 steps  (73%)
[11:23:08] Completed 7400000 out of 10000000 steps  (74%)
[11:41:11] Completed 7500000 out of 10000000 steps  (75%)
[11:58:38] Completed 7600000 out of 10000000 steps  (76%)
[12:15:46] Completed 7700000 out of 10000000 steps  (77%)
[12:32:48] Completed 7800000 out of 10000000 steps  (78%)
[12:49:49] Completed 7900000 out of 10000000 steps  (79%)
[13:06:51] Completed 8000000 out of 10000000 steps  (80%)
[13:23:53] Completed 8100000 out of 10000000 steps  (81%)
[13:42:51] Completed 8200000 out of 10000000 steps  (82%)
[14:02:42] Completed 8300000 out of 10000000 steps  (83%)
[14:21:11] Completed 8400000 out of 10000000 steps  (84%)
[14:39:38] Completed 8500000 out of 10000000 steps  (85%)
[14:58:06] Completed 8600000 out of 10000000 steps  (86%)
[15:16:05] Completed 8700000 out of 10000000 steps  (87%)

Folding@Home Client Shutdown.


--- Opening Log file [June 9 09:12:18 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[09:12:18] - Ask before connecting: No
[09:12:18] - User name: OAP_Watty (Team 61360)
[09:12:18] - User ID: 3DD2044A5C53D36F
[09:12:18] - Machine ID: 2
[09:12:18] 
[09:12:18] Loaded queue successfully.
[09:12:18] 
[09:12:18] + Processing work unit
[09:12:18] Core required: FahCore_a4.exe
[09:12:18] Core found.
[09:12:18] Working on queue slot 08 [June 9 09:12:18 UTC]
[09:12:18] + Working ...
[09:12:18] 
[09:12:18] *------------------------------*
[09:12:18] Folding@Home Gromacs GB Core
[09:12:18] Version 2.27 (Dec. 15, 2010)
[09:12:18] 
[09:12:18] Preparing to commence simulation
[09:12:18] - Looking at optimizations...
[09:12:18] - Files status OK
[09:12:18] - Expanded 52833 -> 195708 (decompressed 370.4 percent)
[09:12:18] Called DecompressByteArray: compressed_data_size=52833 data_size=195708, decompressed_data_size=195708 diff=0
[09:12:19] - Digital signature verified
[09:12:19] 
[09:12:19] Project: 10076 (Run 243, Clone 0, Gen 31)
[09:12:19] 
[09:12:19] Assembly optimizations on if available.
[09:12:19] Entering M.D.
[09:12:25] Using Gromacs checkpoints
[09:12:25] Mapping NT from 1 to 1 
[09:12:25] Resuming from checkpoint
[09:12:25] Verified work/wudata_08.log
[09:12:25] Verified work/wudata_08.trr
[09:12:25] Verified work/wudata_08.xtc
[09:12:25] Verified work/wudata_08.edr
[09:12:26] Completed 8700001 out of 10000000 steps  (87%)
[09:32:33] Completed 8800000 out of 10000000 steps  (88%)
[09:52:49] Completed 8900000 out of 10000000 steps  (89%)
[10:11:49] Completed 9000000 out of 10000000 steps  (90%)
[10:33:23] Completed 9100000 out of 10000000 steps  (91%)
[10:55:22] Completed 9200000 out of 10000000 steps  (92%)
[11:18:17] Completed 9300000 out of 10000000 steps  (93%)
[11:43:01] Completed 9400000 out of 10000000 steps  (94%)
[11:43:01] Unit 8's deadline (June 9 11:26) has passed.
[11:43:01] Going to interrupt core and move on to next unit...
[12:04:45] Completed 9500000 out of 10000000 steps  (95%)
[12:04:45] Unit 8's deadline (June 9 11:26) has passed.
[12:04:45] Going to interrupt core and move on to next unit...
[12:04:49] CoreStatus = 3 (3)
[12:04:49] Client-core communications error: ERROR 0x3
[12:04:49] This is a sign of more serious problems, shutting down.


--- Opening Log file [June 9 12:07:50 UTC] 


# Windows CPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\folding\2
Executable: Folding@home-Win32-x86.exe


[12:07:50] - Ask before connecting: No
[12:07:50] - User name: OAP_Watty (Team 61360)
[12:07:50] - User ID: 3DD2044A5C53D36F
[12:07:50] - Machine ID: 2
[12:07:50] 
[12:07:50] Loaded queue successfully.
[12:07:50] Unit 8's deadline (June 9 11:26) has passed.
[12:08:04] - Preparing to get new work unit...
[12:08:04] + Attempting to get work packet
[12:08:04] - Connecting to assignment server
[12:08:05] - Successful: assigned to (129.74.85.15).
[12:08:05] + News From Folding@Home: Welcome to Folding@Home
[12:08:05] Loaded queue successfully.
[12:08:06] + Closed connections
[12:08:06] 
[12:08:06] + Processing work unit
[12:08:06] Core required: FahCore_a4.exe
[12:08:06] Core found.
[12:08:06] Working on queue slot 09 [June 9 12:08:06 UTC]
[12:08:06] + Working ...
[12:08:06] 
[12:08:06] *------------------------------*
[12:08:06] Folding@Home Gromacs GB Core
[12:08:06] Version 2.27 (Dec. 15, 2010)
[12:08:06] 
[12:08:06] Preparing to commence simulation
[12:08:06] - Looking at optimizations...
[12:08:06] - Created dyn
[12:08:06] - Files status OK
[12:08:06] - Expanded 54659 -> 202980 (decompressed 371.3 percent)
[12:08:06] Called DecompressByteArray: compressed_data_size=54659 data_size=202980, decompressed_data_size=202980 diff=0
[12:08:06] - Digital signature verified
[12:08:06] 
[12:08:06] Project: 10078 (Run 163, Clone 0, Gen 19)
[12:08:06] 
[12:08:06] Assembly optimizations on if available.
[12:08:06] Entering M.D.
[12:08:12] Mapping NT from 1 to 1 
[12:08:13] Completed 0 out of 10000000 steps  (0%)
[12:30:06] Completed 100000 out of 10000000 steps  (1%)
[12:52:19] Completed 200000 out of 10000000 steps  (2%)
[13:13:39] Completed 300000 out of 10000000 steps  (3%)
[13:35:27] Completed 400000 out of 10000000 steps  (4%)
[13:56:56] Completed 500000 out of 10000000 steps  (5%)
[14:19:58] Completed 600000 out of 10000000 steps  (6%)
[14:54:16] Completed 700000 out of 10000000 steps  (7%)
[15:18:39] Completed 800000 out of 10000000 steps  (8%)

Folding@Home Client Shutdown.

Posted: **Thu Jun 09, 2011 11:20 pm**

Decembermouse wrote:P5-133XL's suggestions are along the lines of what I was going to say. You may have some background task gumming up the works, but to not finish something with a one-month deadline... maybe the computer is going to sleep? Otherwise, you really don't have it turned on that much of the time after all. Your log and what it indicates as far as TPF will be useful as others have said.

I'm sure you know how to check how many background tasks you have going, and it's worth looking into whether one (or many) of those is/are eating up a lot of clock cycles.

Unfortunately, the units only have a 10 day deadline at most, see the logs I just posted....

Posted: **Thu Jun 09, 2011 11:28 pm**

See edit above.

Your TPF isn't awful, 18-20 minutes or so... it looks like you turn the computer on shortly after 9am, and turn the machine off a little after 3pm.

June 2, 6, 7, 8, and 9 were dates that the client ran. So you're only Folding on weekdays, too, 5 days out of 7. That work unit must have been received before June 2, because it didn't start at 0% in the portion of the log from June 2, so maybe you got it a day or three earlier than that, in which case yeah, you're not getting enough work done per day to make deadlines by June 2, since it's only on for several hours per day.

Posted: **Thu Jun 09, 2011 11:34 pm**

You either have to leave your laptop on longer, or experiment with what flags would yield protomol or gromacs projects instead of a4.

You could try small packet size, but that might not work, I wouldn't use advmethods as I think that will work the opposite and give you more a4 unit's. And, it wouldn't be a fixed solution as the wu mix will change in the future.

I didn't even realize how short the classic deadline's were now, last time I ran a classic client 30 days was the norm, but now it's 8 days which is pretty short. I know this was announced/said to happen at some time, I just didn't pay enough attention when it did.

Posted: **Thu Jun 09, 2011 11:36 pm**

Decembermouse wrote:P5-133XL's suggestions are along the lines of what I was going to say. You may have some background task gumming up the works, but to not finish something with a one-month deadline... maybe the computer is going to sleep? Otherwise, you really don't have it turned on that much of the time after all. Your log and what it indicates as far as TPF will be useful as others have said.

I'm sure you know how to check how many background tasks you have going, and it's worth looking into whether one (or many) of those is/are eating up a lot of clock cycles.

(edit) yeah, it looks like the client is frequently starting up, then shutting down not to long after. That is likely part of the issue. Looking at the time stamps in your log, it appears you are only running Folding for a few hours per day, so it's reasonable to expect the machine to not always meet deadlines.

I didn't mind p5-133XL's post parroting mine above it, but you're pushing it

Why you feel the need to duplicate what is already posted?

Folding Forum

Keep missing deadline

Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline

Re: Keep missing deadline