Page 1 of 1
Project: 6900 (Run 19, Clone 5, Gen 0)
Posted: Mon Jun 06, 2011 2:05 pm
by fernandol
Hi.
I would like to know what's this error.
After finish the whole WU I received 0 pts
Code: Select all
10:00:35] - Autosend completed
[10:15:24] Completed 245000 out of 250000 steps (98%)
[10:41:19] Completed 247500 out of 250000 steps (99%)
[11:07:16] Completed 250000 out of 250000 steps (100%)
[11:07:26] DynamicWrapper: Finished Work Unit: sleep=10000
[11:07:36]
[11:07:36] Finished Work Unit:
[11:07:36] - Reading up to 52713120 from "work/wudata_02.trr": Read 52713120
[11:07:36] trr file hash check passed.
[11:07:36] - Reading up to 47027000 from "work/wudata_02.xtc": Read 47027000
[11:07:36] xtc file hash check passed.
[11:07:36] edr file hash check passed.
[11:07:36] logfile size: 194373
[11:07:36] Leaving Run
[11:07:36] - Writing 100102433 bytes of core data to disk...
[11:07:37] ... Done.
[11:07:55] - Shutting down core
[11:07:55]
[11:07:55] Folding@home Core Shutdown: FINISHED_UNIT
[11:07:58] CoreStatus = 64 (100)
[11:07:58] Unit 2 finished with 69 percent of time to deadline remaining.
[11:07:58] Updated performance fraction: 0.695894
[11:07:58] Sending work to server
[11:07:58] Project: 6900 (Run 19, Clone 5, Gen 0)
[11:07:58] + Attempting to send results [June 6 11:07:58 UTC]
[11:07:58] - Reading file work/wuresults_02.dat from core
[11:07:58] (Read 100102433 bytes from disk)
[11:07:58] Connecting to http://130.237.232.141:8080/
[11:56:49] Posted data.
[11:56:49] Initial: 0000; - Uploaded at ~33 kB/s
[11:56:49] - Averaged speed for that direction ~33 kB/s
[11:56:49] - Server reports problem with unit. <====
[11:56:49] Trying to send all finished work units
[11:56:49] + No unsent completed units remaining.
[11:56:49] - Preparing to get new work unit...
[11:56:49] Cleaning up work directory
[11:56:49] + Attempting to get work packet
[11:56:49] Passkey found
[11:56:49] - Will indicate memory of 4078 MB
[11:56:49] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 7
[11:56:49] - Connecting to assignment server
[11:56:49] Connecting to http://assign.stanford.edu:8080/
[11:56:51] Posted data.
[11:56:51] Initial: ED82; - Successful: assigned to (130.237.232.141).
[11:56:51] + News From Folding@Home: Welcome to Folding@Home
[11:56:51] Loaded queue successfully.
[11:56:51] Sent data
[11:56:51] Connecting to http://130.237.232.141:8080/
[11:56:57] Posted data.
[11:56:57] Initial: 0000; - Receiving payload (expected size: 20063674)
[11:58:33] - Downloaded at ~204 kB/s
[11:58:33] - Averaged speed for that direction ~209 kB/s
[11:58:33] + Received work.
[11:58:33] Trying to send all finished work units
[11:58:33] + No unsent completed units remaining.
[11:58:33] + Closed connections
[11:58:33]
[11:58:33] + Processing work unit
[11:58:33] Core required: FahCore_a5.exe
[11:58:33] Core found.
[11:58:33] Working on queue slot 03 [June 6 11:58:33 UTC]
[11:58:33] + Working ...
[11:58:33] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 03 -np 8 -checkpoint 30 -verbose -lifeline 3096 -version 634'
[11:58:33]
[11:58:33] *------------------------------*
[11:58:33] Folding@Home Gromacs SMP Core
[11:58:33] Version 2.27 (Mar 12, 2010)
[11:58:33]
[11:58:33] Preparing to commence simulation
[11:58:33] - Looking at optimizations...
[11:58:33] - Created dyn
[11:58:33] - Files status OK
[11:58:37] - Expanded 20063162 -> 30796292 (decompressed 153.4 percent)
[11:58:37] Called DecompressByteArray: compressed_data_size=20063162 data_size=30796292, decompressed_data_size=30796292 diff=0
[11:58:37] - Digital signature verified
[11:58:37]
[11:58:37] Project: 6900 (Run 52, Clone 18, Gen 0)
[11:58:37]
[11:58:37] Assembly optimizations on if available.
[11:58:37] Entering M.D.
[11:58:43] Mapping NT from 8 to 8
[11:58:45] Completed 0 out of 250000 steps (0%)
[12:24:37] Completed 2500 out of 250000 steps (1%)
[12:50:29] Completed 5000 out of 250000 steps (2%)
[13:16:21] Completed 7500 out of 250000 steps (3%)
Thanks,
Fernando
Re: Project: 6900 (Run 19, Clone 5, Gen 0)
Posted: Tue Jun 07, 2011 4:30 am
by PantherX
Weird, there is a record of the WU from another donor:
Your WU (P6900 R19 C5 G0) was added to the stats database on 2010-11-23 10:08:35 for 59685.1 points of credit.
Can you please post the FAHlog when you received the WU?
Re: Project: 6900 (Run 19, Clone 5, Gen 0)
Posted: Tue Jun 07, 2011 10:45 am
by fernandol
Hi Panther.
Code: Select all
--- Opening Log file [June 4 16:00:33 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.34
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\fh
Executable: C:\fh\FAH6.34-win32-SMP.exe
Arguments: -verbosity 9 -bigadv -smp
[16:00:33] - Ask before connecting: No
[16:00:33] - User name: Fernandol (Team 148894)
[16:00:33] - User ID not found locally
[16:00:33] + Requesting User ID from server
[16:00:33] - Getting ID from AS:
[16:00:33] Connecting to http://assign.stanford.edu:8080/
[16:00:35] Posted data.
[16:00:35] Initial: 291F; - Received User ID = 1F29236A77AFD59B
[16:00:35] - Machine ID: 3
[16:00:35]
[16:00:35] Loaded queue successfully.
[16:00:35]
[16:00:35] - Autosending finished units... [June 4 16:00:35 UTC]
[16:00:35] + Processing work unit
[16:00:35] Trying to send all finished work units
[16:00:35] Core required: FahCore_a5.exe
[16:00:35] + No unsent completed units remaining.
[16:00:35] Core found.
[16:00:35] - Autosend completed
[16:00:35] Working on queue slot 02 [June 4 16:00:35 UTC]
[16:00:35] + Working ...
[16:00:35] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 02 -np 8 -checkpoint 30 -verbose -lifeline 3096 -version 634'
[16:00:35]
[16:00:35] *------------------------------*
[16:00:35] Folding@Home Gromacs SMP Core
[16:00:35] Version 2.27 (Mar 12, 2010)
[16:00:35]
[16:00:35] Preparing to commence simulation
[16:00:35] - Ensuring status. Please wait.
[16:00:45] - Looking at optimizations...
[16:00:45] - Working with standard loops on this execution.
[16:00:45] - Previous termination of core was improper.
[16:00:45] - Files status OK
[16:00:48] - Expanded 20062598 -> 30796292 (decompressed 153.5 percent)
[16:00:48] Called DecompressByteArray: compressed_data_size=20062598 data_size=30796292, decompressed_data_size=30796292 diff=0
[16:00:48] - Digital signature verified
[16:00:48]
[16:00:48] Project: 6900 (Run 19, Clone 5, Gen 0)
[16:00:48]
[16:00:48] Entering M.D.
[16:00:55] Mapping NT from 8 to 8
[16:00:57] Completed 0 out of 250000 steps (0%)
[16:26:52] Completed 2500 out of 250000 steps (1%)
[16:52:42] Completed 5000 out of 250000 steps (2%)
[17:18:31] Completed 7500 out of 250000 steps (3%)
[17:44:22] Completed 10000 out of 250000 steps (4%)
[18:10:13] Completed 12500 out of 250000 steps (5%)
[18:36:04] Completed 15000 out of 250000 steps (6%)
[19:01:57] Completed 17500 out of 250000 steps (7%)
[19:27:47] Completed 20000 out of 250000 steps (8%)
[19:53:40] Completed 22500 out of 250000 steps (9%)
[20:19:32] Completed 25000 out of 250000 steps (10%)
[20:45:23] Completed 27500 out of 250000 steps (11%)
[21:11:15] Completed 30000 out of 250000 steps (12%)
[21:37:05] Completed 32500 out of 250000 steps (13%)
[22:00:35] - Autosending finished units... [June 4 22:00:35 UTC]
[22:00:35] Trying to send all finished work units
[22:00:35] + No unsent completed units remaining.
[22:00:35] - Autosend completed
[22:02:55] Completed 35000 out of 250000 steps (14%)
[22:28:46] Completed 37500 out of 250000 steps (15%)
[22:54:37] Completed 40000 out of 250000 steps (16%)
[23:20:29] Completed 42500 out of 250000 steps (17%)
[23:46:20] Completed 45000 out of 250000 steps (18%)
[00:12:14] Completed 47500 out of 250000 steps (19%)
[00:38:08] Completed 50000 out of 250000 steps (20%)
[01:04:00] Completed 52500 out of 250000 steps (21%)
[01:29:49] Completed 55000 out of 250000 steps (22%)
[01:55:39] Completed 57500 out of 250000 steps (23%)
[02:21:30] Completed 60000 out of 250000 steps (24%)
[02:47:20] Completed 62500 out of 250000 steps (25%)
[03:13:12] Completed 65000 out of 250000 steps (26%)
[03:39:04] Completed 67500 out of 250000 steps (27%)
[04:00:35] - Autosending finished units... [June 5 04:00:35 UTC]
[04:00:35] Trying to send all finished work units
[04:00:35] + No unsent completed units remaining.
[04:00:35] - Autosend completed
[04:04:59] Completed 70000 out of 250000 steps (28%)
[04:30:48] Completed 72500 out of 250000 steps (29%)
[04:56:40] Completed 75000 out of 250000 steps (30%)
[05:22:31] Completed 77500 out of 250000 steps (31%)
[05:48:23] Completed 80000 out of 250000 steps (32%)
[06:14:14] Completed 82500 out of 250000 steps (33%)
[06:40:06] Completed 85000 out of 250000 steps (34%)
[07:05:57] Completed 87500 out of 250000 steps (35%)
[07:31:47] Completed 90000 out of 250000 steps (36%)
[07:57:50] Completed 92500 out of 250000 steps (37%)
[08:23:42] Completed 95000 out of 250000 steps (38%)
[08:49:33] Completed 97500 out of 250000 steps (39%)
[09:15:23] Completed 100000 out of 250000 steps (40%)
[09:41:14] Completed 102500 out of 250000 steps (41%)
[10:00:35] - Autosending finished units... [June 5 10:00:35 UTC]
[10:00:35] Trying to send all finished work units
[10:00:35] + No unsent completed units remaining.
[10:00:35] - Autosend completed
[10:07:04] Completed 105000 out of 250000 steps (42%)
[10:32:55] Completed 107500 out of 250000 steps (43%)
[10:58:42] Completed 110000 out of 250000 steps (44%)
[11:24:32] Completed 112500 out of 250000 steps (45%)
[11:50:21] Completed 115000 out of 250000 steps (46%)
[12:16:10] Completed 117500 out of 250000 steps (47%)
[12:41:58] Completed 120000 out of 250000 steps (48%)
[13:07:46] Completed 122500 out of 250000 steps (49%)
[13:33:34] Completed 125000 out of 250000 steps (50%)
[13:59:21] Completed 127500 out of 250000 steps (51%)
[14:25:09] Completed 130000 out of 250000 steps (52%)
[14:50:58] Completed 132500 out of 250000 steps (53%)
[15:16:47] Completed 135000 out of 250000 steps (54%)
[15:42:37] Completed 137500 out of 250000 steps (55%)
[16:00:35] - Autosending finished units... [June 5 16:00:35 UTC]
[16:00:35] Trying to send all finished work units
[16:00:35] + No unsent completed units remaining.
[16:00:35] - Autosend completed
[16:08:26] Completed 140000 out of 250000 steps (56%)
[16:34:14] Completed 142500 out of 250000 steps (57%)
[17:00:03] Completed 145000 out of 250000 steps (58%)
[17:25:54] Completed 147500 out of 250000 steps (59%)
[17:51:45] Completed 150000 out of 250000 steps (60%)
[18:17:35] Completed 152500 out of 250000 steps (61%)
[18:43:27] Completed 155000 out of 250000 steps (62%)
[19:09:17] Completed 157500 out of 250000 steps (63%)
[19:35:08] Completed 160000 out of 250000 steps (64%)
[20:00:58] Completed 162500 out of 250000 steps (65%)
[20:26:51] Completed 165000 out of 250000 steps (66%)
[20:52:44] Completed 167500 out of 250000 steps (67%)
[21:18:37] Completed 170000 out of 250000 steps (68%)
[21:44:30] Completed 172500 out of 250000 steps (69%)
[22:00:35] - Autosending finished units... [June 5 22:00:35 UTC]
[22:00:35] Trying to send all finished work units
[22:00:35] + No unsent completed units remaining.
[22:00:35] - Autosend completed
[22:10:23] Completed 175000 out of 250000 steps (70%)
[22:36:16] Completed 177500 out of 250000 steps (71%)
[23:02:09] Completed 180000 out of 250000 steps (72%)
[23:27:58] Completed 182500 out of 250000 steps (73%)
[23:53:50] Completed 185000 out of 250000 steps (74%)
[00:19:43] Completed 187500 out of 250000 steps (75%)
[00:45:36] Completed 190000 out of 250000 steps (76%)
[01:11:29] Completed 192500 out of 250000 steps (77%)
[01:37:21] Completed 195000 out of 250000 steps (78%)
[02:03:15] Completed 197500 out of 250000 steps (79%)
[02:29:06] Completed 200000 out of 250000 steps (80%)
[02:54:59] Completed 202500 out of 250000 steps (81%)
[03:20:52] Completed 205000 out of 250000 steps (82%)
[03:46:46] Completed 207500 out of 250000 steps (83%)
[04:00:35] - Autosending finished units... [June 6 04:00:35 UTC]
[04:00:35] Trying to send all finished work units
[04:00:35] + No unsent completed units remaining.
[04:00:35] - Autosend completed
[04:12:39] Completed 210000 out of 250000 steps (84%)
[04:38:32] Completed 212500 out of 250000 steps (85%)
[05:04:25] Completed 215000 out of 250000 steps (86%)
[05:30:15] Completed 217500 out of 250000 steps (87%)
[05:56:09] Completed 220000 out of 250000 steps (88%)
[06:22:04] Completed 222500 out of 250000 steps (89%)
[06:48:00] Completed 225000 out of 250000 steps (90%)
[07:13:54] Completed 227500 out of 250000 steps (91%)
[07:39:48] Completed 230000 out of 250000 steps (92%)
[08:05:51] Completed 232500 out of 250000 steps (93%)
[08:31:45] Completed 235000 out of 250000 steps (94%)
[08:57:37] Completed 237500 out of 250000 steps (95%)
[09:23:33] Completed 240000 out of 250000 steps (96%)
[09:49:28] Completed 242500 out of 250000 steps (97%)
[10:00:35] - Autosending finished units... [June 6 10:00:35 UTC]
[10:00:35] Trying to send all finished work units
[10:00:35] + No unsent completed units remaining.
[10:00:35] - Autosend completed
[10:15:24] Completed 245000 out of 250000 steps (98%)
[10:41:19] Completed 247500 out of 250000 steps (99%)
[11:07:16] Completed 250000 out of 250000 steps (100%)
[11:07:26] DynamicWrapper: Finished Work Unit: sleep=10000
[11:07:36]
[11:07:36] Finished Work Unit:
[11:07:36] - Reading up to 52713120 from "work/wudata_02.trr": Read 52713120
[11:07:36] trr file hash check passed.
[11:07:36] - Reading up to 47027000 from "work/wudata_02.xtc": Read 47027000
[11:07:36] xtc file hash check passed.
[11:07:36] edr file hash check passed.
[11:07:36] logfile size: 194373
[11:07:36] Leaving Run
[11:07:36] - Writing 100102433 bytes of core data to disk...
[11:07:37] ... Done.
[11:07:55] - Shutting down core
[11:07:55]
[11:07:55] Folding@home Core Shutdown: FINISHED_UNIT
[11:07:58] CoreStatus = 64 (100)
[11:07:58] Unit 2 finished with 69 percent of time to deadline remaining.
[11:07:58] Updated performance fraction: 0.695894
[11:07:58] Sending work to server
[11:07:58] Project: 6900 (Run 19, Clone 5, Gen 0)
[11:07:58] + Attempting to send results [June 6 11:07:58 UTC]
[11:07:58] - Reading file work/wuresults_02.dat from core
[11:07:58] (Read 100102433 bytes from disk)
[11:07:58] Connecting to http://130.237.232.141:8080/
[11:56:49] Posted data.
[11:56:49] Initial: 0000; - Uploaded at ~33 kB/s
[11:56:49] - Averaged speed for that direction ~33 kB/s
[11:56:49] - Server reports problem with unit.
[11:56:49] Trying to send all finished work units
[11:56:49] + No unsent completed units remaining.
[11:56:49] - Preparing to get new work unit...
[11:56:49] Cleaning up work directory
[11:56:49] + Attempting to get work packet
[11:56:49] Passkey found
[11:56:49] - Will indicate memory of 4078 MB
[11:56:49] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 7
[11:56:49] - Connecting to assignment server
[11:56:49] Connecting to http://assign.stanford.edu:8080/
[11:56:51] Posted data.
[11:56:51] Initial: ED82; - Successful: assigned to (130.237.232.141).
[11:56:51] + News From Folding@Home: Welcome to Folding@Home
[11:56:51] Loaded queue successfully.
[11:56:51] Sent data
[11:56:51] Connecting to http://130.237.232.141:8080/
[11:56:57] Posted data.
[11:56:57] Initial: 0000; - Receiving payload (expected size: 20063674)
[11:58:33] - Downloaded at ~204 kB/s
[11:58:33] - Averaged speed for that direction ~209 kB/s
[11:58:33] + Received work.
[11:58:33] Trying to send all finished work units
[11:58:33] + No unsent completed units remaining.
[11:58:33] + Closed connections
[11:58:33]
[11:58:33] + Processing work unit
[11:58:33] Core required: FahCore_a5.exe
[11:58:33] Core found.
[11:58:33] Working on queue slot 03 [June 6 11:58:33 UTC]
[11:58:33] + Working ...
[11:58:33] - Calling '.\FahCore_a5.exe -dir work/ -nice 19 -suffix 03 -np 8 -checkpoint 30 -verbose -lifeline 3096 -version 634'
[11:58:33]
[11:58:33] *------------------------------*
[11:58:33] Folding@Home Gromacs SMP Core
[11:58:33] Version 2.27 (Mar 12, 2010)
[11:58:33]
[11:58:33] Preparing to commence simulation
[11:58:33] - Looking at optimizations...
[11:58:33] - Created dyn
[11:58:33] - Files status OK
[11:58:37] - Expanded 20063162 -> 30796292 (decompressed 153.4 percent)
[11:58:37] Called DecompressByteArray: compressed_data_size=20063162 data_size=30796292, decompressed_data_size=30796292 diff=0
[11:58:37] - Digital signature verified
[11:58:37]
[11:58:37] Project: 6900 (Run 52, Clone 18, Gen 0)
[11:58:37]
[11:58:37] Assembly optimizations on if available.
[11:58:37] Entering M.D.
[11:58:43] Mapping NT from 8 to 8
[11:58:45] Completed 0 out of 250000 steps (0%)
[12:24:37] Completed 2500 out of 250000 steps (1%)
[12:50:29] Completed 5000 out of 250000 steps (2%)
[13:16:21] Completed 7500 out of 250000 steps (3%)
[13:42:12] Completed 10000 out of 250000 steps (4%)
[14:08:05] Completed 12500 out of 250000 steps (5%)
[14:33:56] Completed 15000 out of 250000 steps (6%)
[14:59:50] Completed 17500 out of 250000 steps (7%)
[15:25:41] Completed 20000 out of 250000 steps (8%)
[15:51:35] Completed 22500 out of 250000 steps (9%)
[16:00:35] - Autosending finished units... [June 6 16:00:35 UTC]
[16:00:35] Trying to send all finished work units
[16:00:35] + No unsent completed units remaining.
[16:00:35] - Autosend completed
[16:17:29] Completed 25000 out of 250000 steps (10%)
[16:43:23] Completed 27500 out of 250000 steps (11%)
[17:09:21] Completed 30000 out of 250000 steps (12%)
[17:35:15] Completed 32500 out of 250000 steps (13%)
[18:01:10] Completed 35000 out of 250000 steps (14%)
[18:27:05] Completed 37500 out of 250000 steps (15%)
[18:53:00] Completed 40000 out of 250000 steps (16%)
[19:18:55] Completed 42500 out of 250000 steps (17%)
[19:44:50] Completed 45000 out of 250000 steps (18%)
[20:10:45] Completed 47500 out of 250000 steps (19%)
[20:36:41] Completed 50000 out of 250000 steps (20%)
[21:02:35] Completed 52500 out of 250000 steps (21%)
[21:28:29] Completed 55000 out of 250000 steps (22%)
[21:54:24] Completed 57500 out of 250000 steps (23%)
[22:00:35] - Autosending finished units... [June 6 22:00:35 UTC]
[22:00:35] Trying to send all finished work units
[22:00:35] + No unsent completed units remaining.
[22:00:35] - Autosend completed
[22:20:21] Completed 60000 out of 250000 steps (24%)
[22:46:19] Completed 62500 out of 250000 steps (25%)
[23:12:13] Completed 65000 out of 250000 steps (26%)
[23:38:07] Completed 67500 out of 250000 steps (27%)
[00:04:00] Completed 70000 out of 250000 steps (28%)
[00:29:54] Completed 72500 out of 250000 steps (29%)
[00:55:45] Completed 75000 out of 250000 steps (30%)
[01:21:38] Completed 77500 out of 250000 steps (31%)
[01:47:31] Completed 80000 out of 250000 steps (32%)
[02:13:26] Completed 82500 out of 250000 steps (33%)
[02:39:21] Completed 85000 out of 250000 steps (34%)
[03:05:16] Completed 87500 out of 250000 steps (35%)
[03:31:11] Completed 90000 out of 250000 steps (36%)
[03:57:04] Completed 92500 out of 250000 steps (37%)
[04:00:35] - Autosending finished units... [June 7 04:00:35 UTC]
[04:00:35] Trying to send all finished work units
[04:00:35] + No unsent completed units remaining.
[04:00:35] - Autosend completed
[04:22:58] Completed 95000 out of 250000 steps (38%)
[04:48:50] Completed 97500 out of 250000 steps (39%)
[05:14:44] Completed 100000 out of 250000 steps (40%)
[05:40:37] Completed 102500 out of 250000 steps (41%)
[06:06:29] Completed 105000 out of 250000 steps (42%)
[06:32:21] Completed 107500 out of 250000 steps (43%)
[06:58:11] Completed 110000 out of 250000 steps (44%)
[07:24:04] Completed 112500 out of 250000 steps (45%)
[07:49:57] Completed 115000 out of 250000 steps (46%)
[08:15:57] Completed 117500 out of 250000 steps (47%)
[08:41:49] Completed 120000 out of 250000 steps (48%)
[09:07:40] Completed 122500 out of 250000 steps (49%)
[09:33:31] Completed 125000 out of 250000 steps (50%)
[09:59:22] Completed 127500 out of 250000 steps (51%)
[10:00:35] - Autosending finished units... [June 7 10:00:35 UTC]
[10:00:35] Trying to send all finished work units
[10:00:35] + No unsent completed units remaining.
[10:00:35] - Autosend completed
[10:25:13] Completed 130000 out of 250000 steps (52%)
Re: Project: 6900 (Run 19, Clone 5, Gen 0)
Posted: Tue Jun 07, 2011 10:42 pm
by PantherX
From the FAHlog that you posted this is what happened:
1) The Client already download the WU Project: 6900 (Run 19, Clone 5, Gen 0) and was processing it. However, it never reached the checkpoint and was terminated:
Code: Select all
[16:00:35] Loaded queue successfully.
2) Upon the Client restart, the User ID wasn't found so it downloaded a new User ID:
Code: Select all
[16:00:35] Initial: 291F; - Received User ID = 1F29236A77AFD59B
3) It restarts working on the WU Project: 6900 (Run 19, Clone 5, Gen 0):
Code: Select all
[16:00:35] Preparing to commence simulation
[16:00:35] - Ensuring status. Please wait.
[16:00:45] - Looking at optimizations...
[16:00:45] - Working with standard loops on this execution.
[16:00:45] - Previous termination of core was improper.
[16:00:45] - Files status OK
4) Once it upload the wuresult, the Server checks the User ID and finds that it is different from when it was being assigned hence rejects it (This is due to security reasons and to maintain data integrity):
Code: Select all
[11:56:49] Posted data.
[11:56:49] Initial: 0000; - Uploaded at ~33 kB/s
[11:56:49] - Averaged speed for that direction ~33 kB/s
[11:56:49] - Server reports problem with unit.
Do you know why the User ID was changed?
Re: Project: 6900 (Run 19, Clone 5, Gen 0)
Posted: Tue Jun 07, 2011 11:13 pm
by fernandol
Maybe because this was the first WU on this PC, I copied the client.cfg another PC and started the F@H
Re: Project: 6900 (Run 19, Clone 5, Gen 0)
Posted: Wed Jun 08, 2011 1:02 am
by PantherX
A new system will require a new User ID. However, copying only the client.cfg doesn't cause the loss of points. Did you by chance copy the entire file including the queue.dat file and then ran the F@H Client?
Re: Project: 6900 (Run 19, Clone 5, Gen 0)
Posted: Wed Jun 08, 2011 1:43 am
by fernandol
I just copied client.cfg and FAH6.34-win32-SMP.exe, and started the client.
I already did this before in another PC and had no problem.