171.64.65.64 overloaded
Posted: Fri May 20, 2011 6:26 pm
No Fermi units coming down or going up to 171.64.65.64. Status page shows Net Load of 719. Spike or problem?
Community driven support forum for Folding@home
https://foldingforum.org/
Code: Select all
20:23:51] + Attempting to get work packet
[20:23:51] Passkey found
[20:23:51] - Will indicate memory of 4076 MB
[20:23:51] Gpu type=3 species=21.
[20:23:51] - Connecting to assignment server
[20:23:51] Connecting to http://assign-GPU.stanford.edu:8080/
[20:23:51] Posted data.
[20:23:51] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[20:23:51] + News From Folding@Home: Welcome to Folding@Home
[20:23:51] Loaded queue successfully.
[20:23:51] Gpu type=3 species=21.
[20:23:51] Sent data
[20:23:51] Connecting to http://171.64.65.64:8080/
[20:24:12] - Couldn't send HTTP request to server
[20:24:12] + Could not connect to Work Server
[20:24:12] - Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
[20:25:46] + Attempting to get work packet
[20:25:46] Passkey found
[20:25:46] - Will indicate memory of 4076 MB
[20:25:46] Gpu type=3 species=21.
[20:25:46] - Connecting to assignment server
[20:25:46] Connecting to http://assign-GPU.stanford.edu:8080/
[20:25:46] Posted data.
[20:25:46] Initial: 43AB; - Successful: assigned to (171.67.108.32).
[20:25:46] + News From Folding@Home: Welcome to Folding@Home
[20:25:46] Loaded queue successfully.
Code: Select all
[08:28:03] + Attempting to send results [May 20 08:28:03 UTC]
[08:28:03] Gpu type=3 species=21.
[08:28:04] - Couldn't send HTTP request to server
[08:28:04] + Could not connect to Work Server (results)
[08:28:04] (171.64.65.64:8080)
[08:28:04] + Retrying using alternative port
[08:28:06] - Couldn't send HTTP request to server
[08:28:06] + Could not connect to Work Server (results)
[08:28:06] (171.64.65.64:80)
[08:28:06] - Error: Could not transmit unit 07 (completed May 20) to work server.
[08:28:06] Keeping unit 07 in queue.
[08:28:06] Project: 6801 (Run 9793, Clone 2, Gen 14)
[08:28:06] - Read packet limit of 540015616... Set to 524286976.
Code: Select all
###################################################
Folding@Home Client Version 6.41r2
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Documents and Settings\hondo\Application Data\Folding@home-gpu
[22:50:42] - Ask before connecting: No
[22:50:42] - User name: *hondo* (Team 51078)
[22:50:42] - User ID: 6EBE171B7E6C885A
[22:50:42] - Machine ID: 2
[22:50:42]
[22:50:42] Gpu type=3 species=21.
[22:50:43] Loaded queue successfully.
[22:50:43] Initialization complete
[22:50:43]
[22:50:43] + Processing work unit
[22:50:43] Project: 6805 (Run 6308, Clone 3, Gen 24)
[22:50:43] + Attempting to send results [May 20 22:50:43 UTC]
[22:50:43] Core required: FahCore_15.exe
[22:50:43] Core found.
[22:50:43] Gpu type=3 species=21.
[22:50:43] Working on queue slot 00 [May 20 22:50:43 UTC]
[22:50:43] + Working ...
[22:50:43]
[22:50:43] *------------------------------*
[22:50:43] Folding@Home GPU Core
[22:50:43] Version 2.15 (Tue Nov 16 09:05:18 PST 2010)
[22:50:43]
[22:50:43] Build host: SimbiosNvdWin7
[22:50:43] Board Type: NVIDIA/CUDA
[22:50:43] Core : x=15
[22:50:43] Window's signal control handler registered.
[22:50:43] Preparing to commence simulation
[22:50:43] - Ensuring status. Please wait.
[22:50:44] - Couldn't send HTTP request to server
[22:50:44] + Could not connect to Work Server (results)
[22:50:44] (171.64.65.64:8080)
[22:50:44] + Retrying using alternative port
[22:50:46] - Couldn't send HTTP request to server
[22:50:46] + Could not connect to Work Server (results)
[22:50:46] (171.64.65.64:80)
[22:50:46] - Error: Could not transmit unit 08 (completed May 20) to work server.
[22:50:46] + Attempting to send results [May 20 22:50:46 UTC]
[22:50:46] Gpu type=3 species=21.
[22:50:52] - Looking at optimizations...
[22:50:52] - Working with standard loops on this execution.
[22:50:52] - Previous termination of core was improper.
[22:50:52] - Going to use standard loops.
[22:50:52] - Files status OK
[22:50:52] sizeof(CORE_PACKET_HDR) = 512 file=<>
[22:50:52] - Expanded 20702 -> 77571 (decompressed 374.7 percent)
[22:50:52] Called DecompressByteArray: compressed_data_size=20702 data_size=77571, decompressed_data_size=77571 diff=0
[22:50:52] - Digital signature verified
[22:50:52]
[22:50:52] Project: 10975 (Run 2, Clone 68, Gen 17)
[22:50:52]
[22:50:52] Entering M.D.
[22:50:54] Will resume from checkpoint file work/wudata_00.ckp
[22:50:54] Tpr hash work/wudata_00.tpr: 3435825622 3030450624 4113112955 185304617 1472652184
[22:50:55] Working on 247 ProG_hpin
[22:50:55] Client config found, loading data.
[22:50:55] Starting GUI Server
[22:51:13] - Server does not have record of this unit. Will try again later.
[22:51:13] Could not transmit unit 08 to Collection server; keeping in queue.
[22:51:13] Resuming from checkpoint
[22:51:13] fcCheckPointResume: retreived and current tpr file hash:
[22:51:13] 0 3435825622 3435825622
[22:51:13] 1 3030450624 3030450624
[22:51:13] 2 4113112955 4113112955
[22:51:13] 3 185304617 185304617
[22:51:13] 4 1472652184 1472652184
[22:51:13] fcCheckPointResume: file hashes same.
[22:51:13] fcCheckPointResume: state restored.
[22:51:13] fcCheckPointResume: name work/wudata_00.log Verified work/wudata_00.log
[22:51:14] fcCheckPointResume: name work/wudata_00.trr Verified work/wudata_00.trr
[22:51:14] fcCheckPointResume: name work/wudata_00.xtc Verified work/wudata_00.xtc
[22:51:15] fcCheckPointResume: name work/wudata_00.edr Verified work/wudata_00.edr
[22:51:15] fcCheckPointResume: state restored 2
[22:51:15] Resumed from checkpoint
[22:51:15] Setting checkpoint frequency: 500000
[22:51:15] Completed 14000001 out of 50000000 steps (28%).
[22:52:06] Completed 14500000 out of 50000000 steps (29%).
[22:52:57] Completed 15000000 out of 50000000 steps (30%).
[22:53:48] Completed 15500000 out of 50000000 steps (31%).
[22:54:39] Completed 16000000 out of 50000000 steps (32%).
[22:55:30] Completed 16500000 out of 50000000 steps (33%).
[22:56:21] Completed 17000000 out of 50000000 steps (34%).
[22:57:12] Completed 17500000 out of 50000000 steps (35%).
[22:58:03] Completed 18000000 out of 50000000 steps (36%).
[22:58:53] Completed 18500000 out of 50000000 steps (37%).
[22:59:44] Completed 19000000 out of 50000000 steps (38%).
[23:00:35] Completed 19500000 out of 50000000 steps (39%).
--- Opening Log file [May 20 23:02:04 UTC]
# Windows GPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.41r2
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Documents and Settings\hondo\Application Data\Folding@home-gpu
[23:02:04] - Ask before connecting: No
[23:02:04] - User name: *hondo* (Team 51078)
[23:02:04] - User ID: 6EBE171B7E6C885A
[23:02:04] - Machine ID: 2
[23:02:04]
[23:02:04] Gpu type=3 species=21.
[23:02:04] Loaded queue successfully.
[23:02:04] Initialization complete
[23:02:04]
[23:02:04] + Processing work unit
[23:02:04] Project: 6805 (Run 6308, Clone 3, Gen 24)
[23:02:04] + Attempting to send results [May 20 23:02:04 UTC]
[23:02:04] Core required: FahCore_15.exe
[23:02:04] Core found.
[23:02:04] Gpu type=3 species=21.
[23:02:04] Working on queue slot 00 [May 20 23:02:04 UTC]
[23:02:04] + Working ...
[23:02:04]
[23:02:04] *------------------------------*
[23:02:04] Folding@Home GPU Core
[23:02:04] Version 2.15 (Tue Nov 16 09:05:18 PST 2010)
[23:02:04]
[23:02:04] Build host: SimbiosNvdWin7
[23:02:04] Board Type: NVIDIA/CUDA
[23:02:04] Core : x=15
[23:02:04] Window's signal control handler registered.
[23:02:04] Preparing to commence simulation
[23:02:04] - Ensuring status. Please wait.
[23:02:06] - Couldn't send HTTP request to server
[23:02:06] + Could not connect to Work Server (results)
[23:02:06] (171.64.65.64:8080)
[23:02:06] + Retrying using alternative port
[23:02:07] - Couldn't send HTTP request to server
[23:02:07] + Could not connect to Work Server (results)
[23:02:07] (171.64.65.64:80)
[23:02:07] - Error: Could not transmit unit 08 (completed May 20) to work server.
[23:02:07] + Attempting to send results [May 20 23:02:07 UTC]
[23:02:07] Gpu type=3 species=21.
[23:02:14] - Looking at optimizations...
[23:02:14] - Working with standard loops on this execution.
[23:02:14] - Previous termination of core was improper.
[23:02:14] - Going to use standard loops.
[23:02:14] - Files status OK
[23:02:14] sizeof(CORE_PACKET_HDR) = 512 file=<>
[23:02:14] - Expanded 20702 -> 77571 (decompressed 374.7 percent)
[23:02:14] Called DecompressByteArray: compressed_data_size=20702 data_size=77571, decompressed_data_size=77571 diff=0
[23:02:14] - Digital signature verified
[23:02:14]
[23:02:14] Project: 10975 (Run 2, Clone 68, Gen 17)
[23:02:14]
[23:02:14] Entering M.D.
[23:02:16] Will resume from checkpoint file work/wudata_00.ckp
[23:02:16] Tpr hash work/wudata_00.tpr: 3435825622 3030450624 4113112955 185304617 1472652184
[23:02:17] Working on 247 ProG_hpin
[23:02:17] Client config found, loading data.
[23:02:17] Starting GUI Server
[23:02:22] Resuming from checkpoint
[23:02:22] fcCheckPointResume: retreived and current tpr file hash:
[23:02:22] 0 3435825622 3435825622
[23:02:22] 1 3030450624 3030450624
[23:02:22] 2 4113112955 4113112955
[23:02:22] 3 185304617 185304617
[23:02:22] 4 1472652184 1472652184
[23:02:22] fcCheckPointResume: file hashes same.
[23:02:22] fcCheckPointResume: state restored.
[23:02:22] fcCheckPointResume: name work/wudata_00.log Verified work/wudata_00.log
[23:02:23] fcCheckPointResume: name work/wudata_00.trr Verified work/wudata_00.trr
[23:02:23] fcCheckPointResume: name work/wudata_00.xtc Verified work/wudata_00.xtc
[23:02:24] fcCheckPointResume: name work/wudata_00.edr Verified work/wudata_00.edr
[23:02:24] fcCheckPointResume: state restored 2
[23:02:24] Resumed from checkpoint
[23:02:24] Setting checkpoint frequency: 500000
[23:02:24] Completed 19500001 out of 50000000 steps (39%).
[23:02:34] - Server does not have record of this unit. Will try again later.
[23:02:34] Could not transmit unit 08 to Collection server; keeping in queue.
[23:03:17] Completed 20000000 out of 50000000 steps (40%).
[23:04:08] Completed 20500000 out of 50000000 steps (41%).
[23:04:59] Completed 21000000 out of 50000000 steps (42%).
[23:05:50] Completed 21500000 out of 50000000 steps (43%).
[23:06:41] Completed 22000000 out of 50000000 steps (44%).
[23:07:32] Completed 22500000 out of 50000000 steps (45%).
[23:08:24] Completed 23000000 out of 50000000 steps (46%).
[23:09:15] Completed 23500000 out of 50000000 steps (47%).
[23:10:06] Completed 24000000 out of 50000000 steps (48%).
[23:10:57] Completed 24500000 out of 50000000 steps (49%).
[23:11:48] Completed 25000000 out of 50000000 steps (50%).
[23:12:39] Completed 25500000 out of 50000000 steps (51%).
[23:13:30] Completed 26000000 out of 50000000 steps (52%).
[23:14:21] Completed 26500000 out of 50000000 steps (53%).
[23:15:12] Completed 27000000 out of 50000000 steps (54%).
[23:16:03] Completed 27500000 out of 50000000 steps (55%).
[23:16:54] Completed 28000000 out of 50000000 steps (56%).
[23:17:45] Completed 28500000 out of 50000000 steps (57%).
[23:18:36] Completed 29000000 out of 50000000 steps (58%).
[23:19:27] Completed 29500000 out of 50000000 steps (59%).
[23:20:18] Completed 30000000 out of 50000000 steps (60%).
[23:21:08] Completed 30500000 out of 50000000 steps (61%).
[23:21:59] Completed 31000000 out of 50000000 steps (62%).
[23:22:50] Completed 31500000 out of 50000000 steps (63%).
[23:23:41] Completed 32000000 out of 50000000 steps (64%).
[23:24:32] Completed 32499999 out of 50000000 steps (65%).
[23:25:23] Completed 32999999 out of 50000000 steps (66%).
[23:26:14] Completed 33499999 out of 50000000 steps (67%).
[23:27:05] Completed 33999999 out of 50000000 steps (68%).
[23:27:56] Completed 34499999 out of 50000000 steps (69%).
[23:28:48] Completed 34999999 out of 50000000 steps (70%).
[23:29:39] Completed 35499999 out of 50000000 steps (71%).
[23:30:30] Completed 35999999 out of 50000000 steps (72%).
[23:31:21] Completed 36499999 out of 50000000 steps (73%).
[23:32:12] Completed 36999999 out of 50000000 steps (74%).
[23:33:04] Completed 37499999 out of 50000000 steps (75%).
[23:33:55] Completed 37999999 out of 50000000 steps (76%).
[23:34:46] Completed 38499999 out of 50000000 steps (77%).
[23:35:37] Completed 38999999 out of 50000000 steps (78%).
[23:36:28] Completed 39499999 out of 50000000 steps (79%).
[23:37:19] Completed 39999999 out of 50000000 steps (80%).
[23:38:11] Completed 40499999 out of 50000000 steps (81%).
[23:39:02] Completed 40999999 out of 50000000 steps (82%).
[23:39:53] Completed 41499999 out of 50000000 steps (83%).
[23:40:44] Completed 41999999 out of 50000000 steps (84%).
[23:41:35] Completed 42499999 out of 50000000 steps (85%).
[23:42:27] Completed 42999999 out of 50000000 steps (86%).
[23:43:18] Completed 43499999 out of 50000000 steps (87%).
[23:44:09] Completed 43999999 out of 50000000 steps (88%).
--- Opening Log file [May 20 23:46:09 UTC]
# Windows GPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.41r2
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Documents and Settings\hondo\Application Data\Folding@home-gpu
[23:46:09] - Ask before connecting: No
[23:46:09] - User name: *hondo* (Team 51078)
[23:46:09] - User ID: 6EBE171B7E6C885A
[23:46:09] - Machine ID: 2
[23:46:09]
[23:46:09] Gpu type=3 species=21.
[23:46:09] Loaded queue successfully.
[23:46:09] Initialization complete
[23:46:09]
[23:46:09] + Processing work unit
[23:46:09] Project: 6805 (Run 6308, Clone 3, Gen 24)
[23:46:09] + Attempting to send results [May 20 23:46:09 UTC]
[23:46:09] Core required: FahCore_15.exe
[23:46:09] Core found.
[23:46:09] Gpu type=3 species=21.
[23:46:09] Working on queue slot 00 [May 20 23:46:09 UTC]
[23:46:09] + Working ...
[23:46:09]
[23:46:09] *------------------------------*
[23:46:09] Folding@Home GPU Core
[23:46:09] Version 2.15 (Tue Nov 16 09:05:18 PST 2010)
[23:46:09]
[23:46:09] Build host: SimbiosNvdWin7
[23:46:09] Board Type: NVIDIA/CUDA
[23:46:09] Core : x=15
[23:46:09] Window's signal control handler registered.
[23:46:09] Preparing to commence simulation
[23:46:09] - Ensuring status. Please wait.
[23:46:10] - Couldn't send HTTP request to server
[23:46:10] + Could not connect to Work Server (results)
[23:46:10] (171.64.65.64:8080)
[23:46:10] + Retrying using alternative port
[23:46:12] - Couldn't send HTTP request to server
[23:46:12] + Could not connect to Work Server (results)
[23:46:12] (171.64.65.64:80)
[23:46:12] - Error: Could not transmit unit 08 (completed May 20) to work server.
[23:46:12] + Attempting to send results [May 20 23:46:12 UTC]
[23:46:12] Gpu type=3 species=21.
[23:46:19] - Looking at optimizations...
[23:46:19] - Working with standard loops on this execution.
[23:46:19] - Previous termination of core was improper.
[23:46:19] - Going to use standard loops.
[23:46:19] - Files status OK
[23:46:19] sizeof(CORE_PACKET_HDR) = 512 file=<>
[23:46:19] - Expanded 20702 -> 77571 (decompressed 374.7 percent)
[23:46:19] Called DecompressByteArray: compressed_data_size=20702 data_size=77571, decompressed_data_size=77571 diff=0
[23:46:19] - Digital signature verified
[23:46:19]
[23:46:19] Project: 10975 (Run 2, Clone 68, Gen 17)
[23:46:19]
[23:46:19] Entering M.D.
[23:46:21] Will resume from checkpoint file work/wudata_00.ckp
[23:46:21] Tpr hash work/wudata_00.tpr: 3435825622 3030450624 4113112955 185304617 1472652184
[23:46:22] Working on 247 ProG_hpin
[23:46:22] Client config found, loading data.
[23:46:22] Starting GUI Server
[23:46:24] Resuming from checkpoint
[23:46:24] fcCheckPointResume: retreived and current tpr file hash:
[23:46:24] 0 3435825622 3435825622
[23:46:24] 1 3030450624 3030450624
[23:46:24] 2 4113112955 4113112955
[23:46:24] 3 185304617 185304617
[23:46:24] 4 1472652184 1472652184
[23:46:24] fcCheckPointResume: file hashes same.
[23:46:24] fcCheckPointResume: state restored.
[23:46:24] fcCheckPointResume: name work/wudata_00.log Verified work/wudata_00.log
[23:46:26] fcCheckPointResume: name work/wudata_00.trr Verified work/wudata_00.trr
[23:46:26] fcCheckPointResume: name work/wudata_00.xtc Verified work/wudata_00.xtc
[23:46:28] fcCheckPointResume: name work/wudata_00.edr Verified work/wudata_00.edr
[23:46:28] fcCheckPointResume: state restored 2
[23:46:28] Resumed from checkpoint
[23:46:28] Setting checkpoint frequency: 500000
[23:46:28] Completed 44000001 out of 50000000 steps (88%).
[23:47:19] Completed 44499999 out of 50000000 steps (89%).
[23:47:42] - Couldn't send HTTP request to server
[23:47:42] + Could not connect to Work Server (results)
[23:47:42] (171.67.108.26:8080)
[23:47:42] + Retrying using alternative port
[23:47:44] - Couldn't send HTTP request to server
[23:47:44] + Could not connect to Work Server (results)
[23:47:44] (171.67.108.26:80)
[23:47:44] Could not transmit unit 08 to Collection server; keeping in queue.
[23:48:10] Completed 44999999 out of 50000000 steps (90%).
[23:49:01] Completed 45499999 out of 50000000 steps (91%).
thanks7im wrote:I pinged YSL, a PG researcher, about her server.
Code: Select all
[16:07:09] Folding@home Core Shutdown: FINISHED_UNIT
[16:07:12] CoreStatus = 64 (100)
[16:07:12] Unit 1 finished with 99 percent of time to deadline remaining.
[16:07:12] Updated performance fraction: 0.991337
[16:07:12] Sending work to server
[16:07:12] Project: 6801 (Run 1154, Clone 4, Gen 14)
[16:07:12] - Read packet limit of 540015616... Set to 524286976.
[16:07:12] + Attempting to send results [May 21 16:07:12 UTC]
[16:07:12] - Reading file work/wuresults_01.dat from core
[16:07:12] (Read 2509092 bytes from disk)
[16:07:12] Gpu type=3 species=30.
[16:07:12] Connecting to http://171.64.65.64:8080/
[16:07:13] - Couldn't send HTTP request to server
[16:07:13] + Could not connect to Work Server (results)
[16:07:13] (171.64.65.64:8080)
[16:07:13] + Retrying using alternative port
[16:07:13] Connecting to http://171.64.65.64:80/
[16:07:14] - Couldn't send HTTP request to server
[16:07:14] + Could not connect to Work Server (results)
[16:07:14] (171.64.65.64:80)
[16:07:14] - Error: Could not transmit unit 01 (completed May 21) to work server.
[16:07:14] - 1 failed uploads of this unit.
[16:07:14] Keeping unit 01 in queue.
[16:07:14] Trying to send all finished work units
[16:07:14] Project: 6801 (Run 1154, Clone 4, Gen 14)
[16:07:14] - Read packet limit of 540015616... Set to 524286976.
[16:07:14] + Attempting to send results [May 21 16:07:14 UTC]
[16:07:14] - Reading file work/wuresults_01.dat from core
[16:07:14] (Read 2509092 bytes from disk)
[16:07:14] Gpu type=3 species=30.
[16:07:14] Connecting to http://171.64.65.64:8080/
[16:07:15] - Couldn't send HTTP request to server
[16:07:15] + Could not connect to Work Server (results)
[16:07:15] (171.64.65.64:8080)
[16:07:15] + Retrying using alternative port
[16:07:15] Connecting to http://171.64.65.64:80/
[16:07:17] - Couldn't send HTTP request to server
[16:07:17] + Could not connect to Work Server (results)
[16:07:17] (171.64.65.64:80)
[16:07:17] - Error: Could not transmit unit 01 (completed May 21) to work server.
[16:07:17] - 2 failed uploads of this unit.