Folding Forum

Community driven support forum for Folding@home
https://foldingforum.org/

Project: 6900 (Run 18, Clone 6, Gen 20)

https://foldingforum.org/viewtopic.php?t=17355

Page 1 of 1

Project: 6900 (Run 18, Clone 6, Gen 20)

Posted: Thu Jan 20, 2011 8:22 am
by Standinwave
Hi Folks, Downloaded Jan 16th 23:07 UTC (deadline 4 days later)

Code: Select all

[22:51:41] + Attempting to send results [January 16 22:51:41 UTC]
[22:51:41] - Reading file work/wuresults_04.dat from core
[22:51:41]   (Read 100148038 bytes from disk)
[22:51:41] Connecting to http://171.67.108.22:8080/
[23:05:12] Posted data.
[23:05:12] Initial: 0000; - Uploaded at ~119 kB/s
[23:05:17] - Averaged speed for that direction ~120 kB/s
[23:05:17] + Results successfully sent
[23:05:17] Thank you for your contribution to Folding@Home.
[23:05:17] + Number of Units Completed: 4

[23:05:24] Trying to send all finished work units
[23:05:24] + No unsent completed units remaining.
[23:05:24] - Preparing to get new work unit...
[23:05:24] Cleaning up work directory
[23:05:24] + Attempting to get work packet
[23:05:24] Passkey found
[23:05:24] - Will indicate memory of 12279 MB
[23:05:24] - Connecting to assignment server
[23:05:24] Connecting to http://assign.stanford.edu:8080/
[23:05:25] Posted data.
[23:05:25] Initial: ED82; - Successful: assigned to (130.237.232.141).
[23:05:25] + News From Folding@Home: Welcome to Folding@Home
[23:05:25] Loaded queue successfully.
[23:05:25] Sent data
[23:05:25] Connecting to http://130.237.232.141:8080/
[23:05:32] Posted data.
[23:05:32] Initial: 0000; - Receiving payload (expected size: 24865674)
[23:07:31] - Downloaded at ~204 kB/s
[23:07:31] - Averaged speed for that direction ~503 kB/s
[23:07:31] + Received work.
[23:07:31] Trying to send all finished work units
[23:07:31] + No unsent completed units remaining.
[23:07:31] + Closed connections
[23:07:31] 
[23:07:31] + Processing work unit
[23:07:31] Core required: FahCore_a3.exe
[23:07:31] Core found.
[23:07:31] Working on queue slot 05 [January 16 23:07:31 UTC]
[23:07:31] + Working ...
[23:07:31] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 3176 -version 630'

[23:07:31] 
[23:07:31] *------------------------------*
[23:07:31] Folding@Home Gromacs SMP Core
[23:07:31] Version 2.22 (Mar 12, 2010)
[23:07:31] 
[23:07:31] Preparing to commence simulation
[23:07:31] - Looking at optimizations...
[23:07:31] - Created dyn
[23:07:31] - Files status OK
[23:07:35] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[23:07:35] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[23:07:36] - Digital signature verified
[23:07:36] 
[23:07:36] Project: 6900 (Run 18, Clone 6, Gen 20)
[23:07:36] 
[23:07:36] Assembly optimizations on if available.
[23:07:36] Entering M.D.
[23:07:45] Completed 0 out of 250000 steps  (0%)
[23:33:45] Completed 2500 out of 250000 steps  (1%)
[23:59:42] Completed 5000 out of 250000 steps  (2%)
[00:25:48] Completed 7500 out of 250000 steps  (3%)
[00:51:46] Completed 10000 out of 250000 steps  (4%)
[01:17:47] Completed 12500 out of 250000 steps  (5%)
[01:43:41] Completed 15000 out of 250000 steps  (6%)
[02:08:33] - Autosending finished units... [January 17 02:08:33 UTC]
[02:08:33] Trying to send all finished work units
[02:08:33] + No unsent completed units remaining.
[02:08:33] - Autosend completed
[02:09:37] Completed 17500 out of 250000 steps  (7%)
[02:35:35] Completed 20000 out of 250000 steps  (8%)
[03:01:30] Completed 22500 out of 250000 steps  (9%)
[03:27:27] Completed 25000 out of 250000 steps  (10%)
[03:53:22] Completed 27500 out of 250000 steps  (11%)
[04:19:17] Completed 30000 out of 250000 steps  (12%)
[04:45:13] Completed 32500 out of 250000 steps  (13%)
[05:11:11] Completed 35000 out of 250000 steps  (14%)
[05:37:23] Completed 37500 out of 250000 steps  (15%)
[06:03:18] Completed 40000 out of 250000 steps  (16%)
[06:29:16] Completed 42500 out of 250000 steps  (17%)
[06:55:12] Completed 45000 out of 250000 steps  (18%)
[07:21:13] Completed 47500 out of 250000 steps  (19%)
[07:47:07] Completed 50000 out of 250000 steps  (20%)
[08:08:33] - Autosending finished units... [January 17 08:08:33 UTC]
[08:08:33] Trying to send all finished work units
[08:08:33] + No unsent completed units remaining.
[08:08:33] - Autosend completed
[08:13:05] Completed 52500 out of 250000 steps  (21%)
[08:39:01] Completed 55000 out of 250000 steps  (22%)
[09:05:00] Completed 57500 out of 250000 steps  (23%)
[09:30:55] Completed 60000 out of 250000 steps  (24%)
[09:56:53] Completed 62500 out of 250000 steps  (25%)
[10:23:07] Completed 65000 out of 250000 steps  (26%)


--- Opening Log file [January 17 10:56:54 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[10:56:54] - Ask before connecting: No
[10:56:54] - User name: Standin_wave (Team 35947)
[10:56:54] - User ID: 4DD2872A69F91966
[10:56:54] - Machine ID: 1
[10:56:54] 
[10:56:54] Loaded queue successfully.
[10:56:54] 
[10:56:54] - Autosending finished units... [January 17 10:56:54 UTC]
[10:56:54] + Processing work unit
[10:56:54] Trying to send all finished work units
[10:56:54] Core required: FahCore_a3.exe
[10:56:54] + No unsent completed units remaining.
[10:56:54] Core found.
[10:56:54] - Autosend completed
[10:56:54] Working on queue slot 05 [January 17 10:56:54 UTC]
[10:56:54] + Working ...
[10:56:54] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 2808 -version 630'

[10:56:54] 
[10:56:54] *------------------------------*
[10:56:54] Folding@Home Gromacs SMP Core
[10:56:54] Version 2.22 (Mar 12, 2010)
[10:56:54] 
[10:56:54] Preparing to commence simulation
[10:56:54] - Looking at optimizations...
[10:56:54] - Files status OK
[10:56:58] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[10:56:58] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[10:56:58] - Digital signature verified
[10:56:58] 
[10:56:58] Project: 6900 (Run 18, Clone 6, Gen 20)
[10:56:58] 
[10:56:59] Assembly optimizations on if available.
[10:56:59] Entering M.D.
[10:57:04] Using Gromacs checkpoints
[10:57:10] Resuming from checkpoint
[10:57:10] Verified work/wudata_05.log
[10:57:11] Verified work/wudata_05.trr
[10:57:11] Verified work/wudata_05.xtc
[10:57:11] Verified work/wudata_05.edr
[10:57:11] Completed 67280 out of 250000 steps  (26%)
[10:59:33] Completed 67500 out of 250000 steps  (27%)


--- Opening Log file [January 17 11:06:15 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[11:06:15] - Ask before connecting: No
[11:06:15] - User name: Standin_wave (Team 35947)
[11:06:15] - User ID: 4DD2872A69F91966
[11:06:15] - Machine ID: 1
[11:06:15] 
[11:06:15] Loaded queue successfully.
[11:06:15] 
[11:06:15] - Autosending finished units... [January 17 11:06:15 UTC]
[11:06:15] + Processing work unit
[11:06:15] Trying to send all finished work units
[11:06:15] Core required: FahCore_a3.exe
[11:06:15] + No unsent completed units remaining.
[11:06:15] Core found.
[11:06:15] - Autosend completed
[11:06:15] Working on queue slot 05 [January 17 11:06:15 UTC]
[11:06:15] + Working ...
[11:06:15] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 3084 -version 630'

[11:06:15] 
[11:06:15] *------------------------------*
[11:06:15] Folding@Home Gromacs SMP Core
[11:06:15] Version 2.22 (Mar 12, 2010)
[11:06:15] 
[11:06:15] Preparing to commence simulation
[11:06:15] - Looking at optimizations...
[11:06:15] - Files status OK
[11:06:19] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[11:06:19] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[11:06:19] - Digital signature verified
[11:06:19] 
[11:06:19] Project: 6900 (Run 18, Clone 6, Gen 20)
[11:06:19] 
[11:06:20] Assembly optimizations on if available.
[11:06:20] Entering M.D.
[11:06:26] Using Gromacs checkpoints
[11:06:31] Resuming from checkpoint
[11:06:32] Verified work/wudata_05.log
[11:06:32] Verified work/wudata_05.trr
[11:06:32] Verified work/wudata_05.xtc
[11:06:32] Verified work/wudata_05.edr
[11:06:33] Completed 67835 out of 250000 steps  (27%)
[11:26:42] Completed 70000 out of 250000 steps  (28%)
[11:49:11] Completed 72500 out of 250000 steps  (29%)
[12:11:45] Completed 75000 out of 250000 steps  (30%)
[12:34:06] Completed 77500 out of 250000 steps  (31%)
[12:56:27] Completed 80000 out of 250000 steps  (32%)
[13:18:50] Completed 82500 out of 250000 steps  (33%)
[13:41:09] Completed 85000 out of 250000 steps  (34%)
[14:03:28] Completed 87500 out of 250000 steps  (35%)


--- Opening Log file [January 17 15:45:29 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[15:45:29] - Ask before connecting: No
[15:45:29] - User name: Standin_wave (Team 35947)
[15:45:29] - User ID: 4DD2872A69F91966
[15:45:29] - Machine ID: 1
[15:45:29] 
[15:45:29] Loaded queue successfully.
[15:45:29] 
[15:45:29] - Autosending finished units... [January 17 15:45:29 UTC]
[15:45:29] + Processing work unit
[15:45:29] Trying to send all finished work units
[15:45:29] Core required: FahCore_a3.exe
[15:45:29] + No unsent completed units remaining.
[15:45:29] Core found.
[15:45:29] - Autosend completed
[15:45:29] Working on queue slot 05 [January 17 15:45:29 UTC]
[15:45:29] + Working ...
[15:45:29] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 3908 -version 630'

[15:45:29] 
[15:45:29] *------------------------------*
[15:45:29] Folding@Home Gromacs SMP Core
[15:45:29] Version 2.22 (Mar 12, 2010)
[15:45:29] 
[15:45:29] Preparing to commence simulation
[15:45:29] - Ensuring status. Please wait.
[15:45:39] - Looking at optimizations...
[15:45:39] - Working with standard loops on this execution.
[15:45:39] - Previous termination of core was improper.
[15:45:39] - Files status OK
[15:45:43] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[15:45:43] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[15:45:43] - Digital signature verified
[15:45:43] 
[15:45:43] Project: 6900 (Run 18, Clone 6, Gen 20)
[15:45:43] 
[15:45:43] Entering M.D.
[15:45:49] Using Gromacs checkpoints
[15:45:53] Resuming from checkpoint
[15:45:53] Verified work/wudata_05.log
[15:45:53] Verified work/wudata_05.trr
[15:45:53] Verified work/wudata_05.xtc
[15:45:53] Verified work/wudata_05.edr
[15:45:54] Completed 88180 out of 250000 steps  (35%)
[16:02:46] Completed 90000 out of 250000 steps  (36%)
[16:27:00] Completed 92500 out of 250000 steps  (37%)
[16:50:59] Completed 95000 out of 250000 steps  (38%)
[17:15:20] Completed 97500 out of 250000 steps  (39%)
[17:39:21] Completed 100000 out of 250000 steps  (40%)
[18:03:26] Completed 102500 out of 250000 steps  (41%)
[18:27:28] Completed 105000 out of 250000 steps  (42%)
[18:51:31] Completed 107500 out of 250000 steps  (43%)
[19:15:37] Completed 110000 out of 250000 steps  (44%)
[19:39:53] Completed 112500 out of 250000 steps  (45%)


--- Opening Log file [January 17 22:14:31 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[22:14:31] - Ask before connecting: No
[22:14:31] - User name: Standin_wave (Team 35947)
[22:14:31] - User ID: 4DD2872A69F91966
[22:14:31] - Machine ID: 1
[22:14:31] 
[22:14:32] Loaded queue successfully.
[22:14:32] 
[22:14:32] - Autosending finished units... [January 17 22:14:32 UTC]
[22:14:32] + Processing work unit
[22:14:32] Trying to send all finished work units
[22:14:32] Core required: FahCore_a3.exe
[22:14:32] + No unsent completed units remaining.
[22:14:32] Core found.
[22:14:32] - Autosend completed
[22:14:32] Working on queue slot 05 [January 17 22:14:32 UTC]
[22:14:32] + Working ...
[22:14:32] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 1152 -version 630'

[22:14:32] 
[22:14:32] *------------------------------*
[22:14:32] Folding@Home Gromacs SMP Core
[22:14:32] Version 2.22 (Mar 12, 2010)
[22:14:32] 
[22:14:32] Preparing to commence simulation
[22:14:32] - Ensuring status. Please wait.
[22:14:41] - Looking at optimizations...
[22:14:41] - Working with standard loops on this execution.
[22:14:41] - Previous termination of core was improper.
[22:14:41] - Going to use standard loops.
[22:14:41] - Files status OK
[22:14:46] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[22:14:46] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[22:14:46] - Digital signature verified
[22:14:46] 
[22:14:46] Project: 6900 (Run 18, Clone 6, Gen 20)
[22:14:46] 
[22:14:46] Entering M.D.
[22:14:51] Using Gromacs checkpoints
[22:14:57] Resuming from checkpoint
[22:14:58] Verified work/wudata_05.log
[22:14:58] Verified work/wudata_05.trr
[22:14:58] Verified work/wudata_05.xtc
[22:14:58] Verified work/wudata_05.edr
[22:14:59] Completed 113740 out of 250000 steps  (45%)
[22:27:21] Completed 115000 out of 250000 steps  (46%)
[22:51:38] Completed 117500 out of 250000 steps  (47%)
[23:15:52] Completed 120000 out of 250000 steps  (48%)
[23:40:06] Completed 122500 out of 250000 steps  (49%)
[00:04:19] Completed 125000 out of 250000 steps  (50%)
[00:28:26] Completed 127500 out of 250000 steps  (51%)
[00:52:56] Completed 130000 out of 250000 steps  (52%)
[01:17:08] Completed 132500 out of 250000 steps  (53%)
[01:41:23] Completed 135000 out of 250000 steps  (54%)
[02:05:35] Completed 137500 out of 250000 steps  (55%)
[02:29:48] Completed 140000 out of 250000 steps  (56%)
[02:54:00] Completed 142500 out of 250000 steps  (57%)
[03:18:16] Completed 145000 out of 250000 steps  (58%)
[03:42:31] Completed 147500 out of 250000 steps  (59%)
[04:06:54] Completed 150000 out of 250000 steps  (60%)
[04:14:32] - Autosending finished units... [January 18 04:14:32 UTC]
[04:14:32] Trying to send all finished work units
[04:14:32] + No unsent completed units remaining.
[04:14:32] - Autosend completed
[04:31:17] Completed 152500 out of 250000 steps  (61%)


--- Opening Log file [January 18 12:49:18 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[12:49:18] - Ask before connecting: No
[12:49:18] - User name: Standin_wave (Team 35947)
[12:49:18] - User ID: 4DD2872A69F91966
[12:49:18] - Machine ID: 1
[12:49:18] 
[12:49:18] Loaded queue successfully.
[12:49:18] 
[12:49:18] - Autosending finished units... [January 18 12:49:18 UTC]
[12:49:18] + Processing work unit
[12:49:18] Trying to send all finished work units
[12:49:18] Core required: FahCore_a3.exe
[12:49:18] + No unsent completed units remaining.
[12:49:18] Core found.
[12:49:18] - Autosend completed
[12:49:18] Working on queue slot 05 [January 18 12:49:18 UTC]
[12:49:18] + Working ...
[12:49:18] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 1392 -version 630'

[12:49:18] 
[12:49:18] *------------------------------*
[12:49:18] Folding@Home Gromacs SMP Core
[12:49:18] Version 2.22 (Mar 12, 2010)
[12:49:18] 
[12:49:18] Preparing to commence simulation
[12:49:18] - Ensuring status. Please wait.
[12:49:28] - Looking at optimizations...
[12:49:28] - Working with standard loops on this execution.
[12:49:28] - Previous termination of core was improper.
[12:49:28] - Going to use standard loops.
[12:49:28] - Files status OK
[12:49:31] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[12:49:31] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[12:49:32] - Digital signature verified
[12:49:32] 
[12:49:32] Project: 6900 (Run 18, Clone 6, Gen 20)
[12:49:32] 
[12:49:32] Entering M.D.
[12:49:38] Using Gromacs checkpoints
[12:49:43] Resuming from checkpoint
[12:49:44] Verified work/wudata_05.log
[12:49:44] Verified work/wudata_05.trr
[12:49:44] Verified work/wudata_05.xtc
[12:49:44] Verified work/wudata_05.edr
[12:49:45] Completed 152370 out of 250000 steps  (60%)
[12:51:01] Completed 152500 out of 250000 steps  (61%)
[13:15:38] Completed 155000 out of 250000 steps  (62%)
[13:40:04] Completed 157500 out of 250000 steps  (63%)
[14:04:29] Completed 160000 out of 250000 steps  (64%)
[14:29:13] Completed 162500 out of 250000 steps  (65%)
[14:52:16] Completed 165000 out of 250000 steps  (66%)
[15:13:52] Completed 167500 out of 250000 steps  (67%)
[22:51:41] + Attempting to send results [January 16 22:51:41 UTC]
[22:51:41] - Reading file work/wuresults_04.dat from core
[22:51:41]   (Read 100148038 bytes from disk)
[22:51:41] Connecting to http://171.67.108.22:8080/
[23:05:12] Posted data.
[23:05:12] Initial: 0000; - Uploaded at ~119 kB/s
[23:05:17] - Averaged speed for that direction ~120 kB/s
[23:05:17] + Results successfully sent
[23:05:17] Thank you for your contribution to Folding@Home.
[23:05:17] + Number of Units Completed: 4

[23:05:24] Trying to send all finished work units
[23:05:24] + No unsent completed units remaining.
[23:05:24] - Preparing to get new work unit...
[23:05:24] Cleaning up work directory
[23:05:24] + Attempting to get work packet
[23:05:24] Passkey found
[23:05:24] - Will indicate memory of 12279 MB
[23:05:24] - Connecting to assignment server
[23:05:24] Connecting to http://assign.stanford.edu:8080/
[23:05:25] Posted data.
[23:05:25] Initial: ED82; - Successful: assigned to (130.237.232.141).
[23:05:25] + News From Folding@Home: Welcome to Folding@Home
[23:05:25] Loaded queue successfully.
[23:05:25] Sent data
[23:05:25] Connecting to http://130.237.232.141:8080/
[23:05:32] Posted data.
[23:05:32] Initial: 0000; - Receiving payload (expected size: 24865674)
[23:07:31] - Downloaded at ~204 kB/s
[23:07:31] - Averaged speed for that direction ~503 kB/s
[23:07:31] + Received work.
[23:07:31] Trying to send all finished work units
[23:07:31] + No unsent completed units remaining.
[23:07:31] + Closed connections
[23:07:31] 
[23:07:31] + Processing work unit
[23:07:31] Core required: FahCore_a3.exe
[23:07:31] Core found.
[23:07:31] Working on queue slot 05 [January 16 23:07:31 UTC]
[23:07:31] + Working ...
[23:07:31] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 3176 -version 630'

[23:07:31] 
[23:07:31] *------------------------------*
[23:07:31] Folding@Home Gromacs SMP Core
[23:07:31] Version 2.22 (Mar 12, 2010)
[23:07:31] 
[23:07:31] Preparing to commence simulation
[23:07:31] - Looking at optimizations...
[23:07:31] - Created dyn
[23:07:31] - Files status OK
[23:07:35] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[23:07:35] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[23:07:36] - Digital signature verified
[23:07:36] 
[23:07:36] Project: 6900 (Run 18, Clone 6, Gen 20)
[23:07:36] 
[23:07:36] Assembly optimizations on if available.
[23:07:36] Entering M.D.
[23:07:45] Completed 0 out of 250000 steps  (0%)
[23:33:45] Completed 2500 out of 250000 steps  (1%)
[23:59:42] Completed 5000 out of 250000 steps  (2%)
[00:25:48] Completed 7500 out of 250000 steps  (3%)
[00:51:46] Completed 10000 out of 250000 steps  (4%)
[01:17:47] Completed 12500 out of 250000 steps  (5%)
[01:43:41] Completed 15000 out of 250000 steps  (6%)
[02:08:33] - Autosending finished units... [January 17 02:08:33 UTC]
[02:08:33] Trying to send all finished work units
[02:08:33] + No unsent completed units remaining.
[02:08:33] - Autosend completed
[02:09:37] Completed 17500 out of 250000 steps  (7%)
[02:35:35] Completed 20000 out of 250000 steps  (8%)
[03:01:30] Completed 22500 out of 250000 steps  (9%)
[03:27:27] Completed 25000 out of 250000 steps  (10%)
[03:53:22] Completed 27500 out of 250000 steps  (11%)
[04:19:17] Completed 30000 out of 250000 steps  (12%)
[04:45:13] Completed 32500 out of 250000 steps  (13%)
[05:11:11] Completed 35000 out of 250000 steps  (14%)
[05:37:23] Completed 37500 out of 250000 steps  (15%)
[06:03:18] Completed 40000 out of 250000 steps  (16%)
[06:29:16] Completed 42500 out of 250000 steps  (17%)
[06:55:12] Completed 45000 out of 250000 steps  (18%)
[07:21:13] Completed 47500 out of 250000 steps  (19%)
[07:47:07] Completed 50000 out of 250000 steps  (20%)
[08:08:33] - Autosending finished units... [January 17 08:08:33 UTC]
[08:08:33] Trying to send all finished work units
[08:08:33] + No unsent completed units remaining.
[08:08:33] - Autosend completed
[08:13:05] Completed 52500 out of 250000 steps  (21%)
[08:39:01] Completed 55000 out of 250000 steps  (22%)
[09:05:00] Completed 57500 out of 250000 steps  (23%)
[09:30:55] Completed 60000 out of 250000 steps  (24%)
[09:56:53] Completed 62500 out of 250000 steps  (25%)
[10:23:07] Completed 65000 out of 250000 steps  (26%)


--- Opening Log file [January 17 10:56:54 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[10:56:54] - Ask before connecting: No
[10:56:54] - User name: Standin_wave (Team 35947)
[10:56:54] - User ID: 4DD2872A69F91966
[10:56:54] - Machine ID: 1
[10:56:54] 
[10:56:54] Loaded queue successfully.
[10:56:54] 
[10:56:54] - Autosending finished units... [January 17 10:56:54 UTC]
[10:56:54] + Processing work unit
[10:56:54] Trying to send all finished work units
[10:56:54] Core required: FahCore_a3.exe
[10:56:54] + No unsent completed units remaining.
[10:56:54] Core found.
[10:56:54] - Autosend completed
[10:56:54] Working on queue slot 05 [January 17 10:56:54 UTC]
[10:56:54] + Working ...
[10:56:54] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 2808 -version 630'

[10:56:54] 
[10:56:54] *------------------------------*
[10:56:54] Folding@Home Gromacs SMP Core
[10:56:54] Version 2.22 (Mar 12, 2010)
[10:56:54] 
[10:56:54] Preparing to commence simulation
[10:56:54] - Looking at optimizations...
[10:56:54] - Files status OK
[10:56:58] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[10:56:58] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[10:56:58] - Digital signature verified
[10:56:58] 
[10:56:58] Project: 6900 (Run 18, Clone 6, Gen 20)
[10:56:58] 
[10:56:59] Assembly optimizations on if available.
[10:56:59] Entering M.D.
[10:57:04] Using Gromacs checkpoints
[10:57:10] Resuming from checkpoint
[10:57:10] Verified work/wudata_05.log
[10:57:11] Verified work/wudata_05.trr
[10:57:11] Verified work/wudata_05.xtc
[10:57:11] Verified work/wudata_05.edr
[10:57:11] Completed 67280 out of 250000 steps  (26%)
[10:59:33] Completed 67500 out of 250000 steps  (27%)


--- Opening Log file [January 17 11:06:15 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[11:06:15] - Ask before connecting: No
[11:06:15] - User name: Standin_wave (Team 35947)
[11:06:15] - User ID: 4DD2872A69F91966
[11:06:15] - Machine ID: 1
[11:06:15] 
[11:06:15] Loaded queue successfully.
[11:06:15] 
[11:06:15] - Autosending finished units... [January 17 11:06:15 UTC]
[11:06:15] + Processing work unit
[11:06:15] Trying to send all finished work units
[11:06:15] Core required: FahCore_a3.exe
[11:06:15] + No unsent completed units remaining.
[11:06:15] Core found.
[11:06:15] - Autosend completed
[11:06:15] Working on queue slot 05 [January 17 11:06:15 UTC]
[11:06:15] + Working ...
[11:06:15] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 3084 -version 630'

[11:06:15] 
[11:06:15] *------------------------------*
[11:06:15] Folding@Home Gromacs SMP Core
[11:06:15] Version 2.22 (Mar 12, 2010)
[11:06:15] 
[11:06:15] Preparing to commence simulation
[11:06:15] - Looking at optimizations...
[11:06:15] - Files status OK
[11:06:19] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[11:06:19] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[11:06:19] - Digital signature verified
[11:06:19] 
[11:06:19] Project: 6900 (Run 18, Clone 6, Gen 20)
[11:06:19] 
[11:06:20] Assembly optimizations on if available.
[11:06:20] Entering M.D.
[11:06:26] Using Gromacs checkpoints
[11:06:31] Resuming from checkpoint
[11:06:32] Verified work/wudata_05.log
[11:06:32] Verified work/wudata_05.trr
[11:06:32] Verified work/wudata_05.xtc
[11:06:32] Verified work/wudata_05.edr
[11:06:33] Completed 67835 out of 250000 steps  (27%)
[11:26:42] Completed 70000 out of 250000 steps  (28%)
[11:49:11] Completed 72500 out of 250000 steps  (29%)
[12:11:45] Completed 75000 out of 250000 steps  (30%)
[12:34:06] Completed 77500 out of 250000 steps  (31%)
[12:56:27] Completed 80000 out of 250000 steps  (32%)
[13:18:50] Completed 82500 out of 250000 steps  (33%)
[13:41:09] Completed 85000 out of 250000 steps  (34%)
[14:03:28] Completed 87500 out of 250000 steps  (35%)


--- Opening Log file [January 17 15:45:29 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[15:45:29] - Ask before connecting: No
[15:45:29] - User name: Standin_wave (Team 35947)
[15:45:29] - User ID: 4DD2872A69F91966
[15:45:29] - Machine ID: 1
[15:45:29] 
[15:45:29] Loaded queue successfully.
[15:45:29] 
[15:45:29] - Autosending finished units... [January 17 15:45:29 UTC]
[15:45:29] + Processing work unit
[15:45:29] Trying to send all finished work units
[15:45:29] Core required: FahCore_a3.exe
[15:45:29] + No unsent completed units remaining.
[15:45:29] Core found.
[15:45:29] - Autosend completed
[15:45:29] Working on queue slot 05 [January 17 15:45:29 UTC]
[15:45:29] + Working ...
[15:45:29] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 3908 -version 630'

[15:45:29] 
[15:45:29] *------------------------------*
[15:45:29] Folding@Home Gromacs SMP Core
[15:45:29] Version 2.22 (Mar 12, 2010)
[15:45:29] 
[15:45:29] Preparing to commence simulation
[15:45:29] - Ensuring status. Please wait.
[15:45:39] - Looking at optimizations...
[15:45:39] - Working with standard loops on this execution.
[15:45:39] - Previous termination of core was improper.
[15:45:39] - Files status OK
[15:45:43] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[15:45:43] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[15:45:43] - Digital signature verified
[15:45:43] 
[15:45:43] Project: 6900 (Run 18, Clone 6, Gen 20)
[15:45:43] 
[15:45:43] Entering M.D.
[15:45:49] Using Gromacs checkpoints
[15:45:53] Resuming from checkpoint
[15:45:53] Verified work/wudata_05.log
[15:45:53] Verified work/wudata_05.trr
[15:45:53] Verified work/wudata_05.xtc
[15:45:53] Verified work/wudata_05.edr
[15:45:54] Completed 88180 out of 250000 steps  (35%)
[16:02:46] Completed 90000 out of 250000 steps  (36%)
[16:27:00] Completed 92500 out of 250000 steps  (37%)
[16:50:59] Completed 95000 out of 250000 steps  (38%)
[17:15:20] Completed 97500 out of 250000 steps  (39%)
[17:39:21] Completed 100000 out of 250000 steps  (40%)
[18:03:26] Completed 102500 out of 250000 steps  (41%)
[18:27:28] Completed 105000 out of 250000 steps  (42%)
[18:51:31] Completed 107500 out of 250000 steps  (43%)
[19:15:37] Completed 110000 out of 250000 steps  (44%)
[19:39:53] Completed 112500 out of 250000 steps  (45%)


--- Opening Log file [January 17 22:14:31 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[22:14:31] - Ask before connecting: No
[22:14:31] - User name: Standin_wave (Team 35947)
[22:14:31] - User ID: 4DD2872A69F91966
[22:14:31] - Machine ID: 1
[22:14:31] 
[22:14:32] Loaded queue successfully.
[22:14:32] 
[22:14:32] - Autosending finished units... [January 17 22:14:32 UTC]
[22:14:32] + Processing work unit
[22:14:32] Trying to send all finished work units
[22:14:32] Core required: FahCore_a3.exe
[22:14:32] + No unsent completed units remaining.
[22:14:32] Core found.
[22:14:32] - Autosend completed
[22:14:32] Working on queue slot 05 [January 17 22:14:32 UTC]
[22:14:32] + Working ...
[22:14:32] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 1152 -version 630'

[22:14:32] 
[22:14:32] *------------------------------*
[22:14:32] Folding@Home Gromacs SMP Core
[22:14:32] Version 2.22 (Mar 12, 2010)
[22:14:32] 
[22:14:32] Preparing to commence simulation
[22:14:32] - Ensuring status. Please wait.
[22:14:41] - Looking at optimizations...
[22:14:41] - Working with standard loops on this execution.
[22:14:41] - Previous termination of core was improper.
[22:14:41] - Going to use standard loops.
[22:14:41] - Files status OK
[22:14:46] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[22:14:46] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[22:14:46] - Digital signature verified
[22:14:46] 
[22:14:46] Project: 6900 (Run 18, Clone 6, Gen 20)
[22:14:46] 
[22:14:46] Entering M.D.
[22:14:51] Using Gromacs checkpoints
[22:14:57] Resuming from checkpoint
[22:14:58] Verified work/wudata_05.log
[22:14:58] Verified work/wudata_05.trr
[22:14:58] Verified work/wudata_05.xtc
[22:14:58] Verified work/wudata_05.edr
[22:14:59] Completed 113740 out of 250000 steps  (45%)
[22:27:21] Completed 115000 out of 250000 steps  (46%)
[22:51:38] Completed 117500 out of 250000 steps  (47%)
[23:15:52] Completed 120000 out of 250000 steps  (48%)
[23:40:06] Completed 122500 out of 250000 steps  (49%)
[00:04:19] Completed 125000 out of 250000 steps  (50%)
[00:28:26] Completed 127500 out of 250000 steps  (51%)
[00:52:56] Completed 130000 out of 250000 steps  (52%)
[01:17:08] Completed 132500 out of 250000 steps  (53%)
[01:41:23] Completed 135000 out of 250000 steps  (54%)
[02:05:35] Completed 137500 out of 250000 steps  (55%)
[02:29:48] Completed 140000 out of 250000 steps  (56%)
[02:54:00] Completed 142500 out of 250000 steps  (57%)
[03:18:16] Completed 145000 out of 250000 steps  (58%)
[03:42:31] Completed 147500 out of 250000 steps  (59%)
[04:06:54] Completed 150000 out of 250000 steps  (60%)
[04:14:32] - Autosending finished units... [January 18 04:14:32 UTC]
[04:14:32] Trying to send all finished work units
[04:14:32] + No unsent completed units remaining.
[04:14:32] - Autosend completed
[04:31:17] Completed 152500 out of 250000 steps  (61%)


--- Opening Log file [January 18 12:49:18 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[12:49:18] - Ask before connecting: No
[12:49:18] - User name: Standin_wave (Team 35947)
[12:49:18] - User ID: 4DD2872A69F91966
[12:49:18] - Machine ID: 1
[12:49:18] 
[12:49:18] Loaded queue successfully.
[12:49:18] 
[12:49:18] - Autosending finished units... [January 18 12:49:18 UTC]
[12:49:18] + Processing work unit
[12:49:18] Trying to send all finished work units
[12:49:18] Core required: FahCore_a3.exe
[12:49:18] + No unsent completed units remaining.
[12:49:18] Core found.
[12:49:18] - Autosend completed
[12:49:18] Working on queue slot 05 [January 18 12:49:18 UTC]
[12:49:18] + Working ...
[12:49:18] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 1392 -version 630'

[12:49:18] 
[12:49:18] *------------------------------*
[12:49:18] Folding@Home Gromacs SMP Core
[12:49:18] Version 2.22 (Mar 12, 2010)
[12:49:18] 
[12:49:18] Preparing to commence simulation
[12:49:18] - Ensuring status. Please wait.
[12:49:28] - Looking at optimizations...
[12:49:28] - Working with standard loops on this execution.
[12:49:28] - Previous termination of core was improper.
[12:49:28] - Going to use standard loops.
[12:49:28] - Files status OK
[12:49:31] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[12:49:31] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[12:49:32] - Digital signature verified
[12:49:32] 
[12:49:32] Project: 6900 (Run 18, Clone 6, Gen 20)
[12:49:32] 
[12:49:32] Entering M.D.
[12:49:38] Using Gromacs checkpoints
[12:49:43] Resuming from checkpoint
[12:49:44] Verified work/wudata_05.log
[12:49:44] Verified work/wudata_05.trr
[12:49:44] Verified work/wudata_05.xtc
[12:49:44] Verified work/wudata_05.edr
[12:49:45] Completed 152370 out of 250000 steps  (60%)
[12:51:01] Completed 152500 out of 250000 steps  (61%)
[13:15:38] Completed 155000 out of 250000 steps  (62%)
[13:40:04] Completed 157500 out of 250000 steps  (63%)
[14:04:29] Completed 160000 out of 250000 steps  (64%)
[14:29:13] Completed 162500 out of 250000 steps  (65%)
[14:52:16] Completed 165000 out of 250000 steps  (66%)
[15:13:52] Completed 167500 out of 250000 steps  (67%)
--- Opening Log file [January 18 17:32:03 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[17:32:03] - Ask before connecting: No
[17:32:03] - User name: Standin_wave (Team 35947)
[17:32:03] - User ID: 4DD2872A69F91966
[17:32:03] - Machine ID: 1
[17:32:03] 
[17:32:03] Loaded queue successfully.
[17:32:03] 
[17:32:03] - Autosending finished units... [January 18 17:32:03 UTC]
[17:32:03] + Processing work unit
[17:32:03] Trying to send all finished work units
[17:32:03] Core required: FahCore_a3.exe
[17:32:03] + No unsent completed units remaining.
[17:32:03] Core found.
[17:32:03] - Autosend completed
[17:32:03] Working on queue slot 05 [January 18 17:32:03 UTC]
[17:32:03] + Working ...
[17:32:03] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 3184 -version 630'

[17:32:03] 
[17:32:03] *------------------------------*
[17:32:03] Folding@Home Gromacs SMP Core
[17:32:03] Version 2.22 (Mar 12, 2010)
[17:32:03] 
[17:32:03] Preparing to commence simulation
[17:32:03] - Ensuring status. Please wait.
[17:32:13] - Looking at optimizations...
[17:32:13] - Working with standard loops on this execution.
[17:32:13] - Previous termination of core was improper.
[17:32:13] - Going to use standard loops.
[17:32:13] - Files status OK
[17:32:16] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[17:32:16] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[17:32:17] - Digital signature verified
[17:32:17] 
[17:32:17] Project: 6900 (Run 18, Clone 6, Gen 20)
[17:32:17] 
[17:32:17] Entering M.D.
[17:32:23] Using Gromacs checkpoints
[17:32:28] Resuming from checkpoint
[17:32:29] Verified work/wudata_05.log
[17:32:29] Verified work/wudata_05.trr
[17:32:29] Verified work/wudata_05.xtc
[17:32:29] Verified work/wudata_05.edr
[17:32:30] Completed 167490 out of 250000 steps  (66%)
[17:32:41] Completed 167500 out of 250000 steps  (67%)
[17:57:05] Completed 170000 out of 250000 steps  (68%)
[18:21:08] Completed 172500 out of 250000 steps  (69%)
[18:45:09] Completed 175000 out of 250000 steps  (70%)
[19:09:09] Completed 177500 out of 250000 steps  (71%)
[19:33:24] Completed 180000 out of 250000 steps  (72%)
[19:57:24] Completed 182500 out of 250000 steps  (73%)
[20:21:25] Completed 185000 out of 250000 steps  (74%)
[20:45:28] Completed 187500 out of 250000 steps  (75%)
[21:09:48] Completed 190000 out of 250000 steps  (76%)
[21:34:06] Completed 192500 out of 250000 steps  (77%)
[21:58:24] Completed 195000 out of 250000 steps  (78%)
[22:22:46] Completed 197500 out of 250000 steps  (79%)
[22:47:13] Completed 200000 out of 250000 steps  (80%)
[23:11:41] Completed 202500 out of 250000 steps  (81%)
[23:32:03] - Autosending finished units... [January 18 23:32:03 UTC]
[23:32:03] Trying to send all finished work units
[23:32:03] + No unsent completed units remaining.
[23:32:03] - Autosend completed
[23:36:10] Completed 205000 out of 250000 steps  (82%)
[00:00:27] Completed 207500 out of 250000 steps  (83%)


--- Opening Log file [January 19 08:33:53 UTC] 


# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.30

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP
Executable: C:\Users\Howard\AppData\Roaming\FoldingAtHome\FAH6.30SMP\FAHSMP.exe
Arguments: -smp -verbosity 9 -bigadv -smp 

[08:33:53] - Ask before connecting: No
[08:33:53] - User name: Standin_wave (Team 35947)
[08:33:53] - User ID: 4DD2872A69F91966
[08:33:53] - Machine ID: 1
[08:33:53] 
[08:33:53] Loaded queue successfully.
[08:33:53] 
[08:33:53] - Autosending finished units... [January 19 08:33:53 UTC]
[08:33:53] + Processing work unit
[08:33:53] Trying to send all finished work units
[08:33:53] Core required: FahCore_a3.exe
[08:33:53] + No unsent completed units remaining.
[08:33:53] Core found.
[08:33:53] - Autosend completed
[08:33:53] Working on queue slot 05 [January 19 08:33:53 UTC]
[08:33:53] + Working ...
[08:33:53] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 12 -checkpoint 3 -verbose -lifeline 4012 -version 630'

[08:33:53] 
[08:33:53] *------------------------------*
[08:33:53] Folding@Home Gromacs SMP Core
[08:33:53] Version 2.22 (Mar 12, 2010)
[08:33:53] 
[08:33:53] Preparing to commence simulation
[08:33:53] - Ensuring status. Please wait.
[08:34:03] - Looking at optimizations...
[08:34:03] - Working with standard loops on this execution.
[08:34:03] - Previous termination of core was improper.
[08:34:03] - Going to use standard loops.
[08:34:03] - Files status OK
[08:34:06] - Expanded 24865162 -> 30796293 (decompressed 123.8 percent)
[08:34:06] Called DecompressByteArray: compressed_data_size=24865162 data_size=30796293, decompressed_data_size=30796293 diff=0
[08:34:07] - Digital signature verified
[08:34:07] 
[08:34:07] Project: 6900 (Run 18, Clone 6, Gen 20)
[08:34:07] 
[08:34:07] Entering M.D.
[08:34:13] Using Gromacs checkpoints
[08:34:19] Resuming from checkpoint
[08:34:19] Verified work/wudata_05.log
[08:34:19] Verified work/wudata_05.trr
[08:34:20] Verified work/wudata_05.xtc
[08:34:20] Verified work/wudata_05.edr
[08:34:20] Completed 208640 out of 250000 steps  (83%)
[08:47:51] Completed 210000 out of 250000 steps  (84%)
[09:12:25] Completed 212500 out of 250000 steps  (85%)
[09:36:15] Completed 215000 out of 250000 steps  (86%)
[09:59:32] Completed 217500 out of 250000 steps  (87%)
[10:21:38] Completed 220000 out of 250000 steps  (88%)
[10:46:32] Completed 222500 out of 250000 steps  (89%)
[11:15:29] Completed 225000 out of 250000 steps  (90%)
[11:44:26] Completed 227500 out of 250000 steps  (91%)
[12:13:16] Completed 230000 out of 250000 steps  (92%)
[12:42:24] Completed 232500 out of 250000 steps  (93%)
[13:11:16] Completed 235000 out of 250000 steps  (94%)
[13:40:03] Completed 237500 out of 250000 steps  (95%)
[14:08:57] Completed 240000 out of 250000 steps  (96%)
[14:33:53] - Autosending finished units... [January 19 14:33:53 UTC]
[14:33:53] Trying to send all finished work units
[14:33:53] + No unsent completed units remaining.
[14:33:53] - Autosend completed
[14:38:11] Completed 242500 out of 250000 steps  (97%)
[15:07:06] Completed 245000 out of 250000 steps  (98%)
[15:32:44] Completed 247500 out of 250000 steps  (99%)
[15:58:10] Completed 250000 out of 250000 steps  (100%)
[15:58:20] DynamicWrapper: Finished Work Unit: sleep=10000
[15:58:30] 
[15:58:30] Finished Work Unit:
[15:58:30] - Reading up to 52713120 from "work/wudata_05.trr": Read 52713120
[15:58:30] trr file hash check passed.
[15:58:30] - Reading up to 47065920 from "work/wudata_05.xtc": Read 47065920
[15:58:31] xtc file hash check passed.
[15:58:31] edr file hash check passed.
[15:58:31] logfile size: 249764
[15:58:31] Leaving Run
[15:58:32] - Writing 100196744 bytes of core data to disk...
[15:58:33]   ... Done.
[15:58:39] - Shutting down core
[15:58:39] 
[15:58:39] Folding@home Core Shutdown: FINISHED_UNIT
[15:58:43] CoreStatus = 64 (100)
[15:58:43] Unit 5 finished with 55 percent of time to deadline remaining.
[15:58:43] Updated performance fraction: 0.545714
[15:58:43] Sending work to server
[15:58:43] Project: 6900 (Run 18, Clone 6, Gen 20)


[15:58:43] + Attempting to send results [January 19 15:58:43 UTC]
[15:58:43] - Reading file work/wuresults_05.dat from core
[15:58:43]   (Read 100196744 bytes from disk)
[15:58:43] Connecting to http://130.237.232.141:8080/
[16:12:18] Posted data.
[16:12:19] Initial: 0000; - Uploaded at ~119 kB/s
[16:12:19] - Averaged speed for that direction ~120 kB/s
[16:12:19] + Results successfully sent
[16:12:19] Thank you for your contribution to Folding@Home.
[16:12:19] + Number of Units Completed: 5

[16:12:25] Trying to send all finished work units
[16:12:25] + No unsent completed units remaining.
[16:12:25] - Preparing to get new work unit...
[16:12:25] Cleaning up work directory
[16:12:25] + Attempting to get work packet
[16:12:25] Passkey found
[16:12:25] - Will indicate memory of 12279 MB
[16:12:25] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 12, Stepping: 2
[16:12:25] - Connecting to assignment server
[16:12:25] Connecting to http://assign.stanford.edu:8080/
[16:12:26] Posted data.
[16:12:26] Initial: 40AB; - Successful: assigned to (171.64.65.54).
[16:12:26] + News From Folding@Home: Welcome to Folding@Home
[16:12:26] Loaded queue successfully.
[16:12:26] Sent data
[16:12:26] Connecting to http://171.64.65.54:8080/
[16:12:28] Posted data.
[16:12:28] Initial: 0000; - Receiving payload (expected size: 1772083)
[16:12:38] - Downloaded at ~173 kB/s
[16:12:38] - Averaged speed for that direction ~437 kB/s
[16:12:38] + Received work.
[16:12:38] Trying to send all finished work units
[16:12:38] + No unsent completed units remaining.
[16:12:38] + Closed connections
[16:12:38]
And finished Jan 19th 16:12 UTC i.e. about 2 & 3/4 days. I don't appear to have had ANY points so far as I can tell, and def no expected bonus of maybe 50,000 to 60,000 points. Could someone look into this, it is the second one I've 'lost' and I have only done 5 bigadv WUs so far. It is disheartening!

Re: Project: 6900 (Run 18, Clone 6, Gen 20)

Posted: Thu Jan 20, 2011 9:50 pm
by toTOW
First report, EUE :

Hi Standin_wave (team 35947),
Your WU (P6900 R18 C6 G20) was added to the stats database on 2011-01-17 12:06:28 for 4085.27 points of credit.

Second attempt, no points, naturally when you report the same results twice :
Hi Standin_wave (team 35947),
Your WU (P6900 R18 C6 G20) was added to the stats database on 2011-01-19 09:06:32 for 0 points of credit.

Re: Project: 6900 (Run 18, Clone 6, Gen 20)

Posted: Thu Jan 20, 2011 11:28 pm
by Standinwave
Hi, I seem to have had a similar issue with another WU in that there is absolutely no mention in the logs of any WU being uploaded and yet partially completed results are added (I think UK is 8hrs ahead of your database timings) when the computer isn't even working - then to make matters worse, it carries on to completion and I am none the wiser. The log states (at 16:12:19) that this machine has submitted five completed WUs and HFM.NET says these are P6900 34/8/7 (finished too late 10/01/2011 10:27UTC), P6900 6/16/17 (finished 12/01/2011 14:14UTC), P6900 8/15/21 (finished 14/01/2011 09:02UTC) , P2684 14/18/30 (finished 16/01/2011 22:51UTC) and finally P6900 18/6/20 (finished 19/01/2011 15:58UTC). Since then I have had P6021 0/92/361 (finished 19/01/2011 19:43 UTC) and P6054 0/173/222 (deleted, but not by me) and am now on with p2684 0/17/50 (at 14% and still going). This machine is 'in quarantine' and nobody but me has access to it, never mind even knows what folding is! I'm just concerned that two bigadv WUs in four have apparently reported early to you and I have no record of it and then the WU goes on to complete. Have you any idea what could be happening or can I post any further info to help resolve this odd situation?

Re: Project: 6900 (Run 18, Clone 6, Gen 20)

Posted: Thu Jan 20, 2011 11:56 pm
by bruce
Is there any chance that you're backing up the FAH data and attempting to restore the backup and resume a WU after it crashes? That would explain both this problem and the other one I've already replied to.

The EULA prohibits manipulating FAH's files, and a simple backup/restore falls into that category. The FAH program is the only thing that's allowed to change the files and if there's an error, it is designed to give you partial credit and move on to another WU. Restoring a backup WILL NOT WORK.

To properly diagnose this issue, we need to see a continuous log which covers the period of time from the initial download and BOTH uploads mentioned in toTOW's post (above).
NOTE: The same WU was downloaded again at 2011-01-17 20:30:49 UTC

How many machines do you have running BigAdv?

Re: Project: 6900 (Run 18, Clone 6, Gen 20)

Posted: Fri Jan 21, 2011 8:07 am
by Standinwave
Hi Bruce, I can only afford the one machine capable of running bigadv! I have only set up this machine 'as normal' for folding. It is a Win 7 64 bit install. The intention with this machine as with my four others is to leave them on 24/7 to fold. I HAVE been having some issues with it rebooting for no known reason (posted on Experts Exchange btw). When it does, it restarts and is back at the Windows login prompt. The OS is on an SSD, so is quick, and the client starts pretty quickly, just as though the machine had been turned off. I don't really know why FAH starts the folding log and then sometimes a -Prev version (or a log2 occasionally), but I haven't edited out anything at all, just copied and pasted the log from the txt files into the post. I certainly wouldn't deliberately setup anything to backup FAH and basically cheat, I don't even have any backup on this machine (or any other one) as most mission critical stuff is on NAS RAID drives. None of my other machines are quick enough to run bigadv WUs so I cannot try them. This machine (i7 - 980X powered) has had issues from initial build. I thought folding would stress it. Maybe I need to resolve the rebooting as there is probably something too clever for its own good in Win 7 that is doing something I don't know about that is messing up folding. I have since put two GPU3 clients on the two GTX460 cards in it, so I could just leave them on and 'rest' the CPU and see if that is the issue?

Re: Project: 6900 (Run 18, Clone 6, Gen 20)

Posted: Fri Jan 21, 2011 10:45 am
by John_Weatherman
There are lots of people reporting online problems with Windows 7 64 bit and graphic card causing BSOD. I would suggest running just the SMP client without any cards (if you can) and then try just one. Make sure you have a note of the drivers and have updated Windows.

Re: Project: 6900 (Run 18, Clone 6, Gen 20)

Posted: Fri Jan 21, 2011 1:54 pm
by Standinwave
John_Weatherman wrote:There are lots of people reporting online problems with Windows 7 64 bit and graphic card causing BSOD. I would suggest running just the SMP client without any cards (if you can) and then try just one. Make sure you have a note of the drivers and have updated Windows.
I could try one, though I am gonna run memtest first. I had a period whilst folding of about 5 days without problems - whilst running bigadv all the time and with graphics cards IN PLACE, but not being used.

Where did you see other folks reporting problems as I haven't seen much in the UK?

Re: Project: 6900 (Run 18, Clone 6, Gen 20)

Posted: Fri Jan 21, 2011 2:14 pm
by John_Weatherman
Google the following - windows 7 64 bit dxgmms1.sys
Folding does create extra logs when something goes wrong (says he from experience!)

Re: Project: 6900 (Run 18, Clone 6, Gen 20)

Posted: Sun Jan 23, 2011 1:33 pm
by Standinwave
J-W - interesting, I'll investigate tonight when all is quiet!
All times are UTC
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited