Project: 6701 (Run 19, Clone 3, Gen 94)
Posted: Wed Nov 17, 2010 12:35 pm
This is a new system that has finished only 9 WUs. It is mildly OCed to 3300MHz and didn't show any errors before. FAHlog:
Code: Select all
[21:27:14] + Processing work unit
[21:27:14] Core required: FahCore_a3.exe
[21:27:14] Core found.
[21:27:14] Working on queue slot 09 [November 15 21:27:14 UTC]
[21:27:14] + Working ...
[21:27:14] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 09 -np 2 -checkpoint 15 -verbose -lifeline 3768 -version 630'
[21:27:14]
[21:27:14] *------------------------------*
[21:27:14] Folding@Home Gromacs SMP Core
[21:27:14] Version 2.26 (Nov. 4, 2010)
[21:27:14]
[21:27:14] Preparing to commence simulation
[21:27:14] - Looking at optimizations...
[21:27:14] - Created dyn
[21:27:14] - Files status OK
[21:27:15] - Expanded 763851 -> 1404481 (decompressed 183.8 percent)
[21:27:15] Called DecompressByteArray: compressed_data_size=763851 data_size=1404481, decompressed_data_size=1404481 diff=0
[21:27:15] - Digital signature verified
[21:27:15]
[21:27:15] Project: 6701 (Run 19, Clone 3, Gen 94)
[21:27:15]
[21:27:15] Assembly optimizations on if available.
[21:27:15] Entering M.D.
[21:27:21] Completed 0 out of 2000000 steps (0%)
SNIP
[23:01:09] Completed 80000 out of 2000000 steps (4%)
[23:15:52] - Autosending finished units... [November 15 23:15:52 UTC]
[23:15:52] Trying to send all finished work units
[23:15:52] + No unsent completed units remaining.
[23:15:52] - Autosend completed
[23:24:07] Completed 100000 out of 2000000 steps (5%)
SNIP
[05:09:35] Completed 400000 out of 2000000 steps (20%)
[05:15:52] - Autosending finished units... [November 16 05:15:52 UTC]
[05:15:52] Trying to send all finished work units
[05:15:52] + No unsent completed units remaining.
[05:15:52] - Autosend completed
[05:32:43] Completed 420000 out of 2000000 steps (21%)
SNIP
[10:55:20] Completed 700000 out of 2000000 steps (35%)
[11:15:52] - Autosending finished units... [November 16 11:15:52 UTC]
[11:15:52] Trying to send all finished work units
[11:15:52] + No unsent completed units remaining.
[11:15:52] - Autosend completed
[11:18:25] Completed 720000 out of 2000000 steps (36%)
SNIP
[17:03:45] Completed 1020000 out of 2000000 steps (51%)
[17:15:52] - Autosending finished units... [November 16 17:15:52 UTC]
[17:15:52] Trying to send all finished work units
[17:15:52] + No unsent completed units remaining.
[17:15:52] - Autosend completed
[17:27:13] Completed 1040000 out of 2000000 steps (52%)
SNIP
[23:05:05] Completed 1320000 out of 2000000 steps (66%)
[23:15:52] - Autosending finished units... [November 16 23:15:52 UTC]
[23:15:52] Trying to send all finished work units
[23:15:52] + No unsent completed units remaining.
[23:15:52] - Autosend completed
[23:28:41] Completed 1340000 out of 2000000 steps (67%)
SNIP
[04:50:27] Completed 1620000 out of 2000000 steps (81%)
[05:00:16] Gromacs cannot continue further.
[05:00:16] Going to send back what have done -- stepsTotalG=2000000
[05:00:16] Work fraction=0.8143 steps=2000000.
[05:00:20] logfile size=229198 infoLength=229198 edr=0 trr=23
[05:00:20] logfile size: 229198 info=229198 bed=0 hdr=23
[05:00:20] - Writing 229734 bytes of core data to disk...
[05:00:20] ... Done.
[05:00:21]
[05:00:21] Folding@home Core Shutdown: UNSTABLE_MACHINE
[05:00:23] CoreStatus = 7A (122)
[05:00:23] Sending work to server
[05:00:23] Project: 6701 (Run 19, Clone 3, Gen 94)
[05:00:23] + Attempting to send results [November 17 05:00:23 UTC]
[05:00:23] - Reading file work/wuresults_09.dat from core
[05:00:23] (Read 229734 bytes from disk)
[05:00:23] Connecting to http://171.64.65.56:8080/
[05:07:25] - Couldn't send HTTP request to server
[05:07:25] + Could not connect to Work Server (results)
[05:07:25] (171.64.65.56:8080)
[05:07:25] + Retrying using alternative port
[05:07:25] Connecting to http://171.64.65.56:80/
[05:12:05] - Couldn't send HTTP request to server
[05:12:05] + Could not connect to Work Server (results)
[05:12:05] (171.64.65.56:80)
[05:12:05] - Error: Could not transmit unit 09 (completed November 17) to work server.
[05:12:05] - 1 failed uploads of this unit.
[05:12:05] Keeping unit 09 in queue.
[05:12:05] Trying to send all finished work units
[05:12:05] Project: 6701 (Run 19, Clone 3, Gen 94)
[05:12:05] + Attempting to send results [November 17 05:12:05 UTC]
[05:12:05] - Reading file work/wuresults_09.dat from core
[05:12:05] (Read 229734 bytes from disk)
[05:12:05] Connecting to http://171.64.65.56:8080/
[05:12:26] - Couldn't send HTTP request to server
[05:12:26] + Could not connect to Work Server (results)
[05:12:26] (171.64.65.56:8080)
[05:12:26] + Retrying using alternative port
[05:12:26] Connecting to http://171.64.65.56:80/
[05:15:52] - Autosending finished units... [November 17 05:15:52 UTC]
[05:15:52] Trying to send all finished work units
[05:15:52] - Already sending work
[05:15:52] + Sent 0 of 1 completed units to the server
[05:15:52] - Autosend completed
[05:18:15] - Couldn't send HTTP request to server
[05:18:15] + Could not connect to Work Server (results)
[05:18:15] (171.64.65.56:80)
[05:18:15] - Error: Could not transmit unit 09 (completed November 17) to work server.
[05:18:15] - 2 failed uploads of this unit.
[05:18:15] + Attempting to send results [November 17 05:18:15 UTC]
[05:18:15] - Reading file work/wuresults_09.dat from core
[05:18:15] (Read 229734 bytes from disk)
[05:18:15] Connecting to http://171.67.108.25:8080/
[05:18:20] - Couldn't send HTTP request to server
[05:18:20] + Could not connect to Work Server (results)
[05:18:20] (171.67.108.25:8080)
[05:18:20] + Retrying using alternative port
[05:18:20] Connecting to http://171.67.108.25:80/
[05:18:25] - Couldn't send HTTP request to server
[05:18:25] (Got status 503)
[05:18:25] + Could not connect to Work Server (results)
[05:18:25] (171.67.108.25:80)
[05:18:25] Could not transmit unit 09 to Collection server; keeping in queue.
[05:18:25] + Sent 0 of 1 completed units to the server
[05:18:25] - Preparing to get new work unit...
[05:18:25] Cleaning up work directory
[05:18:25] + Attempting to get work packet
[05:18:25] Passkey found
[05:18:25] - Will indicate memory of 3292 MB
[05:18:25] - Connecting to assignment server
[05:18:25] Connecting to http://assign.stanford.edu:8080/
[05:18:49] - Couldn't send HTTP request to server
[05:18:49] + Could not connect to Assignment Server
[05:18:49] Connecting to http://assign2.stanford.edu:80/
[05:18:52] Posted data.
[05:18:52] Initial: 40AB; - Successful: assigned to (171.64.65.56).
[05:18:52] + News From Folding@Home: Welcome to Folding@Home
[05:18:52] Loaded queue successfully.
[05:18:52] Sent data
[05:18:52] Connecting to http://171.64.65.56:80/
[05:18:54] Posted data.
[05:18:54] Initial: 0000; - Receiving payload (expected size: 764199)
[05:20:06] - Downloaded at ~10 kB/s
[05:20:06] - Averaged speed for that direction ~38 kB/s
[05:20:06] + Received work.
[05:20:06] Trying to send all finished work units
[05:20:06] Project: 6701 (Run 19, Clone 3, Gen 94)
[05:20:06] + Attempting to send results [November 17 05:20:06 UTC]
[05:20:06] - Reading file work/wuresults_09.dat from core
[05:20:06] (Read 229734 bytes from disk)
[05:20:06] Connecting to http://171.64.65.56:8080/
[05:26:12] Posted data.
[05:26:12] Initial: 0000; - Uploaded at ~0 kB/s
[05:26:13] - Averaged speed for that direction ~9 kB/s
[05:26:13] + Results successfully sent
[05:26:13] Thank you for your contribution to Folding@Home.
[05:26:13] + Sent 1 of 1 completed units to the server
[05:26:13] + Closed connections