Project: 6502 (Run 10, Clone 351, Gen 82)
Posted: Sat Oct 23, 2010 12:52 pm
Just reporting for the record. WU failed at time 11:51:33. New WU picked up was the same. Hope this one runs to completion.
Code: Select all
[05:06:53] - Preparing to get new work unit...
[05:06:53] + Attempting to get work packet
[05:06:53] - Will indicate memory of 1001 MB
[05:06:53] - Detect CPU. Vendor: AuthenticAMD, Family: 6, Model: 8, Stepping: 1
[05:06:53] - Connecting to assignment server
[05:06:53] Connecting to http://assign.stanford.edu:8080/
[05:06:54] Posted data.
[05:06:54] Initial: 40AB; - Successful: assigned to (171.64.65.62).
[05:06:54] + News From Folding@Home: Welcome to Folding@Home
[05:06:54] Loaded queue successfully.
[05:06:54] Connecting to http://171.64.65.62:8080/
[05:06:55] Posted data.
[05:06:56] Initial: 0000; - Receiving payload (expected size: 422371)
[05:07:04] - Downloaded at ~51 kB/s
[05:07:04] - Averaged speed for that direction ~49 kB/s
[05:07:04] + Received work.
[05:07:04] Trying to send all finished work units
[05:07:04] + No unsent completed units remaining.
[05:07:04] + Closed connections
[05:07:04]
[05:07:04] + Processing work unit
[05:07:04] Core required: FahCore_78.exe
[05:07:04] Core found.
[05:07:04] Working on Unit 02 [October 23 05:07:04]
[05:07:04] + Working ...
[05:07:04] - Calling './FahCore_78.exe -dir work/ -suffix 02 -checkpoint 15 -verbose -lifeline 1695 -version 602'
[05:07:04]
[05:07:04] *------------------------------*
[05:07:04] Folding@Home Gromacs Core
[05:07:04] Version 1.90 (March 8, 2006)
[05:07:04]
[05:07:04] Preparing to commence simulation
[05:07:04] - Looking at optimizations...
[05:07:04] - Created dyn
[05:07:04] - Files status OK
[05:07:04] - Expanded 421859 -> 2026461 (decompressed 480.3 percent)
[05:07:04] - Starting from initial work packet
[05:07:04]
[05:07:04] Project: 6502 (Run 10, Clone 351, Gen 82)
[05:07:04]
[05:07:04] Assembly optimizations on if available.
[05:07:04] Entering M.D.
Gromacs is Copyright (c) 1991-2003, University of Groningen, The Netherlands
This inclusion of Gromacs code in the Folding@Home Core is under
a special license (see http://folding.stanford.edu/gromacs.html)
specially granted to Stanford by the copyright holders. If you
are interested in using Gromacs, visit www.gromacs.org where
you can download a free version of Gromacs under
the terms of the GNU General Public License (GPL) as published
by the Free Software Foundation; either version 2 of the License,
or (at your option) any later version.
[05:07:10] Protein: TR462_A_11 in water
[05:07:10]
[05:07:10] Writing local files
[05:07:10] Extra SSE boost OK.
[05:07:11] Writing local files
[05:07:11] Completed 0 out of 250000 steps (0%)
[05:16:50] Writing local files
[05:16:50] Completed 2500 out of 250000 steps (1%)
[05:26:30] Writing local files
[05:26:30] Completed 5000 out of 250000 steps (2%)
[05:36:09] Writing local files
[05:36:09] Completed 7500 out of 250000 steps (3%)
[05:45:49] Writing local files
[05:45:49] Completed 10000 out of 250000 steps (4%)
[05:55:28] Writing local files
[05:55:28] Completed 12500 out of 250000 steps (5%)
[06:05:07] Writing local files
[06:05:07] Completed 15000 out of 250000 steps (6%)
[06:14:47] Writing local files
[06:14:47] Completed 17500 out of 250000 steps (7%)
[06:24:27] Writing local files
[06:24:27] Completed 20000 out of 250000 steps (8%)
[06:34:07] Writing local files
[06:34:07] Completed 22500 out of 250000 steps (9%)
[06:43:46] Writing local files
[06:43:46] Completed 25000 out of 250000 steps (10%)
[06:53:27] Writing local files
[06:53:27] Completed 27500 out of 250000 steps (11%)
[07:03:06] Writing local files
[07:03:06] Completed 30000 out of 250000 steps (12%)
[07:12:46] Writing local files
[07:12:46] Completed 32500 out of 250000 steps (13%)
[07:22:27] Writing local files
[07:22:27] Completed 35000 out of 250000 steps (14%)
[07:32:07] Writing local files
[07:32:07] Completed 37500 out of 250000 steps (15%)
[07:41:48] Writing local files
[07:41:48] Completed 40000 out of 250000 steps (16%)
[07:51:29] Writing local files
[07:51:29] Completed 42500 out of 250000 steps (17%)
[08:01:09] Writing local files
[08:01:09] Completed 45000 out of 250000 steps (18%)
[08:10:49] Writing local files
[08:10:49] Completed 47500 out of 250000 steps (19%)
[08:20:29] Writing local files
[08:20:29] Completed 50000 out of 250000 steps (20%)
[08:30:11] Writing local files
[08:30:11] Completed 52500 out of 250000 steps (21%)
[08:39:51] Writing local files
[08:39:51] Completed 55000 out of 250000 steps (22%)
[08:49:30] Writing local files
[08:49:30] Completed 57500 out of 250000 steps (23%)
[08:59:10] Writing local files
[08:59:10] Completed 60000 out of 250000 steps (24%)
[09:08:50] Writing local files
[09:08:50] Completed 62500 out of 250000 steps (25%)
[09:18:29] Writing local files
[09:18:29] Completed 65000 out of 250000 steps (26%)
[09:28:08] Writing local files
[09:28:08] Completed 67500 out of 250000 steps (27%)
[09:37:48] Writing local files
[09:37:48] Completed 70000 out of 250000 steps (28%)
[09:47:28] Writing local files
[09:47:29] Completed 72500 out of 250000 steps (29%)
[09:57:07] Writing local files
[09:57:07] Completed 75000 out of 250000 steps (30%)
[10:06:47] Writing local files
[10:06:47] Completed 77500 out of 250000 steps (31%)
[10:16:26] Writing local files
[10:16:26] Completed 80000 out of 250000 steps (32%)
[10:26:05] Writing local files
[10:26:05] Completed 82500 out of 250000 steps (33%)
[10:35:44] Writing local files
[10:35:44] Completed 85000 out of 250000 steps (34%)
[10:45:23] Writing local files
[10:45:23] Completed 87500 out of 250000 steps (35%)
[10:47:40] - Autosending finished units...
[10:47:40] Trying to send all finished work units
[10:47:40] + No unsent completed units remaining.
[10:47:40] - Autosend completed
[10:55:01] Writing local files
[10:55:01] Completed 90000 out of 250000 steps (36%)
[11:04:39] Writing local files
[11:04:39] Completed 92500 out of 250000 steps (37%)
[11:14:16] Writing local files
[11:14:16] Completed 95000 out of 250000 steps (38%)
[11:23:54] Writing local files
[11:23:54] Completed 97500 out of 250000 steps (39%)
[11:33:32] Writing local files
[11:33:32] Completed 100000 out of 250000 steps (40%)
[11:43:11] Writing local files
[11:43:11] Completed 102500 out of 250000 steps (41%)
[11:51:33] CoreStatus = 0 (0)
[11:51:33] Client-core communications error: ERROR 0x0
[11:51:33] Deleting current work unit & continuing...
[11:51:58] Trying to send all finished work units
[11:51:58] + No unsent completed units remaining.
[11:51:58] - Preparing to get new work unit...
[11:51:58] + Attempting to get work packet
[11:51:58] - Will indicate memory of 1001 MB
[11:51:58] - Connecting to assignment server
[11:51:58] Connecting to http://assign.stanford.edu:8080/
[11:52:00] Posted data.
[11:52:00] Initial: 40AB; - Successful: assigned to (171.64.65.62).
[11:52:00] + News From Folding@Home: Welcome to Folding@Home
[11:52:00] Loaded queue successfully.
[11:52:00] Connecting to http://171.64.65.62:8080/
[11:52:02] Posted data.
[11:52:02] Initial: 0000; - Receiving payload (expected size: 422371)
[11:52:13] - Downloaded at ~37 kB/s
[11:52:13] - Averaged speed for that direction ~47 kB/s
[11:52:13] + Received work.
[11:52:13] + Closed connections
[11:52:18]
[11:52:18] + Processing work unit
[11:52:18] Core required: FahCore_78.exe
[11:52:18] Core found.
[11:52:18] Working on Unit 03 [October 23 11:52:18]
[11:52:18] + Working ...
[11:52:18] - Calling './FahCore_78.exe -dir work/ -suffix 03 -checkpoint 15 -verbose -lifeline 1695 -version 602'
[11:52:18]
[11:52:18] *------------------------------*
[11:52:18] Folding@Home Gromacs Core
[11:52:18] Version 1.90 (March 8, 2006)
[11:52:18]
[11:52:18] Preparing to commence simulation
[11:52:18] - Looking at optimizations...
[11:52:18] - Created dyn
[11:52:18] - Files status OK
[11:52:18] - Expanded 421859 -> 2026461 (decompressed 480.3 percent)
[11:52:18] - Starting from initial work packet
[11:52:18]
[11:52:18] Project: 6502 (Run 10, Clone 351, Gen 82)
[11:52:18]
[11:52:18] Assembly optimizations on if available.
[11:52:18] Entering M.D.
Gromacs is Copyright (c) 1991-2003, University of Groningen, The Netherlands
This inclusion of Gromacs code in the Folding@Home Core is under
a special license (see http://folding.stanford.edu/gromacs.html)
specially granted to Stanford by the copyright holders. If you
are interested in using Gromacs, visit www.gromacs.org where
you can download a free version of Gromacs under
the terms of the GNU General Public License (GPL) as published
by the Free Software Foundation; either version 2 of the License,
or (at your option) any later version.
[11:52:24] Protein: TR462_A_11 in water
[11:52:24]
[11:52:24] Writing local files
[11:52:25] Extra SSE boost OK.
[11:52:25] Writing local files
[11:52:25] Completed 0 out of 250000 steps (0%)
[12:02:04] Writing local files
[12:02:04] Completed 2500 out of 250000 steps (1%)
[12:11:44] Writing local files
[12:11:44] Completed 5000 out of 250000 steps (2%)
[12:21:23] Writing local files
[12:21:23] Completed 7500 out of 250000 steps (3%)
[12:31:03] Writing local files
[12:31:03] Completed 10000 out of 250000 steps (4%)
[12:40:42] Writing local files
[12:40:42] Completed 12500 out of 250000 steps (5%)