Page 1 of 1
Project: 6012 (Run 2, Clone 241, Gen 189) Unit crashed?
Posted: Mon Sep 06, 2010 1:51 pm
by adilms
The project crashed on me twice. Not sure why. Usually, 500,000 step work units finish in 8 hours or so.
Here is the logfile right after the last successful unit:
Code: Select all
[21:42:58] + Results successfully sent
[21:42:58] Thank you for your contribution to Folding@Home.
[21:42:58] + Number of Units Completed: 16
[21:43:02] Trying to send all finished work units
[21:43:02] + No unsent completed units remaining.
[21:43:02] - Preparing to get new work unit...
[21:43:02] Cleaning up work directory
[21:43:02] + Attempting to get work packet
[21:43:02] Passkey found
[21:43:02] - Will indicate memory of 3654 MB
[21:43:02] - Connecting to assignment server
[21:43:02] Connecting to http://assign.stanford.edu:8080/
[21:43:03] Posted data.
[21:43:03] Initial: ED82; - Successful: assigned to (130.237.232.140).
[21:43:03] + News From Folding@Home: Welcome to Folding@Home
[21:43:03] Loaded queue successfully.
[21:43:03] Sent data
[21:43:03] Connecting to http://130.237.232.140:8080/
[21:43:04] Posted data.
[21:43:04] Initial: 0000; - Receiving payload (expected size: 1796987)
[21:43:14] - Downloaded at ~175 kB/s
[21:43:14] - Averaged speed for that direction ~611 kB/s
[21:43:14] + Received work.
[21:43:14] Trying to send all finished work units
[21:43:14] + No unsent completed units remaining.
[21:43:14] + Closed connections
[21:43:14]
[21:43:14] + Processing work unit
[21:43:14] Core required: FahCore_a3.exe
[21:43:14] Core found.
[21:43:14] Working on queue slot 07 [September 4 21:43:14 UTC]
[21:43:14] + Working ...
[21:43:14] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 07 -np 6 -checkpoint 15 -verbose -lifeline 8 -version 630'
[21:43:14]
[21:43:14] *------------------------------*
[21:43:14] Folding@Home Gromacs SMP Core
[21:43:14] Version 2.22 (Mar 12, 2010)
[21:43:14]
[21:43:14] Preparing to commence simulation
[21:43:14] - Looking at optimizations...
[21:43:14] - Created dyn
[21:43:14] - Files status OK
[21:43:15] - Expanded 1796475 -> 2078149 (decompressed 115.6 percent)
[21:43:15] Called DecompressByteArray: compressed_data_size=1796475 data_size=2078149, decompressed_data_size=2078149 diff=0
[21:43:15] - Digital signature verified
[21:43:15]
[21:43:15] Project: 6012 (Run 2, Clone 241, Gen 189)
[21:43:15]
[21:43:15] Assembly optimizations on if available.
[21:43:15] Entering M.D.
[21:43:21] Completed 0 out of 500000 steps (0%)
[21:48:17] Completed 5000 out of 500000 steps (1%)
.
.
.
[02:18:13] Completed 280000 out of 500000 steps (56%)
[02:23:07] Completed 285000 out of 500000 steps (57%)
[02:39:49] - Autosending finished units... [September 5 02:39:49 UTC]
[02:39:49] Trying to send all finished work units
[02:39:49] + No unsent completed units remaining.
[02:39:49] - Autosend completed
[08:39:49] - Autosending finished units... [September 5 08:39:49 UTC]
[08:39:49] Trying to send all finished work units
[08:39:49] + No unsent completed units remaining.
[08:39:49] - Autosend completed
[14:39:49] - Autosending finished units... [September 5 14:39:49 UTC]
[14:39:49] Trying to send all finished work units
[14:39:49] + No unsent completed units remaining.
[14:39:49] - Autosend completed
[20:39:49] - Autosending finished units... [September 5 20:39:49 UTC]
[20:39:49] Trying to send all finished work units
[20:39:49] + No unsent completed units remaining.
[20:39:49] - Autosend completed
[02:39:49] - Autosending finished units... [September 6 02:39:49 UTC]
[02:39:49] Trying to send all finished work units
[02:39:49] + No unsent completed units remaining.
[02:39:49] - Autosend completed
It crashed. Then I restarted. And here's the log for till it crashed again:
Code: Select all
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.30
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\users\adilms\FAH
Executable: C:\users\adilms\FAH\fah.exe
Arguments: -smp -verbosity 9
[04:28:31] - Ask before connecting: No
[04:28:31] - User name: adilms (Team 182636)
[04:28:31] - User ID: 5***5
[04:28:31] - Machine ID: 1
[04:28:31]
[04:28:32] Loaded queue successfully.
[04:28:32] [0[04:28:32] + Processing work unit
[04:28:32] Core required: FahCore_a3.exe
[04:28:32] + No unsent completed units remaining.
[04:28:32] - Autosend completed[04:28:32] Core found.
[04:28:32] Working on queue slot 07 [September 6 04:28:32 UTC]
[04:28:32] + Working ...
[04:28:32] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 07 -np 6 -checkpoint 15 -verbose -lifeline 8 -version 630'
[04:28:32]
[04:28:32] *------------------------------*
[04:28:32] Folding@Home Gromacs SMP Core
[04:28:32] Version 2.22 (Mar 12, 2010)
[04:28:32]
[04:28:32] Preparing to commence simulation
[04:28:32] - Looking at optimizations...
[04:28:32] - Files status OK
[04:28:32] - Expanded 1796475 -> 2078149 (decompressed 115.6 percent)
[04:28:32] Called DecompressByteArray: compressed_data_size=1796475 data_size=2078149, decompressed_data_size=2078149 diff=0
[04:28:32] - Digital signature verified
[04:28:32]
[04:28:32] Project: 6012 (Run 2, Clone 241, Gen 189)
[04:28:32]
[04:28:32] Assembly optimizations on if available.
[04:28:32] Entering M.D.
[04:28:38] Using Gromacs checkpoints
[04:28:39] Resuming from checkpoint
[04:28:39] Verified work/wudata_07.log
[04:28:39] Verified work/wudata_07.trr
[04:28:39] Verified work/wudata_07.edr
[04:28:39] Completed 275042 out of 500000 steps (55%)
.
.
.
[06:58:32] Completed 440000 out of 500000 steps (88%)
[10:28:32] - Autosending finished units... [September 6 10:28:32 UTC]
[10:28:32] Trying to send all finished work units
[10:28:32] + No unsent completed units remaining.
[10:28:32] - Autosend completed
I restarted it again now. The other units finished fine.
-adilms
Re: Project: 6012 (Run 2, Clone 241, Gen 189) Unit crashed?
Posted: Tue Sep 07, 2010 1:35 am
by adilms
It crashed with another work unit (6056). I didn't notice the wine errors don't show up in the fahlog file. I'll try to find the right place to post the error.
Code: Select all
[14:30:19] DynamicWrapper: Finished Work Unit: sleep=10000
[14:30:29]
[14:30:29] Finished Work Unit:
[14:30:29] - Reading up to 20446800 from "work/wudata_07.trr": Read 20446800
[14:30:29] trr file hash check passed.
[14:30:29] edr file hash check passed.
[14:30:29] logfile size: 57308
[14:30:29] Leaving Run
[14:30:30] - Writing 20538384 bytes of core data to disk...
[14:30:31] ... Done.
[14:30:31] - Shutting down core
[14:30:31]
[14:30:31] Folding@home Core Shutdown: FINISHED_UNIT
[14:30:35] CoreStatus = 64 (100)
[14:30:35] Unit 7 finished with 72 percent of time to deadline remaining.
[14:30:35] Updated performance fraction: 0.898323
[14:30:35] Sending work to server
[14:30:35] Project: 6012 (Run 2, Clone 241, Gen 189)
[14:30:35] + Attempting to send results [September 6 14:30:35 UTC]
[14:30:35] - Reading file work/wuresults_07.dat from core
[14:30:35] (Read 20538384 bytes from disk)
[14:30:35] Connecting to http://130.237.232.140:8080/
[14:31:54] Posted data.
[14:31:54] Initial: 0000; - Uploaded at ~253 kB/s
[14:31:54] - Averaged speed for that direction ~240 kB/s
[14:31:54] + Results successfully sent
[14:31:54] Thank you for your contribution to Folding@Home.
[14:31:54] + Number of Units Completed: 17
Warning: Ignoring unknown arg
Warning: Ignoring unknown arg
[14:31:58] Trying to send all finished work units
[14:31:58] + No unsent completed units remaining.
[14:31:58] - Preparing to get new work unit...
[14:31:58] Cleaning up work directory
[14:31:58] + Attempting to get work packet
[14:31:58] Passkey found
[14:31:58] - Will indicate memory of 3654 MB
[14:31:58] - Detect CPU. Vendor: AuthenticAMD, Family: 15, Model: 10, Stepping: 0
[14:31:58] - Connecting to assignment server
[14:31:58] Connecting to http://assign.stanford.edu:8080/
[14:31:58] Posted data.
[14:31:58] Initial: ED82; - Successful: assigned to (130.237.232.140).
[14:31:58] + News From Folding@Home: Welcome to Folding@Home
[14:31:59] Loaded queue successfully.
[14:31:59] Sent data
[14:31:59] Connecting to http://130.237.232.140:8080/
[14:31:59] Posted data.
[14:31:59] Initial: 0000; + Could not connect to Work Server
[14:31:59] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[14:32:11] + Attempting to get work packet
[14:32:11] Passkey found
[14:32:11] - Will indicate memory of 3654 MB
[14:32:11] - Connecting to assignment server
[14:32:11] Connecting to http://assign.stanford.edu:8080/
[14:32:12] Posted data.
[14:32:12] Initial: ED82; - Successful: assigned to (130.237.232.140).
[14:32:12] + News From Folding@Home: Welcome to Folding@Home
[14:32:12] Loaded queue successfully.
[14:32:12] Sent data
[14:32:12] Connecting to http://130.237.232.140:8080/
[14:32:12] Posted data.
[14:32:12] Initial: 0000; + Could not connect to Work Server
[14:32:12] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[14:32:29] + Attempting to get work packet
[14:32:29] Passkey found
[14:32:29] - Will indicate memory of 3654 MB
[14:32:29] - Connecting to assignment server
[14:32:29] Connecting to http://assign.stanford.edu:8080/
[14:32:30] Posted data.
[14:32:30] Initial: ED82; - Successful: assigned to (130.237.232.140).
[14:32:30] + News From Folding@Home: Welcome to Folding@Home
[14:32:30] Loaded queue successfully.
[14:32:30] Sent data
[14:32:30] Connecting to http://130.237.232.140:8080/
[14:32:31] Posted data.
[14:32:31] Initial: 0000; + Could not connect to Work Server
[14:32:31] - Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[14:32:59] + Attempting to get work packet
[14:32:59] Passkey found
[14:32:59] - Will indicate memory of 3654 MB
[14:32:59] - Connecting to assignment server
[14:32:59] Connecting to http://assign.stanford.edu:8080/
[14:33:00] Posted data.
[14:33:00] Initial: ED82; - Successful: assigned to (130.237.232.140).
[14:33:00] + News From Folding@Home: Welcome to Folding@Home
[14:33:00] Loaded queue successfully.
[14:33:00] Sent data
[14:33:00] Connecting to http://130.237.232.140:8080/
[14:33:00] Posted data.
[14:33:01] Initial: 0000; + Could not connect to Work Server
[14:33:01] - Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[14:33:52] + Attempting to get work packet
[14:33:52] Passkey found
[14:33:52] - Will indicate memory of 3654 MB
[14:33:52] - Connecting to assignment server
[14:33:52] Connecting to http://assign.stanford.edu:8080/
[14:33:53] Posted data.
[14:33:53] Initial: ED82; - Successful: assigned to (130.237.232.140).
[14:33:53] + News From Folding@Home: Welcome to Folding@Home
[14:33:53] Loaded queue successfully.
[14:33:53] Sent data
[14:33:53] Connecting to http://130.237.232.140:8080/
[14:33:53] Posted data.
[14:33:53] Initial: 0000; + Could not connect to Work Server
[14:33:53] - Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
[14:35:26] + Attempting to get work packet
[14:35:26] Passkey found
[14:35:26] - Will indicate memory of 3654 MB
[14:35:26] - Connecting to assignment server
[14:35:26] Connecting to http://assign.stanford.edu:8080/
[14:35:27] Posted data.
[14:35:27] Initial: 40AB; - Successful: assigned to (171.64.65.54).
[14:35:27] + News From Folding@Home: Welcome to Folding@Home
[14:35:27] Loaded queue successfully.
[14:35:27] Sent data
[14:35:27] Connecting to http://171.64.65.54:8080/
[14:35:28] Posted data.
[14:35:28] Initial: 0000; - Receiving payload (expected size: 1771979)
[14:35:31] - Downloaded at ~576 kB/s
[14:35:31] - Averaged speed for that direction ~604 kB/s
[14:35:31] + Received work.
[14:35:32] Trying to send all finished work units
[14:35:32] + No unsent completed units remaining.
[14:35:32] + Closed connections
[14:35:32]
[14:35:32] + Processing work unit
[14:35:32] Core required: FahCore_a3.exe
[14:35:32] Core found.
[14:35:32] Working on queue slot 08 [September 6 14:35:32 UTC]
[14:35:32] + Working ...
[14:35:32] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 08 -np 6 -checkpoint 15 -verbose -lifeline 8 -version 630'
Warning: Ignoring unknown arg
Warning: Ignoring unknown arg
[14:35:32]
[14:35:32] *------------------------------*
[14:35:32] Folding@Home Gromacs SMP Core
[14:35:32] Version 2.22 (Mar 12, 2010)
[14:35:32]
[14:35:32] Preparing to commence simulation
[14:35:32] - Looking at optimizations...
[14:35:32] - Created dyn
[14:35:32] - Files status OK
[14:35:32] - Expanded 1771467 -> 1975105 (decompressed 111.4 percent)
[14:35:32] Called DecompressByteArray: compressed_data_size=1771467 data_size=1975105, decompressed_data_size=1975105 diff=0
[14:35:32] - Digital signature verified
[14:35:32]
[14:35:32] Project: 6021 (Run 0, Clone 38, Gen 297)
[14:35:32]
[14:35:32] Assembly optimizations on if available.
[14:35:32] Entering M.D.
Reading file work/wudata_08.tpr, VERSION 4.0.99_development_20090605 (single precision)
Note: tpx file_version 68, software version 70
Starting 6 threads
Making 1D domain decomposition 6 x 1 x 1
starting mdrun 'Protein in POPC'
149000016 steps, 298000.0 ps (continuing from step 148500016, 297000.0 ps).
[14:35:39] Completed 0 out of 500000 steps (0%)
[14:40:12] Completed 5000 out of 500000 steps (1%)
[22:21:34] Completed 500000 out of 500000 steps (100%)
fixme:file:MoveFileWithProgressW MOVEFILE_WRITE_THROUGH unimplemented
fixme:file:MoveFileWithProgressW MOVEFILE_WRITE_THROUGH unimplemented
Writing final coordinates.
Average load imbalance: 8.3 %
Part of the total run time spent waiting due to load imbalance: 4.1 %
Parallel run - timing based on wallclock.
NODE (s) Real (s) (%)
Time: 27957.000 27957.000 100.0
7h45:57
(Mnbf/s) (GFlops) (ns/day) (hour/ns)
Performance: 217.319 13.836 3.090 7.766
Thanx for Using GROMACS - Have a Nice Day
[22:21:35] DynamicWrapper: Finished Work Unit: sleep=10000
[22:21:45]
[22:21:45] Finished Work Unit:
[22:21:45] - Reading up to 20342520 from "work/wudata_08.trr": Read 20342520
[22:21:45] trr file hash check passed.
[22:21:45] edr file hash check passed.
[22:21:45] logfile size: 56041
[22:21:45] Leaving Run
[22:21:50] - Writing 20432837 bytes of core data to disk...
[22:21:50] ... Done.
[22:21:50] - Shutting down core
[22:21:50]
[22:21:50] Folding@home Core Shutdown: FINISHED_UNIT
[22:21:54] CoreStatus = 64 (100)
[22:21:54] Unit 8 finished with 95 percent of time to deadline remaining.
[22:21:54] Updated performance fraction: 0.907863
[22:21:54] Sending work to server
[22:21:54] Project: 6021 (Run 0, Clone 38, Gen 297)
[22:21:54] + Attempting to send results [September 6 22:21:54 UTC]
[22:21:54] - Reading file work/wuresults_08.dat from core
[22:21:54] (Read 20432837 bytes from disk)
[22:21:54] Connecting to http://171.64.65.54:8080/
[22:23:16] Posted data.
[22:23:16] Initial: 0000; - Uploaded at ~240 kB/s
[22:23:17] - Averaged speed for that direction ~240 kB/s
[22:23:17] + Results successfully sent
[22:23:17] Thank you for your contribution to Folding@Home.
[22:23:17] + Number of Units Completed: 18
Warning: Ignoring unknown arg
Warning: Ignoring unknown arg
[22:23:21] Trying to send all finished work units
[22:23:21] + No unsent completed units remaining.
[22:23:21] - Preparing to get new work unit...
[22:23:21] Cleaning up work directory
[22:23:21] + Attempting to get work packet
[22:23:21] Passkey found
[22:23:21] - Will indicate memory of 3654 MB
[22:23:21] - Connecting to assignment server
[22:23:21] Connecting to http://assign.stanford.edu:8080/
[22:23:21] Posted data.
[22:23:21] Initial: 40AB; - Successful: assigned to (171.64.65.54).
[22:23:21] + News From Folding@Home: Welcome to Folding@Home
[22:23:22] Loaded queue successfully.
[22:23:22] Sent data
[22:23:22] Connecting to http://171.64.65.54:8080/
[22:23:22] Posted data.
[22:23:22] Initial: 0000; - Receiving payload (expected size: 1768649)
[22:23:25] - Downloaded at ~575 kB/s
[22:23:25] - Averaged speed for that direction ~599 kB/s
[22:23:25] + Received work.
[22:23:25] Trying to send all finished work units
[22:23:25] + No unsent completed units remaining.
[22:23:25] + Closed connections
[22:23:25]
[22:23:25] + Processing work unit
[22:23:25] Core required: FahCore_a3.exe
[22:23:25] Core found.
[22:23:25] Working on queue slot 09 [September 6 22:23:25 UTC]
[22:23:25] + Working ...
[22:23:25] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 09 -np 6 -checkpoint 15 -verbose -lifeline 8 -version 630'
Warning: Ignoring unknown arg
Warning: Ignoring unknown arg
[22:23:25]
[22:23:25] *------------------------------*
[22:23:25] Folding@Home Gromacs SMP Core
[22:23:25] Version 2.22 (Mar 12, 2010)
[22:23:25]
[22:23:25] Preparing to commence simulation
[22:23:25] - Looking at optimizations...
[22:23:25] - Created dyn
[22:23:25] - Files status OK
[22:23:26] - Expanded 1768137 -> 2253305 (decompressed 127.4 percent)
[22:23:26] Called DecompressByteArray: compressed_data_size=1768137 data_size=2253305, decompressed_data_size=2253305 diff=0
[22:23:26] - Digital signature verified
[22:23:26]
[22:23:26] Project: 6056 (Run 0, Clone 91, Gen 50)
[22:23:26]
[22:23:26] Assembly optimizations on if available.
[22:23:26] Entering M.D.
Reading file work/wudata_09.tpr, VERSION 4.0.99_development_20090605 (single precision)
Starting 6 threads
Making 1D domain decomposition 6 x 1 x 1
starting mdrun 'Mutant_scan'
25500002 steps, 51000.0 ps (continuing from step 25000002, 50000.0 ps).
[22:23:32] Completed 0 out of 500000 steps (0%)
[22:28:01] Completed 5000 out of 500000 steps (1%)
[22:32:31] Completed 10000 out of 500000 steps (2%)
[22:37:00] Completed 15000 out of 500000 steps (3%)
fixme:file:MoveFileWithProgressW MOVEFILE_WRITE_THROUGH unimplemented
.
.
.
[01:20:16] Completed 195000 out of 500000 steps (39%)
fixme:file:MoveFileWithProgressW MOVEFILE_WRITE_THROUGH unimplemented
fixme:file:MoveFileWithProgressW MOVEFILE_WRITE_THROUGH unimplemented
[01:24:43] Completed 200000 out of 500000 steps (40%)
wine: Unhandled page fault on read access to 0x0ff3e944 at address 0x609c32 (thread 0039), starting debugger...
Unhandled exception: page fault on read access to 0x0ff3e944 in 32-bit code (0x00609c32).
Register dump:
CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
EIP:00609c32 ESP:0192d260 EBP:0192d890 EFLAGS:00010202( R- -- I - - - )
EAX:0300c4d7 EBX:0000c4e0 ECX:0000c738 EDX:0000c753
ESI:03f0d5e8 EDI:03f97948
Stack dump:
0x0192d260: 4073640a 4073640a 4073640a 4073640a
0x0192d270: 414617ad 414617ad 414617ad 414617ad
0x0192d280: 40da57f6 40da57f6 40da57f6 40da57f6
0x0192d290: 4074bcef 4074bcef 4074bcef 4074bcef
0x0192d2a0: 414680bb 414680bb 414680bb 414680bb
0x0192d2b0: 40dd377b 40dd377b 40dd377b 40dd377b
Backtrace:
=>0 0x00609c32 in fahcore_a3 (+0x209c32) (0x0192d890)
0x00609c32: ???
Modules:
Module Address Debug info Name (25 modules)
PE 400000- cfd000 Export fahcore_a3
ELF 7b800000-7b973000 Deferred kernel32<elf>
\-PE 7b810000-7b973000 \ kernel32
ELF 7bc00000-7bcb9000 Deferred ntdll<elf>
\-PE 7bc10000-7bcb9000 \ ntdll
ELF 7bf00000-7bf04000 Deferred <wine-loader>
ELF 7ed4a000-7eda5000 Deferred advapi32<elf>
\-PE 7ed60000-7eda5000 \ advapi32
ELF 7eda5000-7edb9000 Deferred libresolv.so.2
ELF 7edb9000-7edda000 Deferred iphlpapi<elf>
\-PE 7edc0000-7edda000 \ iphlpapi
ELF 7edda000-7ee07000 Deferred ws2_32<elf>
\-PE 7ede0000-7ee07000 \ ws2_32
ELF 7ee07000-7ee22000 Deferred wsock32<elf>
\-PE 7ee10000-7ee22000 \ wsock32
ELF 7ee22000-7ee2e000 Deferred libnss_files.so.2
ELF 7ee2e000-7ee45000 Deferred libnsl.so.1
ELF 7ee45000-7ee4d000 Deferred libnss_compat.so.2
ELF 7efc2000-7efe8000 Deferred libm.so.6
ELF 7efed000-7eff7000 Deferred libnss_nis.so.2
ELF f74e1000-f74e5000 Deferred libdl.so.2
ELF f74e5000-f763f000 Deferred libc.so.6
ELF f7640000-f7659000 Deferred libpthread.so.0
ELF f7671000-f77b1000 Deferred libwine.so.1
ELF f77b3000-f77d1000 Deferred ld-linux.so.2
Threads:
process tid prio (all id:s are in hex)
00000008 fah.exe
00000040 0
00000021 0
00000020 0
0000001f 0
00000009 0
0000000e services.exe
00000014 0
00000010 0
0000000f 0
00000011 winedevice.exe
00000018 0
00000017 0
00000013 0
00000012 0
00000019 explorer.exe
0000001a 0
0000003c (D) C:\users\adilms\FAH\FahCore_a3.exe
00000015 -15
00000034 -15
0000001c -15
0000000b -15
00000039 -15 <==
00000035 0
00000043 -15
00000031 0
00000032 0
00000038 -15
Backtrace:
=>0 0x00609c32 in fahcore_a3 (+0x209c32) (0x0192d890)
Re: Project: 6012 (Run 2, Clone 241, Gen 189) Unit crashed?
Posted: Tue Sep 07, 2010 10:50 am
by toTOW
For the last WU you mentioned, WU completed with bonus :
Hi adilms (team 182636),
Your WU (P6056 R0 C91 G50) was added to the stats database on 2010-09-06 23:09:34 for 3013.47 points of credit.
Re: Project: 6012 (Run 2, Clone 241, Gen 189) Unit crashed?
Posted: Wed Sep 08, 2010 1:43 am
by adilms
How to I prevent the crash from reoccurring?
Re: Project: 6012 (Run 2, Clone 241, Gen 189) Unit crashed?
Posted: Wed Sep 08, 2010 11:11 am
by toTOW
Since I don't know anything about this error, I can only suggest to check the system stability ...
Re: Project: 6012 (Run 2, Clone 241, Gen 189) Unit crashed?
Posted: Wed Sep 08, 2010 1:38 pm
by John_Weatherman
Have you tried the
Wine HQ Forum?