Completed, but not submitted WU
Posted: Thu Mar 06, 2008 9:56 am
I noticed this morning that the latest WU on my wife's computer had not been credited. When I looked at the log, I could see it had stopped at 100%, and not submitted itself:
Note: Please read the license agreement (fah6 -license). Further
use of this software requires that you have read and accepted this agreement.
I tried to restart the folding service (this is Linux SMP 6.0, beta 2), but the folding client did not want to run:
At this stage, I decided to try and kill off the rogue process, and all the other FAH processes. Still it would not start
So I decided perhaps the only way to get this WU uploaded was to bounce the machine. But no, it still does not want to submit this WU' s results, which - despite the alarming messages in the log, are still available. So my question is: where do I send them manually, and using which protocol?
FWIW, the unit in question is: Project: 2605 (Run 6, Clone 146, Gen 33)
Thx in advance for yr help.
Mike
Code: Select all
Performance: 23.126 2.874 0.560 42.839
[06:54:08] Completed 500000 out of 500000 steps (100 percent)
[06:54:08] Writing final coordinates.
[06:54:08] Past main M.D. loop
[06:54:08] Will end MPI now
[06:55:08]
[06:55:08] Finished Work Unit:
[06:55:08] - Reading up to 3721200 from "work/wudata_01.arc": Read 3721200
[06:55:08] - Reading up to 1774276 from "work/wudata_01.xtc": Read 1774276
[06:55:08] goefile size: 0
[06:55:08] logfile size: 16927
[06:55:08] Leaving Run
[06:55:08] - Writing 5516803 bytes of core data to disk...
[06:55:08] ... Done.
[06:55:08] - Shutting down core
[06:55:08]
[06:55:08] Folding@home Core Shutdown: FINISHED_UNIT
use of this software requires that you have read and accepted this agreement.
I tried to restart the folding service (this is Linux SMP 6.0, beta 2), but the folding client did not want to run:
Code: Select all
[09:06:16] - Ask before connecting: No
[09:06:16] - User name: Dutchmm (Team 31574)
[09:06:16] - User ID: 627445492C7D9818
[09:06:16] - Machine ID: 1
[09:06:16]
A potential conflict was detected:
Process 7655 is currently running and may also be a client with Mach. ID 1.
Program will now exit. Upon restart, this check will not be done --
you may wish to check that no client is currently running in
/root before restarting.
Please press any key to exit.
Code: Select all
[09:08:02] - Ask before connecting: No
[09:08:02] - User name: Dutchmm (Team 31574)
[09:08:02] - User ID: 627445492C7D9818
[09:08:02] - Machine ID: 1
[09:08:02]
[09:08:03] Loaded queue successfully.
[09:08:03]
[09:08:03] + Processing work unit
[09:08:03] Core required: FahCore_a1.exe
[09:08:03] Core found.
[09:08:03] Working on Unit 01 [March 6 09:08:03]
[09:08:03] + Working ...
[09:08:03]
[09:08:03] *------------------------------*
[09:08:03] Folding@Home Gromacs SMP Core
[09:08:03] Version 1.74 (November 27, 2006)
[09:08:03]
[09:08:03] Preparing to commence simulation
[09:08:03] - Ensuring status. Please wait.
[09:08:03] - Shutting down core
[09:08:20] k packet
[09:08:20]
[09:08:20] Project: 0i(Run 0, Clone 0, Gen 0)
[09:08:20]
[09:08:20] Error: Could not write local file. Exiting.
[09:08:20] ot write local file. Exiting.
[09:08:25] - Shutting down core
[0]0:Return code = 18
[0]1:Return code = 0, signaled with Quit
[0]2:Return code = 0, signaled with Quit
[0]3:Return code = 0, signaled with Quit
[09:10:12] CoreStatus = 12 (18)
[09:10:12] Client-core communications error: ERROR 0x12
[09:10:12] Deleting current work unit & continuing...
[0]0:Return code = 0, signaled with Quit
[0]1:Return code = 18
[0]2:Return code = 0, signaled with Quit
[0]3:Return code = 0, signaled with Quit
[09:14:33] - Preparing to get new work unit...
[09:14:33] + Attempting to get work packet
[09:14:33] - Connecting to assignment server
[09:14:34] - Successful: assigned to (171.64.65.56).
[09:14:34] + News From Folding@Home: Welcome to Folding@Home
[09:14:34] Loaded queue successfully.
[09:14:40] + Closed connections
FWIW, the unit in question is: Project: 2605 (Run 6, Clone 146, Gen 33)
Thx in advance for yr help.
Mike
