Folding Forum

Posted: **Sun Apr 18, 2010 8:52 pm**

I have another occurrence of missing -bigadv credit. It uploaded @aprox. 7:30 am central 4-18-2010.
Is there another server issue?

Posted: **Sun Apr 18, 2010 8:56 pm**

Thanks for the reply.
So i should let the one i have now finish,and i'll get credit for it?

Posted: **Sun Apr 18, 2010 9:02 pm**

Yes, you should get credit for the one that's running now. The RAID in question is looking fairly good for a while.

Posted: **Sun Apr 18, 2010 9:59 pm**

Looks like kasson & team have worked fast on this one, my WU was submitted 18 hours ago and no credit.

I was looking into how to inform the team of the lost unit /credit, but a look at the Stanford Team statistics page which has just now updated with the credit I was missing. Well Done!

Posted: **Mon Apr 19, 2010 2:55 am**

I just got a re credit of the standard 50K today, but I don't know why....... The only work unit I know of that I did not initially get credit for I did get a re credit of back on the 12th of April.

I am at 60% of the current work unit... I think there was a mistake. As you can see in the pic every once in a while I can edge in two -bigadvs in two consecutive days. I do not think I deserve the 50K.

Pic taken from Extreme Folding.

Posted: **Mon Apr 19, 2010 3:23 am**

I also have a phantom bigadv WU for 50806 points credited to me (username is the same as my screen name) and team 111065 sometime today (18 April), before 16:00 but likely after 12:00. All times are PDT and I do not have any clients currently targeting that team.

Posted: **Mon Apr 19, 2010 3:48 am**

The server logs for this last recredit were a bit harder to parse than normal, so we used some more sensitive settings. It may have resulted in a few extra credits...

Posted: **Mon Apr 19, 2010 7:26 am**

I too appear to have been credited with an extra bigadv WU. I haven't been running bigadv for a week but got an extra 50k or so points yesterday.

Posted: **Mon Apr 19, 2010 9:11 am**

I completed a Bigadv WU a couple of days ago after having a nightmare with running Linux from a pen drive, but still haven't been credited.

Code: Select all

--- Opening Log file [April 17 16:26:15 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/senture
Executable: ./fah6
Arguments: -smp 8 -bigadv 

[16:26:15] - Ask before connecting: No
[16:26:15] - User name: Senture (Team 10)
[16:26:15] - User ID: 71F60679301D015C
[16:26:15] - Machine ID: 1
[16:26:15] 
[16:26:15] Loaded queue successfully.
[16:26:15] 
[16:26:15] + Processing work unit
[16:26:15] Core required: FahCore_a2.exe
[16:26:15] Core found.
[16:26:15] Working on queue slot 02 [April 17 16:26:15 UTC]
[16:26:15] + Working ...
[16:26:15] 
[16:26:15] *------------------------------*
[16:26:15] Folding@Home Gromacs SMP Core
[16:26:15] Version 2.10 (Sun Aug 30 03:43:28 CEST 2009)
[16:26:15] 
[16:26:15] Preparing to commence simulation
[16:26:15] - Ensuring status. Please wait.
[16:26:19] Called DecompressByteArray: compressed_data_size=30326824 data_size=159726549, decompressed_data_size=159726549 diff=0
[16:26:19] 9726549, decompressed_data_size=159726549 diff=0
[16:26:20] 3, Clone 19, Gen 88)
[16:26:20] 
[16:26:20] rified
[16:26:20] 
[16:26:20] Project: 2681 (Run 3, Clone 19, Gen 88)
[16:26:20] 
[16:26:23] M.D.
[16:26:23] ing M.D.
[16:26:29] macs checkpoints
[16:26:29] ckpoints
[16:26:32]  M.D.
[16:26:38] Using Gromacs checkpoints
[16:27:01] d work/wudata_02.log
[16:27:02] Verified work/wudata_02.trr
[16:27:02] Verified work/wudata_02.xtc
[16:27:02] Verified work/wudata_02.edr
[16:27:04] Completed 246895 out of 250000 steps  (98%)
[16:35:47] Completed 247500 out of 250000 steps  (99%)
[17:09:13] Completed 250000 out of 250000 steps  (100%)
[17:09:20] DynamicWrapper: Finished Work Unit: sleep=10000
[17:09:30] 
[17:09:30] Finished Work Unit:
[17:09:30] - Reading up to 52713120 from "work/wudata_02.trr": Read 52713120
[17:09:31] trr file hash check passed.
[17:09:31] - Reading up to 47069736 from "work/wudata_02.xtc": Read 47069736
[17:09:31] xtc file hash check passed.
[17:09:31] edr file hash check passed.
[17:09:31] logfile size: 235439
[17:09:31] Leaving Run
[17:09:32] - Writing 100183211 bytes of core data to disk...
[17:09:36]   ... Done.
[18:09:29] - Shutting down core
[18:09:29] 
[18:09:29] Folding@home Core Shutdown: FINISHED_UNIT
[18:14:19] CoreStatus = 64 (100)
[18:14:19] Sending work to server
[18:14:19] Project: 2681 (Run 3, Clone 19, Gen 88)


[18:14:19] + Attempting to send results [April 17 18:14:19 UTC]
[18:14:19] - Couldn't send HTTP request to server
[18:14:19] + Could not connect to Work Server (results)
[18:14:19]     (171.67.108.22:8080)
[18:14:19] + Retrying using alternative port
[18:14:19] - Couldn't send HTTP request to server
[18:14:19] + Could not connect to Work Server (results)
[18:14:19]     (171.67.108.22:80)
[18:14:19] - Error: Could not transmit unit 02 (completed April 17) to work server.
[18:14:19]   Keeping unit 02 in queue.
[18:14:19] Project: 2681 (Run 3, Clone 19, Gen 88)


[18:14:19] + Attempting to send results [April 17 18:14:19 UTC]
[18:14:19] - Couldn't send HTTP request to server
[18:14:19] + Could not connect to Work Server (results)
[18:14:19]     (171.67.108.22:8080)
[18:14:19] + Retrying using alternative port
[18:14:19] - Couldn't send HTTP request to server
[18:14:19] + Could not connect to Work Server (results)
[18:14:19]     (171.67.108.22:80)
[18:14:19] - Error: Could not transmit unit 02 (completed April 17) to work server.


[18:14:19] + Attempting to send results [April 17 18:14:19 UTC]
[18:31:20] - Server does not have record of this unit. Will try again later.
[18:31:20]   Could not transmit unit 02 to Collection server; keeping in queue.
[18:31:20] - Preparing to get new work unit...
[18:31:20] Cleaning up work directory
[18:31:20] + Attempting to get work packet
[18:31:20] Passkey found
[18:31:20] - Connecting to assignment server
[18:31:21] + No appropriate work server was available; will try again in a bit.
[18:31:21] + Couldn't get work instructions.
[18:31:21] - Attempt #1  to get work failed, and no other work to do.
Waiting before retry.
[18:31:33] + Attempting to get work packet
[18:31:33] Passkey found
[18:31:33] - Connecting to assignment server
[18:31:34] + No appropriate work server was available; will try again in a bit.
[18:31:34] + Couldn't get work instructions.
[18:31:34] - Attempt #2  to get work failed, and no other work to do.
Waiting before retry.
[18:31:52] + Attempting to get work packet
[18:31:52] Passkey found
[18:31:52] - Connecting to assignment server
[18:31:52] + No appropriate work server was available; will try again in a bit.
[18:31:52] + Couldn't get work instructions.
[18:31:52] - Attempt #3  to get work failed, and no other work to do.
Waiting before retry.
[18:32:19] + Attempting to get work packet
[18:32:19] Passkey found
[18:32:19] - Connecting to assignment server
[18:32:20] + No appropriate work server was available; will try again in a bit.
[18:32:20] + Couldn't get work instructions.
[18:32:20] - Attempt #4  to get work failed, and no other work to do.
Waiting before retry.
[18:33:13] + Attempting to get work packet
[18:33:13] Passkey found
[18:33:13] - Connecting to assignment server
[18:33:14] + No appropriate work server was available; will try again in a bit.
[18:33:14] + Couldn't get work instructions.
[18:33:14] - Attempt #5  to get work failed, and no other work to do.
Waiting before retry.

Code: Select all

--- Opening Log file [April 17 19:10:13 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/senture
Executable: ./fah6
Arguments: -smp 8 -bigadv 

[19:10:13] - Ask before connecting: No
[19:10:13] - User name: Senture (Team 10)
[19:10:13] - User ID: 71F60679301D015C
[19:10:13] - Machine ID: 1
[19:10:13] 
[19:10:13] Loaded queue successfully.
[19:10:13] 
[19:10:13] Project: 2681 (Run 3, Clone 19, Gen 88)
[19:10:13] + Processing work unit


[19:10:13] Core required: FahCore_a3.exe
[19:10:13] + Attempting to send results [April 17 19:10:13 UTC]
[19:10:13] Core found.
[19:10:13] Working on queue slot 03 [April 17 19:10:13 UTC]
[19:10:13] + Working ...
[19:10:13] 
[19:10:13] *------------------------------*
[19:10:13] Folding@Home Gromacs SMP Core
[19:10:13] Version 2.17 (March 6, 2010)
[19:10:13] 
[19:10:13] Preparing to commence simulation
[19:10:13] - Looking at optimizations...
[19:10:13] - Files status OK
[19:10:13] - Couldn't send HTTP request to server
[19:10:13] + Could not connect to Work Server (results)
[19:10:13]     (171.67.108.22:8080)
[19:10:13] + Retrying using alternative port
[19:10:14] - Couldn't send HTTP request to server
[19:10:14] + Could not connect to Work Server (results)
[19:10:14]     (171.67.108.22:80)
[19:10:14] - Error: Could not transmit unit 02 (completed April 17) to work server.


[19:10:14] + Attempting to send results [April 17 19:10:14 UTC]
[19:10:14] - Expanded 7880790 -> 10126021 (decompressed 128.4 percent)
[19:10:14] Called DecompressByteArray: compressed_data_size=7880790 data_size=10126021, decompressed_data_size=10126021 diff=0
[19:10:14] - Digital signature verified
[19:10:14] 
[19:10:14] Project: 6041 (Run 0, Clone 106, Gen 6)
[19:10:14] 
[19:10:14] Assembly optimizations on if available.
[19:10:14] Entering M.D.
[19:10:20] Using Gromacs checkpoints
[19:10:23] Resuming from checkpoint
[19:10:24] Verified work/wudata_03.log
[19:10:24] Verified work/wudata_03.trr
[19:10:24] Verified work/wudata_03.xtc
[19:10:24] Verified work/wudata_03.edr
[19:10:24] Completed 3732 out of 250000 steps  (1%)
[19:15:29] Completed 5000 out of 250000 steps  (2%)
[19:24:56] Completed 7500 out of 250000 steps  (3%)
[19:26:37] - Server does not have record of this unit. Will try again later.
[19:26:37]   Could not transmit unit 02 to Collection server; keeping in queue.
[19:34:05] Completed 10000 out of 250000 steps  (4%)
[19:44:25] Completed 12500 out of 250000 steps  (5%)
[19:54:16] Completed 15000 out of 250000 steps  (6%)
[20:03:45] Completed 17500 out of 250000 steps  (7%)
[20:12:57] Completed 20000 out of 250000 steps  (8%)
[20:22:08] Completed 22500 out of 250000 steps  (9%)
[20:31:24] Completed 25000 out of 250000 steps  (10%)
[20:40:55] Completed 27500 out of 250000 steps  (11%)
[20:50:07] Completed 30000 out of 250000 steps  (12%)
[20:59:18] Completed 32500 out of 250000 steps  (13%)
[21:05:01] CoreStatus = 8B (139)
[21:05:01] Client-core communications error: ERROR 0x8b
[21:05:01] Deleting current work unit & continuing...
[21:11:22] Project: 2681 (Run 3, Clone 19, Gen 88)


[21:11:22] + Attempting to send results [April 17 21:11:22 UTC]
[21:11:22] - Couldn't send HTTP request to server
[21:11:22] + Could not connect to Work Server (results)
[21:11:22]     (171.67.108.22:8080)
[21:11:22] + Retrying using alternative port
[21:11:22] - Couldn't send HTTP request to server
[21:11:22] + Could not connect to Work Server (results)
[21:11:22]     (171.67.108.22:80)
[21:11:22] - Error: Could not transmit unit 02 (completed April 17) to work server.


[21:11:22] + Attempting to send results [April 17 21:11:22 UTC]

Folding@Home Client Shutdown.

Code: Select all

--- Opening Log file [April 17 21:55:51 UTC] 


# Linux SMP Console Edition ###################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: /home/senture
Executable: ./fah6
Arguments: -smp 8 -bigadv 

[21:55:51] - Ask before connecting: No
[21:55:51] - User name: Senture (Team 10)
[21:55:51] - User ID: 71F60679301D015C
[21:55:51] - Machine ID: 1
[21:55:51] 
[21:55:51] Loaded queue successfully.
[21:55:51] 
[21:55:51] Project: 2681 (Run 3, Clone 19, Gen 88)
[21:55:51] + Processing work unit


[21:55:51] Core required: FahCore_a3.exe
[21:55:51] + Attempting to send results [April 17 21:55:51 UTC]
[21:55:51] Core found.
[21:55:51] Working on queue slot 04 [April 17 21:55:51 UTC]
[21:55:51] + Working ...
[21:55:51] 
[21:55:51] *------------------------------*
[21:55:51] Folding@Home Gromacs SMP Core
[21:55:51] Version 2.17 (March 6, 2010)
[21:55:51] 
[21:55:51] Preparing to commence simulation
[21:55:51] - Looking at optimizations...
[21:55:51] - Files status OK
[21:55:52] - Expanded 4299645 -> 10427873 (decompressed 242.5 percent)
[21:55:52] Called DecompressByteArray: compressed_data_size=4299645 data_size=10427873, decompressed_data_size=10427873 diff=0
[21:55:52] - Digital signature verified
[21:55:52] 
[21:55:52] Project: 6013 (Run 0, Clone 178, Gen 49)
[21:55:52] 
[21:55:52] Assembly optimizations on if available.
[21:55:52] Entering M.D.
[21:55:58] Using Gromacs checkpoints
[21:56:00] Resuming from checkpoint
[21:56:00] Verified work/wudata_04.log
[21:56:00] Verified work/wudata_04.trr
[21:56:00] Verified work/wudata_04.xtc
[21:56:00] Verified work/wudata_04.edr
[21:56:01] Completed 16879 out of 250000 steps  (6%)
[21:56:48] Completed 17500 out of 250000 steps  (7%)
[21:59:21] Completed 20000 out of 250000 steps  (8%)
[22:02:11] Completed 22500 out of 250000 steps  (9%)
[22:04:44] Completed 25000 out of 250000 steps  (10%)
[22:07:21] Completed 27500 out of 250000 steps  (11%)
[22:09:51] Completed 30000 out of 250000 steps  (12%)
[22:12:21] Completed 32500 out of 250000 steps  (13%)
[22:14:51] Completed 35000 out of 250000 steps  (14%)
[22:16:49] + Results successfully sent
[22:16:49] Thank you for your contribution to Folding@Home.
[22:16:49] + Number of Units Completed: 2

I can post the full log file if needed but I've snipped out the relevant information.

Posted: **Mon Apr 19, 2010 6:14 pm**

I have the same problem. Unit completed Saturday and still has not been credited. See Below:

Code: Select all

[09:11:31] Completed 250000 out of 250000 steps  (100%)
[09:11:39] DynamicWrapper: Finished Work Unit: sleep=10000
[09:11:49] 
[09:11:49] Finished Work Unit:
[09:11:49] - Reading up to 52544928 from "work/wudata_00.trr": Read 52544928
[09:11:49] trr file hash check passed.
[09:11:49] - Reading up to 46180512 from "work/wudata_00.xtc": Read 46180512
[09:11:50] xtc file hash check passed.
[09:11:50] edr file hash check passed.
[09:11:50] logfile size: 206442
[09:11:50] Leaving Run
[09:11:50] - Writing 99096798 bytes of core data to disk...
[09:11:55]   ... Done.
[09:12:11] - Shutting down core
[09:12:11] 
[09:12:11] Folding@home Core Shutdown: FINISHED_UNIT
[09:15:14] CoreStatus = 64 (100)
[09:15:14] Unit 0 finished with 59 percent of time to deadline remaining.
[09:15:14] Updated performance fraction: 0.593294
[09:15:14] Sending work to server
[09:15:14] Project: 2683 (Run 10, Clone 1, Gen 53)


[09:15:14] + Attempting to send results [April 17 09:15:14 UTC]
[09:15:14] - Reading file work/wuresults_00.dat from core
[09:15:14]   (Read 99096798 bytes from disk)
[09:15:14] Connecting to http://171.67.108.22:8080/
[09:16:40] Posted data.
[09:16:41] Initial: 0000; - Uploaded at ~217 kB/s
[09:22:39] - Averaged speed for that direction ~459 kB/s
[09:22:39] + Results successfully sent
[09:22:39] Thank you for your contribution to Folding@Home.
[09:22:39] + Number of Units Completed: 59

[09:22:43] - Warning: Could not delete all work unit files (0): Core file absent
[09:22:43] Trying to send all finished work units
[09:22:43] + No unsent completed units remaining.
[09:22:43] - Preparing to get new work unit...

Posted: **Mon Apr 19, 2010 6:39 pm**

Please see post above. We were able to recredit all but ~17 of the returns. The recredits, however, didn't use your passkey, so you'll have to check by username alone.

Posted: **Mon Apr 19, 2010 8:54 pm**

kasson wrote:Please see post above. We were able to recredit all but ~17 of the returns. The recredits, however, didn't use your passkey, so you'll have to check by username alone.

I have and the credit has not shown up. Guess I was one of the ~17.

I hope the one that just completed gets credited since this server is still having issues. Now I cannot get any work to do as reported in the related thread. One would think that the bigadv units might be considered important and valuable and that the servers for these could be kept in decent enough running order that users would not get frustrated and consider just turning them off!!!!

Posted: **Mon Apr 19, 2010 9:29 pm**

MichaelO: I understand your frustration, but things still happen and it takes real time and real people to correct them.

BigAdv is considered very important and very valuable. Although you were apparently one of the unlucky 17, consider the fact that the others got their re-crediting in record time. That process often takes as much as several weeks.

Posted: **Mon Apr 19, 2010 11:04 pm**

Thanks for the update bruce and kasson. Looks like I'm one of the unlucky 17 as I still see no change even though the logs confirmed the client had the passkey present

Posted: **Fri Aug 20, 2010 12:41 am**

I finish and sent WU 9 hours ago, earlier points seen after 20 minutes...

Code: Select all

[17:52:11] - Ask before connecting: No
[17:52:11] - User name: sco01 (Team 47191)
[17:52:11] - User ID: 2FC6D63F58654C3A
[17:52:11] - Machine ID: 2
***
16:29:00] Completed 247500 out of 250000 steps  (99%)
[17:14:56] Completed 250000 out of 250000 steps  (100%)
[17:15:11] DynamicWrapper: Finished Work Unit: sleep=10000
[17:15:21] 
[17:15:21] Finished Work Unit:
[17:15:21] - Reading up to 52629024 from "work/wudata_06.trr": Read 52629024
[17:15:21] trr file hash check passed.
[17:15:21] - Reading up to 47053084 from "work/wudata_06.xtc": Read 47053084
[17:15:22] xtc file hash check passed.
[17:15:22] edr file hash check passed.
[17:15:22] logfile size: 205827
[17:15:22] Leaving Run
[17:15:25] - Writing 100055879 bytes of core data to disk...
[17:15:26]   ... Done.
[17:15:51] - Shutting down core
[17:15:51] 
[17:15:51] Folding@home Core Shutdown: FINISHED_UNIT
[17:16:00] CoreStatus = 64 (100)
[17:16:00] Unit 6 finished with 40 percent of time to deadline remaining.
[17:16:00] Updated performance fraction: 0.497628
[17:16:00] Sending work to server
[17:16:00] Project: 2684 (Run 8, Clone 22, Gen 8)


[17:16:00] + Attempting to send results [August 19 17:16:00 UTC]
[17:16:00] - Reading file work/wuresults_06.dat from core
[17:16:00]   (Read 100055879 bytes from disk)
[17:16:00] Connecting to http://171.67.108.22:8080/
[17:21:36] Posted data.
[17:21:36] Initial: 0000; - Uploaded at ~290 kB/s
[17:21:36] - Averaged speed for that direction ~266 kB/s
[17:21:36] + Results successfully sent
[17:21:36] Thank you for your contribution to Folding@Home.
[17:21:36] + Number of Units Completed: 29

[17:21:43] Trying to send all finished work units
[17:21:43] + No unsent completed units remaining.
[17:21:43] - Preparing to get new work unit...
[17:21:43] Cleaning up work directory
[17:21:43] + Attempting to get work packet
[17:21:43] Passkey found
[17:21:43] - Will indicate memory of 4600 MB
[17:21:43] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 5
[17:21:43] - Connecting to assignment server
[17:21:43] Connecting to http://assign.stanford.edu:8080/
[17:21:45] Posted data.
[17:21:45] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[17:21:45] + News From Folding@Home: Welcome to Folding@Home
[17:21:45] Loaded queue successfully.
[17:21:45] Sent data
[17:21:45] Connecting to http://171.67.108.22:8080/
[17:21:57] Posted data.

Folding Forum

171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?

Re: 171.67.108.22 (bigadv) Missing credits?