Folding Forum

I've finally gotten rid of my 5801's too. I see my returned wu's are way down today so I assume not only my work pc but my home pc was hooped. I cant restart the home pc for a few more hours though.

I'm still partially stuck on the p5801's on both of my graphics cards.

I had to delete the files about 7 times just now before I got a p5506.

ei57 wrote:

Dead Things wrote:Mods - please post notice of when the 5801's have been pulled. All my cores have been shut down by either EUE limit or unstable machine errors, so I'll have to restart them all manually once the coast is clear.

You may try to restart now. I've got 5506 on all mine now, but the 5801's may still come through. At least they seem to assign a mix of WU's.

Thanks - back up and running with a bunch of 5506's!

Cheers!

Add me to the list of those having problems with WU 5801 Run 5 Clone 221 Gen 0.
NANS, EUE limit exceeded, etc.
At first the folding would just disappear. None of the usual "FAH has detected an error..........", just, POOF, gone. I would restart and it would happen again. I deleted the core, restarted and it happened again, Tried deleting the core again and now it doesn't disappear but it won't fold.

toTOW wrote:I wish I had access to the servers ...

Well whoever you have access to..... Thank you....It seems that the message got through.

I spent the time doing my windows updates etc. then when I re-started ....no more 5801's.... Again Thanks to you and the team !!

Jolly-Swagman wrote:there still p5801,s being given out,
Even after Delete Work folder and queue.dat you get em back and EU straight away

So will be shutting down till they have stopped them

Don't give up so quick.
Rinse and repeat...

I'm another one on who's computers p5801 wont fold on.
Apart from this p5801, no other project EUE's on any of my 15 GPU clients.
Time to rinse and repeat all my boxen.

Luck ...............

Having the same issue here, anyone know if taking off the -advmethods flag will disable the 5801s?

Just stop and restart your client, then you will get better wu's. 5801 is off the marked now.

larvi wrote:Having the same issue here, anyone know if taking off the -advmethods flag will disable the 5801s?

I'm getting them without the -advmethods flag set. (Does that flag even have any function with the GPU2 clients?)

-Sid

Sid, it has been my experience that it can take as many as six cycles to get rid of the dastardly p5801 WUs.

You most likely already know the procedure, but just in case:

If you get another p5801, stop the client and delete the following:
Work folder
queue.dat file
unitinfo.txt file.

Rinse and repeat as necessary.

Oh yeah, add much patience.

I had just deleted the work folder - finally it seemed to work. At least for me. Didnt even think to delete the other files.

Flathead74 wrote:Sid, it has been my experience that it can take as many as six cycles to get rid of the dastardly p5801 WUs.

You most likely already know the procedure, but just in case:

If you get another p5801, stop the client and delete the following:
Work folder
queue.dat file
unitinfo.txt file.

Rinse and repeat as necessary.

Oh yeah, add much patience.

Thanks Flathead

Yeah, I've been purging that way here too.

-Sid

PS: 2004 FLSTCI

So it isn't my overclocked 9600 gso causing the instant mdrun returned errors.

At first, I thought it was but a closer inspection of the logs shows every non-guarded run error to be from this project number.

I hope they get it worked out soon. Hopefully, i don't have to rinse and repeat too many times since I have a relatively limited time to fold each day.

Sid wrote:PS: 2004 FLSTCI

Cool 'dat...
1937 74" Flatty (stock) + 1971 Shovel/'57 frame here...