Folding Forum

Community driven support forum for Folding@home
https://foldingforum.org/

Failed to access core package.

https://foldingforum.org/viewtopic.php?t=26786

Page 4 of 4

Re: Failed to access core package.

Posted: Thu Oct 30, 2014 9:47 pm
by davidcoton
From other messages, including the one above from Joe_H, the fix is to delete and re-install the CPU folding slot using FAHControl (Advanced Control)
@Joe -- from logs posted by others it loops endlessly on core-b0 download failure. The WU never starts and therefore never fails.

Re: Failed to access core package.

Posted: Fri Oct 31, 2014 1:50 am
by bruce
davidcoton wrote:The WU never starts and therefore never fails.
Everyone agrees that this does need a permanent fix, even without manual intervention, but I'm not sure your statement is true. I don't remember seeing it happen in V7, but in V6 occasionally the core would report a problem with the WU, re-download the Core, report a problem again, re-download the WU, report a problem again ... and after (i think it was) three tries, move on.

As I said, we need to see the full context.

Re: Failed to access core package.

Posted: Fri Oct 31, 2014 9:29 am
by davidcoton
Sorry, I wrote slightly loosely. In either case it is the FAHClient code that does or should handle the error, but it is still true that if there is no core, the WU is not started. (Except, possibly, for reading its header to determine the core required.) In the end it's a bug, user intervention should not be required, so the precise state of the WU processing is not important ;)

Re: Failed to access core package.

Posted: Fri Oct 31, 2014 1:41 pm
by bruce
Although a WU for core bo should never have been assigned to windows, it did happen. Both problems have apparently been fixed. If anyone encounters another occurrence, let us know.

Re: Failed to access core package.

Posted: Tue Nov 04, 2014 10:54 pm
by Spongebob25
Having the same problem.

Code: Select all

*********************** Log Started 2014-11-04T22:37:20Z ***********************
22:37:20:************************* Folding@home Client *************************
22:37:20:      Website: http://folding.stanford.edu/
22:37:20:    Copyright: (c) 2009-2014 Stanford University
22:37:20:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
22:37:20:         Args: 
22:37:20:       Config: E:/FAH Data/config.xml
22:37:20:******************************** Build ********************************
22:37:20:      Version: 7.4.4
22:37:20:         Date: Mar 4 2014
22:37:20:         Time: 20:26:54
22:37:20:      SVN Rev: 4130
22:37:20:       Branch: fah/trunk/client
22:37:20:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
22:37:20:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
22:37:20:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
22:37:20:     Platform: win32 XP
22:37:20:         Bits: 32
22:37:20:         Mode: Release
22:37:20:******************************* System ********************************
22:37:20:          CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
22:37:20:       CPU ID: GenuineIntel Family 6 Model 58 Stepping 9
22:37:20:         CPUs: 8
22:37:20:       Memory: 15.95GiB
22:37:20:  Free Memory: 13.82GiB
22:37:20:      Threads: WINDOWS_THREADS
22:37:20:   OS Version: 6.1
22:37:20:  Has Battery: false
22:37:20:   On Battery: false
22:37:20:   UTC Offset: -6
22:37:20:          PID: 2568
22:37:20:          CWD: E:/FAH Data
22:37:20:           OS: Windows 7 Professional
22:37:20:      OS Arch: AMD64
22:37:20:         GPUs: 1
22:37:20:        GPU 0: NVIDIA:3 GK104 [GeForce GTX 660 Ti]
22:37:20:         CUDA: 3.0
22:37:20:  CUDA Driver: 6050
22:37:20:Win32 Service: false
22:37:20:***********************************************************************
22:37:20:<config>
22:37:20:  <!-- Network -->
22:37:20:  <proxy v=':8080'/>
22:37:20:
22:37:20:  <!-- Slot Control -->
22:37:20:  <power v='full'/>
22:37:20:
22:37:20:  <!-- User Information -->
22:37:20:  <passkey v='********************************'/>
22:37:20:  <team v='********'/>
22:37:20:  <user v='*************/>
22:37:20:
22:37:20:  <!-- Folding Slots -->
22:37:20:  <slot id='0' type='GPU'>
22:37:20:    <client-type v='beta'/>
22:37:20:    <paused v='true'/>
22:37:20:  </slot>
22:37:20:</config>
22:37:20:Trying to access database...
22:37:21:Successfully acquired database lock
22:37:21:Enabled folding slot 00: PAUSED gpu:0:GK104 [GeForce GTX 660 Ti] (by user)
22:37:21:Set client configured
22:39:20:FS00:Unpaused
22:39:40:ERROR:WU00:FS00:Exception: Could not get IP address for assign-GPU2.stanford.edu: No such host is known. 
22:39:41:Saving configuration to config.xml
22:39:41:<config>
22:39:41:  <!-- Network -->
22:39:41:  <proxy v=':8080'/>
22:39:41:
22:39:41:  <!-- Slot Control -->
22:39:41:  <power v='full'/>
22:39:41:
22:39:41:  <!-- User Information -->
22:39:41:  <passkey v='********************************'/>
22:39:41:  <team v='********'/>
22:39:41:  <user v='*************'/>
22:39:41:
22:39:41:  <!-- Folding Slots -->
22:39:41:  <slot id='0' type='GPU'>
22:39:41:    <client-type v='beta'/>
22:39:41:  </slot>
22:39:41:</config>
22:39:53:ERROR:WU00:FS00:Exception: Could not get IP address for assign-GPU2.stanford.edu: No such host is known. 
22:40:41:WU00:FS00:Connecting to 171.67.108.200:80
22:40:41:WARNING:WU00:FS00:Failed to get ID from '171.67.108.200:80': 10002: Received short response, expected 8 bytes, got 0
22:40:41:WU00:FS00:Connecting to 171.67.108.204:80
22:40:42:WU00:FS00:Connecting to 171.67.108.200:80
22:40:42:WU00:FS00:Assigned to work server 140.163.4.235
22:40:42:WU00:FS00:Requesting new work unit for slot 00: READY gpu:0:GK104 [GeForce GTX 660 Ti] from 140.163.4.235
22:40:42:WU00:FS00:Connecting to 140.163.4.235:8080
22:40:43:WU00:FS00:Downloading 4.19MiB
22:40:45:WU00:FS00:Download complete
22:40:45:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:10471 run:0 clone:25 gen:37 core:0x18 unit:0x00000038538b3dbb53bea7f919a065fd
22:40:45:WU00:FS00:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_18.fah
22:40:45:WU00:FS00:Connecting to web.stanford.edu:80
22:40:47:ERROR:WU00:FS00:Exception: Failed to access core package.
22:41:45:WU00:FS00:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_18.fah
22:41:45:WU00:FS00:Connecting to web.stanford.edu:80
22:41:46:ERROR:WU00:FS00:Exception: Failed to access core package.
22:43:22:WU00:FS00:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_18.fah
22:43:22:WU00:FS00:Connecting to web.stanford.edu:80
22:43:22:ERROR:WU00:FS00:Exception: Failed to access core package.
22:45:59:WU00:FS00:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_18.fah
22:45:59:WU00:FS00:Connecting to web.stanford.edu:80
22:46:01:ERROR:WU00:FS00:Exception: Failed to access core package.
22:50:14:WU00:FS00:Downloading core from http://web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/beta/Core_18.fah
22:50:14:WU00:FS00:Connecting to web.stanford.edu:80
22:50:15:ERROR:WU00:FS00:Exception: Failed to access core package.

Re: Failed to access core package.

Posted: Tue Nov 04, 2014 11:00 pm
by Spongebob25
I deleted the slot and then re added it. It now seems to be folding but now on core 17. Does core 18 not work on 660 Ti?

Re: Failed to access core package.

Posted: Wed Nov 05, 2014 12:23 am
by davidcoton
No support here while you are using the beta flag. Post in Beta forum if you're a beta member, if not either apply to join or remove the beta flag.

Re: Failed to access core package.

Posted: Wed Nov 05, 2014 4:57 pm
by sco01
Spongebob25
http://web.stanford.edu/~pande/Win32/AM ... ore_18.fah
Page not found

working on 660ti, just now you can not download the kernel probably as always bug

Re: Failed to access core package.

Posted: Wed Nov 05, 2014 9:25 pm
by kyleb
Looking into this now

Re: Failed to access core package.

Posted: Wed Nov 05, 2014 9:30 pm
by kyleb
Should be fixed now.

Re: Failed to access core package.

Posted: Wed Nov 05, 2014 10:41 pm
by 7im
kyleb wrote:Should be fixed now.
Just to cover all options, is there a version of this FAHCore that should go here as well?

//web.stanford.edu/~pande/Win32/x86/NVIDIA/Fermi/beta/

Re: Failed to access core package.

Posted: Wed Nov 05, 2014 11:18 pm
by kyleb
Fixed now

Re: Failed to access core package.

Posted: Thu Nov 06, 2014 11:41 am
by Kjetil
Is core 18 still beta?
All times are UTC
Page 4 of 4

Powered by phpBB® Forum Software © phpBB Limited