Folding Forum

Community driven support forum for Folding@home
https://foldingforum.org/

GPU WU issues spreading to CPU WUs

https://foldingforum.org/viewtopic.php?t=25248

Page 4 of 7

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 12:09 am
by LonePalm
I did that. No dice. I still can't see anything with either the WebControl or FAHControl.

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 12:12 am
by LonePalm
Yes, I can see one, and only one, FAHClient. I see two Core wrappers. One FahCore_17.exe and one FahCore_a3.exe

That is, I see these in Windows Task Manager. I can't see anything in either WebControl or FAHControl.

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 3:08 am
by bruce
Disable your firewall and any other security software that might contain one. (You can also disconnect from the internet if you want). Does either Advanced Control or Web Control connect to FAHClient now?

If not, you've messed up the port numbers.

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 3:22 am
by LonePalm
I already did that. But I'll do it again.

Inbound Firewall off
Outbound Firewall off
Anti-virus & Anti-spyware off
email filtering off
Program access control off

And the same results.

All of the above back on. Still the same results.

Port number is set to 36330 in FAHControl. I have no idea what it is set to in the folding. I did not change any of the default settings.

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 3:33 am
by PantherX
What browser are you using? Can you please post the log which should be in (Default location):
%AppData%\FAHClient

This should give us an idea of what F@H settings the FAHClient is using. Please note that if the system is offline (not connected to the internet), Web Control will not function. This is a known issue (https://fah.stanford.edu/projects/FAHClient/ticket/1027). Your only choice is to use Advanced Control (AKA FAHControl) or enter http://127.0.0.1:7396/ into the supported browser.

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 3:59 am
by LonePalm
FireFox 25.0.1 There is nothing wrong with my internet connectivity.

All of this was working correctly yesterday until I had to reboot to get a new GPU WU.

Now FAHControl just says "Connecting" and shows me as team 0, Anonymous. That is not correct.

I just had to reboot to get another GPU WU.

I found the solution in the config file. As soon as I changed the port to 36328 everything started working.

This is NOT a setting that I have changed anywhere. I do not know how the port number got changed from the default in the config file.

Here is the current config file.

Code: Select all

<config>
  <!-- Folding Slot Configuration -->
  <power v='full'/>

  <!-- Network -->
  <proxy v=':8080'/>

  <!-- Remote Command Server -->
  <command-port v='36328'/>

  <!-- User Information -->
  <passkey v='REDACTED'/>
  <team v='36120'/>
  <user v='LonePalm'/>

  <!-- Folding Slots -->
  <slot id='0' type='GPU'/>
  <slot id='1' type='CPU'/>
</config>
I appreciate everyone's help with getting things worked out.

Now, if I could just start getting GPU WUs without having to reboot.

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 4:08 am
by bruce
The value 36330 appears on both the Connection tab of Advanced Control and on the Slots tab. Those numbers MUST match ... and you must restart the client after they're changed. The Allow entry must include 127.0.0.1.

Do you have a Telnet client installed on that system? If things still don't work, having one is often helpful in debugging connection problems.

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 4:35 am
by PantherX
Thanks for posting the configuration. However, within that directory, there will be a log or log.txt file so can you please post that since that is where any errors FAHClient encounters will be recorded and might help us to solve this issue.

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 4:53 pm
by LonePalm
Here is the log file before this morning's reboot to get a GPU WU.

Code: Select all

*********************** Log Started 2013-11-19T14:59:02Z ***********************
14:59:02:************************* Folding@home Client *************************
14:59:02:      Website: http://folding.stanford.edu/
14:59:02:    Copyright: (c) 2009-2013 Stanford University
14:59:02:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
14:59:02:         Args: --open-web-control
14:59:02:       Config: C:/ProgramData/FAHClient/config.xml
14:59:02:******************************** Build ********************************
14:59:02:      Version: 7.3.6
14:59:02:         Date: Feb 18 2013
14:59:02:         Time: 15:25:17
14:59:02:      SVN Rev: 3923
14:59:02:       Branch: fah/trunk/client
14:59:02:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
14:59:02:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
14:59:02:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
14:59:02:     Platform: win32 XP
14:59:02:         Bits: 32
14:59:02:         Mode: Release
14:59:02:******************************* System ********************************
14:59:02:          CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
14:59:02:       CPU ID: GenuineIntel Family 6 Model 58 Stepping 9
14:59:02:         CPUs: 8
14:59:02:       Memory: 7.96GiB
14:59:02:  Free Memory: 5.47GiB
14:59:02:      Threads: WINDOWS_THREADS
14:59:02:  Has Battery: false
14:59:02:   On Battery: false
14:59:02:   UTC offset: -5
14:59:02:          PID: 5992
14:59:02:          CWD: C:/ProgramData/FAHClient
14:59:02:           OS: Windows 7 Professional
14:59:02:      OS Arch: AMD64
14:59:02:         GPUs: 1
14:59:02:        GPU 0: ATI:5 Tahiti XT [Radeon HD 7970]
14:59:02:         CUDA: Not detected
14:59:02:Win32 Service: false
14:59:02:***********************************************************************
14:59:02:<config>
14:59:02:  <!-- Folding Core -->
14:59:02:  <core-priority v='low'/>
14:59:02:
14:59:02:  <!-- Folding Slot Configuration -->
14:59:02:  <power v='full'/>
14:59:02:
14:59:02:  <!-- Network -->
14:59:02:  <proxy v=':8080'/>
14:59:02:
14:59:02:  <!-- User Information -->
14:59:02:  <passkey v='********************************'/>
14:59:02:  <team v='36120'/>
14:59:02:  <user v='LonePalm'/>
14:59:02:
14:59:02:  <!-- Folding Slots -->
14:59:02:  <slot id='0' type='GPU'>
14:59:02:    <next-unit-percentage v='98'/>
14:59:02:  </slot>
14:59:02:  <slot id='1' type='CPU'>
14:59:02:    <cpus v='-1'/>
14:59:02:    <next-unit-percentage v='98'/>
14:59:02:  </slot>
14:59:02:</config>
14:59:02:Trying to access database...
14:59:02:Successfully acquired database lock
14:59:02:Enabled folding slot 00: READY gpu:0:Tahiti XT [Radeon HD 7970]
14:59:02:Enabled folding slot 01: READY cpu:7
14:59:02:WU01:FS01:Starting
14:59:02:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 01 -suffix 01 -version 703 -lifeline 5992 -checkpoint 15 -np 7
14:59:02:WU01:FS01:Started FahCore on PID 8636
14:59:02:WU01:FS01:Core PID:8480
14:59:02:WU01:FS01:FahCore 0xa4 started
14:59:03:WU00:FS00:Starting
14:59:03:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_17.fah/FahCore_17.exe -dir 00 -suffix 01 -version 703 -lifeline 5992 -checkpoint 15 -gpu 0 -gpu-vendor ati
14:59:03:WU00:FS00:Started FahCore on PID 8680
14:59:03:WU00:FS00:Core PID:8368
14:59:03:WU00:FS00:FahCore 0x17 started
14:59:03:WU01:FS01:0xa4:
14:59:03:WU01:FS01:0xa4:*------------------------------*
14:59:03:WU01:FS01:0xa4:Folding@Home Gromacs GB Core
14:59:03:WU01:FS01:0xa4:Version 2.27 (Dec. 15, 2010)
14:59:03:WU01:FS01:0xa4:
14:59:03:WU01:FS01:0xa4:Preparing to commence simulation
14:59:03:WU01:FS01:0xa4:- Ensuring status. Please wait.
14:59:03:WU00:FS00:0x17:*********************** Log Started 2013-11-19T14:59:03Z ***********************
14:59:03:WU00:FS00:0x17:Project: 8900 (Run 249, Clone 3, Gen 12)
14:59:03:WU00:FS00:0x17:Unit: 0x00000019028c126651a65e019300eba9
14:59:03:WU00:FS00:0x17:CPU: 0x00000000000000000000000000000000
14:59:03:WU00:FS00:0x17:Machine: 0
14:59:03:WU00:FS00:0x17:Digital signatures verified
14:59:03:WU00:FS00:0x17:  Found a checkpoint file
14:59:10:3:127.0.0.1:New Web connection
14:59:12:WU01:FS01:0xa4:- Looking at optimizations...
14:59:12:WU01:FS01:0xa4:- Working with standard loops on this execution.
14:59:12:WU01:FS01:0xa4:- Previous termination of core was improper.
14:59:12:WU01:FS01:0xa4:- Going to use standard loops.
14:59:12:WU01:FS01:0xa4:- Files status OK
14:59:12:WU01:FS01:0xa4:- Expanded 547695 -> 848540 (decompressed 154.9 percent)
14:59:12:WU01:FS01:0xa4:Called DecompressByteArray: compressed_data_size=547695 data_size=848540, decompressed_data_size=848540 diff=0
14:59:12:WU01:FS01:0xa4:- Digital signature verified
14:59:12:WU01:FS01:0xa4:
14:59:12:WU01:FS01:0xa4:Project: 7645 (Run 71, Clone 0, Gen 165)
14:59:12:WU01:FS01:0xa4:
14:59:12:WU01:FS01:0xa4:Entering M.D.
14:59:18:WU01:FS01:0xa4:Using Gromacs checkpoints
14:59:18:WU01:FS01:0xa4:Mapping NT from 7 to 7 
14:59:18:WU01:FS01:0xa4:Resuming from checkpoint
14:59:18:WU01:FS01:0xa4:Verified 01/wudata_01.log
14:59:18:WU01:FS01:0xa4:Verified 01/wudata_01.trr
14:59:18:WU01:FS01:0xa4:Verified 01/wudata_01.xtc
14:59:18:WU01:FS01:0xa4:Verified 01/wudata_01.edr
14:59:19:WU01:FS01:0xa4:Completed 1365910 out of 2500000 steps  (54%)
15:01:56:WU00:FS00:0x17:Completed 1050000 out of 2500000 steps (42%)
15:03:51:WARNING:WU01:FS01:FahCore crashed with Windows unhandled exception code 0xUNKNOWN_ENUM, searching for this code online may provide more information
15:03:51:WARNING:WU01:FS01:FahCore returned: UNKNOWN_ENUM (1073807364 = 0x40010004)
15:03:51:WARNING:WU00:FS00:FahCore crashed with Windows unhandled exception code 0xUNKNOWN_ENUM, searching for this code online may provide more information
15:03:51:WARNING:WU00:FS00:FahCore returned: UNKNOWN_ENUM (1073807364 = 0x40010004)
15:03:52:WU01:FS01:Starting
15:03:52:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 01 -suffix 01 -version 703 -lifeline 5992 -checkpoint 15 -np 7
15:03:52:WU01:FS01:Started FahCore on PID 6048
Here is the log since reboot.

Code: Select all

*********************** Log Started 2013-11-20T15:15:23Z ***********************
15:15:23:************************* Folding@home Client *************************
15:15:23:      Website: http://folding.stanford.edu/
15:15:23:    Copyright: (c) 2009-2013 Stanford University
15:15:23:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
15:15:23:         Args: 
15:15:23:       Config: C:/Users/Edward Rodman/AppData/Roaming/FAHClient/config.xml
15:15:23:******************************** Build ********************************
15:15:23:      Version: 7.3.6
15:15:23:         Date: Feb 18 2013
15:15:23:         Time: 15:25:17
15:15:23:      SVN Rev: 3923
15:15:23:       Branch: fah/trunk/client
15:15:23:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
15:15:23:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
15:15:23:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
15:15:23:     Platform: win32 XP
15:15:23:         Bits: 32
15:15:23:         Mode: Release
15:15:23:******************************* System ********************************
15:15:23:          CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
15:15:23:       CPU ID: GenuineIntel Family 6 Model 58 Stepping 9
15:15:23:         CPUs: 8
15:15:23:       Memory: 7.96GiB
15:15:23:  Free Memory: 5.99GiB
15:15:23:      Threads: WINDOWS_THREADS
15:15:23:  Has Battery: false
15:15:23:   On Battery: false
15:15:23:   UTC offset: -5
15:15:23:          PID: 4916
15:15:23:          CWD: C:/Users/Edward Rodman/AppData/Roaming/FAHClient
15:15:23:           OS: Windows 7 Professional
15:15:23:      OS Arch: AMD64
15:15:23:         GPUs: 1
15:15:23:        GPU 0: ATI:5 Tahiti XT [Radeon HD 7970]
15:15:23:         CUDA: Not detected
15:15:23:Win32 Service: false
15:15:23:***********************************************************************
15:15:23:<config>
15:15:23:  <!-- Folding Slot Configuration -->
15:15:23:  <power v='full'/>
15:15:23:
15:15:23:  <!-- Network -->
15:15:23:  <proxy v=':8080'/>
15:15:23:
15:15:23:  <!-- Remote Command Server -->
15:15:23:  <command-port v='36328'/>
15:15:23:
15:15:23:  <!-- User Information -->
15:15:23:  <passkey v='********************************'/>
15:15:23:  <team v='36120'/>
15:15:23:  <user v='LonePalm'/>
15:15:23:
15:15:23:  <!-- Folding Slots -->
15:15:23:  <slot id='0' type='GPU'>
15:15:23:    <next-unit-percentage v='98'/>
15:15:23:  </slot>
15:15:23:  <slot id='1' type='CPU'>
15:15:23:    <cpus v='-1'/>
15:15:23:    <next-unit-percentage v='98'/>
15:15:23:  </slot>
15:15:23:</config>
15:15:23:Trying to access database...
15:15:23:Successfully acquired database lock
15:15:23:Enabled folding slot 00: READY gpu:0:Tahiti XT [Radeon HD 7970]
15:15:23:Enabled folding slot 01: READY cpu:7
15:15:24:WU02:FS01:Starting
15:15:24:WU02:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Edward Rodman/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe" -dir 02 -suffix 01 -version 703 -lifeline 4916 -checkpoint 15 -np 7
15:15:24:WU02:FS01:Started FahCore on PID 5204
15:15:25:WU02:FS01:Core PID:5248
15:15:25:WU02:FS01:FahCore 0xa4 started
15:15:25:WU00:FS00:Connecting to assign-GPU.stanford.edu:80
15:15:26:WU02:FS01:0xa4:
15:15:26:WU02:FS01:0xa4:*------------------------------*
15:15:26:WU02:FS01:0xa4:Folding@Home Gromacs GB Core
15:15:26:WU02:FS01:0xa4:Version 2.27 (Dec. 15, 2010)
15:15:26:WU02:FS01:0xa4:
15:15:26:WU02:FS01:0xa4:Preparing to commence simulation
15:15:26:WU02:FS01:0xa4:- Ensuring status. Please wait.
15:15:26:WU00:FS00:News: Welcome to Folding@Home
15:15:26:WU00:FS00:Assigned to work server 171.64.65.69
15:15:27:WU00:FS00:Requesting new work unit for slot 00: READY gpu:0:Tahiti XT [Radeon HD 7970] from 171.64.65.69
15:15:27:WU00:FS00:Connecting to 171.64.65.69:8080
15:15:30:WU00:FS00:Downloading 4.17MiB
15:15:30:WU00:FS00:Download complete
15:15:31:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:8900 run:255 clone:6 gen:4 core:0x17 unit:0x00000009028c126651a65f6953c7f79b
15:15:31:WU00:FS00:Starting
15:15:31:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Edward Rodman/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_17.fah/FahCore_17.exe" -dir 00 -suffix 01 -version 703 -lifeline 4916 -checkpoint 15 -gpu 0 -gpu-vendor ati
15:15:31:WU00:FS00:Started FahCore on PID 5868
15:15:34:WU00:FS00:Core PID:5976
15:15:34:WU00:FS00:FahCore 0x17 started
15:15:35:WU02:FS01:0xa4:- Looking at optimizations...
15:15:35:WU02:FS01:0xa4:- Working with standard loops on this execution.
15:15:35:WU02:FS01:0xa4:- Previous termination of core was improper.
15:15:35:WU02:FS01:0xa4:- Files status OK
15:15:35:WU00:FS00:0x17:*********************** Log Started 2013-11-20T15:15:35Z ***********************
15:15:35:WU02:FS01:0xa4:- Expanded 547688 -> 848684 (decompressed 154.9 percent)
15:15:35:WU02:FS01:0xa4:Called DecompressByteArray: compressed_data_size=547688 data_size=848684, decompressed_data_size=848684 diff=0
15:15:35:WU02:FS01:0xa4:- Digital signature verified
15:15:35:WU02:FS01:0xa4:
15:15:35:WU02:FS01:0xa4:Project: 7645 (Run 76, Clone 0, Gen 160)
15:15:35:WU02:FS01:0xa4:
15:15:35:WU02:FS01:0xa4:Entering M.D.
15:15:36:WU00:FS00:0x17:Project: 8900 (Run 255, Clone 6, Gen 4)
15:15:36:WU00:FS00:0x17:Unit: 0x00000009028c126651a65f6953c7f79b
15:15:36:WU00:FS00:0x17:CPU: 0x00000000000000000000000000000000
15:15:36:WU00:FS00:0x17:Machine: 0
15:15:36:WU00:FS00:0x17:Reading tar file state.xml
15:15:36:WU00:FS00:0x17:Reading tar file system.xml
15:15:37:WU00:FS00:0x17:Reading tar file integrator.xml
15:15:37:WU00:FS00:0x17:Reading tar file core.xml
15:15:37:WU00:FS00:0x17:Digital signatures verified
15:15:37:WU00:FS00:0x17:Folding@home GPU core17
15:15:37:WU00:FS00:0x17:Version 0.0.52
15:15:41:WU02:FS01:0xa4:Using Gromacs checkpoints
15:15:41:WU02:FS01:0xa4:Mapping NT from 7 to 7 
15:15:46:WU02:FS01:0xa4:Resuming from checkpoint
15:15:46:WU02:FS01:0xa4:Verified 02/wudata_01.log
15:15:49:WU02:FS01:0xa4:Verified 02/wudata_01.trr
15:15:49:WU02:FS01:0xa4:Verified 02/wudata_01.xtc
15:15:49:WU02:FS01:0xa4:Verified 02/wudata_01.edr
15:15:49:WU02:FS01:0xa4:Completed 900380 out of 2500000 steps  (36%)
15:18:55:WU00:FS00:0x17:Completed 0 out of 2500000 steps (0%)
15:18:55:WU00:FS00:0x17:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
15:23:18:WU00:FS00:0x17:Completed 25000 out of 2500000 steps (1%)
15:27:28:WU00:FS00:0x17:Completed 50000 out of 2500000 steps (2%)
15:31:54:WU00:FS00:0x17:Completed 75000 out of 2500000 steps (3%)
15:33:46:WU02:FS01:0xa4:Completed 925000 out of 2500000 steps  (37%)
15:36:05:WU00:FS00:0x17:Completed 100000 out of 2500000 steps (4%)
15:40:37:WU00:FS00:0x17:Completed 125000 out of 2500000 steps (5%)
15:44:46:WU00:FS00:0x17:Completed 150000 out of 2500000 steps (6%)
15:49:25:WU00:FS00:0x17:Completed 175000 out of 2500000 steps (7%)
15:51:07:WU02:FS01:0xa4:Completed 950000 out of 2500000 steps  (38%)
15:53:34:WU00:FS00:0x17:Completed 200000 out of 2500000 steps (8%)
15:58:02:WU00:FS00:0x17:Completed 225000 out of 2500000 steps (9%)
16:02:11:WU00:FS00:0x17:Completed 250000 out of 2500000 steps (10%)
16:06:37:WU00:FS00:0x17:Completed 275000 out of 2500000 steps (11%)
16:07:57:FS00:Shutting core down
16:07:57:FS01:Shutting core down
16:07:57:WU00:FS00:0x17:WARNING:Console control signal 1 on PID 5976
16:07:57:WU00:FS00:0x17:Exiting, please wait. . .
16:07:57:WU00:FS00:0x17:Lost lifeline PID 5868, exiting
16:07:57:WU00:FS00:0x17:ERROR:103: Lost client lifeline
16:07:57:WU00:FS00:0x17:Folding@home Core Shutdown: CLIENT_DIED
16:07:57:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
16:07:58:WU02:FS01:0xa4:Client no longer detected. Shutting down core 
16:07:58:WU02:FS01:0xa4:
16:07:58:WU02:FS01:0xa4:Folding@home Core Shutdown: CLIENT_DIED
16:07:58:WU02:FS01:FahCore returned: INTERRUPTED (102 = 0x66)
16:07:58:WU02:FS01:Starting
16:07:58:WARNING:WU02:FS01:Changed SMP threads from 7 to 4 this can cause some work units to fail
16:07:58:WU02:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Edward Rodman/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe" -dir 02 -suffix 01 -version 703 -lifeline 4916 -checkpoint 15 -np 4
16:07:58:WU02:FS01:Started FahCore on PID 7900
16:07:58:WU02:FS01:Core PID:7336
16:07:58:WU02:FS01:FahCore 0xa4 started
16:07:59:WU02:FS01:0xa4:
16:07:59:WU02:FS01:0xa4:*------------------------------*
16:07:59:WU02:FS01:0xa4:Folding@Home Gromacs GB Core
16:07:59:WU02:FS01:0xa4:Version 2.27 (Dec. 15, 2010)
16:07:59:WU02:FS01:0xa4:
16:07:59:WU02:FS01:0xa4:Preparing to commence simulation
16:07:59:WU02:FS01:0xa4:- Looking at optimizations...
16:07:59:WU02:FS01:0xa4:- Files status OK
16:07:59:WU02:FS01:0xa4:- Expanded 547688 -> 848684 (decompressed 154.9 percent)
16:07:59:WU02:FS01:0xa4:Called DecompressByteArray: compressed_data_size=547688 data_size=848684, decompressed_data_size=848684 diff=0
16:07:59:WU02:FS01:0xa4:- Digital signature verified
16:07:59:WU02:FS01:0xa4:
16:07:59:WU02:FS01:0xa4:Project: 7645 (Run 76, Clone 0, Gen 160)
16:07:59:WU02:FS01:0xa4:
16:07:59:WU02:FS01:0xa4:Assembly optimizations on if available.
16:07:59:WU02:FS01:0xa4:Entering M.D.
16:08:02:FS01:Shutting core down
16:08:04:WU00:FS00:Starting
16:08:04:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Edward Rodman/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_17.fah/FahCore_17.exe" -dir 00 -suffix 01 -version 703 -lifeline 4916 -checkpoint 15 -gpu 0 -gpu-vendor ati
16:08:04:WU00:FS00:Started FahCore on PID 3644
16:08:04:WU00:FS00:Core PID:7924
16:08:04:WU00:FS00:FahCore 0x17 started
16:08:04:WU00:FS00:0x17:*********************** Log Started 2013-11-20T16:08:04Z ***********************
16:08:04:WU00:FS00:0x17:Project: 8900 (Run 255, Clone 6, Gen 4)
16:08:04:WU00:FS00:0x17:Unit: 0x00000009028c126651a65f6953c7f79b
16:08:04:WU00:FS00:0x17:CPU: 0x00000000000000000000000000000000
16:08:04:WU00:FS00:0x17:Machine: 0
16:08:04:WU00:FS00:0x17:Digital signatures verified
16:08:04:WU00:FS00:0x17:Folding@home GPU core17
16:08:04:WU00:FS00:0x17:Version 0.0.52
16:08:04:WU00:FS00:0x17:  Found a checkpoint file
16:08:04:WU02:FS01:0xa4:Using Gromacs checkpoints
16:08:04:WU02:FS01:0xa4:Mapping NT from 4 to 4 
16:08:04:WU02:FS01:0xa4:Resuming from checkpoint
16:08:04:WU02:FS01:0xa4:Verified 02/wudata_01.log
16:08:04:WU02:FS01:0xa4:Verified 02/wudata_01.trr
16:08:05:WU02:FS01:0xa4:Verified 02/wudata_01.xtc
16:08:05:WU02:FS01:0xa4:Verified 02/wudata_01.edr
16:08:05:WU02:FS01:0xa4:Completed 964260 out of 2500000 steps  (38%)
16:08:08:WU02:FS01:FahCore returned: INTERRUPTED (102 = 0x66)
16:08:58:WU02:FS01:Starting
16:08:58:WARNING:WU02:FS01:Changed SMP threads from 4 to 7 this can cause some work units to fail
16:08:58:WU02:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Edward Rodman/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe" -dir 02 -suffix 01 -version 703 -lifeline 4916 -checkpoint 15 -np 7
16:08:58:WU02:FS01:Started FahCore on PID 5400
16:08:58:WU02:FS01:Core PID:1404
16:08:58:WU02:FS01:FahCore 0xa4 started
16:08:59:WU02:FS01:0xa4:
16:08:59:WU02:FS01:0xa4:*------------------------------*
16:08:59:WU02:FS01:0xa4:Folding@Home Gromacs GB Core
16:08:59:WU02:FS01:0xa4:Version 2.27 (Dec. 15, 2010)
16:08:59:WU02:FS01:0xa4:
16:08:59:WU02:FS01:0xa4:Preparing to commence simulation
16:08:59:WU02:FS01:0xa4:- Looking at optimizations...
16:08:59:WU02:FS01:0xa4:- Files status OK
16:08:59:WU02:FS01:0xa4:- Expanded 547688 -> 848684 (decompressed 154.9 percent)
16:08:59:WU02:FS01:0xa4:Called DecompressByteArray: compressed_data_size=547688 data_size=848684, decompressed_data_size=848684 diff=0
16:08:59:WU02:FS01:0xa4:- Digital signature verified
16:08:59:WU02:FS01:0xa4:
16:08:59:WU02:FS01:0xa4:Project: 7645 (Run 76, Clone 0, Gen 160)
16:08:59:WU02:FS01:0xa4:
16:08:59:WU02:FS01:0xa4:Assembly optimizations on if available.
16:08:59:WU02:FS01:0xa4:Entering M.D.
16:09:05:Saving configuration to config.xml
16:09:05:<config>
16:09:05:  <!-- Folding Slot Configuration -->
16:09:05:  <power v='full'/>
16:09:05:
16:09:05:  <!-- Network -->
16:09:05:  <proxy v=':8080'/>
16:09:05:
16:09:05:  <!-- Remote Command Server -->
16:09:05:  <command-port v='36328'/>
16:09:05:
16:09:05:  <!-- User Information -->
16:09:05:  <passkey v='********************************'/>
16:09:05:  <team v='36120'/>
16:09:05:  <user v='LonePalm'/>
16:09:05:
16:09:05:  <!-- Folding Slots -->
16:09:05:  <slot id='0' type='GPU'>
16:09:05:    <next-unit-percentage v='98'/>
16:09:05:  </slot>
16:09:05:  <slot id='1' type='CPU'>
16:09:05:    <cpus v='-1'/>
16:09:05:    <next-unit-percentage v='98'/>
16:09:05:  </slot>
16:09:05:</config>
16:09:05:WU02:FS01:0xa4:Using Gromacs checkpoints
16:09:05:WU02:FS01:0xa4:Mapping NT from 7 to 7 
16:09:05:WU02:FS01:0xa4:Resuming from checkpoint
16:09:05:WU02:FS01:0xa4:Verified 02/wudata_01.log
16:09:05:WU02:FS01:0xa4:Verified 02/wudata_01.trr
16:09:05:WU02:FS01:0xa4:Verified 02/wudata_01.xtc
16:09:05:WU02:FS01:0xa4:Verified 02/wudata_01.edr
16:09:05:WU02:FS01:0xa4:Completed 964260 out of 2500000 steps  (38%)
16:10:20:WU00:FS00:0x17:Completed 250000 out of 2500000 steps (10%)
16:10:20:WU00:FS00:0x17:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
16:14:47:WU00:FS00:0x17:Completed 275000 out of 2500000 steps (11%)
16:16:31:WU02:FS01:0xa4:Completed 975000 out of 2500000 steps  (39%)
16:19:00:WU00:FS00:0x17:Completed 300000 out of 2500000 steps (12%)
16:23:30:WU00:FS00:0x17:Completed 325000 out of 2500000 steps (13%)
16:27:43:WU00:FS00:0x17:Completed 350000 out of 2500000 steps (14%)
16:32:13:WU00:FS00:0x17:Completed 375000 out of 2500000 steps (15%)
16:33:37:WU02:FS01:0xa4:Completed 1000000 out of 2500000 steps  (40%)
16:36:27:WU00:FS00:0x17:Completed 400000 out of 2500000 steps (16%)
16:40:57:WU00:FS00:0x17:Completed 425000 out of 2500000 steps (17%)
16:45:10:WU00:FS00:0x17:Completed 450000 out of 2500000 steps (18%)
I accidentally clicked on the folding speed line but put it right back to full folding.

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 5:27 pm
by 7im
As long as the command port setting is not the default setting, I am not comfortable that nothing else has also changed.

I know this is a pain, but please finish all the current WUs, and uninstall the fah app, INCLUDING the data. Reboot, then reinstall FAH using the defaults. By no means a guaranteed fix, but I would feel better troubleshooting on a known good installation than a potentially altered installation. Thanks.

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 5:34 pm
by LonePalm
All right. I'll wait until the GPU finishes about 2230Z and then completely wipe everything. It will put a hurt on today's and tomorrow's folding numbers.

I will keep a copy in a back up directory.

Thank you all for your help. I know this is a pain.

Re: GPU WU issues spreading to CPU WUs

Posted: Wed Nov 20, 2013 11:44 pm
by LonePalm
OK, here's how things went.

The GPU WU completed and uploaded its results but did not download a new WU even though it started trying at 98% complete.
I stopped all folding. Created new folders and copied off the data and programs.
Uninstalled FAH complete with data.
Restarted the computer to get an absolutely clean install.
Installed FAH from the install program I downloaded yesterday.
Entered personal information into the Web Control page and saved.
Started FAH Control. The configuration still showed port 36328. When I changed it to 36330 everything displayed.
The GPU immediately downloaded a WU but I hat to reboot one more time before the CPU downloaded a WU.

Here is the most recent log file.

Code: Select all

*********************** Log Started 2013-11-20T23:14:30Z ***********************
23:14:30:************************* Folding@home Client *************************
23:14:30:      Website: http://folding.stanford.edu/
23:14:30:    Copyright: (c) 2009-2013 Stanford University
23:14:30:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
23:14:30:         Args: 
23:14:30:       Config: C:/Users/Edward Rodman/AppData/Roaming/FAHClient/config.xml
23:14:30:******************************** Build ********************************
23:14:30:      Version: 7.3.6
23:14:30:         Date: Feb 18 2013
23:14:30:         Time: 15:25:17
23:14:30:      SVN Rev: 3923
23:14:30:       Branch: fah/trunk/client
23:14:30:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
23:14:30:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
23:14:30:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
23:14:30:     Platform: win32 XP
23:14:30:         Bits: 32
23:14:30:         Mode: Release
23:14:30:******************************* System ********************************
23:14:30:          CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
23:14:30:       CPU ID: GenuineIntel Family 6 Model 58 Stepping 9
23:14:30:         CPUs: 8
23:14:30:       Memory: 7.96GiB
23:14:30:  Free Memory: 6.59GiB
23:14:30:      Threads: WINDOWS_THREADS
23:14:30:  Has Battery: false
23:14:30:   On Battery: false
23:14:30:   UTC offset: -5
23:14:30:          PID: 4264
23:14:30:          CWD: C:/Users/Edward Rodman/AppData/Roaming/FAHClient
23:14:30:           OS: Windows 7 Professional
23:14:30:      OS Arch: AMD64
23:14:30:         GPUs: 1
23:14:30:        GPU 0: ATI:5 Tahiti XT [Radeon HD 7970]
23:14:30:         CUDA: Not detected
23:14:30:Win32 Service: false
23:14:30:***********************************************************************
23:14:30:<config>
23:14:30:  <!-- Folding Slot Configuration -->
23:14:30:  <power v='full'/>
23:14:30:
23:14:30:  <!-- Network -->
23:14:30:  <proxy v=':8080'/>
23:14:30:
23:14:30:  <!-- User Information -->
23:14:30:  <passkey v='********************************'/>
23:14:30:  <team v='36120'/>
23:14:30:  <user v='LonePalm'/>
23:14:30:
23:14:30:  <!-- Folding Slots -->
23:14:30:  <slot id='0' type='GPU'/>
23:14:30:  <slot id='1' type='CPU'/>
23:14:30:</config>
23:14:31:Trying to access database...
23:14:44:Successfully acquired database lock
23:14:44:Enabled folding slot 00: READY gpu:0:Tahiti XT [Radeon HD 7970]
23:14:44:Enabled folding slot 01: READY cpu:7
23:14:54:WU01:FS00:Starting
23:14:54:WU01:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Edward Rodman/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_17.fah/FahCore_17.exe" -dir 01 -suffix 01 -version 703 -lifeline 4264 -checkpoint 15 -gpu 0 -gpu-vendor ati
23:14:54:WU01:FS00:Started FahCore on PID 4684
23:14:59:WU01:FS00:Core PID:2796
23:14:59:WU01:FS00:FahCore 0x17 started
23:15:01:WU00:FS01:Connecting to assign3.stanford.edu:8080
23:15:02:WU00:FS01:News: Welcome to Folding@Home
23:15:02:WU00:FS01:Assigned to work server 171.64.65.101
23:15:02:WU00:FS01:Requesting new work unit for slot 01: READY cpu:7 from 171.64.65.101
23:15:02:WU00:FS01:Connecting to 171.64.65.101:8080
23:15:04:WU00:FS01:Downloading 535.37KiB
23:15:04:WU00:FS01:Download complete
23:15:05:WU00:FS01:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:7647 run:60 clone:0 gen:175 core:0xa4 unit:0x0000053e664f2dcd4fa7fe50b760a5d0
23:15:07:WU00:FS01:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah
23:15:07:WU00:FS01:Connecting to www.stanford.edu:80
23:15:07:WU01:FS00:0x17:*********************** Log Started 2013-11-20T23:15:07Z ***********************
23:15:07:WU01:FS00:0x17:Project: 8900 (Run 198, Clone 2, Gen 16)
23:15:07:WU01:FS00:0x17:Unit: 0x00000020028c126651a6529cefe0cec2
23:15:07:WU01:FS00:0x17:CPU: 0x00000000000000000000000000000000
23:15:07:WU01:FS00:0x17:Machine: 0
23:15:07:WU01:FS00:0x17:Digital signatures verified
23:15:07:WU01:FS00:0x17:Folding@home GPU core17
23:15:07:WU01:FS00:0x17:Version 0.0.52
23:15:08:WU00:FS01:FahCore a4: Downloading 2.89MiB
23:15:14:WU00:FS01:FahCore a4: 62.76%
23:15:17:WU00:FS01:FahCore a4: Download complete
23:15:17:WU00:FS01:Valid core signature
23:15:17:WU00:FS01:Unpacked 9.59MiB to cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe
23:15:18:WU00:FS01:Starting
23:15:18:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" "C:/Users/Edward Rodman/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe" -dir 00 -suffix 01 -version 703 -lifeline 4264 -checkpoint 15 -np 7
23:15:18:WU00:FS01:Started FahCore on PID 2728
23:15:22:WU00:FS01:Core PID:5236
23:15:22:WU00:FS01:FahCore 0xa4 started
23:15:24:WU00:FS01:0xa4:
23:15:24:WU00:FS01:0xa4:*------------------------------*
23:15:24:WU00:FS01:0xa4:Folding@Home Gromacs GB Core
23:15:24:WU00:FS01:0xa4:Version 2.27 (Dec. 15, 2010)
23:15:24:WU00:FS01:0xa4:
23:15:24:WU00:FS01:0xa4:Preparing to commence simulation
23:15:24:WU00:FS01:0xa4:- Looking at optimizations...
23:15:24:WU00:FS01:0xa4:- Created dyn
23:15:24:WU00:FS01:0xa4:- Files status OK
23:15:24:WU00:FS01:0xa4:- Expanded 547709 -> 847380 (decompressed 154.7 percent)
23:15:24:WU00:FS01:0xa4:Called DecompressByteArray: compressed_data_size=547709 data_size=847380, decompressed_data_size=847380 diff=0
23:15:24:WU00:FS01:0xa4:- Digital signature verified
23:15:24:WU00:FS01:0xa4:
23:15:24:WU00:FS01:0xa4:Project: 7647 (Run 60, Clone 0, Gen 175)
23:15:24:WU00:FS01:0xa4:
23:15:25:WU00:FS01:0xa4:Assembly optimizations on if available.
23:15:25:WU00:FS01:0xa4:Entering M.D.
23:15:31:WU00:FS01:0xa4:Mapping NT from 7 to 7 
23:15:31:WU00:FS01:0xa4:Completed 0 out of 2500000 steps  (0%)
23:18:41:WU01:FS00:0x17:Completed 0 out of 2500000 steps (0%)
23:18:41:WU01:FS00:0x17:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
23:23:05:WU01:FS00:0x17:Completed 25000 out of 2500000 steps (1%)
23:27:15:WU01:FS00:0x17:Completed 50000 out of 2500000 steps (2%)
23:31:42:WU01:FS00:0x17:Completed 75000 out of 2500000 steps (3%)
23:33:43:WU00:FS01:0xa4:Completed 25000 out of 2500000 steps  (1%)
23:35:51:WU01:FS00:0x17:Completed 100000 out of 2500000 steps (4%)
23:40:18:WU01:FS00:0x17:Completed 125000 out of 2500000 steps (5%)

Re: GPU WU issues spreading to CPU WUs

Posted: Thu Nov 21, 2013 2:34 am
by PantherX
LonePalm wrote:...

Code: Select all

...
14:59:02:       Config: C:/ProgramData/FAHClient/config.xml
...
14:59:02:          CWD: C:/ProgramData/FAHClient
...
Here is the log since reboot.

Code: Select all

...
15:15:23:       Config: C:/Users/Edward Rodman/AppData/Roaming/FAHClient/config.xml
...
15:15:23:          CWD: C:/Users/Edward Rodman/AppData/Roaming/FAHClient
...
...
This is very peculiar. You seem to have two installations of F@H, one as a multi-user (C:\ProgramData\FAHClient) and the other as a single user (C:\Users\Edward Rodman\AppData\Roaming\FAHClient). Any idea as to what happened that you installed F@H twice?

Your fresh installation came from the single user (C:\Users\Edward Rodman\AppData\Roaming\FAHClient). However, can you please check if there if a FAHClient folder in the C:\ProgramData Folder (it is a hidden folder by default so you may have to select the show the hidden folders option). If so, I would suggest that you set your F@H to Finish and once done, uninstall it including the data and check to ensure that FAHClient folder isn't present in these locations (assuming that you selected the default paths during all your previous installations):
C:\ProgramData Folder
C:\Users\Edward Rodman\AppData\Roaming
C:\Program Files (x86)

Even if after uninstallation FAHClient folder is present, you may have to manually delete them. Once that is all done, you can then proceed to installing F@H in either the single user or multi-user location, depends on your choice.

Re: GPU WU issues spreading to CPU WUs

Posted: Thu Nov 21, 2013 4:58 am
by LonePalm
OK, you lost me there. The Code files you are quoting from was deleted earlier today.

I uninstalled everything and installed it ONE time just for me.

The config data in .../AppData/Roaming/FAHClient was last updated yesterday. I did the clean install today.

Yes, there is a FAHClient folder under c:/ProgramData
Yes there is a FAHClient folder under c:/Program Files (x86)

Can I just delete the folder under .../AppData\Roaming? It hasn't updated today.

Re: GPU WU issues spreading to CPU WUs

Posted: Thu Nov 21, 2013 12:49 pm
by PantherX
Okay, let me explain it in another manner.

When you choose to install F@H on your system, you chose just for me option (single user) so this will create two default locations on your system:
User data files -> C:\Users\Edward Rodman\AppData\Roaming\FAHClient
Program files -> C:\Program Files (x86)\FAHClient

Alternatively, when you chose to install for everybody on the system (multi user), it will create two default locations on your system:
Shared user data files -> C:\ProgramData\FAHClient
Program files -> C:\Program Files (x86)\FAHClient

Thus, on a single system, at any given time, you can either have a single user installation or a multi user installation. Not both. The logs that you posted previously, indicated you had both which isn't expected and could cause issues.

You have stated that you uninstalled F@H and did a fresh installation for a single user. However, you have a FAHClient folder in C:\ProgramData\ which cannot exist for a single user. My best guess is that with "double" installation, when you uninstalled F@H, only one location is removed while the other remains. Regarding the deletion, you can't delete the C:\Users\Edward Rodman\AppData\Roaming\FAHClient folder since that is what is being used for F@H in a single user set-up. I wouldn't be overly concerned about the time-stamp. Rather, I would delete the multi user C:\ProgramData\FAHClient folder since the set-up is done for a single user.

However, I would recommend that you set your Slots to Finish and once done. Perform an uninstallation and select the option to delete the data. Once successfully done, look to see if there is a FAHClient folder in the following locations:
C:\Program Files (x86)
C:\ProgramData
C:\Users\Edward Rodman\AppData\Roaming
If there is a FAHClient folder, simply delete it and then, start the installation of V7.3.6 and chose just for me (single user) and once successfully completed, you will notice that FAHClient folders will only be present in:
C:\Program Files (x86) -> Will be used by the program
C:\Users\Edward Rodman\AppData\Roaming -> Will store all the FahCores and WUs that FAHClient will be using.
All times are UTC
Page 4 of 7

Powered by phpBB® Forum Software © phpBB Limited