Page 3 of 3
Re: Zone Alarm Help Request
Posted: Wed Nov 23, 2011 5:25 am
by Amaruk
Since I was planning to dual boot from a different HDD anyway, I did a fresh install of 7 on the new drive.
Installed Zone Alarm free edition, version 10.1.056.000 as well as AVG Free, version 2012.0.1873
No issues receiving/uploading finished work.
Code: Select all
[04:53:15] Completed 495000 out of 500000 steps (99%)
[04:56:24] Completed 500000 out of 500000 steps (100%)
[04:56:25] DynamicWrapper: Finished Work Unit: sleep=10000
[04:56:35]
[04:56:35] Finished Work Unit:
[04:56:35] - Reading up to 3698928 from "work/wudata_01.trr": Read 3698928
[04:56:35] trr file hash check passed.
[04:56:35] edr file hash check passed.
[04:56:35] logfile size: 58843
[04:56:35] Leaving Run
[04:56:38] - Writing 3793099 bytes of core data to disk...
[04:56:39] Done: 3792587 -> 3520421 (compressed to 92.8 percent)
[04:56:39] ... Done.
[04:56:39] - Shutting down core
[04:56:39]
[04:56:39] Folding@home Core Shutdown: FINISHED_UNIT
[04:56:42] CoreStatus = 64 (100)
[04:56:42] Unit 1 finished with 94 percent of time to deadline remaining.
[04:56:42] Updated performance fraction: 0.940854
[04:56:42] Sending work to server
[04:56:42] Project: 6981 (Run 0, Clone 96, Gen 397)
[04:56:42] + Attempting to send results [November 23 04:56:42 UTC]
[04:56:42] - Reading file work/wuresults_01.dat from core
[04:56:42] (Read 3520933 bytes from disk)
[04:56:42] Connecting to http://128.143.199.96:8080/
[04:56:53] Posted data.
[04:56:53] Initial: 0000; - Uploaded at ~312 kB/s
[04:56:53] - Averaged speed for that direction ~312 kB/s
[04:56:53] + Results successfully sent
[04:56:53] Thank you for your contribution to Folding@Home.
[04:56:53] + Starting local stats count at 1
[04:56:57] Trying to send all finished work units
[04:56:57] + No unsent completed units remaining.
[04:56:57] - Preparing to get new work unit...
[04:56:57] Cleaning up work directory
[04:56:57] + Attempting to get work packet
[04:56:57] Passkey found
[04:56:57] - Will indicate memory of 6135 MB
[04:56:57] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 10, Stepping: 5
[04:56:57] - Connecting to assignment server
[04:56:57] Connecting to http://assign.stanford.edu:8080/
[04:56:58] Posted data.
[04:56:58] Initial: 8F80; - Successful: assigned to (128.143.199.96).
[04:56:58] + News From Folding@Home: Welcome to Folding@Home
[04:56:58] Loaded queue successfully.
[04:56:58] Sent data
[04:56:58] Connecting to http://128.143.199.96:8080/
[04:56:59] Posted data.
[04:56:59] Initial: 0000; - Receiving payload (expected size: 1767962)
[04:57:04] - Downloaded at ~345 kB/s
[04:57:04] - Averaged speed for that direction ~345 kB/s
[04:57:04] + Received work.
[04:57:04] Trying to send all finished work units
[04:57:04] + No unsent completed units remaining.
[04:57:04] + Closed connections
[04:57:04]
[04:57:04] + Processing work unit
[04:57:04] Core required: FahCore_a3.exe
[04:57:04] Core found.
[04:57:04] Working on queue slot 02 [November 23 04:57:04 UTC]
[04:57:04] + Working ...
[04:57:04] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 8 -che
ckpoint 15 -verbose -lifeline 5032 -version 634'
[04:57:04]
[04:57:04] *------------------------------*
[04:57:04] Folding@Home Gromacs SMP Core
[04:57:04] Version 2.27 (Dec. 15, 2010)
[04:57:04]
[04:57:04] Preparing to commence simulation
[04:57:04] - Looking at optimizations...
[04:57:04] - Created dyn
[04:57:04] - Files status OK
[04:57:05] - Expanded 1767450 -> 1955416 (decompressed 110.6 percent)
[04:57:05] Called DecompressByteArray: compressed_data_size=1767450 data_size=19
55416, decompressed_data_size=1955416 diff=0
[04:57:05] - Digital signature verified
[04:57:05]
[04:57:05] Project: 6993 (Run 0, Clone 3, Gen 175)
[04:57:05]
[04:57:05] Assembly optimizations on if available.
[04:57:05] Entering M.D.
[04:57:11] Mapping NT from 8 to 8
[04:57:11] Completed 0 out of 500000 steps (0%)
[05:00:29] Completed 5000 out of 500000 steps (1%)
Out of curiosity, do you have MPI installed on your machine? This fresh install of mine does not have it as it's no longer required, and the cores did not ask for access.
The previous install included MPI and the cores did ask for access.
What are the firewall permissions for the cores? Do they have trusted only, or both trusted & internet?
Re: Zone Alarm Help Request
Posted: Wed Nov 23, 2011 5:42 am
by gwildperson
Cores do not need special firewall permissions (unless you run MPI). Clients do.
Re: Zone Alarm Help Request
Posted: Fri Nov 25, 2011 11:11 pm
by Amaruk
gwildperson wrote:Cores do not need special firewall permissions (unless you run MPI). Clients do.
Interestingly enough, core permissions turned out to be completely irrelevant running 6.34, at least on my machine w/MPI installed.
This is what happened after I completely blocked A3 from all access, both local & Internet.
Code: Select all
--- Opening Log file [November 25 19:17:48 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.34
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\Fuzzy\SMP634
Executable: C:\Users\Fuzzy\SMP634\FAH6.34-win32-SMP.exe
Arguments: -oneunit -smp -verbosity 9 -advmethods
[19:17:48] - Ask before connecting: No
[19:17:48] - User name: Amaruk (Team 50625)
[19:17:48] - User ID: 425D5ECE28BC03F8
[19:17:48] - Machine ID: 1
[19:17:48]
[19:17:48] Loaded queue successfully.
[19:17:48]
[19:17:48] + Processing work unit
[19:17:48] - Autosending finished units... [19:17:48]
[19:17:48] Trying to send all finished work units
[19:17:48] Core required: FahCore_a3.exe
[19:17:48] + No unsent completed units remaining.
[19:17:48] Core found.
[19:17:48] - Autosend completed
[19:17:48] Working on queue slot 05 [November 25 19:17:48 UTC]
[19:17:48] + Working ...
[19:17:48] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 05 -np 8 -checkpoint 15 -verbose -lifeline 3452 -version 634'
[19:17:49]
[19:17:49] *------------------------------*
[19:17:49] Folding@Home Gromacs SMP Core
[19:17:49] Version 2.27 (Dec. 15, 2010)
[19:17:49]
[19:17:49] Preparing to commence simulation
[19:17:49] - Ensuring status. Please wait.
[19:17:58] - Looking at optimizations...
[19:17:58] - Working with standard loops on this execution.
[19:17:58] - Previous termination of core was improper.
[19:17:58] - Going to use standard loops.
[19:17:58] - Files status OK
[19:17:58] - Expanded 1769389 -> 1957708 (decompressed 110.6 percent)
[19:17:58] Called DecompressByteArray: compressed_data_size=1769389 data_size=1957708, decompressed_data_size=1957708 diff=0
[19:17:58] - Digital signature verified
[19:17:58]
[19:17:58] Project: 6975 (Run 0, Clone 32, Gen 360)
[19:17:58]
[19:17:58] Entering M.D.
[19:18:04] Using Gromacs checkpoints
[19:18:04] Mapping NT from 8 to 8
[19:18:04] Resuming from checkpoint
[19:18:04] Verified work/wudata_05.log
[19:18:04] Verified work/wudata_05.trr
[19:18:04] Verified work/wudata_05.edr
[19:18:04] Completed 365714 out of 500000 steps (73%)
[19:20:54] Completed 370000 out of 500000 steps (74%)
[19:24:10] Completed 375000 out of 500000 steps (75%)
[19:27:26] Completed 380000 out of 500000 steps (76%)
[19:30:42] Completed 385000 out of 500000 steps (77%)
[19:33:58] Completed 390000 out of 500000 steps (78%)
[19:37:13] Completed 395000 out of 500000 steps (79%)
[19:40:32] Completed 400000 out of 500000 steps (80%)
[19:43:47] Completed 405000 out of 500000 steps (81%)
[19:47:02] Completed 410000 out of 500000 steps (82%)
[19:50:18] Completed 415000 out of 500000 steps (83%)
[19:53:35] Completed 420000 out of 500000 steps (84%)
[19:56:51] Completed 425000 out of 500000 steps (85%)
[20:00:07] Completed 430000 out of 500000 steps (86%)
[20:03:23] Completed 435000 out of 500000 steps (87%)
[20:06:41] Completed 440000 out of 500000 steps (88%)
[20:09:59] Completed 445000 out of 500000 steps (89%)
[20:13:17] Completed 450000 out of 500000 steps (90%)
[20:16:38] Completed 455000 out of 500000 steps (91%)
[20:19:55] Completed 460000 out of 500000 steps (92%)
[20:23:11] Completed 465000 out of 500000 steps (93%)
[20:26:28] Completed 470000 out of 500000 steps (94%)
[20:29:45] Completed 475000 out of 500000 steps (95%)
[20:33:01] Completed 480000 out of 500000 steps (96%)
[20:36:19] Completed 485000 out of 500000 steps (97%)
[20:39:35] Completed 490000 out of 500000 steps (98%)
[20:42:51] Completed 495000 out of 500000 steps (99%)
[20:46:08] Completed 500000 out of 500000 steps (100%)
[20:46:09] DynamicWrapper: Finished Work Unit: sleep=10000
[20:46:19]
[20:46:19] Finished Work Unit:
[20:46:19] - Reading up to 3701664 from "work/wudata_05.trr": Read 3701664
[20:46:19] trr file hash check passed.
[20:46:19] edr file hash check passed.
[20:46:19] logfile size: 59148
[20:46:19] Leaving Run
[20:46:24] - Writing 3796140 bytes of core data to disk...
[20:46:25] Done: 3795628 -> 3523596 (compressed to 92.8 percent)
[20:46:25] ... Done.
[20:46:26] - Shutting down core
[20:46:26]
[20:46:26] Folding@home Core Shutdown: FINISHED_UNIT
[20:46:29] CoreStatus = 64 (100)
[20:46:29] Unit 5 finished with 94 percent of time to deadline remaining.
[20:46:29] Updated performance fraction: 0.944479
[20:46:29] Sending work to server
[20:46:29] Project: 6975 (Run 0, Clone 32, Gen 360)
[20:46:29] + Attempting to send results [November 25 20:46:29 UTC]
[20:46:29] - Reading file work/wuresults_05.dat from core
[20:46:29] (Read 3524108 bytes from disk)
[20:46:29] Connecting to http://128.143.199.96:8080/
[20:46:40] Posted data.
[20:46:40] Initial: 0000; - Uploaded at ~312 kB/s
[20:46:40] - Averaged speed for that direction ~335 kB/s
[20:46:40] + Results successfully sent
[20:46:40] Thank you for your contribution to Folding@Home.
[20:46:40] + Number of Units Completed: 227
[20:46:44] Trying to send all finished work units
[20:46:44] + No unsent completed units remaining.
[20:46:44] + -oneunit flag given and have now finished a unit. Exiting.***** Got a SIGTERM signal (2)
[20:46:44] Killing all core threads
[20:46:44] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown.
No issues even though the core is blocked. I have not been able to recreate the issues Vgolfmaster is having with ZA free, version 9 or 10.
At this point it seems either that install of ZA is broken or the cause lies elsewhere.
Re: Zone Alarm Help Request
Posted: Tue Nov 29, 2011 8:38 pm
by Vgolfmaster
Here is yet another thread with the exact same ZA issue, seems that I am not alone.....
viewtopic.php?f=18&t=18527&start=45
So here is where I am at with this. I uninstalled ZA a while back and tried a CA suite available from my provider. This has been since my initial issues with sending wu's. CA allowed both clients to send with no issues. Uninstalled CA, rebooted, and reinstalled ZA. For the first week or so, it also allowed them to send with no issues. Curious. Now a week or so after the 2nd installation of ZA, it is now doing the same thing. No other machine on my network has issues sending, it is only this machine running ZA. Here is an example of this, from a short time ago.
With ZA running:
note: the servers referenced here are active and show no errors.
Then, shortly after this, I closed ZA and restarted the client:
Unfortunately, the successful upload did not reference a server i.p. for comparison.