Folding Forum

Community driven support forum for Folding@home
https://foldingforum.org/

171.67.108.33 - Not uploading WU's

https://foldingforum.org/viewtopic.php?t=19167

Page 3 of 4

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 1:12 pm
by bruce
Please list all security software that you are running.

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 2:21 pm
by unijabnx2000
symantec on the computer. and the built-in stuff in the router and modem that block icmp/telnet and a couple other protocols.

And ive turned them off when the F@H program is on. But it makes no difference.

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 3:40 pm
by bruce
Recent products from Symantec do contain a firewall which blocks unapproved programs from uploading results. Have you created an exception that permits the FAH program from contacting the internet?

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 4:17 pm
by unijabnx2000
Its not an issue, FAH is not being blocked by my firewall.

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 5:33 pm
by 7im
How did you confirm this?

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 5:41 pm
by unijabnx2000
first i disabled it....
and when i turned it back on.
and looked in the applications list. It was marked with an allow check, and not a block/deny check.

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 5:43 pm
by 7im
Which applications? fahclient, fahcore, fahcontrol?

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 6:43 pm
by unijabnx2000
when the FAH program is running, all the applications listed all show allow.

http://i211.photobucket.com/albums/bb11 ... cture1.jpg

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 9:05 pm
by bruce
From your last log:

Code: Select all

    [17:47:10] Trying to send all finished work units
    [17:47:10] + No unsent completed units remaining.
    [17:47:10] - Autosend completed
shows that there's nothing to be uploaded, at that point, as does the queueinfo data shown a little later.

Project: 6882 (Run 221, Clone 8, Gen 5) is then starting but not finished during the log that you posted. At least for that segment, there's nothing wrong.

The graphs on your photobucket screenshot do not show any appreciable network traffic. How about getting to the point where something is TRYING to upload something and capture the information from both the log and in the screenshot.

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 9:25 pm
by unijabnx2000
Both the spikes on the bottom left graph are uploads from the FAH program. you can see ZERO has been blocked in the outgoing category.
and 238KB has uploaded (mere seconds after i restarted the program)
http://i211.photobucket.com/albums/bb11 ... cture2.jpg



Latest from the log file:

Code: Select all

PF: 0.919692 based on last 4 slot(s)
[19:11:45] Completed 1800000 out of 2500000 steps  (72%)
[19:53:00] Completed 1825000 out of 2500000 steps  (73%)
[20:34:57] Completed 1850000 out of 2500000 steps  (74%)
[21:16:28] Completed 1875000 out of 2500000 steps  (75%)
[21:19:39] ***** Got a SIGTERM signal (2)
[21:19:39] Killing all core threads

Folding@Home Client Shutdown.


--- Opening Log file [July 26 21:20:33 UTC] 


# Windows CPU Systray Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.23

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Users\Raid\AppData\Roaming\Folding@home-x86
Arguments: -verbosity 9 

[21:20:33] - Ask before connecting: No
[21:20:33] - User name: Anonymous (Team 32)
[21:20:33] - User ID: 1E006E3D622C7F9F
[21:20:33] - Machine ID: 1
[21:20:33] 
[21:20:33] Loaded queue successfully.
[21:20:33] Initialization complete
[21:20:33] 
[21:20:33] + Processing work unit
[21:20:33] - Autosending finished units... [July 26 21:20:33 UTC]
[21:20:33] Trying to send all finished work units
[21:20:33] Project: 6884 (Run 109, Clone 9, Gen 2)
[21:20:33] - Read packet limit of 540015616... Set to 524286976.


[21:20:33] + Attempting to send results [July 26 21:20:33 UTC]
[21:20:33] Core required: FahCore_a4.exe
[21:20:33] Core found.
[21:20:33] - Reading file work/wuresults_03.dat from core
[21:20:33]   (Read 560743 bytes from disk)
[21:20:33] Connecting to http://171.67.108.33:8080/
[21:20:33] Working on queue slot 09 [July 26 21:20:33 UTC]
[21:20:33] + Working ...
[21:20:33] - Calling '.\FahCore_a4.exe -dir work/ -suffix 09 -checkpoint 15 -verbose -lifeline 5176 -version 623'

[21:20:33] 
[21:20:33] *------------------------------*
[21:20:33] Folding@Home Gromacs GB Core
[21:20:33] Version 2.27 (Dec. 15, 2010)
[21:20:33] 
[21:20:33] Preparing to commence simulation
[21:20:33] - Looking at optimizations...
[21:20:33] - Files status OK
[21:20:33] - Expanded 859222 -> 1021056 (decompressed 118.8 percent)
[21:20:33] Called DecompressByteArray: compressed_data_size=859222 data_size=1021056, decompressed_data_size=1021056 diff=0
[21:20:33] - Digital signature verified
[21:20:33] 
[21:20:33] Project: 7803 (Run 1, Clone 177, Gen 1)
[21:20:33] 
[21:20:33] Assembly optimizations on if available.
[21:20:33] Entering M.D.
[21:20:39] Using Gromacs checkpoints
[21:20:39] Mapping NT from 1 to 1 
[21:20:39] Resuming from checkpoint
[21:20:39] Verified work/wudata_09.log
[21:20:39] Verified work/wudata_09.trr
[21:20:39] Verified work/wudata_09.xtc
[21:20:39] Verified work/wudata_09.edr
[21:20:39] Completed 1876930 out of 2500000 steps  (75%)
[21:20:52] - Couldn't send HTTP request to server
[21:20:52] + Could not connect to Work Server (results)
[21:20:52]     (171.67.108.33:8080)
[21:20:52] + Retrying using alternative port
[21:20:52] Connecting to http://171.67.108.33:80/
[21:21:26] - Couldn't send HTTP request to server
[21:21:26] + Could not connect to Work Server (results)
[21:21:26]     (171.67.108.33:80)
[21:21:26] - Error: Could not transmit unit 03 (completed July 17) to work server.
[21:21:26] - 50 failed uploads of this unit.
[21:21:26] - Read packet limit of 540015616... Set to 524286976.


[21:21:26] + Attempting to send results [July 26 21:21:26 UTC]
[21:21:26] - Reading file work/wuresults_03.dat from core
[21:21:26]   (Read 560743 bytes from disk)
[21:21:26] Connecting to http://171.67.108.26:8080/
[21:21:27] - Couldn't send HTTP request to server
[21:21:27] + Could not connect to Work Server (results)
[21:21:27]     (171.67.108.26:8080)
[21:21:27] + Retrying using alternative port
[21:21:27] Connecting to http://171.67.108.26:80/
[21:21:28] - Couldn't send HTTP request to server
[21:21:28] + Could not connect to Work Server (results)
[21:21:28]     (171.67.108.26:80)
[21:21:28]   Could not transmit unit 03 to Collection server; keeping in queue.
[21:21:28] Project: 6884 (Run 181, Clone 9, Gen 2)
[21:21:28] - Read packet limit of 540015616... Set to 524286976.


[21:21:28] + Attempting to send results [July 26 21:21:28 UTC]
[21:21:28] - Reading file work/wuresults_04.dat from core
[21:21:28]   (Read 561089 bytes from disk)
[21:21:28] Connecting to http://171.67.108.33:8080/
[21:21:48] - Couldn't send HTTP request to server
[21:21:48] + Could not connect to Work Server (results)
[21:21:48]     (171.67.108.33:8080)
[21:21:48] + Retrying using alternative port
[21:21:48] Connecting to http://171.67.108.33:80/
[21:22:23] - Couldn't send HTTP request to server
[21:22:23] + Could not connect to Work Server (results)
[21:22:23]     (171.67.108.33:80)
[21:22:23] - Error: Could not transmit unit 04 (completed July 17) to work server.
[21:22:23] - 44 failed uploads of this unit.
[21:22:23] - Read packet limit of 540015616... Set to 524286976.


[21:22:23] + Attempting to send results [July 26 21:22:23 UTC]
[21:22:23] - Reading file work/wuresults_04.dat from core
[21:22:23]   (Read 561089 bytes from disk)
[21:22:23] Connecting to http://171.67.108.26:8080/
[21:22:25] - Couldn't send HTTP request to server
[21:22:25] + Could not connect to Work Server (results)
[21:22:25]     (171.67.108.26:8080)
[21:22:25] + Retrying using alternative port
[21:22:25] Connecting to http://171.67.108.26:80/
[21:22:26] - Couldn't send HTTP request to server
[21:22:26] + Could not connect to Work Server (results)
[21:22:26]     (171.67.108.26:80)
[21:22:26]   Could not transmit unit 04 to Collection server; keeping in queue.
[21:22:26] Project: 6883 (Run 899, Clone 3, Gen 187)
[21:22:26] - Read packet limit of 540015616... Set to 524286976.


[21:22:26] + Attempting to send results [July 26 21:22:26 UTC]
[21:22:26] - Reading file work/wuresults_05.dat from core
[21:22:26]   (Read 561310 bytes from disk)
[21:22:26] Connecting to http://171.67.108.33:8080/
[21:22:46] - Couldn't send HTTP request to server
[21:22:46] + Could not connect to Work Server (results)
[21:22:46]     (171.67.108.33:8080)
[21:22:46] + Retrying using alternative port
[21:22:46] Connecting to http://171.67.108.33:80/
[21:24:19] - Couldn't send HTTP request to server
[21:24:19] + Could not connect to Work Server (results)
[21:24:19]     (171.67.108.33:80)
[21:24:19] - Error: Could not transmit unit 05 (completed July 18) to work server.
[21:24:19] - 38 failed uploads of this unit.
[21:24:19] - Read packet limit of 540015616... Set to 524286976.


[21:24:19] + Attempting to send results [July 26 21:24:19 UTC]
[21:24:19] - Reading file work/wuresults_05.dat from core
[21:24:19]   (Read 561310 bytes from disk)
[21:24:19] Connecting to http://171.67.108.26:8080/
[21:24:20] - Couldn't send HTTP request to server
[21:24:20] + Could not connect to Work Server (results)
[21:24:20]     (171.67.108.26:8080)
[21:24:20] + Retrying using alternative port
[21:24:20] Connecting to http://171.67.108.26:80/
[21:24:21] - Couldn't send HTTP request to server
[21:24:21] + Could not connect to Work Server (results)
[21:24:21]     (171.67.108.26:80)
[21:24:21]   Could not transmit unit 05 to Collection server; keeping in queue.
[21:24:21] Project: 6884 (Run 199, Clone 8, Gen 5)
[21:24:21] - Read packet limit of 540015616... Set to 524286976.


[21:24:21] + Attempting to send results [July 26 21:24:21 UTC]
[21:24:21] - Reading file work/wuresults_06.dat from core
[21:24:21]   (Read 578257 bytes from disk)
[21:24:21] Connecting to http://171.67.108.33:8080/
[21:24:41] - Couldn't send HTTP request to server
[21:24:41] + Could not connect to Work Server (results)
[21:24:41]     (171.67.108.33:8080)
[21:24:41] + Retrying using alternative port
[21:24:41] Connecting to http://171.67.108.33:80/

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 9:30 pm
by bruce
Please change your configuration settings. There's a size setting that can be Small/Normal/Big. Change it to Big. This won't help with the current WU but hopefully it will prevent future problems.

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 10:16 pm
by unijabnx2000
you talking about the "allow receipt of assignments and return of results greater than 10MB"?

I thought that was to allow getting WU's that require lots of memory...?

Re: 171.67.108.33 - Not uploading WU's

Posted: Tue Jul 26, 2011 10:40 pm
by 7im
Yes, that is what he is talking about.

No, that setting is the size of the WU, not memory size usage. Most WUs are normal or big these days. The setting really only applies if you're using 56kb dial-up modem.

Here is a FAH WIKI document that talks about reconfiguring the client. It does a decent job of explaining what all of the settings mean.

http://fahwiki.net/index.php/How_do_I_r ... options%3F

Re: 171.67.108.33 - Not uploading WU's

Posted: Wed Jul 27, 2011 12:49 am
by unijabnx2000
I unchecked it.

Re: 171.67.108.33 - Not uploading WU's

Posted: Wed Jul 27, 2011 12:52 am
by bruce
If the upload fails again, please go to the WORK folder and let us know the size of a file called wuresults_xx.dat, where xx is the slot number of the WU.
All times are UTC
Page 3 of 4

Powered by phpBB® Forum Software © phpBB Limited