Page 3 of 7
Re: 130.237.232.141: Could not connect to work sever
Posted: Fri Dec 17, 2010 7:07 pm
by jpeck2009
I'm still having problems uploading WU's to this server on both ports.
I CAN browse to both 130.237.232.141:8080 & 80 and receive the "OK" notice.
I'm aware that there is network repairs being done.... but the server status page says nothing is wrong with this server. I've already lost 4 bigadv wu's since 12/7 because of this and want to make sure my work is getting sent back.
Here is my log:
Code: Select all
[02:52:29] Folding@Home Gromacs SMP Core
[02:52:29] Version 2.22 (Mar 12, 2010)
[02:52:29]
[02:52:29] Preparing to commence simulation
[02:52:30] - Looking at optimizations...
[02:52:30] - Files status OK
[02:52:34] - Expanded 24865916 -> 30796293 (decompressed 123.8 percent)
[02:52:34] Called DecompressByteArray: compressed_data_size=24865916 data_size=30796293, decompressed_data_size=30796293 diff=0
[02:52:34] - Digital signature verified
[02:52:34]
[02:52:34] Project: 6900 (Run 3, Clone 1, Gen 9)
[02:52:34]
[02:52:34] Assembly optimizations on if available.
[02:52:34] Entering M.D.
[02:52:40] Using Gromacs checkpoints
[02:52:46] Resuming from checkpoint
[02:52:46] Verified work/wudata_01.log
[02:52:46] Verified work/wudata_01.trr
[02:52:47] Verified work/wudata_01.xtc
[02:52:47] Verified work/wudata_01.edr
[02:52:48] Completed 189980 out of 250000 steps (75%)
[02:53:06] Completed 190000 out of 250000 steps (76%)
[03:29:47] Completed 192500 out of 250000 steps (77%)
[04:06:32] Completed 195000 out of 250000 steps (78%)
[04:43:20] Completed 197500 out of 250000 steps (79%)
[05:20:09] Completed 200000 out of 250000 steps (80%)
[05:56:55] Completed 202500 out of 250000 steps (81%)
[06:33:21] Completed 205000 out of 250000 steps (82%)
[07:09:30] Completed 207500 out of 250000 steps (83%)
[07:45:33] Completed 210000 out of 250000 steps (84%)
[08:22:57] Completed 212500 out of 250000 steps (85%)
[09:00:16] Completed 215000 out of 250000 steps (86%)
[09:37:32] Completed 217500 out of 250000 steps (87%)
[10:14:52] Completed 220000 out of 250000 steps (88%)
[10:51:56] Completed 222500 out of 250000 steps (89%)
[11:29:02] Completed 225000 out of 250000 steps (90%)
[12:06:06] Completed 227500 out of 250000 steps (91%)
[12:42:42] Completed 230000 out of 250000 steps (92%)
[13:18:48] Completed 232500 out of 250000 steps (93%)
[13:54:55] Completed 235000 out of 250000 steps (94%)
[14:30:56] Completed 237500 out of 250000 steps (95%)
[15:06:59] Completed 240000 out of 250000 steps (96%)
[15:43:09] Completed 242500 out of 250000 steps (97%)
[16:20:21] Completed 245000 out of 250000 steps (98%)
[16:58:05] Completed 247500 out of 250000 steps (99%)
[17:35:51] Completed 250000 out of 250000 steps (100%)
[17:36:04] DynamicWrapper: Finished Work Unit: sleep=10000
[17:36:14]
[17:36:14] Finished Work Unit:
[17:36:14] - Reading up to 52713120 from "work/wudata_01.trr": Read 52713120
[17:36:15] trr file hash check passed.
[17:36:15] - Reading up to 46991732 from "work/wudata_01.xtc": Read 46991732
[17:36:15] xtc file hash check passed.
[17:36:15] edr file hash check passed.
[17:36:15] logfile size: 206516
[17:36:15] Leaving Run
[17:36:16] - Writing 100079308 bytes of core data to disk...
[17:36:17] ... Done.
[17:36:48] - Shutting down core
[17:36:48]
[17:36:48] Folding@home Core Shutdown: FINISHED_UNIT
[17:36:56] CoreStatus = 64 (100)
[17:36:56] Sending work to server
[17:36:56] Project: 6900 (Run 3, Clone 1, Gen 9)
[17:36:56] + Attempting to send results [December 17 17:36:56 UTC]
[17:44:25] - Couldn't send HTTP request to server
[17:44:25] + Could not connect to Work Server (results)
[17:44:25] (130.237.232.141:8080)
[17:44:25] + Retrying using alternative port
[17:51:57] - Couldn't send HTTP request to server
[17:51:57] + Could not connect to Work Server (results)
[17:51:57] (130.237.232.141:80)
[17:51:57] - Error: Could not transmit unit 01 (completed December 17) to work server.
[17:51:57] Keeping unit 01 in queue.
[17:51:57] Project: 6900 (Run 3, Clone 1, Gen 9)
[17:51:57] + Attempting to send results [December 17 17:51:57 UTC]
[17:59:32] - Couldn't send HTTP request to server
[17:59:32] + Could not connect to Work Server (results)
[17:59:32] (130.237.232.141:8080)
[17:59:32] + Retrying using alternative port
[18:12:32] - Couldn't send HTTP request to server
[18:12:32] + Could not connect to Work Server (results)
[18:12:32] (130.237.232.141:80)
[18:12:32] - Error: Could not transmit unit 01 (completed December 17) to work server.
[18:12:32] + Attempting to send results [December 17 18:12:32 UTC]
[18:12:33] - Couldn't send HTTP request to server
[18:12:33] + Could not connect to Work Server (results)
[18:12:33] (130.237.165.141:8080)
[18:12:33] + Retrying using alternative port
[18:12:34] - Couldn't send HTTP request to server
[18:12:34] + Could not connect to Work Server (results)
[18:12:34] (130.237.165.141:80)
[18:12:34] Could not transmit unit 01 to Collection server; keeping in queue.
[18:12:34] - Preparing to get new work unit...
[18:12:34] Cleaning up work directory
[18:12:34] + Attempting to get work packet
[18:12:34] Passkey found
[18:12:34] - Connecting to assignment server
[18:12:36] - Successful: assigned to (171.67.108.22).
[18:12:36] + News From Folding@Home: Welcome to Folding@Home
[18:12:36] Loaded queue successfully.
Re: 130.237.232.141: Could not connect to work sever
Posted: Fri Dec 17, 2010 7:18 pm
by bruce
Unless you get the messages shown in the log at the top of this topic saying "Thank you..." you work is not getting sent back . . . it's queued for update and the client will keep trying periodically.
I can't tell if the problem is on your end or on the server's end. If it's on your end, you can look for anti-spyware software (perhaps part of your anti-virus suite, perhaps in an add-on firewall) that might be blocking the client from connecting to that server.
Re: 130.237.232.141: Could not connect to work sever
Posted: Fri Dec 17, 2010 9:05 pm
by jpeck2009
Bruce, the machine has no anti-virus or add on firewall that would be blocking the connection. I've had two other machines today submit bigadv wu's successfully, so I know my network is not the problem. I also have two GPU clients on this machine that is not having any issues submitting wu's.
Is there any other way to test why the CPU client is having issues connecting?
Re: 130.237.232.141: Could not connect to work sever
Posted: Fri Dec 17, 2010 9:43 pm
by bruce
I notified the owner of the server. From the information I can see, it's not clear where the problem may lie.
Re: 130.237.232.141: Could not connect to work sever
Posted: Fri Dec 17, 2010 10:08 pm
by jpeck2009
Thanks!
Edit: Another one of my machines just pulled a new WU from this server. So I know I can connect to it and DL new work. The problem is just sending the work back to you. In case it matters, I pulled P6900(R20,C13,G12).
In case this might be needed here is another log using the send tag with verbosity 9:
Code: Select all
# Windows CPU Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.30
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\FOLDING\FAH_CPU
Executable: fah6
Arguments: -send all -verbosity 9
[21:30:06] - Ask before connecting: No
[21:30:06] - User name: jpeck2009 (Team 111065)
[21:30:06] - User ID: 47EFCAA9718CFE4B
[21:30:06] - Machine ID: 1
[21:30:06]
[21:30:07] Loaded queue successfully.
[21:30:07] Attempting to return result(s) to server...
[21:30:07] Trying to send all finished work units
[21:30:07] Project: 6900 (Run 3, Clone 1, Gen 9)
[21:30:07] - Read packet limit of 540015616... Set to 524286976.
[21:30:07] + Attempting to send results [December 17 21:30:07 UTC]
[21:30:07] - Reading file work/wuresults_01.dat from core
[21:30:07] (Read 100079308 bytes from disk)
[21:30:07] Connecting to http://130.237.232.141:8080/
[21:36:53] - Couldn't send HTTP request to server
[21:36:53] + Could not connect to Work Server (results)
[21:36:53] (130.237.232.141:8080)
[21:36:53] + Retrying using alternative port
[21:36:53] Connecting to http://130.237.232.141:80/
[21:42:24] - Couldn't send HTTP request to server
[21:42:24] + Could not connect to Work Server (results)
[21:42:24] (130.237.232.141:80)
[21:42:24] - Error: Could not transmit unit 01 (completed December 17) to work s
erver.
[21:42:24] - 6 failed uploads of this unit.
[21:42:24] - Read packet limit of 540015616... Set to 524286976.
[21:42:24] + Attempting to send results [December 17 21:42:24 UTC]
[21:42:24] - Reading file work/wuresults_01.dat from core
[21:42:24] (Read 100079308 bytes from disk)
[21:42:24] Connecting to http://130.237.165.141:8080/
[21:42:24] - Couldn't send HTTP request to server
[21:42:24] + Could not connect to Work Server (results)
[21:42:24] (130.237.165.141:8080)
[21:42:24] + Retrying using alternative port
[21:42:24] Connecting to http://130.237.165.141:80/
[21:42:25] - Couldn't send HTTP request to server
[21:42:25] + Could not connect to Work Server (results)
[21:42:25] (130.237.165.141:80)
[21:42:25] Could not transmit unit 01 to Collection server; keeping in queue.
[21:42:25] + Sent 0 of 1 completed units to the server
[21:42:25] - Failed to send all units to server
[21:42:25] ***** Got a SIGTERM signal (2)
[21:42:25] Killing all core threads
Folding@Home Client Shutdown.
Re: 130.237.232.141: Could not connect to work sever
Posted: Fri Dec 17, 2010 11:22 pm
by bruce
I'll bet your client is configured for Normal size WUs rather than for Big ones.
Re: 130.237.232.141: Could not connect to work sever
Posted: Fri Dec 17, 2010 11:41 pm
by jpeck2009
I wish that was the cause... but it is setup for Big.
Code: Select all
C:\Users\FOLDING\FAH_CPU>fah6 -configonly
Note: Please read the license agreement (fah6 -license). Further
use of this software requires that you have read and accepted this agreement.
Folding@Home User Configuration
--- Opening Log file [December 17 23:36:52 UTC]
# Windows CPU Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.30
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\FOLDING\FAH_CPU
Executable: fah6
Arguments: -configonly
[23:36:52] - Ask before connecting: No
[23:36:52] - User name: jpeck2009 (Team 111065)
[23:36:52] - User ID: 47EFCAA9718CFE4B
[23:36:52] - Machine ID: 1
[23:36:52]
[23:36:52] Configuring Folding@Home...
User name [jpeck2009]?
Team Number [111065]?
Passkey [3c370425f4a1fb08c36461c9ca2c3a23]?
Ask before fetching/sending work (no/yes) [no]?
Use proxy (yes/no) [no]?
Acceptable size of work assignment and work result packets (bigger units
may have large memory demands) -- 'small' is <5MB, 'normal' is <10MB, and
'big' is >10MB (small/normal/big) [big]? BIG
Change advanced options (yes/no) [no]? yes
Core Priority (idle/low) [idle]?
CPU usage requested (5-100) [100]?
Disable highly optimized assembly code (no/yes) [no]?
Pause if battery power is being used (useful for laptops) (no/yes) [no]?
Interval, in minutes, between checkpoints (3-30) [15]?
Memory, in MB, to indicate (6135 available) [6135]?
Set -advmethods flag always, requesting new advanced
scientific cores and/or work units if available (no/yes) [no]?
Ignore any deadline information (mainly useful if
system clock frequently has errors) (no/yes) [no]?
Machine ID (1-16) [1]?
Launch automatically, install as a service in this directory (yes/no) [no]?
The following options require you to restart the client before they take effect
Disable CPU affinity lock (no/yes) [no]?
Additional client parameters []?
IP address to bind core to (for viewer). Use space to clear []?
[23:40:50] - Ask before connecting: No
[23:40:50] - User name: jpeck2009 (Team 111065)
[23:40:50] - User ID: 47EFCAA9718CFE4B
[23:40:50] - Machine ID: 1
[23:40:50]
[23:40:50] -configonly flag given, so exiting.
C:\Users\FOLDING\FAH_CPU>
130.237.232.141 (P6900 unable to upload)
Posted: Tue Jan 11, 2011 11:29 am
by Howdy2u2
I have not been able to upload ANY P6900 WUs, I can although upload "regular" SMPs and P2684 WUs. Is it on my end ? or is the WU server overwhelmed by all of these? I have as you will see stopped the client and restarted it in an attempt to get it to send the WU. I am also including a log file for the P6900 and a completed P2684.
P6900:
Code: Select all
--- Opening Log file [January 8 06:15:21 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.30
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\FAH Tracker\FAH GPU Tracker V2\SMP
Executable: C:\FAH Tracker\FAH GPU Tracker V2\FAH.exe
Arguments: -oneunit -forceasm -smp -bigadv -verbosity 9
[06:15:21] - Ask before connecting: No
[06:15:21] - User name: Howdy2u2 (Team 111065)
[06:15:21] - User ID: ****************
[06:15:21] - Machine ID: 2
[06:15:21]
[06:15:21] Work directory not found. Creating...
[06:15:21] Could not open work queue, generating new queue...
[06:15:21] - Preparing to get new work unit...
[06:15:21] - Autosending finished units... [January 8 06:15:21 UTC]
[06:15:21] Cleaning up work directory
[06:15:21] Trying to send all finished work units
[06:15:21] + No unsent completed units remaining.
[06:15:21] - Autosend completed
[06:15:21] + Attempting to get work packet
[06:15:21] Passkey found
[06:15:21] - Will indicate memory of 4087 MB
[06:15:21] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 14, Stepping: 5
[06:15:21] - Connecting to assignment server
[06:15:21] Connecting to http://assign.stanford.edu:8080/
[06:15:22] Posted data.
[06:15:22] Initial: ED82; - Successful: assigned to (130.237.232.141).
[06:15:22] + News From Folding@Home: Welcome to Folding@Home
[06:15:22] Loaded queue successfully.
[06:15:22] Sent data
[06:15:22] Connecting to http://130.237.232.141:8080/
[06:15:28] Posted data.
[06:15:28] Initial: 0000; - Receiving payload (expected size: 24872476)
[06:17:09] - Downloaded at ~240 kB/s
[06:17:09] - Averaged speed for that direction ~240 kB/s
[06:17:09] + Received work.
[06:17:09] + Closed connections
[06:17:09]
[06:17:09] + Processing work unit
[06:17:09] Core required: FahCore_a3.exe
[06:17:09] Core found.
[06:17:09] Working on queue slot 01 [January 8 06:17:09 UTC]
[06:17:09] + Working ...
[06:17:09] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 01 -np 8 -nocpulock -checkpoint 3 -forceasm -verbose -lifeline 3940 -version 630'
[06:17:09]
[06:17:09] *------------------------------*
[06:17:09] Folding@Home Gromacs SMP Core
[06:17:09] Version 2.22 (Mar 12, 2010)
[06:17:09]
[06:17:09] Preparing to commence simulation
[06:17:09] - Assembly optimizations manually forced on.
[06:17:09] - Not checking prior termination.
[06:17:14] - Expanded 24871964 -> 30796293 (decompressed 123.8 percent)
[06:17:14] Called DecompressByteArray: compressed_data_size=24871964 data_size=30796293, decompressed_data_size=30796293 diff=0
[06:17:14] - Digital signature verified
[06:17:14]
[06:17:14] Project: 6900 (Run 10, Clone 20, Gen 15)
[06:17:14]
[06:17:16] Assembly optimizations on if available.
[06:17:16] Entering M.D.
[06:17:25] Completed 0 out of 250000 steps (0%)
[06:56:24] Completed 2500 out of 250000 steps (1%)
[07:35:05] Completed 5000 out of 250000 steps (2%)
[08:13:43] Completed 7500 out of 250000 steps (3%)
[08:52:18] Completed 10000 out of 250000 steps (4%)
[09:30:59] Completed 12500 out of 250000 steps (5%)
[10:09:39] Completed 15000 out of 250000 steps (6%)
[10:48:19] Completed 17500 out of 250000 steps (7%)
[11:27:02] Completed 20000 out of 250000 steps (8%)
[12:05:36] Completed 22500 out of 250000 steps (9%)
[12:15:21] - Autosending finished units... [January 8 12:15:21 UTC]
[12:15:21] Trying to send all finished work units
[12:15:21] + No unsent completed units remaining.
[12:15:21] - Autosend completed
[12:44:12] Completed 25000 out of 250000 steps (10%)
[13:22:52] Completed 27500 out of 250000 steps (11%)
[14:01:28] Completed 30000 out of 250000 steps (12%)
[14:40:13] Completed 32500 out of 250000 steps (13%)
[15:18:46] Completed 35000 out of 250000 steps (14%)
[15:57:51] Completed 37500 out of 250000 steps (15%)
[16:36:30] Completed 40000 out of 250000 steps (16%)
[17:15:10] Completed 42500 out of 250000 steps (17%)
[17:53:47] Completed 45000 out of 250000 steps (18%)
[18:15:21] - Autosending finished units... [January 8 18:15:21 UTC]
[18:15:21] Trying to send all finished work units
[18:15:21] + No unsent completed units remaining.
[18:15:21] - Autosend completed
[18:32:25] Completed 47500 out of 250000 steps (19%)
[19:11:02] Completed 50000 out of 250000 steps (20%)
[19:49:43] Completed 52500 out of 250000 steps (21%)
[20:28:26] Completed 55000 out of 250000 steps (22%)
[21:07:04] Completed 57500 out of 250000 steps (23%)
[21:45:44] Completed 60000 out of 250000 steps (24%)
[22:24:26] Completed 62500 out of 250000 steps (25%)
[23:03:08] Completed 65000 out of 250000 steps (26%)
[23:41:53] Completed 67500 out of 250000 steps (27%)
[00:15:21] - Autosending finished units... [January 9 00:15:21 UTC]
[00:15:21] Trying to send all finished work units
[00:15:21] + No unsent completed units remaining.
[00:15:21] - Autosend completed
[00:20:26] Completed 70000 out of 250000 steps (28%)
[00:59:08] Completed 72500 out of 250000 steps (29%)
[01:37:56] Completed 75000 out of 250000 steps (30%)
[02:16:34] Completed 77500 out of 250000 steps (31%)
[02:55:14] Completed 80000 out of 250000 steps (32%)
[03:34:02] Completed 82500 out of 250000 steps (33%)
[04:12:40] Completed 85000 out of 250000 steps (34%)
[04:50:22] Completed 87500 out of 250000 steps (35%)
[05:28:55] Completed 90000 out of 250000 steps (36%)
[06:07:48] Completed 92500 out of 250000 steps (37%)
[06:14:20] - Autosending finished units... [January 9 06:14:20 UTC]
[06:14:20] Trying to send all finished work units
[06:14:20] + No unsent completed units remaining.
[06:14:20] - Autosend completed
[06:46:39] Completed 95000 out of 250000 steps (38%)
[07:25:29] Completed 97500 out of 250000 steps (39%)
[08:04:16] Completed 100000 out of 250000 steps (40%)
[08:43:38] Completed 102500 out of 250000 steps (41%)
[09:22:13] Completed 105000 out of 250000 steps (42%)
[10:00:48] Completed 107500 out of 250000 steps (43%)
[10:39:22] Completed 110000 out of 250000 steps (44%)
[11:18:02] Completed 112500 out of 250000 steps (45%)
[11:56:42] Completed 115000 out of 250000 steps (46%)
[12:14:22] - Autosending finished units... [January 9 12:14:22 UTC]
[12:14:22] Trying to send all finished work units
[12:14:22] + No unsent completed units remaining.
[12:14:22] - Autosend completed
[12:35:18] Completed 117500 out of 250000 steps (47%)
[13:14:02] Completed 120000 out of 250000 steps (48%)
[13:52:42] Completed 122500 out of 250000 steps (49%)
[14:31:31] Completed 125000 out of 250000 steps (50%)
[15:10:15] Completed 127500 out of 250000 steps (51%)
[15:49:25] Completed 130000 out of 250000 steps (52%)
[16:27:58] Completed 132500 out of 250000 steps (53%)
[17:06:40] Completed 135000 out of 250000 steps (54%)
[17:45:21] Completed 137500 out of 250000 steps (55%)
[18:14:22] - Autosending finished units... [January 9 18:14:22 UTC]
[18:14:22] Trying to send all finished work units
[18:14:22] + No unsent completed units remaining.
[18:14:22] - Autosend completed
[18:24:06] Completed 140000 out of 250000 steps (56%)
[19:02:43] Completed 142500 out of 250000 steps (57%)
[19:41:13] Completed 145000 out of 250000 steps (58%)
[20:19:59] Completed 147500 out of 250000 steps (59%)
[20:58:43] Completed 150000 out of 250000 steps (60%)
[21:37:29] Completed 152500 out of 250000 steps (61%)
[22:16:12] Completed 155000 out of 250000 steps (62%)
[22:54:59] Completed 157500 out of 250000 steps (63%)
[23:33:40] Completed 160000 out of 250000 steps (64%)
[00:12:20] Completed 162500 out of 250000 steps (65%)
[00:14:22] - Autosending finished units... [January 10 00:14:22 UTC]
[00:14:22] Trying to send all finished work units
[00:14:22] + No unsent completed units remaining.
[00:14:22] - Autosend completed
[00:51:06] Completed 165000 out of 250000 steps (66%)
[01:29:47] Completed 167500 out of 250000 steps (67%)
[02:08:35] Completed 170000 out of 250000 steps (68%)
[02:47:14] Completed 172500 out of 250000 steps (69%)
[03:26:04] Completed 175000 out of 250000 steps (70%)
[04:04:52] Completed 177500 out of 250000 steps (71%)
[04:43:37] Completed 180000 out of 250000 steps (72%)
[05:22:24] Completed 182500 out of 250000 steps (73%)
[06:01:17] Completed 185000 out of 250000 steps (74%)
[06:14:22] - Autosending finished units... [January 10 06:14:22 UTC]
[06:14:22] Trying to send all finished work units
[06:14:22] + No unsent completed units remaining.
[06:14:22] - Autosend completed
[06:40:05] Completed 187500 out of 250000 steps (75%)
[07:18:46] Completed 190000 out of 250000 steps (76%)
[07:57:34] Completed 192500 out of 250000 steps (77%)
[08:36:19] Completed 195000 out of 250000 steps (78%)
[09:15:02] Completed 197500 out of 250000 steps (79%)
[09:53:40] Completed 200000 out of 250000 steps (80%)
[10:32:23] Completed 202500 out of 250000 steps (81%)
[11:11:04] Completed 205000 out of 250000 steps (82%)
[11:49:53] Completed 207500 out of 250000 steps (83%)
[12:14:22] - Autosending finished units... [January 10 12:14:22 UTC]
[12:14:22] Trying to send all finished work units
[12:14:22] + No unsent completed units remaining.
[12:14:22] - Autosend completed
[12:28:40] Completed 210000 out of 250000 steps (84%)
[13:07:29] Completed 212500 out of 250000 steps (85%)
[13:46:12] Completed 215000 out of 250000 steps (86%)
[14:23:58] Completed 217500 out of 250000 steps (87%)
[15:02:44] Completed 220000 out of 250000 steps (88%)
[15:41:58] Completed 222500 out of 250000 steps (89%)
[16:20:40] Completed 225000 out of 250000 steps (90%)
[16:59:15] Completed 227500 out of 250000 steps (91%)
[17:38:03] Completed 230000 out of 250000 steps (92%)
[18:13:21] - Autosending finished units... [January 10 18:13:21 UTC]
[18:13:21] Trying to send all finished work units
[18:13:21] + No unsent completed units remaining.
[18:13:21] - Autosend completed
[18:16:44] Completed 232500 out of 250000 steps (93%)
[18:55:29] Completed 235000 out of 250000 steps (94%)
[19:34:10] Completed 237500 out of 250000 steps (95%)
[20:12:51] Completed 240000 out of 250000 steps (96%)
[20:51:27] Completed 242500 out of 250000 steps (97%)
[21:30:12] Completed 245000 out of 250000 steps (98%)
[22:08:53] Completed 247500 out of 250000 steps (99%)
[22:47:36] Completed 250000 out of 250000 steps (100%)
[22:47:51] DynamicWrapper: Finished Work Unit: sleep=10000
[22:48:01]
[22:48:01] Finished Work Unit:
[22:48:01] - Reading up to 52713120 from "work/wudata_01.trr": Read 52713120
[22:48:02] trr file hash check passed.
[22:48:02] - Reading up to 47027280 from "work/wudata_01.xtc": Read 47027280
[22:48:02] xtc file hash check passed.
[22:48:02] edr file hash check passed.
[22:48:02] logfile size: 274924
[22:48:02] Leaving Run
[22:48:05] - Writing 100183264 bytes of core data to disk...
[22:48:08] ... Done.
[22:48:43] - Shutting down core
[22:48:43]
[22:48:43] Folding@home Core Shutdown: FINISHED_UNIT
[22:48:53] CoreStatus = 64 (100)
[22:48:53] Unit 1 finished with 55 percent of time to deadline remaining.
[22:48:53] Updated performance fraction: 0.551883
[22:48:53] Sending work to server
[22:48:53] Project: 6900 (Run 10, Clone 20, Gen 15)
[22:48:53] + Attempting to send results [January 10 22:48:53 UTC]
[22:48:53] - Reading file work/wuresults_01.dat from core
[22:48:53] (Read 100183264 bytes from disk)
[22:48:53] Connecting to http://130.237.232.141:8080/
[22:53:02] - Couldn't send HTTP request to server
[22:53:02] + Could not connect to Work Server (results)
[22:53:02] (130.237.232.141:8080)
[22:53:02] + Retrying using alternative port
[22:53:02] Connecting to http://130.237.232.141:80/
[22:57:43] - Couldn't send HTTP request to server
[22:57:43] + Could not connect to Work Server (results)
[22:57:43] (130.237.232.141:80)
[22:57:43] - Error: Could not transmit unit 01 (completed January 10) to work server.
[22:57:43] - 1 failed uploads of this unit.
[22:57:43] Keeping unit 01 in queue.
[22:57:43] Trying to send all finished work units
[22:57:43] Project: 6900 (Run 10, Clone 20, Gen 15)
[22:57:43] + Attempting to send results [January 10 22:57:43 UTC]
[22:57:43] - Reading file work/wuresults_01.dat from core
[22:57:43] (Read 100183264 bytes from disk)
[22:57:43] Connecting to http://130.237.232.141:8080/
[23:06:27] - Couldn't send HTTP request to server
[23:06:27] + Could not connect to Work Server (results)
[23:06:27] (130.237.232.141:8080)
[23:06:27] + Retrying using alternative port
[23:06:27] Connecting to http://130.237.232.141:80/
[23:10:36] - Couldn't send HTTP request to server
[23:10:36] + Could not connect to Work Server (results)
[23:10:36] (130.237.232.141:80)
[23:10:36] - Error: Could not transmit unit 01 (completed January 10) to work server.
[23:10:36] - 2 failed uploads of this unit.
[23:10:36] + Attempting to send results [January 10 23:10:36 UTC]
[23:10:36] - Reading file work/wuresults_01.dat from core
[23:10:37] (Read 100183264 bytes from disk)
[23:10:37] Connecting to http://130.237.165.141:8080/
[23:10:37] - Couldn't send HTTP request to server
[23:10:37] + Could not connect to Work Server (results)
[23:10:37] (130.237.165.141:8080)
[23:10:37] + Retrying using alternative port
[23:10:37] Connecting to http://130.237.165.141:80/
[23:10:37] - Couldn't send HTTP request to server
[23:10:37] + Could not connect to Work Server (results)
[23:10:37] (130.237.165.141:80)
[23:10:37] Could not transmit unit 01 to Collection server; keeping in queue.
[23:10:37] + Sent 0 of 1 completed units to the server
[23:11:07] Trying to send all finished work units
[23:11:07] Project: 6900 (Run 10, Clone 20, Gen 15)
[23:11:07] + Attempting to send results [January 10 23:11:07 UTC]
[23:11:07] - Reading file work/wuresults_01.dat from core
[23:11:07] (Read 100183264 bytes from disk)
[23:11:07] Connecting to http://130.237.232.141:8080/
[23:21:03] - Couldn't send HTTP request to server
[23:21:03] + Could not connect to Work Server (results)
[23:21:03] (130.237.232.141:8080)
[23:21:03] + Retrying using alternative port
[23:21:03] Connecting to http://130.237.232.141:80/
[23:31:37] - Couldn't send HTTP request to server
[23:31:37] + Could not connect to Work Server (results)
[23:31:37] (130.237.232.141:80)
[23:31:37] - Error: Could not transmit unit 01 (completed January 10) to work server.
[23:31:37] - 3 failed uploads of this unit.
[23:31:37] + Attempting to send results [January 10 23:31:37 UTC]
[23:31:37] - Reading file work/wuresults_01.dat from core
[23:31:38] (Read 100183264 bytes from disk)
[23:31:38] Connecting to http://130.237.165.141:8080/
[23:31:38] - Couldn't send HTTP request to server
[23:31:38] + Could not connect to Work Server (results)
[23:31:38] (130.237.165.141:8080)
[23:31:38] + Retrying using alternative port
[23:31:38] Connecting to http://130.237.165.141:80/
[23:31:38] - Couldn't send HTTP request to server
[23:31:38] + Could not connect to Work Server (results)
[23:31:38] (130.237.165.141:80)
[23:31:38] Could not transmit unit 01 to Collection server; keeping in queue.
[23:31:38] + Sent 0 of 1 completed units to the server
[23:32:08] Trying to send all finished work units
[23:32:08] Project: 6900 (Run 10, Clone 20, Gen 15)
[23:32:08] + Attempting to send results [January 10 23:32:08 UTC]
[23:32:08] - Reading file work/wuresults_01.dat from core
[23:32:08] (Read 100183264 bytes from disk)
[23:32:08] Connecting to http://130.237.232.141:8080/
[23:37:03] - Couldn't send HTTP request to server
[23:37:03] + Could not connect to Work Server (results)
[23:37:03] (130.237.232.141:8080)
[23:37:03] + Retrying using alternative port
[23:37:03] Connecting to http://130.237.232.141:80/
[23:42:08] - Couldn't send HTTP request to server
[23:42:08] + Could not connect to Work Server (results)
[23:42:08] (130.237.232.141:80)
[23:42:08] - Error: Could not transmit unit 01 (completed January 10) to work server.
[23:42:08] - 4 failed uploads of this unit.
[23:42:08] + Attempting to send results [January 10 23:42:08 UTC]
[23:42:08] - Reading file work/wuresults_01.dat from core
[23:42:08] (Read 100183264 bytes from disk)
[23:42:08] Connecting to http://130.237.165.141:8080/
[23:42:09] - Couldn't send HTTP request to server
[23:42:09] + Could not connect to Work Server (results)
[23:42:09] (130.237.165.141:8080)
[23:42:09] + Retrying using alternative port
[23:42:09] Connecting to http://130.237.165.141:80/
[23:42:09] - Couldn't send HTTP request to server
[23:42:09] + Could not connect to Work Server (results)
[23:42:09] (130.237.165.141:80)
[23:42:09] Could not transmit unit 01 to Collection server; keeping in queue.
[23:42:09] + Sent 0 of 1 completed units to the server
[23:42:39] Trying to send all finished work units
[23:42:39] Project: 6900 (Run 10, Clone 20, Gen 15)
[23:42:39] + Attempting to send results [January 10 23:42:39 UTC]
[23:42:39] - Reading file work/wuresults_01.dat from core
[23:42:39] (Read 100183264 bytes from disk)
[23:42:39] Connecting to http://130.237.232.141:8080/
[23:46:26] - Couldn't send HTTP request to server
[23:46:26] + Could not connect to Work Server (results)
[23:46:26] (130.237.232.141:8080)
[23:46:26] + Retrying using alternative port
[23:46:26] Connecting to http://130.237.232.141:80/
[23:51:10] - Couldn't send HTTP request to server
[23:51:10] + Could not connect to Work Server (results)
[23:51:10] (130.237.232.141:80)
[23:51:10] - Error: Could not transmit unit 01 (completed January 10) to work server.
[23:51:10] - 5 failed uploads of this unit.
[23:51:10] + Attempting to send results [January 10 23:51:10 UTC]
[23:51:10] - Reading file work/wuresults_01.dat from core
[23:51:11] (Read 100183264 bytes from disk)
[23:51:11] Connecting to http://130.237.165.141:8080/
[23:51:11] - Couldn't send HTTP request to server
[23:51:11] + Could not connect to Work Server (results)
[23:51:11] (130.237.165.141:8080)
[23:51:11] + Retrying using alternative port
[23:51:11] Connecting to http://130.237.165.141:80/
[23:51:11] - Couldn't send HTTP request to server
[23:51:11] + Could not connect to Work Server (results)
[23:51:11] (130.237.165.141:80)
[23:51:11] Could not transmit unit 01 to Collection server; keeping in queue.
[23:51:11] + Sent 0 of 1 completed units to the server
[23:51:41] Trying to send all finished work units
[23:51:41] Project: 6900 (Run 10, Clone 20, Gen 15)
[23:51:41] + Attempting to send results [January 10 23:51:41 UTC]
[23:51:41] - Reading file work/wuresults_01.dat from core
[23:51:41] (Read 100183264 bytes from disk)
[23:51:41] Connecting to http://130.237.232.141:8080/
[00:03:10] - Couldn't send HTTP request to server
[00:03:10] + Could not connect to Work Server (results)
[00:03:10] (130.237.232.141:8080)
[00:03:10] + Retrying using alternative port
[00:03:10] Connecting to http://130.237.232.141:80/
[00:06:41] - Couldn't send HTTP request to server
[00:06:41] + Could not connect to Work Server (results)
[00:06:41] (130.237.232.141:80)
[00:06:41] - Error: Could not transmit unit 01 (completed January 10) to work server.
[00:06:41] - 6 failed uploads of this unit.
[00:06:41] + Attempting to send results [January 11 00:06:41 UTC]
[00:06:41] - Reading file work/wuresults_01.dat from core
[00:06:41] (Read 100183264 bytes from disk)
[00:06:41] Connecting to http://130.237.165.141:8080/
[00:06:41] - Couldn't send HTTP request to server
[00:06:41] + Could not connect to Work Server (results)
[00:06:41] (130.237.165.141:8080)
[00:06:41] + Retrying using alternative port
[00:06:41] Connecting to http://130.237.165.141:80/
[00:06:41] - Couldn't send HTTP request to server
[00:06:41] + Could not connect to Work Server (results)
[00:06:41] (130.237.165.141:80)
[00:06:41] Could not transmit unit 01 to Collection server; keeping in queue.
[00:06:41] + Sent 0 of 1 completed units to the server
[00:07:11] Trying to send all finished work units
[00:07:11] Project: 6900 (Run 10, Clone 20, Gen 15)
[00:07:11] + Attempting to send results [January 11 00:07:11 UTC]
[00:07:11] - Reading file work/wuresults_01.dat from core
[00:07:11] (Read 100183264 bytes from disk)
[00:07:11] Connecting to http://130.237.232.141:8080/
[00:10:45] - Couldn't send HTTP request to server
[00:10:45] + Could not connect to Work Server (results)
[00:10:45] (130.237.232.141:8080)
[00:10:45] + Retrying using alternative port
[00:10:45] Connecting to http://130.237.232.141:80/
[00:13:21] - Autosending finished units... [January 11 00:13:21 UTC]
[00:13:21] Trying to send all finished work units
[00:13:21] - Already sending work
[00:13:21] + Sent 0 of 1 completed units to the server
[00:13:21] - Autosend completed
[00:14:10] - Couldn't send HTTP request to server
[00:14:10] + Could not connect to Work Server (results)
[00:14:10] (130.237.232.141:80)
[00:14:10] - Error: Could not transmit unit 01 (completed January 10) to work server.
[00:14:10] - 7 failed uploads of this unit.
[00:14:10] + Attempting to send results [January 11 00:14:10 UTC]
[00:14:10] - Reading file work/wuresults_01.dat from core
[00:14:10] (Read 100183264 bytes from disk)
[00:14:10] Connecting to http://130.237.165.141:8080/
[00:14:11] - Couldn't send HTTP request to server
[00:14:11] + Could not connect to Work Server (results)
[00:14:11] (130.237.165.141:8080)
[00:14:11] + Retrying using alternative port
[00:14:11] Connecting to http://130.237.165.141:80/
[00:14:11] - Couldn't send HTTP request to server
[00:14:11] + Could not connect to Work Server (results)
[00:14:11] (130.237.165.141:80)
[00:14:11] Could not transmit unit 01 to Collection server; keeping in queue.
[00:14:11] + Sent 0 of 1 completed units to the server
[00:14:41] Trying to send all finished work units
[00:14:41] Project: 6900 (Run 10, Clone 20, Gen 15)
[00:14:41] + Attempting to send results [January 11 00:14:41 UTC]
[00:14:41] - Reading file work/wuresults_01.dat from core
[00:14:41] (Read 100183264 bytes from disk)
[00:14:41] Connecting to http://130.237.232.141:8080/
[00:23:54] - Couldn't send HTTP request to server
[00:23:54] + Could not connect to Work Server (results)
[00:23:54] (130.237.232.141:8080)
[00:23:54] + Retrying using alternative port
[00:23:54] Connecting to http://130.237.232.141:80/
[00:27:12] - Couldn't send HTTP request to server
[00:27:12] + Could not connect to Work Server (results)
[00:27:12] (130.237.232.141:80)
[00:27:12] - Error: Could not transmit unit 01 (completed January 10) to work server.
[00:27:12] - 8 failed uploads of this unit.
[00:27:12] + Attempting to send results [January 11 00:27:12 UTC]
[00:27:12] - Reading file work/wuresults_01.dat from core
[00:27:12] (Read 100183264 bytes from disk)
[00:27:12] Connecting to http://130.237.165.141:8080/
[00:27:12] - Couldn't send HTTP request to server
[00:27:12] + Could not connect to Work Server (results)
[00:27:12] (130.237.165.141:8080)
[00:27:12] + Retrying using alternative port
[00:27:12] Connecting to http://130.237.165.141:80/
[00:27:12] - Couldn't send HTTP request to server
[00:27:12] + Could not connect to Work Server (results)
[00:27:12] (130.237.165.141:80)
[00:27:12] Could not transmit unit 01 to Collection server; keeping in queue.
[00:27:12] + Sent 0 of 1 completed units to the server
[00:27:42] Trying to send all finished work units
[00:27:42] Project: 6900 (Run 10, Clone 20, Gen 15)
[00:27:42] + Attempting to send results [January 11 00:27:42 UTC]
[00:27:42] - Reading file work/wuresults_01.dat from core
[00:27:42] (Read 100183264 bytes from disk)
[00:27:42] Connecting to http://130.237.232.141:8080/
[00:31:27] - Couldn't send HTTP request to server
[00:31:27] + Could not connect to Work Server (results)
[00:31:27] (130.237.232.141:8080)
[00:31:27] + Retrying using alternative port
[00:31:27] Connecting to http://130.237.232.141:80/
[00:34:37] - Couldn't send HTTP request to server
[00:34:37] + Could not connect to Work Server (results)
[00:34:37] (130.237.232.141:80)
[00:34:37] - Error: Could not transmit unit 01 (completed January 10) to work server.
[00:34:37] - 9 failed uploads of this unit.
[00:34:37] + Attempting to send results [January 11 00:34:37 UTC]
[00:34:37] - Reading file work/wuresults_01.dat from core
[00:34:38] (Read 100183264 bytes from disk)
[00:34:38] Connecting to http://130.237.165.141:8080/
[00:34:38] - Couldn't send HTTP request to server
[00:34:38] + Could not connect to Work Server (results)
[00:34:38] (130.237.165.141:8080)
[00:34:38] + Retrying using alternative port
[00:34:38] Connecting to http://130.237.165.141:80/
[00:34:38] - Couldn't send HTTP request to server
[00:34:38] + Could not connect to Work Server (results)
[00:34:38] (130.237.165.141:80)
[00:34:38] Could not transmit unit 01 to Collection server; keeping in queue.
[00:34:38] + Sent 0 of 1 completed units to the server
[00:35:08] Trying to send all finished work units
[00:35:08] Project: 6900 (Run 10, Clone 20, Gen 15)
[00:35:08] + Attempting to send results [January 11 00:35:08 UTC]
[00:35:08] - Reading file work/wuresults_01.dat from core
[00:35:08] (Read 100183264 bytes from disk)
[00:35:08] Connecting to http://130.237.232.141:8080/
[00:38:43] - Couldn't send HTTP request to server
[00:38:43] + Could not connect to Work Server (results)
[00:38:43] (130.237.232.141:8080)
[00:38:43] + Retrying using alternative port
[00:38:43] Connecting to http://130.237.232.141:80/
[00:41:01] Killing all core threads
[00:41:01] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown at user request.
[00:41:01] ***** Got a SIGTERM signal (2)
[00:41:01] Killing all core threads
[00:41:01] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown.
--- Opening Log file [January 11 00:41:10 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.30
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\FAH Tracker\FAH GPU Tracker V2\SMP
Executable: C:\FAH Tracker\FAH GPU Tracker V2\FAH.exe
Arguments: -oneunit -forceasm -smp -bigadv -verbosity 9
[00:41:10] - Ask before connecting: No
[00:41:10] - User name: Howdy2u2 (Team 111065)
[00:41:10] - User ID: ******************
[00:41:10] - Machine ID: 2
[00:41:10]
[00:41:10] Loaded queue successfully.
[00:41:10] - Preparing to get new work unit...
[00:41:10] - Autosending finished units... [January 11 00:41:10 UTC]
[00:41:10] Cleaning up work directory
[00:41:10] Trying to send all finished work units
[00:41:10] Project: 6900 (Run 10, Clone 20, Gen 15)
[00:41:10] + Attempting to get work packet
[00:41:10] Passkey found
[00:41:10] - Will indicate memory of 4087 MB
[00:41:10] + Attempting to send results [January 11 00:41:10 UTC]
[00:41:10] - Detect CPU.[00:41:10] - Reading file work/wuresults_01.dat from core
Vendor: GenuineIntel, Family: 6, Model: 14, Stepping: 5
[00:41:10] - Connecting to assignment server
[00:41:10] (Read 100183264 bytes from disk)
[00:41:10] Connecting to http://assign.stanford.edu:8080/
[00:41:10] Connecting to http://130.237.232.141:8080/
[00:41:11] Posted data.
[00:41:11] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[00:41:11] + News From Folding@Home: Welcome to Folding@Home
[00:41:11] Loaded queue successfully.
[00:41:11] Sent data
[00:41:11] Connecting to http://171.67.108.22:8080/
[00:41:20] Posted data.
[00:41:20] Initial: 0000; - Receiving payload (expected size: 26648730)
[00:44:06] - Downloaded at ~156 kB/s
[00:44:06] - Averaged speed for that direction ~198 kB/s
[00:44:06] + Received work.
[00:44:06] + Closed connections
[00:44:06]
[00:44:06] + Processing work unit
[00:44:06] Core required: FahCore_a3.exe
[00:44:06] Core found.
[00:44:06] Working on queue slot 02 [January 11 00:44:06 UTC]
[00:44:06] + Working ...
[00:44:06] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 8 -nocpulock -checkpoint 3 -forceasm -verbose -lifeline 772 -version 630'
[00:44:06]
[00:44:06] *------------------------------*
[00:44:06] Folding@Home Gromacs SMP Core
[00:44:06] Version 2.22 (Mar 12, 2010)
[00:44:06]
[00:44:06] Preparing to commence simulation
[00:44:06] - Assembly optimizations manually forced on.
[00:44:06] - Not checking prior termination.
[00:44:12] - Expanded 26648218 -> 33000273 (decompressed 123.8 percent)
[00:44:12] Called DecompressByteArray: compressed_data_size=26648218 data_size=33000273, decompressed_data_size=33000273 diff=0
[00:44:12] - Digital signature verified
[00:44:12]
[00:44:12] Project: 2685 (Run 3, Clone 0, Gen 47)
[00:44:12]
[00:44:13] Assembly optimizations on if available.
[00:44:13] Entering M.D.
[00:44:23] Completed 0 out of 250000 steps (0%)
[00:45:18] - Couldn't send HTTP request to server
[00:45:18] + Could not connect to Work Server (results)
[00:45:18] (130.237.232.141:8080)
[00:45:18] + Retrying using alternative port
[00:45:18] Connecting to http://130.237.232.141:80/
[00:48:25] - Couldn't send HTTP request to server
[00:48:25] + Could not connect to Work Server (results)
[00:48:25] (130.237.232.141:80)
[00:48:25] - Error: Could not transmit unit 01 (completed January 10) to work server.
[00:48:25] - 10 failed uploads of this unit.
[00:48:25] + Attempting to send results [January 11 00:48:25 UTC]
[00:48:25] - Reading file work/wuresults_01.dat from core
[00:48:25] (Read 100183264 bytes from disk)
[00:48:25] Connecting to http://130.237.165.141:8080/
[00:48:25] - Couldn't send HTTP request to server
[00:48:25] + Could not connect to Work Server (results)
[00:48:25] (130.237.165.141:8080)
[00:48:25] + Retrying using alternative port
[00:48:25] Connecting to http://130.237.165.141:80/
[00:48:26] - Couldn't send HTTP request to server
[00:48:26] + Could not connect to Work Server (results)
[00:48:26] (130.237.165.141:80)
[00:48:26] Could not transmit unit 01 to Collection server; keeping in queue.
[00:48:26] + Sent 0 of 1 completed units to the server
[00:48:26] - Autosend completed
[01:25:37] Completed 2500 out of 250000 steps (1%)
[02:06:36] Completed 5000 out of 250000 steps (2%)
[02:47:33] Completed 7500 out of 250000 steps (3%)
[03:28:25] Completed 10000 out of 250000 steps (4%)
[04:09:28] Completed 12500 out of 250000 steps (5%)
[04:50:28] Completed 15000 out of 250000 steps (6%)
[05:31:23] Completed 17500 out of 250000 steps (7%)
[06:12:29] Completed 20000 out of 250000 steps (8%)
[06:48:26] - Autosending finished units... [January 11 06:48:26 UTC]
[06:48:26] Trying to send all finished work units
[06:48:26] Project: 6900 (Run 10, Clone 20, Gen 15)
[06:48:26] + Attempting to send results [January 11 06:48:26 UTC]
[06:48:26] - Reading file work/wuresults_01.dat from core
[06:48:26] (Read 100183264 bytes from disk)
[06:48:26] Connecting to http://130.237.232.141:8080/
[06:52:15] - Couldn't send HTTP request to server
[06:52:15] + Could not connect to Work Server (results)
[06:52:15] (130.237.232.141:8080)
[06:52:15] + Retrying using alternative port
[06:52:15] Connecting to http://130.237.232.141:80/
[06:53:41] Completed 22500 out of 250000 steps (9%)
[06:55:08] - Couldn't send HTTP request to server
[06:55:08] + Could not connect to Work Server (results)
[06:55:08] (130.237.232.141:80)
[06:55:08] - Error: Could not transmit unit 01 (completed January 10) to work server.
[06:55:08] - 11 failed uploads of this unit.
[06:55:08] + Attempting to send results [January 11 06:55:08 UTC]
[06:55:08] - Reading file work/wuresults_01.dat from core
[06:55:08] (Read 100183264 bytes from disk)
[06:55:08] Connecting to http://130.237.165.141:8080/
[06:55:08] - Couldn't send HTTP request to server
[06:55:08] + Could not connect to Work Server (results)
[06:55:08] (130.237.165.141:8080)
[06:55:08] + Retrying using alternative port
[06:55:08] Connecting to http://130.237.165.141:80/
[06:55:08] - Couldn't send HTTP request to server
[06:55:08] + Could not connect to Work Server (results)
[06:55:08] (130.237.165.141:80)
[06:55:08] Could not transmit unit 01 to Collection server; keeping in queue.
[06:55:08] + Sent 0 of 1 completed units to the server
[06:55:08] - Autosend completed
[07:35:37] Completed 25000 out of 250000 steps (10%)
[08:17:28] Completed 27500 out of 250000 steps (11%)
[08:59:16] Completed 30000 out of 250000 steps (12%)
[09:41:08] Completed 32500 out of 250000 steps (13%)
[10:22:51] Completed 35000 out of 250000 steps (14%)
[11:04:50] Completed 37500 out of 250000 steps (15%)
P2684:
Code: Select all
--- Opening Log file [January 4 18:25:25 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.30
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\FAH Tracker\FAH GPU Tracker V2\SMP
Executable: C:\FAH Tracker\FAH GPU Tracker V2\FAH.exe
Arguments: -oneunit -forceasm -smp -bigadv -verbosity 9
[18:25:25] - Ask before connecting: No
[18:25:25] - User name: Howdy2u2 (Team 111065)
[18:25:25] - User ID: **********************
[18:25:25] - Machine ID: 2
[18:25:25]
[18:25:25] Work directory not found. Creating...
[18:25:25] Could not open work queue, generating new queue...
[18:25:25] - Preparing to get new work unit...
[18:25:25] - Autosending finished units... [January 4 18:25:25 UTC]
[18:25:25] Cleaning up work directory
[18:25:25] Trying to send all finished work units
[18:25:25] + No unsent completed units remaining.
[18:25:25] - Autosend completed
[18:25:25] + Attempting to get work packet
[18:25:25] Passkey found
[18:25:25] - Will indicate memory of 4087 MB
[18:25:25] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 14, Stepping: 5
[18:25:25] - Connecting to assignment server
[18:25:25] Connecting to http://assign.stanford.edu:8080/
[18:25:25] Posted data.
[18:25:25] Initial: 43AB; - Successful: assigned to (171.67.108.22).
[18:25:25] + News From Folding@Home: Welcome to Folding@Home
[18:25:25] Loaded queue successfully.
[18:25:25] Sent data
[18:25:25] Connecting to http://171.67.108.22:8080/
[18:25:34] Posted data.
[18:25:34] Initial: 0000; - Receiving payload (expected size: 24836155)
[18:26:05] - Downloaded at ~782 kB/s
[18:26:05] - Averaged speed for that direction ~782 kB/s
[18:26:05] + Received work.
[18:26:05] + Closed connections
[18:26:05]
[18:26:05] + Processing work unit
[18:26:05] Core required: FahCore_a3.exe
[18:26:05] Core found.
[18:26:05] Working on queue slot 01 [January 4 18:26:05 UTC]
[18:26:05] + Working ...
[18:26:05] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 01 -np 8 -nocpulock -checkpoint 3 -forceasm -verbose -lifeline 1388 -version 630'
[18:26:05]
[18:26:05] *------------------------------*
[18:26:05] Folding@Home Gromacs SMP Core
[18:26:05] Version 2.22 (Mar 12, 2010)
[18:26:05]
[18:26:05] Preparing to commence simulation
[18:26:05] - Assembly optimizations manually forced on.
[18:26:05] - Not checking prior termination.
[18:26:10] - Expanded 24835643 -> 30791309 (decompressed 123.9 percent)
[18:26:10] Called DecompressByteArray: compressed_data_size=24835643 data_size=30791309, decompressed_data_size=30791309 diff=0
[18:26:10] - Digital signature verified
[18:26:10]
[18:26:10] Project: 2684 (Run 14, Clone 22, Gen 37)
[18:26:10]
[18:26:11] Assembly optimizations on if available.
[18:26:11] Entering M.D.
[18:26:22] Completed 0 out of 250000 steps (0%)
[19:16:21] Completed 2500 out of 250000 steps (1%)
[20:06:30] Completed 5000 out of 250000 steps (2%)
[20:56:46] Completed 7500 out of 250000 steps (3%)
[21:47:04] Completed 10000 out of 250000 steps (4%)
[22:37:23] Completed 12500 out of 250000 steps (5%)
[23:27:47] Completed 15000 out of 250000 steps (6%)
[00:18:01] Completed 17500 out of 250000 steps (7%)
[00:25:25] - Autosending finished units... [January 5 00:25:25 UTC]
[00:25:25] Trying to send all finished work units
[00:25:25] + No unsent completed units remaining.
[00:25:25] - Autosend completed
[01:08:05] Completed 20000 out of 250000 steps (8%)
[01:58:25] Completed 22500 out of 250000 steps (9%)
[02:48:36] Completed 25000 out of 250000 steps (10%)
[03:38:36] Completed 27500 out of 250000 steps (11%)
[04:28:54] Completed 30000 out of 250000 steps (12%)
[05:19:03] Completed 32500 out of 250000 steps (13%)
[06:09:31] Completed 35000 out of 250000 steps (14%)
[06:25:25] - Autosending finished units... [January 5 06:25:25 UTC]
[06:25:25] Trying to send all finished work units
[06:25:25] + No unsent completed units remaining.
[06:25:25] - Autosend completed
[06:59:49] Completed 37500 out of 250000 steps (15%)
[07:49:51] Completed 40000 out of 250000 steps (16%)
[08:40:08] Completed 42500 out of 250000 steps (17%)
[09:30:16] Completed 45000 out of 250000 steps (18%)
[10:20:29] Completed 47500 out of 250000 steps (19%)
[11:10:22] Completed 50000 out of 250000 steps (20%)
[12:00:27] Completed 52500 out of 250000 steps (21%)
[12:25:25] - Autosending finished units... [January 5 12:25:25 UTC]
[12:25:25] Trying to send all finished work units
[12:25:25] + No unsent completed units remaining.
[12:25:25] - Autosend completed
[12:50:34] Completed 55000 out of 250000 steps (22%)
[13:40:31] Completed 57500 out of 250000 steps (23%)
[14:30:28] Completed 60000 out of 250000 steps (24%)
[15:20:56] Completed 62500 out of 250000 steps (25%)
[16:11:04] Completed 65000 out of 250000 steps (26%)
[17:01:09] Completed 67500 out of 250000 steps (27%)
[17:51:19] Completed 70000 out of 250000 steps (28%)
[18:25:25] - Autosending finished units... [January 5 18:25:25 UTC]
[18:25:25] Trying to send all finished work units
[18:25:25] + No unsent completed units remaining.
[18:25:25] - Autosend completed
[18:41:16] Completed 72500 out of 250000 steps (29%)
[19:31:26] Completed 75000 out of 250000 steps (30%)
[20:21:32] Completed 77500 out of 250000 steps (31%)
[21:11:55] Completed 80000 out of 250000 steps (32%)
[22:01:52] Completed 82500 out of 250000 steps (33%)
[22:52:11] Completed 85000 out of 250000 steps (34%)
[23:42:32] Completed 87500 out of 250000 steps (35%)
[00:25:25] - Autosending finished units... [January 6 00:25:25 UTC]
[00:25:25] Trying to send all finished work units
[00:25:25] + No unsent completed units remaining.
[00:25:25] - Autosend completed
[00:32:30] Completed 90000 out of 250000 steps (36%)
[01:22:42] Completed 92500 out of 250000 steps (37%)
[02:13:05] Completed 95000 out of 250000 steps (38%)
[03:03:22] Completed 97500 out of 250000 steps (39%)
[03:53:41] Completed 100000 out of 250000 steps (40%)
[04:44:03] Completed 102500 out of 250000 steps (41%)
[05:34:23] Completed 105000 out of 250000 steps (42%)
[06:24:46] Completed 107500 out of 250000 steps (43%)
[06:25:25] - Autosending finished units... [January 6 06:25:25 UTC]
[06:25:25] Trying to send all finished work units
[06:25:25] + No unsent completed units remaining.
[06:25:25] - Autosend completed
[07:15:16] Completed 110000 out of 250000 steps (44%)
[08:05:39] Completed 112500 out of 250000 steps (45%)
[08:55:55] Completed 115000 out of 250000 steps (46%)
[09:46:05] Completed 117500 out of 250000 steps (47%)
[10:36:26] Completed 120000 out of 250000 steps (48%)
[11:26:54] Completed 122500 out of 250000 steps (49%)
[12:16:42] Completed 125000 out of 250000 steps (50%)
[12:25:25] - Autosending finished units... [January 6 12:25:25 UTC]
[12:25:25] Trying to send all finished work units
[12:25:25] + No unsent completed units remaining.
[12:25:25] - Autosend completed
[13:06:46] Completed 127500 out of 250000 steps (51%)
[13:56:51] Completed 130000 out of 250000 steps (52%)
[14:46:58] Completed 132500 out of 250000 steps (53%)
[15:37:24] Completed 135000 out of 250000 steps (54%)
[16:27:32] Completed 137500 out of 250000 steps (55%)
[17:17:30] Completed 140000 out of 250000 steps (56%)
[18:07:15] Completed 142500 out of 250000 steps (57%)
[18:25:25] - Autosending finished units... [January 6 18:25:25 UTC]
[18:25:25] Trying to send all finished work units
[18:25:25] + No unsent completed units remaining.
[18:25:25] - Autosend completed
[18:57:15] Completed 145000 out of 250000 steps (58%)
[19:47:10] Completed 147500 out of 250000 steps (59%)
[20:36:57] Completed 150000 out of 250000 steps (60%)
[21:26:46] Completed 152500 out of 250000 steps (61%)
[22:16:43] Completed 155000 out of 250000 steps (62%)
[23:06:41] Completed 157500 out of 250000 steps (63%)
[23:56:34] Completed 160000 out of 250000 steps (64%)
[00:25:25] - Autosending finished units... [January 7 00:25:25 UTC]
[00:25:25] Trying to send all finished work units
[00:25:25] + No unsent completed units remaining.
[00:25:25] - Autosend completed
[00:46:36] Completed 162500 out of 250000 steps (65%)
[01:36:22] Completed 165000 out of 250000 steps (66%)
[02:26:11] Completed 167500 out of 250000 steps (67%)
[03:16:08] Completed 170000 out of 250000 steps (68%)
[04:05:42] Completed 172500 out of 250000 steps (69%)
[04:55:34] Completed 175000 out of 250000 steps (70%)
[05:45:33] Completed 177500 out of 250000 steps (71%)
[06:25:25] - Autosending finished units... [January 7 06:25:25 UTC]
[06:25:25] Trying to send all finished work units
[06:25:25] + No unsent completed units remaining.
[06:25:25] - Autosend completed
[06:35:41] Completed 180000 out of 250000 steps (72%)
[07:25:41] Completed 182500 out of 250000 steps (73%)
[08:15:52] Completed 185000 out of 250000 steps (74%)
[09:05:51] Completed 187500 out of 250000 steps (75%)
[09:55:41] Completed 190000 out of 250000 steps (76%)
[10:45:55] Completed 192500 out of 250000 steps (77%)
[11:35:46] Completed 195000 out of 250000 steps (78%)
[12:25:25] - Autosending finished units... [January 7 12:25:25 UTC]
[12:25:25] Trying to send all finished work units
[12:25:25] + No unsent completed units remaining.
[12:25:25] - Autosend completed
[12:25:47] Completed 197500 out of 250000 steps (79%)
[13:15:43] Completed 200000 out of 250000 steps (80%)
[14:05:51] Completed 202500 out of 250000 steps (81%)
[14:55:55] Completed 205000 out of 250000 steps (82%)
[15:46:22] Completed 207500 out of 250000 steps (83%)
[16:36:27] Completed 210000 out of 250000 steps (84%)
[17:26:36] Completed 212500 out of 250000 steps (85%)
[18:16:33] Completed 215000 out of 250000 steps (86%)
[18:25:25] - Autosending finished units... [January 7 18:25:25 UTC]
[18:25:25] Trying to send all finished work units
[18:25:25] + No unsent completed units remaining.
[18:25:25] - Autosend completed
[19:06:43] Completed 217500 out of 250000 steps (87%)
[19:56:43] Completed 220000 out of 250000 steps (88%)
[20:46:51] Completed 222500 out of 250000 steps (89%)
[21:37:04] Completed 225000 out of 250000 steps (90%)
[22:27:15] Completed 227500 out of 250000 steps (91%)
[23:17:22] Completed 230000 out of 250000 steps (92%)
[00:07:34] Completed 232500 out of 250000 steps (93%)
[00:25:25] - Autosending finished units... [January 8 00:25:25 UTC]
[00:25:25] Trying to send all finished work units
[00:25:25] + No unsent completed units remaining.
[00:25:25] - Autosend completed
[00:57:49] Completed 235000 out of 250000 steps (94%)
[01:48:10] Completed 237500 out of 250000 steps (95%)
[02:38:31] Completed 240000 out of 250000 steps (96%)
[03:29:06] Completed 242500 out of 250000 steps (97%)
[04:19:28] Completed 245000 out of 250000 steps (98%)
[05:09:53] Completed 247500 out of 250000 steps (99%)
[06:00:02] Completed 250000 out of 250000 steps (100%)
[06:00:17] DynamicWrapper: Finished Work Unit: sleep=10000
[06:00:27]
[06:00:27] Finished Work Unit:
[06:00:27] - Reading up to 52629024 from "work/wudata_01.trr": Read 52629024
[06:00:27] trr file hash check passed.
[06:00:27] - Reading up to 42745464 from "work/wudata_01.xtc": Read 42745464
[06:00:27] xtc file hash check passed.
[06:00:27] edr file hash check passed.
[06:00:27] logfile size: 299147
[06:00:27] Leaving Run
[06:00:30] - Writing 95841579 bytes of core data to disk...
[06:00:32] ... Done.
[06:01:03] - Shutting down core
[06:01:03]
[06:01:03] Folding@home Core Shutdown: FINISHED_UNIT
[06:01:12] CoreStatus = 64 (100)
[06:01:12] Unit 1 finished with 42 percent of time to deadline remaining.
[06:01:12] Updated performance fraction: 0.419547
[06:01:12] Sending work to server
[06:01:12] Project: 2684 (Run 14, Clone 22, Gen 37)
[06:01:12] + Attempting to send results [January 8 06:01:12 UTC]
[06:01:12] - Reading file work/wuresults_01.dat from core
[06:01:12] (Read 95841579 bytes from disk)
[06:01:12] Connecting to http://171.67.108.22:8080/
[06:15:04] Posted data.
[06:15:05] Initial: 0000; - Uploaded at ~111 kB/s
[06:15:12] - Averaged speed for that direction ~111 kB/s
[06:15:12] + Results successfully sent
[06:15:12] Thank you for your contribution to Folding@Home.
[06:15:12] + Number of Units Completed: 46
[06:15:19] Trying to send all finished work units
[06:15:19] + No unsent completed units remaining.
[06:15:19] + -oneunit flag given and have now finished a unit. Exiting.***** Got a SIGTERM signal (2)
[06:15:19] Killing all core threads
[06:15:19] Could not get process id information. Please kill core process manually
Folding@Home Client Shutdown.
Any ideas on this issue would be appreciated.
EDIT: P6900 was completed around 11 hours ago at time of this post.
Re: P6900 unable to upload
Posted: Tue Jan 11, 2011 5:16 pm
by 7im
What do you see when you enter this URL in a web browser?
http://130.237.232.141:8080
Re: P6900 unable to upload
Posted: Tue Jan 11, 2011 7:45 pm
by Howdy2u2
In IE I receive "OK" I tried from my main computer and also the computer that is having the issue, Its up to 13 failed attempts.
Re: P6900 unable to upload
Posted: Tue Jan 11, 2011 9:01 pm
by 7im
Ya, the server status page (link at top of page) shows that server as online. And the OK message shows there isn't anything blocking the connection from your computer to their server.
Not sure on that one. Maybe someone else has an idea...
Re: P6900 unable to upload
Posted: Wed Jan 12, 2011 1:08 am
by AtwaterFS
Disable any host-based firewalls or AV - I have seen AVG block FAH's uploading in the past...
If it still happens after that then I would guess it's some sort of ISP filtering...
Wouldnt hurt to power cycle ur router either...
Re: P6900 unable to upload
Posted: Wed Jan 12, 2011 2:01 am
by Howdy2u2
AtwaterFS wrote:Disable any host-based firewalls or AV - I have seen AVG block FAH's uploading in the past...
If it still happens after that then I would guess it's some sort of ISP filtering...
Wouldnt hurt to power cycle ur router either...
That is the 1st thing I thought of (firewall or AV) when the P6900 wouldnt upload so I disabled the firewall and AV. I restarted the client and have let it run since. ( 1d 1hr 15min as of this post) It still will not upload, but prior to this if anyone can explain. Why, with the firewall and AV enabled could it upload the P2684? and not the P6900? I can connect to the server IP on that specific machine and receive "OK" in the browser with the firewall and AV enabled.
Re: P6900 unable to upload
Posted: Wed Jan 12, 2011 2:30 am
by k1wi
Just to clarify, have you successfully returned a work unit since the 6900 work unit failed to update?
Re: P6900 unable to upload
Posted: Wed Jan 12, 2011 2:38 am
by Howdy2u2
Not as of yet on that specific machine as far as SMPs, It downloaded a P2685 after I restarted the client. GPU Wus on that machine yes. The current WU is @ 37% P2685
I am currently running 11 clients on 4 machines, I have no issues with any clients uploading UNLESS its a P6900.
2-SMP CPU
1--bigadv
1-GPU2
7-GPU3