Page 3 of 28
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 5:39 pm
by shunter
I'm now up to 11 lost units plus another 4 5781's to finish in the next hour or so which will probably go the same way as the others so I'm shutting down GPU folding until this is resolved as I seem to be wasting time and money here. My last unit accepted was a 5781 at 5.22 am this morning and the log of that is below. It shows "- Read packet limit of 540015616... Set to 524286976" yet this was successful and my units total increased.
Rgds
Shunter.
[05:22:04] Folding@home Core Shutdown: FINISHED_UNIT
[05:22:07] CoreStatus = 64 (100)
[05:22:07] Unit 6 finished with 99 percent of time to deadline remaining.
[05:22:07] Updated performance fraction: 0.983509
[05:22:07] Sending work to server
[05:22:07] Project: 5781 (Run 16, Clone 59, Gen 3)
[05:22:07] - Read packet limit of 540015616... Set to 524286976.
[05:22:07] + Attempting to send results [February 14 05:22:07 UTC]
[05:22:07] - Reading file work/wuresults_06.dat from core
[05:22:07] (Read 169001 bytes from disk)
[05:22:07] Connecting to
http://171.67.108.21:8080/
[05:22:10] Posted data.
[05:22:10] Initial: 0000; - Uploaded at ~55 kB/s
[05:22:10] - Averaged speed for that direction ~44 kB/s
[05:22:10] + Results successfully sent
[05:22:10] Thank you for your contribution to Folding@Home.
[05:22:10] + Number of Units Completed: 1932
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 5:43 pm
by SnW
I find it weird no ADMIN/STAFF has replied in here yet ?!
ITS NOT LIKE ITS A SMALL PROBLEM ..
Sorry crapslock....
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 5:53 pm
by tobor
Yes it is weird no Staff/Admin have replied to this ???
It's not like this just started today either. I was having probs last week along with others.
What gets me the server page shows all these servers are accepting ???
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 5:57 pm
by DrSpalding
I have the same issue with both of my GPU clients:
1:
Code: Select all
[08:40:59] Folding@home Core Shutdown: FINISHED_UNIT
[08:41:02] CoreStatus = 64 (100)
[08:41:02] Sending work to server
[08:41:02] Project: 5781 (Run 15, Clone 764, Gen 3)
[08:41:02] - Read packet limit of 540015616... Set to 524286976.
[08:41:02] + Attempting to send results [February 14 08:41:02 UTC]
[08:41:03] - Couldn't send HTTP request to server
[08:41:03] + Could not connect to Work Server (results)
[08:41:03] (171.67.108.21:8080)
[08:41:03] + Retrying using alternative port
[08:41:24] - Couldn't send HTTP request to server
[08:41:24] + Could not connect to Work Server (results)
[08:41:24] (171.67.108.21:80)
[08:41:24] - Error: Could not transmit unit 08 (completed February 14) to work server.
[08:41:24] Keeping unit 08 in queue.
[08:41:24] Project: 5781 (Run 15, Clone 764, Gen 3)
[08:41:24] - Read packet limit of 540015616... Set to 524286976.
[08:41:24] + Attempting to send results [February 14 08:41:24 UTC]
[08:41:25] - Server has already received unit.
[08:41:25] - Preparing to get new work unit...
[08:41:25] + Attempting to get work packet
[08:41:25] - Connecting to assignment server
[08:41:25] - Successful: assigned to (171.67.108.21).
[08:41:25] + News From Folding@Home: Welcome to Folding@Home
[08:41:25] Loaded queue successfully.
[08:41:26] + Closed connections
2:
Code: Select all
[08:50:40] Folding@home Core Shutdown: FINISHED_UNIT
[08:50:43] CoreStatus = 64 (100)
[08:50:43] Sending work to server
[08:50:43] Project: 3470 (Run 14, Clone 112, Gen 2)
[08:50:43] - Read packet limit of 540015616... Set to 524286976.
[08:50:43] + Attempting to send results [February 14 08:50:43 UTC]
[08:50:43] - Couldn't send HTTP request to server
[08:50:43] + Could not connect to Work Server (results)
[08:50:43] (171.67.108.21:8080)
[08:50:43] + Retrying using alternative port
[08:51:04] - Couldn't send HTTP request to server
[08:51:04] + Could not connect to Work Server (results)
[08:51:04] (171.67.108.21:80)
[08:51:04] - Error: Could not transmit unit 03 (completed February 14) to work server.
[08:51:04] Keeping unit 03 in queue.
[08:51:04] Project: 3470 (Run 14, Clone 112, Gen 2)
[08:51:04] - Read packet limit of 540015616... Set to 524286976.
[08:51:04] + Attempting to send results [February 14 08:51:04 UTC]
[08:51:05] - Server has already received unit.
[08:51:05] - Preparing to get new work unit...
[08:51:05] + Attempting to get work packet
[08:51:05] - Connecting to assignment server
[08:51:05] - Successful: assigned to (171.67.108.21).
[08:51:05] + News From Folding@Home: Welcome to Folding@Home
[08:51:05] Loaded queue successfully.
[08:51:05] + Closed connections
Client #1 now has three and Client #2 has six of these "not sent" but "already received" WUs. I am thinking I should stop the clients until the issue is cleared up so I can hopefully upload the results that are still valid in the client's work directories.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 6:02 pm
by spike09
Same here on both GPU2 clients
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 7:20 pm
by SnW
I guess they don't care people STOP their GPU's and or the lost WU's that are going around
this is going on for a few days now ....]
EDIT aaa this is even better , now i can't get WU's either , great..........
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 7:33 pm
by DrSpalding
If I had some assurance that I could actually get these WUs uploaded successfully, I would simply archive the data (FAHlog*.txt, queue.dat and work/*) and motor onward for 12 hours at a stretch and then do it again. W/o an assurance that Stanford's science and our contribution is actually the result of our wattage use, I will wait until we hear word on it. I am not going to begrudge Pande Group taking Valentine's Day off either. Everybody needs somebody.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 7:34 pm
by jima13
spike09 wrote:Same here on both GPU2 clients
Same here on 7GPU's...checked a few log's and it appears to have started after 06:00:00UTC Feb14
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 7:41 pm
by Tobit
DrSpalding wrote:I am not going to begrudge Pande Group taking Valentine's Day off either. Everybody needs somebody.
It is also Presidents Day tomorrow.. why do these things always happen when no one is around?
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 7:44 pm
by chriskwarren
171.67.108.21 is giving me the same problems as others here, and some folders on my team are reporting the same.
Any update?
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 7:48 pm
by BuddhaChu
171.67.108.21 port 8080 responded with "OK", but it's not giving out WUs to my GPU.
This is not good (understatement of the day)
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 7:54 pm
by TheWolf
3 rigs with no work, 2x260GTX & 1x8800GTS, others will soon be.
Someone needs to fix this problem. (171.67.108.21)
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 7:57 pm
by Nathan_P
BuddhaChu wrote:171.67.108.21 port 8080 responded with "OK", but it's not giving out WUs to my GPU.
This is not good (understatement of the day)
That server is very heavily loaded, according to the status page its currently trying to deal with 480 different connections. No wonder its going pear shaped. I've become that despondant i've even restarted the cpu client on my main rig. i wouldn't mind but i can feed my gts 250 for the same amount of juice and get much more done.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 7:59 pm
by kiore
Well I've managed to send some of the numerous completed gpu units and have got some new work on one of my systems,5766-5771 units, so maybe things are starting to work again.
Re: GPU server status 171.67.108.21, 171.64.65.71,171.67.108.26
Posted: Sun Feb 14, 2010 7:59 pm
by Tobit
TheWolf wrote:3 rigs with no work, 2x260GTX & 1x8800GTS, others will soon be.
Someone needs to fix this problem. (171.67.108.21)
It's a holiday weekend in the US, don't expect a quick fix.