Folding Forum

Posted: **Thu Apr 23, 2009 5:21 pm**

Thanx ihaque, mine sent last night befor you posted this..... keep up the good work.

Peace

Posted: **Mon May 04, 2009 4:06 pm**

Work assignments not working properly ATM.

http://171.64.122.70/ does not return OK
http://171.64.122.70:8080/ returns OK

2 of 4 GPU's have not been assigned new WU.

Posted: **Mon May 04, 2009 4:27 pm**

With 171.67.108.11 being in reject mode : viewtopic.php?f=18&t=9691, 171.64.122.70 is running low on WU ... there's no need to worry about this, it might just take a few more attempts to get a WU, but the server is working fine.

Posted: **Mon May 04, 2009 4:48 pm**

I'm bringing more WUs online. I'll take a look at the port 80 issue too.

Posted: **Mon May 04, 2009 6:48 pm**

I'm unable to deliver WU's, it says "Server reports packet it received specified a data size of 0."

Code: Select all

[18:27:57] Completed 97%
[18:33:08] Completed 98%
[18:37:57] Completed 99%
[18:43:18] Completed 100%
[18:43:18] Successful run
[18:43:18] DynamicWrapper: Finished Work Unit: sleep=10000
[18:43:28] Reserved 33832 bytes for xtc file; Cosm status=0
[18:43:28] Allocated 33832 bytes for xtc file
[18:43:28] - Reading up to 33832 from "work/wudata_00.xtc": Read 33832
[18:43:28] Read 33832 bytes from xtc file; available packet space=786396632
[18:43:28] xtc file hash check passed.
[18:43:28] Reserved 23472 23472 786396632 bytes for arc file=<work/wudata_00.trr> Cosm status=0
[18:43:28] Allocated 23472 bytes for arc file
[18:43:28] - Reading up to 23472 from "work/wudata_00.trr": Read 23472
[18:43:28] Read 23472 bytes from arc file; available packet space=786373160
[18:43:28] trr file hash check passed.
[18:43:28] Allocated 560 bytes for edr file
[18:43:28] Read bedfile
[18:43:28] edr file hash check passed.
[18:43:28] Allocated 154867 bytes for logfile
[18:43:28] Read logfile
[18:43:28] GuardedRun: success in DynamicWrapper
[18:43:28] GuardedRun: done
[18:43:28] Run: GuardedRun completed.
[18:43:33] - Writing 213243 bytes of core data to disk...
[18:43:33] Done: 212731 -> 68369 (compressed to 32.1 percent)
[18:43:33]   ... Done.
[18:43:33] - Shutting down core 
[18:43:33] 
[18:43:33] Folding@home Core Shutdown: FINISHED_UNIT
[18:43:36] CoreStatus = 64 (100)
[18:43:36] Sending work to server
[18:43:36] Project: 5904 (Run 14, Clone 975, Gen 16)


[18:43:36] + Attempting to send results [May 4 18:43:36 UTC]
[18:43:37] - Couldn't send HTTP request to server
[18:43:37] + Could not connect to Work Server (results)
[18:43:37]     (171.64.122.70:8080)
[18:43:37] + Retrying using alternative port
[18:43:38] - Couldn't send HTTP request to server
[18:43:38] + Could not connect to Work Server (results)
[18:43:38]     (171.64.122.70:80)
[18:43:38] - Error: Could not transmit unit 00 (completed May 4) to work server.
[18:43:38]   Keeping unit 00 in queue.
[18:43:38] Project: 5904 (Run 14, Clone 975, Gen 16)


[18:43:38] + Attempting to send results [May 4 18:43:38 UTC]
[18:43:40] - Couldn't send HTTP request to server
[18:43:40] + Could not connect to Work Server (results)
[18:43:40]     (171.64.122.70:8080)
[18:43:40] + Retrying using alternative port
[18:43:41] - Couldn't send HTTP request to server
[18:43:41] + Could not connect to Work Server (results)
[18:43:41]     (171.64.122.70:80)
[18:43:41] - Error: Could not transmit unit 00 (completed May 4) to work server.


[18:43:41] + Attempting to send results [May 4 18:43:41 UTC]
[18:43:41] - Server reports packet it received specified a data size of 0.
[18:43:41]   (May be due to corruption during network transmission or a corrupted file.)
[18:43:41]   Could not transmit unit 00 to Collection server; keeping in queue.
[18:43:41] Project: 5904 (Run 14, Clone 975, Gen 16)


[18:43:41] + Attempting to send results [May 4 18:43:41 UTC]
[18:43:42] - Couldn't send HTTP request to server
[18:43:42] + Could not connect to Work Server (results)
[18:43:42]     (171.64.122.70:8080)
[18:43:42] + Retrying using alternative port
[18:43:43] - Couldn't send HTTP request to server
[18:43:43] + Could not connect to Work Server (results)
[18:43:43]     (171.64.122.70:80)
[18:43:43] - Error: Could not transmit unit 00 (completed May 4) to work server.


[18:43:43] + Attempting to send results [May 4 18:43:43 UTC]
[18:43:44] - Server reports packet it received specified a data size of 0.
[18:43:44]   (May be due to corruption during network transmission or a corrupted file.)
[18:43:44]   Could not transmit unit 00 to Collection server; keeping in queue.

Posted: **Mon May 04, 2009 7:15 pm**

Server is back online, and should have plenty of WUs. Most are currently on advanced methods, but I'll move them into public quickly if there are no problems.

Posted: **Mon May 04, 2009 7:49 pm**

Good deal, looks like my WU just got delivered successfully.

Code: Select all

[19:32:22] Completed 23%
[19:34:30] Completed 24%
[19:36:34] Completed 25%
[19:38:19] Project: 5904 (Run 14, Clone 975, Gen 16)

[19:38:19] + Attempting to send results [May 4 19:38:19 UTC]
[19:38:22] + Results successfully sent
[19:38:22] Thank you for your contribution to Folding@Home.
[19:38:22] + Number of Units Completed: 784

[19:38:36] Completed 26%
[19:40:39] Completed 27%

Posted: **Mon Jun 15, 2009 2:23 pm**

FYI

This server has been down for about 9 hours now and the CS server that the client is trying send back a WU to is also down(171.65.103.100).

Posted: **Mon Jun 15, 2009 5:25 pm**

It seems 171.65.103.100 is down my GPU2 client has been trying for several hours on both port 80 and port 8080 to upload results I have 2 completed wu's ready for upload and just downloaded a new wu' assignment and started folding. I also tried to connect to the server on port 80 and 8080 wit my web browser and all I received was a page load error "Network Timeout The server at 171.65.103.100 is taking too long to respond".

Here is a portion of the log if you need more I can provide.

Code: Select all

[16:54:03] + Attempting to send results [June 15 16:54:03 UTC]
[16:54:03] - Reading file work/wuresults_00.dat from core
[16:54:03]   (Read 70355 bytes from disk)
[16:54:03] Connecting to http://171.65.103.100:8080/
[16:57:12] - Couldn't send HTTP request to server
[16:57:12] + Could not connect to Work Server (results)
[16:57:12]     (171.65.103.100:8080)
[16:57:12] + Retrying using alternative port
[16:57:12] Connecting to http://171.65.103.100:80/
[17:00:21] - Couldn't send HTTP request to server
[17:00:21] + Could not connect to Work Server (results)
[17:00:21]     (171.65.103.100:80)
[17:00:21]   Could not transmit unit 00 to Collection server; keeping in queue.
[17:00:21] + Sent 0 of 2 completed units to the server
[17:00:21] + Closed connections

Posted: **Mon Jun 15, 2009 5:39 pm**

Hmm... typo in the title. server ..103.100.

PG pinged.

Posted: **Mon Jun 15, 2009 5:57 pm**

Sorry for the typo 7im title has been edited with the correct server info.

Posted: **Mon Jun 15, 2009 6:05 pm**

No problem. Just wanted to make sure PG would be checking the right server.

Posted: **Mon Jun 15, 2009 7:59 pm**

cannot connect to this server today. have i misconfigured something?? or is there an issue with the server??

Posted: **Mon Jun 15, 2009 8:31 pm**

Server is listed as down

has been for quite a few hrs now.
unsent work units here too!

Teddy

Posted: **Mon Jun 15, 2009 9:13 pm**

Well my GPU completed another wu and successfully sent the results back but that wu went to another server it still failed to upload the two complete wu's that are in the que to 171.65.103.100 but it did download another wu and has started folding on that unit maybe when this wu is finished folding the server will be back in operation to receive the results of the other two completed wu's.

Code: Select all

[20:02:07] + Attempting to send results [June 15 20:02:07 UTC]
[20:02:07] - Reading file work/wuresults_00.dat from core
[20:02:07]   (Read 70355 bytes from disk)
[20:02:07] Connecting to http://171.65.103.100:8080/
[20:05:16] - Couldn't send HTTP request to server
[20:05:16] + Could not connect to Work Server (results)
[20:05:16]     (171.65.103.100:8080)
[20:05:16] + Retrying using alternative port
[20:05:16] Connecting to http://171.65.103.100:80/
[20:08:25] - Couldn't send HTTP request to server
[20:08:25] + Could not connect to Work Server (results)
[20:08:25]     (171.65.103.100:80)
[20:08:25]   Could not transmit unit 00 to Collection server; keeping in queue.
[20:08:25] + Sent 0 of 2 completed units to the server
[20:08:25] + Closed connections

That was after finishing the wu and successfully sending results for that wu to its server and also after receiving another assigned wu to start folding

Folding Forum

171.64.122.70

Re: 171.64.122.70

Re: 171.64.122.70

Re: 171.64.122.70

Re: 171.64.122.70

Re: 171.64.122.70

Re: 171.64.122.70

Re: 171.64.122.70

Re: 171.64.122.70

171.65.103.100 ports 80 and 8080 down

Re: 171.65.103.110 ports 80 and 8080 down

Re: 171.65.103.100 ports 80 and 8080 down

Re: 171.65.103.100 ports 80 and 8080 down

Re: 171.64.122.70

Re: 171.64.122.70

Re: 171.65.103.100 ports 80 and 8080 down