Page 2 of 3

Re: http://171.64.65.56:8080/ 503 status

Posted: Wed Feb 11, 2009 7:36 am
by 314159
Hate to double post but I just tried xx.56 (via browser) and did NOT receive an "OK".

Darn!

Re: http://171.64.65.56:8080/ 503 status

Posted: Wed Feb 11, 2009 10:55 am
by toTOW
Since the latest fixes on the server, you should not get OK anymore, but it should ask for a download instead (they changed the stream type from text to binary).

Re: http://171.64.65.56:8080/ 503 status

Posted: Wed Feb 11, 2009 1:50 pm
by Flathead74
toTOW wrote:Since the latest fixes on the server, you should not get OK anymore, but it should ask for a download instead (they changed the stream type from text to binary).
I checked just before I posted, and I still get a return of OK here.
:?:

Re: http://171.64.65.56:8080/ 503 status

Posted: Wed Feb 11, 2009 3:24 pm
by toTOW
I don't know ... this server might be running an old version ... or I misunderstood something and my statement only applies to AS ...

Re: http://171.64.65.56:8080/ 503 status

Posted: Mon May 25, 2009 9:43 am
by noorman
toTOW wrote:I don't know ... this server might be running an old version ... or I misunderstood something and my statement only applies to AS ...
.


Tried this on named server and it gave me an OK

Tried it on another and got the same result.

Tried it on this one: 171.64.65.106 (GPU vspg4v2) and that one gave me the 'download' window ...
I guess it 's only been implemented on the GPU servers (for now)/ correction: it is a rarity and right now an oddity (see later attempts)

Although, 171.64.65.20 still replies with OK (and that too is a GPU server)

171.64.65.103 does the download thingy, but its colleagues 171.64.65.102 and 171.64.65.96 just reply with OK (still) :?:


.

Re: http://171.64.65.56:8080/ 503 status

Posted: Mon May 25, 2009 7:03 pm
by bruce
The download window in place of the OK screen is a minor issue that will be fixed one of these days. The file being downloaded contains the "OK" message but the server gives it the wrong attributes so FF won't display it without downloading it first. If you use IE, the OK will display, which is probably why the bug wasn't fixed earlier.

Re: http://171.64.65.56:8080/ 503 status

Posted: Wed Jul 21, 2010 5:34 pm
by [Inpact]Terminou
Is the server has problem for the stats ? I have successfully uploaded a WU on it since 2H and 45 min and still no update ?

Re: http://171.64.65.56:8080/ 503 status

Posted: Wed Jul 21, 2010 5:40 pm
by susato
If you are checking on the EOC site, it may take more than 3 hours to post your point return for a completed project, because the data has to go first to the stats server and then from the stats server to the EOC server.

However, I think the server may indeed have an issue - was the problem WU a p6701 or p6702 unit? Are you missing any units completed yesterday that came from this server? Another donor reported a similar issue via email. Please post (or PM to me in either French or English) a copy of your queue and/or a FAHlog.txt excerpt showing the successful completion of the unit and its project/run/clone/generation numbers so that I can look it up in the WU database. Thanks!

Re: http://171.64.65.56:8080/ 503 status

Posted: Wed Jul 21, 2010 7:50 pm
by Mactin
susato wrote:I think the server may indeed have an issue - was the problem WU a p6701 or p6702 unit? Are you missing any units completed yesterday that came from this server?
I am missing two p6701's from this server.
The first completed at around 500U (14+ hours ago) and the other at 1100U (8+ hours ago).
The one before these two (a p6702) was completed (and credited correctly) at 1940U on July 19th.
The one before (a p6701) was completed (and credited correctly) at 1128U on July 19th.

Please dont give me another reason to dislike 6701/02 WUs :wink:

Re: http://171.64.65.56:8080/ 503 status

Posted: Wed Jul 21, 2010 10:51 pm
by [Inpact]Terminou
Yep, it was this afternoon at 14H30 local time and now we are 12:30 am (one day after) on a 6701 unit

Code: Select all

# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Folding@home\CPU client
Executable: D:\Folding@home\CPU client\Folding@home-Win32-x86.exe
Arguments: -smp -verbosity 9 

[06:00:52] - Ask before connecting: No
[06:00:52] - User name: [Inpact]Terminou (Team 51)
[06:00:52] - User ID: 4597A97187530EF
[06:00:52] - Machine ID: 1
[06:00:52] 
[06:00:53] Loaded queue successfully.
[06:00:53] 
[06:00:53] - Autosending finished units... [July 21 06:00:53 UTC]
[06:00:53] + Processing work unit
[06:00:53] Trying to send all finished work units
[06:00:53] Core required: FahCore_a3.exe
[06:00:53] + No unsent completed units remaining.
[06:00:53] Core found.
[06:00:53] - Autosend completed
[06:00:53] Working on queue slot 02 [July 21 06:00:53 UTC]
[06:00:53] + Working ...
[06:00:53] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 4 -checkpoint 3 -verbose -lifeline 3512 -version 629'

[06:00:58] 
[06:00:58] *------------------------------*
[06:00:58] Folding@Home Gromacs SMP Core
[06:00:58] Version 2.22 (Mar 12, 2010)
[06:00:58] 
[06:00:58] Preparing to commence simulation
[06:00:58] - Ensuring status. Please wait.
[06:01:08] - Looking at optimizations...
[06:01:08] - Working with standard loops on this execution.
[06:01:08] - Previous termination of core was improper.
[06:01:08] - Files status OK
[06:01:08] - Expanded 764136 -> 1404481 (decompressed 183.7 percent)
[06:01:08] Called DecompressByteArray: compressed_data_size=764136 data_size=1404481, decompressed_data_size=1404481 diff=0
[06:01:08] - Digital signature verified
[06:01:08] 
[06:01:08] Project: 6701 (Run 8, Clone 19, Gen 14)
[06:01:08] 
[06:01:08] Entering M.D.
[06:01:14] Using Gromacs checkpoints
[06:01:14] Resuming from checkpoint
[06:01:14] Verified work/wudata_02.log
[06:01:14] Verified work/wudata_02.trr
[06:01:15] Verified work/wudata_02.xtc
[06:01:15] Verified work/wudata_02.edr
[06:01:15] Completed 1088720 out of 2000000 steps  (54%)
.....

[12:04:54] Completed 1740000 out of 2000000 steps  (87%)
[12:16:01] Completed 1760000 out of 2000000 steps  (88%)
[12:27:07] Completed 1780000 out of 2000000 steps  (89%)
[12:38:12] Completed 1800000 out of 2000000 steps  (90%)
[12:49:20] Completed 1820000 out of 2000000 steps  (91%)
[13:00:27] Completed 1840000 out of 2000000 steps  (92%)
[13:11:36] Completed 1860000 out of 2000000 steps  (93%)
[13:22:44] Completed 1880000 out of 2000000 steps  (94%)
[13:33:51] Completed 1900000 out of 2000000 steps  (95%)
[13:45:00] Completed 1920000 out of 2000000 steps  (96%)
[13:56:08] Completed 1940000 out of 2000000 steps  (97%)
[14:07:19] Completed 1960000 out of 2000000 steps  (98%)
[14:18:26] Completed 1980000 out of 2000000 steps  (99%)
[14:29:33] Completed 2000000 out of 2000000 steps  (100%)
[14:29:33] DynamicWrapper: Finished Work Unit: sleep=10000
[14:29:44] 
[14:29:44] Finished Work Unit:
[14:29:44] - Reading up to 687408 from "work/wudata_02.trr": Read 687408
[14:29:44] trr file hash check passed.
[14:29:44] - Reading up to 42676084 from "work/wudata_02.xtc": Read 42676084
[14:29:44] xtc file hash check passed.
[14:29:44] edr file hash check passed.
[14:29:44] logfile size: 299412
[14:29:44] Leaving Run
[14:29:45] - Writing 43665240 bytes of core data to disk...
[14:29:46]   ... Done.
[14:29:47] - Shutting down core
[14:29:47] 
[14:29:47] Folding@home Core Shutdown: FINISHED_UNIT
[14:29:51] CoreStatus = 64 (100)
[14:29:51] Unit 2 finished with 82 percent of time to deadline remaining.
[14:29:51] Updated performance fraction: 0.892427
[14:29:51] Sending work to server
[14:29:51] Project: 6701 (Run 8, Clone 19, Gen 14)


[14:29:51] + Attempting to send results [July 21 14:29:51 UTC]
[14:29:51] - Reading file work/wuresults_02.dat from core
[14:29:51]   (Read 43665240 bytes from disk)
[14:29:51] Connecting to http://171.64.65.56:8080/
[14:36:34] Posted data.
[14:36:34] Initial: 0000; - Uploaded at ~105 kB/s
[14:36:35] - Averaged speed for that direction ~88 kB/s
[14:36:35] + Results successfully sent
[14:36:35] Thank you for your contribution to Folding@Home.
[14:36:35] + Number of Units Completed: 148

[14:36:40] Trying to send all finished work units
[14:36:40] + No unsent completed units remaining.
[14:36:40] - Preparing to get new work unit...
[14:36:40] Cleaning up work directory
[14:36:40] + Attempting to get work packet
[14:36:40] Passkey found
[14:36:40] - Will indicate memory of 4094 MB
[14:36:40] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 11
[14:36:40] - Connecting to assignment server
[14:36:40] Connecting to http://assign.stanford.edu:8080/
[14:36:42] Posted data.
[14:36:42] Initial: ED82; - Successful: assigned to (130.237.232.140).
[14:36:42] + News From Folding@Home: Welcome to Folding@Home
[14:36:42] Loaded queue successfully.
[14:36:42] Connecting to http://130.237.232.140:8080/
[14:36:42] Posted data.
[14:36:42] Initial: 0000; - Receiving payload (expected size: 1796985)
[14:36:45] - Downloaded at ~584 kB/s
[14:36:45] - Averaged speed for that direction ~391 kB/s
[14:36:45] + Received work.
[14:36:45] Trying to send all finished work units
[14:36:45] + No unsent completed units remaining.
[14:36:45] + Closed connections


Txs

Re: http://171.64.65.56:8080/ 503 status

Posted: Thu Jul 22, 2010 1:38 am
by tmossman01
I have had a similar issue with an update to that server not posting points.... Project 6701 (R71, C1, G21).... I have had this happen several times, but this is the latest (and the only one I can post an audit trail on.) I hope the WU update did not go to the great bit bucket.....

Code: Select all

[21:18:38] 
[21:18:38] Finished Work Unit:
[21:18:38] - Reading up to 687408 from "work/wudata_08.trr": Read 687408
[21:18:38] trr file hash check passed.
[21:18:38] - Reading up to 42746428 from "work/wudata_08.xtc": Read 42746428
[21:18:38] xtc file hash check passed.
[21:18:38] edr file hash check passed.
[21:18:38] logfile size: 280251
[21:18:38] Leaving Run
[21:18:43] - Writing 43716423 bytes of core data to disk...
[21:18:43]   ... Done.
[21:18:45] - Shutting down core
[21:18:45] 
[21:18:45] Folding@home Core Shutdown: FINISHED_UNIT
[21:18:48] CoreStatus = 64 (100)
[21:18:48] Unit 8 finished with 90 percent of time to deadline remaining.
[21:18:48] Updated performance fraction: 0.934942
[21:18:48] Sending work to server
[21:18:48] Project: 6701 (Run 71, Clone 1, Gen 21)


[21:18:48] + Attempting to send results [July 20 21:18:48 UTC]
[21:18:48]   (Read 43716423 bytes from disk)
[21:18:48] Connecting to http://171.64.65.56:8080/
[21:21:40] - Uploaded at ~248 kB/s
[21:21:40] - Averaged speed for that direction ~213 kB/s
[21:21:40] + Results successfully sent
[21:21:40] Thank you for your contribution to Folding@Home.
[21:21:40] + Number of Units Completed: 100

Re: http://171.64.65.56:8080/ 503 status

Posted: Thu Jul 22, 2010 6:05 am
by [Inpact]Terminou
[Inpact]Terminou wrote:Yep, it was this afternoon at 14H30 local time and now we are 12:30 am (one day after) on a 6701 unit

Code: Select all

# Windows SMP Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.29

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: D:\Folding@home\CPU client
Executable: D:\Folding@home\CPU client\Folding@home-Win32-x86.exe
Arguments: -smp -verbosity 9 

[06:00:52] - Ask before connecting: No
[06:00:52] - User name: [Inpact]Terminou (Team 51)
[06:00:52] - User ID: 4597A97187530EF
[06:00:52] - Machine ID: 1
[06:00:52] 
[06:00:53] Loaded queue successfully.
[06:00:53] 
[06:00:53] - Autosending finished units... [July 21 06:00:53 UTC]
[06:00:53] + Processing work unit
[06:00:53] Trying to send all finished work units
[06:00:53] Core required: FahCore_a3.exe
[06:00:53] + No unsent completed units remaining.
[06:00:53] Core found.
[06:00:53] - Autosend completed
[06:00:53] Working on queue slot 02 [July 21 06:00:53 UTC]
[06:00:53] + Working ...
[06:00:53] - Calling '.\FahCore_a3.exe -dir work/ -nice 19 -suffix 02 -np 4 -checkpoint 3 -verbose -lifeline 3512 -version 629'

[06:00:58] 
[06:00:58] *------------------------------*
[06:00:58] Folding@Home Gromacs SMP Core
[06:00:58] Version 2.22 (Mar 12, 2010)
[06:00:58] 
[06:00:58] Preparing to commence simulation
[06:00:58] - Ensuring status. Please wait.
[06:01:08] - Looking at optimizations...
[06:01:08] - Working with standard loops on this execution.
[06:01:08] - Previous termination of core was improper.
[06:01:08] - Files status OK
[06:01:08] - Expanded 764136 -> 1404481 (decompressed 183.7 percent)
[06:01:08] Called DecompressByteArray: compressed_data_size=764136 data_size=1404481, decompressed_data_size=1404481 diff=0
[06:01:08] - Digital signature verified
[06:01:08] 
[06:01:08] Project: 6701 (Run 8, Clone 19, Gen 14)
[06:01:08] 
[06:01:08] Entering M.D.
[06:01:14] Using Gromacs checkpoints
[06:01:14] Resuming from checkpoint
[06:01:14] Verified work/wudata_02.log
[06:01:14] Verified work/wudata_02.trr
[06:01:15] Verified work/wudata_02.xtc
[06:01:15] Verified work/wudata_02.edr
[06:01:15] Completed 1088720 out of 2000000 steps  (54%)
.....

[12:04:54] Completed 1740000 out of 2000000 steps  (87%)
[12:16:01] Completed 1760000 out of 2000000 steps  (88%)
[12:27:07] Completed 1780000 out of 2000000 steps  (89%)
[12:38:12] Completed 1800000 out of 2000000 steps  (90%)
[12:49:20] Completed 1820000 out of 2000000 steps  (91%)
[13:00:27] Completed 1840000 out of 2000000 steps  (92%)
[13:11:36] Completed 1860000 out of 2000000 steps  (93%)
[13:22:44] Completed 1880000 out of 2000000 steps  (94%)
[13:33:51] Completed 1900000 out of 2000000 steps  (95%)
[13:45:00] Completed 1920000 out of 2000000 steps  (96%)
[13:56:08] Completed 1940000 out of 2000000 steps  (97%)
[14:07:19] Completed 1960000 out of 2000000 steps  (98%)
[14:18:26] Completed 1980000 out of 2000000 steps  (99%)
[14:29:33] Completed 2000000 out of 2000000 steps  (100%)
[14:29:33] DynamicWrapper: Finished Work Unit: sleep=10000
[14:29:44] 
[14:29:44] Finished Work Unit:
[14:29:44] - Reading up to 687408 from "work/wudata_02.trr": Read 687408
[14:29:44] trr file hash check passed.
[14:29:44] - Reading up to 42676084 from "work/wudata_02.xtc": Read 42676084
[14:29:44] xtc file hash check passed.
[14:29:44] edr file hash check passed.
[14:29:44] logfile size: 299412
[14:29:44] Leaving Run
[14:29:45] - Writing 43665240 bytes of core data to disk...
[14:29:46]   ... Done.
[14:29:47] - Shutting down core
[14:29:47] 
[14:29:47] Folding@home Core Shutdown: FINISHED_UNIT
[14:29:51] CoreStatus = 64 (100)
[14:29:51] Unit 2 finished with 82 percent of time to deadline remaining.
[14:29:51] Updated performance fraction: 0.892427
[14:29:51] Sending work to server
[14:29:51] Project: 6701 (Run 8, Clone 19, Gen 14)


[14:29:51] + Attempting to send results [July 21 14:29:51 UTC]
[14:29:51] - Reading file work/wuresults_02.dat from core
[14:29:51]   (Read 43665240 bytes from disk)
[14:29:51] Connecting to http://171.64.65.56:8080/
[14:36:34] Posted data.
[14:36:34] Initial: 0000; - Uploaded at ~105 kB/s
[14:36:35] - Averaged speed for that direction ~88 kB/s
[14:36:35] + Results successfully sent
[14:36:35] Thank you for your contribution to Folding@Home.
[14:36:35] + Number of Units Completed: 148

[14:36:40] Trying to send all finished work units
[14:36:40] + No unsent completed units remaining.
[14:36:40] - Preparing to get new work unit...
[14:36:40] Cleaning up work directory
[14:36:40] + Attempting to get work packet
[14:36:40] Passkey found
[14:36:40] - Will indicate memory of 4094 MB
[14:36:40] - Detect CPU. Vendor: GenuineIntel, Family: 6, Model: 15, Stepping: 11
[14:36:40] - Connecting to assignment server
[14:36:40] Connecting to http://assign.stanford.edu:8080/
[14:36:42] Posted data.
[14:36:42] Initial: ED82; - Successful: assigned to (130.237.232.140).
[14:36:42] + News From Folding@Home: Welcome to Folding@Home
[14:36:42] Loaded queue successfully.
[14:36:42] Connecting to http://130.237.232.140:8080/
[14:36:42] Posted data.
[14:36:42] Initial: 0000; - Receiving payload (expected size: 1796985)
[14:36:45] - Downloaded at ~584 kB/s
[14:36:45] - Averaged speed for that direction ~391 kB/s
[14:36:45] + Received work.
[14:36:45] Trying to send all finished work units
[14:36:45] + No unsent completed units remaining.
[14:36:45] + Closed connections


Txs

i have been credited with 2756 points. Txs

Re: http://171.64.65.56:8080/ 503 status

Posted: Thu Jul 22, 2010 7:33 am
by kasson
There was a problem with the server that resulted in
1) strange serverstat messages
2) failure for credits to register in the stats system, though they were recorded

fixing the server caused the stats system to update and serverstat to correct. The delayed credits should now be posted; please let us (or susato) know if not.

Re: http://171.64.65.56:8080/ 503 status

Posted: Thu Jul 22, 2010 10:25 am
by Mactin
kasson wrote:The delayed credits should now be posted; please let us (or susato) know if not.
Not for me, for both.
(p6701-r2-c22-r25 and p6701-r94-c41-g2)

Re: http://171.64.65.56:8080/ 503 status

Posted: Thu Jul 22, 2010 12:06 pm
by susato
In the mods' WU db I do not see credits for any of the three WU cited in the last two posts, nor the one reported by tmossman01, nor those reported by 314159. Current time 08:14 EDT = 05:14 PDT = 12:16 UTC

Moreover, no results have been returned for the succeeding generations of these WU, suggesting that these trajectories are still stalled and may need to be restarted by the researchers.

[Inpact]Terminou:
Project: 6701 (Run 8, Clone 19, Gen 14)

mactin:
Project: 6701 (Run 2, Clone 22, Gen 25)
Project: 6701 (Run 94, Clone 41, Gen 2)

tmossman01:
Project: 6701 (Run 71, Clone 1, Gen 21)

314159:
Project: 6701 (Run 47, Clone 46, Gen 1)
Project: 6701 (Run 25, Clone 25, Gen 16)
Project: 6702 (Run 9, Clone 21, Gen 3)
Project: 6701 (Run 50, Clone 21, Gen 17)

Terminou, the points you acknowledged above probably come from this other unit:

Code: Select all

Project 6012, Run 0, Clone 197, Gen 221

Donator: [Inpact]Terminou Team: 51
CPUId: 0058XXXXXXXXXXXXF0
Credit: 2756.08 Credit Time: 2010-07-21 16:09:39
Entered into logs at: 2010-07-21 16:09:18
WU assigned to donor at: 2010-07-21 07:36:45
Days taken to complete WU: 0.36
Error code: 0

Hi [Inpact]Terminou (team 51),
Your WU (P6012 R0 C197 G221) was added to the stats database on 2010-07-21 16:09:39 for 2756.08 points of credit.
Edited to add a few more for the record, from posts in the "Problems with a specific WU" thread:

poiuyut: Project: 6702 (Run 2, Clone 3, Gen 15)
Slythern: Project: 6701 (Run 19, Clone 24, Gen 28)
Datsun 1600: Project 6701 (Run 66, Clone 32, Gen 7)
tzutzy: Project: 6701 (Run 42, Clone 34, Gen 18)

The PG has fixed the server problem and the recredits are on their to-do list.