GPU WU Crashes every time at around 3%

Moderators: Site Moderators, FAHC Science Team

PantherX
Site Moderator
Posts: 6986
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:

Re: GPU WU Crashes every time at around 3%

Post by PantherX »

peterjammo wrote:...I have 2 usernames on the go - when I set up the second one I wasn't sure if I could do multiple machines so played it safe. Can I use the same passkey with both, or should I change the second user name to match the other 4?
I personally always use the same username and passkey across all my systems. That way, all the points are tied to one identity. However, some donors keep the same passkey but change their username so that they can track how their individual machines are performing. Do note that if you choose to use the same passkey but different usernames, each combination of username and passkey will need to qualify for the bonus points.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
NuovaApe
Posts: 53
Joined: Mon Jun 17, 2019 12:49 pm

Re: GPU WU Crashes every time at around 3%

Post by NuovaApe »

peterjammo wrote:On the heat stuff, the gpu has a freshly cleaned and pasted twin fan MSI Frozr ii cooler. The fan speed mentioned is for the two gpu fans. CPU fins are running between 1950 and 2070rpm, cpu temp maxes out at around 62c. As above GPU temp maxed out at 53c, wouldn't preclude any temp issues? Case is decent sized with a clean filtered rear bottom entry and a decent sized fan at the top of the rear. Intake air comes past the GPU first and past the cpu on the way out. Case and exit air isn't particularly warm.
I'm being a numpty - didn't check your most recent log, which makes me concur with Panther/Halo regarding GPU suitability.

Code: Select all

19:53:49:WU01:FS00:0xa7:Completed 7500 out of 250000 steps (3%)
a7 is the CPU core and it's at 3% and not failing.

Code: Select all

19:53:48:WU00:FS01:0x22:Completed 0 out of 2000000 steps (0%)
19:55:23:WU00:FS01:0x22:Bad State detected... attempting to resume from last good checkpoint. Is your system overclocked?
22 is the OpenMM GPU core and it's failing < 1%.

Your card predates my previous RX480 which had infrequent but similar issues with certain WUs - it'd fail repeatedly and the WU would get handed off to someone else. At least, like yours, it failed early. gen+1 can't start until gen completes, as I understand it.

I've not picked up GPU work for days. I am munching through a lot of CPU covid stuff though. Every little helps with this horrible pandemic. First time in my life I've ever written that p word. Truly sobering.
peterjammo
Posts: 90
Joined: Wed Mar 25, 2020 1:19 pm

Re: GPU WU Crashes every time at around 3%

Post by peterjammo »

foldy wrote:I also got bad state detected at 3% once with this project Project 11748 while other projects work without issues.
viewtopic.php?f=19&t=34244
Looks like my most recent failed wu has been reissued and failed for someone else now - if I'm reading this right.

https://apps.foldingathome.org/wu#proje ... 1537&gen=2

Wish I could check the 3rd wu that failed now. I went to look at saved logs, and there was no directory for them. Assuming that it may be hidden I clicked the view hidden button. Windows then ran a 5 minute process which appears to have either damaged or deleted the user. Rebooted in safe mode to try to recover, only to discover that my bluetooth keyboard isn't recognised in safe mode so I can't recover. Rebooted again, and it's now decided that it'll install the mother of all updates. 1 hr in its at 23% and still moving. I'm not hopeful of recovering the situation without a reinsatall.
peterjammo
Posts: 90
Joined: Wed Mar 25, 2020 1:19 pm

Re: GPU WU Crashes every time at around 3%

Post by peterjammo »

NuovaApe wrote:I've not picked up GPU work for days. I am munching through a lot of CPU covid stuff though. Every little helps with this horrible pandemic. First time in my life I've ever written that p word. Truly sobering.
Does seem that there's absolutely no shortage of gpu resources, so I'll be happy to carry on with the CPU stuff, if I can get this Windows problem sorted. Did I ever mention how much I don't miss WIndows since moving over to Linux about 3 years ago......... If I was sure there was nothing important on the HDD, It'd be wiped and Minty fresh by now. Pity I don't have a spare desktop HDD or a convertor.
PantherX
Site Moderator
Posts: 6986
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:

Re: GPU WU Crashes every time at around 3%

Post by PantherX »

peterjammo wrote:...Looks like my most recent failed wu has been reissued and failed for someone else now - if I'm reading this right.

https://apps.foldingathome.org/wu#proje ... 1537&gen=2...
This is what I see:

Code: Select all

User 	     Team   CPUID 	           Credit 	  Assigned 	           Returned 	           Credited 	           Days 	 Code
PeterJammo 	 0 	35F885EB4FFDFB3 	 26.49 	   2020-04-10 19:59:30 	2020-04-10 20:02:02 	2020-04-10 20:01:37 	0.002 	Faulty 2
NJarek 	247734 	9325825E2E6B8275 	84,511.5 	2020-04-10 20:39:49 	2020-04-11 13:02:03 	2020-04-11 13:01:32 	0.682 	Ok
It tells me that the WU failed for PeterJammo but was successfully completed by NJarek.
peterjammo wrote:... I went to look at saved logs, and there was no directory for them. Assuming that it may be hidden I clicked the view hidden button...
The last 16 logs should be present here by default:
C:\Users\Ryan\AppData\Roaming\FAHClient\logs
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Post Reply