Folding Forum

Posted: **Fri Jun 08, 2012 6:52 pm**

HardwareDecoder wrote:do you have any other ideas? because afaik and about 99.9% certainty there is nothing wrong with my card.

I don't think it's the card either... I'm definitely running out of easy answers... hard ones take longer.

Posted: **Fri Jun 08, 2012 6:55 pm**

haha ok well I guess i'll go play max payne 3 i'll check back here later thx for the help :-]

Posted: **Fri Jun 08, 2012 11:07 pm**

Sorry, I got nothing at this point. It should just work, after making those changes.

I'll let it stew overnight, see if anything comes up. Also, there are a lot of GPU experts here, so we'll see if they see something I don't see. Saw.

Posted: **Sat Jun 09, 2012 12:17 am**

are you guys sure this isn't another case of p7640 units failing in the wild??

Posted: **Sat Jun 09, 2012 1:20 am**

Stew is done. jim ate it.

HWD, please quit the client for a day. This beta project will be well tested and gone soon. This is a known issue as part of testing. Start up the client again tomorrow, hopefully gone by then, and it will start folding normally.

Posted: **Sat Jun 09, 2012 1:43 am**

tjlane said: Since these WUs have dumped themselves in the past, however, and not returned properly to our servers here, I think this file may stay on donor's computers - if that's the case, then I'll be in touch to get those files via email!

maybe he should get in touch with tjlane. a PM possibly?? tjlane said he wanted some of these units that fail in the wild.

Posted: **Sat Jun 09, 2012 9:34 am**

Do not use the beta flag. All beta assignments have a high risk of failure.
If you use that setting you should join the betateam and participate in that forum

Posted: **Sat Jun 09, 2012 2:14 pm**

yea its working now, and I thought you had to use the beta flag to get the 670 to work. I'll try without it. the PPD seems low around 15,000.

Posted: **Sat Jun 09, 2012 4:17 pm**

At first, beta setting was needed for keplers to fold. Those newer projects will eventually move to regular folding, as it appears to have done now.

Posted: **Sat Jun 09, 2012 4:20 pm**

cores still not optimized though i don't think so you may still experience low ppd.

Posted: **Tue Jun 26, 2012 9:19 pm**

I am having a similar problem. Here is the log:

Code: Select all

*********************** Log Started 2012-06-26T21:05:29Z ***********************
21:05:29:************************* Folding@home Client *************************
21:05:29:      Website: http://folding.stanford.edu/
21:05:29:    Copyright: (c) 2009-2012 Stanford University
21:05:29:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
21:05:29:         Args: --lifeline 7040 --command-port=36330
21:05:29:       Config: C:/Users/Deadbeard/AppData/Roaming/FAHClient/config.xml
21:05:29:******************************** Build ********************************
21:05:29:      Version: 7.1.52
21:05:29:         Date: Mar 20 2012
21:05:29:         Time: 19:37:42
21:05:29:      SVN Rev: 3515
21:05:29:       Branch: fah/trunk/client
21:05:29:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
21:05:29:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
21:05:29:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT
21:05:29:     Platform: win32 XP
21:05:29:         Bits: 32
21:05:29:         Mode: Release
21:05:29:******************************* System ********************************
21:05:29:          CPU: AMD Phenom(tm) II X4 975 Processor
21:05:29:       CPU ID: AuthenticAMD Family 16 Model 4 Stepping 3
21:05:29:         CPUs: 4
21:05:29:       Memory: 8.00GiB
21:05:29:  Free Memory: 5.27GiB
21:05:29:      Threads: WINDOWS_THREADS
21:05:29:   On Battery: false
21:05:29:   UTC offset: -5
21:05:29:          PID: 5152
21:05:29:          CWD: C:/Users/Deadbeard/AppData/Roaming/FAHClient
21:05:29:           OS: Windows 7 Ultimate
21:05:29:      OS Arch: AMD64
21:05:29:         GPUs: 2
21:05:29:        GPU 0: FERMI:1 GK104 [Geforce GTX680]
21:05:29:        GPU 1: FERMI:1 GK107 [GeForce GTX 670]
21:05:29:         CUDA: 3.0
21:05:29:  CUDA Driver: 4020
21:05:29:Win32 Service: false
21:05:29:***********************************************************************
21:05:30:<config>
21:05:30:  <!-- Folding Slot Configuration -->
21:05:30:  <gpu v='true'/>
21:05:30:  <smp v='false'/>
21:05:30:
21:05:30:  <!-- Network -->
21:05:30:  <proxy v=':8080'/>
21:05:30:
21:05:30:  <!-- User Information -->
21:05:30:  <team v='111065'/>
21:05:30:  <user v='Deadbeard'/>
21:05:30:
21:05:30:  <!-- Folding Slots -->
21:05:30:  <slot id='0' type='GPU'/>
21:05:30:  <slot id='1' type='GPU'/>
21:05:30:</config>
21:05:30:Trying to access database...
21:05:30:Successfully acquired database lock
21:05:30:Enabled folding slot 00: READY gpu:0:"GK104 [Geforce GTX680]"
21:05:30:Enabled folding slot 01: READY gpu:1:"GK107 [GeForce GTX 670]"
21:05:30:WU00:FS00:Starting
21:05:30:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Deadbeard/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 00 -suffix 01 -version 701 -lifeline 5152 -checkpoint 15 -gpu 0
21:05:30:WU00:FS00:Started FahCore on PID 6232
21:05:30:WU00:FS00:Core PID:5488
21:05:30:WU00:FS00:FahCore 0x15 started
21:05:30:WU01:FS01:Starting
21:05:30:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Deadbeard/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -version 701 -lifeline 5152 -checkpoint 15 -gpu 1
21:05:30:WU01:FS01:Started FahCore on PID 7080
21:05:30:WU01:FS01:Core PID:224
21:05:30:WU01:FS01:FahCore 0x15 started
21:05:30:WU00:FS00:0x15:
21:05:30:WU00:FS00:0x15:*------------------------------*
21:05:30:WU00:FS00:0x15:Folding@Home GPU Core
21:05:30:WU00:FS00:0x15:Version                2.22 (Thu Dec 8 17:08:05 PST 2011)
21:05:30:WU00:FS00:0x15:Build host             SimbiosNvdWin7
21:05:30:WU00:FS00:0x15:Board Type             NVIDIA/CUDA
21:05:30:WU00:FS00:0x15:Core                   15
21:05:30:WU00:FS00:0x15:
21:05:30:WU00:FS00:0x15:Window's signal control handler registered.
21:05:30:WU00:FS00:0x15:Preparing to commence simulation
21:05:30:WU00:FS00:0x15:- Looking at optimizations...
21:05:30:WU00:FS00:0x15:- Files status OK
21:05:30:WU00:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
21:05:30:WU00:FS00:0x15:- Expanded 67123 -> 287498 (decompressed 428.3 percent)
21:05:30:WU00:FS00:0x15:Called DecompressByteArray: compressed_data_size=67123 data_size=287498, decompressed_data_size=287498 diff=0
21:05:30:WU00:FS00:0x15:- Digital signature verified
21:05:30:WU00:FS00:0x15:
21:05:30:WU00:FS00:0x15:Project: 8007 (Run 5, Clone 15, Gen 134)
21:05:30:WU00:FS00:0x15:
21:05:30:WU00:FS00:0x15:Assembly optimizations on if available.
21:05:30:WU00:FS00:0x15:Entering M.D.
21:05:30:WU01:FS01:0x15:
21:05:30:WU01:FS01:0x15:*------------------------------*
21:05:30:WU01:FS01:0x15:Folding@Home GPU Core
21:05:30:WU01:FS01:0x15:Version                2.22 (Thu Dec 8 17:08:05 PST 2011)
21:05:30:WU01:FS01:0x15:Build host             SimbiosNvdWin7
21:05:30:WU01:FS01:0x15:Board Type             NVIDIA/CUDA
21:05:30:WU01:FS01:0x15:Core                   15
21:05:30:WU01:FS01:0x15:GPU device info vendor=0 device=0 name=NA match=0 deviceId=1
21:05:30:WU01:FS01:0x15:
21:05:30:WU01:FS01:0x15:Window's signal control handler registered.
21:05:30:WU01:FS01:0x15:Preparing to commence simulation
21:05:30:WU01:FS01:0x15:- Looking at optimizations...
21:05:30:WU01:FS01:0x15:- Files status OK
21:05:30:WU01:FS01:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
21:05:30:WU01:FS01:0x15:- Expanded 146135 -> 660962 (decompressed 452.2 percent)
21:05:30:WU01:FS01:0x15:Called DecompressByteArray: compressed_data_size=146135 data_size=660962, decompressed_data_size=660962 diff=0
21:05:30:WU01:FS01:0x15:- Digital signature verified
21:05:30:WU01:FS01:0x15:
21:05:30:WU01:FS01:0x15:Project: 8019 (Run 2, Clone 45, Gen 88)
21:05:30:WU01:FS01:0x15:
21:05:30:WU01:FS01:0x15:Assembly optimizations on if available.
21:05:30:WU01:FS01:0x15:Entering M.D.
21:05:32:WU00:FS00:0x15:Tpr hash 00/wudata_01.tpr:  3133978145 2981217869 3896984108 767750582 274082328
21:05:32:WU00:FS00:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
21:05:32:WU00:FS00:0x15:Working on Gyas ROwers Mature At Cryogenic Speed
21:05:32:WU00:FS00:0x15:Client config unavailable.
21:05:32:WU01:FS01:0x15:Tpr hash 01/wudata_01.tpr:  3851052761 535723345 1573622130 4204980790 2285242735
21:05:32:WU01:FS01:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
21:05:32:WU01:FS01:0x15:Working on Protein
21:05:32:WU01:FS01:0x15:Client config unavailable.
21:05:32:WU00:FS00:0x15:Starting GUI Server
21:05:32:WU01:FS01:0x15:Starting GUI Server
21:05:33:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1

Ran for about 16 hours so far, and no progress.

Posted: **Wed Jun 27, 2012 2:14 am**

The GPU FahCores must be updated (and validated) to work correctly with Kepler GPUs and Kepler Drivers. The Pande Group is working to provide support GK104/GK107 hardware but that process isn't finished yet.

Posted: **Sun Sep 09, 2012 10:13 pm**

Having same issues with ASUS branded GTX660 Ti. After updating the GPUs.txt it now finds the GPU and loads a work unit but stays at 0%. Running Stock Specs and ASUS "GPU Tweak" reports 0% GPU load. This GPU is replacing an ASUS branded GTX560 Ti which runs in same unit fine and 100% GPU usage rate.

Tried 7im's suggestions and I get nothing either. Not sure what's next.

Here is Sys Info Dump:

Code: Select all

22:02:44:      Website: http://folding.stanford.edu/
22:02:44:    Copyright: (c) 2009-2012 Stanford University
22:02:44:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
22:02:44:         Args: --lifeline 4248 --command-port=36330
22:02:44:       Config: C:/Users/Scott2/AppData/Roaming/FAHClient/config.xml
22:02:44:******************************** Build ********************************
22:02:44:      Version: 7.1.52
22:02:44:         Date: Mar 20 2012
22:02:44:         Time: 19:37:42
22:02:44:      SVN Rev: 3515
22:02:44:       Branch: fah/trunk/client
22:02:44:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
22:02:44:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
22:02:44:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT
22:02:44:     Platform: win32 XP
22:02:44:         Bits: 32
22:02:44:         Mode: Release
22:02:44:******************************* System ********************************
22:02:44:          CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
22:02:44:       CPU ID: GenuineIntel Family 6 Model 58 Stepping 9
22:02:44:         CPUs: 8
22:02:44:       Memory: 15.96GiB
22:02:44:  Free Memory: 13.70GiB
22:02:44:      Threads: WINDOWS_THREADS
22:02:44:   On Battery: false
22:02:44:   UTC offset: -4
22:02:44:          PID: 3816
22:02:44:          CWD: C:/Users/Scott2/AppData/Roaming/FAHClient
22:02:44:           OS: Windows 7 Professional
22:02:44:      OS Arch: AMD64
22:02:44:         GPUs: 1
22:02:44:        GPU 0: NVIDIA:3 GK104 [GeForce GTX 660 Ti]
22:02:44:         CUDA: 3.0
22:02:44:  CUDA Driver: 5000
22:02:44:Win32 Service: false

Posted: **Mon Sep 10, 2012 3:03 am**

The FAHcore for the Kepler GPU's is still in beta testing. You can read what has been posted by searching for Kepler. If you are interested in beta testing with this GPU, read the policies that need to be followed and apply if you are willing to follow them.

viewtopic.php?f=16&t=8

Folding Forum

GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%

Re: GTX 670 stays at 0%