Page 2 of 3
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Wed Nov 16, 2011 9:46 am
by Meh_Lay_Lay
My 5 projects are still waiting to be uploaded now, and I'll get back to u guys if anything changes
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Wed Nov 16, 2011 7:01 pm
by dvanatta
jackamo wrote:Meh_lay_lay...I've been having issues for over 3 weeks...still can't download anything. I've been in idle. Just patiently waiting for things to be fixed.
Hi jackamo,
Thanks for your patience. We're still not sure why you're having trouble, have you tried reinstalling your client? As far as I can tell this is a client side issue. Also, this does not seem to be the same error as Meh_Lay_Lay, though it's interesting that it involves the same server.
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Wed Nov 16, 2011 7:05 pm
by dvanatta
Meh_Lay_Lay wrote:I couldn't upload any of my finished projects the past 2 days, and now have 5 projects that can't send and 1 that's folding. Is there something wrong with the servers? In that case, should I stop folding for now so that I don't download and expire/waste the projects? Basically, it just keeps saying the connection was actively refused. It does happen to me once in a while but usually a few hours later it would be uploaded. Not this time... and for all my projects too
Do you have any projects other than 72XX? I'll look into why this server is rejecting your work units
-Dan
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Thu Nov 17, 2011 9:05 am
by Meh_Lay_Lay
dvanatta wrote:Meh_Lay_Lay wrote:I couldn't upload any of my finished projects the past 2 days, and now have 5 projects that can't send and 1 that's folding. Is there something wrong with the servers? In that case, should I stop folding for now so that I don't download and expire/waste the projects? Basically, it just keeps saying the connection was actively refused. It does happen to me once in a while but usually a few hours later it would be uploaded. Not this time... and for all my projects too
Do you have any projects other than 72XX? I'll look into why this server is rejecting your work units
-Dan
oh wow, all 5 of those projects are 7200s D: I've continued my folding and I have been able to upload the most recent 2 btw.
btw, how do I add the -sendall flag to my fah? Do I need to use the console version or something?
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Thu Nov 17, 2011 4:05 pm
by bruce
The -sendall flag will not help you. The client automatically sends results periodically. Apparently there was a problem with the server, and if that's true, there's nothing you can do to get them to send.
If you are not happy with how frequently the client attempts to send them, just restart the client. All the -send all flag does is tell the client that after you restart, you want the client to shut itself down after it tries to send. A simple restart makes the same attempt to send but also continues folding the current WU.
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Mon Nov 21, 2011 3:35 pm
by jackamo
dvanatta wrote:jackamo wrote:
Hi jackamo,
Thanks for your patience. We're still not sure why you're having trouble, have you tried reinstalling your client? As far as I can tell this is a client side issue. Also, this does not seem to be the same error as Meh_Lay_Lay, though it's interesting that it involves the same server.
Yes sir...I've uninstalled and reinstalled 3 times. I've stopped and restarted my client and I've tried to use different switches, all to no avail. I'm at a loss...
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Tue Nov 22, 2011 12:39 am
by bruce
Let's see if we can clarify the issues a little more.
The topic is about 129.64.95.82 AND it's about problems with uploading. Questions about other servers should be in a different topic and dvanatta can't fix those problems.
Also, I really doubt you're having trouble downloading from that sever. It has no work and is set to accept only so your client should NOT be trying to download from it. That's not a problem, though because the Assignment Server should be redirecting all download request to some other server. Please post a fresh log showing a recent attempt to download.
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Tue Nov 22, 2011 8:48 am
by Meh_Lay_Lay
Btw, I'm not getting any "project info" either. Dunno if that's related?
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Tue Nov 22, 2011 3:32 pm
by jackamo
bruce wrote:Let's see if we can clarify the issues a little more.
The topic is about 129.64.95.82 AND it's about problems with uploading. Questions about other servers should be in a different topic and dvanatta can't fix those problems.
Also, I really doubt you're having trouble downloading from that sever. It has no work and is set to accept only so your client should NOT be trying to download from it. That's not a problem, though because the Assignment Server should be redirecting all download request to some other server. Please post a fresh log showing a recent attempt to download.
Well Bruce, you are behind the power curve. First, take a look at the original post, it was about not being able to download. Second, you the forum moderator combined another topic into my post. AND I am having problems downloading from this server. I have not been able to get any WU's for a month.
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Tue Nov 22, 2011 3:46 pm
by gwildperson
Meh_Lay_Lay wrote:Btw, I'm not getting any "project info" either. Dunno if that's related?
Yes, both are probably symptoms of a single problem, but your problem is not the same problem as the earlier topics in this thread. We need your log so we can help you with your problem. As Bruce said, you need to post your log. If you're running Windows, go to the start menu and inside of the all programs selection, choose FAHClient and then Data Directory. You probably can't post all of the log file, but start with the beginning, if necessary you can skip the repetitive parts in the middle, and get the last part. The log you posted on the previous page doesn't cover this new problem.
jackamo: Same questions. As long as you're talking about server 129.64.95.82, you'll get attention here. The forum is "Issues with a specific server" and the topic should be just about 129.64.95.82. If you're talking about all servers or some other specific server, I'm sure we can get one of the Mods to split your part of the discussion into a topic that can get the attention it needs.
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Tue Nov 22, 2011 4:07 pm
by Meh_Lay_Lay
Btw, I am downloading new projects without problem, just keep failing on upload. Here's my log:
Code: Select all
*********************** Log Started 2011-11-15T10:26:28 ************************
10:26:28:************************* Folding@home Client *************************
10:26:28: Website: http://folding.stanford.edu/
10:26:28: Copyright: (c) 2009-2011 Stanford University
10:26:28: Author: Joseph Coffland <joseph@cauldrondevelopment.com>
10:26:28: Args: --lifeline 3700 --command-port=36330
10:26:28: Config: C:/Users/Gary/AppData/Roaming/FAHClient/config.xml
10:26:28:******************************** Build ********************************
10:26:28: Version: 7.1.38
10:26:28: Date: Oct 6 2011
10:26:28: Time: 19:57:04
10:26:28: SVN Rev: 3080
10:26:28: Branch: fah/trunk/client
10:26:28: Compiler: Intel(R) C++ MSVC 1500 mode 1200
10:26:28: Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
10:26:28: /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT
10:26:28: Platform: win32 XP
10:26:28: Bits: 32
10:26:28: Mode: Release
10:26:28:******************************* System ********************************
10:26:28: CPU: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz
10:26:28: CPU ID: GenuineIntel Family 6 Model 42 Stepping 7
10:26:28: CPUs: 4
10:26:28: Memory: 3.98GiB
10:26:28: Free Memory: 2.26GiB
10:26:28: Threads: WINDOWS_THREADS
10:26:28: On Battery: false
10:26:28: UTC offset: 8
10:26:28: PID: 5020
10:26:28: CWD: C:/Users/Gary/AppData/Roaming/FAHClient
10:26:28: OS: Windows 7 Ultimate
10:26:28: OS Arch: AMD64
10:26:28: GPUs: 1
10:26:28: GPU 0: ATI:4 Cayman PRO [AMD Radeon 6900 Series]
10:26:28: CUDA: Not detected
10:26:28:Win32 Service: false
10:26:28:***********************************************************************
10:26:28:<config>
10:26:28: <service-description v='Folding@home Client'/>
10:26:28: <service-restart v='true'/>
10:26:28: <service-restart-delay v='5000'/>
10:26:28:
10:26:28: <!-- Client Control -->
10:26:28: <cycle-rate v='4'/>
10:26:28: <cycles v='-1'/>
10:26:28: <data-directory v='.'/>
10:26:28: <disable-project-lookup v='false'/>
10:26:28: <exec-directory v='C:\Program Files (x86)\FAHClient'/>
10:26:28: <exit-when-done v='false'/>
10:26:28: <threads v='4'/>
10:26:28:
10:26:28: <!-- Configuration -->
10:26:28: <config-rotate v='true'/>
10:26:28: <config-rotate-dir v='configs'/>
10:26:28: <config-rotate-max v='16'/>
10:26:28:
10:26:28: <!-- Debugging -->
10:26:28: <assignment-servers>
10:26:28: assign3.stanford.edu:8080 assign4.stanford.edu:80
10:26:28: </assignment-servers>
10:26:28: <capture-directory v='capture'/>
10:26:28: <capture-sockets v='false'/>
10:26:28: <debug-sockets v='false'/>
10:26:28: <exception-locations v='true'/>
10:26:28: <gpu-assignment-servers>
10:26:28: assign-GPU.stanford.edu:80 assign-GPU.stanford.edu:8080
10:26:28: </gpu-assignment-servers>
10:26:28: <stack-traces v='false'/>
10:26:28:
10:26:28: <!-- Error Handling -->
10:26:28: <max-slot-errors v='5'/>
10:26:28: <max-unit-errors v='5'/>
10:26:28:
10:26:28: <!-- FahCore Control -->
10:26:28: <checkpoint v='3'/>
10:26:28: <core-dir v='cores'/>
10:26:28: <core-priority v='low'/>
10:26:28: <cpu-affinity v='false'/>
10:26:28: <cpu-usage v='100'/>
10:26:28: <no-assembly v='false'/>
10:26:28:
10:26:28: <!-- Folding Slot Configuration -->
10:26:28: <client-subtype v='STDCLI'/>
10:26:28: <client-type v='normal'/>
10:26:28: <cpu-species v='X86_PENTIUM_II'/>
10:26:28: <cpu-type v='AMD64'/>
10:26:28: <cpus v='-1'/>
10:26:28: <cuda-index v='0'/>
10:26:28: <gpu v='true'/>
10:26:28: <gpu-usage v='100'/>
10:26:28: <max-packet-size v='normal'/>
10:26:28: <opencl-index v='0'/>
10:26:28: <os-species v='UNKNOWN'/>
10:26:28: <os-type v='WIN32'/>
10:26:28: <project-key v='0'/>
10:26:28: <smp v='true'/>
10:26:28:
10:26:28: <!-- Logging -->
10:26:28: <log v='log.txt'/>
10:26:28: <log-color v='false'/>
10:26:28: <log-crlf v='true'/>
10:26:28: <log-date v='false'/>
10:26:28: <log-debug v='true'/>
10:26:28: <log-domain v='false'/>
10:26:28: <log-header v='true'/>
10:26:28: <log-level v='true'/>
10:26:28: <log-no-info-header v='true'/>
10:26:28: <log-redirect v='false'/>
10:26:28: <log-rotate v='true'/>
10:26:28: <log-rotate-dir v='logs'/>
10:26:28: <log-rotate-max v='16'/>
10:26:28: <log-short-level v='false'/>
10:26:28: <log-simple-domains v='true'/>
10:26:28: <log-thread-id v='false'/>
10:26:28: <log-time v='true'/>
10:26:28: <log-to-screen v='true'/>
10:26:28: <log-truncate v='false'/>
10:26:28: <verbosity v='5'/>
10:26:28:
10:26:28: <!-- Network -->
10:26:28: <proxy v=':8080'/>
10:26:28: <proxy-enable v='false'/>
10:26:28: <proxy-pass v=''/>
10:26:28: <proxy-user v=''/>
10:26:28:
10:26:28: <!-- Process Control -->
10:26:28: <child v='false'/>
10:26:28: <daemon v='false'/>
10:26:28: <pid v='false'/>
10:26:28: <pid-file v='Folding@home Client.pid'/>
10:26:28: <respawn v='false'/>
10:26:28: <service v='false'/>
10:26:28:
10:26:28: <!-- Remote Command Server -->
10:26:28: <command-address v='0.0.0.0'/>
10:26:28: <command-allow v='127.0.0.1'/>
10:26:28: <command-allow-no-pass v='127.0.0.1'/>
10:26:28: <command-deny v='0.0.0.0/0'/>
10:26:28: <command-deny-no-pass v='0.0.0.0/0'/>
10:26:28: <command-port v='36330'/>
10:26:28:
10:26:28: <!-- Slot Control -->
10:26:28: <max-shutdown-wait v='60'/>
10:26:28: <pause-on-battery v='false'/>
10:26:28: <pause-on-start v='false'/>
10:26:28:
10:26:28: <!-- User Information -->
10:26:28: <machine-id v='0'/>
10:26:28: <passkey v='********************************'/>
10:26:28: <team v='208960'/>
10:26:28: <user v='Meh_Lay_Lay'/>
10:26:28:
10:26:28: <!-- Work Unit Control -->
10:26:28: <dump-after-deadline v='true'/>
10:26:28: <max-queue v='16'/>
10:26:28: <max-units v='0'/>
10:26:28: <next-unit-percentage v='99'/>
10:26:28:
10:26:28: <!-- Folding Slots -->
10:26:28: <slot id='1' type='SMP'/>
10:26:28:</config>
10:26:28:Trying to access database...
10:26:28:Successfully acquired database lock
10:26:28:Enabled folding slot 01: READY smp:4
10:26:28:Started thread 1 on PID 5020
10:26:28:Started thread 5 on PID 5020
10:26:28:Started thread 4 on PID 5020
10:26:28:Started thread 3 on PID 5020
10:26:28:Started thread 6 on PID 5020
10:26:28:Sending unit results: id:00 state:SEND error:OK project:7200 run:15 clone:31 gen:23 core:0xa4 unit:0x0000001d07ba4bae4da71fc1f19b3814
10:26:28:Unit 00: Uploading 2.22MiB to 129.64.95.82
10:26:28:Sending unit results: id:02 state:SEND error:OK project:7200 run:72 clone:25 gen:52 core:0xa4 unit:0x0000003a07ba4bae4da726841b9a5948
10:26:28:Connecting to 129.64.95.82:8080
10:26:28:Unit 02: Uploading 2.22MiB to 129.64.95.82
10:26:28:Sending unit results: id:03 state:SEND error:OK project:7200 run:37 clone:7 gen:71 core:0xa4 unit:0x0000004c07ba4bae4da7224e826fb391
10:26:28:Connecting to 129.64.95.82:8080
10:26:29:Unit 03: Uploading 2.20MiB to 129.64.95.82
10:26:29:Sending unit results: id:01 state:SEND error:OK project:7200 run:65 clone:37 gen:27 core:0xa4 unit:0x0000001c07ba4bae4da725b53aceab17
10:26:29:Connecting to 129.64.95.82:8080
10:26:29:Unit 01: Uploading 2.19MiB to 129.64.95.82
10:26:29:Starting Unit 05
10:26:29:Connecting to 129.64.95.82:8080
10:26:29:Running core: C:/Users/Gary/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 05 -suffix 01 -lifeline 5020 -version 701 -checkpoint 3 -np 4
10:26:29:Started core on PID 5224
10:26:29:FahCore 0xa4 started
10:26:29:Started thread 7 on PID 5020
10:26:29:Sending unit results: id:04 state:SEND error:OK project:7200 run:25 clone:6 gen:55 core:0xa4 unit:0x0000003d07ba4bae4da720e664245a63
10:26:29:Unit 04: Uploading 2.21MiB to 129.64.95.82
10:26:29:Connecting to 129.64.95.82:8080
10:26:29:Unit 05:
10:26:29:Unit 05:*------------------------------*
10:26:29:Unit 05:Folding@Home Gromacs GB Core
10:26:29:Unit 05:Version 2.27 (Dec. 15, 2010)
10:26:29:Unit 05:
10:26:29:Unit 05:Preparing to commence simulation
10:26:29:Unit 05:- Ensuring status. Please wait.
10:26:30:Started thread 8 on PID 5020
10:26:30:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1
10:26:38:Unit 05:- Looking at optimizations...
10:26:38:Unit 05:- Working with standard loops on this execution.
10:26:38:Unit 05:- Previous termination of core was improper.
10:26:38:Unit 05:- Going to use standard loops.
10:26:38:Unit 05:- Files status OK
10:26:39:Unit 05:- Expanded 2079398 -> 5386224 (decompressed 259.0 percent)
10:26:39:Unit 05:Called DecompressByteArray: compressed_data_size=2079398 data_size=5386224, decompressed_data_size=5386224 diff=0
10:26:39:Unit 05:- Digital signature verified
10:26:39:Unit 05:
10:26:39:Unit 05:Project: 7809 (Run 10, Clone 22, Gen 12)
10:26:39:Unit 05:
10:26:39:Unit 05:Entering M.D.
10:26:45:Unit 05:Using Gromacs checkpoints
10:26:45:Unit 05:Mapping NT from 4 to 4
10:26:46:Unit 05:Resuming from checkpoint
10:26:46:Unit 05:Verified 05/wudata_01.log
10:26:46:Unit 05:Verified 05/wudata_01.trr
10:26:46:Unit 05:Verified 05/wudata_01.xtc
10:26:46:Unit 05:Verified 05/wudata_01.edr
10:26:46:Unit 05:Completed 817320 out of 1500000 steps (54%)
10:26:49:WARNING: WorkServer connection failed on port 8080 trying 80
10:26:49:Connecting to 129.64.95.82:80
10:26:49:WARNING: WorkServer connection failed on port 8080 trying 80
10:26:49:Connecting to 129.64.95.82:80
10:26:50:WARNING: WorkServer connection failed on port 8080 trying 80
10:26:50:Connecting to 129.64.95.82:80
10:26:50:WARNING: WorkServer connection failed on port 8080 trying 80
10:26:50:Connecting to 129.64.95.82:80
10:26:50:WARNING: WorkServer connection failed on port 8080 trying 80
10:26:50:Connecting to 129.64.95.82:80
10:27:10:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:27:10:Trying to send results to collection server
10:27:11:Unit 00: Uploading 2.22MiB to 171.67.108.26
10:27:11:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:27:11:Connecting to 171.67.108.26:8080
10:27:11:Trying to send results to collection server
10:27:11:Unit 02: Uploading 2.22MiB to 171.67.108.26
10:27:11:Connecting to 171.67.108.26:8080
10:27:11:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:27:11:Trying to send results to collection server
10:27:11:Unit 03: Uploading 2.20MiB to 171.67.108.26
10:27:11:Connecting to 171.67.108.26:8080
10:27:11:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:27:11:Trying to send results to collection server
10:27:11:Unit 01: Uploading 2.19MiB to 171.67.108.26
10:27:11:Connecting to 171.67.108.26:8080
10:27:11:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:27:11:Trying to send results to collection server
10:27:11:Unit 04: Uploading 2.21MiB to 171.67.108.26
10:27:11:Connecting to 171.67.108.26:8080
10:27:32:WARNING: WorkServer connection failed on port 8080 trying 80
10:27:32:WARNING: WorkServer connection failed on port 8080 trying 80
10:27:32:Connecting to 171.67.108.26:80
10:27:32:Connecting to 171.67.108.26:80
10:27:32:WARNING: WorkServer connection failed on port 8080 trying 80
10:27:32:Connecting to 171.67.108.26:80
10:27:32:WARNING: WorkServer connection failed on port 8080 trying 80
10:27:32:Connecting to 171.67.108.26:80
10:27:32:WARNING: WorkServer connection failed on port 8080 trying 80
10:27:32:Connecting to 171.67.108.26:80
10:27:53:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:27:53:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:27:53:Sending unit results: id:02 state:SEND error:OK project:7200 run:72 clone:25 gen:52 core:0xa4 unit:0x0000003a07ba4bae4da726841b9a5948
10:27:53:Unit 02: Uploading 2.22MiB to 129.64.95.82
10:27:53:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:27:53:Connecting to 129.64.95.82:8080
10:27:53:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:27:53:Sending unit results: id:00 state:SEND error:OK project:7200 run:15 clone:31 gen:23 core:0xa4 unit:0x0000001d07ba4bae4da71fc1f19b3814
10:27:53:Unit 00: Uploading 2.22MiB to 129.64.95.82
10:27:53:Connecting to 129.64.95.82:8080
10:27:53:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:27:53:Sending unit results: id:03 state:SEND error:OK project:7200 run:37 clone:7 gen:71 core:0xa4 unit:0x0000004c07ba4bae4da7224e826fb391
10:27:53:Unit 03: Uploading 2.20MiB to 129.64.95.82
10:27:53:Connecting to 129.64.95.82:8080
10:27:53:Sending unit results: id:01 state:SEND error:OK project:7200 run:65 clone:37 gen:27 core:0xa4 unit:0x0000001c07ba4bae4da725b53aceab17
10:27:53:Unit 01: Uploading 2.19MiB to 129.64.95.82
10:27:53:Connecting to 129.64.95.82:8080
10:27:54:Sending unit results: id:04 state:SEND error:OK project:7200 run:25 clone:6 gen:55 core:0xa4 unit:0x0000003d07ba4bae4da720e664245a63
10:27:54:Unit 04: Uploading 2.21MiB to 129.64.95.82
10:27:54:Connecting to 129.64.95.82:8080
10:28:14:WARNING: WorkServer connection failed on port 8080 trying 80
10:28:14:Connecting to 129.64.95.82:80
10:28:14:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A socket operation was attempted to an unreachable host.
10:28:14:Trying to send results to collection server
10:28:14:Unit 02: Uploading 2.22MiB to 171.67.108.26
10:28:14:Connecting to 171.67.108.26:8080
10:28:14:WARNING: WorkServer connection failed on port 8080 trying 80
10:28:14:Connecting to 171.67.108.26:80
10:28:14:ERROR: Exception: Failed to connect to 171.67.108.26:80: A socket operation was attempted to an unreachable host.
10:28:14:WARNING: WorkServer connection failed on port 8080 trying 80
10:28:14:Connecting to 129.64.95.82:80
10:28:14:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A socket operation was attempted to an unreachable host.
10:28:14:Trying to send results to collection server
10:28:14:Unit 00: Uploading 2.22MiB to 171.67.108.26
10:28:14:Connecting to 171.67.108.26:8080
10:28:14:WARNING: WorkServer connection failed on port 8080 trying 80
10:28:14:Connecting to 171.67.108.26:80
10:28:14:ERROR: Exception: Failed to connect to 171.67.108.26:80: A socket operation was attempted to an unreachable host.
10:28:14:WARNING: WorkServer connection failed on port 8080 trying 80
10:28:14:Connecting to 129.64.95.82:80
10:28:14:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A socket operation was attempted to an unreachable host.
10:28:14:Trying to send results to collection server
10:28:14:Unit 03: Uploading 2.20MiB to 171.67.108.26
10:28:14:Connecting to 171.67.108.26:8080
10:28:14:WARNING: WorkServer connection failed on port 8080 trying 80
10:28:14:Connecting to 171.67.108.26:80
10:28:14:ERROR: Exception: Failed to connect to 171.67.108.26:80: A socket operation was attempted to an unreachable host.
10:28:15:WARNING: WorkServer connection failed on port 8080 trying 80
10:28:15:Connecting to 129.64.95.82:80
10:28:15:WARNING: WorkServer connection failed on port 8080 trying 80
10:28:15:Connecting to 129.64.95.82:80
10:28:36:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:28:36:Trying to send results to collection server
10:28:36:Unit 01: Uploading 2.19MiB to 171.67.108.26
10:28:36:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:28:36:Connecting to 171.67.108.26:8080
10:28:36:Trying to send results to collection server
10:28:36:Unit 04: Uploading 2.21MiB to 171.67.108.26
10:28:36:Connecting to 171.67.108.26:8080
10:28:37:WARNING: WorkServer connection failed on port 8080 trying 80
10:28:37:Connecting to 171.67.108.26:80
10:28:39:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:28:40:WARNING: WorkServer connection failed on port 8080 trying 80
10:28:40:Connecting to 171.67.108.26:80
10:28:44:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:28:53:Sending unit results: id:02 state:SEND error:OK project:7200 run:72 clone:25 gen:52 core:0xa4 unit:0x0000003a07ba4bae4da726841b9a5948
10:28:53:Unit 02: Uploading 2.22MiB to 129.64.95.82
10:28:53:Connecting to 129.64.95.82:8080
10:28:53:Sending unit results: id:00 state:SEND error:OK project:7200 run:15 clone:31 gen:23 core:0xa4 unit:0x0000001d07ba4bae4da71fc1f19b3814
10:28:53:Unit 00: Uploading 2.22MiB to 129.64.95.82
10:28:53:Connecting to 129.64.95.82:8080
10:28:53:Sending unit results: id:03 state:SEND error:OK project:7200 run:37 clone:7 gen:71 core:0xa4 unit:0x0000004c07ba4bae4da7224e826fb391
10:28:53:Unit 03: Uploading 2.20MiB to 129.64.95.82
10:28:53:Connecting to 129.64.95.82:8080
10:28:53:Sending unit results: id:01 state:SEND error:OK project:7200 run:65 clone:37 gen:27 core:0xa4 unit:0x0000001c07ba4bae4da725b53aceab17
10:28:54:Unit 01: Uploading 2.19MiB to 129.64.95.82
10:28:54:Connecting to 129.64.95.82:8080
10:28:54:Sending unit results: id:04 state:SEND error:OK project:7200 run:25 clone:6 gen:55 core:0xa4 unit:0x0000003d07ba4bae4da720e664245a63
10:28:54:Unit 04: Uploading 2.21MiB to 129.64.95.82
10:28:54:Connecting to 129.64.95.82:8080
10:29:04:Unit 01: 0.54%
10:29:10:Unit 03: 0.53%
10:29:11:Unit 01: 0.89%
10:29:15:WARNING: WorkServer connection failed on port 8080 trying 80
10:29:15:Connecting to 129.64.95.82:80
10:29:17:Unit 03: 0.89%
10:29:18:Unit 01: 2.32%
10:29:26:Unit 03: 1.78%
10:29:28:Unit 01: 2.68%
10:29:36:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:29:36:Trying to send results to collection server
10:29:36:Unit 04: Uploading 2.21MiB to 171.67.108.26
10:29:36:Connecting to 171.67.108.26:8080
10:29:49:WARNING: WorkServer connection failed on port 8080 trying 80
10:29:49:Connecting to 171.67.108.26:80
10:29:51:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:30:02:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:30:02:SocketDevice::write(): Socket not open
10:30:02:WARNING: Exception: Failed to send results to work server: Upload failed
10:30:02:Trying to send results to collection server
10:30:02:Unit 01: Uploading 2.19MiB to 171.67.108.26
10:30:02:Connecting to 171.67.108.26:8080
10:30:03:WARNING: WorkServer connection failed on port 8080 trying 80
10:30:03:Connecting to 171.67.108.26:80
10:30:05:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:30:07:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:30:07:SocketDevice::write(): Socket not open
10:30:07:WARNING: Exception: Failed to send results to work server: Upload failed
10:30:07:Trying to send results to collection server
10:30:07:Unit 00: Uploading 2.22MiB to 171.67.108.26
10:30:07:Connecting to 171.67.108.26:8080
10:30:09:WARNING: WorkServer connection failed on port 8080 trying 80
10:30:09:Connecting to 171.67.108.26:80
10:30:10:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:30:30:Sending unit results: id:00 state:SEND error:OK project:7200 run:15 clone:31 gen:23 core:0xa4 unit:0x0000001d07ba4bae4da71fc1f19b3814
10:30:30:Unit 00: Uploading 2.22MiB to 129.64.95.82
10:30:30:Connecting to 129.64.95.82:8080
10:30:31:Sending unit results: id:01 state:SEND error:OK project:7200 run:65 clone:37 gen:27 core:0xa4 unit:0x0000001c07ba4bae4da725b53aceab17
10:30:31:Unit 01: Uploading 2.19MiB to 129.64.95.82
10:30:31:Connecting to 129.64.95.82:8080
10:30:31:Sending unit results: id:04 state:SEND error:OK project:7200 run:25 clone:6 gen:55 core:0xa4 unit:0x0000003d07ba4bae4da720e664245a63
10:30:31:Unit 04: Uploading 2.21MiB to 129.64.95.82
10:30:31:Connecting to 129.64.95.82:8080
10:30:47:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:30:47:SocketDevice::write(): Socket not open
10:30:47:WARNING: Exception: Failed to send results to work server: Upload failed
10:30:47:Trying to send results to collection server
10:30:47:Unit 03: Uploading 2.20MiB to 171.67.108.26
10:30:47:Connecting to 171.67.108.26:8080
10:30:47:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:30:47:SocketDevice::write(): Socket not open
10:30:47:WARNING: Exception: Failed to send results to work server: Upload failed
10:30:47:Trying to send results to collection server
10:30:47:Unit 02: Uploading 2.22MiB to 171.67.108.26
10:30:47:Connecting to 171.67.108.26:8080
10:30:48:WARNING: WorkServer connection failed on port 8080 trying 80
10:30:48:Connecting to 171.67.108.26:80
10:30:49:WARNING: WorkServer connection failed on port 8080 trying 80
10:30:49:Connecting to 171.67.108.26:80
10:30:50:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:30:50:Sending unit results: id:03 state:SEND error:OK project:7200 run:37 clone:7 gen:71 core:0xa4 unit:0x0000004c07ba4bae4da7224e826fb391
10:30:50:Unit 03: Uploading 2.20MiB to 129.64.95.82
10:30:50:Connecting to 129.64.95.82:8080
10:30:56:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:30:56:Sending unit results: id:02 state:SEND error:OK project:7200 run:72 clone:25 gen:52 core:0xa4 unit:0x0000003a07ba4bae4da726841b9a5948
10:30:56:Unit 02: Uploading 2.22MiB to 129.64.95.82
10:30:56:Connecting to 129.64.95.82:8080
10:31:12:Unit 03: 0.53%
10:31:24:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:31:24:SocketDevice::write(): Socket not open
10:31:24:WARNING: Exception: Failed to send results to work server: Upload failed
10:31:24:Trying to send results to collection server
10:31:24:Unit 01: Uploading 2.19MiB to 171.67.108.26
10:31:24:Connecting to 171.67.108.26:8080
10:31:26:WARNING: WorkServer connection failed on port 8080 trying 80
10:31:26:Connecting to 171.67.108.26:80
10:31:28:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:31:39:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:31:39:SocketDevice::write(): Socket not open
10:31:39:WARNING: Exception: Failed to send results to work server: Upload failed
10:31:39:Trying to send results to collection server
10:31:39:Unit 00: Uploading 2.22MiB to 171.67.108.26
10:31:39:Connecting to 171.67.108.26:8080
10:31:40:WARNING: WorkServer connection failed on port 8080 trying 80
10:31:40:Connecting to 171.67.108.26:80
10:31:42:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:31:50:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:31:50:SocketDevice::write(): Socket not open
10:31:50:WARNING: Exception: Failed to send results to work server: Upload failed
10:31:50:Trying to send results to collection server
10:31:50:Unit 02: Uploading 2.22MiB to 171.67.108.26
10:31:50:Connecting to 171.67.108.26:8080
10:31:51:WARNING: WorkServer connection failed on port 8080 trying 80
10:31:51:Connecting to 171.67.108.26:80
10:31:53:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:32:04:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:32:04:SocketDevice::write(): Socket not open
10:32:04:WARNING: Exception: Failed to send results to work server: Upload failed
10:32:04:Trying to send results to collection server
10:32:04:Unit 03: Uploading 2.20MiB to 171.67.108.26
10:32:04:Connecting to 171.67.108.26:8080
10:32:17:WARNING: WorkServer connection failed on port 8080 trying 80
10:32:17:Connecting to 171.67.108.26:80
10:32:31:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:32:32:Unit 05:Completed 825000 out of 1500000 steps (55%)
10:33:07:Sending unit results: id:00 state:SEND error:OK project:7200 run:15 clone:31 gen:23 core:0xa4 unit:0x0000001d07ba4bae4da71fc1f19b3814
10:33:07:Unit 00: Uploading 2.22MiB to 129.64.95.82
10:33:07:Connecting to 129.64.95.82:8080
10:33:08:Sending unit results: id:01 state:SEND error:OK project:7200 run:65 clone:37 gen:27 core:0xa4 unit:0x0000001c07ba4bae4da725b53aceab17
10:33:08:Unit 01: Uploading 2.19MiB to 129.64.95.82
10:33:08:Connecting to 129.64.95.82:8080
10:33:14:Unit 01: 1.07%
10:33:16:Unit 00: 0.53%
10:33:27:Sending unit results: id:03 state:SEND error:OK project:7200 run:37 clone:7 gen:71 core:0xa4 unit:0x0000004c07ba4bae4da7224e826fb391
10:33:27:Unit 03: Uploading 2.20MiB to 129.64.95.82
10:33:27:Connecting to 129.64.95.82:8080
10:33:31:Unit 00: 0.70%
10:33:33:Sending unit results: id:02 state:SEND error:OK project:7200 run:72 clone:25 gen:52 core:0xa4 unit:0x0000003a07ba4bae4da726841b9a5948
10:33:33:Unit 02: Uploading 2.22MiB to 129.64.95.82
10:33:33:Connecting to 129.64.95.82:8080
10:33:47:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:33:47:SocketDevice::write(): Socket not open
10:33:47:WARNING: Exception: Failed to send results to work server: Upload failed
10:33:47:Trying to send results to collection server
10:33:47:Unit 01: Uploading 2.19MiB to 171.67.108.26
10:33:47:Connecting to 171.67.108.26:8080
10:33:49:WARNING: WorkServer connection failed on port 8080 trying 80
10:33:49:Connecting to 171.67.108.26:80
10:33:51:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:33:54:Unit 03: 0.53%
10:33:57:Unit 00: 0.88%
10:35:01:Unit 00: 1.94%
10:35:31:Unit 00: 2.11%
10:35:31:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:35:31:SocketDevice::write(): Socket not open
10:35:31:WARNING: Exception: Failed to send results to work server: Upload failed
10:35:31:Trying to send results to collection server
10:35:31:Unit 02: Uploading 2.22MiB to 171.67.108.26
10:35:31:Connecting to 171.67.108.26:8080
10:35:33:WARNING: WorkServer connection failed on port 8080 trying 80
10:35:33:Connecting to 171.67.108.26:80
10:35:35:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:35:55:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:35:55:SocketDevice::write(): Socket not open
10:35:55:WARNING: Exception: Failed to send results to work server: Upload failed
10:35:55:Trying to send results to collection server
10:35:56:Unit 00: Uploading 2.22MiB to 171.67.108.26
10:35:56:Connecting to 171.67.108.26:8080
10:35:57:WARNING: WorkServer connection failed on port 8080 trying 80
10:35:57:Connecting to 171.67.108.26:80
10:35:59:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
***********************************************************SKIPPED A LOT*****************************************************************************
09:10:13:FahCore, running Unit 06, returned: FINISHED_UNIT (100 = 0x64)
09:10:14:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
09:10:14:Unit 06: Uploading 8.31MiB to 171.64.65.55
09:10:14:Connecting to 171.64.65.55:8080
09:10:26:Unit 06: 0.38%
09:11:31:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
09:11:31:SocketDevice::write(): Socket not open
09:11:31:WARNING: Exception: Failed to send results to work server: Upload failed
09:11:31:Trying to send results to collection server
09:11:31:Unit 06: Uploading 8.31MiB to 171.67.108.26
09:11:31:Connecting to 171.67.108.26:8080
09:11:33:WARNING: WorkServer connection failed on port 8080 trying 80
09:11:33:Connecting to 171.67.108.26:80
09:11:46:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
09:11:46:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
09:11:47:Unit 06: Uploading 8.31MiB to 171.64.65.55
09:11:47:Connecting to 171.64.65.55:8080
09:12:11:Unit 06: 0.33%
09:12:47:Unit 06: 0.38%
09:14:31:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
09:14:31:SocketDevice::write(): Socket not open
09:14:31:WARNING: Exception: Failed to send results to work server: Upload failed
09:14:31:Trying to send results to collection server
09:14:31:Unit 06: Uploading 8.31MiB to 171.67.108.26
09:14:31:Connecting to 171.67.108.26:8080
09:14:46:WARNING: WorkServer connection failed on port 8080 trying 80
09:14:46:Connecting to 171.67.108.26:80
09:14:49:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
09:14:49:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
09:14:49:Unit 06: Uploading 8.31MiB to 171.64.65.55
09:14:49:Connecting to 171.64.65.55:8080
09:15:07:Unit 06: 0.19%
09:20:35:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
09:20:35:SocketDevice::write(): Socket not open
09:20:35:WARNING: Exception: Failed to send results to work server: Upload failed
09:20:35:Trying to send results to collection server
09:20:35:Unit 06: Uploading 8.31MiB to 171.67.108.26
09:20:35:Connecting to 171.67.108.26:8080
09:20:38:WARNING: WorkServer connection failed on port 8080 trying 80
09:20:38:Connecting to 171.67.108.26:80
09:20:40:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
09:20:40:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
09:20:40:Unit 06: Uploading 8.31MiB to 171.64.65.55
09:20:40:Connecting to 171.64.65.55:8080
09:20:46:Unit 06: 0.42%
09:20:52:Unit 06: 0.85%
09:20:58:Unit 06: 1.22%
09:21:04:Unit 06: 1.60%
09:21:10:Unit 06: 2.26%
09:21:19:Unit 06: 3.10%
09:24:05:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
09:24:05:SocketDevice::write(): Socket not open
09:24:05:WARNING: Exception: Failed to send results to work server: Upload failed
09:24:06:Trying to send results to collection server
09:24:06:Unit 06: Uploading 8.31MiB to 171.67.108.26
09:24:06:Connecting to 171.67.108.26:8080
09:24:10:WARNING: WorkServer connection failed on port 8080 trying 80
09:24:10:Connecting to 171.67.108.26:80
09:24:24:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
09:24:24:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
09:24:24:Unit 06: Uploading 8.31MiB to 171.64.65.55
09:24:24:Connecting to 171.64.65.55:8080
09:24:31:Unit 06: 0.56%
09:24:37:Unit 06: 1.22%
09:24:43:Unit 06: 1.74%
09:24:49:Unit 06: 2.40%
09:25:58:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
09:25:58:SocketDevice::write(): Socket not open
09:25:58:WARNING: Exception: Failed to send results to work server: Upload failed
09:25:58:Trying to send results to collection server
09:25:58:Unit 06: Uploading 8.31MiB to 171.67.108.26
09:25:58:Connecting to 171.67.108.26:8080
09:26:00:WARNING: WorkServer connection failed on port 8080 trying 80
09:26:00:Connecting to 171.67.108.26:80
09:26:01:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
09:28:38:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
09:28:38:Unit 06: Uploading 8.31MiB to 171.64.65.55
09:28:38:Connecting to 171.64.65.55:8080
09:32:39:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
09:32:39:SocketDevice::write(): Socket not open
09:32:39:WARNING: Exception: Failed to send results to work server: Upload failed
09:32:39:Trying to send results to collection server
09:32:39:Unit 06: Uploading 8.31MiB to 171.67.108.26
09:32:39:Connecting to 171.67.108.26:8080
09:32:41:WARNING: WorkServer connection failed on port 8080 trying 80
09:32:41:Connecting to 171.67.108.26:80
09:32:47:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
09:35:30:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
09:35:30:Unit 06: Uploading 8.31MiB to 171.64.65.55
09:35:30:Connecting to 171.64.65.55:8080
09:36:46:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
09:36:46:SocketDevice::write(): Socket not open
09:36:46:WARNING: Exception: Failed to send results to work server: Upload failed
09:36:46:Trying to send results to collection server
09:36:47:Unit 06: Uploading 8.31MiB to 171.67.108.26
09:36:47:Connecting to 171.67.108.26:8080
09:36:48:WARNING: WorkServer connection failed on port 8080 trying 80
09:36:48:Connecting to 171.67.108.26:80
09:36:50:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
09:46:35:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
09:46:35:Unit 06: Uploading 8.31MiB to 171.64.65.55
09:46:35:Connecting to 171.64.65.55:8080
09:46:44:Unit 06: 0.71%
09:46:55:Unit 06: 1.22%
09:48:00:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
09:48:00:SocketDevice::write(): Socket not open
09:48:00:WARNING: Exception: Failed to send results to work server: Upload failed
09:48:00:Trying to send results to collection server
09:48:01:Unit 06: Uploading 8.31MiB to 171.67.108.26
09:48:01:Connecting to 171.67.108.26:8080
09:48:22:WARNING: WorkServer connection failed on port 8080 trying 80
09:48:22:Connecting to 171.67.108.26:80
09:48:23:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:04:32:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
10:04:32:Unit 06: Uploading 8.31MiB to 171.64.65.55
10:04:32:Connecting to 171.64.65.55:8080
10:04:38:Unit 06: 1.41%
10:04:44:Unit 06: 2.77%
10:04:50:Unit 06: 3.72%
10:04:56:Unit 06: 5.41%
10:05:02:Unit 06: 6.73%
10:05:11:Unit 06: 7.24%
10:06:18:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:06:18:SocketDevice::write(): Socket not open
10:06:18:WARNING: Exception: Failed to send results to work server: Upload failed
10:06:18:Trying to send results to collection server
10:06:18:Unit 06: Uploading 8.31MiB to 171.67.108.26
10:06:18:Connecting to 171.67.108.26:8080
10:06:19:WARNING: WorkServer connection failed on port 8080 trying 80
10:06:19:Connecting to 171.67.108.26:80
10:06:33:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
10:33:34:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
10:33:35:Unit 06: Uploading 8.31MiB to 171.64.65.55
10:33:36:Connecting to 171.64.65.55:8080
10:33:41:Unit 06: 0.80%
10:34:38:Unit 06: 1.36%
10:37:39:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:37:39:SocketDevice::write(): Socket not open
10:37:39:WARNING: Exception: Failed to send results to work server: Upload failed
10:37:39:Trying to send results to collection server
10:37:39:Unit 06: Uploading 8.31MiB to 171.67.108.26
10:37:39:Connecting to 171.67.108.26:8080
10:37:51:Connecting to assign3.stanford.edu:8080
10:37:52:WARNING: WorkServer connection failed on port 8080 trying 80
10:37:52:Connecting to 171.67.108.26:80
10:37:53:News: Welcome to Folding@Home
10:37:53:Assigned to work server 171.64.65.99
10:37:53:Requesting new work unit for slot 01: READY smp:4 from 171.64.65.99
10:37:53:Connecting to 171.64.65.99:8080
10:37:54:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
10:37:54:Slot 01: Downloading 1.96MiB
10:38:00:Slot 01: 2.39%
10:38:07:Slot 01: 4.39%
10:38:14:Slot 01: 4.78%
10:38:20:Slot 01: 9.12%
10:38:26:Slot 01: 11.76%
10:38:32:Slot 01: 15.95%
10:38:41:Slot 01: 17.35%
10:38:58:Slot 01: 17.54%
10:39:05:Slot 01: 21.33%
10:39:11:Slot 01: 24.45%
10:39:17:Slot 01: 26.92%
10:39:23:Slot 01: 27.11%
10:39:30:Slot 01: 27.44%
10:39:44:Slot 01: 27.51%
10:39:51:Slot 01: 28.29%
10:39:58:Slot 01: 30.10%
10:40:06:Slot 01: 30.30%
10:40:12:Slot 01: 30.85%
10:40:18:Slot 01: 33.69%
10:40:24:Slot 01: 36.60%
10:40:31:Slot 01: 39.48%
10:40:46:Slot 01: 40.47%
10:41:01:Slot 01: 40.87%
10:41:16:Slot 01: 41.27%
10:42:08:Slot 01: 41.79%
10:42:09:SocketDevice::read(): End of stream
10:42:09:ERROR: Exception: Download failed
10:42:09:Connecting to assign3.stanford.edu:8080
10:42:09:News: Welcome to Folding@Home
10:42:09:Assigned to work server 171.64.65.99
10:42:09:Requesting new work unit for slot 01: READY smp:4 from 171.64.65.99
10:42:09:Connecting to 171.64.65.99:8080
10:42:11:Slot 01: Downloading 1.96MiB
10:42:18:Slot 01: 3.19%
10:42:24:Slot 01: 6.38%
10:42:30:Slot 01: 10.57%
10:42:49:Slot 01: 11.56%
10:43:08:Slot 01: 11.73%
10:43:45:Slot 01: 11.87%
10:43:47:SocketDevice::read(): End of stream
10:43:47:ERROR: Exception: Download failed
10:43:47:Connecting to assign3.stanford.edu:8080
10:43:50:News: Welcome to Folding@Home
10:43:50:Assigned to work server 171.64.65.99
10:43:50:Requesting new work unit for slot 01: READY smp:4 from 171.64.65.99
10:43:50:Connecting to 171.64.65.99:8080
10:43:52:Slot 01: Downloading 1.98MiB
10:44:00:Slot 01: 1.58%
10:44:06:Slot 01: 1.77%
10:45:06:ERROR: Exception: Download failed
10:45:24:Connecting to assign3.stanford.edu:8080
10:45:25:News: Welcome to Folding@Home
10:45:25:Assigned to work server 171.64.65.99
10:45:27:Requesting new work unit for slot 01: READY smp:4 from 171.64.65.99
10:45:27:Connecting to 171.64.65.99:8080
10:45:32:Slot 01: Downloading 1.96MiB
10:45:38:Slot 01: 5.14%
10:45:44:Slot 01: 6.91%
10:46:11:Slot 01: 6.98%
10:46:17:Slot 01: 10.76%
10:46:23:Slot 01: 14.35%
10:46:29:Slot 01: 17.74%
10:46:35:Slot 01: 19.73%
10:46:44:Slot 01: 20.13%
10:46:50:Slot 01: 23.11%
10:46:57:Slot 01: 24.92%
10:47:04:Slot 01: 26.31%
10:47:10:Slot 01: 27.51%
10:47:16:Slot 01: 30.22%
10:47:22:Slot 01: 33.63%
10:47:28:Slot 01: 36.28%
10:47:34:Slot 01: 37.67%
10:47:41:Slot 01: 38.25%
10:47:48:Slot 01: 40.80%
10:48:02:Slot 01: 41.66%
10:48:10:Slot 01: 44.25%
10:48:16:Slot 01: 45.45%
10:48:22:Slot 01: 46.63%
10:48:28:Slot 01: 49.63%
10:48:34:Slot 01: 53.31%
10:48:50:Slot 01: 55.30%
10:48:57:Slot 01: 57.41%
10:49:05:Slot 01: 57.79%
10:49:11:Slot 01: 59.60%
10:49:18:Slot 01: 63.79%
10:49:26:Slot 01: 65.78%
10:49:42:Slot 01: 67.18%
10:49:48:Slot 01: 70.96%
10:49:55:Slot 01: 73.35%
10:50:03:Slot 01: 74.55%
10:50:09:Slot 01: 74.75%
10:50:17:Slot 01: 76.12%
10:50:23:Slot 01: 76.15%
10:50:29:Slot 01: 78.14%
10:50:37:Slot 01: 80.93%
10:50:43:Slot 01: 83.72%
10:50:49:Slot 01: 86.71%
10:50:55:Slot 01: 87.51%
10:51:04:Slot 01: 87.91%
10:51:39:Slot 01: 88.05%
10:51:53:Slot 01: 88.27%
10:51:54:SocketDevice::read(): End of stream
10:51:54:ERROR: Exception: Download failed
10:51:54:Connecting to assign3.stanford.edu:8080
10:51:55:News: Welcome to Folding@Home
10:51:55:Assigned to work server 128.113.12.163
10:51:55:Requesting new work unit for slot 01: READY smp:4 from 128.113.12.163
10:51:55:Connecting to 128.113.12.163:8080
10:51:56:Slot 01: Downloading 1.82MiB
10:52:02:Slot 01: 22.52%
10:52:08:Slot 01: 51.11%
10:52:14:Slot 01: 85.08%
10:52:15:Slot 01: Download complete
10:52:15:Received Unit: id:05 state:DOWNLOAD error:OK project:7905 run:57 clone:13 gen:1 core:0xa4 unit:0x0000000200ac9c234ebaabcc10a3ac58
10:52:16:Starting Unit 05
10:52:16:Running core: C:/Users/Gary/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 05 -suffix 01 -lifeline 5020 -version 701 -checkpoint 3 -np 4
10:52:16:Started core on PID 2516
10:52:16:FahCore 0xa4 started
10:52:16:Started thread 26 on PID 5020
10:52:16:Unit 05:
10:52:16:Unit 05:*------------------------------*
10:52:16:Unit 05:Folding@Home Gromacs GB Core
10:52:16:Unit 05:Version 2.27 (Dec. 15, 2010)
10:52:16:Unit 05:
10:52:16:Unit 05:Preparing to commence simulation
10:52:16:Unit 05:- Looking at optimizations...
10:52:16:Unit 05:- Created dyn
10:52:16:Unit 05:- Files status OK
10:52:16:Unit 05:- Expanded 1905902 -> 2552108 (decompressed 133.9 percent)
10:52:16:Unit 05:Called DecompressByteArray: compressed_data_size=1905902 data_size=2552108, decompressed_data_size=2552108 diff=0
10:52:16:Unit 05:- Digital signature verified
10:52:16:Unit 05:
10:52:16:Unit 05:Project: 7905 (Run 57, Clone 13, Gen 1)
10:52:16:Unit 05:
10:52:16:Unit 05:Assembly optimizations on if available.
10:52:16:Unit 05:Entering M.D.
10:52:22:Unit 05:Mapping NT from 4 to 4
10:52:22:Unit 05:Completed 0 out of 500000 steps (0%)
10:56:26:Unit 05:Completed 5000 out of 500000 steps (1%)
11:00:29:Unit 05:Completed 10000 out of 500000 steps (2%)
11:04:31:Unit 05:Completed 15000 out of 500000 steps (3%)
11:08:30:Unit 05:Completed 20000 out of 500000 steps (4%)
11:12:31:Unit 05:Completed 25000 out of 500000 steps (5%)
11:16:31:Unit 05:Completed 30000 out of 500000 steps (6%)
11:20:30:Unit 05:Completed 35000 out of 500000 steps (7%)
11:20:33:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
11:20:33:Unit 06: Uploading 8.31MiB to 171.64.65.55
11:20:33:Connecting to 171.64.65.55:8080
11:20:39:Unit 06: 0.56%
11:20:45:Unit 06: 1.60%
11:21:12:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
11:21:12:SocketDevice::write(): Socket not open
11:21:12:WARNING: Exception: Failed to send results to work server: Upload failed
11:21:12:Trying to send results to collection server
11:21:12:Unit 06: Uploading 8.31MiB to 171.67.108.26
11:21:12:Connecting to 171.67.108.26:8080
11:21:26:WARNING: WorkServer connection failed on port 8080 trying 80
11:21:26:Connecting to 171.67.108.26:80
11:21:27:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
11:24:29:Unit 05:Completed 40000 out of 500000 steps (8%)
11:28:28:Unit 05:Completed 45000 out of 500000 steps (9%)
11:32:27:Unit 05:Completed 50000 out of 500000 steps (10%)
11:36:24:Unit 05:Completed 55000 out of 500000 steps (11%)
11:40:22:Unit 05:Completed 60000 out of 500000 steps (12%)
11:44:53:Unit 05:Completed 65000 out of 500000 steps (13%)
11:49:18:Unit 05:Completed 70000 out of 500000 steps (14%)
11:53:22:Unit 05:Completed 75000 out of 500000 steps (15%)
11:57:21:Unit 05:Completed 80000 out of 500000 steps (16%)
12:01:19:Unit 05:Completed 85000 out of 500000 steps (17%)
12:05:18:Unit 05:Completed 90000 out of 500000 steps (18%)
12:09:17:Unit 05:Completed 95000 out of 500000 steps (19%)
12:13:16:Unit 05:Completed 100000 out of 500000 steps (20%)
12:17:16:Unit 05:Completed 105000 out of 500000 steps (21%)
12:21:15:Unit 05:Completed 110000 out of 500000 steps (22%)
12:25:13:Unit 05:Completed 115000 out of 500000 steps (23%)
12:29:12:Unit 05:Completed 120000 out of 500000 steps (24%)
12:33:12:Unit 05:Completed 125000 out of 500000 steps (25%)
12:36:34:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
12:36:34:Unit 06: Uploading 8.31MiB to 171.64.65.55
12:36:34:Connecting to 171.64.65.55:8080
12:36:53:Unit 06: 0.24%
12:37:11:Unit 05:Completed 130000 out of 500000 steps (26%)
12:39:19:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
12:39:19:SocketDevice::write(): Socket not open
12:39:19:WARNING: Exception: Failed to send results to work server: Upload failed
12:39:19:Trying to send results to collection server
12:39:19:Unit 06: Uploading 8.31MiB to 171.67.108.26
12:39:19:Connecting to 171.67.108.26:8080
12:39:23:WARNING: WorkServer connection failed on port 8080 trying 80
12:39:23:Connecting to 171.67.108.26:80
12:39:24:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
12:41:11:Unit 05:Completed 135000 out of 500000 steps (27%)
12:45:09:Unit 05:Completed 140000 out of 500000 steps (28%)
12:49:07:Unit 05:Completed 145000 out of 500000 steps (29%)
12:53:07:Unit 05:Completed 150000 out of 500000 steps (30%)
12:57:08:Unit 05:Completed 155000 out of 500000 steps (31%)
13:01:07:Unit 05:Completed 160000 out of 500000 steps (32%)
13:05:06:Unit 05:Completed 165000 out of 500000 steps (33%)
13:09:09:Unit 05:Completed 170000 out of 500000 steps (34%)
13:13:20:Unit 05:Completed 175000 out of 500000 steps (35%)
13:17:33:Unit 05:Completed 180000 out of 500000 steps (36%)
13:21:50:Unit 05:Completed 185000 out of 500000 steps (37%)
13:26:08:Unit 05:Completed 190000 out of 500000 steps (38%)
13:30:20:Unit 05:Completed 195000 out of 500000 steps (39%)
13:34:31:Unit 05:Completed 200000 out of 500000 steps (40%)
13:38:45:Unit 05:Completed 205000 out of 500000 steps (41%)
13:42:59:Unit 05:Completed 210000 out of 500000 steps (42%)
13:47:11:Unit 05:Completed 215000 out of 500000 steps (43%)
13:51:16:Unit 05:Completed 220000 out of 500000 steps (44%)
13:55:25:Unit 05:Completed 225000 out of 500000 steps (45%)
13:59:27:Unit 05:Completed 230000 out of 500000 steps (46%)
14:03:28:Unit 05:Completed 235000 out of 500000 steps (47%)
14:07:29:Unit 05:Completed 240000 out of 500000 steps (48%)
14:11:29:Unit 05:Completed 245000 out of 500000 steps (49%)
14:15:29:Unit 05:Completed 250000 out of 500000 steps (50%)
14:19:31:Unit 05:Completed 255000 out of 500000 steps (51%)
14:23:33:Unit 05:Completed 260000 out of 500000 steps (52%)
14:27:34:Unit 05:Completed 265000 out of 500000 steps (53%)
14:31:35:Unit 05:Completed 270000 out of 500000 steps (54%)
14:35:35:Unit 05:Completed 275000 out of 500000 steps (55%)
14:39:27:Sending unit results: id:03 state:SEND error:OK project:7200 run:37 clone:7 gen:71 core:0xa4 unit:0x0000004c07ba4bae4da7224e826fb391
14:39:27:Unit 03: Uploading 2.20MiB to 129.64.95.82
14:39:27:Connecting to 129.64.95.82:8080
14:39:34:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
14:39:34:Unit 06: Uploading 8.31MiB to 171.64.65.55
14:39:34:Connecting to 171.64.65.55:8080
14:39:34:Unit 05:Completed 280000 out of 500000 steps (56%)
14:39:42:Sending unit results: id:04 state:SEND error:OK project:7200 run:25 clone:6 gen:55 core:0xa4 unit:0x0000003d07ba4bae4da720e664245a63
14:39:42:Unit 04: Uploading 2.21MiB to 129.64.95.82
14:39:42:Connecting to 129.64.95.82:8080
14:39:48:WARNING: WorkServer connection failed on port 8080 trying 80
14:39:48:Connecting to 129.64.95.82:80
14:39:55:WARNING: WorkServer connection failed on port 8080 trying 80
14:39:55:Connecting to 171.64.65.55:80
14:40:03:WARNING: WorkServer connection failed on port 8080 trying 80
14:40:03:Connecting to 129.64.95.82:80
14:40:09:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
14:40:09:Trying to send results to collection server
14:40:09:Unit 03: Uploading 2.20MiB to 171.67.108.26
14:40:09:Connecting to 171.67.108.26:8080
14:40:16:WARNING: Exception: Failed to send results to work server: Failed to connect to 171.64.65.55:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
14:40:16:Trying to send results to collection server
14:40:16:Unit 06: Uploading 8.31MiB to 171.67.108.26
14:40:16:Connecting to 171.67.108.26:8080
14:40:24:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
14:40:24:Trying to send results to collection server
14:40:24:Unit 04: Uploading 2.21MiB to 171.67.108.26
14:40:24:Connecting to 171.67.108.26:8080
14:40:26:Sending unit results: id:00 state:SEND error:OK project:7200 run:15 clone:31 gen:23 core:0xa4 unit:0x0000001d07ba4bae4da71fc1f19b3814
14:40:26:Unit 00: Uploading 2.22MiB to 129.64.95.82
14:40:26:Connecting to 129.64.95.82:8080
14:40:30:WARNING: WorkServer connection failed on port 8080 trying 80
14:40:30:Connecting to 171.67.108.26:80
14:40:37:WARNING: WorkServer connection failed on port 8080 trying 80
14:40:37:Connecting to 171.67.108.26:80
14:40:45:WARNING: WorkServer connection failed on port 8080 trying 80
14:40:45:Connecting to 171.67.108.26:80
14:40:47:WARNING: WorkServer connection failed on port 8080 trying 80
14:40:47:Connecting to 129.64.95.82:80
14:40:51:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
14:40:58:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
14:41:06:ERROR: Exception: Failed to connect to 171.67.108.26:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
14:41:08:WARNING: Exception: Failed to send results to work server: Failed to connect to 129.64.95.82:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
14:41:08:Trying to send results to collection server
14:41:08:Unit 00: Uploading 2.22MiB to 171.67.108.26
14:41:08:Connecting to 171.67.108.26:8080
14:41:27:WARNING: WorkServer connection failed on port 8080 trying 80
14:41:27:Connecting to 171.67.108.26:80
14:41:34:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
14:44:00:Unit 05:Completed 285000 out of 500000 steps (57%)
14:47:33:Sending unit results: id:02 state:SEND error:OK project:7200 run:72 clone:25 gen:52 core:0xa4 unit:0x0000003a07ba4bae4da726841b9a5948
14:47:33:Unit 02: Uploading 2.22MiB to 129.64.95.82
14:47:33:Connecting to 129.64.95.82:8080
14:48:13:Unit 05:Completed 290000 out of 500000 steps (58%)
14:50:50:Sending unit results: id:01 state:SEND error:OK project:7200 run:65 clone:37 gen:27 core:0xa4 unit:0x0000001c07ba4bae4da725b53aceab17
14:50:50:Unit 01: Uploading 2.19MiB to 129.64.95.82
14:50:50:Connecting to 129.64.95.82:8080
14:51:14:Unit 01: 0.54%
14:52:26:Unit 05:Completed 295000 out of 500000 steps (59%)
14:53:04:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
14:53:04:SocketDevice::write(): Socket not open
14:53:04:WARNING: Exception: Failed to send results to work server: Upload failed
14:53:04:Trying to send results to collection server
14:53:04:Unit 02: Uploading 2.22MiB to 171.67.108.26
14:53:04:Connecting to 171.67.108.26:8080
14:53:06:WARNING: WorkServer connection failed on port 8080 trying 80
14:53:06:Connecting to 171.67.108.26:80
14:53:07:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
14:53:16:Unit 01: 0.71%
14:56:32:Unit 05:Completed 300000 out of 500000 steps (60%)
15:00:49:Unit 05:Completed 305000 out of 500000 steps (61%)
15:04:17:Unit 01: 0.89%
15:05:07:Unit 05:Completed 310000 out of 500000 steps (62%)
15:09:42:Unit 05:Completed 315000 out of 500000 steps (63%)
15:09:48:Unit 01: 1.07%
15:10:48:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
15:10:48:SocketDevice::write(): Socket not open
15:10:48:WARNING: Exception: Failed to send results to work server: Upload failed
15:10:48:Trying to send results to collection server
15:10:48:Unit 01: Uploading 2.19MiB to 171.67.108.26
15:10:48:Connecting to 171.67.108.26:8080
15:10:50:WARNING: WorkServer connection failed on port 8080 trying 80
15:10:50:Connecting to 171.67.108.26:80
15:10:52:ERROR: Exception: Failed to connect to 171.67.108.26:80: No connection could be made because the target machine actively refused it.
15:14:05:Unit 05:Completed 320000 out of 500000 steps (64%)
15:18:18:Unit 05:Completed 325000 out of 500000 steps (65%)
15:22:37:Unit 05:Completed 330000 out of 500000 steps (66%)
15:26:56:Unit 05:Completed 335000 out of 500000 steps (67%)
15:31:11:Unit 05:Completed 340000 out of 500000 steps (68%)
15:35:30:Unit 05:Completed 345000 out of 500000 steps (69%)
15:40:11:Unit 05:Completed 350000 out of 500000 steps (70%)
15:44:41:Unit 05:Completed 355000 out of 500000 steps (71%)
I have 5 old projects stuck at trying to upload, 1 recent one that's stuck at uploading, and 1 currently folding.
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Tue Nov 22, 2011 4:33 pm
by bruce
Meh_Lay_Lay wrote:I have 5 old projects stuck at trying to upload, 1 recent one that's stuck at uploading, and 1 currently folding.
OK. That certainly falls within the scope of this topic because the first five are all 129.64.95.82. The last one is 171.64.65.55 so we may have to deal with that one separately. I need to do a little more research.
Code: Select all
10:26:28:Sending unit results: id:00 state:SEND error:OK project:7200 run:15 clone:31 gen:23 core:0xa4 unit:0x0000001d07ba4bae4da71fc1f19b3814
10:26:28:Unit 00: Uploading 2.22MiB to 129.64.95.82
10:26:28:Sending unit results: id:02 state:SEND error:OK project:7200 run:72 clone:25 gen:52 core:0xa4 unit:0x0000003a07ba4bae4da726841b9a5948
10:26:28:Connecting to 129.64.95.82:8080
10:26:28:Unit 02: Uploading 2.22MiB to 129.64.95.82
10:26:28:Sending unit results: id:03 state:SEND error:OK project:7200 run:37 clone:7 gen:71 core:0xa4 unit:0x0000004c07ba4bae4da7224e826fb391
10:26:28:Connecting to 129.64.95.82:8080
10:26:29:Unit 03: Uploading 2.20MiB to 129.64.95.82
10:26:29:Sending unit results: id:01 state:SEND error:OK project:7200 run:65 clone:37 gen:27 core:0xa4 unit:0x0000001c07ba4bae4da725b53aceab17
10:26:29:Connecting to 129.64.95.82:8080
10:26:29:Unit 01: Uploading 2.19MiB to 129.64.95.82
10:26:29:Sending unit results: id:04 state:SEND error:OK project:7200 run:25 clone:6 gen:55 core:0xa4 unit:0x0000003d07ba4bae4da720e664245a63
10:26:29:Unit 04: Uploading 2.21MiB to 129.64.95.82
10:26:29:Connecting to 129.64.95.82:8080
plus one new one:
Code: Select all
10:33:34:Sending unit results: id:06 state:SEND error:OK project:11021 run:0 clone:3665 gen:13 core:0xa3 unit:0x000000100a3b1e5b4daf3e45d1a81c51
10:33:35:Unit 06: Uploading 8.31MiB to 171.64.65.55
10:33:36:Connecting to 171.64.65.55:8080
10:33:41:Unit 06: 0.80%
10:34:38:Unit 06: 1.36%
10:37:39:SocketDevice::write(): Send error: 10054: An existing connection was forcibly closed by the remote host.
10:37:39:SocketDevice::write(): Socket not open
10:37:39:WARNING: Exception: Failed to send results to work server: Upload failed
10:37:39:Trying to send results to collection server
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Tue Nov 22, 2011 5:09 pm
by jackamo
OK. That certainly falls within the scope of this topic because the first five are all 129.64.95.82. The last one is 171.64.65.55 so we may have to deal with that one separately. I need to do a little more research.
My problem was originally with 129.64.95.82. As I was unable to D/L from this server, the program switched to server 171.64.65.55 and tried to D/L without success. The program now toggles between the 2 servers with the same result...no D/L. Although, upon reviewing my logs, it appears that now the 171.64.65.55 server is trying to be accessed almost exclusively with no luck. I'm not certain if it is a server problem or me. I've disabled my firewall and anti-virus to see if they were causing the issues, but it did not help. I'm stumped and would appreciate any help available. Thank you.
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Tue Nov 22, 2011 6:06 pm
by bruce
OK, jackamo. Having trouble getting work from two servers is a problem we can deal with, but it should have been a new topic. A some point, I'll separate it out into a topic by itself. For the moment, we'll stay here.
Server 129.64.95.82 is listed as a classic server. It was having some troubles distributing new work and it has been reset to "accepting" which means it isn't supposed to be giving out new work. You
SHOULDN'T be assigned to it. Show me a fresh log. (
http://fah-web.stanford.edu/psummary.html does not show any active projects on that server.)
Server 171.64.65.55 is listed as a SMP server. It is actively distributing some WUs periodically. I'm not sure why you're not getting work from it.
Were you trying to get SMP projects or uniprocessor projects? Are you using the "advanced" or -advmethods setting? How many cores are on your CPU? Which OS are you running? (Sorry, you may have answered some of these before, but it's nice to have them all in one place.) The symptoms of switching between two severs and still not getting work can have several causes and there are probably others experiencing the same problem so I'd like to isolate the problem before suggesting a fix.
(Note that Meh_Lay_Lay says he is downloading WUs without problems ... hence the two of you have different problems.)
Re: 129.64.95.82 Haven't been able to upload finished projec
Posted: Tue Nov 22, 2011 10:59 pm
by jackamo
bruce wrote:OK, jackamo. Having trouble getting work from two servers is a problem we can deal with, but it should have been a new topic. A some point, I'll separate it out into a topic by itself. For the moment, we'll stay here.
Were you trying to get SMP projects or uniprocessor projects? Are you using the "advanced" or -advmethods setting? How many cores are on your CPU? Which OS are you running? (Sorry, you may have answered some of these before, but it's nice to have them all in one place.) The symptoms of switching between two severs and still not getting work can have several causes and there are probably others experiencing the same problem so I'd like to isolate the problem before suggesting a fix.
Trying to get SMP projects. Not sure what you mean by -advmethods setting? If you mean by that, do I select the YES option during configuration, then yes, I used it. I have 6 cores on my cpu and running windows 7 ultimate. Here is a copy of part of my log...I only sent 6 attempts, there are many more.
Code: Select all
Launch directory: C:\Users\Neil\FAH
Executable: C:\Users\Neil\FAH\fah6.exe
Arguments: -verbosity 9 -smp
[17:15:35] - Ask before connecting: No
[17:15:35] - User name: jackamo (Team 4)
[17:15:35] - User ID: 3DCF568E6BAB09DA
[17:15:35] - Machine ID: 5
[17:15:35]
[17:15:35] Loaded queue successfully.
[17:15:35] - Preparing to get new work unit...
[17:15:35] - Autosending finished units... [November 22 17:15:35 UTC]
[17:15:35] Cleaning up work directory
[17:15:35] Trying to send all finished work units
[17:15:35] + Attempting to get work packet
[17:15:35] + No unsent completed units remaining.
[17:15:35] Passkey found
[17:15:35] - Autosend completed
[17:15:35] - Will indicate memory of 8183 MB
[17:15:35] - Detect CPU. Vendor: AuthenticAMD, Family: 15, Model: 10, Stepping: 0
[17:15:35] - Connecting to assignment server
[17:15:35] Connecting to http://assign.stanford.edu:8080/
[17:15:36] Posted data.
[17:15:36] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[17:15:36] + News From Folding@Home: Welcome to Folding@Home
[17:15:36] Loaded queue successfully.
[17:15:36] Sent data
[17:15:36] Connecting to http://171.64.65.55:8080/
[17:15:37] Posted data.
[17:15:37] Initial: 8B1F; - Error: Bad packet type from server, expected work assignment
[17:15:37] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[17:15:49] + Attempting to get work packet
[17:15:55] Passkey found
[17:15:55] - Will indicate memory of 8183 MB
[17:15:55] - Connecting to assignment server
[17:15:55] Connecting to http://assign.stanford.edu:8080/
[17:15:56] Posted data.
[17:15:56] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[17:15:56] + News From Folding@Home: Welcome to Folding@Home
[17:15:56] Loaded queue successfully.
[17:15:56] Sent data
[17:15:56] Connecting to http://171.64.65.55:8080/
[17:15:57] Posted data.
[17:15:57] Initial: 8B1F; - Error: Bad packet type from server, expected work assignment
[17:15:57] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[17:16:14] + Attempting to get work packet
[17:16:14] Passkey found
[17:16:14] - Will indicate memory of 8183 MB
[17:16:14] - Connecting to assignment server
[17:16:14] Connecting to http://assign.stanford.edu:8080/
[17:16:15] Posted data.
[17:16:15] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[17:16:15] + News From Folding@Home: Welcome to Folding@Home
[17:16:15] Loaded queue successfully.
[17:16:15] Sent data
[17:16:15] Connecting to http://171.64.65.55:8080/
[17:16:16] Posted data.
[17:16:16] Initial: 8B1F; - Error: Bad packet type from server, expected work assignment
[17:16:16] - Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[17:16:46] + Attempting to get work packet
[17:16:46] Passkey found
[17:16:46] - Will indicate memory of 8183 MB
[17:16:46] - Connecting to assignment server
[17:16:46] Connecting to http://assign.stanford.edu:8080/
[17:16:47] Posted data.
[17:16:47] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[17:16:47] + News From Folding@Home: Welcome to Folding@Home
[17:16:47] Loaded queue successfully.
[17:16:47] Sent data
[17:16:47] Connecting to http://171.64.65.55:8080/
[17:16:48] Posted data.
[17:16:48] Initial: 8B1F; - Error: Bad packet type from server, expected work assignment
[17:16:48] - Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
[17:17:28] + Attempting to get work packet
[17:17:28] Passkey found
[17:17:28] - Will indicate memory of 8183 MB
[17:17:28] - Connecting to assignment server
[17:17:28] Connecting to http://assign.stanford.edu:8080/
[17:17:29] Posted data.
[17:17:29] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[17:17:29] + News From Folding@Home: Welcome to Folding@Home
[17:17:29] Loaded queue successfully.
[17:17:29] Sent data
[17:17:29] Connecting to http://171.64.65.55:8080/
[17:17:30] Posted data.
[17:17:30] Initial: 8B1F; - Error: Bad packet type from server, expected work assignment
[17:17:30] - Attempt #5 to get work failed, and no other work to do.
Waiting before retry.
[17:18:55] + Attempting to get work packet
[17:18:55] Passkey found
[17:18:55] - Will indicate memory of 8183 MB
[17:18:55] - Connecting to assignment server
[17:18:55] Connecting to http://assign.stanford.edu:8080/
[17:18:55] Posted data.
[17:18:55] Initial: 40AB; - Successful: assigned to (171.64.65.55).
[17:18:55] + News From Folding@Home: Welcome to Folding@Home
[17:18:55] Loaded queue successfully.
[17:18:55] Sent data
[17:18:55] Connecting to http://171.64.65.55:8080/
[17:18:56] Posted data.
[17:18:56] Initial: 8B1F; - Error: Bad packet type from server, expected work assignment