Folding Forum

Posted: **Mon Apr 04, 2011 3:34 am**

Bruce, to whom are you directing this question?

If it is me, all my clients are still v6 versions. I don't believe any of them were EUEs, i.e. they all went to 100% as far as I recall.

Posted: **Mon Apr 04, 2011 3:47 am**

DrSpalding, it was directed at both you and Hyperlife (and maybe at John_Weatherman). I wanted to differentiate between a server-based problem (which is what VijayPande was responding to) and a V7 based problem (which I can see from Hyperlife's posted log). Is there one problem or two? At the time I posted (two hours ago) I only had a strong hunch that I was tracking was NOT your problem but I certainly wasn't sure, and I had the same strong hunch that Hyperlife's problem was the same one I was looking at. Your original post did not specify V6 nor did you post a log and John_Weatherman also failed to give enough information for me to decide.

I'm glad you problem is fixed and thanks for the additional information.

Posted: **Mon Apr 04, 2011 6:41 am**

My original post was HERE, and it was two v6 console clients.

Posted: **Sun Apr 17, 2011 2:36 am**

I still have a number of work units unable to return the work units to this server:

Code: Select all

[02:29:38] - Autosending finished units... [April 17 02:29:38 UTC]
[02:29:38] Trying to send all finished work units
[02:29:38] Project: 6516 (Run 5, Clone 212, Gen 36)
[02:29:38] - Read packet limit of 540015616... Set to 524286976.

[02:29:38] + Attempting to send results [April 17 02:29:38 UTC]
[02:29:38] - Reading file work/wuresults_05.dat from core
[02:29:38]   (Read 734920 bytes from disk)
[02:29:38] Connecting to http://171.64.65.62:8080/
[02:30:25] Posted data.
[02:30:25] Initial: 213C; - Uploaded at ~15 kB/s
[02:30:25] - Averaged speed for that direction ~77 kB/s
[02:30:25] - Unknown packet returned from server, expected ACK for results
[02:30:25] - Error: Could not transmit unit 05 (completed April 12) to work server.
[02:30:25] - 35 failed uploads of this unit.
[02:30:25] - Read packet limit of 540015616... Set to 524286976.

Code: Select all

[02:29:25] - Autosending finished units... [April 17 02:29:25 UTC]
[02:29:25] Trying to send all finished work units
[02:29:25] Project: 6504 (Run 1, Clone 199, Gen 95)
[02:29:25] - Read packet limit of 540015616... Set to 524286976.


[02:29:25] + Attempting to send results [April 17 02:29:25 UTC]
[02:29:25]   (Read 613999 bytes from disk)
[02:29:25] Connecting to http://171.64.65.62:8080/

[02:30:14] Posted data.
[02:30:14] Initial: 213C; - Uploaded at ~12 kB/s
[02:30:14] - Averaged speed for that direction ~15 kB/s
[02:30:14] - Unknown packet returned from server, expected ACK for results
[02:30:14] - Error: Could not transmit unit 02 (completed April 11) to work server.
[02:30:14] - 33 failed uploads of this unit.
[02:30:14] - Read packet limit of 540015616... Set to 524286976.

Posted: **Sun Apr 17, 2011 9:39 pm**

We took a look and the server is heavily loaded, but it is working well. We'll keep an eye on it to see what we can do.

Folding Forum

171.64.65.62 (vspg10c) down?

Re: 171.64.65.62 (vspg10c) down?

Re: 171.64.65.62 (vspg10c) down?

Re: 171.64.65.62 (vspg10c) down?

Re: 171.64.65.62 (vspg10c) down?

Re: 171.64.65.62 (vspg10c) down?