Page 2 of 4
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Mon Apr 05, 2010 6:36 am
by k1wi
I cannot connect to either, either.
Code: Select all
[04:48:03] + Attempting to send results [April 5 04:48:03 UTC]
[04:48:04] - Couldn't send HTTP request to server
[04:48:04] + Could not connect to Work Server (results)
[04:48:04] (171.64.65.111:8080)
[04:48:04] + Retrying using alternative port
[04:48:06] - Couldn't send HTTP request to server
[04:48:06] + Could not connect to Work Server (results)
[04:48:06] (171.64.65.111:80)
[04:48:06] - Error: Could not transmit unit 09 (completed April 3) to work server.
[04:48:06] - Read packet limit of 540015616... Set to 524286976.
[04:48:06] + Attempting to send results [April 5 04:48:06 UTC]
[04:48:06] - Couldn't send HTTP request to server
[04:48:06] + Could not connect to Work Server (results)
[04:48:06] (171.67.108.17:8080)
[04:48:06] + Retrying using alternative port
[04:48:07] - Couldn't send HTTP request to server
[04:48:07] + Could not connect to Work Server (results)
[04:48:07] (171.67.108.17:80)
[04:48:07] Could not transmit unit 09 to Collection server; keeping in queue
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Mon Apr 05, 2010 8:47 am
by KroontjesPen
Last night, local time, lot of work is successfully accepted.
Only this combination of servers didn't the job.
For information I put here lot of data from my log file.
The PC is still in pause but I take the chance to go on work here and maybe lose:
Slot 07 Done
Project: 6314 (Run 392, Clone 19, Gen 13), Core: 78
Work server: 171.64.65.111:8080
Collection server: 171.67.108.17
Download date: April 2 11:00:27
Finished date: April 3 02:33:59
Failed uploads: 6
We shall see.
Code: Select all
PF: 0.988563 based on last 4 slot(s)
[17:59:04] Writing local files
[17:59:04] Completed 2475000 out of 2500000 steps (99%)
[18:01:05] Writing local files
[18:01:05] Completed 2500000 out of 2500000 steps (100%)
[18:01:05] Writing checkpoint files
[18:02:05]
[18:02:05] Finished Work Unit:
[18:02:05] Leaving Run
[18:02:10] - Writing 224218 bytes of core data to disk...
[18:02:10] ... Done.
[18:02:10] - Shutting down core
[18:02:10]
[18:02:10] Folding@home Core Shutdown: FINISHED_UNIT
[18:02:13] CoreStatus = 64 (100)
[18:02:13] Sending work to server
[18:02:13] + Closed connections
[18:02:13] + Paused after finishing unit
[18:06:47] Opening http://foldingforum.org/...
[18:06:58] + Could not connect to Work Server (results)
[18:06:58] (171.67.108.17:80)
[18:06:58] Could not transmit unit 07 to Collection server; keeping in queue.
[19:22:33] Opening http://foldingforum.org/...
[19:25:26] Opening http://foldingforum.org/...
[21:26:14] Opening http://foldingforum.org/...
[00:06:59] Project: 4605 (Run 9, Clone 194, Gen 5)
[00:06:59] - Read packet limit of 540015616... Set to 524286976.
[00:06:59] + Attempting to send results [April 5 00:06:59 UTC]
[00:07:03] + Results successfully sent
[00:07:03] Thank you for your contribution to Folding@Home.
[00:07:03] + Number of Units Completed: 76
[00:07:04] Project: 4605 (Run 37, Clone 152, Gen 18)
[00:07:04] - Read packet limit of 540015616... Set to 524286976.
[00:07:04] + Attempting to send results [April 5 00:07:04 UTC]
[00:07:07] + Results successfully sent
[00:07:07] Thank you for your contribution to Folding@Home.
[00:07:07] + Number of Units Completed: 77
[00:07:09] Project: 4609 (Run 37, Clone 178, Gen 0)
[00:07:09] - Read packet limit of 540015616... Set to 524286976.
[00:07:09] + Attempting to send results [April 5 00:07:09 UTC]
[00:07:12] + Results successfully sent
[00:07:12] Thank you for your contribution to Folding@Home.
[00:07:12] + Number of Units Completed: 78
[00:07:13] Project: 6314 (Run 392, Clone 19, Gen 13)
[00:07:13] - Read packet limit of 540015616... Set to 524286976.
[00:07:13] + Attempting to send results [April 5 00:07:13 UTC]
[00:07:15] - Couldn't send HTTP request to server
[00:07:15] + Could not connect to Work Server (results)
[00:07:15] (171.64.65.111:8080)
[00:07:15] + Retrying using alternative port
[00:07:16] - Couldn't send HTTP request to server
[00:07:16] + Could not connect to Work Server (results)
[00:07:16] (171.64.65.111:80)
[00:07:16] - Error: Could not transmit unit 07 (completed April 3) to work server.
[00:07:16] - Read packet limit of 540015616... Set to 524286976.
[00:07:16] + Attempting to send results [April 5 00:07:16 UTC]
[04:40:17] + Could not connect to Work Server (results)
[04:40:17] (171.67.108.17:8080)
[04:40:17] + Retrying using alternative port
[08:19:46] Printing Queue Information
Current Queue:
Slot 07 Done
Project: 6314 (Run 392, Clone 19, Gen 13), Core: 78
Work server: 171.64.65.111:8080
Collection server: 171.67.108.17
Download date: April 2 11:00:27
Finished date: April 3 02:33:59
Failed uploads: 6
Slot 08 Empty/Deleted
Project: 4604 (Run 19, Clone 143, Gen 33), Core: 82
Work server: 169.230.26.30:8080
Collection server: 171.65.103.100
Download date: April 3 09:22:25
Finished date: April 3 16:04:36
Slot 09 Empty/Deleted
Project: 4606 (Run 23, Clone 169, Gen 2), Core: 82
Work server: 169.230.26.30:8080
Collection server: 171.65.103.100
Download date: April 3 16:16:26
Finished date: April 3 19:20:45
Slot 00 Empty/Deleted
Project: 4605 (Run 11, Clone 102, Gen 43), Core: 82
Work server: 169.230.26.30:8080
Collection server: 171.65.103.100
Download date: April 3 20:19:50
Finished date: April 3 20:20:00
Slot 01 Empty/Deleted
Project: 4605 (Run 11, Clone 102, Gen 43), Core: 82
Work server: 169.230.26.30:8080
Collection server: 171.65.103.100
Download date: April 3 20:20:02
Finished date: April 3 20:20:18
Slot 02 Empty/Deleted
Project: 4614 (Run 22, Clone 191, Gen 18), Core: 82
Work server: 169.230.26.30:8080
Collection server: 171.65.103.100
Download date: April 3 20:20:20
Finished date: April 4 00:41:04
Slot 03 Empty/Deleted
Project: 4615 (Run 20, Clone 149, Gen 53), Core: 82
Work server: 169.230.26.30:8080
Collection server: 171.65.103.100
Download date: April 4 00:41:38
Finished date: April 4 07:35:59
Slot 04 Empty/Deleted
Project: 4605 (Run 9, Clone 194, Gen 5), Core: 82
Work server: 169.230.26.30:8080
Collection server: 171.65.103.100
Download date: April 4 07:53:25
Finished date: April 4 11:56:09
Slot 05 Empty/Deleted
Project: 4605 (Run 37, Clone 152, Gen 18), Core: 82
Work server: 169.230.26.30:8080
Collection server: 171.65.103.100
Download date: April 4 11:56:12
Finished date: April 4 14:36:11
Slot 06 *Empty/Deleted
Project: 4609 (Run 37, Clone 178, Gen 0), Core: 82
Work server: 169.230.26.30:8080
Collection server: 171.65.103.100
Download date: April 4 14:57:04
Finished date: April 4 18:02:13
PF: 0.988841 based on last 4 slot(s)
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Mon Apr 05, 2010 10:33 am
by faerie
Me too. I can't connect to either server and have completed work units waiting to be uploaded.
[02:18:33] + Attempting to send results [April 5 02:18:33 UTC]
[02:18:35] - Couldn't send HTTP request to server
[02:18:35] + Could not connect to Work Server (results)
[02:18:35] (171.64.65.111:8080)
[02:18:35] + Retrying using alternative port
[02:18:36] + Attempting to send results [April 5 02:18:36 UTC]
[02:18:37] - Couldn't send HTTP request to server
[02:18:37] (Got status 503)
[02:18:37] + Could not connect to Work Server (results)
[02:18:37] (171.67.108.17:8080)
[02:18:37] + Retrying using alternative port
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Mon Apr 05, 2010 11:43 am
by preet.to
Thanks Endrik, I have played with the config. Tried kasson's _alt version, nothing. These are production machines and so we do not want to run the whosyourdaddy solution. It was hard enough to agree to FAH as external software.
The best thing for me is a new fah6 client which has the proper libs for a fedora 12. Then I can dump the classic for good.
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Mon Apr 05, 2010 12:45 pm
by KroontjesPen
There's no work lost for now.
New work is all ready finish and send in.
By trying to send in slot 7 again it seems to blocking receiving new work.
For now I shall do nothing to see if everything is solving automaticly
Edit.
Extra information [15:48:16].
Code: Select all
PF: 0.988841 based on last 4 slot(s)
[08:29:58] Opening http://foldingforum.org/...
[08:48:26] - Preparing to get new work unit...
[08:48:26] + Attempting to get work packet
[08:48:27] - Connecting to assignment server
[08:48:28] - Successful: assigned to (169.230.26.30).
[08:48:28] + News From Folding@Home: Welcome to Folding@Home
[08:48:28] Loaded queue successfully.
[08:48:29] + Closed connections
[08:48:29]
[08:48:29] + Processing work unit
[08:48:29] Core required: FahCore_82.exe
[08:48:29] Core found.
[08:48:29] Working on queue slot 08 [April 5 08:48:29 UTC]
[08:48:29] + Working ...
[08:48:29]
[08:48:29] *------------------------------*
[08:48:29] Folding@Home PMD Core
[08:48:29] Version 1.03 (September 7, 2005)
[08:48:29]
[08:48:29] Preparing to commence simulation
[08:48:29] - Looking at optimizations...
[08:48:29] - Created dyn
[08:48:29] - Files status OK
[08:48:29] - Expanded 10119 -> 63642 (decompressed 628.9 percent)
[08:48:29]
[08:48:29] Project: 4605 (Run 41, Clone 176, Gen 17)
[08:48:29]
[08:48:29] Assembly optimizations on if available.
[08:48:29] Entering M.D.
[08:48:35] Protein: p4605_T0_proA-8_minout
[08:48:35]
[08:48:35] Completed 0 out of 2500000 steps (0%)
[08:50:00] Writing local files
[08:50:00] Completed 25000 out of 2500000 steps (1%)
.........
.......
[09:11:31] Completed 400000 out of 2500000 steps (16%)
[09:11:31] Writing checkpoint files
[09:12:59] Writing local files
[09:12:59] Completed 425000 out of 2500000 steps (17%)
[09:13:17] + Could not connect to Work Server (results)
[09:13:17] (171.67.108.17:80)
[09:13:17] Could not transmit unit 07 to Collection server; keeping in queue.
[09:14:26] Writing local files
[09:14:26] Completed 450000 out of 2500000 steps (18%)
[09:14:26] Writing checkpoint files
[09:15:53] Writing local files
[09:15:53] Completed 475000 out of 2500000 steps (19%)
.............
........
[11:13:59] Completed 2500000 out of 2500000 steps (100%)
[11:13:59] Writing checkpoint files
[11:14:59]
[11:14:59] Finished Work Unit:
[11:14:59] Leaving Run
[11:15:00] - Writing 189396 bytes of core data to disk...
[11:15:00] ... Done.
[11:15:00] - Shutting down core
[11:15:00]
[11:15:00] Folding@home Core Shutdown: FINISHED_UNIT
[11:15:04] CoreStatus = 64 (100)
[11:15:04] Sending work to server
[11:15:04] Project: 4605 (Run 41, Clone 176, Gen 17)
[11:15:04] - Read packet limit of 540015616... Set to 524286976.
[11:15:04] + Attempting to send results [April 5 11:15:04 UTC]
[11:15:08] + Results successfully sent
[11:15:08] Thank you for your contribution to Folding@Home.
[11:15:08] + Number of Units Completed: 79
[11:15:12] Project: 6314 (Run 392, Clone 19, Gen 13)
[11:15:12] - Read packet limit of 540015616... Set to 524286976.
[11:15:12] + Attempting to send results [April 5 11:15:12 UTC]
[11:15:14] - Couldn't send HTTP request to server
[11:15:14] + Could not connect to Work Server (results)
[11:15:14] (171.64.65.111:8080)
[11:15:14] + Retrying using alternative port
[11:15:15] - Couldn't send HTTP request to server
[11:15:15] + Could not connect to Work Server (results)
[11:15:15] (171.64.65.111:80)
[11:15:15] - Error: Could not transmit unit 07 (completed April 3) to work server.
[11:15:15] - Read packet limit of 540015616... Set to 524286976.
[11:15:15] + Attempting to send results [April 5 11:15:15 UTC]
[12:32:34] Opening http://foldingforum.org/...
[15:48:16] + Could not connect to Work Server (results)
[15:48:16] (171.67.108.17:8080)
[15:48:16] + Retrying using alternative port
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Mon Apr 05, 2010 7:24 pm
by amuro.ID
good news. Looks like server 171.64.65.111 can accepting results now.
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Mon Apr 05, 2010 7:54 pm
by endrik
Yup, mine went off too. I can imagine the stress on this server for several coming hours
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Mon Apr 05, 2010 8:11 pm
by bruce
endrik wrote:I can imagine the stress on this server for several coming hours
You can see that clearly on
http://fah-web.stanford.edu/serverstat.html
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Mon Apr 05, 2010 8:16 pm
by preet.to
Patience pays off. Now about the Fedora 12 issue ...
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Tue Apr 06, 2010 12:15 am
by anko1
KroontjesPen wrote:Last night, local time, lot of work is successfully accepted.
Only this combination of servers didn't the job.
For information I put here lot of data from my log file.
The PC is still in pause but I take the chance to go on work here and maybe lose:
Slot 07 Done
Project: 6314 (Run 392, Clone 19, Gen 13), Core: 78
Work server: 171.64.65.111:8080
Collection server: 171.67.108.17
Download date: April 2 11:00:27
Finished date: April 3 02:33:59
Failed uploads: 6
We shall see.
The moderators can correct me, but if you're worried about losing a completed WU b/c it gets over written, my understanding is that the program knows to skip occupied slots.
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Tue Apr 06, 2010 12:16 am
by tonic
Can't get any WUs through....
Code: Select all
00:15:04] + Could not connect to Work Server (results)
[00:15:04] (171.67.108.17:8080)
[00:15:04] Could not transmit unit 09 to Collection server; keeping in queue.
[00:15:09] + Attempting to get work packet
[00:15:09] - Connecting to assignment server
[00:15:09] + No appropriate work server was available; will try again in a bit.
[00:15:09] + Couldn't get work instructions.
[00:15:09] - Attempt #2 to get work failed, and no other work to do.
Waiting before retry.
[00:15:31] + Attempting to get work packet
[00:15:31] - Connecting to assignment server
[00:15:32] + No appropriate work server was available; will try again in a bit.
[00:15:32] + Couldn't get work instructions.
[00:15:32] - Attempt #3 to get work failed, and no other work to do.
Waiting before retry.
[00:15:57] + Attempting to get work packet
[00:15:57] - Connecting to assignment server
[00:15:58] + No appropriate work server was available; will try again in a bit.
[00:15:58] + Couldn't get work instructions.
[00:15:58] - Attempt #4 to get work failed, and no other work to do.
Waiting before retry.
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Tue Apr 06, 2010 12:23 am
by tonic
Guessing this is because 171.64.65.111 is in reject right now.
171.64.65.111:8080 still doesn't load in a browser, looks like it's been ~2 days since this client has connected...
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Tue Apr 06, 2010 3:35 pm
by endrik
Looks like I was a bad prophet and the stress mentioned several posts above was too much to absorb. All we need is just a little bit more patience
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Wed Apr 07, 2010 5:08 am
by Baowoulf
Well I'm in the same predictment now lol. 2 WU's finish(which 1 has been waiting for a couple of days) and can't send too 171.64.65.111 and couldn't get any work for a while. I just got a WU a couple mins ago.
Any info on the status of the servers? I've been checking the news page but it hasn't been updated yet.
hisui wrote:Both server can't be accessed via browser.171.64.65.111:8080 is time out,171.67.108.17:8080 is an blank page with no"OK"sign or
an error message returned from browser"The service is overloaded or offline. Please try again later."
According to server status page 171.64.65.111 is not accepting in standby mode but 171.67.108.17 is working
With me it just says,
"The webpage cannot be displayed
Most likely caused:
Some content or files on this webpage require a program that you don't have installed."
anko1 wrote:The moderators can correct me, but if you're worried about losing a completed WU b/c it gets over written, my understanding is that the program knows to skip occupied slots.
I think it will only override a slot if there are no slots free and it will most likely override the oldest WU first.
Re: Can't connect 171.67.108.17 and 171.64.65.111
Posted: Wed Apr 07, 2010 5:40 am
by bruce
Baowoulf wrote:Well I'm in the same predictment now lol. 2 WU's finish(which 1 has been waiting for a couple of days) and can't send too 171.64.65.111 and couldn't get any work for a while. I just got a WU a couple mins ago.
Which server did you get an assignment from? 171.67.108.17 is a collection server, so it shouldn't have any WUs to distribute and as far as I know, 171.64.65.111 has not yet been repaired.
Did you read and follow the instructions here?
Subject: Do this first
Any info on the status of the servers? I've been checking the news page but it hasn't been updated yet.
That's because somebody is working hard to correct whatever is wrong and the only thing anybody can tell you is that it will be fixed whenever they finish.
With me it just says,
"The webpage cannot be displayed
Most likely caused:
Some content or files on this webpage require a program that you don't have installed."
That's exactly what you would expect when the Connection Status is "Reject"